• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Electric field and force characteristic of dust aerosol particles on the surface of high-voltage transmission line

    2024-01-25 07:12:40YinggeLiu劉瀅格XingcaiLi李興財JuanWang王娟XinMa馬鑫andWenhaiSun孫文海
    Chinese Physics B 2024年1期
    關(guān)鍵詞:文海王娟

    Yingge Liu(劉瀅格), Xingcai Li(李興財),?, Juan Wang(王娟),2,Xin Ma(馬鑫), and Wenhai Sun(孫文海)

    1School of Physics,Ningxia University,Yinchuan 750021,China

    2Xinhua College of Ningxia University,Yinchuan 750021,China

    3School of Electronic-Electrical Engineering,Ningxia University,Yinchuan 750021,China

    Keywords: high-voltage current,electric field,aerosol particles,force characteristic

    1.Introduction

    With the advancements in solar and wind power generation technologies, high-voltage direct current (HVDC) transmission technology has gained widespread use for longdistance power transmission due to its specific advantages.[1]The development of HVDC transmission systems plays a crucial role in enabling efficient power transmission, facilitating the interconnection of diverse alternating current (AC) and direct current (DC) systems, and promoting the integration of renewable energy sources.[2,3]The construction and operation of ultra-high voltage (UHV) and extra-high voltage(EHV) DC transmission lines have brought significant attention to the environmental issues associated with corona discharge from the conductors of DC transmission lines.[4,5]Consequently, numerous scholars both domestically and internationally have undertaken extensive research on calculating the total electric field on the ground of DC transmission lines.They have proposed calculation methods based on Deutsch’s assumption,[6–9]finite element method,[10–12]finite difference method,[13]and simulated charge method,[14,15]which provide vital technical support.

    The issue of atmospheric pollution resulting from economic and social development is progressively deteriorating.[16]The accumulation of substantial amounts of fine particulate matter in the air can adhere to the surface of highvoltage transmission lines,thereby significantly impacting the surface morphology of the conductors.Additionally,this phenomenon can exacerbate corona discharge of the transmission lines, leading to alterations in their surrounding electromagnetic environment[17]and resulting in increased operational and maintenance costs.[18]Chalmers[19]initially discovered that airborne particulate matter influences the ambient electric field through charged interactions.Furthermore,Li’s research[20]demonstrated that strong electric fields acting upon particles significantly affects the optical characteristics of sand particles.These findings are significant for analyzing laboratory data and remotely sensed information related to parameters of sandstorm and rain-cloud.

    Qian[21]developed a formula, based on the assumptions of Deutsch and Kaptzov,[22]for calculating the total electric field on the ground under sandy and dusty conditions.Additionally, Qian conducted a comprehensive study and analysis on the impact of these conditions on the electromagnetic environment surrounding the transmission line.Wanget al.[23]investigated the impact of fouling particles on the electric field surrounding high-voltage conductor.Specifically,they examined the influence of four particle shapes (conical, cylindrical, spherical, and hemispherical) as well as their relative dielectric constants on the maximum electric field strength at the surface of the conductor.The simulation results revealed that factors such as the length(radius)and apex angle of fouling protrusion, along with the dielectric constant of the contaminant, significantly influence the electric field strength at the contaminated conductor.Lüet al.[24]employed finite element software to simulate the electric field distribution on a simulated conductor.The findings indicated that the maximum electric field strength at the apex of fouling particles exhibited an upward trend in response to higher relative dielectric constants.Conversely, the reduction occurred as the size of spherical fouling particles increased, whereas it exhibited an increase with the enlargement of conical fouling particle dimensions.Guet al.[25]examined the corona characteristics of the conductor surface by employing simulated dirt and toner particles with varying surface densities.The researchers specifically investigated the influence of dirt on the corona behavior of a±800-kV EHV DC transmission line using corona cages for experimentation.By combining experimental findings and simulation studies,a preliminary relationship was established between the corona onset voltage and the degree of surface contamination on the conductor of the±800-kV EHV DC transmission line.Maet al.[26]conducted an experiment focused on dirt coating using a compact corona cage.Their findings revealed that proximity to dirt material led to a significant increase in ion current and audible noise on the positively charged conductor of a±500-kV EHV DC transmission line due to enhanced electric field strength near its surface.Furthermore,they employed both corona images and corona pulse measurement data to elucidate the factors contributing to the changes in contaminated conductor’s observed corona characteristics.Liuet al.[27]employed a combination of eccentric dipole method and charge simulation method to determine the electric field distribution near conductor exposed to sand and dust particles.The results suggest that dust particles significantly distort the electric field surrounding the transmission line,with larger dust particles exerting a more pronounced impact on the spatial electric field at equivalent distances.Additionally,when sand particles are in close to the transmission line,the surface field strength of dust particles increases to approximately double the original field strength observed in the absence of dust.

    It can be seen that the majority of existing studies primarily focus on the ground total field strength,[28,29]the electromagnetic environment characteristics surrounding high-voltage AC and DC conductors without adhering particles,[30–33]and analysis of insulator electric field.[34–36]However, there are fewer studies on the electromagnetic environment characteristics on the surface of high-voltage DC conductors with varying degrees of particles adhering.[37,38]Furthermore,it should be noted that the adhesion of particles to the conductor’s surface significantly impacts its wind deviation law.[39]Wind deviation poses an additional challenge for conductors serving in windy areas as it may result in tripping phenomena.The adsorption of complex atmospheric particles on the conductor’s surface can alter its properties and kinetic characteristics.Moreover, it has potential to corrode the protection layer of the conductor, thereby affecting its lifespan.Therefore, accurate prediction and assessment of conductor surface fouling state are crucially significant for the maintenance of transmission line.

    Following this, several scholars have carried out researches on the characteristics of atmospheric particulate matter in the vicinity of high-voltage transmission line.Maet al.[40]investigated the impact of atmospheric particles on the three-dimensional total electric field beneath the UHV DC transmission line and provided a briefly analysis of particles forces and motions.The results show that these particles significantly distort the total electric field at ground level, with peak field enhancement area reaching 2–3 times their original values.Furthermore, the adsorption of particles on the transmission line is determined by their respective force.Zhanget al.[41]established a three-dimensional model to simulate the accumulation of pollutants on insulator strings under DC composite electric field.The results demonstrate that specific composite electric field result in maximum pollutant accumulation on the insulator string.When nominal electric fields near insulator string are excessively high, pollutant accumulation increases on the lower surface of insulator sheds while decreasing with weakening ion flow field.

    In the arid and consistently dry region prone to desertification,particles are influenced significantly by gravity,electrostatic force,van der Waals force,and fluid force.Therefore,it is crucial to investigate the electric field distribution on the surface of HVDC conductors and the forces exerted on particles under different fouling conditions in order to achieve more accurate predictions of fouling characteristics in both UHV and UHV DC conductors.With this objective in mind, the present study systematically investigates the impact of transmission line fouling on the electric field near the transmission line as well as the forces affecting the particles.Additionally,it examines the potential occurrence of transmission line fouling at various locations.

    2.HVDC transmission line model

    2.1.Geometric model

    This study presents a modeling approach utilizing 1:1 geometric modeling and hybrid meshing to simulate the distribution of electric field on the surface of an HVDC transmission line under fouling conditions.The computational domain is discretized and solved separately for each sub-conductor’s surface.To enhance computational efficiency, the following assumptions are applied in the calculation of the transmission line.(i) It is assumed that the split conductors are infinitely long smooth conductors with identical radii.They are arranged in parallel to each other and parallel to the Earth’s surface.(ii) Considering that the actual transmission frequency used in China falls within the range of the shallow frequency field, where the distance between observation point near the calculated field and conductor is significantly smaller than the wavelength of the electric field propagating in air, it can be considered quasi-static.Therefore,this simulation focuses on calculating the electric field strength on the surface of the highvoltage DC transmission line.(iii) This model simplifies the analysis by disregarding influence from surrounding environment and arc sag, treating them as a two-dimensional (2D)representation.Consequently, simplified calculation for electric fields is treated as a 2D field.

    The distribution of the electric field on the surface of a high-voltage transmission line is addressed as an open-region problem.In this study,the finite element method is employed,and artificial boundaries are established at a certain distance from the transmission conductors.Considering the conductive nature of the Earth,we set the potential value at the artificial boundary corresponding to ground as zero.To ensure that the air domain boundary(i.e.,the computational field domain)simulates an infinite distance, a virtual domain consisting of infinite elements is introduced beyond the artificial boundary.Subsequently, we establish a transmission line model assuming clean conditions without adhering particles.The computational domain for this model is depicted in Fig.1.By introducing a layer thickness, we transform the open-region problem into a finite field, effectively resolving challenges associated with calculating electric field in infinite space.

    Fig.1.Schematic diagram of the computational domain of the transmission line model.

    The parameters of the HVDC transmission line model are shown in Table 1.

    Table 1.HVDC transmission line model parameter.

    Fig.2.Arrangement of monopole 4 split transmission lines:(a)the type I of arrangement,(b)the type II of arrangement.

    According to the spatial domain selection method proposed by Wanget al.[42]for calculating the electric field strength of conductors,and considering the average cell mass and calculation rate of the grid, this paper finally determines the computational domain for modeling the electric field of a 4-division DC transmission line within a 210 m×136 m region.The comparative analysis diagram illustrating the selection of computational domain is shown in Fig.3.From the diagram,it can be observed that the model with the computational domain of 210 m×136 m has the highest average cell mass and minimum cell mass, while also reducing computation time and improving model efficiency due to fewer domain cells.Figure 4(a) depicts the structure of a clean transmission line, while figures 4(b)–4(d) illustrate different particle adhesion scenarios: single particles adhering,double particles adhering, and “triangular” arrangement of particles respectively.The size of the computational domain remains constant throughout subsequent calculations.

    Fig.3.Comparative analysis chart of computational domain selection.

    Fig.4.Schematic diagram of the geometric model of clean conductors and conductors under fouling conditions: (a) geometric model of the clean wire,(b)geometric model of single particle fouling layer with different radii,(c) geometric model of two-particle fouling layer with different spacings,(d) geometric model of the three-particle fouling layer of “triangular” arrangement.

    2.2.Grid division and its quality

    In the process of grid planning,a highly refined triangular grid is utilized to discretize the conductors and their surrounding areas, with a significantly smaller size compared to the radius of the split conductors.The employed grid for the infinite element domain is a structured grid that facilitates radial mapping,enabling as accurate representation of the properties at infinity within the infinite element domain.After implementing modifications to the grid, the final model comprises 21459 domain cells and 369 boundary cells,featuring a minimum cell mass of 0.5411 and an average cell mass of 0.8773.Figure 5 depicts the results of the grid discretization.

    Fig.5.The grid profile of the clean transmission line electric field calculation model.

    2.3.Boundary conditions and model solving

    In this paper, the boundary conditions are established to fulfill the requirements of the charge conservation equation(Eq.(1))and the electric field instanton relationship(Eq.(2)):

    The earth serves as the natural boundary,and a rectangular artificial boundary is implemented around the transmission line.The length of the artificial boundary is approximately 20 times the pole spacing of the transmission line, while the height of the artificial boundary measures twice the height of the transmission line’s center from the ground.Additionally, a layer thickness of 10 m is established beyond the artificial boundary of the infinite element domain, ensuring the proximity of the air domain’s boundary to an infinite distance,aligning with real-world conditions.In conclusion,within the calculation area outside of conductor,the following boundary conditions are established:(i)The potential of the earthφ=0.(ii)The potential on the surface of the conductorφequals the voltage magnitude of the transmission line.(iii) The potential magnitude at the artificial boundary is discretized using the finite element method to obtain numerical solutions for each node.Ultimately,the electric field strength in this HVDC transmission line model can be determined based on these potential values.

    2.4.Electric field verification

    The reliability of the computational domain settings in the numerical simulation is evaluated by constructing a transmission line model using the precise dimensions employed by Han.[43]A comparative analysis is conducted between this model and the findings reported in the reference, resulting in the verification comparison graph depicted in Fig.6.As depicted in the figure, the electric field intensity on the surface of each sub-conductor closely aligns with and conforms to the expected field intensity distribution pattern around the split conductor.

    Fig.6.Comparison chart of model validation results.

    3.Electric field distribution

    3.1.Clean transmission line around the electric field distribution

    To 4-split conductor of the second type of arrangement as an example, calculated as shown in Fig.7 to obtain the twodimensional electric field cloud atlas around the high-voltage transmission line, from the figure can be seen that the field strength along the surface of the transmission line approximately sinusoidal law changes, the maximum electric field strength on each sub-conductor appears in the direction of the geometric center of the split conductor and sub-conductor center line on the outer surface of the transmission line.In contrast, the minimum value generally appears on the inner surface.

    Fig.7.Electric field cloud atlas around the clean transmission line.

    The 800-kV high-voltage DC transmission line is selected for this study, and its electric field mode contour distribution is shown in Fig.8.Among them, figure 8(a) shows the electric field mode contours of the monopole 4-split transmission line, and figure 8(b) shows the electric field mode contours of subconductor 1.From Fig.8(a), it can be found that the field strength value of the nominal electric field at the center of the conductor is almost zero; the electric field strength changes significantly in the range after about 200 mm from the center;the phenomenon of the surge and sudden decrease occurs in the range of 200 mm–300 mm according to the center,that is,the electric field around the conductor produces a sharp change, which is prone to corona discharge phenomenon and the corresponding total electric field effect.From Fig.8(b)we observed that the split sub-conductor,due to the electric field shielding effect,forms a closed circle around it(which is electric field mode contour),the split sub-conductor inside the field strength value is close to 0, while the split transmission line geometric center and each sub-conductor center line direction of the outer surface of the transmission line appeared the maximum value of electric field strength,through the corresponding calculation, the maximum electric field strength value of 25.67 kV/cm.

    Fig.8.Electric field mode contour distribution map: (a) 4-split transmission line around the electric field contour distribution, (b) electric field contour distribution around sub-conductor 1.

    3.2.Single particle fouling layer around the electric field intensity distribution

    Owing to the presence of the “electrostatic dust absorption effect”in DC transmission lines,charged particles in the air experience a continuous directional electric field force,causing them to adhere to the surface of the transmission line.Additionally, the corona effect generated by the transmission line results in the accumulation of numerous charged particles in its vicinity.These particles bind with dust and other contaminants,thereby hastening the process of particulate deposition.

    This section focuses on calculating and analyzing the changes in the top field strength for four distinct shapes of sand particles that are directly adhered to sub-conductor 1 based on their radii.Figure 9 illustrates the trends in top field strength variation for spherical, hemispherical, semi-ellipsoidal, and conical sand particles at various protrusion lengths.It is evident that among the different sand particle types,conical and semi-ellipsoidal particles exhibit significant electric field distortions, followed by spherical particles, while hemispherical particles demonstrate the least distortion.

    For conical sand particles,when the diameter of the conical bottom remains constant, the maximum field strength at the top gradually increases with height.Similarly, for semiellipsoidal sand particles, when the short axis of the ellipsoid is fixed,the maximum field strength at the top gradually increases with the semi-major axis.Conversely, both hemispherical and spherical sand particles experience a gradual decrease in the maximum field strength at the top as their size increases, with the rate of decrease diminishing over time.Specifically,considering spherical particles as an example,the field strength at the top progressively decreases and eventually stabilizes at approximately 49.22 kV/cm,as depicted in Fig.9.

    Fig.9.The variation curves of the top field strength of particles with different shapes with the protrusion length.

    3.3.Electric field intensity distribution around the double particle fouling layer

    Fig.10.Electric field cloud atlas around double particles at different spacings.

    This section calculates the electric field intensity on the sub-conductor’s surface under the influence of a fouling layer consisting of double particles (particle size: 0.01 mm) with varying spacings.The resulting distribution of electric field intensities is depicted in Fig.10.As observed in the figure,when the two particles are in contact (Fig.10(a)), they significantly impact the electric field strength on the transmission line’s surface, approximately doubling the surface field strength when no particles adhere.However,the effect on the surface field strength of the transmission line with adhered single particles remains relatively consistent, at approximately 1.03 times.As the distance between the two particles increases,the electric field strength around the transmission line progressively decreases.When the particle distance exceeds 15 times the particle size,the field strength becomes comparable to that of a particle-free transmission line’s surface.

    3.4.The electric field intensity distribution around the three-particle fouling layer of “triangular” arrangement

    This section calculates the electric field strength on the surface of the sub-conductor under the influence of a threeparticle fouling layer arranged in a triangular configuration,as illustrated in Fig.11.The figure reveals that the presence of three particles in the dirt layer surrounding the sub-conductor has a greater impact on the field strength compared to the contact between two particles in the dirt layer.Specifically, the maximum field strength at the tip of the three-particle dirt layer is approximately 1.44 times that of the double particles and about 1.5 times that of a single particle.These findings suggest that particles adhering to the transmission line surface are more prone to absorbing charged particles.

    Fig.11.Electric field cloud atlas around multiple particles in contact with each other: (a)electric field around two particles with zero spacing,(b)electric field around three particles stacked in a“triangular”pattern.

    4.Particle adsorption and its force analysis

    4.1.Electric field intensity of single particle at different locations on the surface of the sub-conductor

    Fig.12.Eight-way single particle model and its surface field intensity distribution cloud atlas:(a)particle surface field intensity distribution at orientation 7,(b)particle surface field intensity distribution at orientation 8,(c)particle surface field intensity distribution at orientation 1,(d)particle surface field intensity distribution at orientation 6,(e)particle adsorption orientation model,(f)particle surface field intensity distribution at orientation 2,(g)particle surface field intensity distribution at orientation 5, (h) particle surface field intensity distribution at orientation 4, (i) particle surface field intensity distribution at orientation 3.

    By referring to Figs.7 and 8, it becomes evident that the outer surface of the transmission line experiences the highest electric field intensity (referred to as orientation 1 in Fig.12(e)).This orientation aligns with the connecting line between the split transmission line’s geometric center and the center of each sub-conductor.Conversely, the lowest electric field intensity occurs on the inner side of the split subconductor(referred to as orientation 5 in Fig.12(e)).Notably,orientations 3 and 7 in Fig.12(e)represent areas of strong and weak electric field intensity junctions, respectively.Consequently,this section establishes separate models for eight orientations (1–8) of 0.01 mm single particles on the surface of sub-conductor 1, as depicted in Fig.12(e).The calculations yield an electric field intensity cloud atlas around the single particle for each orientation(1–8),presented in panels(a)–(d)and(f)–(i).

    Based on Fig.12, it is evident that the overall distribution of field intensity around the split transmission line remains consistent even after particle adsorption.Orientation 1 exhibits the maximum electric field intensity on the surface of the split conductor,measuring 61.14 kV/cm,which is approximately 2.4 times higher than the maximum electric field intensity when no particles are present.Conversely, orientation 5 represents the minimum electric field intensity on the surface of the split conductor,measuring 44.70 kV/cm,approximately 2.6 times lower than the minimum electric field intensity in the absence of adhering particles.Orientations 3 and 7 correspond to the intersections of strong and weak spatial field strengths,measuring 58.44 kV/cm and 57.29 kV/cm,respectively.Additionally,the field strengths outside the geometric center of the line exceed those on the inside.

    4.2.Force on single particles at different locations on the sub-conductor surface

    In deserted areas, the “electrostatic dust absorption effect” of DC transmission line is pronounced, so it is crucial to scientifically understand and analyze the force on dust particles.[44–46]In this section,the force on particles at different locations under the influence of the electrostatic field of high voltage transmission line is discussed based on theoretical analysis(Fig.13).

    Fig.13.Force analysis of particles on the surface of sub-conductors.

    The forces on the surface of the transmission line road conductor sand should mainly include gravity, van der Waals force, electrostatic force, and so on.The specific calculation formula is as follows.

    (i)Gravity

    whereGis the gravity of dust particlesN;ρis the density of dust particles(SiO2)ρ=2.2×103kg/m3;gis the acceleration of gravity,Yinchuan is located at 38°20',and its gravitational acceleration is taken asg=9.832 N/kg.

    (ii)Van der Waals force

    In a dry environment, micron-sized particles are mainly affected by van der Waals forces in addition to other field forces in the collision process and adhesion behavior.[47,48]Since the radius of the particles is much smaller than the radius of the transmission line,the fouling particles and the transmission line are approximated as a model of a sphere and an infinitely thick plate,[49]and the van der Waals forces satisfied by the particles are obtained as

    whereHis the Hamaker constant,which is related to the material properties.The Hamaker constant for the interaction of SiO2particles and Cu transmission lines in a vacuum(this section derives the equation treating air as a vacuum)is calculated from the Hamaker constant for the interaction of SiO2and Cu respectively in a vacuum (as in Eq.(5)).Ris the particle radius.Dis the minimum distance between the spherical particles and the contact planeD=1×10?8m.[50]

    whereHSiO2=1.5×10?19J andHCu=2.84×10?19J.[49]

    (iii)Electrostatic force

    where the particle chargeQis given by Eq.(7)[51]and the electric field strengthEat the location of the particle is calculated through the eccentric electric dipole model.[52,53]

    Fig.14.Electric field distribution around particles under non-uniform electric field.

    This eccentric electric dipole model equates a particle in a nonuniform external electric field to an electric dipole off the center of the particle to calculate the actual field strength of the particle and the interparticle interaction force.[54]According to the electric dipole theory, the superposition of the applied field strength(i.e.,the spatial background field strength)and the electric field generated by the eccentric electric dipole is the actual field strength of the particle.From the engineering electromagnetic field theory, it is known that the actual field strength of a single particle under the action of an applied uniform electric fieldE0is shown in Eq.(8),while for a nonuniform external electric field (e.g., Fig.14), the actual field strength of the particle can be obtained after taking a zerolevel approximation(see Eq.(9)).

    whereβ=(k ?1)/(k+2),k=εp/εe,εprepresents the relative permittivity of particles,which has a value of 4.2;εeis the relative permittivity of air with a size of 1.000536.

    Fig.15.Particle force variation graph: (a) variation of force on particles at various places on the transmission line surface,(b)curve of the variation of each force on the particle at azimuth 8 with radius.

    In conclusion, the force analysis conducted on the single particle and the top particle of the“triangulartle”type resulted in a particle force variation diagram, as presented in Fig.15.Specifically,figure 15(a)illustrates the forces exerted on the surface of the sub-conductor by both the individual pellet and the“triangulartle”top pellet.Furthermore,figure 15(b)demonstrates the changes in forces acting on the single pellet as the radius varies at orientation 8.

    The analysis of Fig.15 reveals that the primary adhesion forces between particles and the transmission line in a dry environment follow the order of electrostatic force and van der Waals force.These forces are approximately 75 and 19 times greater than the gravitational force acting on the particles at the minimum field strength,respectively.Notably,the electrostatic force greatly surpasses both gravity (0.09 μN) and van der Waals force(0.35μN).This observation suggests that, in regions with high field strength,the electrostatic force induces smaller particles to detach from the surface of the transmission line.Consequently,this leads to an uneven distribution of dust accumulation on the transmission line,exacerbating the occurrence of corona phenomena and potentially giving rise to other significant environmental issues.

    4.3.Particle adsorption

    The conditions of desorption[46]of the particles on the surface of the splitter conductor can be obtained by combining Fig.15 as

    whereμis the coefficient of friction between the particle and the transmission line.

    The desorption of particles under the electric field generated by the high voltage transmission line, as described in Eq.(10)and illustrated in Fig.15,can now be discussed.From Fig.15(a),it is evident that the particles within 200°–300°are more accessible to be adsorbed than those at 0°–100°.Among all orientations,particles at orientation 5 exhibit the highest accessibility for adsorption,while those at orientation 1 demonstrate the easiest propensity for jumping.By comparing single particles with particles situated on top of the“triangular”fouling layer, it can be concluded that single particles are more susceptible to adsorption based on variations in electrostatic and van der Waals force as well as gravity.

    5.Conclusion

    The accumulation of significant quantities of fine particulate matter on the surface of high-voltage transmission lines can exacerbate corona discharge,thereby altering the electromagnetic environment surrounding the transmission line.[9,55]This study investigates the variations in electric field intensity on the segmented conductor surface caused by various fouling layers and analyzes the principles governing the adhesion of dust particles to the conductor.Additionally, it develops a comprehensive force model incorporating electrostatic force,van der Waals force,and gravity acting between dust particles and subconductors.The research findings demonstrate the following points.

    (i)The field strength along the surface of the high-voltage transmission line exhibits an approximately sinusoidal variation with the absence of adhered particles.The maximum field strength is observed towards the geometric center of the segmented transmission line and the centerline of the subconductors, on its outer surface.Conversely, the minimum field strength is typically observed on the inner surface.

    (ii)The adhesion of individual particles modifies the electric field distribution on the surface of the transmission line.As the particle size increases, there is a gradually reduction in the peak field strength at the top of the particle, eventually reaching a constant value of approximately 49.22 kV/cm.Additionally,adhered particles exhibit a maximum field strength that is approximately 1.96 times higher than non-adhered particles under similar surface field strength conditions.

    (iii)The presence of a dual particle fouling layer leads to a gradual reduction in the field strength surrounding the transmission line as the spacing between particles increases.At a particle spacing of 0, the surface field strength of the transmission line is approximately twice that of non-adhered particles.However, when the particle spacing exceeds 15 times the size of each individual particle, the surface field strength of the transmission line becomes comparable to that observed with non-adhered particles.

    (iv)The field strength at the tip of a“triangular”arrangement of three particles in the fouling layer is approximately 1.44 times higher than that of a double-particle arrangement and 1.5 times higher than that of a single particle.These findings indicate that it is more prone to adhere charged particles on the surface of the wire after adhering particles.

    (v)The primary forces responsible for adhesion between fouling particles and the transmission line are electrostatic force and Van der Waals force.The adhesion force ranges from approximately 10?10N to 10?9N.At the minimum field strength,these forces exceed the gravitational force acting on the particles by approximately 74.73 and 19.43 times,respectively.

    These results bear significant importance in accurately predicting the extent of fouling accumulation on high-voltage conductors and assessing the corresponding safety risks.

    Acknowledgements

    Project supported by the National Natural Science Foundation of China (Grant No.12064034), the Leading Talents Program of Science and Technology Innovation in Ningxia Hui Autonomous Region, China (Grant No.2020GKLRLX08), the Natural Science Foundation of Ningxia Hui Auatonomous Region, China (Grant Nos.2022AAC03643,2022AAC03117, and 2018AAC03029), the Major Science and Technology Project of Ningxia Hui Autonomous Region,China (Grant No.2022BDE03006), and the Natural Science Project of the Higher Education Institutions of Ningxia Hui Autonomous Region,China(Grant No.13-1069).

    猜你喜歡
    文海王娟
    彩插·畫家
    封三·劉文海
    The formation of adolescent performing culture in the chorus
    High adsorption and separation performance of CO2 over N2 in azo-based(N=N)pillar[6]arene supramolecular organic frameworks*
    Electrostatic force of dust deposition originating from contact between particles and photovoltaic glass?
    貧血鑒別診斷中血液檢驗的效果及作用分析
    健康之家(2021年19期)2021-05-23 09:10:44
    文海紅國畫展
    老祖宗留下來的瑰寶與絕活
    狂飆美少女
    文海江作品選
    美術(shù)界(2014年7期)2014-04-29 00:44:03
    99视频精品全部免费 在线| 麻豆乱淫一区二区| 天堂中文最新版在线下载| 久久韩国三级中文字幕| 久久精品国产鲁丝片午夜精品| 18禁裸乳无遮挡动漫免费视频| 亚洲经典国产精华液单| 免费看av在线观看网站| 欧美国产精品一级二级三级| 精品久久久久久久久亚洲| 午夜激情久久久久久久| 成人18禁高潮啪啪吃奶动态图 | 久久久久久久久大av| 精品一区二区免费观看| 久久久久久久久大av| 97超碰精品成人国产| 久久韩国三级中文字幕| 五月伊人婷婷丁香| 日韩大片免费观看网站| 亚洲中文av在线| 国产成人aa在线观看| 国产av精品麻豆| 免费av不卡在线播放| 国产69精品久久久久777片| 国语对白做爰xxxⅹ性视频网站| 国产一区二区三区av在线| 精品酒店卫生间| 性色av一级| 精品亚洲成国产av| 国产国拍精品亚洲av在线观看| 哪个播放器可以免费观看大片| 午夜免费观看性视频| 日本免费在线观看一区| 美女福利国产在线| 女性生殖器流出的白浆| 性色avwww在线观看| 欧美日韩在线观看h| 精品视频人人做人人爽| 国产成人freesex在线| 高清在线视频一区二区三区| 国产综合精华液| 日韩av不卡免费在线播放| 91精品一卡2卡3卡4卡| 久久精品国产亚洲av涩爱| 国产精品麻豆人妻色哟哟久久| 18禁观看日本| 日本欧美国产在线视频| 亚洲人成网站在线观看播放| 观看美女的网站| 久久精品国产a三级三级三级| 韩国高清视频一区二区三区| 高清av免费在线| 女性被躁到高潮视频| 亚洲精品国产色婷婷电影| 少妇人妻 视频| 18禁在线播放成人免费| 国产精品一区二区在线不卡| 亚洲av成人精品一区久久| 日韩熟女老妇一区二区性免费视频| 男人添女人高潮全过程视频| 久久久久网色| 精品一区二区三区视频在线| 久久97久久精品| 亚州av有码| 日本色播在线视频| 午夜福利在线观看免费完整高清在| 免费av不卡在线播放| 黄色欧美视频在线观看| 毛片一级片免费看久久久久| 国产一区亚洲一区在线观看| 亚洲天堂av无毛| 天堂中文最新版在线下载| 女性生殖器流出的白浆| 久久精品国产亚洲av涩爱| 欧美+日韩+精品| 久久精品熟女亚洲av麻豆精品| 国产高清三级在线| 免费黄频网站在线观看国产| 大片免费播放器 马上看| 性色av一级| 最近手机中文字幕大全| 黑人欧美特级aaaaaa片| 精品久久国产蜜桃| 日产精品乱码卡一卡2卡三| 80岁老熟妇乱子伦牲交| 18禁观看日本| 老司机影院成人| 国产男人的电影天堂91| 午夜福利影视在线免费观看| 视频中文字幕在线观看| 少妇人妻 视频| 亚洲精品美女久久av网站| 欧美成人精品欧美一级黄| 精品国产一区二区久久| 久久韩国三级中文字幕| 插逼视频在线观看| 五月天丁香电影| 黄色怎么调成土黄色| 91久久精品国产一区二区三区| 哪个播放器可以免费观看大片| 制服丝袜香蕉在线| 久久精品国产a三级三级三级| 国产男女超爽视频在线观看| 国产精品人妻久久久久久| 热re99久久精品国产66热6| 男男h啪啪无遮挡| 少妇猛男粗大的猛烈进出视频| 欧美国产精品一级二级三级| 99久久人妻综合| 男男h啪啪无遮挡| 97超视频在线观看视频| 国产欧美另类精品又又久久亚洲欧美| 亚洲欧美成人综合另类久久久| 亚洲第一区二区三区不卡| 大香蕉久久网| 日韩,欧美,国产一区二区三区| 黄色欧美视频在线观看| 精品久久久噜噜| 欧美成人精品欧美一级黄| 亚洲精品乱码久久久v下载方式| 乱码一卡2卡4卡精品| 久久这里有精品视频免费| 国产免费又黄又爽又色| 国产淫语在线视频| 欧美成人精品欧美一级黄| 久久精品国产亚洲av涩爱| 欧美成人午夜免费资源| 久久综合国产亚洲精品| 9色porny在线观看| 青春草亚洲视频在线观看| 国产视频首页在线观看| av又黄又爽大尺度在线免费看| 亚洲怡红院男人天堂| 母亲3免费完整高清在线观看 | 亚洲精品乱码久久久久久按摩| 91国产中文字幕| 哪个播放器可以免费观看大片| 久久久久久久久久人人人人人人| 少妇人妻久久综合中文| 交换朋友夫妻互换小说| 中文天堂在线官网| 91国产中文字幕| 精品国产一区二区久久| 又粗又硬又长又爽又黄的视频| 午夜av观看不卡| 久久久午夜欧美精品| 亚洲性久久影院| 精品人妻熟女毛片av久久网站| 性高湖久久久久久久久免费观看| 亚洲无线观看免费| av网站免费在线观看视频| 国模一区二区三区四区视频| 丝袜美足系列| 性色avwww在线观看| 丰满乱子伦码专区| 在线观看免费日韩欧美大片 | 男人添女人高潮全过程视频| 精品久久久精品久久久| 国国产精品蜜臀av免费| 成人二区视频| 美女福利国产在线| av福利片在线| 一个人看视频在线观看www免费| 国产亚洲午夜精品一区二区久久| 免费高清在线观看日韩| 欧美成人午夜免费资源| 国产精品三级大全| 日韩一本色道免费dvd| 少妇的逼水好多| 久久久国产欧美日韩av| 婷婷色综合大香蕉| 99久久综合免费| 飞空精品影院首页| 日本av免费视频播放| 国产片特级美女逼逼视频| 国产黄频视频在线观看| 欧美精品高潮呻吟av久久| 国产成人免费无遮挡视频| 视频区图区小说| 国产午夜精品一二区理论片| 欧美日韩视频高清一区二区三区二| 街头女战士在线观看网站| 高清黄色对白视频在线免费看| 男人操女人黄网站| 黑人欧美特级aaaaaa片| 99九九在线精品视频| 91在线精品国自产拍蜜月| 国产在线视频一区二区| 免费大片黄手机在线观看| 国产免费福利视频在线观看| 国产成人91sexporn| 色哟哟·www| 色视频在线一区二区三区| 亚洲综合精品二区| 亚洲人与动物交配视频| 一区二区三区四区激情视频| 国语对白做爰xxxⅹ性视频网站| 欧美bdsm另类| 国产一区二区在线观看日韩| 久久ye,这里只有精品| 日韩强制内射视频| 制服人妻中文乱码| 亚洲精品久久午夜乱码| 下体分泌物呈黄色| 国产亚洲av片在线观看秒播厂| 在线播放无遮挡| 女人久久www免费人成看片| 天天躁夜夜躁狠狠久久av| 日韩一本色道免费dvd| 国产免费一级a男人的天堂| 亚洲av日韩在线播放| 免费人妻精品一区二区三区视频| 在线观看三级黄色| 热re99久久国产66热| 欧美3d第一页| 国产色婷婷99| 久久精品国产亚洲av天美| 夜夜骑夜夜射夜夜干| 一边亲一边摸免费视频| 人人澡人人妻人| 成人影院久久| 人妻少妇偷人精品九色| 极品少妇高潮喷水抽搐| 女性生殖器流出的白浆| 蜜臀久久99精品久久宅男| 久久综合国产亚洲精品| 久久久久久久精品精品| 亚洲精品中文字幕在线视频| 国产不卡av网站在线观看| 欧美激情极品国产一区二区三区 | 精品亚洲乱码少妇综合久久| 亚洲中文av在线| 亚洲精品视频女| 九九久久精品国产亚洲av麻豆| 国产片内射在线| 性色avwww在线观看| 韩国高清视频一区二区三区| 亚洲国产精品国产精品| 日韩成人伦理影院| 97超碰精品成人国产| 熟女电影av网| 欧美日韩视频精品一区| 多毛熟女@视频| 久久久国产一区二区| 高清不卡的av网站| 国产精品蜜桃在线观看| 亚洲精品美女久久av网站| 永久免费av网站大全| 国产欧美另类精品又又久久亚洲欧美| 综合色丁香网| 黄色视频在线播放观看不卡| 新久久久久国产一级毛片| 欧美日韩av久久| 亚洲人与动物交配视频| 免费黄频网站在线观看国产| 国产日韩欧美在线精品| 国产熟女欧美一区二区| 国产午夜精品久久久久久一区二区三区| 校园人妻丝袜中文字幕| 国产高清三级在线| 男人操女人黄网站| 久久韩国三级中文字幕| 亚洲av不卡在线观看| 精品视频人人做人人爽| 国产免费现黄频在线看| 久久精品久久久久久噜噜老黄| 日韩强制内射视频| 亚洲精品国产av成人精品| 99热6这里只有精品| 久久精品国产鲁丝片午夜精品| 久热这里只有精品99| 伦理电影大哥的女人| 中文天堂在线官网| 久久久亚洲精品成人影院| 成人亚洲精品一区在线观看| 男女高潮啪啪啪动态图| 久久久久精品性色| 麻豆乱淫一区二区| 女性生殖器流出的白浆| 多毛熟女@视频| 最近的中文字幕免费完整| 高清视频免费观看一区二区| 国产高清三级在线| videossex国产| 亚洲欧美成人综合另类久久久| 精品99又大又爽又粗少妇毛片| 午夜免费鲁丝| 久久精品国产自在天天线| 成人毛片a级毛片在线播放| 一本一本久久a久久精品综合妖精 国产伦在线观看视频一区 | 亚洲天堂av无毛| 天天躁夜夜躁狠狠久久av| videosex国产| freevideosex欧美| 欧美另类一区| 一二三四中文在线观看免费高清| 久久99热这里只频精品6学生| 亚洲欧美一区二区三区国产| 少妇精品久久久久久久| 亚洲精品久久成人aⅴ小说 | 精品一区二区三区视频在线| 国产精品一区二区三区四区免费观看| 免费观看a级毛片全部| 国产精品女同一区二区软件| 美女视频免费永久观看网站| 免费看av在线观看网站| 亚洲av不卡在线观看| 赤兔流量卡办理| 精品国产露脸久久av麻豆| 国产精品成人在线| xxx大片免费视频| 黄片播放在线免费| 亚洲精品国产av蜜桃| 成人亚洲精品一区在线观看| 国产精品不卡视频一区二区| 亚洲精品,欧美精品| 国产一区二区在线观看日韩| 日韩 亚洲 欧美在线| 丝袜喷水一区| 热99久久久久精品小说推荐| 久久久久久久久久久久大奶| 久久精品人人爽人人爽视色| 最新中文字幕久久久久| 男男h啪啪无遮挡| 青春草亚洲视频在线观看| 久久国内精品自在自线图片| 国产淫语在线视频| 18+在线观看网站| 亚洲激情五月婷婷啪啪| 啦啦啦在线观看免费高清www| 国产亚洲精品久久久com| 在线 av 中文字幕| 国产高清三级在线| 在线精品无人区一区二区三| 高清午夜精品一区二区三区| 欧美日韩成人在线一区二区| 国产成人av激情在线播放 | 免费少妇av软件| 欧美三级亚洲精品| 18禁在线无遮挡免费观看视频| 熟妇人妻不卡中文字幕| 亚洲激情五月婷婷啪啪| 久久国产亚洲av麻豆专区| 日韩视频在线欧美| 免费高清在线观看视频在线观看| xxxhd国产人妻xxx| 成年人午夜在线观看视频| 999精品在线视频| 久久女婷五月综合色啪小说| 日本vs欧美在线观看视频| 日韩一区二区三区影片| 欧美日韩国产mv在线观看视频| 久久久久久久国产电影| 最近中文字幕2019免费版| 成人国产av品久久久| 丝瓜视频免费看黄片| 精品人妻在线不人妻| 日本与韩国留学比较| 黄色怎么调成土黄色| 水蜜桃什么品种好| 不卡视频在线观看欧美| 日日撸夜夜添| 亚洲精品国产av成人精品| 国产精品.久久久| 亚洲av男天堂| 亚洲欧美中文字幕日韩二区| 在线播放无遮挡| 最新中文字幕久久久久| 美女cb高潮喷水在线观看| 久久久久久久亚洲中文字幕| 美女大奶头黄色视频| 国产一区亚洲一区在线观看| 美女视频免费永久观看网站| 久久人妻熟女aⅴ| 免费观看性生交大片5| 特大巨黑吊av在线直播| 久久99一区二区三区| 欧美另类一区| 黄色视频在线播放观看不卡| 如何舔出高潮| 国产免费一级a男人的天堂| 九色成人免费人妻av| 精品少妇久久久久久888优播| 曰老女人黄片| 欧美一级a爱片免费观看看| 久久人妻熟女aⅴ| 亚洲精品乱久久久久久| 亚洲欧美一区二区三区国产| 黄色视频不卡| 黄色片一级片一级黄色片| 亚洲av片天天在线观看| 曰老女人黄片| 亚洲精品一二三| 成人黄色视频免费在线看| 精品一区二区三区av网在线观看 | 在线观看66精品国产| 飞空精品影院首页| 亚洲av美国av| 在线观看免费午夜福利视频| 精品国产国语对白av| 伊人久久大香线蕉亚洲五| 91成年电影在线观看| 久久九九热精品免费| 色婷婷av一区二区三区视频| 50天的宝宝边吃奶边哭怎么回事| 国产精品影院久久| 成年人免费黄色播放视频| 成人黄色视频免费在线看| 国精品久久久久久国模美| 黄色成人免费大全| 18禁美女被吸乳视频| 欧美乱码精品一区二区三区| 精品亚洲成a人片在线观看| tube8黄色片| 91精品三级在线观看| 香蕉国产在线看| 成年女人毛片免费观看观看9 | 99re在线观看精品视频| tube8黄色片| 国产av精品麻豆| 夜夜夜夜夜久久久久| av免费在线观看网站| 日韩精品免费视频一区二区三区| 亚洲成av片中文字幕在线观看| 午夜精品久久久久久毛片777| 国产精品 欧美亚洲| 黄色 视频免费看| 女人久久www免费人成看片| 无人区码免费观看不卡 | 黄频高清免费视频| 久久久久久亚洲精品国产蜜桃av| 亚洲精品av麻豆狂野| 久热爱精品视频在线9| 丁香六月天网| 国产精品免费一区二区三区在线 | 亚洲精品自拍成人| 黄色a级毛片大全视频| 1024香蕉在线观看| 一级,二级,三级黄色视频| 啦啦啦中文免费视频观看日本| 国产精品麻豆人妻色哟哟久久| 欧美亚洲 丝袜 人妻 在线| 国精品久久久久久国模美| 国产精品一区二区免费欧美| 久久久久久久大尺度免费视频| 亚洲第一青青草原| 无遮挡黄片免费观看| 妹子高潮喷水视频| 精品人妻熟女毛片av久久网站| 国产成人一区二区三区免费视频网站| 午夜日韩欧美国产| 国产又爽黄色视频| 桃红色精品国产亚洲av| 久久久久久久久免费视频了| 人人妻,人人澡人人爽秒播| 国产欧美亚洲国产| 亚洲色图 男人天堂 中文字幕| 两人在一起打扑克的视频| 午夜免费鲁丝| 亚洲少妇的诱惑av| 久久免费观看电影| 久久午夜综合久久蜜桃| 国产又爽黄色视频| 99精品久久久久人妻精品| 久久久久网色| 国产不卡av网站在线观看| 日韩欧美免费精品| 久久久精品国产亚洲av高清涩受| av免费在线观看网站| 久久精品人人爽人人爽视色| 天堂中文最新版在线下载| www.熟女人妻精品国产| 老司机在亚洲福利影院| 一二三四社区在线视频社区8| 精品国产一区二区三区四区第35| svipshipincom国产片| 另类精品久久| 9191精品国产免费久久| 91成年电影在线观看| 久久久国产一区二区| 天堂俺去俺来也www色官网| 亚洲av日韩精品久久久久久密| 中文欧美无线码| 中文字幕精品免费在线观看视频| 免费女性裸体啪啪无遮挡网站| 免费在线观看日本一区| 国产三级黄色录像| 日韩人妻精品一区2区三区| 国产精品 欧美亚洲| 国产精品99久久99久久久不卡| 天天影视国产精品| 夜夜爽天天搞| 一级黄色大片毛片| 国产一区二区三区在线臀色熟女 | h视频一区二区三区| 黄片大片在线免费观看| 国产日韩欧美视频二区| 国产成人精品无人区| 天天添夜夜摸| 亚洲欧洲日产国产| av天堂在线播放| a在线观看视频网站| 亚洲国产中文字幕在线视频| 日本黄色视频三级网站网址 | 激情视频va一区二区三区| 久久久国产精品麻豆| 后天国语完整版免费观看| 在线十欧美十亚洲十日本专区| 一二三四社区在线视频社区8| 国产熟女午夜一区二区三区| 在线观看免费视频网站a站| 午夜福利在线观看吧| 黄色毛片三级朝国网站| 精品少妇内射三级| 天天躁狠狠躁夜夜躁狠狠躁| 国产精品久久久久久人妻精品电影 | 久久久久久人人人人人| 日韩视频一区二区在线观看| 高清在线国产一区| av线在线观看网站| 亚洲av欧美aⅴ国产| 国产av国产精品国产| 国产xxxxx性猛交| 人人妻人人澡人人看| 老熟妇乱子伦视频在线观看| 免费黄频网站在线观看国产| 久久精品国产99精品国产亚洲性色 | 在线观看免费午夜福利视频| 成人精品一区二区免费| 久久精品aⅴ一区二区三区四区| 制服诱惑二区| 无限看片的www在线观看| 黑人巨大精品欧美一区二区mp4| 国产91精品成人一区二区三区 | 久久人妻熟女aⅴ| 国产高清国产精品国产三级| 丁香六月天网| 99精国产麻豆久久婷婷| 三级毛片av免费| 免费在线观看视频国产中文字幕亚洲| av线在线观看网站| cao死你这个sao货| 老司机福利观看| 三上悠亚av全集在线观看| 久久亚洲真实| 国产亚洲av高清不卡| 两性夫妻黄色片| av不卡在线播放| 1024视频免费在线观看| 美女国产高潮福利片在线看| 成人免费观看视频高清| 色尼玛亚洲综合影院| 日韩成人在线观看一区二区三区| 中文字幕人妻熟女乱码| 精品一区二区三区四区五区乱码| 大片电影免费在线观看免费| 中文亚洲av片在线观看爽 | 丰满人妻熟妇乱又伦精品不卡| 黄色视频,在线免费观看| 日本a在线网址| 国产免费福利视频在线观看| 中文字幕色久视频| 91九色精品人成在线观看| 97在线人人人人妻| 亚洲一卡2卡3卡4卡5卡精品中文| 欧美激情高清一区二区三区| 国产av精品麻豆| tocl精华| 天堂8中文在线网| 精品国产国语对白av| 男人舔女人的私密视频| 精品久久久久久久毛片微露脸| 国产精品美女特级片免费视频播放器 | 妹子高潮喷水视频| videosex国产| 51午夜福利影视在线观看| 欧美成人免费av一区二区三区 | 精品国产乱码久久久久久男人| 人人澡人人妻人| 亚洲第一av免费看| 久久九九热精品免费| 国产精品熟女久久久久浪| 18禁美女被吸乳视频| 日日爽夜夜爽网站| 一区二区日韩欧美中文字幕| 免费人妻精品一区二区三区视频| 欧美国产精品一级二级三级| 成人国产一区最新在线观看| 精品熟女少妇八av免费久了| 一区二区三区乱码不卡18| 嫩草影视91久久| 亚洲一卡2卡3卡4卡5卡精品中文| 亚洲国产成人一精品久久久| 国产男女超爽视频在线观看| 国产免费视频播放在线视频| 日韩三级视频一区二区三区| 亚洲欧美日韩高清在线视频 | 丰满人妻熟妇乱又伦精品不卡| 欧美日韩福利视频一区二区| 国产精品偷伦视频观看了| 久久国产精品男人的天堂亚洲| 夜夜爽天天搞| 女警被强在线播放| 如日韩欧美国产精品一区二区三区| av超薄肉色丝袜交足视频| 久久久久视频综合| 一本综合久久免费| 在线观看免费高清a一片| 欧美日韩亚洲高清精品| 精品乱码久久久久久99久播| 亚洲国产欧美一区二区综合| www.精华液| 97人妻天天添夜夜摸| kizo精华| 国产极品粉嫩免费观看在线|