• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Design of three-dimensional imaging lidar optical system for large field of view scanning

    2022-08-01 05:58:56QingYanLi李青巖YuZhang張雨ShiYuYan閆詩雨BinZhang張斌andChunHuiWang王春暉
    Chinese Physics B 2022年7期
    關鍵詞:青巖張雨張斌

    Qing-Yan Li(李青巖), Yu Zhang(張雨), Shi-Yu Yan(閆詩雨),Bin Zhang(張斌), and Chun-Hui Wang(王春暉),?

    1National Key Laboratory of Tunable Laser Technology,Harbin Institute of Technology,Harbin 150001,China

    2Geling Institute of Artificial Intelligence and Robotics,Shenzhen 518063,China

    Keywords: 3D lidar,MEMS scanning system,large field of view scanning,Zemax

    1. Introduction

    With the rapid development of artificial intelligence, internet,automation and sensors,three-dimensional(3D)imaging laser radar has been widely used in many fields, such as topographic mapping,[1]atmospheric detection,[2,3]environmental sensing,[4,5]target detection[6]and automatic driving,[7]due to its high measurement accuracy, good directionality, fast speed and less affected from the ground clutter.[8,9]At present, the mainstream 3D imaging lidar solutions include mechanical rotary lidar, micro-electromechanical system(MEMS)scanning lidar,optical phased array(OPA)and flash lidar. The mechanical rotary laser 3D image sensor[10,11]was developed earliest and is the most mature technology. However, due to the limitation of the technical system, it is bulky and needs to be installed externally on the roof. In addition,its cost has become the main constraint.

    Compared with the mechanical lidar, solid-state lidar eliminates the mechanical structure of complex highfrequency rotation,greatly improves durability,and greatly reduces the volume. Pure solid-state lidar mainly includes OPA and flash lidar.Flash lidar[12,13]emits a large area of laser light to cover the detection area directly in a short period of time,and the image of the surrounding environment can be drawn through a highly sensitive receiver.Flash lidar has no scanning device,fast imaging speed,high integration,small size,chiplevel technology,suitable for mass production,and can further reduce costs and ensure the service life of the device. However,the flash lidar requires a high-power laser source,which can be dangerous to humans and animals. In addition,the detection distance is close, which is the crucial factor restricting its development. OPA scanning technology is an entirely solid-state technology. OPA lidar[14,15]uses pure solid-state devices without any mechanical removable structures and performs better in terms of durability.However,OPA lidar is easy to form side lobes,which damages the beam range and angular resolution, and requires the size of the array unit to be no more than half a wavelength. The requirements for materials and processes are extremely demanding, so the cost is correspondingly high.

    MEMS lidar[16,17]is a compromise between the mechanical and solid-state lidar, and it still has mechanical rotating parts. MEMS micromirrors have the characteristics of small size, light weight, fast scanning speed, low power consumption, relatively low price, and insensitivity to environmental impact. This makes it possible for lidar to achieve miniaturization, high frame rate, high accuracy and high precision measurement. Therefore, the MEMS scanning micromirror has become one of the extremely important components in the optical scanning system. Compared with other schemes,MEMS lidar integrates many advantages of other schemes.The future technological development must be towards solidstate and miniaturization, but because the current solid-state solution is not yet mature and the hardware cost is relatively high,it cannot be commercialized on a large scale. The hybrid solid-state lidar has better performance than the mechanical type, and the technology is more mature than the solid-state lidar. Therefore, it is the currently most feasible solution for large-scale practical applications. While the MEMS lidar is commercially available on a large scale,the technical solution must overcome the shortcomings of the small scanning angle of the MEMS scanning mirror.[18]

    In order to solve the shortcomings of the MEMS micromirrors,some solutions have been proposed. For example,Cristiano Niclasset al.[19]proposed to use three laser diodes to form a linear array that could converge the outgoing laser beam through a large positive lens to the MEMS mirror, ultimately achieving the expansion of the scanning field of view.But this method requires multiple lasers. Other researchers have also proposed a method of realizing the expansion of angle by using positive and negative lens groups.[20]With a positive lens and a negative lens placed in the front and back of the MEMS micromirror, respectively, a Galileo telescope is formed, which can increase the scanning field of view effectively.Although such a structure is simple and can help expand the field of view, the beam divergence angle is also enlarged,which would make the target spot very large and weak the echo signals when performing long-distance detections. Besides,the range of angle expansion is not enough.This method is only suitable for systems with excellent beam collimation.Another method is to use a fisheye lens[21]or a wide-angle lens,[22]but the imaging surface is distorted severely.

    In order to overcome these shortcomings and realize the field of view expansion and collimation of beam scanning,a new MEMS micromirror folding scanning emission optical system design is proposed. This article aims to design a scanning emission system with a scanning field of view greater than 40°,a divergence angle of less than 2 mrad,and a spot diameter of less than 40 cm at a detection distance of 100 m.The MEMS micromirror used in this system is the model S4342 product from American Mirrorcle company. Its mechanical rotation angle is±5°. Through the theoretical derivation of the relationship among the probe beam divergence angles,the scanning field of view and the parameters of the optical system components, the structure and parameters of the system are determined,and the compensation lens group is introduced to achieve the final parallel beam scanning. The system is designed and optimized by Zemax software. The final design results show that the designed system scan field reaches 53°×53°. The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm.The maximum radius of the spot at 100 m is 19 cm,and the diffusion angle is less than 2 mrad.

    2. The theoretical basis and model of the system

    2.1. Pulsed lidar system and its operating principle

    The laser 3D image sensor system is mainly composed of three parts: a transmitting system, a receiving system,and a signal processing system.[23–25]The transmitting system consists of a pulsed fiber laser,a scanning optical system,and an excellent MEMS scanning mirror. The receiving system includes a large field-of-view focusing lens and a highspeed photodetector time interval measurement system(timeto-digital converter TDC). The signal processing system sets the relevant parameters,sends out the synchronization signal,processes the 3D data points set,and then transmits the image to the display. Figure 1 shows the schematic diagram of the lidar system.

    Fig.1. The schematic diagram of the lidar system.

    In a lidar system,the laser source is very important. The laser beam emitted by the system must be stable, and the divergence angle must be controlled within a certain range. A 1550 nm wavelength optical fiber laser is used as the transmitting module and the output laser repetition frequency can be adjusted.Here it is temporarily set to be 250 kHz and the pulse width is 4 ns. The mechanical rotation angle of the MEMS scanning mirror is±5°,and the effective reflection surface diameter is 2000 μm. The laser beam is detected by using the beam quality analyzer PY-III-CA of Ophir-Spiricon Inc. As shown in Fig.2,the beam quality of the laser is good,the output spot diameter is 3 mm,and there is a divergence angle of 5 mrad.

    Fig.2. Tested laser beam quality.

    2.2. Theoretical derivation

    In 3D imaging lidar systems, both the beam divergence angle and the scanning field of view are very important performance parameters. A well-performing system must have both a large scan range and a relatively small beam divergence angle. The divergence angle has a great influence on the performance of the system. Even if there are only a few mrad divergence angles, after the beam is emitted for several kilometers,the diameter of the spot will become several meters or even ten meters, resulting in pretty weak spot energy on the target. Thus, the detector could not receive it. This increases the difficulty of signal reception. However,the divergence angle of the beam should not be too small. If the beam is too small,it will cause insufficient sampling of the target and may miss key information.Therefore,the angular resolution is paid large attention in the designing of the lidar transmitting optical system to achieve a suitable laser beam divergence angle.

    As shown in Fig. 3, in the scanning laser scanning 3D imaging sensor, the scanning mirror will form a spatial beam lattice in a certain scanning space according to the scanning drive signal. For laser beams with different divergence angles,the spot size of the dot matrix formed in the space of a given detection distance is different,so the sampling rate of the light spot array to the scanning space is also different. If the spot on the target is too small,it may result in under-sampling. If the divergence angle of the beam is relatively large,the spots may overlap, and the energy of the beam diverges severely, making the detector unable to receive. Therefore, in the design,the divergence angle of the laser beam should be less than the angular resolution of the system, but not less than half of the system resolution to ensure the sampling rate.

    Fig. 3. The schematic diagram of spatial sampling rate of laser beam scanning.

    According to the scanning optical system,when the scanning angle is 50°,n=m=512 (that is, 512×512 scanning points per frame), the resolution of the system is 0.1°, which is 1.77 mrad. Therefore,the divergence angle of the Gaussian beam emitted by the designed system is 2 mrad,which ensures that the spatial sampling of the system is greater than 50%and also avoids the overlap of the beam on the target surface.

    Fig.4. The overall design of the optical system for large field of view scanning of 3D imaging lidar.

    The overall design of the optical system for the large field of view scanning of 3D imaging lidar used in this paper is shown in Fig. 4. The system consists of two focusing lenses(L1, L3)and a compensating lens(L2). After pre-expansion,the size of the spot is larger than the effective surface size of the MEMS mirror. In order to focus the laser beams on the effective surface of the MEMS mirror,the beams are focused by the first focusing lens. The center position of the MEMS mirror isA, and the MEMS scanning mirror is controlled by the driving circuit and swings around the center positionAto realize the two-dimensional scanning. After the ref lection of the MEMS mirror, the beam convergence point constitutes a scanning spherical surface,withAas the center of the sphere andRas the radius. If the collimating lens group is placed behind the spherical surface at this time,the requirement of lens aperture will be relatively large,and the aberration correction is quite difficult. Therefore,the L2 is introduced here to transform the formed curved surface into a plane, and the parallel beam is emitted through L3.

    Fig.5.Relationship between scanning angle of MEMS mirror with field of view.

    The relationship between the scanning angle of the MEMS scanning mirror with the angle of view can be obtained,as shown in Fig.5. The relationship between the scan angle of MEMS mirror,θ1, and its mechanical rotation angleθis

    with

    The relationship between the scanning field angleθ2and the scanning angle of the MEMS mirrorθ1can be obtained by solving Eq.(2),and it can be expressed as

    Then the magnificationTof the scan angle can be obtained as

    3. Zemax design and performance analysis

    According to the theoretical analysis in the previous section, we can get the parameters of each lens as shown in Table 1.

    Table 1. Focal length parameters of the designed lenses.

    According to the lens parameters in Table 1,three sets of double cemented lenses are selected to obtain the initial structure. In order to compress the beam divergence angle,the introduction of the aspherical coefficient of L3 is optimized,and the final optimization structure is shown in Fig.6.

    Fig.6. Optimized optical design.

    Table 2 shows the data of the final structure. The whole system consists of four parts:focusing lens(L1),MEMS scanning mirror, compensation lens (L2), and exit lens (L3). L1 focuses on the beam so that the beam focuses completely on the MEMS scanning mirror,the light reflected by the MEMS mirror is compensated by L2,the chief ray of the outgoing ray is parallel to the optical axis, and all convergence points of the light are in the same plane. The concentrated light of the equivalent focal plane passes through L3 to achieve parallel light exit,which achieves a wide-range scanning field of view.The maximum angle is 26.5°.

    Table 2. Optical parameters of lenses.

    Figure 7 is the spot diagram of the system. The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm and the spot distribution is uniform.The maximum radius of the spot at 100 m is 19 cm,and the diffusion angle is less than 2 mrad. Figure 8 is the geometric encircled energy diagram of an outgoing light spot. Since the outgoing beam is a diffuse spot,and the energy at the centroid of the spot is the strongest, the geometrically encircled energy diagram reflects the energy concentration of the optical system. It can be seen from the figure that 90%of the spot energy is concentrated at the center of mass. The system energy is centrally optimized. Figure 9 is the wavefront diagram of the central light path. The figure shows that the RMS wavefront difference of the outgoing beam is 0.1925 waves,which is less than a quarter wavelength. The outgoing beam spot quality is good.

    Fig. 7. The point diagrams of exiting spots in different scanning fields, where the two lines from the upper left to lower right are the cases corresponding to the θ being-4°,-3°,-2°,-1°,0°,1°,2°,3°,and 4°,respectively. (a)The spot diagram at a distance of 100 mm from the exit surface. (b)The spot diagram at a distance of 100 m from the exit surface.

    Fig.8. The geometric encircled energy diagram.

    Fig.9. The wavefront map.

    4. Tolerance analysis

    When designing an optical system,it is necessary to consider not only the design index requirements,but also whether the designed lens meets the processing conditions.[26–29]If the system exceeds the processing level, the final result is much different from the design expectation in the later assembly and testing. Therefore,it is necessary to perform tolerance analysis on the system.

    Table 3. Set of tolerances used for Monte Carlo simulation.

    Zemax optical design software is used to analyze the tolerance of the designed system. The average value of RMS wavefront is used as the evaluation function standard. The standard value is 0.1925 waves. The set of tolerances are shown in Table 3, and Monte Carlo analysis runs 200 times to obtain the sensitivity data of the optical system. It can be seen from Table 4 that after 200 Monte Carlo simulation experiments,more than 80%of the Monte Carlo samples are greater than 0.1925 waves. The tolerance range given is a relatively loose value. It can be seen that the tolerance of the design is better,and the qualification rate of the lens can be guaranteed in the production process,and the material cost and labor cost are reduced.

    Table 4. Result of Monte Carlo analysis.

    5. Conclusion

    This paper presents a folded large field of view scanning optical system. Through the theoretical derivation of ray tracing,the structure and parameters of the system are determined.After design and optimization with the Zemax software, the final structure gets good beam collimation and beam expansion performance. The results show that the scanning angle can range from±5 to±26.5°. The scanning field of view is expanded by 5.3 times. The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm and the spot distribution is uniform.The maximum radius of the spot at 100 m is 19 cm, and the diffusion angle is less than 2 mrad. The energy concentration in the spot range is greater than 90%,the system energy concentration is high, and the parallelism is good. The system overcomes the shortcoming of the small scanning mechanical angle of the MEMS lidar.What is more,it has a compact structure, requires fewer lenses, and is more convenient to adjust.This is very beneficial for the miniaturization of 3D imaging lidar. It has broad application prospects in the field of laser beam collimation and beam expansion.

    Acknowledgements

    Project supported by the Shenzhen Fundamental Research Program(Grant No.JCYJ2020109150808037),the National Key Scientific Instrument and Equipment Development Projects of China(Grant No.62027823),and the National Natural Science Foundation of China(Grant No.61775048).

    猜你喜歡
    青巖張雨張斌
    夕陽家園
    金秋(2022年10期)2022-11-25 16:28:12
    賞梅時節(jié)品詠梅詩聯
    晚晴(2021年3期)2021-05-17 13:12:03
    一路有你都是歌
    當代音樂(2021年2期)2021-03-18 09:39:08
    Dynamic measurement of beam divergence angle of different fields of view of scanning lidar?
    《花之戀》
    Monolithic all- fiber mid-infrared supercontinuum source based on a step-index two-mode As2S3 fiber?
    青巖古鎮(zhèn)
    美麗從不是全部 張雨綺
    電影故事(2015年16期)2015-07-14 02:22:26
    Comparative study of MPS method and level-set method for sloshing flows*
    色哟哟哟哟哟哟| 亚洲自拍偷在线| 一进一出抽搐动态| 极品人妻少妇av视频| 日本wwww免费看| 18禁黄网站禁片午夜丰满| 一级作爱视频免费观看| 久久香蕉激情| 久久这里只有精品19| 十分钟在线观看高清视频www| 十分钟在线观看高清视频www| 免费久久久久久久精品成人欧美视频| 国产精品 欧美亚洲| 我的亚洲天堂| 香蕉久久夜色| 99国产精品一区二区三区| 亚洲av五月六月丁香网| 亚洲成人免费电影在线观看| 精品乱码久久久久久99久播| 日韩人妻精品一区2区三区| 91麻豆av在线| 欧美日韩瑟瑟在线播放| 婷婷六月久久综合丁香| 狠狠狠狠99中文字幕| 两性夫妻黄色片| 99re在线观看精品视频| 国产一区二区在线av高清观看| 又大又爽又粗| 久久精品国产99精品国产亚洲性色 | 99久久99久久久精品蜜桃| 欧美精品亚洲一区二区| 伊人久久大香线蕉亚洲五| 午夜福利欧美成人| 日韩欧美一区二区三区在线观看| 视频在线观看一区二区三区| 黄片播放在线免费| ponron亚洲| 久久精品影院6| 如日韩欧美国产精品一区二区三区| 国产av一区在线观看免费| 97人妻天天添夜夜摸| 国产又爽黄色视频| 性色av乱码一区二区三区2| e午夜精品久久久久久久| 亚洲av成人一区二区三| 色在线成人网| 久久久久久久精品吃奶| 国产av一区在线观看免费| 亚洲专区国产一区二区| 另类亚洲欧美激情| 国产精品久久久久久人妻精品电影| 很黄的视频免费| 国产精品野战在线观看 | 亚洲人成电影观看| 黄色怎么调成土黄色| 在线观看www视频免费| 亚洲第一青青草原| 后天国语完整版免费观看| 精品久久久久久久久久免费视频 | 亚洲黑人精品在线| 91大片在线观看| 亚洲欧美日韩另类电影网站| 深夜精品福利| 99热国产这里只有精品6| 亚洲精品av麻豆狂野| 99久久久亚洲精品蜜臀av| 天堂√8在线中文| 久久久国产成人免费| 精品国内亚洲2022精品成人| www.自偷自拍.com| 亚洲av第一区精品v没综合| 色综合欧美亚洲国产小说| 久久精品亚洲熟妇少妇任你| 黄色女人牲交| 麻豆国产av国片精品| 脱女人内裤的视频| 色在线成人网| 18美女黄网站色大片免费观看| 国产av一区在线观看免费| 国产亚洲精品久久久久久毛片| 他把我摸到了高潮在线观看| 国产熟女午夜一区二区三区| 美国免费a级毛片| 美女大奶头视频| 日日干狠狠操夜夜爽| 亚洲免费av在线视频| 午夜福利影视在线免费观看| 成人av一区二区三区在线看| av中文乱码字幕在线| 女人高潮潮喷娇喘18禁视频| av欧美777| 亚洲熟妇熟女久久| 亚洲国产精品一区二区三区在线| 精品熟女少妇八av免费久了| 亚洲专区字幕在线| 久久精品国产亚洲av香蕉五月| 亚洲国产欧美一区二区综合| 人人妻人人添人人爽欧美一区卜| 午夜免费成人在线视频| 啪啪无遮挡十八禁网站| 伦理电影免费视频| 国产欧美日韩一区二区三区在线| 免费女性裸体啪啪无遮挡网站| 婷婷丁香在线五月| 亚洲中文字幕日韩| 午夜福利在线免费观看网站| 高清av免费在线| 国产精品99久久99久久久不卡| 国产91精品成人一区二区三区| 久久午夜亚洲精品久久| 亚洲中文日韩欧美视频| 精品一区二区三卡| 18美女黄网站色大片免费观看| 久久国产精品人妻蜜桃| 婷婷精品国产亚洲av在线| 久久中文字幕一级| 成人18禁高潮啪啪吃奶动态图| 丝袜在线中文字幕| 露出奶头的视频| 久久久久久亚洲精品国产蜜桃av| 亚洲欧美激情在线| 国产成人精品在线电影| 夫妻午夜视频| 动漫黄色视频在线观看| 久久中文字幕人妻熟女| 久久影院123| 亚洲一区二区三区色噜噜 | 法律面前人人平等表现在哪些方面| 亚洲欧美日韩另类电影网站| 国产成人精品在线电影| 国产av一区在线观看免费| 国产99白浆流出| 国产一区二区激情短视频| 啦啦啦在线免费观看视频4| 18禁观看日本| 18禁美女被吸乳视频| 国产精品 欧美亚洲| 妹子高潮喷水视频| 99精国产麻豆久久婷婷| 亚洲欧洲精品一区二区精品久久久| 在线观看www视频免费| 女性生殖器流出的白浆| 久久精品国产99精品国产亚洲性色 | 91精品国产国语对白视频| 涩涩av久久男人的天堂| 18禁裸乳无遮挡免费网站照片 | 久久精品成人免费网站| 黑人猛操日本美女一级片| 曰老女人黄片| 日本 av在线| 最近最新中文字幕大全免费视频| 真人一进一出gif抽搐免费| 国产激情久久老熟女| 欧美日韩国产mv在线观看视频| 亚洲精品在线美女| 美女午夜性视频免费| 露出奶头的视频| 麻豆国产av国片精品| 中文字幕最新亚洲高清| 两性午夜刺激爽爽歪歪视频在线观看 | 国产成人欧美| 精品国产美女av久久久久小说| 亚洲七黄色美女视频| e午夜精品久久久久久久| 国产精品1区2区在线观看.| 亚洲av成人av| 国产激情久久老熟女| 久久婷婷成人综合色麻豆| av在线天堂中文字幕 | 亚洲成人精品中文字幕电影 | 欧美 亚洲 国产 日韩一| 久久精品国产亚洲av香蕉五月| 久久香蕉激情| 又黄又爽又免费观看的视频| 亚洲成av片中文字幕在线观看| 男人的好看免费观看在线视频 | 91成年电影在线观看| 国产av又大| 午夜免费鲁丝| 97人妻天天添夜夜摸| 国产av一区二区精品久久| 亚洲国产精品一区二区三区在线| 国产成人啪精品午夜网站| 国产精品99久久99久久久不卡| 两个人免费观看高清视频| av超薄肉色丝袜交足视频| 国产高清videossex| 在线十欧美十亚洲十日本专区| av中文乱码字幕在线| 国产欧美日韩一区二区三| 精品国产乱码久久久久久男人| 午夜精品久久久久久毛片777| 久久久久精品国产欧美久久久| 日韩国内少妇激情av| 亚洲国产精品999在线| 99国产综合亚洲精品| 中文字幕人妻熟女乱码| 午夜免费鲁丝| 久久精品91蜜桃| 丰满的人妻完整版| 亚洲aⅴ乱码一区二区在线播放 | 免费一级毛片在线播放高清视频 | 亚洲精品国产精品久久久不卡| www国产在线视频色| 国产99白浆流出| 51午夜福利影视在线观看| 人人妻人人添人人爽欧美一区卜| 日韩欧美一区视频在线观看| 国产成人av教育| 欧美日韩av久久| 亚洲中文av在线| 久久伊人香网站| 波多野结衣高清无吗| cao死你这个sao货| 真人做人爱边吃奶动态| 另类亚洲欧美激情| 久久亚洲真实| 精品久久久久久久久久免费视频 | 免费人成视频x8x8入口观看| 9色porny在线观看| 日韩精品免费视频一区二区三区| 视频区图区小说| 变态另类成人亚洲欧美熟女 | 亚洲人成伊人成综合网2020| 欧美日韩黄片免| 中文字幕另类日韩欧美亚洲嫩草| 中文字幕av电影在线播放| 搡老岳熟女国产| 99精品久久久久人妻精品| 亚洲午夜精品一区,二区,三区| 精品国产美女av久久久久小说| 在线观看午夜福利视频| 99久久国产精品久久久| 制服人妻中文乱码| 日韩国内少妇激情av| 日韩精品青青久久久久久| 亚洲国产欧美一区二区综合| 老司机深夜福利视频在线观看| 人人妻人人爽人人添夜夜欢视频| 午夜成年电影在线免费观看| 色在线成人网| 国产麻豆69| 一区二区三区激情视频| 中亚洲国语对白在线视频| 美女福利国产在线| 国产免费av片在线观看野外av| 无人区码免费观看不卡| 亚洲欧美激情在线| 最近最新免费中文字幕在线| 中文字幕精品免费在线观看视频| 女性生殖器流出的白浆| 日韩大尺度精品在线看网址 | 亚洲七黄色美女视频| 一级毛片女人18水好多| 1024香蕉在线观看| 成熟少妇高潮喷水视频| 精品人妻1区二区| 国产色视频综合| 美女国产高潮福利片在线看| 叶爱在线成人免费视频播放| 超碰成人久久| 夜夜看夜夜爽夜夜摸 | 91国产中文字幕| 最新美女视频免费是黄的| 国产一区二区三区视频了| 淫秽高清视频在线观看| 可以免费在线观看a视频的电影网站| 日韩免费高清中文字幕av| 国产精品香港三级国产av潘金莲| 国产精品久久久久久人妻精品电影| 黑人猛操日本美女一级片| 美女国产高潮福利片在线看| av在线播放免费不卡| 久久精品国产亚洲av高清一级| 欧美成人免费av一区二区三区| 免费日韩欧美在线观看| 国产又爽黄色视频| 男女下面插进去视频免费观看| 熟女少妇亚洲综合色aaa.| 精品福利观看| 亚洲精品久久成人aⅴ小说| av超薄肉色丝袜交足视频| 天堂影院成人在线观看| 亚洲精品中文字幕在线视频| 久久中文字幕人妻熟女| 亚洲中文日韩欧美视频| 深夜精品福利| 最新美女视频免费是黄的| 精品一区二区三卡| 成年女人毛片免费观看观看9| 好男人电影高清在线观看| 两性夫妻黄色片| 一级a爱视频在线免费观看| 国内毛片毛片毛片毛片毛片| 精品卡一卡二卡四卡免费| 男女床上黄色一级片免费看| 9色porny在线观看| 午夜福利,免费看| 午夜久久久在线观看| 国产三级在线视频| x7x7x7水蜜桃| 黑人巨大精品欧美一区二区蜜桃| 视频区图区小说| 身体一侧抽搐| 男人操女人黄网站| 麻豆久久精品国产亚洲av | 麻豆久久精品国产亚洲av | 日韩精品青青久久久久久| 国产av又大| 国产视频一区二区在线看| 亚洲黑人精品在线| 亚洲色图av天堂| 久久人妻熟女aⅴ| 91在线观看av| 国产精品日韩av在线免费观看 | 午夜视频精品福利| 欧美色视频一区免费| 一边摸一边做爽爽视频免费| 这个男人来自地球电影免费观看| 变态另类成人亚洲欧美熟女 | 国内久久婷婷六月综合欲色啪| 天天躁狠狠躁夜夜躁狠狠躁| 十分钟在线观看高清视频www| 嫩草影视91久久| 国产欧美日韩一区二区精品| 久久婷婷成人综合色麻豆| 大香蕉久久成人网| 成人特级黄色片久久久久久久| 母亲3免费完整高清在线观看| 无限看片的www在线观看| 黑丝袜美女国产一区| 可以在线观看毛片的网站| 在线免费观看的www视频| 夫妻午夜视频| 欧美午夜高清在线| av天堂久久9| 国产主播在线观看一区二区| 国产成人啪精品午夜网站| 国产真人三级小视频在线观看| 操美女的视频在线观看| 国产男靠女视频免费网站| 久久久精品国产亚洲av高清涩受| 午夜免费成人在线视频| 最新在线观看一区二区三区| 亚洲自拍偷在线| 两人在一起打扑克的视频| 波多野结衣高清无吗| 黄色片一级片一级黄色片| 老熟妇仑乱视频hdxx| 久久午夜亚洲精品久久| 国产高清视频在线播放一区| 18禁黄网站禁片午夜丰满| 老熟妇仑乱视频hdxx| 一区在线观看完整版| 999精品在线视频| 大香蕉久久成人网| 久久婷婷成人综合色麻豆| 后天国语完整版免费观看| 国产无遮挡羞羞视频在线观看| 99riav亚洲国产免费| av免费在线观看网站| 亚洲精华国产精华精| 水蜜桃什么品种好| 久久久久国内视频| 动漫黄色视频在线观看| 别揉我奶头~嗯~啊~动态视频| 国产无遮挡羞羞视频在线观看| 两性夫妻黄色片| 国产99白浆流出| 午夜精品在线福利| 欧美日韩亚洲高清精品| 日本一区二区免费在线视频| av中文乱码字幕在线| 亚洲免费av在线视频| 村上凉子中文字幕在线| 老司机福利观看| 国产不卡一卡二| 久久久久国产一级毛片高清牌| 美女大奶头视频| 99久久综合精品五月天人人| 一级a爱片免费观看的视频| 久久久国产成人精品二区 | 天堂影院成人在线观看| 国产精品二区激情视频| 国产成人免费无遮挡视频| 黄色视频不卡| 91在线观看av| 亚洲av第一区精品v没综合| 女性被躁到高潮视频| 高清黄色对白视频在线免费看| 曰老女人黄片| 高清毛片免费观看视频网站 | 一级片免费观看大全| 老司机在亚洲福利影院| 在线观看午夜福利视频| 999精品在线视频| 在线观看日韩欧美| 亚洲伊人色综图| aaaaa片日本免费| 国产野战对白在线观看| 美女扒开内裤让男人捅视频| 亚洲第一青青草原| 日日摸夜夜添夜夜添小说| av有码第一页| 成人永久免费在线观看视频| 交换朋友夫妻互换小说| 亚洲熟女毛片儿| 成人手机av| 午夜视频精品福利| 夜夜夜夜夜久久久久| 在线视频色国产色| 亚洲精品国产一区二区精华液| 国产av一区二区精品久久| 久久午夜综合久久蜜桃| 亚洲精品国产精品久久久不卡| 在线国产一区二区在线| 天堂中文最新版在线下载| 日韩精品中文字幕看吧| 嫁个100分男人电影在线观看| 亚洲精品国产区一区二| 精品一区二区三区四区五区乱码| 国产在线观看jvid| 亚洲欧洲精品一区二区精品久久久| 亚洲,欧美精品.| 亚洲色图综合在线观看| 亚洲狠狠婷婷综合久久图片| www日本在线高清视频| 日韩人妻精品一区2区三区| 日韩中文字幕欧美一区二区| 在线观看日韩欧美| 亚洲成人精品中文字幕电影 | 国产野战对白在线观看| 法律面前人人平等表现在哪些方面| 亚洲视频免费观看视频| 精品国内亚洲2022精品成人| 亚洲九九香蕉| 一二三四在线观看免费中文在| 又大又爽又粗| 天天躁夜夜躁狠狠躁躁| 欧美一级毛片孕妇| 一区二区日韩欧美中文字幕| 黄色怎么调成土黄色| 91成年电影在线观看| 免费在线观看视频国产中文字幕亚洲| 我的亚洲天堂| 91成年电影在线观看| 一本大道久久a久久精品| 精品福利永久在线观看| 制服人妻中文乱码| 免费在线观看完整版高清| 脱女人内裤的视频| 免费观看人在逋| 手机成人av网站| 午夜免费激情av| 久久久久久人人人人人| 久久草成人影院| 丰满的人妻完整版| 免费一级毛片在线播放高清视频 | 国产97色在线日韩免费| 国产高清激情床上av| 制服人妻中文乱码| 国产成人精品在线电影| 欧美日韩av久久| 欧美成狂野欧美在线观看| 黑人巨大精品欧美一区二区蜜桃| 久久久国产一区二区| 欧美黄色片欧美黄色片| 亚洲国产欧美网| 69av精品久久久久久| 欧美成人午夜精品| 国产欧美日韩综合在线一区二区| 国产精品久久久av美女十八| 丰满迷人的少妇在线观看| 久久精品人人爽人人爽视色| 曰老女人黄片| 亚洲一卡2卡3卡4卡5卡精品中文| 天天躁狠狠躁夜夜躁狠狠躁| 成人18禁高潮啪啪吃奶动态图| 女性生殖器流出的白浆| 一边摸一边抽搐一进一出视频| 国产精品成人在线| 亚洲伊人色综图| 国产亚洲欧美精品永久| 深夜精品福利| 欧美乱色亚洲激情| 中国美女看黄片| 国产高清视频在线播放一区| 婷婷丁香在线五月| 亚洲久久久国产精品| 精品久久久精品久久久| 色精品久久人妻99蜜桃| 久久人人97超碰香蕉20202| 可以免费在线观看a视频的电影网站| 久久精品国产清高在天天线| 男男h啪啪无遮挡| 亚洲av第一区精品v没综合| 亚洲中文字幕日韩| 性少妇av在线| 久久天堂一区二区三区四区| 热re99久久国产66热| 啪啪无遮挡十八禁网站| 国产欧美日韩一区二区三区在线| av网站在线播放免费| 99精品欧美一区二区三区四区| 久久久久久久久中文| av网站免费在线观看视频| 色哟哟哟哟哟哟| 国产97色在线日韩免费| 日韩欧美三级三区| 亚洲一区二区三区不卡视频| 这个男人来自地球电影免费观看| 人人妻,人人澡人人爽秒播| 高清av免费在线| 亚洲精品美女久久av网站| 国产熟女xx| www.www免费av| 伊人久久大香线蕉亚洲五| 亚洲国产中文字幕在线视频| 五月开心婷婷网| 欧美日韩av久久| 欧美日韩一级在线毛片| av欧美777| 黄色毛片三级朝国网站| 国产成人精品无人区| 国产一区二区三区视频了| 国产单亲对白刺激| 99国产精品免费福利视频| 色播在线永久视频| 免费看十八禁软件| 国产男靠女视频免费网站| 中文字幕最新亚洲高清| 国产精品自产拍在线观看55亚洲| 女同久久另类99精品国产91| 国产亚洲欧美98| 18禁国产床啪视频网站| 好看av亚洲va欧美ⅴa在| 久久精品成人免费网站| 免费看a级黄色片| 久久人妻av系列| 国产精品av久久久久免费| 亚洲中文字幕日韩| 国产单亲对白刺激| 天堂√8在线中文| 色老头精品视频在线观看| 在线观看日韩欧美| 日本 av在线| 精品高清国产在线一区| 又大又爽又粗| 无遮挡黄片免费观看| 夜夜躁狠狠躁天天躁| 性色av乱码一区二区三区2| 色哟哟哟哟哟哟| av网站在线播放免费| av有码第一页| 一级黄色大片毛片| 黄色片一级片一级黄色片| 国产精品久久久人人做人人爽| 国产亚洲精品综合一区在线观看 | 乱人伦中国视频| 国产人伦9x9x在线观看| 中文字幕人妻丝袜制服| 亚洲人成网站在线播放欧美日韩| 性欧美人与动物交配| 老汉色av国产亚洲站长工具| 亚洲av五月六月丁香网| x7x7x7水蜜桃| 欧美黄色片欧美黄色片| www日本在线高清视频| 操出白浆在线播放| 亚洲激情在线av| 无限看片的www在线观看| 99在线视频只有这里精品首页| avwww免费| 看黄色毛片网站| 嫁个100分男人电影在线观看| 亚洲国产毛片av蜜桃av| 国产精品电影一区二区三区| 亚洲国产欧美一区二区综合| 新久久久久国产一级毛片| 高潮久久久久久久久久久不卡| 日韩av在线大香蕉| 伊人久久大香线蕉亚洲五| 久久午夜综合久久蜜桃| 亚洲欧美一区二区三区黑人| 亚洲全国av大片| 久久影院123| 欧美成人性av电影在线观看| 日本免费一区二区三区高清不卡 | 精品国产亚洲在线| 91麻豆av在线| 成人亚洲精品一区在线观看| 丰满饥渴人妻一区二区三| 91麻豆av在线| 国产成人精品在线电影| 久久精品91蜜桃| 熟女少妇亚洲综合色aaa.| 亚洲狠狠婷婷综合久久图片| 国产无遮挡羞羞视频在线观看| www.精华液| 香蕉丝袜av| 精品电影一区二区在线| 91大片在线观看| 国产成人精品无人区| av天堂在线播放| 亚洲精品久久午夜乱码| 1024视频免费在线观看| 成人三级黄色视频| 精品高清国产在线一区| 成年人黄色毛片网站| 男女做爰动态图高潮gif福利片 | 一区二区三区激情视频| 一级片'在线观看视频| 黑丝袜美女国产一区| 每晚都被弄得嗷嗷叫到高潮| 国产高清videossex|