• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Microstructure and crystallographic evolution of ruthenium powder during biaxial vacuum hot pressing at different temperatures

    2021-07-26 00:39:14WANGChuanjunCHENJialinWENMingTANZhilongGUOJunmeiGUANWeimingDENGRui
    貴金屬 2021年1期
    關鍵詞:晶面熱壓斷口

    WANG Chuan-jun, CHEN Jia-lin, WEN Ming, TAN Zhi-long, GUO Jun-mei, GUAN Wei-ming, DENG Rui

    (Kunming Institute of Precious Metals, State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals, Sino-Platinum Metals Co. Ltd., Kunming 650106, China)

    Abstract: Ruthenium powders were compacted by biaxial vacuum hot pressing (VHP) at a sintering temperature of 1050°C to 1450°C for 2 hours. The compacted samples were characterized by scanning electron microcopy (SEM) and X-ray diffraction (XRD). The relative density of the VHP compacted samples reached 99.7% of the theoretical value when sintered at 1250°C,and its density decreased with the increase of sintering temperature. Different grain and pores morphologies were observed in different areas of the samples depending on the sintering temperature. XRD data revealed that a preferred orientation along the (002) direction was achieved during the sintering process. The results also showed a stress relaxation reduced with the increase of sintering temperature.

    Key words: ruthenium; vacuum hot pressing; microstructure; residual stress

    Ruthenium films, its alloy films and non-metallic com-pound films(oxide,nitride, et al)are widely used in areas such as electronic information, catalysis,electroplate and medicine, due to their stable chemical properties, excellent corrosion resisting property,oxidation resistance, good catalytic properties and high work function[1-9]. Two of the best-known application areas for ruthenium are the under-layers for perpendicular magnetic recording (PMR) for hard disk and the capacitor electrode materials for semiconductor storage (such as magnetic random access memory, MRAM[10]). The underlayers may include ruthenium and other alloying elements with the enhancements of refining grain size and reduced lattice misfit. These enhancements will improve the signalto-noise ratio (SNR) and the perpendicular magnetic anisotropy Ku of the magnetic recording medium.Normally, a ruthenium or ruthenium alloy sputtering target is used to produce ruthenium or ruthenium alloy film by magnetron sputtering. The requirement for ruthenium or ruthenium alloy targets is high density(near theoretical density), high purity, low gas content and fine while uniform grain size[11].

    Ruthenium target is often obtained via densifying a ruthenium powder by pressure sintering methods at high temperature, such as Vacuum Hot Pressing(VHP)[12],Hot Isostatic Pressing (HIP) and Sparking Plasma Sintering (SPS)[4,13]. The VHP method has its advantages considering the low cost and quick & easy maneuverability as com-pared with HIP and SPS. Though many documents were involved, the microstructure evolution and crystal-graphic variation of ruthenium powder during VHP are not fully understood. In this paper, high purity ruthenium powder was hot pressed with the same pressure and different temperatures. The microstructure evolution and crystallographic variation of ruthenium powder were observed and analyzed during the densification process.

    1 Experiment

    Ruthenium powder with a purity of 4N5 supplied by Sino-Platinum Metals Co. Ltd., (China) was used for the sintering experiments. The experiments were performed using a home-made VHP-H-2000/20 sintering apparatus. The powder samples were loaded in a graphite mold; a sample ofφ15×3 mm was obtained.The hot pressing experiments were performed at a temperature from 1050°C to 1450°C, at intervals of 100°C, a heating rate of 5~10°C/min, a dwell time of 240 min and a biaxial pressure of 40 MPa under vacuum of 1×10-2Pa.

    The apparent and tap density of the Ru powder were tested by a powder comprehensive characteristic tester (Bettersize, China, BT-1000). The density of the compacted samples was measured according to Archimedes’ principle in air and water. The relative densities of the samples were calculated assuming a theoretical density of Ruthenium of 12.37 g/cm3.The powder morphology and fractured surfaces of ruthenium samples were inspected by Scanning Electron Microscopy(Hitachi S-3400N). The morphology of both the surface and the area near the thickness center of the samples were observed. An X-ray diffractometer (XRD, Rigaku, D/MAX2500), using Cu Kαradiation (λ=0.1542 nm), was employed to identify the crystal structure of both powder and sintered samples with a step size of 0.02oand a counting time of 20 s/step within 30~110o。

    2 Results and discussions

    2.1 Microstructure of the raw Ru powder

    Fig.1 shows the morphology of raw Ru powder.

    Fig.1 SEM images of the Ru powder before sintering圖1 釕粉燒結前的SEM圖像

    Particles with the shape of near round and long rods can be seen. The size of a single particle is range from 0.1 μm to 0.8 μm and many particles are aggregated together and form a size of 1 μm to 10 μm.The apparent and tap density of the Ru powder is 1.88 g/cm3and 3.23 g/cm3respectively.

    Fig.2 shows the XRD patterns of the raw Ru powder.The relative intensity of (101) peak is the strongest. It shows a random orientation which corresponds to a texture and stress free state as compared with the standard card (JCPDS 06-0663).

    Fig.2 XRD pattern of Ru powder圖2 釕粉的XRD圖譜

    2.2 Density and microstructure of the as-sintered Ru samples

    Fig.3 shows the relative density of the sintered ruthenium samples as a function of temperature.

    Fig.3 Relative density of the sintered Ru samples as a function of temperature圖3 釕樣品的相對密度與溫度的函數(shù)關系

    The relative density of the Ru sample is 97.9%after sintered at 1050°C. It then increases with the increasing of the temperature and sharply achieved at 99.43% at 1150°C and arrived at a peak value of 99.7%at 1250°C. While the temperature further going up, the relative value decreases to 99.6% when the sintering temperature is 1350°C, and it quickly lower down to 98.3% at 1450°C. Obviously, the relative density is not increasing simply with the rise of the temperature which is failed to agree with the common sense reasoning. Meanwhile, the relative density obtained in this paper is higher than other literatures in the same temperature no matter it is sintered by HP[14]or SPS[13-14]. The reason for high relative density should be the large pressure applied here[15].

    During the sintering process, the powder particles in Fig.1 were compacted mainly due to necking and contact with each other at first, gas among the particles was evacuated away, and the porosity rate was decreased. Fig.4 is the fracture morphology of samples sintered at 1050°C, both in the center and at the surface of the sample.

    Fig.4 The fracture morphologies of samples sintered at 1050°C 圖4 經1050℃煅燒后釕粉的斷口形貌

    Fig.4(a) and (b) are the microstructure in the center of the sample, while (c) and (d) are the microstructure at the surface. It is characteristic of an intergranular fracture. The grains are uniform, the size of which is about 2~7 μm. According to the mor- phology of the intergranular boundaries, polyhedron grains were obtained after the hot pressing, so the Ru grains could be similar with a rigid body, since grain size can only coarsen from merging of small grains into big ones.Compared with the particle size in Fig.1, the grain size was greatly increased. Some near round pores are visible among grain boundaries, the size of which is about 0.5~2 μm. Obviously, at this sintering temperature, thermodynamics condition is not enough to eliminate all the pores, which also resulted in a relative low density.

    Fig.5 shows the micrograph of samples sintered at 1150°C.

    Fig.5 The fracture morphologies of samples sintered at 1150°C 圖5 經1150℃煅燒后釕粉的斷口形貌

    Similar fracture characteristic and microstructure is shown as compared with that of 1050°C. The size of the grains is about 2~8 μm in the center (Fig.5(a) and Fig.5(b)) and 2~5 μm at the surface (Fig.5(a) and Fig.5(b)), and the average size is larger due to the temperature increment. The pores are migrating to the surface of grains, the number, depth and size of which are all decreased. The pore size is about 0.2~1 μm for the center sample and 0.4~1 μm for the surface sample. This also accords well with the sharply density increment.

    Fig.6 shows the micrograph of samples sintered at 1250°C. In Fig.6, more uniform grain distribution and few pores are apparently visible. Although some small grains can be seen, the left is well distributed. The grain size is about 1~7 μm and 1~5 μm for the center area(Fig.6(a) and Fig.6(b)) and surface area (Fig.6(c) and Fig.6(d)) respectively. Only little shallow pores are located on the surface of the grains. This helps the density reach a peak value. Fig.5 The fracture morphologies of samples sintered at 1150°C, (a) and (b)in the center; (c) and (d) at the surface.

    Fig.6 The fracture morphologies of samples sintered at 1250°C 圖6 經1250℃煅燒后釕粉的斷口形貌

    With the further increasing of the sintering temperature to 1350°C, something unusual has happened.As shown in Fig.7, on the surface and in the center of the sintered sample, there were areas with rare pores (Fig.7(a)and Fig.6(b)). Meanwhile, there are some pores intensive areas. These areas are between the surface and the center,the thickness spread is about 60 μm. Pores are large in size (about 0.3~2 m) and distribute on all the grain boundaries of this area(Fig.7(c) and Fig.6(d)). The grain size in the sample center increase with the temperature rise, about 2~9 μm, and some of them begin to coarsening. If we set area with rare pores as A and the pores intensive areas as B, then an A/B/A/B/A structure was formed throughout the thickness. This means more gas was trapped in the pore intensive area. It’s easy to deduce that once the surface areas were highly densified, it’s hard for the trapped gas evacuated from the area between the surface and the center. The existence of pores intensive areas lowers down the relative density.

    Fig.7 The fracture morphologies of samples sintered at 1350°C 圖7 經1350℃煅燒后釕粉的斷口形貌

    Fig.8 shows the fracture morphologies of samples sintered at 1450°C.

    Fig.8 The fracture morphologies of samples sintered at 1450°C 圖8 經1450℃煅燒后釕粉的斷口形貌

    As the temperature rising to 1450°C, the grain size in the center of the sample is as large as 5~20 μm, which shows an obvious coarsening process due to growing of small grains driven by a diffusion process, as shown in Fig.8(a~b). Shallow pores with the size of 0.2~0.6 μm are visible on the surface of the grains both located on the boundary and in the grains (Fig.8(b). Surprisingly,some grains with a river patterns with different directions on the surface are also seen, which normally appears on workable metals. And this indicates lattice directions may slip along some slip bands under the high temperature and pressure. Meanwhile, for the area on the surface of the sample, no obvious grain boundaries are seen on most part of this area, as shown in Fig.8(c~f). This area has two types of morphologies:One type is the Ru matrix which was fused together,and the other type is grains distributing in the Ru matrix and the size of which is about several micrometers.Both the Ru matrix and the grains are not in polyhedron shape. And relatively big grains with the size of 6~27 μm are connected to each other located on the area between the center and the surface of the sample. Pits with sharp edge and long shape are bestrewing on the surface of both the Ru matrix and the distributed grains.

    For the vacuum hot pressing process, deformation of powders is achieved both by the temperature and biaxial pressure. During the sintering process, the reduction of porosity rate is accompanied by the transformation of atoms and vacancies. The transformation of atoms can be realized by many mechanisms such as dislocation slip, dislocation climb,diffusion and creep. As what was assumed in hot isostatic pressing, the main densification mechanisms during vacuum hot pressing are[16]: Plastic yielding,power law creep densification by diffusion and creep.Initially, the powder particles contact with each other.These common points between two particles just suffer an elastic deformation, but once pressure approaches its target value, the higher force causes plastic yielding and contacts transform from points to contact areas between particles[17]. The increase in size of these contacts makes the sustained pressure to decrease, ceasing yielding. After that creep would happen during the sintering process.

    Creep can occur either by the process of diffusion,or through propagation of crystal defects, known as intracrystalline slip. The creep behavior of powder mass has been considered in several published models,both under hot isostatic stress[18-21]and uniaxial conditions[17]. At low temperatures and high stresses,power-law creep is the main deformation process in the contact zone. While at high temperatures and low stresses diffusion creep instead of power-law creep becomes the dominating deformation process.Moreover, at temperatures above 60% of the melting point, deformation is thought to occur through diffusive mass transfer or creep. Nabarro-Herring creep[22]is a process by which atoms vacancies or defects exchange through the lattice. This form of creep is also known as bulk diffusion. Coble creep[22]is a process where diffusion occurs along grain boundaries. The grain boundaries provide an enhanced diffusivity path for diffusion to occur. When Ru powders were sintered at relatively low temperature between 1050°C to 1250°C,power law creep is the main deformation process in the contact zone. When the contact zone area increase and particles cease yielding, both Nabarro-Herring creep and Coble creep is effective for the densification process. The porosity rate of the Ru samples is decreasing and the relatively density increasing as the sintering temperature increases, as shown in Fig.3. This is normal phenomena for many other metals. But as the sintering temperature further bumping up, the creep mechanisms may differ from what was shown at lower temperatures. When sintering at 1350°C, it is above 60%of the melting point of Ru. The fracture morphologies in Fig.7 showed areas with rare pores coexist with pores intensive areas. This means during the sintering process,when some areas were highly densification, there are other areas which still have large and wide spread pores.The morphology inhomogeneity is not rare for materials sintered by vacuum hot pressing method;some authors[14]have found that coarser particles may appear on the surface of the samples which have direct contact with the pressing graphite. The creep mechanism in these areas could be the Nabarro-Herring creep, where bulk diffusion is the domination. And for the areas with pores intensive features the Coble creep should be the main mechanism. Once an area was highly densified, diffusion for the vacancies is harder,which will exacerbate the morphology inhomogeneity.The relative density was slightly dropped after sintering at this temperature.

    Literatures had shown the workability of Ru and some Ru alloys at the temperature as high as 1450°C and above[23], which means at high temperatures the deformation mechanism may differ from what it was at low temperatures. Stress changes the chemical potential of atoms on the surface of the grains in a polycrystalline materials when suffers stress. The atoms of the crystal lattice at the side faces are shifted by the tensile stress a little bit apart from each other, where the lattice of the top and bottom surface is a little squeezed together.Thus, vacancies from the top and bottom surfaces diffuse to the side faces. And the atoms on the surface were fused together just like what would show for materials which have good workability. And deformation river patterns may display on some particles due to the atom climb and slide. When the surface was fused together and particle boundaries are largely reduced, Nabarro-Herring creep instead of Coble creep should be the main creep mechanism.Therefore, if pores were trapped in the center of the samples, it is hard to diffusion outward the surface which would result in a decrease of the density.

    2.3 Crystallographic evolution of the as-sintered Ru samples

    Fig.9 shows the X-Ray diffraction patterns of Ru samples compacted at different sintering temperatures.All major X-ray diffraction peaks can be seen in Fig.9.Compared with the patterns of Ru powder in Fig.2,which can be considered as stress free and with a random orientation, samples compacted at high temperatures all show preferred orientation. The most remarkable change is the preferred orientation along the(002) direction and decline of the (101) peaks. For the application of Ru target in data storage industry, a preferred orientation of (002), (112) and (004) direction is preferred[11].

    Fig.10 shows the integrated intensity ratios of the Ru (002) to Ru (100) peak and Ru (002) to Ru (101)peak as a function of sintering temperature, the value of powder in Fig.2 was taken as the ratio of room temperature. The reason for using the ratio of the Ru(002) to Ru (100) peaks is that both of those planes are orthogonal[24]. Meanwhile, the abrupt change of (101)peaks from powder to sintered state is the reason to use the ratio of the Ru (100) to Ru (101) peak. The Ru (002)to (100) ratio increases firstly to a peak value after compacted at 1050°C. It then decreases with the sintering temperature and reach a low turning point at 1350°C. Thereafter, the ration has a slight increase at 1450°C. The Ru (002) to Ru (101) ratio has a similar tendency but different slop.

    Fig.10 The integrated ratios of the Ru(002) to Ru(100)peak and Ru (002) to Ru (101) peak as a function of sintering temperature圖10 Ru(002)-Ru(100)峰和Ru(002)-Ru(101)峰的綜合比值隨燒結溫度的變化

    By fitting major peaks in Fig.9, the accurate peak positons can be identified. The distance between the same kinds of crystal planes can be calculated from the peak positons, as shown in Fig.11. In Fig.11 the distance for (100), (002), (101), (110) planes with different sintering temperature were chosen. The principal residual stress σ can be estimated from lattice strain (d-d0)/d0, Young’s modulus,Ef, and Poisson ratio,vf, of the compacted samples according to the following equation[13,25]:

    Fig.9 XRD patterns of Ru compacted at different sintering temperatures圖9 釕經不同溫度熱壓后的XRD圖譜

    wheredandd0are the plane spacing for compacted samples and standard sample determined by XRD measurements. The values ofd0are from the X-ray powder diffraction in Fig.2 and have been taken as the standard values. The negative value in this equation indicates a compressive stress.

    Fig.11 shows the variations of the distance for(100), (002), (101), (110) planes with sintering temperature. (d0is the value from the XRD pattern in Fig.2). It can be seen from Fig.11, the differences between thed-value of compacted samples and the powder sample become small from 1050°C to 1150°C,turns around to a higher value at 1250°C and become small again as the temperature is increased, and reach a lowest value at 1450°C. Most of the time, the residual stress is compressive stress. Attention should be paid to the values at 1450°C, it’s the lowest value for (100),near zero for (101) and (110) planes, negative for the(002) planes, which means the principal residual stress σ was decreasing at this temperature, and transforming from compressive stress into zero or tensile stress,which also means a stress relaxation as increasing the sintering temperature.

    Fig.11 The variations of the distance for Ru(100), (002), (101), (110) planes with sintering temperature圖11 不同溫度燒結后Ru(100), (002), (101), (110)晶面距離的變化

    3 Conclusions

    Ruthenium with a density near theoretical value and uniform and fine grain size can be achieved by biaxial vacuum hot pressing. Different grain and pores morphologies can be seen for different area of the samples depending on the sintering temperature for the compacted samples. The porosity rate and different densification mechanisms at different temperatures result in the density variation of the samples. A preferred orientation along the (002) direction was achieved by the biaxial pressing process. Stress relaxation as sintering temperature increment has been found.

    猜你喜歡
    晶面熱壓斷口
    42CrMo4鋼斷口藍化效果的影響因素
    乙酸乙酯與ε-CL-20不同晶面的微觀作用機制
    火炸藥學報(2022年5期)2022-11-04 02:30:48
    一起熱壓三通開裂失效機理研究
    126 kV三斷口串聯(lián)真空斷路器電容和斷口分壓的量化研究
    寧夏電力(2022年1期)2022-04-29 03:49:18
    基于FPGA熱壓罐的溫度和氣壓控制研究
    NaCl單晶非切割面晶面的X射線衍射
    物理實驗(2019年7期)2019-08-06 05:35:56
    陶瓷纖維擺塊式熱壓卷圓模設計
    模具制造(2019年3期)2019-06-06 02:10:52
    (100)/(111)面金剛石膜抗氧等離子刻蝕能力
    不同硅晶面指數(shù)上的類倒金字塔結構研究與分析?
    物理學報(2018年22期)2018-12-18 05:58:28
    ER50-6盤條斷裂原因分析
    亚洲精品成人av观看孕妇| kizo精华| tocl精华| 国产高清videossex| 咕卡用的链子| 欧美+亚洲+日韩+国产| 美女高潮喷水抽搐中文字幕| 久久九九热精品免费| www.精华液| 国产精品久久久久成人av| 老熟女久久久| 国产精品av久久久久免费| 亚洲人成电影免费在线| 丁香六月欧美| 日韩中文字幕欧美一区二区| h视频一区二区三区| 精品国产乱码久久久久久男人| 一进一出抽搐动态| 久久 成人 亚洲| 婷婷成人精品国产| 欧美激情极品国产一区二区三区| 亚洲色图 男人天堂 中文字幕| 男女高潮啪啪啪动态图| 黄网站色视频无遮挡免费观看| 午夜免费观看性视频| 亚洲欧美一区二区三区黑人| 一级片'在线观看视频| 欧美乱码精品一区二区三区| 国产一区有黄有色的免费视频| 一个人免费在线观看的高清视频 | 欧美国产精品一级二级三级| 亚洲欧美精品综合一区二区三区| 久久天堂一区二区三区四区| 18在线观看网站| 国产成人啪精品午夜网站| 免费在线观看视频国产中文字幕亚洲 | 999精品在线视频| 国产一卡二卡三卡精品| 91国产中文字幕| 精品一区在线观看国产| 丝袜脚勾引网站| 国产成人系列免费观看| 中文字幕另类日韩欧美亚洲嫩草| 亚洲人成电影观看| 中文字幕最新亚洲高清| 久久精品国产综合久久久| 精品少妇一区二区三区视频日本电影| 日韩欧美一区二区三区在线观看 | 日韩视频在线欧美| 黄频高清免费视频| 国产男人的电影天堂91| 黑人巨大精品欧美一区二区mp4| 两个人免费观看高清视频| 老鸭窝网址在线观看| 色综合欧美亚洲国产小说| 精品久久久精品久久久| 巨乳人妻的诱惑在线观看| 肉色欧美久久久久久久蜜桃| 欧美日韩亚洲国产一区二区在线观看 | 天堂中文最新版在线下载| 国产区一区二久久| 岛国在线观看网站| 他把我摸到了高潮在线观看 | 正在播放国产对白刺激| 一级黄色大片毛片| 欧美日本中文国产一区发布| 99热网站在线观看| 在线 av 中文字幕| 久久毛片免费看一区二区三区| 伊人亚洲综合成人网| 欧美国产精品一级二级三级| 国产日韩欧美视频二区| 丁香六月天网| 一本一本久久a久久精品综合妖精| 午夜福利免费观看在线| 天天操日日干夜夜撸| 极品人妻少妇av视频| 中国国产av一级| 亚洲熟女毛片儿| 亚洲精品一二三| 亚洲五月婷婷丁香| 亚洲精品av麻豆狂野| 每晚都被弄得嗷嗷叫到高潮| 99国产综合亚洲精品| 一本—道久久a久久精品蜜桃钙片| 国产在视频线精品| 午夜免费观看性视频| 又大又爽又粗| 窝窝影院91人妻| 999久久久国产精品视频| av有码第一页| 一本—道久久a久久精品蜜桃钙片| 久久精品亚洲熟妇少妇任你| 久久中文看片网| 两性夫妻黄色片| 脱女人内裤的视频| 91成人精品电影| 亚洲欧美精品自产自拍| 亚洲欧洲精品一区二区精品久久久| 精品少妇一区二区三区视频日本电影| 国产一区二区激情短视频 | 久久狼人影院| 汤姆久久久久久久影院中文字幕| 亚洲精品av麻豆狂野| av天堂在线播放| 欧美日韩亚洲综合一区二区三区_| 一本—道久久a久久精品蜜桃钙片| 亚洲va日本ⅴa欧美va伊人久久 | 亚洲免费av在线视频| 一本大道久久a久久精品| 女人高潮潮喷娇喘18禁视频| 成年美女黄网站色视频大全免费| 老司机福利观看| 岛国在线观看网站| 宅男免费午夜| 免费观看a级毛片全部| 色视频在线一区二区三区| 激情视频va一区二区三区| 久久中文看片网| 欧美精品一区二区免费开放| 国产免费视频播放在线视频| 日本91视频免费播放| 国产亚洲精品久久久久5区| 亚洲免费av在线视频| 一本久久精品| 天天影视国产精品| av网站免费在线观看视频| 男人操女人黄网站| 高清在线国产一区| 在线观看www视频免费| 热99久久久久精品小说推荐| 男人操女人黄网站| netflix在线观看网站| 日韩欧美国产一区二区入口| 精品国产乱码久久久久久男人| 亚洲国产av新网站| 中文字幕精品免费在线观看视频| 久久久精品免费免费高清| 这个男人来自地球电影免费观看| 久久午夜综合久久蜜桃| 嫩草影视91久久| 90打野战视频偷拍视频| 欧美一级毛片孕妇| 老司机在亚洲福利影院| 深夜精品福利| 久久这里只有精品19| 精品久久久精品久久久| 国产真人三级小视频在线观看| 亚洲七黄色美女视频| 中文精品一卡2卡3卡4更新| 亚洲一区中文字幕在线| 国产伦理片在线播放av一区| 69精品国产乱码久久久| 一本综合久久免费| 国产av一区二区精品久久| 国产成人影院久久av| 成人18禁高潮啪啪吃奶动态图| 久久久久久免费高清国产稀缺| kizo精华| 日韩制服骚丝袜av| 欧美精品亚洲一区二区| 免费在线观看完整版高清| 男人操女人黄网站| 我要看黄色一级片免费的| 91成人精品电影| 永久免费av网站大全| 国产成人啪精品午夜网站| 黄色视频在线播放观看不卡| 在线精品无人区一区二区三| 免费不卡黄色视频| 久久久久网色| 欧美午夜高清在线| 一区二区av电影网| 夜夜骑夜夜射夜夜干| 美女午夜性视频免费| 90打野战视频偷拍视频| 免费在线观看黄色视频的| 一区二区三区四区激情视频| 亚洲成人免费电影在线观看| 日本五十路高清| 人妻 亚洲 视频| 国产免费一区二区三区四区乱码| 久久精品亚洲熟妇少妇任你| 中文字幕制服av| 国产精品二区激情视频| 免费看十八禁软件| 亚洲免费av在线视频| 99久久综合免费| 久久久精品区二区三区| 中文字幕另类日韩欧美亚洲嫩草| 啦啦啦中文免费视频观看日本| 日本91视频免费播放| 免费高清在线观看视频在线观看| 欧美国产精品va在线观看不卡| 宅男免费午夜| 高清av免费在线| 久久久久久人人人人人| 久久精品成人免费网站| 一本综合久久免费| av有码第一页| 精品第一国产精品| 国产野战对白在线观看| 免费观看a级毛片全部| 热99国产精品久久久久久7| 日本精品一区二区三区蜜桃| 欧美日韩亚洲国产一区二区在线观看 | 人成视频在线观看免费观看| 午夜91福利影院| 另类亚洲欧美激情| 99久久国产精品久久久| 丁香六月欧美| 亚洲欧美清纯卡通| √禁漫天堂资源中文www| 国产成人a∨麻豆精品| 999久久久精品免费观看国产| 在线精品无人区一区二区三| 亚洲熟女精品中文字幕| 黄色a级毛片大全视频| 国产精品免费视频内射| 欧美变态另类bdsm刘玥| 国产精品久久久久久人妻精品电影 | 国产免费现黄频在线看| 久久久精品国产亚洲av高清涩受| 色播在线永久视频| 亚洲伊人色综图| 成在线人永久免费视频| 亚洲精品乱久久久久久| 老司机影院成人| 久久精品熟女亚洲av麻豆精品| 亚洲欧美精品自产自拍| 少妇猛男粗大的猛烈进出视频| h视频一区二区三区| 一区二区av电影网| 高清黄色对白视频在线免费看| 久久久久网色| 国产成人系列免费观看| 黄频高清免费视频| 自拍欧美九色日韩亚洲蝌蚪91| 欧美人与性动交α欧美软件| 无遮挡黄片免费观看| 免费女性裸体啪啪无遮挡网站| 国产97色在线日韩免费| 窝窝影院91人妻| 午夜精品国产一区二区电影| 一二三四社区在线视频社区8| 超色免费av| 精品一区二区三区av网在线观看 | 亚洲国产欧美在线一区| 精品国产国语对白av| 日本五十路高清| 久久人妻熟女aⅴ| 一级片'在线观看视频| 久久久久国产精品人妻一区二区| 亚洲第一青青草原| 国产成人影院久久av| 淫妇啪啪啪对白视频 | 成年人免费黄色播放视频| 免费观看a级毛片全部| 国产亚洲欧美精品永久| 亚洲欧美精品综合一区二区三区| 久久久久精品人妻al黑| 老司机午夜福利在线观看视频 | 欧美大码av| 国产亚洲一区二区精品| 欧美精品一区二区大全| 欧美性长视频在线观看| 亚洲av日韩精品久久久久久密| av一本久久久久| 亚洲国产毛片av蜜桃av| 日本wwww免费看| 性色av一级| 满18在线观看网站| 国产在视频线精品| 黄色视频,在线免费观看| 黄色怎么调成土黄色| 欧美变态另类bdsm刘玥| 国产成人啪精品午夜网站| 91成人精品电影| 国产极品粉嫩免费观看在线| 国产亚洲一区二区精品| 亚洲av欧美aⅴ国产| 欧美日韩国产mv在线观看视频| 一本一本久久a久久精品综合妖精| 国产男女内射视频| 亚洲国产看品久久| 午夜激情久久久久久久| 国产又爽黄色视频| 大码成人一级视频| 天天躁狠狠躁夜夜躁狠狠躁| 日韩制服骚丝袜av| 日韩欧美国产一区二区入口| 国产欧美日韩综合在线一区二区| 丝袜在线中文字幕| 成年人黄色毛片网站| 侵犯人妻中文字幕一二三四区| 免费观看人在逋| 热re99久久国产66热| 国产欧美日韩精品亚洲av| 精品一区在线观看国产| 日韩欧美一区二区三区在线观看 | 交换朋友夫妻互换小说| 我要看黄色一级片免费的| 久久久国产精品麻豆| 久久人人爽av亚洲精品天堂| 1024香蕉在线观看| 国产精品一区二区在线不卡| 久久天堂一区二区三区四区| 搡老乐熟女国产| 男人添女人高潮全过程视频| 狂野欧美激情性xxxx| 国产精品影院久久| 99久久精品国产亚洲精品| 纯流量卡能插随身wifi吗| 亚洲av日韩在线播放| av天堂久久9| 男女无遮挡免费网站观看| 18在线观看网站| 免费一级毛片在线播放高清视频 | 香蕉国产在线看| 国产亚洲av高清不卡| 久久精品国产亚洲av高清一级| 天天躁日日躁夜夜躁夜夜| 视频区欧美日本亚洲| 高潮久久久久久久久久久不卡| av视频免费观看在线观看| 美女扒开内裤让男人捅视频| 精品国产一区二区三区四区第35| 亚洲国产欧美在线一区| 男人添女人高潮全过程视频| 亚洲精品国产一区二区精华液| 91成人精品电影| 极品人妻少妇av视频| 成人国产一区最新在线观看| 99热国产这里只有精品6| 美女视频免费永久观看网站| 91国产中文字幕| 午夜两性在线视频| 18在线观看网站| 国产精品免费视频内射| 丝袜人妻中文字幕| 啦啦啦啦在线视频资源| 日本av免费视频播放| 丰满饥渴人妻一区二区三| 日韩人妻精品一区2区三区| 热99国产精品久久久久久7| 肉色欧美久久久久久久蜜桃| 老司机亚洲免费影院| 精品国产一区二区三区久久久樱花| 少妇猛男粗大的猛烈进出视频| 啦啦啦 在线观看视频| 亚洲精品久久午夜乱码| 中文字幕人妻丝袜一区二区| 国产99久久九九免费精品| 亚洲精品美女久久久久99蜜臀| 精品第一国产精品| 老汉色av国产亚洲站长工具| 国产1区2区3区精品| 一本一本久久a久久精品综合妖精| 99热网站在线观看| 丁香六月欧美| 国产精品欧美亚洲77777| 精品少妇一区二区三区视频日本电影| 80岁老熟妇乱子伦牲交| 18禁黄网站禁片午夜丰满| 在线十欧美十亚洲十日本专区| 老汉色av国产亚洲站长工具| 中文精品一卡2卡3卡4更新| 久久久久久久大尺度免费视频| 国产成人精品无人区| 窝窝影院91人妻| 日韩欧美一区二区三区在线观看 | 亚洲专区国产一区二区| 人人妻人人澡人人爽人人夜夜| 正在播放国产对白刺激| 欧美av亚洲av综合av国产av| 免费人妻精品一区二区三区视频| 午夜91福利影院| 亚洲性夜色夜夜综合| 黑人操中国人逼视频| 免费高清在线观看日韩| 欧美 亚洲 国产 日韩一| 免费女性裸体啪啪无遮挡网站| 不卡av一区二区三区| 男女免费视频国产| 黄色视频在线播放观看不卡| 超色免费av| 超碰97精品在线观看| 欧美人与性动交α欧美精品济南到| 国产无遮挡羞羞视频在线观看| 亚洲色图 男人天堂 中文字幕| 丝袜在线中文字幕| 精品一区二区三区四区五区乱码| tube8黄色片| 少妇的丰满在线观看| 午夜影院在线不卡| 夫妻午夜视频| 欧美老熟妇乱子伦牲交| 看免费av毛片| 大陆偷拍与自拍| 高清欧美精品videossex| 男女免费视频国产| 黑人巨大精品欧美一区二区mp4| 欧美日韩成人在线一区二区| 亚洲精品国产区一区二| 热99re8久久精品国产| 97在线人人人人妻| 久久久国产一区二区| 国产av一区二区精品久久| 91大片在线观看| 欧美黑人欧美精品刺激| 中文字幕高清在线视频| 狠狠婷婷综合久久久久久88av| 岛国在线观看网站| a在线观看视频网站| 超碰97精品在线观看| 精品熟女少妇八av免费久了| 精品亚洲乱码少妇综合久久| 午夜激情久久久久久久| 欧美激情 高清一区二区三区| 精品国产乱子伦一区二区三区 | 亚洲va日本ⅴa欧美va伊人久久 | 在线十欧美十亚洲十日本专区| 国产精品久久久久久人妻精品电影 | 日韩中文字幕欧美一区二区| 别揉我奶头~嗯~啊~动态视频 | 熟女少妇亚洲综合色aaa.| 精品视频人人做人人爽| 9色porny在线观看| 美女高潮到喷水免费观看| 亚洲av成人一区二区三| 51午夜福利影视在线观看| av欧美777| 精品一区在线观看国产| 国产一区二区三区综合在线观看| 热re99久久国产66热| 精品国产乱码久久久久久男人| a级毛片黄视频| 日韩大码丰满熟妇| 飞空精品影院首页| 久久久久久亚洲精品国产蜜桃av| 亚洲精品粉嫩美女一区| 50天的宝宝边吃奶边哭怎么回事| 国产一区二区激情短视频 | 最新的欧美精品一区二区| 亚洲精品国产区一区二| 免费不卡黄色视频| 两个人免费观看高清视频| 久久人人爽av亚洲精品天堂| 一个人免费在线观看的高清视频 | 亚洲av电影在线进入| 91九色精品人成在线观看| 肉色欧美久久久久久久蜜桃| 侵犯人妻中文字幕一二三四区| 欧美日韩视频精品一区| 国产亚洲精品第一综合不卡| 欧美另类一区| 老汉色av国产亚洲站长工具| 亚洲精品国产av成人精品| 大型av网站在线播放| 午夜两性在线视频| 国产精品秋霞免费鲁丝片| 国产日韩欧美在线精品| 国产一区二区 视频在线| 女性生殖器流出的白浆| 99国产精品一区二区三区| 色精品久久人妻99蜜桃| 999精品在线视频| 日本撒尿小便嘘嘘汇集6| 国产成人系列免费观看| 久久国产精品人妻蜜桃| 日韩视频一区二区在线观看| 国产老妇伦熟女老妇高清| 黄片大片在线免费观看| 99国产极品粉嫩在线观看| 亚洲精品国产一区二区精华液| 人妻一区二区av| 久久 成人 亚洲| 亚洲精品中文字幕一二三四区 | 高清视频免费观看一区二区| 欧美日韩国产mv在线观看视频| 欧美精品一区二区大全| 悠悠久久av| 亚洲成国产人片在线观看| 80岁老熟妇乱子伦牲交| 免费一级毛片在线播放高清视频 | 国产激情久久老熟女| 午夜福利,免费看| 精品高清国产在线一区| 久久99一区二区三区| 天堂俺去俺来也www色官网| 最黄视频免费看| 日本91视频免费播放| 国产高清videossex| 五月开心婷婷网| 女性被躁到高潮视频| 午夜福利在线观看吧| 狠狠精品人妻久久久久久综合| 一本—道久久a久久精品蜜桃钙片| 热99久久久久精品小说推荐| 99久久综合免费| 久久久久久久久久久久大奶| 国产一级毛片在线| 91麻豆av在线| 美女高潮喷水抽搐中文字幕| 午夜福利影视在线免费观看| 汤姆久久久久久久影院中文字幕| 午夜免费成人在线视频| 国产精品欧美亚洲77777| 岛国毛片在线播放| www日本在线高清视频| 嫁个100分男人电影在线观看| 乱人伦中国视频| 欧美国产精品一级二级三级| videosex国产| 久久久久国产精品人妻一区二区| 精品国产一区二区久久| 国产精品久久久人人做人人爽| 精品国内亚洲2022精品成人 | 久久狼人影院| 啦啦啦在线免费观看视频4| 免费女性裸体啪啪无遮挡网站| 激情视频va一区二区三区| 亚洲免费av在线视频| 欧美老熟妇乱子伦牲交| 日韩免费高清中文字幕av| 嫁个100分男人电影在线观看| 精品亚洲乱码少妇综合久久| 成人影院久久| 日韩视频一区二区在线观看| 99热全是精品| 国产成人免费观看mmmm| 美女高潮喷水抽搐中文字幕| 国产精品久久久久成人av| 久久九九热精品免费| 无遮挡黄片免费观看| 久久人人爽av亚洲精品天堂| 男女之事视频高清在线观看| 国产成人欧美| 国产精品免费大片| 美女高潮到喷水免费观看| 欧美日韩精品网址| 热99re8久久精品国产| av视频免费观看在线观看| 午夜日韩欧美国产| 亚洲激情五月婷婷啪啪| 日韩制服丝袜自拍偷拍| www.熟女人妻精品国产| 亚洲人成77777在线视频| av免费在线观看网站| 日韩制服骚丝袜av| 亚洲第一青青草原| 亚洲自偷自拍图片 自拍| 国产精品偷伦视频观看了| av线在线观看网站| 久久久久久亚洲精品国产蜜桃av| tube8黄色片| 国产亚洲欧美精品永久| 欧美黑人精品巨大| 欧美国产精品一级二级三级| 国产精品国产av在线观看| 多毛熟女@视频| 国产又色又爽无遮挡免| 亚洲情色 制服丝袜| 精品少妇黑人巨大在线播放| 久久国产亚洲av麻豆专区| 成在线人永久免费视频| 亚洲va日本ⅴa欧美va伊人久久 | av一本久久久久| 欧美黑人欧美精品刺激| 久久国产亚洲av麻豆专区| 久久人妻福利社区极品人妻图片| a级毛片黄视频| 免费高清在线观看视频在线观看| 女人被躁到高潮嗷嗷叫费观| 性少妇av在线| 青春草视频在线免费观看| 精品一区在线观看国产| 久久久久精品人妻al黑| 99九九在线精品视频| cao死你这个sao货| 热re99久久精品国产66热6| 最黄视频免费看| 久久精品熟女亚洲av麻豆精品| 99久久综合免费| 久久精品亚洲av国产电影网| 日韩视频在线欧美| 99久久综合免费| 青草久久国产| 精品国产一区二区三区四区第35| 中文字幕高清在线视频| 亚洲五月婷婷丁香| 美女中出高潮动态图| 亚洲国产欧美网| 亚洲美女黄色视频免费看| 成年动漫av网址| 欧美乱码精品一区二区三区| 后天国语完整版免费观看| 久热这里只有精品99| 一区二区三区乱码不卡18| 麻豆国产av国片精品| 午夜福利一区二区在线看| 无限看片的www在线观看| 欧美日韩福利视频一区二区| 久久天堂一区二区三区四区| 两性午夜刺激爽爽歪歪视频在线观看 | 97精品久久久久久久久久精品| 国产精品亚洲av一区麻豆| 国产在线免费精品| 国产精品国产三级国产专区5o| 亚洲综合色网址| 国产精品一区二区在线观看99| 欧美成人午夜精品| 爱豆传媒免费全集在线观看| 亚洲国产日韩一区二区| 国产亚洲av高清不卡|