• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Quantitative analysis of the main components in ceramic raw materials based on the desktop LIBS analyzer

    2022-09-14 08:18:06PengZHANG張鵬LanxiangSUN孫蘭香HaibinYU于海斌andPengZENG曾鵬
    Plasma Science and Technology 2022年8期
    關鍵詞:張鵬

    Peng ZHANG (張鵬),Lanxiang SUN (孫蘭香),Haibin YU (于海斌) and Peng ZENG (曾鵬)

    1 State Key Laboratory of Robotics,Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang 110016,People’s Republic of China

    2 Key Laboratory of Networked Control Systems,Chinese Academy of Sciences,Shenyang 110016,People’s Republic of China

    3 Institutes for Robotics and Intelligent Manufacturing,Chinese Academy of Sciences,Shenyang 110016,People’s Republic of China

    Abstract The concentrations of SiO2,Al2O3,K2O,Na2O,CaO,MgO,Fe2O3 and TiO2,and loss on ignition(L.O.I.)are the main inorganic components of geological samples.Concentrations of the eight oxides and L.O.I.are also the main indicators of concern in the production of building ceramics.Quantitative analysis of the eight oxides and L.O.I.was performed using fiber-laserbased laser-induced breakdown spectroscopy(LIBS).A combination of continuous background deduction,full width at half maximum (FWHM) intensity integral and spectral sum normalization was proposed for data processing.After the data processing combined the continuous background deduction,FWHM intensity integral and spectral sum normalization,the mean absolute errors(MAEs)of the calibration of L.O.I.,SiO2,Al2O3,K2O,Na2O,CaO,MgO,Fe2O3 and TiO2 was reduced from 2.03%,12.06%,4.84%,1.10%,0.69%,0.31%,0.11%,0.20%and 0.10% to 1.80%,9.48%,2.12%,0.36%,0.58%,0.11%,0.08%,0.19% and 0.05%,respectively.This multivariate method was further introduced and discussed to improve the analysis performance.The MAEs of L.O.I.,SiO2,Al2O3,K2O and Na2O were further reduced to 1.12%,2.07%,1.38%,0.35% and 0.43%,respectively.The results show that the overall prediction error can meet the requirements for the production of building ceramics.The LIBS desktop analyzer has great potential in detection applications on geological samples.

    Keywords: laser-induced breakdown spectroscopy,fiber laser,quantitative analysis,matrix effects,geological samples

    1.Introduction

    As a consequence of the continuous large-scale investment in the field of infrastructure construction and improvement in living standards,there is a huge demand for building ceramics in the construction industry in China.Building ceramics production is a process industry with high-energy consumption.The content of key components in ceramic formulas determines both cost factors (e.g.the energy consumption in the firing process) and quality factors(such as the whiteness,transparency and flatness of products).Therefore,the detection and analysis of the concentrations of key elements in the green body before firing will not only realize better quality control,but the reduction of energy consumption and pollution.At present,the daily production of the building ceramics industry lacks rapid detection methods,and usually depends on the experience and judgment of technicians,resulting in high production risk.Traditional chemical analysis by professional institutions is only performed in the case of problems because of the high cost.This lack of analysis prevents the timeous adjustment of the formula and seriously affects production efficiency.Therefore,a fast and simple detection method is needed to provide a basis for the control and adjustment of daily production.

    X-ray fluorescence (XRF) and laser-induced breakdown spectroscopy (LIBS) are recognized as spectral analysis technologies suitable for rapid detection[1–3].The advantage of XRF is nondestructive determination,but the detection ability of light elements is weak;the advantage of LIBS is the quick detection of almost all elements in the periodic table,but part of the sample surface will be ablated by the laser to create plasma during the detection.The building ceramics industry is mainly concerned with the chemical components,being concentrations of the eight oxides(SiO2,Al2O3,K2O,Na2O,CaO,MgO,Fe2O3and TiO2),together with L.O.I.There are light elements such as Na,Mg and Al,and L.O.I.is also largely determined by light elements such as C,H and O.On the other hand,the unit-price of ceramic raw material is low,and the destruction of samples during detection is not a concern.Therefore,LIBS is more suitable for the analysis of the main components of ceramic raw materials.

    There is an abundance of research on the applications of LIBS in energy[4],metallurgy[5,6],geographical survey[7]and extraterrestrial space exploration [8,9].Research on the element content and mineral composition of soil and rock using LIBS is also a hot field [10–14].LIBS-based analysis of ceramic raw materials(such as clay,feldspar and quartz)is usually qualitative analysis or quantitative analysis of one or several elements in samples from a specific origin or specific raw material types[15–20].Tang et al analyzed the content of K element in feldspar raw materials and improved the analysis accuracy by Lorentz fitting[18].Chen et al measured the content of Si,Al,Ca,K,Mg,Mn,Ti and Fe in drilling cutting samples by logging a special laser-induced breakdown spectrometer [20].Unified modeling and simultaneous quantitative analysis of the eight main oxides and L.O.I.in clay,feldspar,quartz and other types of minerals have rarely been reported in the literature.

    In this work,geological samples with wide variations in mineral composition were detected by the fiber-laser-based LIBS analyzer under the same experimental conditions,and the L.O.I.and concentrations of SiO2,Al2O3,K2O,Na2O,CaO,MgO,Fe2O3and TiO2in different kind of minerals were analyzed synchronously.The concentrations of these main elements in geological samples for building ceramics were simultaneously detected from the plasma emission induced by the long-pulsewidth and low-power fiber laser.The combination of continuous background deduction,FWHM intensity integral and spectral sum normalization was proposed to reduce the differences between sample matrices.Different calibration models were further proposed to improve the analysis performance of different compositions.The desktop LIBS analyzer integrated with the proposed methods provided a solution for daily rapid detection in the ceramics industry.

    2.Experiment

    2.1.Experimental instrument

    An experiment was performed on the self-developed desktop LIBS analyzer named LIBSeer.The design rendering,front view and system diagram of the instrument are shown in figures 1(a)–(c),respectively.The laser adopts the YDFLP-60-LM1+-L1-R(JPT Opto-electronics Co.,Ltd)pulse fiber laser,with maximum power of 60 W and single-pulse energy of about 1.5 mJ;the laser focusing lens is a flat convex lens with a focal length of 75 mm;the plasma emission collection lens is a flat convex lens with a focal length of 20 mm,and the collection angle is 30°lateral to the laser incident direction.Two spectrometers(AvaSpec-Mini4096CL,Avantes) are selected to cover the detection spectral wavelength ranges from 240–400 nm and 610–830 nm,respectively.

    2.2.Samples and data

    There were 16 national reference materials and 14 common ceramic raw materials used in the experiment.The pretreatment procedure of raw materials is:(1)taking a 500 g sample,wet ball milling it for half an hour;(2) drying it and sieving with a 60 mesh sieve;(3) taking about 20 g for chemical analysis,taking the rest of the powder for a LIBS experiment.The content of the oxides of the eight elements and the L.O.I.of each sample are shown in table 1 below.

    Table 1.Reference content of samples (%).

    The tablet-pressing parameters are: (1) 2 g sample powder for each tablet;(2) with boric acid substrate;(3) 4 and 3.2 cm for the outer diameter and inner diameter of the tablet,respectively;(4) pressing under the pressure of 30 T and keeping the pressure for 30 s.

    In order to satisfy the condition of full-power output of the fiber laser and obtain stable excitation and collection results,the laser parameters were optimized as follows: the pulse width of 250 ns,frequency of 40 kHz and duration of 150 μs;the delay and integration time of the spectrometers were optimized to 60 and 100 μs,respectively;and the detection frequency of the instrument is 10 Hz.For each detection,the spectrum collected by the spectrometer corresponded to the whole life cycle of plasma emissions excited by four laser pulses.Finally,there were 300 detections from different positions of each tablet,realized by the automatic rotation and translation of the electric control displacement table.The average spectrum of 300 detections is recorded as the original spectrum of the tablet sample.The pressed tablets of different samples and laser ablation craters after detection are shown in figure 2.

    The typical spectra collected are shown in figure 3.In the range of 240–400 nm and 610–830 nm,the characteristic spectral lines of Si,Al,K,Na,Ca,Mg,Fe and Ti are all included,and the characteristic spectral lines of other elements,such as H and O,which are related to L.O.I.,are also included.

    3.Results and discussion

    3.1.Spectral data preprocessing

    There were two tablets for each kind of sample listed in table 1.For each tablet,the experiment was repeated twice on different days with the same experimental parameters.Finally,there were four groups (two tablets,two experiments) of original spectral data for each kind of sample.Four plasma emissions were collected by the spectrometers in each detection to obtain sufficient spectral intensity,but due to the lack of time resolution,there was also strong continuous background radiation in the original spectrum.Therefore,the first data preprocessing was continuous background deduction.Furthermore,due to the self-absorption effect and the limited resolution of the module spectrometer,it may not be able to effectively capture the ideal peak intensity of the characteristic spectral line.Therefore,another data preprocessing method used was calculating the full width at half maximum (FWHM) to represent the characteristic spectral line intensity.

    3.2.Univariate calibration

    Figure 4 shows the correlation between the content and the intensity of the characteristic spectral line of each element.The error bar reflects the standard deviation of spectral intensity between the four experiments for each sample.Due to the different mineral compositions of ceramic raw materials,the spectral line intensity of each element was affected by the matrix effect and could not reflect the element content directly.

    Figure 1.(a) Design rendering of LIBSeer,(b) front view of LIBSeer and (c) structure diagram of the system.

    Figure 2.(a) Tablets of different materials,(b) side view of the tablet,(c) vertical view of the tablet and (d) the ablation craters under an electron microscope.

    Figure 3.Characteristic spectral lines of different elements in the range of (a) 240–400 nm and (b) 610–830 nm.

    Figure 4.Relationship between the spectral line intensity in the original spectrum and the content of the corresponding element.

    Figure 5.Relationship between the spectral line intensity after the spectral sum normalization and the content of the corresponding element.

    Figure 6.AEs of the 30 samples in the LOO validation of PLSR with(a)the 34 selected spectral lines and the average of the whole spectrum,(b) the whole spectrum.

    In order to reduce the influence of the matrix effect on the spectrum,it is necessary to select an appropriate reference value to normalize the original spectral line intensity.The content of each element in different ceramic raw materials varies widely.There is no suitable element to select the reference line for an internal standard.Spectral sum normalization is a feasible method,calculating the sum of the full spectrum detected by the spectrometer as the reference value.The average and relative standard deviation (RSD) values of the spectral sum of each sample in the four experiments are shown in table 2.It can be seen that either the spectral sums or the RSDs of different samples were quite different,due to differences in the plasma emission caused by different matrix compositions.

    Table 2.Spectral sums and RSDs of different kinds of samples.

    The calibration results of the content of each component listed in table 1 using normalized spectral intensity are shown in figure 5.It can be seen that,for most of the components,the correlation between the spectral line intensity and the content was significantly improved after spectral sum normalization.

    The characteristic spectral lines and corresponding correlation coefficients (R) selected for each component in figures 4 and 5 are shown in table 3.After spectral sum normalization,the correlation coefficients between all characteristic spectral lines and corresponding content are improved.Further analysis of the spectral lines after spectral sum normalization shows that: (1) L.O.I.includes the structural water discharged during 1000 °C ignition,CO2decomposed by carbonate,SO2decomposed by sulfate,and the loss of material after the thermal decomposition of organic matter.The characteristic spectral line of H can only represent the water content in the sample to some extent,but cannot represent the total L.O.I.Therefore,there was some correlation between L.O.I.and H line at 656.5 nm,but the desired calibration result could not be obtained.(2) As a major element in geological samples,Si exists in most pedogenic minerals in different forms.In a common building ceramics body formula,quartz is usually used as a ridge material,clay as ductile material and feldspar as flux.All these kinds of minerals contain Si.The characteristic line of Si is seriously affected by the matrix effect.Therefore,the correlation between SiO2content and Si line at 288.2 nm was weak.(3)As a major element in clay and feldspar,Al mainly exists in each sample in the form of aluminosilicate.Only part of Al in sample Nos.20,22 and 28 may exist in the form of alumina or hydrated alumina.Therefore,for different kinds of samples,the influence of the matrix effect on Al was more consistent than on Si.The correlation coefficient between the Al2O3content and Al line at 309.2 nm reached 0.96 after spectral sum normalization.(4) For K,Na,Ca and Mg,the main form that exists is aluminosilicate in ceramic raw materials,and the correlation coefficient between oxide content and spectral line is more than 0.97 after spectral sum normalization.(5) Most of the Fe and Ti directly exist in the form of oxides in the samples,so the influence of the matrix effect is relatively weak.The correlation coefficients reached 0.99 after spectral sum normalization.

    Table 3.Correlation coefficients (R) between characteristic spectral line intensity and concentration.

    Table 4.MAEs of 30 kinds of samples with different calibration methods.

    For comparison between the different calibration methods,the mean absolute errors (MAEs)of direct calibration of L.O.I.and the oxides are shown in table 4.For L.O.I.and most of the oxide content,calibration with the spectral sum normalized intensity can obtain better MAEs.

    In the building ceramic structure of SiO2-Al2O3-K2O(Na2O) the following applies: the production will not be affected if the absolute errors of CaO,MgO,Fe2O3and TiO2are less than 0.2%;the absolute error of K2O and Na2O should not exceed 0.5% for firing temperature control;the absolute errors of L.O.I.,SiO2and Al2O3should not exceed 2% for structure and shrinkage control.Therefore,(1) the direct calibration of CaO,MgO,Fe2O3and TiO2can meet the requirements of production control;(2) the direct calibration of K2O can meet the requirement of production control,but direct calibration of Na2O should be further improved;(3)it is not feasible to directly calibrate the L.O.I.,SiO2and Al2O3with spectral lines of H,Si and Al,respectively.Other methods should be used to further improve the prediction accuracy.

    3.3.Multivariate analysis

    The concentrations of L.O.I.,SiO2,Al2O3,K2O and Na2O are in a wide range in different kinds of ceramic raw materials.The direct calibration could not meet the production requirement.Therefore,more variables were added to build a multivariate model for the quantitative analysis of these compositions.

    3.3.1.Double-line analysis of K2O and Na2O.In order to avoid over-fitting caused by excess variables in multivariate analysis,few variables as possible should be selected.The correlation coefficient between the characteristic line intensity and oxide content reached 0.97 for K and Na,and the univariate calibration model could almost meet the requirement of production control.Therefore,only the characteristic lines of the same element with the oxide were selected for the multivariate analysis of K2O and Na2O.Spectral lines at 766.5 and 769.9 nm were selected for K,while spectral lines at 818.3 and 819.5 nm were selected for Na.The calibration model is described as,

    Table 5.Comparison results of K2O and Na2O with different calibration models.

    where X stands for K or Na,C stands for the content of the oxide,IX1and IX2stand for the spectral sum normalized intensities of the two selected spectral lines of K or Na,and a0–a4are the fitting coefficients.

    The comparison results of the content calibration of K and Na with different calibration models are shown in table 5.The determination coefficient(R2)and MAE values show that the double-line calibration of K and Na can obtain better results than the univariate calibration with either of the spectral lines alone,and the analysis accuracy can meet the requirement of the building ceramic production control.

    3.3.2.Multivariate analysis of L.O.I.,SiO2and Al2O3.It can be seen from table 4 that for L.O.I.,SiO2and Al2O3,the accuracy of univariate analysis should be further improved to meet the production control requirement.The multivariate analysis model is described as,

    where C stands for the content of SiO2,Al2O3or L.O.I.,Ikstands for the spectral sum normalized intensity of the kth selected spectral line,n is the number of the selected spectral lines,and a0–a2nare the fitting coefficients.The R2and MAE of different combinations of spectral lines are shown in table 6.It can be seen that because the interaction among L.O.I.,SiO2and Al2O3was considered to some extent,the combination of the spectral lines of H,Si,Al and the average of the whole spectrum can obtain the best R2and MAE for SiO2and Al2O3,and adding the spectral line of O can improve the R2of L.O.I.slightly.

    Table 6.Comparison results of multivariate regression with different spectral line combinations.

    Table 7.Spectral lines selected for PLSR.

    Partial least squares regression (PLSR) was further introduced to build the multivariate model with more spectral lines.There are 34 lines listed in table 7,which were used as the input of PLSR.Furthermore,the whole spectrum was also used as the input of PLSR as a comparison.

    The leave-one-out (LOO) validation results of different methods are shown in table 8.It can be seen that(1)the PLS model with the 35 selected spectral intensities can obtain better R2and MAE than the model with the whole spectrum for SiO2and Al2O3;(2)the PLS model with either the whole spectrum or the 35 selected spectral intensities cannot obtain better R2and MAE than the multiple regression described above.The specific absolute errors (AEs) of the 30 samples with the PLSR are shown in figure 6,to further analyze the poor performance of PLS in the experiment.It can be seen that there are some samples with AE larger than 5%and even larger than 10%.Analyzing each sample specifically,the main reasons for the large AEs of the samples may be that(1)there are no samples with a similar matrix in the training set of LOO validation (e.g.samples 22 and 28 are calcined bauxite and calcined flint clay,respectively,and there are no other similar calcined bauxite and flint clay samples in the 30 samples);(2) the content of the component cannot be well expressed by the selected lines(e.g.the L.O.I.of sample ten is 17.31%,whereas the concentration of the structural water is only 13.24%and the concentration of SO3is 5.51%,but there are no S lines in the whole spectrum in the experiment).In conclusion,under the complex sample matrix and limited sample types of ceramic raw materials,more variable dimensions do not always lead to better analysis results.

    Table 8.LOO validation results of multiple regression and PLSR.

    4.Conclusion

    In this paper,we introduced the quantitative analysis of SiO2,Al2O3,K2O,Na2O,CaO,MgO,Fe2O3,TiO2and L.O.I.with the atomic emission spectrum induced by a fiber-laser-based LIBS analyzer.Different data processing and analysis methods were discussed to meet the production control requirement.With the combination of continuous background deduction,FWHM intensity integral and spectral sum normalization,the MAEs of univariate calibration were reduced to below 0.2%for CaO,MgO,Fe2O3and TiO2,which can meet the production control requirement.Furthermore,using the double-line analysis model of K and Na,the MAEs of K2O and Na2O were reduced to below 0.5%,meeting the production control requirement.Multiple regression and PLSR were further introduced for the analysis of SiO2,Al2O3and L.O.I.The optimized analysis model reduced the MAEs of SiO2,Al2O3and L.O.I.to 2.07%,1.38% and 1.12%,respectively.It is proved that the use of the fiber-laser-based desktop LIBS analyzer is feasible for the quantitative analysis of the main inorganic elements in geological samples.However,due to the complex sample matrix effect and the limited kinds of experimental samples,complex multivariate analysis did not effectively improve the prediction accuracy.In future work,with the increase in the number of modeling samples,it is expected that there will be further improvement in the analysis accuracy of the instrument through the use of complex multivariable analysis algorithms.This will lead to an expansion of application fields.

    Acknowledgments

    This work is supported by National Natural Science Foundation of China (No.62173321),the Key Research Program of Frontier Sciences,CAS (No.QYZDJ-SSW-JSC037),the Science and Technology Service Network Initiative Program,CAS (No.KFJ-STS-QYZD-2021-19-002),the Liaoning Provincial Natural Science Foundation (No.2021-BS-022)and the Youth Innovation Promotion Association,CAS.

    猜你喜歡
    張鵬
    探究圓錐曲線中的存在性問題
    Competitive effect between roughness and mask pattern on charging phenomena during plasma etching
    張鵬、文靜伉儷的內畫情緣
    金橋(2022年1期)2022-02-12 01:37:18
    一個噴嚏
    Microanalysis of a ductile iron by microchip laser-induced breakdown spectroscopy
    基于PLC控制的平移式自動門設計
    A feature selection method combined with ridge regression and recursive feature elimination in quantitative analysis of laser induced breakdown spectroscopy
    理發風波
    帕布巴升座慶典在芒市舉行
    今日民族(2017年4期)2017-05-13 06:28:03
    張鵬產品設計作品
    h视频一区二区三区| 国产黄色视频一区二区在线观看| 亚洲五月色婷婷综合| a级毛色黄片| 王馨瑶露胸无遮挡在线观看| 啦啦啦视频在线资源免费观看| 男女国产视频网站| xxx大片免费视频| 国产精品免费大片| 在线观看国产h片| 国产精品一区二区在线不卡| 天美传媒精品一区二区| 成人18禁高潮啪啪吃奶动态图| 国产精品女同一区二区软件| 国产精品女同一区二区软件| 欧美日韩国产mv在线观看视频| 国产老妇伦熟女老妇高清| 黄网站色视频无遮挡免费观看| 狠狠精品人妻久久久久久综合| 尾随美女入室| 午夜av观看不卡| av天堂久久9| 97精品久久久久久久久久精品| 男人添女人高潮全过程视频| 母亲3免费完整高清在线观看 | 交换朋友夫妻互换小说| 国产激情久久老熟女| 我要看黄色一级片免费的| 久久精品国产鲁丝片午夜精品| 在线天堂中文资源库| 国产精品成人在线| 欧美日韩视频高清一区二区三区二| 一二三四在线观看免费中文在 | 亚洲国产av影院在线观看| 久久影院123| 少妇 在线观看| 一区二区日韩欧美中文字幕 | 精品国产国语对白av| 亚洲精品国产av蜜桃| 不卡视频在线观看欧美| 又大又黄又爽视频免费| 一区二区三区四区激情视频| 亚洲av在线观看美女高潮| 国产成人精品福利久久| 免费播放大片免费观看视频在线观看| 午夜老司机福利剧场| av线在线观看网站| 国产高清不卡午夜福利| 日韩大片免费观看网站| 精品久久久精品久久久| 国产色爽女视频免费观看| 国产av精品麻豆| 精品一区二区三区四区五区乱码 | 国产成人一区二区在线| 99热国产这里只有精品6| 最近中文字幕高清免费大全6| 妹子高潮喷水视频| 久久精品人人爽人人爽视色| 26uuu在线亚洲综合色| 久久99热这里只频精品6学生| 韩国高清视频一区二区三区| 深夜精品福利| 日韩精品有码人妻一区| 中文字幕精品免费在线观看视频 | 制服人妻中文乱码| 免费看av在线观看网站| 国产一区二区三区综合在线观看 | 国产亚洲av片在线观看秒播厂| 老司机影院毛片| av片东京热男人的天堂| 国产精品嫩草影院av在线观看| 午夜影院在线不卡| 男女啪啪激烈高潮av片| 黄片播放在线免费| 男人舔女人的私密视频| 国产av精品麻豆| 18禁裸乳无遮挡动漫免费视频| 国产在视频线精品| 久久狼人影院| 午夜日本视频在线| 国产亚洲最大av| 国产日韩欧美视频二区| 免费看光身美女| 日本午夜av视频| 亚洲色图综合在线观看| 91成人精品电影| 国产免费福利视频在线观看| 免费av中文字幕在线| 亚洲精品成人av观看孕妇| 午夜免费男女啪啪视频观看| 国产精品成人在线| videossex国产| 精品亚洲成国产av| 美女大奶头黄色视频| 九色成人免费人妻av| a 毛片基地| 另类亚洲欧美激情| 99香蕉大伊视频| 91精品伊人久久大香线蕉| 欧美成人午夜免费资源| 99精国产麻豆久久婷婷| 国产精品免费大片| 欧美成人精品欧美一级黄| 女人久久www免费人成看片| 极品人妻少妇av视频| 最后的刺客免费高清国语| 一级爰片在线观看| 边亲边吃奶的免费视频| 人人澡人人妻人| 香蕉精品网在线| 看十八女毛片水多多多| 国产精品三级大全| 精品99又大又爽又粗少妇毛片| 亚洲成色77777| 一级毛片 在线播放| 久久国产亚洲av麻豆专区| 国产精品蜜桃在线观看| 免费高清在线观看日韩| 少妇的逼好多水| 欧美xxxx性猛交bbbb| 久久亚洲国产成人精品v| 五月伊人婷婷丁香| 国产在视频线精品| 中国美白少妇内射xxxbb| 日本色播在线视频| 精品久久久精品久久久| 97超碰精品成人国产| av播播在线观看一区| 国产1区2区3区精品| 伊人久久国产一区二区| 亚洲一区二区三区欧美精品| 精品卡一卡二卡四卡免费| 男女午夜视频在线观看 | 国产日韩欧美视频二区| 久久久国产精品麻豆| 国产成人免费观看mmmm| 亚洲欧美日韩另类电影网站| 看十八女毛片水多多多| 男女边吃奶边做爰视频| 女的被弄到高潮叫床怎么办| 肉色欧美久久久久久久蜜桃| 国产精品女同一区二区软件| 涩涩av久久男人的天堂| 欧美日韩成人在线一区二区| 午夜福利影视在线免费观看| 久久亚洲国产成人精品v| av福利片在线| 丝袜脚勾引网站| 深夜精品福利| 亚洲国产欧美在线一区| 久久久久久久大尺度免费视频| 亚洲人成77777在线视频| av又黄又爽大尺度在线免费看| 亚洲人与动物交配视频| 免费高清在线观看日韩| 国产亚洲午夜精品一区二区久久| 国产无遮挡羞羞视频在线观看| 精品酒店卫生间| 日韩中文字幕视频在线看片| 欧美亚洲日本最大视频资源| 狠狠婷婷综合久久久久久88av| 精品久久国产蜜桃| 久久久久久人妻| 成人毛片60女人毛片免费| 久久影院123| 丝瓜视频免费看黄片| 久久99一区二区三区| 亚洲国产精品一区三区| 久久精品国产鲁丝片午夜精品| 天天操日日干夜夜撸| 9色porny在线观看| 国产一区有黄有色的免费视频| 日韩一本色道免费dvd| 国产av国产精品国产| 午夜影院在线不卡| 免费在线观看黄色视频的| 中文字幕精品免费在线观看视频 | 精品少妇内射三级| 秋霞伦理黄片| 日韩制服骚丝袜av| 丝袜脚勾引网站| 在线天堂中文资源库| 国产一区亚洲一区在线观看| 黄色 视频免费看| 日本免费在线观看一区| 亚洲色图综合在线观看| 国产av一区二区精品久久| 国产熟女午夜一区二区三区| 丝袜脚勾引网站| 看免费成人av毛片| 国产欧美另类精品又又久久亚洲欧美| 三上悠亚av全集在线观看| 中文字幕另类日韩欧美亚洲嫩草| 精品一区在线观看国产| 久久久a久久爽久久v久久| 欧美日韩成人在线一区二区| 午夜福利影视在线免费观看| 免费看光身美女| 日韩三级伦理在线观看| 内地一区二区视频在线| 免费高清在线观看视频在线观看| 2021少妇久久久久久久久久久| 亚洲欧美成人精品一区二区| 亚洲av福利一区| 亚洲精品456在线播放app| 天堂中文最新版在线下载| 久久人人爽av亚洲精品天堂| 青春草视频在线免费观看| av免费观看日本| 99久国产av精品国产电影| 99re6热这里在线精品视频| 国产精品人妻久久久影院| 欧美亚洲日本最大视频资源| 午夜日本视频在线| 欧美国产精品va在线观看不卡| 尾随美女入室| 一级a做视频免费观看| 男人舔女人的私密视频| 亚洲精品,欧美精品| 精品久久久精品久久久| 岛国毛片在线播放| 欧美精品av麻豆av| 久久国产精品男人的天堂亚洲 | 亚洲国产毛片av蜜桃av| 久久人妻熟女aⅴ| 亚洲伊人久久精品综合| 日韩欧美精品免费久久| 午夜影院在线不卡| 一区二区av电影网| 国产69精品久久久久777片| 中文字幕另类日韩欧美亚洲嫩草| 日本爱情动作片www.在线观看| 精品国产一区二区三区四区第35| 极品人妻少妇av视频| 三级国产精品片| 九九在线视频观看精品| 国产成人av激情在线播放| 又黄又爽又刺激的免费视频.| 男人操女人黄网站| 免费黄色在线免费观看| 午夜福利网站1000一区二区三区| 国产免费视频播放在线视频| 国产精品不卡视频一区二区| 2018国产大陆天天弄谢| 99久久人妻综合| 欧美日韩成人在线一区二区| 国产成人aa在线观看| 波野结衣二区三区在线| 亚洲国产精品一区三区| 赤兔流量卡办理| 精品一区二区免费观看| 人妻系列 视频| 成年美女黄网站色视频大全免费| 久久国产亚洲av麻豆专区| 久久久欧美国产精品| 亚洲成国产人片在线观看| 晚上一个人看的免费电影| 日韩一本色道免费dvd| 精品久久久精品久久久| 亚洲经典国产精华液单| 久久人人爽av亚洲精品天堂| 国产不卡av网站在线观看| 亚洲av.av天堂| 久久久精品区二区三区| 18在线观看网站| 一本大道久久a久久精品| 国产在线视频一区二区| 国产精品三级大全| 久久狼人影院| 777米奇影视久久| 免费黄网站久久成人精品| 欧美日韩成人在线一区二区| 97精品久久久久久久久久精品| 香蕉丝袜av| 一二三四中文在线观看免费高清| 91精品三级在线观看| 成人影院久久| 日韩欧美一区视频在线观看| 少妇的逼好多水| 涩涩av久久男人的天堂| 日韩中字成人| 如何舔出高潮| 成人黄色视频免费在线看| 男人爽女人下面视频在线观看| 免费av不卡在线播放| 在线观看美女被高潮喷水网站| 人妻 亚洲 视频| 桃花免费在线播放| 黑人巨大精品欧美一区二区蜜桃 | 国产精品久久久久久精品古装| 天天操日日干夜夜撸| 午夜福利影视在线免费观看| 人体艺术视频欧美日本| 99九九在线精品视频| 久久鲁丝午夜福利片| 青春草亚洲视频在线观看| 国产色婷婷99| 国产精品人妻久久久影院| 乱人伦中国视频| 婷婷色综合大香蕉| 黄色 视频免费看| 18在线观看网站| 美女国产高潮福利片在线看| 精品国产露脸久久av麻豆| 啦啦啦视频在线资源免费观看| 尾随美女入室| 丰满乱子伦码专区| 在线观看免费视频网站a站| 成人国产av品久久久| 亚洲色图综合在线观看| 免费看光身美女| 亚洲av电影在线观看一区二区三区| 在线观看一区二区三区激情| 国产精品国产三级国产av玫瑰| 欧美成人精品欧美一级黄| 亚洲精品,欧美精品| 亚洲欧美一区二区三区国产| 男女啪啪激烈高潮av片| 在线免费观看不下载黄p国产| 国产免费福利视频在线观看| 色婷婷久久久亚洲欧美| 天堂中文最新版在线下载| 成人无遮挡网站| 大香蕉久久网| 美女福利国产在线| 国产一区二区激情短视频 | 香蕉精品网在线| 大香蕉久久成人网| 欧美3d第一页| 国产精品无大码| 亚洲精品成人av观看孕妇| 成人毛片a级毛片在线播放| 国产在视频线精品| 天堂中文最新版在线下载| 成人无遮挡网站| 90打野战视频偷拍视频| 99久久综合免费| 国产白丝娇喘喷水9色精品| 午夜免费鲁丝| 日韩,欧美,国产一区二区三区| 亚洲情色 制服丝袜| 国产成人午夜福利电影在线观看| 男女国产视频网站| 宅男免费午夜| 视频中文字幕在线观看| 亚洲国产日韩一区二区| 亚洲色图综合在线观看| 成人免费观看视频高清| 丝袜美足系列| 久久国产精品大桥未久av| 精品少妇内射三级| 人体艺术视频欧美日本| 欧美 亚洲 国产 日韩一| 久久国产精品大桥未久av| 99久久综合免费| 女性生殖器流出的白浆| 王馨瑶露胸无遮挡在线观看| 国产熟女欧美一区二区| 高清欧美精品videossex| 香蕉丝袜av| 婷婷色综合www| 欧美日韩一区二区视频在线观看视频在线| 国内精品宾馆在线| 国产免费一级a男人的天堂| 免费日韩欧美在线观看| 成人毛片60女人毛片免费| 五月天丁香电影| 在线看a的网站| 五月天丁香电影| 久久99一区二区三区| 女性被躁到高潮视频| 久久人妻熟女aⅴ| 99久国产av精品国产电影| 制服丝袜香蕉在线| 黄色视频在线播放观看不卡| 男女啪啪激烈高潮av片| 久久久精品区二区三区| 99香蕉大伊视频| 午夜精品国产一区二区电影| 亚洲欧洲国产日韩| 亚洲少妇的诱惑av| 在线观看三级黄色| 国产av一区二区精品久久| www.熟女人妻精品国产 | 嫩草影院入口| 日本免费在线观看一区| 男人爽女人下面视频在线观看| 天天操日日干夜夜撸| 国产精品一区www在线观看| 国产精品 国内视频| 国产精品一区www在线观看| 日韩一本色道免费dvd| 侵犯人妻中文字幕一二三四区| 一级,二级,三级黄色视频| 亚洲精品成人av观看孕妇| 欧美日韩成人在线一区二区| 欧美 日韩 精品 国产| 国产欧美日韩综合在线一区二区| 久久精品国产a三级三级三级| www.色视频.com| 久久久国产欧美日韩av| 亚洲内射少妇av| h视频一区二区三区| 国国产精品蜜臀av免费| 伦精品一区二区三区| 亚洲 欧美一区二区三区| 少妇高潮的动态图| 精品久久久精品久久久| 纵有疾风起免费观看全集完整版| 亚洲五月色婷婷综合| 91国产中文字幕| 国产成人欧美| 日韩制服骚丝袜av| 国产免费又黄又爽又色| www.熟女人妻精品国产 | videossex国产| 日本免费在线观看一区| 水蜜桃什么品种好| 日本av免费视频播放| 18禁动态无遮挡网站| 最新中文字幕久久久久| 亚洲国产毛片av蜜桃av| 精品一区在线观看国产| 欧美日本中文国产一区发布| 午夜老司机福利剧场| 亚洲欧美一区二区三区黑人 | 亚洲人成网站在线观看播放| 观看美女的网站| www.av在线官网国产| 久久久久人妻精品一区果冻| 涩涩av久久男人的天堂| 日本午夜av视频| 综合色丁香网| 亚洲精品国产av蜜桃| 精品一区二区三区四区五区乱码 | 成年人免费黄色播放视频| 亚洲精品av麻豆狂野| 国产高清不卡午夜福利| 国产精品久久久久久精品电影小说| 1024视频免费在线观看| 国产精品蜜桃在线观看| 成人国产av品久久久| 欧美丝袜亚洲另类| 久久这里只有精品19| 国产精品麻豆人妻色哟哟久久| 亚洲综合色网址| 成人午夜精彩视频在线观看| 天堂8中文在线网| 黄色配什么色好看| 人妻人人澡人人爽人人| 成人毛片a级毛片在线播放| 一二三四中文在线观看免费高清| 99re6热这里在线精品视频| 在线观看免费高清a一片| 中文字幕另类日韩欧美亚洲嫩草| 亚洲人与动物交配视频| 观看av在线不卡| 国产乱人偷精品视频| 女人精品久久久久毛片| 国产av一区二区精品久久| 天堂8中文在线网| 亚洲成色77777| 免费日韩欧美在线观看| 人成视频在线观看免费观看| 天堂俺去俺来也www色官网| 欧美日韩精品成人综合77777| 日日啪夜夜爽| 色哟哟·www| 国产伦理片在线播放av一区| 丝袜美足系列| 欧美精品人与动牲交sv欧美| 国产成人欧美| 免费不卡的大黄色大毛片视频在线观看| 青春草视频在线免费观看| 亚洲国产精品一区三区| 老司机影院毛片| 国产精品久久久久久精品电影小说| 超色免费av| 精品99又大又爽又粗少妇毛片| 亚洲精品色激情综合| 国产成人午夜福利电影在线观看| 国产免费视频播放在线视频| 成人毛片60女人毛片免费| 性色av一级| 观看av在线不卡| 国产色爽女视频免费观看| av一本久久久久| 国产欧美亚洲国产| 免费日韩欧美在线观看| 91aial.com中文字幕在线观看| 伊人久久国产一区二区| 男女国产视频网站| 成人免费观看视频高清| 下体分泌物呈黄色| 亚洲天堂av无毛| 国产色爽女视频免费观看| 狂野欧美激情性xxxx在线观看| av有码第一页| 国产精品久久久久久精品电影小说| 香蕉国产在线看| 亚洲国产精品国产精品| 国产精品三级大全| 少妇高潮的动态图| 成年人午夜在线观看视频| 国产一区二区三区av在线| videos熟女内射| 伦理电影免费视频| 成人亚洲精品一区在线观看| 国产片特级美女逼逼视频| 日本与韩国留学比较| av黄色大香蕉| 亚洲欧洲精品一区二区精品久久久 | 成人国产麻豆网| 男人添女人高潮全过程视频| 久久精品久久精品一区二区三区| 寂寞人妻少妇视频99o| 超碰97精品在线观看| 亚洲一级一片aⅴ在线观看| 亚洲精品一二三| 久久午夜福利片| 交换朋友夫妻互换小说| 亚洲国产成人一精品久久久| 在线观看三级黄色| 日韩,欧美,国产一区二区三区| 99久国产av精品国产电影| 欧美精品一区二区免费开放| 91成人精品电影| 亚洲av电影在线观看一区二区三区| 夫妻性生交免费视频一级片| 欧美xxxx性猛交bbbb| 日韩不卡一区二区三区视频在线| 久久久精品免费免费高清| 亚洲,一卡二卡三卡| 在线看a的网站| 久热久热在线精品观看| 777米奇影视久久| 精品人妻熟女毛片av久久网站| 欧美 亚洲 国产 日韩一| 日本av免费视频播放| 亚洲欧美色中文字幕在线| 视频中文字幕在线观看| 男女免费视频国产| 丝袜在线中文字幕| 午夜激情久久久久久久| 亚洲精品美女久久av网站| 咕卡用的链子| 制服丝袜香蕉在线| 国产精品99久久99久久久不卡 | tube8黄色片| 国产男女内射视频| 国产又色又爽无遮挡免| 91在线精品国自产拍蜜月| 免费高清在线观看日韩| 亚洲精品日本国产第一区| 1024视频免费在线观看| 亚洲国产欧美日韩在线播放| 色婷婷av一区二区三区视频| 男女无遮挡免费网站观看| 在线观看国产h片| 亚洲精品美女久久av网站| 国产成人a∨麻豆精品| 国产av精品麻豆| 国产片特级美女逼逼视频| 汤姆久久久久久久影院中文字幕| 国产无遮挡羞羞视频在线观看| 精品国产乱码久久久久久小说| 高清毛片免费看| 我的女老师完整版在线观看| 国产亚洲av片在线观看秒播厂| 国产亚洲欧美精品永久| 亚洲精品一二三| 国精品久久久久久国模美| 亚洲成色77777| 国产精品熟女久久久久浪| 男女边摸边吃奶| 亚洲精品中文字幕在线视频| 免费在线观看黄色视频的| 亚洲伊人色综图| 一边亲一边摸免费视频| 亚洲,欧美精品.| 久久国产亚洲av麻豆专区| 美女脱内裤让男人舔精品视频| 大香蕉97超碰在线| av网站免费在线观看视频| 秋霞在线观看毛片| 观看av在线不卡| 男女午夜视频在线观看 | 一级爰片在线观看| 搡老乐熟女国产| 日本黄色日本黄色录像| 91精品伊人久久大香线蕉| 亚洲欧美精品自产自拍| 侵犯人妻中文字幕一二三四区| 亚洲天堂av无毛| 极品少妇高潮喷水抽搐| 国产精品免费大片| 久久精品国产亚洲av涩爱| 亚洲,一卡二卡三卡| 国产精品久久久久久久电影| 51国产日韩欧美| 看非洲黑人一级黄片| 一个人免费看片子| 久久人人爽av亚洲精品天堂| 边亲边吃奶的免费视频| 伊人久久国产一区二区| 天美传媒精品一区二区| 久久免费观看电影| 少妇精品久久久久久久| 91精品国产国语对白视频| 这个男人来自地球电影免费观看 | 丝瓜视频免费看黄片| 人人澡人人妻人| 国产精品 国内视频| 免费黄频网站在线观看国产| 免费观看性生交大片5|