• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Effects of O2 addition on the plasma uniformity and reactivity of Ar DBD excited by ns pulsed and AC power supplies

    2022-06-01 07:55:32FengLIU劉峰YueZHUANG莊越YuleiZHAO趙昱雷JieCHEN陳潔andZhiFANG方志
    Plasma Science and Technology 2022年5期
    關鍵詞:陳潔劉峰方志

    Feng LIU(劉峰),Yue ZHUANG(莊越),Yulei ZHAO(趙昱雷),Jie CHEN(陳潔)and Zhi FANG (方志)

    College of Electrical Engineering and Control Science,Nanjing Tech University,Nanjing 211816,People’s Republic of China

    Abstract Dielectric barrier discharges(DBDs)have been widely used in ozone synthesis,materials surface treatment, and plasma medicine for their advantages of uniform discharge and high plasmachemical reactivity.To improve the reactivity of DBDs, in this work, the O2 is added into Ar nanosecond (ns) pulsed and AC DBDs.The uniformity and discharge characteristics of Ar ns pulsed and AC DBDs with different O2 contents are investigated with optical and electrical diagnosis methods.The DBD uniformity is quantitatively analyzed by gray value standard deviation method.The electrical parameters are extracted from voltage and current waveforms separation to characterize the discharge processes and calculate electron density ne.The optical emission spectroscopy is measured to show the plasma reactivity and calculate the trend of electron temperature Te with the ratio of two emission lines.It is found that the ns pulsed DBD has a much better uniformity than AC DBD for the fast rising and falling time.With the addition of O2,the uniformity of ns pulsed DBD gets worse for the space electric field distortion by which promotes the filamentary formation.While, in AC DBD, the added O2 can reduce the intensity of filaments,which enhances the discharge uniformity.The ns pulsed DBD has a much higher instantaneous power and energy efficiency than AC DBD.The ratio of Ar emission intensities indicates that the Te drops quickly with the addition of O2 both ns pulsed and AC DBDs and the ns pulsed DBD has an obvious higher Te and ne than AC DBD.The results are helpful for the realization of the reactive and uniform low temperature plasma sources.

    Keywords: nanosecond pulse power supply, dielectric barrier discharge, discharge uniformity,oxygen addition

    1.Introduction

    Dielectric barrier discharge(DBD)can produce large area low temperature plasma at a large variety of conditions (gas pressure, electrode structure, and power supply parameter)[1-3], which makes it widely used in air pollution control[4, 5], material surface treatment [6-8], plasma biomedicine[9] and energy conversion.One of the advantages of DBD is that the dielectric layer between the electrodes can prevent the increase of the discharge current into arc and keep the discharge under uniformity in atmospheric pressure [3, 10].But at atmospheric pressure, especially with the addition of admixture to improve plasma-chemical reactivity, the uniformity of DBDs is still not satisfied for many applications because usually there are a lot of short-live conductive microdischarge filaments existing in DBDs [11].With most of the energy and active species restricted into the filaments, there are low energy efficiency, uneven treatment, and local overheating problems in the DBDs in the filamentary discharge mode.

    Traditionally,DBDs are excited by AC power supplies,and recently, with the development of pulse power technology, the application of nanosecond (ns) pulse power supply in the excitation in DBDs becomes one of important methods to improve the discharge uniformity.It is because the short discharge duration can further limit the formation of filaments and prevent the streamer-to-spark transition.Besides the improvement of the discharge uniformity,the energy efficiency of the pulsed DBDs can be improved compared with AC DBDs because more energy goes into energetic electrons production other than gas heating [12-15].The high reduced electric field E/n caused by the high voltage slew rate and the high density chemical species produced by energetic electrons would enhance the plasmachemical efficiency.Therefore, the investigations of the discharge characteristics and applications of the pulsed DBDs attract much attention to improve discharge uniformity, energy efficient,plasma activity,and treatment effects[16].Walsh et al compared the efficiency of pulse and high frequency excited Ar DBDs and concluded that the electron density and atomic oxygen content in pulsed plasma were 3.9 and 3.3 times higher than those excited by high frequency, respectively [17].Jiang and Yang et al respectively studied and compared the optical images of AC and pulsed DBDs under different conditions[18,19].Wang et al investigated the discharge characteristics of AC and ns pulsed coaxial DBDs and found that the outside wall temperature of the AC coaxial DBD reached 158 °C and was much higher than that of the ns pulsed DBD at 64.3 °C after 900 s operation [20].Zhang et al studied the regime transitions between streamer discharge, diffuse discharge, and surface discharge in ns pulsed DBD using high resolution temporal-spatial spectra and instantaneous exposure images[21].Yu et al studied the ns pulsed DBD temporally resolved evolution by ICCD images [22].

    Meanwhile, the amounts and kinds of the active species in plasmas are also critical important in many applications because those species participate physicochemical processes[23].Usually, to improve the uniformity of atmospheric DBDs, the discharges need operate in inert gases, such as Ar and He,and there is lack of active and functional radicals for plasma-chemical processing.One of the solutions is the addition of additives (such as O2, H2O, CF4) to produce reactive species(such as O,OH,H,NO,HO2,O3,F)[24-26].Among of those additives, O2plays a crucial role because it can produce oxidative radicals, such as O and O3, which are important in thin film deposition and etching, VOCs oxidation, and biomedical treatment applications.Fang et al used Ar DBD for PET film surface hydrophilic modification and found that appropriate amount of oxygen addition(0.3%)can enhance the treatment effect [27].Weng et al inactivated bacteria with radio-frequency Ar DBD and found the optimum of inactivation of E.coli treatment effect at the addition of 0.5% oxygen and 30 s exposure time [28].Hicks et al studied the process optimization of Ar/O2/CF4plasma treatment of diamond substrate smoothing and the effect of removing subsurface polishing damage [29].

    However, the added oxygen would affect the plasma properties more complicated.A proper amount of oxygen admixture could increase the discharge by Penning effect with metastable molecules of inert gases.However,with excessive oxygen addition, it will reduce the electron density by formingand quench the metastable molecules, which exacerbate the distortion of the electric field distribution and the non-uniformity of discharge.For the purpose of realizing uniform and reactive oxygen containing DBD plasma sources, the understanding of the discharge phenomena is very important, which reveals the effect of O2in the plasma processing.

    Considering the widely use of AC and pulsed power supplies in the excitation of DBDs,in this work,the effects of oxygen addition on the characteristics of ns pulsed DBD and AC DBD are compared and quantitative analyzed.The measured voltage and current waveforms are separated to reveal the ignition and extinction of the discharge processes, and to estimate ne.The tendency of Teunder different O2contents is derived from the two emission lines by optical emission spectroscopy (OES) measurement.

    2.Experimental setup

    Figure 1 shows the experimental setup, which includes a discharge reactor, electrical and optical measurement systems, gas supply system, and AC and ns pulse power supplies.The stainless steel reactor can be vacuumed with a rotary pump.A pair of 50 mm diameter parallel plates is used as electrodes, and an 80 mm diameter 2 mm thick quartz glass is used as dielectric barrier.The gas gap between electrode plates is fixed at 2 mm.The voltage range of the AC power supply is 0-30 kV and frequency is from 1 Hz to 15 kHz.The ns pulse power supply can provide 0-15 kV peak pulse high voltage and 1 Hz to 100 kHz pulse repetition frequency.The rising and falling times,pulse width of the pulse voltage are in the ranges of 50 ns to 500 ns, and 0-5000 ns, respectively.In the experiment, the frequencies of both the power supplies are fixed at 10 kHz,and the rising and falling times are fixed at 50 ns, which can produce discharges on the rising and falling edges.The pulse width of the pulse voltage is fixed at 800 ns for a better discharge uniformity and stability.

    Figure 1.The schematic of the DBD experimental setup.

    The electrical measurement system is composed of a digital oscilloscope (Tektronix 3054), a high voltage probe(North Star PVM-5)and a current coil(Pearson Electronics Inc.2877) for the voltage-current measurement from the power supplies,and a differential probe(LDP-6002)for the voltage measurement on a 2.2 nF measuring capacitor (Cr)for electrical parameters calculation.A Canon EOS 6D camera is used to record the discharge image with 1/6 s exposure time.The OES is measured by an Ocean Optic HR4000CG spectrometer (0.7 nm resolution).The purity Ar and O2are used as discharge gases and a bottle of mixture gas of Ar/O2with 1% O2is used when the O2content is below 1% for the purpose of precise ratio control.

    3.Results and discussion

    3.1.Discharge uniformity of argon DBD

    Figure 2 shows the optical images of the AC and ns pulsed Ar DBDs, respectively.It can be seen that the AC DBDs are in filamentary mode with the applied voltage from 2.4 to 3.6 kV.At a lower voltage,2.4 kV,the discharge cannot be full of the space between the electrodes and just with isolated filaments.With 3.2-3.6 kV applied voltage, the discharge occupies all of space but is still in filamentary mode.Similarly, the Ar DBD excited by the ns pulsed power supply shows isolated filaments in the discharge space at a lower voltage, 3.3 kV.With the increasing of the applied voltage,the plasma fills in the whole discharge space without obvious filaments at 3.6 kV.The Ar DBD excited by ns pulsed power supply is more uniform, which is due to the short rise time of pulse voltage, thus terminating the transition from Townsend glow discharge to serious filamentous phase.However, as the applied voltage further increases to 4.4 kV, filaments appear in the discharge due to high voltage.

    Figure 2.The discharge images of DBD excited by AC (a) and ns pulse (b) power supplies.

    The experimental results show that the applied voltage range of ns pulse Ar DBD is larger than that of AC,which is due to the over-voltage breakdown of pulse discharge,and the gas needs higher voltage to be ionized.From figure 2, when the voltage of AC is 2.4 kV,several clear and countable weak filaments are generated locally in the discharge space.With the increase of the applied voltage to 3.6 kV,the electric field intensity increases, the collision ionization increases, and the electron avalanche intensifies, resulting in the discharge filament filling the whole space,the discharge intensity increases,and the discharge is still uneven.When the applied voltage of ns pulse is 3.3 kV,the discharge does not fill the whole space as AC DBD when the voltage is 2.4 kV.While, except the filaments,more diffuse plasma fills the gap in ns pulsed DBD than AC DBD.With the applied voltage increasing, the filament gradually fills the whole space and fuses in the ns pulsed DBD.When the applied voltage reaches 3.6 kV, it is hard to observe the filament in the ns pulsed DBD,and the discharge is with good uniformity.With 4.4 kV applied voltage of ns pulsed DBD, a few bright streamers are generated in the space, and the discharge uniformity of ns pulsed DBD decreases.

    Figure 3.The discharge gap voltage separation waveforms of AC DBD(a)and ns pulsed DBD(c),and the current separation waveforms of AC DBD (b) and ns pulsed DBD (d).

    Although the discharge images can be qualitatively judged by eye,it is impossible to quantitatively get the value of the discharge uniformity.To quantitatively analyze the discharge uniformity, some researchers have developed different image processing methods based on fast Fourier transform, spatial correlation function, and gray level histogram[30-32].In our previous research,we have developed a method of gray value standard deviation (GVSD) to quantitatively analyze the discharge uniformity from the optical images [33].The pixel gray values of discharge area can be obtained with graying processing, and the gray values xnof the middle horizontal line of the discharge area are averaged to get the averaged gray value xm.Then,the normalized valuecan be obtained:

    where v is the variance of pixel value.Then, the gradient value ofcan be obtained with differentiation processing,which is the value of GVSD and can be used to indicate the uniformity of discharge.

    With the above GVSD method for discharge uniformity,the GVSD values of the AC DBD images at 2.4, 3.2, and 3.6 kV are 8.25, 4.34, and 4.68, and the GVSD values of the ns pulsed DBD images at 3.3,3.6,and 4.4 kV are 5.48,0.73,and 3.45.The lower GVSD value indicates the better discharge uniformity.The values of GVSD and the discharge images are consistent.For the GVSD below 1, the discharge seems very uniform and it can be defined as a uniform discharge, as shown in the ns pulsed DBD at 3.6 kV.

    3.2.Electrical characteristics of argon DBD

    Because the DBD uniformity is strongly associated with the electrical characteristics of discharge, the electrical parameters of the ns pulsed DBD and AC DBD are calculated.For DBD structure, the applied voltage Utis dropped on the gas gap and the dielectric barrier,as Ugand Ud,and the measured current Itwith current probe measurement is the sum of the displacement current, Id, and conduct current, Ig.As the method described in our previous studies[10,33,34],Udcan be estimated with an insert capacitor in the ground side and Ugis obtained with the subtraction of Udfrom Ut.Idcan be obtained without discharge under same applied voltage by pumping the reactor to vacuum or replace the inert gas with air.Igcan be obtained with the subtraction of Idfrom It.The separations of the applied voltage of AC and ns pulsed DBDs are shown in figures 3(a) and (c), and the separations of the measured currents are shown in figures 3(b) and (d).

    From the above figures that the peak values of Ugof AC and ns pulsed DBDs are much smaller than those of the applied voltages for part of the voltages dropped on the dielectric barriers.The peak value of Ugof AC DBD is about 1.2 kV and the peak value of Ugof ns pulsed DBD is about 1.6 kV.In ns pulsed DBD, the duration time of the Ugof the rising side of the pulse is very small, about 100 ns, which prevents the electron avalanches over development.At the falling side of the pulse, the accumulated charge causes the reverse stroke.In AC DBD, the duration time of the Ugis very long, about 25 μs, which results in many current pulses in a very long time scale.The electron avalanches are under lasting electric field and the filaments are easily formed.The peak value of Igseparated from ns pulsed DBD is about 2.4 A, which is much higher than that at mA level under AC DBD.The amount of transferred charge(Q)has an important influence on the reaction rate,efficiency and application effect of plasma.In general, the Q can be calculated by integrating Igover a period.However, due to the bipolar nature of Igduring AC and ns pulse DBD discharge, the Q at the rising edge and the falling edge will offset each other.Therefore,the method of calculating Q in the whole discharge process is to add the absolute value of Q in the first half cycle and the second half cycle, as shown in formula (2):

    According to the above formula, the values of Q of AC and ns pulsed DBDs are 142.5 nC and 151.1 nC,respectively.The results show that there are more active particles produced in ns pulsed DBD than in AC DBD.

    Discharge power is an important parameter to describe the intensity of discharge, including the instantaneous total power Pt, instantaneous gas gap power Pgand instantaneous dielectric layer power Pd, which can be obtained by equations (3)-(5):

    The Pt,Pgand Pdof Ar DBDs excited by AC and ns pulse are shown in figure 4.From figure 4 that the peak value of Ptunder AC DBD is around 30 W,and that of ns pulsed DBD is about 4.2 kW.The Pgof DBD excited by ns pulse is also larger than the value of AC DBD.Using the instantaneous power data,the corresponding average total powerPt,average air gap powerPg,average dielectric layer powerPdand energy efficiency η can be calculated by equations (6)-(9):

    Figure 4.The power separation waveforms of DBD excited by AC (a) and ns pulse (b).

    3.3.Optical emission spectra of argon DBD

    In DBD, a large number of electrons and ions are produced when the applied voltage exceeds the breakdown voltage and with the electric field in space, the electrons are accelerated and gain energy to become high-energy electrons, which eventually lead to the excitation, ionization, and dissociation of the background molecules into active species.Some excited species can be observed by the optical emission spectra.In Ar DBD, most of the active species are excited states of argon atoms and the excited states of argon atoms transit back to the lower level excited or ground states to release photon, which can be observed

    The intensities of the observed optical emission spectra represent the relative number densities of the excited species.Figure 5 shows the emission spectra of AC Ar DBD and ns pulsed Ar DBD.The applied voltage of AC power supply is fixed at 3.2 kV, and that of ns pulse power supply is fixed at 3.6 kV.From figure 5, it can be seen that the excited species of Ar DBD excited by AC and ns pulse discharge are the same.But the intensities of the emission lines are different.The optical emission intensities of excited Ar in ns pulsed DBD are higher than those in AC DBD.Taking the Ar line(696.5 nm) as an example, under the same conditions, the optical emission intensity in ns pulsed DBD is about 2.31 times that in AC DBD.By comparing the emission intensities of the excited Ar,it can be concluded that ns pulsed Ar DBD can produce plasma with more active particle and higher reactivity than AC DBD.The main reason is that the applied voltage of ns pulse power supply can rise to a value much higher than the breakdown voltage of gas in a short time,so it can provide a larger initial electric field strength, generate a greater instantaneous power, and significantly improve the reaction rate, so as to produce more active particles in the discharge space.

    Figure 5.The optical emission spectra of AC and ns pulse excited Ar DBD.

    3.4.Discharge uniformity with different oxygen contents

    With the addition of oxygen, it participates in the discharge process and affects the discharge uniformity and reactivity.Figure 6 shows the discharge images of Ar DBDs under AC and ns pulse excitations with different oxygen contents.The applied voltage of AC power supply is fixed at 3.2 kV, and that of ns pulse power supply is fixed at 3.6 kV.To quantitatively analyze the variation of Ar DBD uniformity with oxygen content under different power supply conditions, the GVSD of the discharge images of DBDs excited by different power supplies at various oxygen additions are calculated.Figure 7 is the GVSD value of figure 6.The quantitative analysis of the optical discharge images shows that the regularity of uniformity change reflected by the GVSD value is consistent with the luminescent images.

    Figure 6.The discharge images of DBD excited by AC (a) and ns pulse (b) power supplies at various oxygen additions.

    Figure 7.The gray value standard deviation of DBD excited by AC and ns pulse power supplies at various oxygen additions.

    It can be seen that under high frequency AC excitation,when the oxygen content is in the range of 0%-0.2%, the discharge is more intense and the discharge gap is full of bright filaments,and the uniformity is poor.With the increase of oxygen content, the electronegative gas O2will adsorb a large number of electrons and inhibit the development of electron avalanche, resulting in the decrease of discharge intensity,the decrease of bright discharge filaments.When the oxygen content increases to 1%, the discharge is relatively stable, the discharge filaments become dense, and the uniformity is improved.In this stage,the GVSD decreased from 5.34 to 2.22.After that,with the increase of oxygen content to 6%,due to serious space electric field distortion,the discharge intensity further weakens, the number of discharge filaments decreases, the uniformity decreases again, and the GVSD gradually increased to 4.58.When the ns pulse is used as the excitation power supply, under the condition of extremely low oxygen content (0%-0.03%), the discharge uniformity under different oxygen content has little change and the GVSD of the discharge image is less than 1.This is due to the Penning ionization between Ar metastable particles and O2,which produces a large number of electrons and leads to the cross fusion of electron avalanches, so that the uniformity of discharge can be maintained.With the increase of oxygen content, the uniformity of DBD discharge decreases gradually.When the oxygen content reaches 0.1%,bright filaments appear in the discharge gap, the discharge begins to be unstable, and the uniformity decreases rapidly.In this stage,the GVSD increased to 2.86.With the increase of oxygen content to 0.2%-0.6%, the discharge filaments become dark,the number of filaments increases, the distribution of filaments in the discharge space tends to be uniform, and the GVSD value is maintained at about 2.When the oxygen content increases to 6%, a large number of metastable particles of Ar were quenched and the number of space free electrons was further weakened.Therefore, the discharge intensity becomes weaker, the brightness of filament discharge decreases, and the GVSD value decreases.When O2was added further(0.6%-6%),O2adsorbed a large number of electrons to formions, which led to the electric field in space further distortion and the poor uniformity.The excess O2cannot fill the whole discharge space.In this stage, the GVSD further increased to 4.58.

    3.5.Electrical properties with different oxygen contents

    Figure 8 shows the variation trend of the transfer charge with oxygen addition in DBD under AC and ns pulse excitations.Because O2is a kind of electronegative gas, it can adsorb electrons, inhibit the development of electron avalanche, and lead to the decrease of discharge filaments.It can be seen that with the increase of oxygen addition, the transfer charge (Q)presents a continuous downward trend.When the oxygen content increases from 0%to 6%,the Q decreases from 142.5 nC to 37.9 nC of DBD under AC excitation, and from 151.1 to 70.6 nC of DBD under ns pulse excitation.Under the same oxygen content,the value of Q of DBD excited by ns pulse is larger than that excited by AC.The reason is that the DBD discharge time of ns pulse excitation is much shorter than that of DBD AC excitation in a single cycle, and ns pulsed DBD has higher Ugand Ig.Figure 9(a)shows the variation trend of average discharge power of DBD excited by AC and ns pulse with oxygen addition.As shown in figure 9,with the increase of O2content,andof AC and ns pulsed DBDs decreased.Among them, when the oxygen content increases from 0%to 6%,theof AC decreases from 8.6 to 6.8 W,andof AC DBD decreases from 1.5 to 0.7 W.Theof ns pulsed DBD decreases from 2.9 to 0.9 W,andof ns pulsed DBD decreases from 1.9 to 0.5 W.

    Figure 8.The variations of transported charges of DBD excited by AC and the ns pulse power supplies at various oxygen additions.

    Figure 9.The variations of averaged power (a) and energy efficiency (b) of DBD excited by AC and ns pulse power supplies at various oxygen additions.

    Figure 9(b) shows the curves of energy efficiency with oxygen addition of DBDs under the excitation of two kinds of power sources.It can be found from figure 9(b) that the η of DBDs of AC and ns pulse excitation decreases with the addition of O2.Among them, η of ns pulsed DBD is in the range of 56.68%-67.01%, which is much larger than that of DBD of AC excitation (11.03%-17.17%).Generally, the energy efficiency is mainly related to the charge utilization rate and dielectric heat loss.Due to the short time interval between the two discharges of ns pulse, the charge will not dissipate immediately after the discharge at the rising edge of the voltage, but will still be on the surface of the dielectric barrier or in the gap, which is conducive to the generation of discharge at the falling edge of the pulse voltage.Therefore,the charge utilization rate of ns pulse DBD is higher.Because the duration of ns pulse voltage is very short, the degree of energy concentration on the surface of dielectric is reduced,so the energy loss is less.On the other hand, because O2is a kind of electronegative gas with high electron affinity, the higher the oxygen content is, the more electrons it adsorbs and the faster the quenching speed of active particles is.Therefore, the energy efficiency decreases continuously with the increase of oxygen content.

    3.6.Optical emission spectra with different oxygen contents

    Figure 10 shows the emission spectra of DBD excited by AC and ns pulse with oxygen content of 0.4%.After adding oxygen into Ar, the composition of the main spectral lines observed from Ar/O2DBD excited by two kinds of power sources has no obvious change.However, a small amount of O I(777.4 nm)can be found(as shown in the enlarged part in figure 10 with the spectra of AC DBD in pure Ar as a reference), and the intensity of O line of AC DBD is smaller than that of ns pulsed DBD.The reason is that the energy for the production of the upper state of O I(777.4 nm),O(3p5P),is higher than the energy of the observed Ar emission lines at 4p states(around 13 eV).The energies for the ground state O atom production and O(3p5P)excitation from ground state O are 5.1 eV and 3.6 eV [35], according to reactions (11) and(12),and 10.7 eV, respectively.Then, the O(3p5P)is mainly produced by the direct electron impact dissociation excitation,which needs 15.8 eV or 14.3 eV, and ns pulsed DBD has a higher electron temperature than the AC DBD.Therefore,the O I (777.4 nm) intensity is much weaker than the Ar emissions and the intensity of O line of ns pulsed DBD is larger than that of AC DBD.The energy of metastable Ar is 11.72 eV [10], which can dissociate O2molecular but cannot ionize the O2molecular (12.06 eV ionization energy [36]).But the upper states of Ar lines at 4p states with around 13 eV can collide and ionize O2molecular to produce more electrons

    Figure 10.The optical emission spectra of(a)AC and ns pulse excited Ar DBD at 0.4%O2,and(b)the enlarged spectra of AC Ar DBD,AC and ns pulse excited Ar DBD at 0.4% O2.

    Figure 11.The optical emission intensities of the Ar lines of DBDs excited by AC and ns pulse power supplies at various oxygen contents.

    Figure 11 shows the variation trend of the peak intensity of typical particles with oxygen concentration of DBDs under the excitations of two kinds of power sources.The typical optical line intensities under AC and ns pulsed DBDs decreased with the oxygen content increasing,and the typical line intensities of AC DBD are smaller than those of ns pulsed DBD.Taking the Ar I (696.5 nm) as an example, the intensity of the line decreased by 95.3% under AC excitation and 96.8% under ns pulse excitation after 6%oxygen added.This shows that a large number of electrons are adsorbed by O2to formons,which reduces the electron number density in space.As a result, the discharge intensity is weakened and the optical emission intensity of Ar line decreases significantly.

    The emission intensity I of Ar excited by electron collision can be given by formula (14) [10, 33]:

    where Cλ, A and τ are the spectral response of the optical measurement system,Einstein coefficient,and effective lifetime,respectively.(ε) is the excitation cross-section andf(ε) is the electron energy distribution function (EEDF).Considering the EEDF can be seen as Maxwell’s function for the electron local equilibrium, EEDF determines the value of Te.is proportional to the excitation rate k and equation(14)can be present as equation(15).[Ar]is the ground state Ar density.

    The change of experimental conditions results in the changes of the electron number density neand electron temperature Te.The ratio of two Ar emission intensities at different wavelengths λ with different excitation energies can eliminate the effect of neand is only determined by the ratio of k, as shown in equation (16).The ratio of k reflects the electron energy distribution of energetic electrons for the two excitation processes and the equation(16)can be rewritten as equation (17).With the ratio of k and the Bolzmann solver BOLSIG + code [37], the electron excitation energy Tecan be obtained [10]:

    From equation(17),it can be seen that for the determination of Te, the spectral response of different emission lines should be measured and the effective lifetime of the upper states should be obtained.The effective lifetime τ can be expressed by equation (18).

    where τ0is the radiative lifetime, [Q] is the quencher q number density, andis the collisional quenching rate coefficient.Considering the small amount of O2addition and the uncertainty of collisional quenching rate coefficient,the accurate value of the ratio of k is hard to be obtained,which results in the uncertainty of the value of Te.However,it is still possible to get the tendency of Tewith variable parameters for the purpose of comparation[33].

    Because the Ar I (696.5 nm, excitation energy: 13.3 eV)and the Ar I (912.3 nm, excitation energy: 12.9 eV) lines are separated from other lines, and the excitation energy difference is about 0.4 eV.Therefore,it can use the ratio of Ar I(696.5 nm)and Ar I (912.3 nm) intensities to express the relative concentration of high excited state particles and low excited state particles, which reflects the trend of Tewith different O2contents.Figure 12 shows the ratio of Ar I (696.5 nm) and Ar I(912.3 nm)emission intensities of DBDs under AC and ns pulse excitations at different O2contents.With the increase of O2content,the ratios of Ar I(696.5 nm)to Ar I(912.3 nm)spectral intensities of DBDs under the excitations of the two kinds of power supplies decease continually and the ratio of spectral intensities of AC DBD is lower than that of ns pulsed DBD.It means ns pulsed DBD has a higher Tethan AC DBD,and it is more obvious under low oxygen content.Assuming DBD in uniform status, the electron density, ne, can also be calculated with the drift velocity of electron, discharge area, and the peak values of Ugas described in our former study [33].The result shows that neis 2.26×1017m?3for ns pulsed Ar DBD and 1.15×1017m?3for AC Ar DBD and with 6%oxygen content,nedrops to 1.52×1017m?3for ns pulsed Ar DBD and 3.67×1016m?3for AC Ar DBD.

    Figure 12.The ratio of the emission intensities of Ar I (696.5 nm)and Ar I (912.3 nm) in AC and ns pulsed DBDs at various oxygen contents.

    4.Conclusion

    In this work, the uniformity and reactivity of AC and ns pulsed Ar/O2DBD are studied with optical and electrical measurements.With GVSD analysis, the discharge uniformity is obtained quantitatively and it is shown that the ns pulsed DBD has a much better uniformity than AC DBD.Compared with the AC DBD, the ns pulse DBD has higher peak value of Ug, Ig, Q, and total instantaneous powers.The maximum energy efficiency of ns pulse excitation is 65.5%,while that of AC excitation is only 17.4%.With the 0.03%O2addition,the GVSD of the ns pulsed DBD still keeps below 1,which indicates the uniform discharge.With more O2addition, the uniformity of ns pulsed DBD gets worse for the space electric field distortion by, which promotes the filamentary formation.For AC DBD, the intensity of filaments is weakened by the attachment effect of the added O2,which enhances the discharge uniformity.The Teis indicated by the ratio of two Ar emission intensities.The result shows that the ns pulsed DBD has an obvious higher Tethan AC DBD.With the addition of O2, the Teof both ns pulsed and AC DBDs drops quickly.With the O2addition from 0% to 6%, the neof ns pulsed Ar DBD decreases from 2.26×1017m?3to 1.52×1017m?3, and the neof AC Ar DBD decreases from 1.15×1017m?3to 3.67×1016m?3.

    Acknowledgments

    This work is supported by National Natural Science Foundation of China (Nos.52037004 and 51777091).

    猜你喜歡
    陳潔劉峰方志
    Ultrafast magneto-optical dynamics in nickel(111)single crystal studied by the integration of ultrafast reflectivity and polarimetry probes
    《湖中漫行》樂譜
    The investigation of OH radicals produced in a DC glow discharge by laser-induced fluorescence spectrometry
    History of World Smile Day
    陌上
    黑龍江民國方志所刊名家墨跡選
    書法賞評(2019年2期)2019-07-02 12:10:50
    嘉絨藏族地區的舊方志編纂
    西藏研究(2017年1期)2017-06-05 09:26:11
    劉峰:從“發明狂人”到“創業達人”
    金色年華(2016年14期)2016-02-28 01:44:29
    喇叭花兒搖銅鈴
    Average Incremenral Correlarion Analysis Model and Irs Applicarion in Faulr Diagnosis
    成在线人永久免费视频| 制服丝袜大香蕉在线| 国产精华一区二区三区| 国产精品永久免费网站| 激情在线观看视频在线高清| 久久国产乱子伦精品免费另类| 美女大奶头视频| 一区二区日韩欧美中文字幕| 精品久久久久久久末码| 精品久久久久久久久久久久久 | 日韩欧美国产在线观看| 大型黄色视频在线免费观看| 久久精品人妻少妇| 婷婷精品国产亚洲av在线| 欧美av亚洲av综合av国产av| 国产男靠女视频免费网站| 午夜福利18| 日本 av在线| 黄片小视频在线播放| 婷婷六月久久综合丁香| 国产91精品成人一区二区三区| 国产成年人精品一区二区| 亚洲中文av在线| 国产精品爽爽va在线观看网站 | 午夜老司机福利片| 国产精品久久电影中文字幕| 午夜日韩欧美国产| 麻豆久久精品国产亚洲av| 亚洲精品色激情综合| 视频在线观看一区二区三区| 黄片播放在线免费| 天天躁夜夜躁狠狠躁躁| 极品教师在线免费播放| 国产成人欧美在线观看| 欧美性长视频在线观看| 午夜福利18| 国内毛片毛片毛片毛片毛片| 成熟少妇高潮喷水视频| 亚洲欧美精品综合一区二区三区| 久久精品国产清高在天天线| 久久久久九九精品影院| 国产精品永久免费网站| 国产亚洲av高清不卡| 男女做爰动态图高潮gif福利片| 99国产精品一区二区蜜桃av| 丰满人妻熟妇乱又伦精品不卡| 手机成人av网站| 亚洲第一av免费看| 日本 欧美在线| 欧美中文综合在线视频| 亚洲成人免费电影在线观看| 哪里可以看免费的av片| 免费在线观看亚洲国产| 99国产精品一区二区三区| 午夜影院日韩av| 欧美性猛交╳xxx乱大交人| 精品无人区乱码1区二区| 免费观看精品视频网站| 麻豆久久精品国产亚洲av| АⅤ资源中文在线天堂| 老司机午夜十八禁免费视频| 欧美日韩瑟瑟在线播放| 久久天堂一区二区三区四区| 99在线视频只有这里精品首页| 欧美久久黑人一区二区| 国产亚洲av高清不卡| 亚洲国产精品999在线| 欧美精品啪啪一区二区三区| 国产片内射在线| xxx96com| 精品久久久久久久人妻蜜臀av| 看免费av毛片| 99久久99久久久精品蜜桃| 在线国产一区二区在线| 日韩精品中文字幕看吧| 亚洲精品国产区一区二| 女人高潮潮喷娇喘18禁视频| 草草在线视频免费看| 国产精品一区二区三区四区久久 | 久久亚洲真实| 麻豆成人午夜福利视频| 国产亚洲欧美精品永久| 久久国产精品人妻蜜桃| 91在线观看av| 亚洲人成网站在线播放欧美日韩| 久久国产乱子伦精品免费另类| 亚洲av成人av| 两人在一起打扑克的视频| 国产成+人综合+亚洲专区| 午夜福利18| 满18在线观看网站| 欧美久久黑人一区二区| 免费看a级黄色片| 国内毛片毛片毛片毛片毛片| 国产人伦9x9x在线观看| 18禁观看日本| 国产伦人伦偷精品视频| 亚洲成人久久爱视频| 成人三级做爰电影| 日日爽夜夜爽网站| 亚洲午夜精品一区,二区,三区| 色哟哟哟哟哟哟| 日韩成人在线观看一区二区三区| 岛国视频午夜一区免费看| 久久中文字幕人妻熟女| 十八禁人妻一区二区| av片东京热男人的天堂| 黄色丝袜av网址大全| 91九色精品人成在线观看| 亚洲成人免费电影在线观看| 欧美又色又爽又黄视频| 国内揄拍国产精品人妻在线 | 麻豆成人午夜福利视频| 91麻豆av在线| 色播在线永久视频| 夜夜看夜夜爽夜夜摸| 99re在线观看精品视频| 免费高清在线观看日韩| 他把我摸到了高潮在线观看| 日韩免费av在线播放| 在线永久观看黄色视频| 免费人成视频x8x8入口观看| 精品无人区乱码1区二区| 91大片在线观看| 美国免费a级毛片| 成人av一区二区三区在线看| 午夜a级毛片| 色综合站精品国产| 国产成人影院久久av| 欧美成人免费av一区二区三区| 中文资源天堂在线| 亚洲国产欧美日韩在线播放| 国内揄拍国产精品人妻在线 | 丝袜人妻中文字幕| x7x7x7水蜜桃| 成人一区二区视频在线观看| 757午夜福利合集在线观看| 亚洲全国av大片| 国产成年人精品一区二区| 免费搜索国产男女视频| 亚洲成人久久爱视频| 在线观看免费日韩欧美大片| 首页视频小说图片口味搜索| 一本精品99久久精品77| 在线观看舔阴道视频| 亚洲欧美激情综合另类| 丰满人妻熟妇乱又伦精品不卡| 无限看片的www在线观看| 此物有八面人人有两片| 国产主播在线观看一区二区| 日本免费a在线| 中文字幕人妻熟女乱码| 美女扒开内裤让男人捅视频| 亚洲中文日韩欧美视频| 亚洲电影在线观看av| 午夜福利18| 免费观看人在逋| 男人的好看免费观看在线视频 | 久9热在线精品视频| 最新在线观看一区二区三区| xxx96com| 在线观看66精品国产| 精品乱码久久久久久99久播| 免费人成视频x8x8入口观看| 欧美色欧美亚洲另类二区| 亚洲欧美日韩高清在线视频| 又黄又爽又免费观看的视频| 亚洲专区中文字幕在线| 亚洲成人国产一区在线观看| 51午夜福利影视在线观看| 午夜老司机福利片| 国产精品野战在线观看| 亚洲精品国产区一区二| 香蕉av资源在线| 欧美zozozo另类| 国产成人一区二区三区免费视频网站| 制服人妻中文乱码| 日韩精品中文字幕看吧| 精品电影一区二区在线| 日本精品一区二区三区蜜桃| 男女视频在线观看网站免费 | 特大巨黑吊av在线直播 | 免费高清在线观看日韩| 亚洲一卡2卡3卡4卡5卡精品中文| 天堂影院成人在线观看| 亚洲国产精品合色在线| 色在线成人网| 亚洲狠狠婷婷综合久久图片| 99精品久久久久人妻精品| 中文字幕久久专区| 男女做爰动态图高潮gif福利片| 别揉我奶头~嗯~啊~动态视频| 超碰成人久久| av有码第一页| 天堂影院成人在线观看| www日本黄色视频网| 禁无遮挡网站| 手机成人av网站| 亚洲精品国产精品久久久不卡| 精品日产1卡2卡| 亚洲精品国产区一区二| 久久精品国产亚洲av高清一级| 亚洲在线自拍视频| 一区福利在线观看| 国产97色在线日韩免费| 久久久久久九九精品二区国产 | 成熟少妇高潮喷水视频| 午夜福利在线在线| 久久午夜亚洲精品久久| 亚洲专区国产一区二区| 欧美日韩乱码在线| 一级毛片精品| 亚洲男人天堂网一区| 精品无人区乱码1区二区| 少妇 在线观看| 成人免费观看视频高清| 国产成人av激情在线播放| 国产成人系列免费观看| 最近在线观看免费完整版| 老司机深夜福利视频在线观看| 亚洲精品色激情综合| 老司机午夜福利在线观看视频| 国产午夜福利久久久久久| 国内毛片毛片毛片毛片毛片| 午夜免费鲁丝| 国产精品久久久久久精品电影 | 少妇被粗大的猛进出69影院| 成年免费大片在线观看| 精品电影一区二区在线| 日韩大码丰满熟妇| 757午夜福利合集在线观看| 久久精品国产清高在天天线| 午夜福利视频1000在线观看| 国产精品香港三级国产av潘金莲| 99精品欧美一区二区三区四区| www.www免费av| 91麻豆av在线| 老熟妇乱子伦视频在线观看| 欧美黑人精品巨大| 桃红色精品国产亚洲av| 国产久久久一区二区三区| 日韩中文字幕欧美一区二区| 国产在线观看jvid| 久久人妻福利社区极品人妻图片| 在线av久久热| 国产亚洲精品av在线| 国产男靠女视频免费网站| а√天堂www在线а√下载| 欧美成人免费av一区二区三区| 国产精品99久久99久久久不卡| 国产精品久久久久久精品电影 | 久久热在线av| 国产高清视频在线播放一区| or卡值多少钱| 十分钟在线观看高清视频www| 色综合婷婷激情| 欧美日本亚洲视频在线播放| 欧美激情高清一区二区三区| 校园春色视频在线观看| 久久 成人 亚洲| 每晚都被弄得嗷嗷叫到高潮| 国产一区二区在线av高清观看| 久久久国产成人免费| 精品久久久久久久人妻蜜臀av| 人人妻,人人澡人人爽秒播| 丝袜美腿诱惑在线| 精品欧美一区二区三区在线| 亚洲一区中文字幕在线| 日本 av在线| 久久精品国产亚洲av高清一级| 亚洲精品国产一区二区精华液| 色哟哟哟哟哟哟| 欧美激情极品国产一区二区三区| e午夜精品久久久久久久| 婷婷亚洲欧美| ponron亚洲| 亚洲熟妇中文字幕五十中出| 99精品久久久久人妻精品| 久久青草综合色| 亚洲人成网站在线播放欧美日韩| 国产免费av片在线观看野外av| 男女之事视频高清在线观看| 狂野欧美激情性xxxx| 变态另类成人亚洲欧美熟女| 亚洲成av片中文字幕在线观看| 免费在线观看亚洲国产| 成人国产综合亚洲| 国产又爽黄色视频| 免费搜索国产男女视频| xxx96com| 男女午夜视频在线观看| 丝袜人妻中文字幕| 亚洲在线自拍视频| 亚洲欧美日韩无卡精品| 国产伦人伦偷精品视频| 久9热在线精品视频| 女人爽到高潮嗷嗷叫在线视频| 在线永久观看黄色视频| 国产精品美女特级片免费视频播放器 | 最新美女视频免费是黄的| 亚洲精品一卡2卡三卡4卡5卡| 午夜免费观看网址| 99精品久久久久人妻精品| 国产成人精品久久二区二区免费| 国产亚洲精品第一综合不卡| 母亲3免费完整高清在线观看| 精品国内亚洲2022精品成人| 韩国精品一区二区三区| 99国产综合亚洲精品| 国产成人啪精品午夜网站| 国语自产精品视频在线第100页| 久久精品国产亚洲av香蕉五月| 夜夜爽天天搞| 国产人伦9x9x在线观看| 欧美日韩精品网址| 国产又色又爽无遮挡免费看| 亚洲国产精品成人综合色| 午夜激情福利司机影院| 两性午夜刺激爽爽歪歪视频在线观看 | 99国产精品一区二区三区| 两个人免费观看高清视频| 99riav亚洲国产免费| 一区二区三区国产精品乱码| 日本 av在线| av福利片在线| 久久精品国产综合久久久| 久久亚洲精品不卡| 一区二区三区精品91| 国产激情偷乱视频一区二区| 欧美日本亚洲视频在线播放| 这个男人来自地球电影免费观看| 中文字幕av电影在线播放| 国产又爽黄色视频| 亚洲色图 男人天堂 中文字幕| 国产亚洲精品一区二区www| 男女做爰动态图高潮gif福利片| 在线观看免费日韩欧美大片| 久久久久国产一级毛片高清牌| 国语自产精品视频在线第100页| 波多野结衣高清无吗| 亚洲国产欧洲综合997久久, | 美国免费a级毛片| 久久亚洲精品不卡| 在线观看免费日韩欧美大片| 日日摸夜夜添夜夜添小说| 波多野结衣av一区二区av| 久久亚洲真实| 在线播放国产精品三级| 又黄又粗又硬又大视频| 麻豆久久精品国产亚洲av| 嫩草影院精品99| 中文在线观看免费www的网站 | 日韩欧美 国产精品| 精品国产乱码久久久久久男人| 久久精品国产99精品国产亚洲性色| 欧美日韩黄片免| 午夜福利一区二区在线看| 一进一出抽搐动态| 一本大道久久a久久精品| 黄色女人牲交| 制服诱惑二区| 亚洲国产欧美网| 女人高潮潮喷娇喘18禁视频| 精品国产乱码久久久久久男人| 亚洲人成伊人成综合网2020| 中文字幕高清在线视频| 亚洲精品在线观看二区| 母亲3免费完整高清在线观看| 亚洲第一电影网av| 国产高清视频在线播放一区| 一夜夜www| 91老司机精品| 成人三级黄色视频| 亚洲精品久久国产高清桃花| 亚洲精品国产一区二区精华液| 亚洲国产精品合色在线| 一个人免费在线观看的高清视频| 人人妻人人澡人人看| 日韩精品中文字幕看吧| 少妇被粗大的猛进出69影院| 1024手机看黄色片| 亚洲最大成人中文| 天堂√8在线中文| 欧美黄色淫秽网站| 一区二区三区激情视频| 90打野战视频偷拍视频| 男女那种视频在线观看| 啦啦啦免费观看视频1| 可以在线观看的亚洲视频| 国产精品98久久久久久宅男小说| 女性生殖器流出的白浆| 国内久久婷婷六月综合欲色啪| 99国产极品粉嫩在线观看| 十八禁人妻一区二区| 超碰成人久久| 色综合站精品国产| 黄色a级毛片大全视频| 国内揄拍国产精品人妻在线 | 欧美最黄视频在线播放免费| 国内揄拍国产精品人妻在线 | 欧美日韩精品网址| 18禁裸乳无遮挡免费网站照片 | 最近最新免费中文字幕在线| 久久香蕉精品热| 欧美乱妇无乱码| 欧美亚洲日本最大视频资源| 免费在线观看黄色视频的| 亚洲全国av大片| aaaaa片日本免费| 色在线成人网| 日本三级黄在线观看| 国产一卡二卡三卡精品| 国产激情欧美一区二区| 午夜福利免费观看在线| 不卡av一区二区三区| 成人欧美大片| АⅤ资源中文在线天堂| 国产亚洲精品av在线| 国产伦人伦偷精品视频| 亚洲精品一卡2卡三卡4卡5卡| 18禁裸乳无遮挡免费网站照片 | 欧美黑人巨大hd| 亚洲人成网站在线播放欧美日韩| 后天国语完整版免费观看| 999久久久国产精品视频| 亚洲人成伊人成综合网2020| 欧美在线黄色| 九色国产91popny在线| 国产av不卡久久| 精品卡一卡二卡四卡免费| 免费女性裸体啪啪无遮挡网站| 欧美日韩瑟瑟在线播放| 视频在线观看一区二区三区| 日韩欧美 国产精品| 免费在线观看亚洲国产| 国产av在哪里看| 亚洲一卡2卡3卡4卡5卡精品中文| 动漫黄色视频在线观看| 麻豆久久精品国产亚洲av| 午夜福利欧美成人| 人妻丰满熟妇av一区二区三区| 美女高潮到喷水免费观看| 成人18禁高潮啪啪吃奶动态图| 精品国产一区二区三区四区第35| 成年免费大片在线观看| 97碰自拍视频| 欧美日韩福利视频一区二区| 麻豆成人av在线观看| 99国产精品一区二区蜜桃av| 国产精品亚洲美女久久久| 女生性感内裤真人,穿戴方法视频| 国产精品一区二区免费欧美| 婷婷六月久久综合丁香| 色av中文字幕| 国产在线观看jvid| 亚洲成a人片在线一区二区| 欧美+亚洲+日韩+国产| 国产av又大| 亚洲精品在线美女| 久久久久国内视频| 国产精品98久久久久久宅男小说| 最近最新中文字幕大全免费视频| 欧美日本视频| videosex国产| 国产激情偷乱视频一区二区| 哪里可以看免费的av片| 欧美一级a爱片免费观看看 | 亚洲三区欧美一区| 国产成人精品无人区| 麻豆一二三区av精品| 亚洲av成人av| 啦啦啦观看免费观看视频高清| 亚洲成人国产一区在线观看| 国产久久久一区二区三区| 国产不卡一卡二| 久久草成人影院| 国产一区在线观看成人免费| 色综合欧美亚洲国产小说| av中文乱码字幕在线| 国产亚洲av嫩草精品影院| 亚洲国产高清在线一区二区三 | 九色国产91popny在线| 国产精品免费一区二区三区在线| 精品欧美一区二区三区在线| 美女大奶头视频| 两人在一起打扑克的视频| 日本五十路高清| 在线看三级毛片| 国产三级在线视频| 亚洲一区高清亚洲精品| 亚洲美女黄片视频| av片东京热男人的天堂| 国产av在哪里看| 99久久精品国产亚洲精品| 日本五十路高清| 亚洲免费av在线视频| 国产三级在线视频| 女人被狂操c到高潮| 亚洲成人精品中文字幕电影| 首页视频小说图片口味搜索| 亚洲美女黄片视频| 国产精品亚洲av一区麻豆| 村上凉子中文字幕在线| 女人被狂操c到高潮| 成人三级黄色视频| 成人三级做爰电影| av在线播放免费不卡| 色综合欧美亚洲国产小说| av欧美777| 成熟少妇高潮喷水视频| av在线播放免费不卡| 欧美丝袜亚洲另类 | tocl精华| 日韩成人在线观看一区二区三区| 男女那种视频在线观看| 制服丝袜大香蕉在线| 夜夜看夜夜爽夜夜摸| 两人在一起打扑克的视频| 午夜免费观看网址| 91九色精品人成在线观看| 丝袜人妻中文字幕| 国产男靠女视频免费网站| 中文字幕最新亚洲高清| av在线天堂中文字幕| av免费在线观看网站| 精品熟女少妇八av免费久了| 99re在线观看精品视频| 窝窝影院91人妻| 日韩av在线大香蕉| 亚洲全国av大片| 法律面前人人平等表现在哪些方面| 国产av不卡久久| 欧美激情久久久久久爽电影| 在线观看免费午夜福利视频| 一区福利在线观看| 一级毛片高清免费大全| 18美女黄网站色大片免费观看| 此物有八面人人有两片| 久久久久精品国产欧美久久久| 精品久久久久久久毛片微露脸| 欧美精品亚洲一区二区| 精品一区二区三区四区五区乱码| 黄色女人牲交| 国产亚洲精品av在线| 俺也久久电影网| 无遮挡黄片免费观看| 黄色a级毛片大全视频| 51午夜福利影视在线观看| 久久婷婷成人综合色麻豆| 狂野欧美激情性xxxx| 十八禁网站免费在线| 欧美激情久久久久久爽电影| 亚洲成人久久爱视频| 男女做爰动态图高潮gif福利片| 国产成人精品久久二区二区免费| 久久精品成人免费网站| 97碰自拍视频| 观看免费一级毛片| 亚洲欧美一区二区三区黑人| 丝袜在线中文字幕| 午夜福利成人在线免费观看| 国产精品二区激情视频| 色老头精品视频在线观看| 一进一出抽搐动态| 亚洲激情在线av| 欧美乱色亚洲激情| 午夜精品久久久久久毛片777| 一区福利在线观看| 高潮久久久久久久久久久不卡| 午夜福利免费观看在线| 超碰成人久久| 中亚洲国语对白在线视频| 亚洲人成网站在线播放欧美日韩| 亚洲成av人片免费观看| 日本免费一区二区三区高清不卡| xxxwww97欧美| 国产一区在线观看成人免费| 中文字幕最新亚洲高清| 国产精品九九99| 国产精品亚洲美女久久久| 日本a在线网址| 熟女电影av网| 国产国语露脸激情在线看| 国产又爽黄色视频| 中文字幕最新亚洲高清| 波多野结衣高清作品| 免费一级毛片在线播放高清视频| 国产精品精品国产色婷婷| 欧美黄色淫秽网站| av欧美777| 黄色a级毛片大全视频| 久久久精品欧美日韩精品| 国产精品国产高清国产av| 午夜免费激情av| 18禁观看日本| 精品欧美一区二区三区在线| 18禁国产床啪视频网站| 精品久久久久久久人妻蜜臀av| 黄频高清免费视频| 国产精品亚洲一级av第二区| 操出白浆在线播放| 一级a爱片免费观看的视频| 久久午夜综合久久蜜桃| 啦啦啦 在线观看视频| 9191精品国产免费久久| 日韩av在线大香蕉| 999精品在线视频| 在线av久久热| 久久精品国产清高在天天线| 看片在线看免费视频| 狠狠狠狠99中文字幕| 日韩中文字幕欧美一区二区| 亚洲欧美激情综合另类| 久久婷婷人人爽人人干人人爱| 日日夜夜操网爽|