• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Three-dimensional non-equilibrium modeling of a DC multi-cathode arc plasma torch

    2021-07-07 02:40:28ZelongZHANG張澤龍ChengWANG王城QiangSUN孫強andWeidongXIA夏維東
    Plasma Science and Technology 2021年7期
    關(guān)鍵詞:王城孫強

    Zelong ZHANG(張澤龍),Cheng WANG(王城),Qiang SUN(孫強) and Weidong XIA(夏維東)

    1 Department of Thermal Science and Energy Engineering,University of Science and Technology of China,Hefei 230027,People’s Republic of China

    2 Anhui Advanced Technology Research Institute of Green Building,Hefei 230601,People’s Republic of China

    Abstract In this paper,a three-dimensional non-equilibrium steady arc model is used to investigate the temperature,velocity and electromagnetic field in multi-cathode arc torch,and the formation mechanism of a large-area,uniform and diffused arc plasma is analyzed.The numerical simulation results show that a large volume plasma region can be formed in the central region of the generator during discharge.During this process,the maximum electron temperature appears near the cathode and in the central convergence region,while the maximum heavy particle temperature only appears in the central convergence region.This phenomenon is consistent with the experimental arc images.Near the cathode tip,the arc column is in a contraction state.In the area slightly away from the cathode,the six arc columns begin to join together.In the plasma generator,there is a large-scale current distribution in all directions of X,Y and Z,forming a stable arc plasma with a wide range of diffusion.The calculated electron temperature distribution is in good agreement with the measured electron temperature.The results suggest that the largearea diffused arc plasma in the multi-cathode arc torch is the combined effect of current distribution,convection heat transfer and heat conduction.

    Keywords:temperature uniformity,numerical simulation,non-equilibrium,multiple cathode,large-volume arc plasma

    1.Introduction

    Arc plasma is a partially ionized gas with high temperature,enthalpy and chemical activity.It has been widely used in many industrial fields,including plasma spraying and material processing[1–3].Arc plasma generated by the traditional single-electrode arc torch has a small cross-sectional area,which leads to a larger plasma parameter gradient.Meanwhile,the instability of the anode arc root causes a significant fluctuation in a plasma torch with this structure.Therefore,the uniformity of the prepared material is poor.The above defects prevent arc plasma from being more widely applied in industrial production.In order to better meet actual industrial demand and improve its application,it is necessary to obtain arc plasma with a large volume/area,that is stable and diffused.Many scholars have studied the methods of generating large-area arc plasma by multi-electrode structure arc torches.Yamadaet al[4–6]first developed the double-cathode argon arc which included two mutually independent tungsten cathodes in a welding torch.When the two tungsten cathodes discharged at the same time,a larger arc channel could be obtained,and a coupled arc was formed under the action of electromagnetic field and air flow.Lenget al[7]further studied the double-cathode welding arc and experimentally measured the pressure distribution of the double-cathode arc.The results showed that the discharge range of the doublecathode arc increased greatly under the coupling action,and the pressure distribution in the middle high-temperature region became relatively flat,rather than a simple superposition of the pressure distribution of two separate arc plasmas.In addition to the double cathode arc structure,Norrishet al[8]also proposed a three-cathode arc structure,which contained three independent cathodes,and an electrode integral along the weld direction,for improved thermal efficiency,so the weld speed could be significantly improved.Bobzinet al[9–11]developed TriplexProTM-200 plasma spraying equipment with three-cathode and single anode,which has been successfully applied in industrial spraying.Compared with traditional spraying equipment,the spraying quality is improved due to less arc fluctuation,and it also has the advantages of high power,long life and high efficiency.

    The double- or three-cathode arc presents better discharge characteristics.However,the large-volume arc formed by a multiple-strand arc column can easily be blown away by the airflow.The existence of a macroscopic current in the plasma also makes the coupling effect between the arc and the gas flow field stronger,significantly reinforcing the instability of the arc and leading to a large limitation in the applications of these types of torch structure.In this study,a multi-cathode arc plasma device is designed,which can obtain stable,circumferentially uniform and diffused arc plasma[12–14].Meanwhile,the annular multi-cathode structure can easily achieve axial powder feeding,which increases the interaction time between plasma and particles.Thus,the multi-cathode arc torch has great application prospects in industrial fields such as material processing,material preparing,spheroidization etc.Further study of the flow and temperature field inside the plasma torch is needed to provide better experimental and theoretical guidance for the six-cathode DC plasma torch.However,due to the complex structure of the multi-cathode arc torch,the coupling of internal flow field,temperature field and electromagnetic field is very strong.In the experimental process,it is difficult to directly measure various parameters of the six-cathode arc plasma torch.A limited understanding of the arc dynamics and thermodynamic behavior of the plasma torch restricts the wide application of the multi-cathode arc device.

    Fortunately,numerical simulation provides an effective way to understand the arc behavior inside a plasma torch.Numerous scholars have explored the internal arc dynamics of the single-cathode arc torch[15–23].However,research addressing the numerical simulation of multi-electrode DC arcs remains relatively scarce.The modeling of the multielectrode DC arc plasma torch is a highly challenging task due to its complex internal geometric structure.The temperature field coupled with electromagnetic field and flow field is also difficult to decipher,and the three-dimensional(3D)effect is more obvious in the multiple-cathode arc torch.Tanget al[24]simulated the behavior of a twin-torch system in an atmospheric environment based on the 3D steady-state LTE arc model.The results showed that the Lorentz force,generated by the interaction of the arc current with its own magnetic field,played a decisive role in the bending of the two arc columns.Colomboet al[25,26]and Guoet al[27]applied a two temperature model describing the 3D transient behavior of a dual torch plasma.The results showed that the plasma near the electrode and the cold wall was obviously in the LTE state due to insufficient energy exchange between electrons and heavy particles.Muggliet al[28,29]conducted a numerical simulation on the three-cathode arc torch.The results suggested that the existence of Lorentz force led to the uniform rotation of the three arcs downstream of the cathode,which caused a uniform distribute of velocity and temperature at the outlet.Research into the multi-cathode arc remains lacking.

    In our experiment[12,13],a stable large-area and hightemperature helium arc is formed by the arc torch,however,the formation mechanism is not clear.A 3D,two-temperature and steady helium arc model is established to predict the temperature field,flow field,and electromagnetic field inside the plasma torch with multiple cathodes.The reliability of the model is then validated by the experimental results.Moreover,the mechanism of multiple arc coupling inside the torch that forms a high-temperature and diffused arc is comprehensively analyzed.

    2.Numerical model

    2.1.Basic assumption

    The 3D non-equilibrium helium plasma model under atmospheric pressure is based on the following basic assumptions.

    (1)The plasma deviates from the LTE state,but is still in a local chemical equilibrium state.

    (2)The plasma is in a steady,laminar flow state.

    (3)The plasma is optically thin,that is,the absorption of radiant energy by an arc is negligible compared to the radiant energy over the full wavelength range.

    (4)The plasma is incompressible,and the physical property parameters are only a function of the heavy particle temperatureThand the electron temperatureTe.

    (5)Gravity and viscous dissipation terms are negligible.

    2.2.Governing equation

    Based on the above assumptions,the governing equation of helium non-equilibrium arc plasma can be written as follows.

    Mass conservation equation:

    Momentum conservation equation:

    where,u,vandware the components of velocity vectorVin theX,YandZdirections,respectively.ρ,pandμare density,pressure and viscosity of helium respectively.Fx,FyandFzare the components of Lorentz forceFin theX,YandZdirections,whereF=j×B,jandBare electric current density and the magnetic induction intensity vector.

    Electron energy conservation equation:

    Heavy-particle energy conservation equation:

    where,na,niandneare number density of neutral atoms,ions and electron,respectively.ThandTeare the temperature of heavy-particles and electrons.λhis the thermal conductivity of the heavy particles andλeis the thermal conductivity of the electrons.Eis the electric field andis the energy loss of the elastic collisions of electrons with heavy particles.0.7 ξ is a correction term,proportional to the ionization degreeξ=ne/(ni+na),which needs to be added to the electron enthalpy flow when the degree of ionization is high[30,31].

    Current continuity equation:

    Magnetic equation:

    whereσis the electrical conductivity,the electric current densityAis the magnetic vector potential,andξ0is the magnetic permeability of free space.

    In the above equations,the thermodynamic properties and the transport coefficients of two-temperature helium plasma are obtained from[32].

    2.3.Computational domain and boundary condition

    Figure 1 is a schematic of the six-cathode arc plasma experiment device.The arc chamber is composed of a cylinder with an inner diameter of 38 mm.By simultaneous discharge of multiple electrodes,a stable,uniform and largearea arc plasma can be obtained.The ring arranged cathode structure(tungsten with wt.2%lanthana,3 mm radius,40 mm length and a 1 mm radius at the tip plateau)is convenient to feed powder in axial direction,thereby increasing the interaction time of the plasma and the particles.The discharge image is shown in figure 2.As illustrated,the arc plasma represents a uniform,stable and diffused form,and the cathode arc root presents a complete diffused state with no contraction channel observed near the cathode tip.

    Figure 1.Schematic diagram of the experimental setup.

    Figure 2.Window viewed image of arc discharge. I=240 A,total 1.0 Nm3 h?1,helium gas,1 μs shutter,5000 frames/s(reproduced from[13].?2017 Chinese Physical Society and IOP Publishing Ltd.All rights reserved.).

    In this study,the simulations are carried out using the computational fluid dynamics software Fluent with userdefined functions in C language.The finite volume method is used to discretize the governing equation,and a simple algorithm is used to iteratively solve it.The calculation domain of plasma torch is shown in figure 3.The entire calculation domain consists of the inlet,cathode,anode,outlet and cold wall.The inner area of the computational domain has a structured grid with a grid spacing of 0.3 mm,and the boundary is an unstructured grid,which makes the flow field and temperature field inside the computational domain easier to converge,while the 3D effect caused by asymmetry is avoided.Figure 4 displays the grid on theY=0 m plane and theZ=0 m plane(the central plane of the six cathodes),respectively.It can be seen from the figure 5 that the internal mesh quality is improved and symmetrically distributed,which can reduce the fluctuation and asymmetry caused by the mesh quality.

    Figure 3.Computational domain of arc plasma with six cathodes.

    Figure 4.The computational domain and mesh for the(a) XZ(Y=0 m)plane,(b) XY(Z=0 m)plane.

    The working conditions calculated in this paper are consistent with the experiment.The total current of the six cathodes is 240 A,the current flowing through each cathode is 40 A and the total inlet helium gas flow is 17 slm.The boundary conditions used in the simulation are displayed in table 1.The inlet electron temperature and the heavy particle temperature are 1000 and 300 K,respectively,and the inlet velocity is given by the gas flow rate.It should be noted that there are two inlets.One is the upper part of the device and the other is around the cathode.The ratio of the ventilation of the two gas inlets is 1:1,and both are connected to helium,which is consistent with the experiment.The cathode and anode sheaths are ignored and current density and temperature on the cathode surface are directly given.According to experimental observations,as shown in figure 2,the arc root at the cathode tip is relatively diffused[13].Therefore,we directly assume that the cathode tip current density is uniformly distributed.The shape of the cathode is a frustum.The bottom radius of the cathode is 3 mm and the radius of the cathode tip plane is about 1 mm.The given cathode current is 40 A.According to the below equation,the current density value of ?1.274×107A m?2is obtained.

    Table 1.Boundary conditions.

    There is difference between the measured voltage and the calculated voltage.The measured value of arc voltage is about 54 V[12]and the calculated arc voltage is 37 V.In this paper,the cathode sheath is not considered.When the sheath layer is ignored,the current density distribution on the electrode surface and the electronic temperature distribution cannot be calculated coherently.Meanwhile,the voltage drop of the sheath layer is ignored,which leads to the calculated voltage being lower than the actual voltage[33,34].The aim of the present paper is to study the arc plasma distribution characteristics in the whole multi-cathode arc torch and that how the arc plasma generated by the cathodes interacts with each other.Therefore,that the cathode sheath is not considered has a weak influence on our study.

    3.Results and analysis

    3.1.The structure and configuration of arc plasma

    Figure 5 shows isothermal surface distribution of electron and heavy particle temperatures in the non-LTE model.It can be observed that the arc column is in a contraction state near the cathode tip due to the cooling of inlet airflow and the compression of Lorentz force.In the area slightly away from the cathode,the six arc columns begin to join together to form a whole diffused arc.In this way,a stable and large-volume arc is finally formed inside the plasma generator in all directions ofX,YandZ.In the central area of the arc torch,the temperature of electrons and heavy particles is obviously higher than that of the surrounding area due to the convergence.The maximum electron temperature appears in the vicinity of the cathode and in the central region of the arc chamber,while the maximum heavy particle temperature only appears in the central region of arc chamber.This is because in the vicinity of the cathode,the current density is high,and more Joule heat is generated.Joule heat is mainly used to heat electronsj·Ein the source term of the electron energy equation),so the high-temperature zone of electron temperature appears near the cathode.In the heavy particle energy equation,the heating source term is only the energy collision term between electrons and heavy particles only.

    Figure 6 shows the temperature distributions under different cross sections,which correspond to the cross sections ofZ=0 m,Y=0 m andX=0 m in the calculation domain of figure 4,respectively.It can be seen from figure 6 that in the central region of the arc chamber,the plasma is in a thermodynamic equilibrium state,and in the vicinity of the gas flow inlet and the cold wall surface,the plasma is in a non-LTE state.The heavy particle temperature is lower than the electron temperature.Figure 2 displays the window viewed image of helium arc discharge in the experiment.Comparing experimental and numerical results,the numerical temperature distribution is in good agreement with the experimental image.Furthermore,the cathode arc root displays an obvious diffusion mode,and the assumptions of our numerical simulation are in agreement with the results.

    Figure 6.The temperature distributions in Y=0 m,X=0 m and Z=0 m cross sections.

    Figure 7 shows the heavy particle temperature and electron temperature distributions in each section in theZdirection,where(a)–(f)of figure 7 respectively correspond to the sections in figure 4(a).It can be seen from the above figures that the arcs formed between the six cathodes and the anodes are close to each other in each section of the plasma torch.This convergence phenomenon occurs not only in the downstream(Z<0 m)region of the cathode but also in the upstream region of the cathode(Z>0 m)at the same time.Therefore,a stable,large-scale,high-temperature and diffused arc can be formed in the inside of the plasma torch in all directions.

    Figure 7.The temperature distributions at different cross-sections(a)–(f).

    Figure 8 shows consecutive images of the anode arc root by CCD camera in the experiment,from 200 ms to 260 ms.The arc roots can form a multiple-point distribution structure at the inlet of the anode nozzle.We can see that the helium arc in the experiment usually follows in the model of multi-point diffusion on the anode-inlet wall.Due to the limitations of the arc model,we cannot simulate the multi-point anode arc root shape.The simulated anode arc root spreads evenly on theanode wall surface as displayed in figure 9.To some extent,the numerical results are consistent with the experiment.

    Figure 8.Consecutive images(time ms)of anode spots with a 0.5 μs shutter([12]2016 ? Springer Science+Business Media New York 2016.With permission of Springer.).

    In both experiments and simulation,the six cathode jets can converge to form a stable,high-temperature and diffused region.This characteristic has significant application prospects in industrial fields such as material processing and spheroidization technology.The shape and size of the high temperature zone and the velocity and temperature fields within it are important factors in heating the particulate material.Under the given gas flow and current conditions shown in figure 7,the electron temperature and heavy particle temperature in the convergence zone reach up to 12 500 K.

    Figure 10 shows the excitation temperature of diffuse arc by experiment and numerical simulation.The excitation temperature of diffuse arc is determined by the Boltzmann plot method from the following equation:

    Figure 10.The electron temperature distributions in the Y direction(exp represents the experimental results,model represents the simulated results).

    whereIulis the intensity of the emission line,λulis the wavelength of the transition line,Aulis the probability of the transition,guis the statistical weight of the upper level,Dis a constant,kBis the Boltzmann constant andEnis exciting energy.Seven well isolated He I lines 388.865,447.148,471.314,501.568,587.562,667.815 and 706.519 nm are used in this study.For the specified wavelength,andEnare fixed values,andcan be calculated.By plotting theversusEn,we obtain the excitation temperature from the slope of the Boltzmann fitted straight line.Since the intensity of the plasma emission line collected and transmitted by the fiber during the experiment is the result of integrating the spectral intensity along the line of sight.The calculated temperature is referred to average temperature[35].A more detailed temperature measurement process is described in our previous experimental work[13].

    Figure 9.The anode root distribution obtained by numerical simulation.

    To compare the numerical results with experimental values,the numerical electron temperature in theZdirection must be integrated.We integrate the average of the electron temperatures on theX=0 m section obtained by numerical simulation in theZdirection by equation(13):

    The average electron temperatureTevain theYdirection of the arc plasma is thus determined.Figure 10 shows a comparison of numerical simulation results and experimental results.The present numerical electron temperature distribution agrees qualitatively with the measured electron temperature in the experiment.

    Current density distributions onY=0 m andX=0 m cross sections are shown in figure 11.As illustrated,the current intensity represents a small-gradient and large-volume distribution between the cathodes region and converged region.The large-volume current distribution leads to a large high temperature region due to Joule heat.The current intensity distribution is consistent with temperature distribution in figure 6.

    Figure 11.Current density distributions on Y=0 m and X=0 m cross sections.

    Figures 12 and 13 show the current line profiles for different cross sections.The current lines start from the anode and eventually reach the six cathodes.It is worth noting that in figure 12,a large portion of the current line from the anode does not directly reach the cathode,but instead concentrates at the center of the arc torch,and then the converged current lines flow to the six cathodes,respectively.This phenomenon can also be seen in figure 13,in the cross sections(d)and(e),where the current line flows to the center of the section,and in the sections(b)and(c),where the current line flows from the center to the periphery.This is due to convergence that occurs in the central region of the arc torch during the process of the current circulating from the anode to the cathode.

    Figure 12.Current line distributions on Y=0 m cross section.

    Figure 13.Current line distributions on different XY cross sections.

    3.2.Discussion of the mechanism of diffusion arc formation

    Here,research on the formation mechanism of high-temperature diffusion regions is studied.Figures 14 and 15 show the streamline and temperature field distributions for the cross sections ofZ=0 m andY=0 m,respectively.On the plane of the six cathode centers(as shown in figure 14,Z=0 m cross section),the streamlines are not only concentrated from the cathode to the central region,but also flow to the area between two cathodes,where the vortex is generated.The high-temperature gas flowing into the area between the two cathodes increases convective heat transfer effect,which promotes the merging of the temperature fields originating from the individual cathode jets.As shown in figure 15,it can be seen that some of the streamlines that converge to the center flow downstream of the cathode and the other part flows upstream in theZdirection.The gas heated by the cathode increases the high-temperature zone in theZdirection.The convective heat transfer is helpful for the convergence of the temperature fields originating from the individual cathode jets.

    Figure 14.Streamline and temperature distributions in Z=0 m cross section.

    Figure 15.Streamline and temperature distributions in Y=0 m cross section.

    The flow field characteristics in figures 14 and 15 can be attributed to electromagnetic effects.Figure 16 shows the Lorentz forces for the various cross-sections in theZdirection,in which(b),(c),(d)and(e)respectively correspond to the cross-sections noted in figure 5(a).Lorentz force on each arc is directed towards the central axis of the plasma torch and causes a common concentration effect for each of the six arcs.The Lorentz force is generated by an electromagnetic field,which mainly exists in the arc column channel from the cathode to the anode.Therefore,outside the arc column channel,the Lorentz force is very small.We do not show Lorentz force in the a and f cross sections.This can also be seen from the current density distribution on theY=0 m cross section,as shown in figure 17.Figure 17 displays the Lorentz force distribution over theY=0 m cross section.The strong Lorentz force generated near the cathodes is directed towards the upstream of the cathode and a portion is directed towards the downstream of the cathode.This results in convective heat transfer from the vicinity of the cathode to upstream and downstream of the cathode(figure 15).However,because the current path mainly exists in the region downstream of the cathode to the anode(as shown in figure 12),the Lorentz force near the cathode downstream is stronger than the force upstream,which causes the gas near the cathode to flow upstream,strengthening convective heat transfer in the cathode upstream,so there is also a convergence of high temperature areas upstream of the cathode,as shown in figure 6(a).

    Figure 16.Lorentz force distributions in different cross sections.

    Figure 17.Lorentz force distributions in Y=0 m cross section.

    Figures 18 and 19 display the flow field and streamline distribution for different cross sections,respectively.The flow field reveals that when gas flows from the inlet around the cathode into the interior of the multi-cathode plasma torch,eddy currents are formed between the two cathodes to allow the gas to fill the space near the inlet region which enhances the heat transfer of adjacent arc columns,further leading to the convergence of the six arcs.This process is shown in figures 14,18 and 19(b).Meanwhile,it can be seen from figure 19 that there is a low-velocity region in the downstream region of the intersection of the six arcs.This region is hardly affected by the convective heat transfer of the arc,but the electron and heavy particle temperatures in this region are very high.We can look to the current density distribution for the cause.Figure 11 shows that this low-velocity region is the exact intersection zone of the current channels,which indicates that the high-temperature region is mainly caused by the Joule heat of the arc.The above analysis results suggested that the large-volume high-temperature diffusion arc plasma inside the six-cathode plasma torch is the result of the combined action of convective heat transfer(figures 14 and 15)and Joule heat(figure 11).The diffused distribution of current plays an important role,followed by convection heat transfer.

    Figure 18.Velocity field and streamline distributions in Z=0 m cross section.

    Figure 19.Velocity field and streamline distributions in(a) Y=0 m and(b) X=0 m cross sections.

    4.Conclusion

    In this paper,the 3D two-temperature steady arc model was used to predict the temperature field,flow field and electromagnetic field distribution inside a multi-cathode plasma torch,and the formation mechanism of the large area hightemperature diffusion arc inside the plasma torch was analyzed.The simulated results were compared with the experimental results.In the case where the total current of the six cathodes was 240 A and the total intake flow rate was 1Nm3h-1,the numerical simulation results showed that:

    (1)Six cathode jets converge in the central region of arc chamber to form a high temperature diffusion arc in which the maximum electron temperature appears near the cathode and in the central converging region,while the maximum heavy particle temperature only appears in the central converging region.This phenomenon is in good agreement with the observed arc image in the experiment.

    (2)Near the cathode tip,due to the cooling of the inlet airflow and the compression of the Lorentz force,the arc column is in a contracted state.Slightly away from the cathode,the six arc columns begin to form a large area high temperature diffusion arc.In the center of the plasma torch,due to the convergence,the electron temperature and heavy particle temperature are significantly higher than in the surrounding area.Eventually,the interior of the plasma torch forms a stable large-scale high-temperature diffusion arc in all directions ofX,YandZ.At the same time,the calculated electron temperature distribution is in good agreement with the measured electron temperature in the experiment.

    (3)The arcs formed between the six cathodes and the anode are close to each other in each section of the plasma torch.This convergence phenomenon occurs not only in the downstream of the cathode but also in the upstream region of the cathode due to the Lorentz force promoting the flow field in the upstream and downstream convergence of the cathode.In each cross section in theZdirection,the Lorentz force on each arc is directed towards the central axis of the plasma torch and produces a common concentration effect for each of the six arcs.

    (4)The large-area,high-temperature and diffused arc inside the multi-cathode arc torch is a combined effect of Lorentz force,convection heat transfer and heat conduction.

    Acknowledgments

    The work is supported by National Natural Science Foundation of China(Nos.11875256,12005023,11705202),Scientific Research Fund Project of Anhui Jianzhu University(No.2020QDZ09)and Anhui Provincial Natural Science Foundation(No.1808085MA12).

    ORCID iDs

    猜你喜歡
    王城孫強
    魔鬼的王城
    Two-dimensional self-consistent numerical simulation of the whole discharge region in an atmospheric argon arc
    閱盡王城知桂林——獨秀峰·靖江王城
    孫強作品
    住、食、行——良渚王城之謎
    Generalized Hybrid Nanofluid Model with the Application of Fully Developed Mixed Convection Flow in a Vertical Microchannel?
    桂林師范大學與桂林王城、雁山園
    文史春秋(2017年10期)2017-11-29 01:31:40
    A scheme for improving computational efficiency of quasi-two-dimensional model*
    當經(jīng)理的爸爸
    偷來的靠山
    中文字幕久久专区| 国产亚洲欧美98| 精品熟女少妇av免费看| 亚洲人成网站在线播| 免费不卡的大黄色大毛片视频在线观看 | 如何舔出高潮| 国产精品女同一区二区软件| 成人三级黄色视频| 欧美高清成人免费视频www| 亚洲国产色片| 久久综合国产亚洲精品| 一进一出好大好爽视频| 欧美日韩综合久久久久久| 日韩欧美国产在线观看| 亚洲最大成人手机在线| 偷拍熟女少妇极品色| 国产一区二区三区av在线 | 国产v大片淫在线免费观看| 一区二区三区四区激情视频 | 精品福利观看| 最近最新中文字幕大全电影3| 一本久久中文字幕| 亚洲av美国av| 中文字幕av成人在线电影| 国产精品99久久久久久久久| 91精品国产九色| 一边摸一边抽搐一进一小说| 国产男人的电影天堂91| 亚洲精品亚洲一区二区| 国语自产精品视频在线第100页| 老司机福利观看| 国产精品爽爽va在线观看网站| 自拍偷自拍亚洲精品老妇| 国产探花在线观看一区二区| 乱系列少妇在线播放| 少妇的逼好多水| 日本与韩国留学比较| 亚洲最大成人中文| 精品久久久久久久久久久久久| 欧美zozozo另类| 亚洲美女视频黄频| 精品熟女少妇av免费看| av专区在线播放| 国产在线男女| 蜜桃亚洲精品一区二区三区| 欧美性感艳星| 美女大奶头视频| 亚洲国产精品合色在线| 成人亚洲精品av一区二区| av卡一久久| 久久久精品94久久精品| 97人妻精品一区二区三区麻豆| 国产毛片a区久久久久| 天堂网av新在线| 麻豆av噜噜一区二区三区| 久久久色成人| 69人妻影院| 深夜精品福利| 欧美又色又爽又黄视频| 人妻制服诱惑在线中文字幕| 观看免费一级毛片| 国产人妻一区二区三区在| 偷拍熟女少妇极品色| 国产精品国产三级国产av玫瑰| 人人妻,人人澡人人爽秒播| 我的老师免费观看完整版| 国产毛片a区久久久久| 老司机福利观看| 国模一区二区三区四区视频| 国产精品爽爽va在线观看网站| 最新中文字幕久久久久| 在线观看av片永久免费下载| 国产白丝娇喘喷水9色精品| 日韩精品青青久久久久久| 老熟妇乱子伦视频在线观看| 国产在线男女| 尤物成人国产欧美一区二区三区| 又爽又黄无遮挡网站| 日韩 亚洲 欧美在线| 国产成人影院久久av| 久久韩国三级中文字幕| 天美传媒精品一区二区| 亚洲国产欧美人成| 国产亚洲91精品色在线| 亚洲av免费在线观看| 亚洲综合色惰| 丰满的人妻完整版| 国产精品av视频在线免费观看| 一级a爱片免费观看的视频| 男女啪啪激烈高潮av片| 亚洲欧美精品自产自拍| 国产视频一区二区在线看| 一个人看的www免费观看视频| 欧美+日韩+精品| 18+在线观看网站| 午夜视频国产福利| 亚洲欧美日韩高清在线视频| 久久精品国产鲁丝片午夜精品| 老司机福利观看| 欧美3d第一页| 久久精品国产99精品国产亚洲性色| 麻豆乱淫一区二区| 夜夜夜夜夜久久久久| 老司机影院成人| 亚洲国产精品成人久久小说 | 国产一区二区亚洲精品在线观看| avwww免费| 国产不卡一卡二| 国产男靠女视频免费网站| 亚洲国产日韩欧美精品在线观看| 亚洲成人中文字幕在线播放| 国内少妇人妻偷人精品xxx网站| 日韩在线高清观看一区二区三区| 一进一出好大好爽视频| av在线蜜桃| 成年女人看的毛片在线观看| 国产熟女欧美一区二区| 日本-黄色视频高清免费观看| 你懂的网址亚洲精品在线观看 | 日韩欧美免费精品| 超碰av人人做人人爽久久| 听说在线观看完整版免费高清| 狂野欧美激情性xxxx在线观看| 我要看日韩黄色一级片| 亚洲最大成人av| 免费观看人在逋| 国产黄色小视频在线观看| 最近视频中文字幕2019在线8| 国产精品女同一区二区软件| 欧美zozozo另类| 日韩欧美精品免费久久| 性欧美人与动物交配| 亚洲不卡免费看| 亚洲国产精品久久男人天堂| 午夜福利成人在线免费观看| 晚上一个人看的免费电影| 极品教师在线视频| 国产v大片淫在线免费观看| 亚洲一区高清亚洲精品| 干丝袜人妻中文字幕| 极品教师在线视频| 又爽又黄a免费视频| 中文字幕久久专区| 成人一区二区视频在线观看| 精品国内亚洲2022精品成人| 99热精品在线国产| 中文字幕人妻熟人妻熟丝袜美| 国产精品永久免费网站| 又爽又黄a免费视频| 久久久久久久亚洲中文字幕| 老师上课跳d突然被开到最大视频| 国产精品永久免费网站| 观看免费一级毛片| 99精品在免费线老司机午夜| 99热这里只有是精品50| 中文字幕人妻熟人妻熟丝袜美| 国产久久久一区二区三区| 中出人妻视频一区二区| aaaaa片日本免费| 国产视频内射| 啦啦啦啦在线视频资源| 最新在线观看一区二区三区| 精品久久久久久成人av| 午夜福利成人在线免费观看| 蜜桃久久精品国产亚洲av| 狂野欧美白嫩少妇大欣赏| a级毛片a级免费在线| 国产高清视频在线观看网站| 免费高清视频大片| 在线观看美女被高潮喷水网站| 观看美女的网站| 嫩草影院入口| 日本一二三区视频观看| 久久国内精品自在自线图片| 午夜精品在线福利| 亚洲国产精品成人久久小说 | 狠狠狠狠99中文字幕| 岛国在线免费视频观看| 久久韩国三级中文字幕| 精品久久久久久久末码| 最近手机中文字幕大全| 午夜爱爱视频在线播放| 能在线免费观看的黄片| 久久人人爽人人片av| 女人被狂操c到高潮| 女的被弄到高潮叫床怎么办| 亚洲第一电影网av| 国产高清三级在线| 久久久精品大字幕| 十八禁国产超污无遮挡网站| 久久久精品大字幕| 精品久久久久久久人妻蜜臀av| 可以在线观看毛片的网站| 可以在线观看毛片的网站| 91在线观看av| 大香蕉久久网| 亚洲av五月六月丁香网| 国产白丝娇喘喷水9色精品| 午夜福利高清视频| av在线观看视频网站免费| eeuss影院久久| 亚洲熟妇中文字幕五十中出| 亚洲精品国产成人久久av| 激情 狠狠 欧美| 亚洲aⅴ乱码一区二区在线播放| 99国产精品一区二区蜜桃av| 99riav亚洲国产免费| aaaaa片日本免费| 久久久久精品国产欧美久久久| 成人综合一区亚洲| 中文资源天堂在线| 一个人看的www免费观看视频| 全区人妻精品视频| 一进一出抽搐gif免费好疼| 91av网一区二区| 久久久久久伊人网av| 长腿黑丝高跟| a级毛片a级免费在线| 亚洲高清免费不卡视频| av女优亚洲男人天堂| 欧美成人免费av一区二区三区| 国产在视频线在精品| 亚洲人成网站在线观看播放| 国产精品国产高清国产av| 全区人妻精品视频| 亚洲精品日韩在线中文字幕 | 精品一区二区三区视频在线观看免费| 亚洲av五月六月丁香网| 高清午夜精品一区二区三区 | 看十八女毛片水多多多| 中文亚洲av片在线观看爽| 神马国产精品三级电影在线观看| 亚洲熟妇中文字幕五十中出| 亚洲五月天丁香| 午夜精品在线福利| 少妇熟女欧美另类| 精品午夜福利视频在线观看一区| 精品久久久久久成人av| 久久久久久久久久久丰满| 精品一区二区三区av网在线观看| 久久久久免费精品人妻一区二区| 久久久久国产网址| 日本成人三级电影网站| 亚洲激情五月婷婷啪啪| 国产不卡一卡二| 香蕉av资源在线| 综合色av麻豆| 一级毛片我不卡| 性欧美人与动物交配| 老女人水多毛片| 日韩成人伦理影院| av天堂中文字幕网| 久久精品人妻少妇| 99热网站在线观看| or卡值多少钱| 国产精华一区二区三区| 久久精品国产99精品国产亚洲性色| 久久久精品大字幕| 两性午夜刺激爽爽歪歪视频在线观看| 寂寞人妻少妇视频99o| 搡老岳熟女国产| 国产一区二区激情短视频| 一边摸一边抽搐一进一小说| 国产精品伦人一区二区| 啦啦啦观看免费观看视频高清| 91狼人影院| 99久久久亚洲精品蜜臀av| 九九久久精品国产亚洲av麻豆| 激情 狠狠 欧美| 精品人妻熟女av久视频| 国产aⅴ精品一区二区三区波| 中文字幕人妻熟人妻熟丝袜美| 精品一区二区三区av网在线观看| 日韩国内少妇激情av| 寂寞人妻少妇视频99o| 欧美bdsm另类| 噜噜噜噜噜久久久久久91| 免费观看的影片在线观看| 欧美极品一区二区三区四区| 国产精品野战在线观看| 免费观看在线日韩| 国产不卡一卡二| 久久久精品欧美日韩精品| 精品欧美国产一区二区三| 亚洲av不卡在线观看| 国产av麻豆久久久久久久| 在线天堂最新版资源| 少妇丰满av| av视频在线观看入口| 免费看日本二区| 日韩欧美在线乱码| 国产精品久久久久久久电影| 91av网一区二区| 变态另类丝袜制服| 精品久久久久久久末码| 在线免费观看不下载黄p国产| 午夜久久久久精精品| 久久久久国产精品人妻aⅴ院| 免费看a级黄色片| 久久精品影院6| 性色avwww在线观看| 99热全是精品| 国内精品久久久久精免费| 久久久久国产精品人妻aⅴ院| 一进一出抽搐gif免费好疼| 美女大奶头视频| 丰满乱子伦码专区| 午夜福利视频1000在线观看| 亚洲欧美精品综合久久99| 伦精品一区二区三区| 日本黄大片高清| 深夜a级毛片| 日本精品一区二区三区蜜桃| 亚洲欧美日韩卡通动漫| 韩国av在线不卡| 啦啦啦观看免费观看视频高清| 国产精品亚洲一级av第二区| eeuss影院久久| 哪里可以看免费的av片| 18禁裸乳无遮挡免费网站照片| 午夜久久久久精精品| 国产精品国产高清国产av| 国产真实伦视频高清在线观看| 国国产精品蜜臀av免费| 18禁裸乳无遮挡免费网站照片| 久久久久久久久久久丰满| 黄色配什么色好看| 亚洲av中文av极速乱| 天堂√8在线中文| 一本久久中文字幕| 国产大屁股一区二区在线视频| 网址你懂的国产日韩在线| 在线观看一区二区三区| av视频在线观看入口| 成人亚洲精品av一区二区| 久久久精品大字幕| 久久久久免费精品人妻一区二区| 在线观看免费视频日本深夜| 我的老师免费观看完整版| 亚洲自偷自拍三级| 国产欧美日韩一区二区精品| 午夜精品一区二区三区免费看| 免费av不卡在线播放| 色综合亚洲欧美另类图片| 日韩高清综合在线| 老女人水多毛片| 欧美日韩综合久久久久久| 成人国产麻豆网| 欧美zozozo另类| 亚洲美女搞黄在线观看 | 波多野结衣高清作品| 日韩欧美精品免费久久| 尤物成人国产欧美一区二区三区| 中文字幕av成人在线电影| 深爱激情五月婷婷| 能在线免费观看的黄片| 亚洲四区av| 一个人观看的视频www高清免费观看| 国产成年人精品一区二区| 国产三级中文精品| 欧美区成人在线视频| 国产伦精品一区二区三区四那| 国产午夜精品论理片| 日韩一本色道免费dvd| 国产一区二区激情短视频| 韩国av在线不卡| 天天一区二区日本电影三级| 亚洲精品粉嫩美女一区| 亚洲久久久久久中文字幕| 在线观看66精品国产| 91麻豆精品激情在线观看国产| 国产高清有码在线观看视频| 亚洲精品456在线播放app| 日本熟妇午夜| 久久久久久久久久黄片| 久久午夜亚洲精品久久| av专区在线播放| av中文乱码字幕在线| 丝袜美腿在线中文| 亚洲美女搞黄在线观看 | а√天堂www在线а√下载| 精品99又大又爽又粗少妇毛片| 国产精品1区2区在线观看.| 国产精品,欧美在线| 日本欧美国产在线视频| 真人做人爱边吃奶动态| 亚洲精品一区av在线观看| 一个人免费在线观看电影| 亚洲av电影不卡..在线观看| av.在线天堂| 少妇的逼好多水| 日本撒尿小便嘘嘘汇集6| 欧美+日韩+精品| 3wmmmm亚洲av在线观看| 97热精品久久久久久| 老女人水多毛片| 永久网站在线| 看十八女毛片水多多多| 久久精品国产自在天天线| 最后的刺客免费高清国语| 日韩大尺度精品在线看网址| 又粗又爽又猛毛片免费看| 国产一区二区三区在线臀色熟女| 欧美成人免费av一区二区三区| 看十八女毛片水多多多| 我的女老师完整版在线观看| 熟女人妻精品中文字幕| 欧美日本视频| 五月伊人婷婷丁香| 美女内射精品一级片tv| 亚洲av成人精品一区久久| 寂寞人妻少妇视频99o| 免费高清视频大片| 成人性生交大片免费视频hd| 国产在线男女| 午夜福利18| 少妇猛男粗大的猛烈进出视频 | 日日啪夜夜撸| 日韩欧美免费精品| 九九爱精品视频在线观看| 亚洲中文字幕一区二区三区有码在线看| 女生性感内裤真人,穿戴方法视频| 欧美色欧美亚洲另类二区| 国内精品一区二区在线观看| 久久久久久久久大av| 别揉我奶头~嗯~啊~动态视频| 在线国产一区二区在线| 18禁黄网站禁片免费观看直播| 久久天躁狠狠躁夜夜2o2o| 老女人水多毛片| 天天躁夜夜躁狠狠久久av| 偷拍熟女少妇极品色| 高清毛片免费看| 我的老师免费观看完整版| 欧美性猛交╳xxx乱大交人| 99热这里只有精品一区| 悠悠久久av| 深爱激情五月婷婷| 直男gayav资源| 日韩人妻高清精品专区| 成人午夜高清在线视频| 亚洲av成人精品一区久久| 日产精品乱码卡一卡2卡三| 欧美在线一区亚洲| 国产精品野战在线观看| 国产高清激情床上av| 午夜爱爱视频在线播放| 国产伦一二天堂av在线观看| 亚州av有码| 在线免费观看不下载黄p国产| 国产精品1区2区在线观看.| 亚洲精品国产成人久久av| 午夜精品国产一区二区电影 | 黑人高潮一二区| 麻豆精品久久久久久蜜桃| 国产高清不卡午夜福利| 国产中年淑女户外野战色| 看黄色毛片网站| 久久久久久久久大av| 国产亚洲欧美98| 国产午夜福利久久久久久| 国产一区二区三区在线臀色熟女| 99久久成人亚洲精品观看| 此物有八面人人有两片| 亚洲精品影视一区二区三区av| 亚洲中文日韩欧美视频| 久久精品国产亚洲av香蕉五月| 免费在线观看成人毛片| 国产熟女欧美一区二区| 乱人视频在线观看| 十八禁国产超污无遮挡网站| 国产一区二区三区av在线 | videossex国产| 人人妻人人看人人澡| 亚洲精品色激情综合| 亚洲欧美精品综合久久99| 蜜臀久久99精品久久宅男| av卡一久久| 91在线观看av| 国产成人91sexporn| 久久久久性生活片| 日本黄色视频三级网站网址| 日韩成人av中文字幕在线观看 | 精品国产三级普通话版| 亚洲国产色片| 成年版毛片免费区| 舔av片在线| 天堂网av新在线| 一a级毛片在线观看| 狂野欧美白嫩少妇大欣赏| 变态另类成人亚洲欧美熟女| 我要搜黄色片| 精品国内亚洲2022精品成人| 成人三级黄色视频| 国产精品一区www在线观看| .国产精品久久| 综合色丁香网| 可以在线观看毛片的网站| 九九久久精品国产亚洲av麻豆| aaaaa片日本免费| 日本黄大片高清| 免费人成视频x8x8入口观看| 18+在线观看网站| 波多野结衣高清作品| 日本三级黄在线观看| 欧美+亚洲+日韩+国产| 美女cb高潮喷水在线观看| 国产毛片a区久久久久| a级毛片a级免费在线| 大又大粗又爽又黄少妇毛片口| 国产高清激情床上av| 成年免费大片在线观看| 免费观看在线日韩| 嫩草影院入口| 日韩,欧美,国产一区二区三区 | av在线老鸭窝| 最新中文字幕久久久久| 夜夜夜夜夜久久久久| 国产精品一区二区性色av| 午夜老司机福利剧场| 国产探花极品一区二区| 丰满乱子伦码专区| 成人综合一区亚洲| 日日撸夜夜添| 亚洲美女搞黄在线观看 | 国产成人aa在线观看| 午夜福利在线观看免费完整高清在 | av卡一久久| 97超碰精品成人国产| 国产男人的电影天堂91| 老师上课跳d突然被开到最大视频| 国产三级在线视频| 欧美xxxx性猛交bbbb| av在线蜜桃| 亚洲精品久久国产高清桃花| 日韩精品中文字幕看吧| 久久综合国产亚洲精品| 亚洲在线观看片| 国产精品一及| 日本在线视频免费播放| av国产免费在线观看| 欧美丝袜亚洲另类| 国产乱人视频| 午夜福利视频1000在线观看| 一级黄色大片毛片| 一个人观看的视频www高清免费观看| 国产探花极品一区二区| 舔av片在线| 国产亚洲精品综合一区在线观看| 国产国拍精品亚洲av在线观看| 老女人水多毛片| 亚洲欧美成人综合另类久久久 | 欧美日韩在线观看h| 麻豆精品久久久久久蜜桃| 国内少妇人妻偷人精品xxx网站| 禁无遮挡网站| 亚洲色图av天堂| 日韩av在线大香蕉| 少妇熟女aⅴ在线视频| 亚洲性夜色夜夜综合| 国内精品久久久久精免费| av免费在线看不卡| 直男gayav资源| 热99在线观看视频| 亚洲av不卡在线观看| 日本与韩国留学比较| 日本撒尿小便嘘嘘汇集6| 国产精品久久久久久亚洲av鲁大| 亚洲成人久久爱视频| 亚洲成人久久性| 午夜精品在线福利| 麻豆久久精品国产亚洲av| 久久国内精品自在自线图片| 日本黄色视频三级网站网址| 高清毛片免费观看视频网站| 国产视频一区二区在线看| 亚洲婷婷狠狠爱综合网| 亚洲av二区三区四区| 色播亚洲综合网| 网址你懂的国产日韩在线| av在线播放精品| 黄色配什么色好看| 欧美zozozo另类| 白带黄色成豆腐渣| 亚洲aⅴ乱码一区二区在线播放| 免费无遮挡裸体视频| 天天躁日日操中文字幕| 婷婷精品国产亚洲av| 六月丁香七月| 一级黄色大片毛片| 午夜福利在线观看吧| 在线观看免费视频日本深夜| 一本久久中文字幕| 色综合色国产| 69人妻影院| 亚洲最大成人中文| 一夜夜www| 内射极品少妇av片p| 91久久精品国产一区二区三区| 可以在线观看毛片的网站| 国产亚洲91精品色在线| 十八禁国产超污无遮挡网站| 搡女人真爽免费视频火全软件 | 最近最新中文字幕大全电影3| 菩萨蛮人人尽说江南好唐韦庄 | 少妇猛男粗大的猛烈进出视频 | 日韩国内少妇激情av| 日韩欧美免费精品| 91在线观看av| 免费看美女性在线毛片视频| 看黄色毛片网站| 亚洲性夜色夜夜综合| 久久久久久久久久成人| 日本a在线网址| 国产毛片a区久久久久|