• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    金屬硫化物基鉀離子電池負極:儲存機制和合成策略

    2022-11-24 11:16:32杜憶忱張壯壯徐一帆包建春周小四
    物理化學學報 2022年11期
    關鍵詞:建春南京師范大學材料科學

    杜憶忱,張壯壯,徐一帆,包建春,周小四

    南京師范大學化學與材料科學學院,南京 210023

    1 Introduction

    Advanced large-scale energy storage technology is urgently needed for the efficient and diversified utilization of new energy in the new era1–4. However, lithium resources, the raw material vital to the development of this technology, are highly limited and unevenly distributed in the crust, restraining the growth of large-scale energy storage and electric vehicle technology5–8. By contrast, potassium ion, with similar chemical property and storage mechanism to that of lithium ion, is abundant in the earth’s crust and more widely distributed9,10. Therefore, the development of low-cost potassium-ion batteries (PIBs) are of great importance to the application of large-scale energy storage and smart grid11–14.

    Anode materials help break the performance bottlenecks of high-performance batteries, thus becoming the key to the development of these batteries15,16. However, due to the large ion size of K+, the repeated potassiation/depotassiation in the bulk phase of anode will lead to the collapse of the ion structure.Hence, many anodes with high theoretical capacity eventually display poor cycle and rate performance during the charge/discharge process17–20. Therefore, to design anodes with long cycle life and fast discharge/charge process and to obtain high-energy-density and high-power-density PIBs are now the core issues to be addressed21–24.

    PIB anodes have four reaction mechanisms, including intercalation/deintercalation reaction (hard carbon)25–28,conversion reaction (Fe2O3, FeS2, FeSe2, NiSe2, etc.)29,30,alloying reaction (red phosphorus, antimony, germanium, tin,etc.)31,32and conversion-alloying reaction process (GeO2, SnO,SnS2, SnSe2, GeSe2, etc.)33,34. Theoretically, anodes based on the conversion reaction and conversion-alloying reaction mechanisms have smaller volume expansion during cycling than the alloying-type anodes, whereas their capacity (larger than 400 mAh·g?1) is larger than the intercalation-type anodes35–37. Metal chalcogenides (MCs) follow the conversion or conversion-alloy mechanism in the process of potassium storage, indicating their great potential for K+storage38–41.

    MCs mainly include metal sulfides, selenides and tellurides,among which metal sulfides (MSs) have been widely used in the research of lithium-ion and sodium-ion batteries due to their high theoretical specific capacity and low potential42–45. They are also highly promising for PIBs. Moreover, compared with metal oxides of the same family, the larger ionic radius of S makes the M?S bond weaker than the M?O bond, contributing to better electronic conductivity and lower ion diffusion barriers46–48.Nevertheless, the practical application of MSs anodes is also limited. For example, the electrical conductivity of this material is still not satisfactory enough, and the by-product polysulfides generated during the charge/discharging undergo dissolution and shuttle effects, resulting in the loss of active materials. In addition, the volume of the material structure expands and shrinks drastically during cycling, which makes the active components pulverize and fall off, eventually leading to rapid capacity decline and low cycle stability44,49–51.

    Through the research of the specific potassium storage mechanism and reaction kinetics process of MS anodes, the indepth analysis of the challenges the material currently faces, and the rational design of the synthesis methods of metal sulfides or metal sulfide-based composites with unique structures (such as core-shell, porous and hollow structure), the disadvantages of MSs can hopefully be overcome and the anode materials with excellent electrochemical performance can finally be obtained.In this review, research on K+storage mechanisms, relevant problems and synthesis methods of MSs as the PIB anodes are summarized (Fig. 1). Considering the existing reviews on MSs for PIBs, this review mainly focuses on the synthetic methodology of the unique-structure MSs with superior K ion storage capacity. More research on these methods is also needed to implement the mass production and practical application of MSs in the future.

    Fig. 1 Schematic illustration of typical reaction mechanism and synthesis of metal sulfide-based PIB anodes.

    2 Potassium storage mechanisms of MSs

    There are four reaction mechanisms of metal sulfide anodes:intercalation/extraction reaction, conversion reaction, alloying reaction and conversion-alloying reaction. At the beginning of discharge, potassium ions intercalate into the bulk structure of the MSs, which exists in both layered and non-layered sulfide anodes52–54. During further discharge, there is sufficient space between layers of the layered MSs to accommodate a large amount of potassium ions. Hence, the intercalation reaction mechanism is mainly followed. Furthermore, this process changes the oxidation state of the metal, but has little effect on its structural framework. In contrast, there are two situations of the reactions of non-layered MSs. For sulfides in which the metal is electrochemically inactive (such as MoS2, FeS2, ZnS, and V5S8)55–60, conversion reactions happen during further discharge. Metal sulfides react with K+to form metal element and thermodynamically stable potassium sulfide. For MSs in which the metal is electrochemically active (mainly Ge, Sn, Sb,and Bi sulfides)61–65, the conversion and alloying reaction happen in sequence, and finally potassium sulfide and intermetallic compound KxMywith different stoichiometric ratios are formed. Due to the additional alloying storage process,this kind of material shows higher theoretical specific capacity.However, since the crystal structures formed by different elements are very different, these crystals undergo structural remodeling accompanied by a large volume expansion upon KxMyformation. At the same time, the formation of KxMyin crystalline materials also leads to uneven volume changes in the two-phase boundary region, resulting in the cracking or pulverization of the active particles, which eventually causes the contact loss between the active particles and the conductive additives and the sharp decrease of the reversible capacity.Therefore, it can be concluded that MSs with alloying reaction processes tend to exhibit poor cycling performance.

    The detailed reaction processes of PIBs anodes vary with their crystal phases, structures and depths of discharge. The specific reaction process tends to be more complex. For example, Qin et al.66prepared an organic-inorganic composite material,PASP@SnS2@CN, as the anode of PIBs and investigated its potassium storage mechanism in the voltage range of 0.01–3 V by in situ X-ray diffraction (XRD). The results showed that the anode underwent a total of six stages and ten steps upon K+insertion/extraction. During the discharge process, the reactions lasted through stages 1 (3.0–1.25 V, 5SnS2+ 2K++ 2e?= K2S5+5SnS), 2 (1.25–0.55 V, K2S5+ 8K++ 8e?= 5K2S, SnS + 2K++2e?= K2S + α-Sn), and 3 (0.55–0.01 V, 23Sn + 4K++ 4e?=K4Sn23, K4Sn23+ 19K++19e?= 23KSn), including multi-step conversion and alloying reactions. During the charging process,the reaction proceeded reversibly, and the discharge products were consumed to regenerate the original materials. The abovementioned processes lasted through stages 4, 5, and 6,respectively. The weakened diffraction peaks of SnS2and SnS indicated that the reaction was partially reversible.

    3 Challenges

    Despite the impressive progress made, the research of MSs is still emerging and there are many issues to tackle. The main challenges faced by current MS anodes can be concluded into the following five aspects67,68

    (1) The dissolution of polysulfide and shuttle effects:potassium polysulfides are formed during the deep potassiation process in most metal sulfides, which can deteriorate the electrochemical performance of the material because of the dissolution of polysulfides in electrolyte and detrimental shuttle effects. The dissolution of polysulfides causes the loss of active materials, eventually resulting in poor reversibility. Shuttle effects refer to the migration of the dissolved polysulfide to K metal and its reaction with K to generate K2S, which not only block K+diffusion channels but also lead to the loss of MSs in the half-cell, thus decreasing the capacity, lowering the columbic efficiency and shortening the cycle life.

    (2) Sluggish charge and ion transfer kinetics: MSs possess relatively low ion-diffusion coefficient and electronic conductivity. Owing to the large size of K+, these problems are especially aggravated when MSs are used as anodes for PIBs,giving rise to sluggish reaction kinetics, low utilization efficiency of active sites as well as large electrochemical polarization. As a consequence, obvious capacity decrease can be detected at high rates in the test.

    (3) Severe volume variations during cycling: The electrode materials undergo volume expansion resulting from the largesized K ions during potassiation/depotassiation cycles. It has been reported that graphite has ~61% volume change after potassiation, which is six times larger than that after lithiation.The MS anodes undergoing alloying reactions show much greater volume variations upon cycling with ~400% for Sb2S3and ~681% for Sn4P3. Such continuous huge volume changes upon cycling bring about irreversible phase change, destruction of the SEI and pulverization and delamination of the electrode from the current collector, leading to capacity fading in the end.

    (4) Serious side reactions: Solvents in the electrolyte are easily reduced on the surface of the anode due to the low voltage of K+/K. This leads to the consumption of the electrolyte and even the drying out of the electrolyte after long-term cycling,dramatically intensifying the electrode polarization and decreasing the cycling stability of the anode.

    (5) Instable SEI layer: The repeated volume expansion and contraction destroy the existing SEI produced from initial stages.The exposed MSs react with K ions to generate a new SEI layer,which aggravate the consumption of K ions and the related side reactions, thereby lowering the coulombic efficiency of electrode. Moreover, the low ionic conductivity and poor mechanical ductility of SEI is another problem of MSs.

    4 Synthesis of metal sulfides

    Recent progress of the fabrication of MSs for PIBs is summarized into five categories: template synthesis,hydro/solvothermal synthesis, solid-phase chemical synthesis,electrospinning synthesis, and ion-exchange synthesis69–71. By adjusting relevant parameters, various methods can be applied to design the structure, composition, particle size, atomic-level and heterostructure of the synthesized materials and engineer the 1D/2D/3D materials and MSxcomposites (MSx/graphite,MSx/carbonaceous, MSx/metal sulfides, MSx/metal oxides and ternary composites) with heteroatom doping, vacancy and/or expanded interlayer spacing, therefore improving the potassiumion storage properties67.

    4.1 Template synthesis

    The template method is the most popular one for the fabrication of MS anodes for PIBs. It can change the size,morphology and structure of nanomaterials thanks to the spatial confinement effect of the templates. It can also effectively alleviate the agglomeration of nanomaterials72. The template method can be mainly divided into hard and soft ones according to different properties of the template. The hard template maintains its specific structure by covalent bonds, mainly represented by anodized aluminum oxide (AAO), porous silicon,SiO2nanospheres, and polystyrene (PS). Compared with the hard template, the soft template cannot strictly control the shape and size of the product, but it has the advantages of various structures, simple operation and low cost. Soft templates are mainly bound by intermolecular or intramolecular soft forces.Common soft templates include biological macromolecules,surfactants, liquid crystals, micelles and so on. Over the past years, many researchers have used template method to prepare MSs as the anode for PIBs73,74. For example, few-layered V5S8nanosheets wrapping a hollow carbon sphere were fabricated via a facile hollow carbon template induced method54. V5S8, with its lamellar structure, has been considered as a good host for K+because of its super interlayer spacing (1.132 nm) and metallic property. Nevertheless, since traditional liquid exfoliation technique is time-consuming and unproductive, Li and his coworkers utilized hollow carbon as a template to induce the formation of VS4particles and meanwhile prevented them from aggregating. The synthesized particles were then converted to ultrathin few-layered V5S8in the subsequent calcination. Due to the synergistic effect between V5S8and hollow carbon which leads to the ultrathin nanosheet structure, superior reaction kinetics and reversible phase transformation during cycling,such hollow carbon-templated 2D V5S8nanosheets are regarded as the promising material for high-performance PIBs.

    Compared with the traditional soft and hard template methods,the template in the self-template method not only supports the frame, but also directly participates in the formation of nanomaterials. Therefore, the self-template method features fewer reaction steps, less template required, advantageous nanostructure design and better component optimization77–80. In the application of this method, MoO3-EDA nanowires were used as the template for Mo2S anodes75. As can be seen in Fig. 2a–d,initially, the MoO3-EDA nanowires were fabricated according to previous literature. Then, E-MoS2/PC TC was produced by consuming the self-template of MoO3-EDA nanowires. The final composite displayed a tubular structure composed of interlayer expanded MoS2–N/O doped carbon composite (E-MoS2/NOC TC) (Fig. 2e). Thanks to its tubular morphology, interlayer expanded nanosheets and N/O doped carbon framework, the EMoS2/NOC TC anode delivered long cycle performance (220 mAh·g?1after 300 cycles at 250 mA·g?1) (Fig. 2f). Furthermore,template method has been reported as a simple and effective method to prepare hollow or porous structures. Li et al.76reported a surface-confined strategy to constrain SnS2in selfgenerated porous carbon networks with reduced graphene oxide(rGO) shell (SnS2@C@rGO) (Fig. 2h–k). The annealing process from disodium stannous citrate (DSC) to Sn@C@rGO particles is shown in Fig. 2g. The released CO2gas (conventional porecreating reagent) created micropores and mesopores on the carbon matrix, while the removal of Na2CO3(hard template)introduced meso- and macropores. The gas-sorption studies were used to evaluate the pore structure (Fig. 2l). The result showed that SnS2@C@rGO-3 had a high specific surface area of 16.02 m2, which facilitated the penetration of electrolyte and the transport of ions, thus improving the rate capability of SnS2@C@rGO-3 (Fig. 2m, n).

    Fig. 2 (a) Schematic illustration of the fabrication of E-MoS2/NOC TC. FESEM images of (b) MoO3-EDA and (d) E-MoS2/NOC TC.(c) Diagram of K+ diffusion and electron transfer in E-MoS2/NOC TC. (e) TEM and HRTEM images of E-MoS2/NOC TC (the inset is the corresponding SAED pattern). (f) Long cycling performance of E-MoS2/NOC TC at 250 mA·g?1 75. Copyright 2019, The Royal Society of Chemistry. (g) Synthesis procedure for SnS2@C and SnS2@C@rGO-x (white ball: sodium carbonate). SEM images of(h) Sn@C, (i) SnS2@C, (j) Sn@C@rGO-3, and (k) SnS2@C@rGO-3. (l) Nitrogen adsorption-desorption isotherms of SnS2@C and SnS2@C@rGO-3. (m) Contribution ratios of the surface-driven processes in the SnS2@C@rGO-3 electrode at various scan rates.(n) Rate capability and subsequent cycling stability of the SnS2@C@rGO-3 electrode at 100 mA·g?1 76. Copyright 2019, Wiley-VCH.

    Metal-organic frameworks (MOFs) are a class of crystals with porous network structures bridged by metal ions and organic ligands. There are abundant pores inside the MOFs material,which lead to large specific surface area, adjustable pore structure and remarkable structure diversity83–86. The MOF-derived materials inherit its porous network structure from the preparing process, where the MOFs not only react to produce the target product, but also serve as templates and the source of carbon87,88. Zeng and his coworkers81reported a ZIF-67@CNT derived carbon-coated CoSx@CNT material (CCS@CNT),where the carbon nanotubes were interconnected with each other(Fig. 3a–c). The copious pores of CoSxand the channels generated from the interconnected composite networks enabled CCS@CNT to possess a large specific surface area of 147 m2·g?1(Fig. 3d). Hence, CCS@CNT exhibited prominent rate property,with the specific capacity of 585, 424, 376, 330, and 296 mAh·g?1at 50, 100, 200, 500 and 1000 mA·g?1, respectively. The composite could also achieve 341 mAh·g?1after 70 cycles when the current density increased again to 500 mA·g?1, without distinct capacity loss (Fig. 3e). Additionally, Yang et al.89investigated the K+storage of NiS2hybrid for the first time. By sulfurating and carbonizing the Ni-precursor (self-template),hierarchical flower-like NiS2impregnated within N-doped carbon (NiS2@C@C) was synthesized. Since the carbon layer effectively alleviates the volume expansion of the material and further promotes the electronic conductivity and the transfer of K+, it is not surprising that the NiS2@C@C anode shows impressive potassium storage performance.

    It is well known that the heterostructure can optimize each individual component and achieve the effect of 1 + 1 > 2. It also provides sufficient active interface to accelerate the charge transport and enhance the electrochemical property90–92.According to Zhang et al.82, Ni3S2-Co9S8heterostructures with an open-ended nanocage structure confined in reduced graphene oxide (Ni-Co-S@rGO cages) were accurately engineered.During the synthesis procedure, Ni-Co-PBA nanocages, attained by selectively etching Ni-Co-PBA nanocubes with ammonia(NH3), were used as the self-template. The final product inherited the structure of the nanocage template after the following carbon coating, vulcanization and carbonization processes. This unique composite was featured with special open-ended nanocage structure, copious heterointerfaces and rGO wrapping (Fig. 3f–h). As for its application in PIBs, the Ni-Co-S@rGO anode delivered extraordinary cycle stability with the specific capacity of 348 mAh·g–1over 2000 cycles at 10 A·g?1(Fig. 3i). Moreover, Luo et al.93constructed an N-doped-carbon-coated CoS@SnS heterostruture (CSS@NC) via a lowcost and simple template method. The cyclability and rate capacity of CSS@NC were much better than SS@NC (N-dopedcarbon-coated SnS) because of the internal electric field at heterointerfaces between CoS and SnS.

    Fig. 3 (a) The fabrication process, (b) SEM image, (c) TEM images and (d) N2 adsorption-desorption isotherms of CCS@CNT. (e) Rate capability of CCS@CNT, CCS/CNT and CCS at various current density 81. Copyright 2022, Wiley-VCH. (f) Schematic illustration of the Ni-Co-S@rGO cage nanohybrids. SEM photos of (g) Ni-Co-PBA nanocages and (h) Ni-Co-PBA@GO cage nanohybrids.(i) Ultralong cycle stability of the Ni-Co-S@rGO electrode at 10 A·g–1 after 2000 cycles 82. Copyright 2022, Wiley-VCH.

    4.2 Hydro/solvothermal synthesis

    Hydro/solvothermal synthesis, as one of the most famous wetchemical synthesis strategy, is widely used in preparing nanomaterials. It refers to the synthesis technology using chemical reaction of substances in solution at a certain temperature (100–1000 °C) and pressure (1–100 MPa), which can provide a special physical and chemical environment for the reaction and crystallization of various precursors that cannot be obtained under normal pressure conditions. The solvothermal method is developed on the basis of the hydrothermal method,and it differs from the hydrothermal reaction in that the solvent used is organic instead of water78. The hydrothermal method is only suitable for the preparation and treatment of oxide functional materials and a few water-insensitive chalcogenides,whereas other water-sensitive (reaction with water, hydrolysis,decomposition or instability) compounds can be obtained via solvothermal methods, such as III-V group semiconductors,carbides and fluorides. In the hydro/solvothermal synthesis, the morphology, structure and particle size of nanomaterials can be controlled, and the obtained product features high crystallinity and remarkable particle size dispersion94,95.

    Take the carbon-free crystal-like Fe1?xS developed by Wu et al.96as an example. It was synthesized via a facile solvothermal method, and its K+storage performance was investigated afterwards. Fig. 4a–e demonstrates the morphological evolution process of the Fe1?xS precursor. As the reaction time increased from 6 to 36 h, the structure of the sample changed from multiangular quasispherical to a crystal with numerous glitches on each branch. The size of the crystal and the length of the glitches gradually increased, which complied with an Ostwald ripening process. Such a special structure provided sufficient surface sites for potassium ion storage and decreased transport length for electron/ion. Meanwhile, the low tapping density caused by carbon modification was overcome efficiently. The obtained Fe1?xS anode delivered outstanding electrochemical properties in terms of high specific capacity, long-term cycle life and high rate capacity (Fig. 4f).

    Fig. 4 Low-magnification SEM images of the precursors of Fe1?xS attained with different reaction times: (a) 6 h, (b) 12 h, (c) 24 h, and (d) 36 h.(e) Schematic illustration for the production of the crystal-like Fe1?xS precursor. (f) Cycle life at 1.0 A·g?1 of the crystal-like Fe1?xS 96.Copyright 2021, American Chemical Society. (g) The entire synthetic mechanism of the few-layered MoS2/SNC. (h–l) HRTEM images of the B-MoS2, 0.3-MoS2/SNC, 0.7-MoS2/SNC, 1.5-MoS2/SNC, and 2.1-MoS2/SNC, respectively. (m) The ultralong cycling properties of 1.5-MoS2/SNC at a high current density of 5.0 A·g?1 97. Copyright 2020, Elsevier.

    A controllable solvothermal strategy including in situ complexation was used to prepare tunable few-layered MoS2chemically bonding (C?S) with nitrogen doped carbon(MoS2/SNC)97. By properly controlling the amount of cetyltrimethylammonium bromide (CTAB), MoS2with the different layer numbers could be obtained. As shown in HRTEM images in Fig. 4h–l, the number of the stacking of MoS2(002)planes layers was reduced from more than 20 layers (B-MoS2)to 2 to 4 layers (1.5-MoS2/SNC and 2.1-MoS2/SNC), with the interplanar distance (d002) gradually expanding from 0.62 nm (BMoS2) to 0.65 nm (0.3-MoS2/SNC). The detailed synthetic mechanism analysis was also carried out to explain the reaction mechanism. Firstly, MoO42?anions coordinated with the ammonium head group CTA+cation to form complex ((CTA)2-MoO4). After that, H2S released from thiourea reduced (CTA)2-MoO4to (CTA)2-MoS2. Finally, the CTA group between MoS2interlayers in situ converted to nitrogen-doped carbon. In the fabrication process, the CTAB worked as the surfactant, inhibitor and the source of carbon at the same time. As the weight ratio of CTAB toincreased, more and more CTA groups bound on the surface of MoS2(002) planes, gradually enlarging the interlayer space of MoS2until it reached 0.7 nm (Fig. 4g).Moreover, a certain amount of CTAB could inhibit the continuous growth of MoS2along the direction of c-axis, thus obtaining MoS2of different layers. As a result, the 1.5-MoS2/SNC anode achieved a long cycle life, which delivers a reversible capacity of 106 mAh·g?1after 1200 cycles at 0.5 A·g?1(Fig. 4m). Furthermore, Ma and his coworkers98synthesized carbon-coated mesoporous Co9S8nanoparticles anchored onto reduced graphene oxide (mp-Co9S8@C/rGO) by the solvothermal reaction method. The low temperature in the solvothermal reaction made the obtained particles amorphous and the introduction of GO suppressed the particle aggregation.The last annealing treatment removed the excess sulfur and facilitated the particle crystallization. The final product presented good electrochemical property toward K+, due to the fine size and mesoporous structure of Co9S8, the protection of amorphous carbon coating and the 3D network structure of rGO.The SnS2nanocrystals, which were loaded onto nitrogen-doped graphene nanosheets and whose interlayers were expanded(SnS2@NC), were prepared via a one-step hydrothermal strategy, where tin chloride and thiourea served as the sources of tin and sulfur, respectively99. The enlarged interlayer spacing,highly conductive nitrogen-doped graphene matrix and the synergistic effect between them enabled the abundant active sites, the superior reaction kinetics and the strong mechanical robustness of the hybrid. Hence, the as-obtained SnS2@NC hybrid manifested an impressive electrochemical capability.

    The solubility of the by-product KxSyin the liquid electrolyte causes irreversible loss of active materials and fluctuated coulombic efficiency, which is a main problem of the MS anodes for PIBs. However, the weak van der Waals interaction between polar KxSy(K2S, K2S5) particles and nonpolar carbon-based hybrids is not the only factor that restrains the dissolution of intermediate KxSy, although it may result in poor electrochemical reaction reversibility101–103. Cao et al.100reported a hydrothermal synthesis for the preparation of the hierarchical 2D layered VS4/SnS@C heterostructure as the anode for PIBs (Fig.5a–d). It was noted that the polar VS4in heterostructure could provide numerous unsaturatedand efficiently trap KxSywith well-constructed Sn0/KxSyinterfaces, largely avoiding the loss of active materials and ensuring the superior reaction dynamics.Additionally, the designed VS4/SnS heterojunction could hinder the coarsening and agglomeration of intermediates Sn, which significantly shortened the K+transport pathways (Fig. 5e). As a result, the VS4/SnS@C anode exhibited a high cycle stability of 168.4 mAh·g?1at 1 A·g?1after 6000 cycles with ultrasmall capacity loss, and a prominent rate capability of 122.7 mAh·g?1at 10 A·g?1. Furthermore, Cao’s research group104investigated the electrochemical performance of a novel class of composite materials of SnS2nanosheets loaded on nitrogen and sulfur codoped MXene (SnS2NSs/MXene). The new composite delivered superior cycle performance and high rate capability on account of the high specific capacity of SnS2, and the robust structure and super conductivity of MXene.

    Fig. 5 (a) The systematic synthesis illustration of VS4/SnS@C hybrid. (b, c) TEM images and (d) SAED pattern of the VS4/SnS@C hybrid.(e) The schematic graph of SnS@C and VS4/SnS@C heterostructure upon K+ insertion 100. Copyright 2021, Wiley-VCH.

    4.3 Solid phase chemical synthesis

    Solid-phase reaction refers to the process of chemical reaction between solids to generate new solid products. It has the advantages of high selectivity, high yield, simple synthesis technology, and easy scale. This type of reaction mainly includes four steps: diffusion, reaction, nucleation and growth39. The diffusion of atoms or ions of solid raw materials begins at the contact surface between the reaction components, and then it is gradually expanded into the interior of the material phase.Therefore, during the reaction process, the reactants need to be fully contacted with each other at high temperature for a long time to increase the reaction rate. Because the lattice structure and atomic arrangement of the raw materials need to be adjusted or evenly rearranged in the process of nucleation, the nucleation will be difficult if the structure of the product and the starting material are very different. However, the nucleation is more likely to happen if the product and the starting material are very close in both atomic arrangement and bond length. In general,the activation energy of the nucleation process is larger than that of the growth process. Hence, once the product is nucleated, it grows larger rapidly. Nanomaterials synthesized via solid-phase reaction have small particles, which helps shorten the transmission path of ions and electrons.

    Traditionally, solid-phase reaction methods can be divided into two categories according to their different operation techniques: mechanical ball-milling and calcination method. The mechanical ball-milling method is to directly grind the raw materials into ultrafine powder with a crusher. According to Gao et al.105, the commercial red phosphorus (RP) and bulk MoS2powders were vigorously ball-milled in an inert atmosphere in the stainless steel jar, and through the mechanical milling process the large-sized raw materials were effectively ground into microscale RP/MoS2particles. At the same time, the hard particles were inlaid in soft substrate to form a mosaic structure (Fig. 6a). Through the modification of the ratio of RP to MoS2, an optimal RP/MoS2proportion of 2 : 1 was attained,which manifested high reversible capacity and good cycle performance (Fig. 6c). The low-cost raw material and the simple fabrication strategy demonstrate the promising prospect of PIB anodes for large-scale industrial application.

    The calcination method is to calcine metal salts or metal oxides after thorough mixing. For example, by simply loading Ph4Sn (the source of Sn and C) and thiourea (the source of S and N) on two porcelain boats in a sealed tube furnace filled with Ar at 500 °C for 4 h, Cao et al.61fabricated SnS2nanosheets with N, S-doped carbon (N, S-C/SnS2nanosheets), which served as the matrix to alleviate volume swelling and the reservoir to hold polysulfides. When evaluated as PIB anode material, the obtained N, S-C/SnS2nanosheet anode exhibited impressive electrochemical performance. Moreover, Sadan et al.106synthesized NiS nanoparticles via a facile and scalable calcination strategy, in which nickel nanopowder and sulfur were mixed by ball milling and then annealed under Ar atmosphere.When heated above its boiling point (444.6 °C), sulfur sublimed and reacted with Ni to produce NiS (Fig. 6b). The potassium-ion storage performance of the prepared NiS anode was studied in ether electrolytes. The result revealed the superior long-term cycling stability in the 1,2-dimethoxyethane (DME)-based electrolyte of NiS, probably due to the thinner SEI layer and lower resistance generated in the ether electrolyte (Fig. 6d).

    Fig. 6 (a) Fabrication process of the RP/MoS2 hybrid. (b) TEM images of NiS nanoparticles. (c) Cycling performance of RP/MoS2 at three different ratios. (d) Long-term cycling property of the NiS anode observed at 10 A·g?1 105. Copyright 2019, Wiley-VCH.

    Fig. 7 (a) Schematic illustration of the synthetic process of SnS2@C through the electrospinning technology. SEM images of (b) SnS2@C-1,(c) SnS2@C-2, (d) SnS2@C-3 and (e) SnS2@C-4. (f) Rate property of SnS2@C-x anodes. (g) Long-term cycling comparison at 2.0 A·g?1 63. Copyright 2021, The Royal Society of Chemistry.

    4.4 Electrospinning method

    Electrospinning is a process in which a polymer solution or melt is jet-stretched under high-voltage electrostatics to obtain nano-scale fibers. This is an important method to prepare ultrafine fibers, with the diameter of tens to hundreds of nanometers. The products feature large specific surface area,high porosity, uniform diameter distribution, easy size control,and easy surface functionalization (such as surface coating,surface modification)107. Therefore, they have high application value in biomedicine, environmental engineering and textile.There are dozens of high molecular polymers that can be used in electrospinning technology, including flexible polymers such as polyester, polyamide, polyvinyl alcohol, polyacrylonitrile, as well as polyurethane elastomers108,109.

    Li et al.63applied the electrospinning process to obtain the first foldable PIBs with flexible and binder-free SnS2@C nanofibers (Fig. 7a), whose electrochemical performance was superior to most of the materials mentioned in the previously reported studies. The size and structure of SnS2@C could be controlled by changing the ratio of SnS2. Fig. 7b–e illustrates the morphological evolution of SnS2@C-x nanofibers tracked by SEM characterization. With an increasing amount of SnCl2·2H2O, the weight ratio of SnS2increased from 21.63% to 78.65%, and the SnS2@C-x nanofibers tended to be thicker and rougher. Meanwhile, the SnS2@C-1 and SnS2@C-2 nanofibers maintained relatively smooth surfaces, whereas the aggregated SnS2particles existed in the SnS2@C-3 and SnS2@C-4 nanofibers. As expected, with appropriate thickness, welldeveloped pore structure and N, S co-doping configurations, the SnS2@C-2 anode manifested extraordinary flexibility and remarkable K+storage capability (Fig. 7f, g). According to Yang et al.58, through a simple electrospinning and the following calcination process, the In2S3/C nanofibers were successfully fabricated. The nanofibers had an average diameter of 400 nm,and were evenly distributed and tightly woven into 3D conductive network. As the anode for PIBs, the electrochemical property of In2S3/C was also investigated for the first time.Compared with commercial In2S3electrodes, In2S3nanofibers anode delivered enhanced sodium-ion storage property because of the in situ formation with nitrogen-doped carbon and the nanoization of In2S3particles. Furthermore, a unique candiedhaws structure containing FeS2@C core–shell units was constructed by our laboratory via an electrospinning method110.The thin amorphous carbon shell and the conductive framework generated by consecutive carbon nanofibers guaranteed the high structural integrity and enhanced the reaction kinetics of the composite. As for its application in PIBs, the FeS2@C anode showed long cyclability and high rate capacity as well.

    Fig. 8 (a) Schematic illustration of the fabrication process of Cu2S@NC. (b) Schematic illustrations of the degradation mechanisms and morphology evolution of the charge/discharge process in bare Cu2S blocks and the Cu2S@NC electrode. TEM images of (c) Cu2O precursors,(d) CuxS and (e) Cu2S@NC. (f) Cycling performance at 0.5 A·g?1 and (g) rate capability of Cu2S@NC and Cu2S in various electrolytes 57.Copyright 2020, American Chemical Society.

    Compared with binary metal sulfides, ternary metal sulfides exhibit better electrochemical property. Polar sulfurized polyacrylonitrile (SPAN), a highly electrochemically active material for lithium and sodium batteries, has stronger ability to trap the discharge products (KxSy) than nonpolar carbon materials, owing to its abundant binding area for polar polysulfides. Inspired by the foresaid merits of SPAN, Qian’s research group111prepared structures with the dual-model confinement of physical barriers and the chemical bounding for excellent reversibility for PIBs. Specifically, BiSbSxnanocrystals were carefully embedded into SPAN fibres(BiSbSx@SPAN) using electrospinning technology. As an anode material for PIBs, it had an excellent ultralong cycle life of 472 mAh·g?1after 2000 cycles under 0.1 A·g?1. The superior K+storage property of BiSbSx@SPAN-450 benefited from the copious sulfur-interacted sites in SPAN to compensate for the loss of active material.

    4.5 Ion-exchange method

    Ion-exchange (IE) technology is a mild approach for the preparation of nanomaterials which has drawn the attention of researchers in recent years. It enables not only the precise morphological engineering of products at the nanoscale, but also the accurate in situ regulation of elemental composition and content. Based on the different solubility product constants (Ksp)of various substances, substances with low solubility products can be converted to the ones with high solubility products in the IE method, thus synthesizing complex materials. This approach can be divided into cation- and anion-exchange processes.During the reaction, the existing lattice is used as a template, and the ions in the lattice are replaced with appropriate ions to change the composition of the material, which greatly improves the possibility of morphogenetic inheritance. Yu’s research group57prepared the nitrogen-doped carbon coated Cu2S hollow nanocubes (Cu2S@NC) as an anode for PIBs via hot-injection,ion-exchange, PDA coating, and high temperature carbonization process (Fig. 8a–e), among which the hollow CuxS nanocubes were obtained through an anion-exchange between Cu2O nanocubes and thiourea (CH4N2S). The carbon coating alleviated the aggregation of the nanosized Cu2S, while the internal cavity of the composite accommodated the volumetric changes, enhancing the structure stability during repeated potassiation/depotassiation. It is worth noting that the high concentration ether-based electrolyte used in this work was conductive to the formation of stable and uniform solid electrolyte interphase (SEI), reducing the interface impedance and improving the cyclability of the composite (Fig. 8f, g). A combined strategy of MOF-derivatization and the subsequent ion-exchange was also used to synthesize copper sulfide embedded in three-dimensional ordered macroporous carbon framework (3DOM Cu9S5@C)56. In the preparation process, the obtained ZIF-8@PS precursor was calcined to remove the PS template and 2-methylimidazole was carbonized to obtain 3D ordered macroporous Zn@C (3DOM Zn@C). After vulcanization, Cu2+which was in copper nitrate aqueous solution replaced Zn2+of 3DOM ZnS@C to form copper sulfide, as a result of the smaller solubility product constant (Ksp) of CuS than ZnS. In particular, the interconnected 3D ordered macroporous structure enhanced the transport kinetics of K+and created large contact area between the liquid electrolyte and active materials,eventually improving the rate performance of the batteries.When employed as the anode for PIBs, the composite showed an excellent potassium storage rate capacity (170 mAh·g?1at 2.0 A·g?1) and satisfactory cycling stability (316 mAh·g?1at 100 mA·g?1after 200 cycles).

    5 Summary and outlook

    The research of the application of MSs as PIB anode materials has made significant progress in recent years. In this review, the potassium ion storage mechanisms, challenges and common synthetic methods of MSs have been summarized and discussed.The three potassium ion storage mechanisms include intercalation/deintercalation reactions, conversion reactions and alloy/dealloying reactions. The existing challenges covered in this review are the dissolution of by-product polysulfides and the shuttle effects, poor conductivity and ion transport kinetics, large volume changes during cycling, side reactions as well as the unstable SEI film. The common synthetic methods include template method, hydro/solvothermal method, solid-phase reaction method, electrospinning method, and ion-exchange method. Through the study of the reaction mechanisms during discharge/charge cycles, the generated side products and their performance, one or more appropriate synthesis methods are selected and the deal structure and composition of MSs are designed to solve the current problems. Single materials and composite materials with porous, hollow, core-shell structures of different dimensions are obtained for the production of highperformance PIBs.

    Based on the review and experiments mentioned above, the following points are suggested as the possible focus of future research. Firstly, the reactions and transport pathways of potassium ions during the storage process should be further explored. Secondly, the reaction process of different synthesis methods should be clarified, so that the composition and structure of the product can be precisely controlled by adjusting the relevant parameters. Thirdly, further studies are needed to optimize electrolytes to reduce side reactions in PIB anodes and form stable and highly conductive SEI films. If these suggestions can be taken, the low-cost and large-scale production of the metal sulfide-based PIB anodes can hopefully be realized in the near future.

    猜你喜歡
    建春南京師范大學材料科學
    中海油化工與新材料科學研究院
    陸建春油畫作品欣賞
    祖父瓷
    意林彩版(2022年1期)2022-05-03 10:25:07
    High-efficiency unidirectional wavefront manipulation for broadband airborne sound with a planar device
    材料科學與工程學科
    南京師范大學附屬中學
    江蘇教育(2021年54期)2021-08-31 10:12:32
    過建春:慢加急性肝衰竭的中西醫結合診治
    肝博士(2020年4期)2020-09-24 09:21:12
    福建工程學院材料科學與工程學科
    《材料科學與工藝》2017年優秀審稿專家
    Faceàma propre culture
    亚洲自拍偷在线| 乱人视频在线观看| 午夜精品在线福利| 久久人妻av系列| 99久久九九国产精品国产免费| 久久精品人妻少妇| 精品久久久久久久久av| 精品欧美国产一区二区三| 欧美另类亚洲清纯唯美| 99久久九九国产精品国产免费| 亚洲国产精品sss在线观看| 亚洲性夜色夜夜综合| 成人av在线播放网站| 亚洲国产精品久久男人天堂| 一级黄色大片毛片| 欧美午夜高清在线| 午夜免费激情av| 午夜福利成人在线免费观看| 国产精品一区二区三区四区免费观看 | 夜夜爽天天搞| 别揉我奶头 嗯啊视频| 亚洲国产日韩欧美精品在线观看| 亚洲精品一区av在线观看| 天堂动漫精品| 亚洲成av人片免费观看| 高潮久久久久久久久久久不卡| 女同久久另类99精品国产91| 国产精品av视频在线免费观看| 深爱激情五月婷婷| 最后的刺客免费高清国语| 亚洲欧美日韩东京热| 国产精品av视频在线免费观看| 亚洲成人免费电影在线观看| 国产精品乱码一区二三区的特点| 亚洲欧美日韩高清在线视频| 蜜桃久久精品国产亚洲av| 亚洲av不卡在线观看| 99久久无色码亚洲精品果冻| 99热只有精品国产| 日韩欧美免费精品| 欧美乱妇无乱码| 国产又黄又爽又无遮挡在线| 麻豆成人av在线观看| 99久久精品热视频| 一本久久中文字幕| 国产高清三级在线| 精品国产亚洲在线| 亚州av有码| 久久久久国内视频| 国产精品一区二区免费欧美| 99久久久亚洲精品蜜臀av| 九九久久精品国产亚洲av麻豆| 99久久精品热视频| 在线观看午夜福利视频| 精品无人区乱码1区二区| 午夜精品一区二区三区免费看| 午夜两性在线视频| 国产av不卡久久| 欧美日韩福利视频一区二区| netflix在线观看网站| 欧美+亚洲+日韩+国产| 精品久久久久久久久av| 成年免费大片在线观看| 成人国产综合亚洲| 免费av毛片视频| 色精品久久人妻99蜜桃| 精品一区二区三区av网在线观看| 久久热精品热| 嫩草影院新地址| 欧美中文日本在线观看视频| 网址你懂的国产日韩在线| 男女下面进入的视频免费午夜| 成人午夜高清在线视频| 又爽又黄a免费视频| 变态另类成人亚洲欧美熟女| 国产精品一区二区三区四区久久| 51国产日韩欧美| 精品久久久久久久人妻蜜臀av| 91字幕亚洲| 最近视频中文字幕2019在线8| 亚洲欧美激情综合另类| 中文资源天堂在线| 国产一级毛片七仙女欲春2| 午夜激情欧美在线| 亚洲人成电影免费在线| 久久草成人影院| 中文字幕久久专区| 成年版毛片免费区| 两性午夜刺激爽爽歪歪视频在线观看| 怎么达到女性高潮| 18+在线观看网站| 国产精品99久久久久久久久| 脱女人内裤的视频| 国产又黄又爽又无遮挡在线| www.熟女人妻精品国产| 午夜久久久久精精品| 日韩欧美在线二视频| 精品人妻一区二区三区麻豆 | 中文亚洲av片在线观看爽| 国产免费一级a男人的天堂| 悠悠久久av| 国产午夜精品久久久久久一区二区三区 | 欧美日韩福利视频一区二区| 国产欧美日韩精品一区二区| 午夜免费成人在线视频| 久久亚洲真实| 国产精品野战在线观看| 91av网一区二区| 毛片一级片免费看久久久久 | 天堂av国产一区二区熟女人妻| 此物有八面人人有两片| 久久久久久久精品吃奶| 淫妇啪啪啪对白视频| 成人av一区二区三区在线看| 久久久久久久午夜电影| 欧洲精品卡2卡3卡4卡5卡区| 国产精品久久久久久久电影| 亚洲av电影在线进入| 最新在线观看一区二区三区| .国产精品久久| 亚洲精品色激情综合| 日韩有码中文字幕| 成人国产综合亚洲| 精品久久久久久久久av| 欧美另类亚洲清纯唯美| ponron亚洲| 亚洲最大成人av| 欧美3d第一页| 亚洲中文字幕日韩| 国产亚洲欧美在线一区二区| 欧美日韩亚洲国产一区二区在线观看| 日本黄大片高清| 久久精品影院6| 欧美色欧美亚洲另类二区| 欧美乱色亚洲激情| 一级a爱片免费观看的视频| 亚洲黑人精品在线| 美女被艹到高潮喷水动态| 国产精品久久久久久亚洲av鲁大| 色精品久久人妻99蜜桃| 天堂av国产一区二区熟女人妻| 色在线成人网| 免费观看的影片在线观看| 精品国内亚洲2022精品成人| 欧美在线黄色| 1024手机看黄色片| 两性午夜刺激爽爽歪歪视频在线观看| 久久亚洲精品不卡| 嫩草影院新地址| 亚洲欧美清纯卡通| 成人午夜高清在线视频| 在现免费观看毛片| 国产真实乱freesex| 狂野欧美白嫩少妇大欣赏| 麻豆av噜噜一区二区三区| 午夜视频国产福利| 两性午夜刺激爽爽歪歪视频在线观看| 欧美日韩福利视频一区二区| 狂野欧美白嫩少妇大欣赏| www.熟女人妻精品国产| 国产亚洲精品av在线| 国产免费男女视频| 91午夜精品亚洲一区二区三区 | 999久久久精品免费观看国产| 身体一侧抽搐| 少妇人妻一区二区三区视频| av欧美777| 变态另类丝袜制服| 久久6这里有精品| 国产精品久久视频播放| 色播亚洲综合网| 国产伦人伦偷精品视频| 中亚洲国语对白在线视频| 久久久色成人| 日韩精品中文字幕看吧| 女生性感内裤真人,穿戴方法视频| 一级av片app| 亚洲av二区三区四区| 亚洲熟妇中文字幕五十中出| 午夜福利成人在线免费观看| 波多野结衣高清无吗| 久久亚洲真实| 亚洲午夜理论影院| 久久久久久久久大av| 国产精品美女特级片免费视频播放器| 一个人看的www免费观看视频| 亚洲18禁久久av| 亚洲一区高清亚洲精品| 麻豆成人av在线观看| 亚洲无线在线观看| 国产大屁股一区二区在线视频| 国产乱人视频| 亚洲五月婷婷丁香| 欧美不卡视频在线免费观看| 免费高清视频大片| 亚洲精品乱码久久久v下载方式| 成人毛片a级毛片在线播放| 91在线精品国自产拍蜜月| 十八禁国产超污无遮挡网站| 国产男靠女视频免费网站| 性插视频无遮挡在线免费观看| 看免费av毛片| 男女做爰动态图高潮gif福利片| 欧美日韩福利视频一区二区| 中文亚洲av片在线观看爽| 18禁在线播放成人免费| 日韩大尺度精品在线看网址| 国产主播在线观看一区二区| 国产日本99.免费观看| 九九在线视频观看精品| 日本免费a在线| 国产 一区 欧美 日韩| 欧美又色又爽又黄视频| 久久午夜亚洲精品久久| 久久国产精品影院| 欧美日韩乱码在线| 久久久精品大字幕| 亚洲综合色惰| 欧美另类亚洲清纯唯美| 日本五十路高清| 精品久久久久久久末码| 日日摸夜夜添夜夜添av毛片 | 男人和女人高潮做爰伦理| 国产午夜精品论理片| 国产精品一及| 欧洲精品卡2卡3卡4卡5卡区| 美女大奶头视频| 亚洲av免费高清在线观看| 国产伦在线观看视频一区| 久久中文看片网| 欧美中文日本在线观看视频| 波多野结衣高清无吗| 日韩欧美精品免费久久 | 最近最新免费中文字幕在线| 国产精品人妻久久久久久| 九九久久精品国产亚洲av麻豆| 精品无人区乱码1区二区| 久久香蕉精品热| 黄色视频,在线免费观看| 亚洲在线自拍视频| 久久国产乱子免费精品| 在线看三级毛片| 黄色一级大片看看| 久久亚洲精品不卡| 国产精品99久久久久久久久| 精品国产亚洲在线| 久久久久久国产a免费观看| 性欧美人与动物交配| 人妻制服诱惑在线中文字幕| 久久精品人妻少妇| АⅤ资源中文在线天堂| 久久午夜福利片| 91麻豆av在线| 91在线观看av| 大型黄色视频在线免费观看| 97超视频在线观看视频| 夜夜爽天天搞| 亚洲欧美精品综合久久99| 国产亚洲精品综合一区在线观看| 一级a爱片免费观看的视频| 亚洲av电影在线进入| 亚洲成a人片在线一区二区| 免费观看精品视频网站| 亚洲 欧美 日韩 在线 免费| 久久精品国产亚洲av香蕉五月| 少妇裸体淫交视频免费看高清| bbb黄色大片| 国产又黄又爽又无遮挡在线| .国产精品久久| 男女做爰动态图高潮gif福利片| 日本a在线网址| 亚洲欧美激情综合另类| 亚洲三级黄色毛片| 亚洲精品在线美女| 草草在线视频免费看| 中亚洲国语对白在线视频| 国产成人a区在线观看| 999久久久精品免费观看国产| 国产一区二区三区在线臀色熟女| 国产v大片淫在线免费观看| 亚洲专区中文字幕在线| 精品熟女少妇八av免费久了| 欧美精品啪啪一区二区三区| 日韩欧美一区二区三区在线观看| 69av精品久久久久久| 国产高清视频在线播放一区| 1000部很黄的大片| 日韩欧美一区二区三区在线观看| 一边摸一边抽搐一进一小说| 中文字幕人妻熟人妻熟丝袜美| 久久热精品热| 精品免费久久久久久久清纯| 国产精品不卡视频一区二区 | 99久国产av精品| 波多野结衣高清无吗| 真人一进一出gif抽搐免费| 亚洲色图av天堂| 18禁在线播放成人免费| 真人做人爱边吃奶动态| 长腿黑丝高跟| 免费在线观看日本一区| 亚洲,欧美精品.| 色尼玛亚洲综合影院| 精品人妻视频免费看| 精品无人区乱码1区二区| 每晚都被弄得嗷嗷叫到高潮| 久9热在线精品视频| 熟女电影av网| 桃红色精品国产亚洲av| 国产精品久久久久久久电影| 男人的好看免费观看在线视频| h日本视频在线播放| 日日干狠狠操夜夜爽| 免费av观看视频| 国产欧美日韩精品亚洲av| 高清在线国产一区| 男女做爰动态图高潮gif福利片| 如何舔出高潮| 久久精品国产自在天天线| 日本黄色片子视频| 国产精品综合久久久久久久免费| 男人的好看免费观看在线视频| 黄色日韩在线| 性插视频无遮挡在线免费观看| 国产精品乱码一区二三区的特点| 欧美成人性av电影在线观看| 国产毛片a区久久久久| 乱人视频在线观看| 91狼人影院| 一个人免费在线观看的高清视频| 亚洲中文日韩欧美视频| 亚洲av日韩精品久久久久久密| 久久久精品大字幕| 天堂√8在线中文| 亚洲av成人精品一区久久| 国产蜜桃级精品一区二区三区| 亚洲人成网站在线播| 久久国产乱子伦精品免费另类| 18禁黄网站禁片午夜丰满| 91久久精品电影网| 成人性生交大片免费视频hd| 大型黄色视频在线免费观看| 国内精品久久久久久久电影| 国内少妇人妻偷人精品xxx网站| 精品一区二区三区视频在线| 12—13女人毛片做爰片一| 精品欧美国产一区二区三| 欧美三级亚洲精品| 精品一区二区三区视频在线| 精品人妻偷拍中文字幕| 亚洲人与动物交配视频| 亚洲精品亚洲一区二区| 精品无人区乱码1区二区| 成人国产一区最新在线观看| 99热6这里只有精品| 97碰自拍视频| 亚洲欧美激情综合另类| 精品人妻视频免费看| 女人被狂操c到高潮| 亚洲精品一区av在线观看| 亚洲成a人片在线一区二区| av天堂在线播放| 99热6这里只有精品| 神马国产精品三级电影在线观看| 美女高潮的动态| 国产男靠女视频免费网站| 99久久精品国产亚洲精品| av在线观看视频网站免费| 在线看三级毛片| 亚洲精品一区av在线观看| 两人在一起打扑克的视频| 亚洲乱码一区二区免费版| 欧美丝袜亚洲另类 | or卡值多少钱| 国产免费男女视频| 色播亚洲综合网| 国产黄片美女视频| 欧美xxxx黑人xx丫x性爽| 精品福利观看| 成人无遮挡网站| 变态另类成人亚洲欧美熟女| 毛片女人毛片| 悠悠久久av| 熟女人妻精品中文字幕| av在线观看视频网站免费| 桃色一区二区三区在线观看| 人人妻人人澡欧美一区二区| 国产单亲对白刺激| 久久国产乱子免费精品| 亚洲国产精品久久男人天堂| 欧美黄色片欧美黄色片| 国产伦精品一区二区三区四那| 精品久久久久久久久av| 欧美日本视频| 少妇裸体淫交视频免费看高清| 伊人久久精品亚洲午夜| 亚洲精华国产精华精| 麻豆成人av在线观看| 一本久久中文字幕| 久久久久久九九精品二区国产| 国产成人av教育| 人人妻人人澡欧美一区二区| 亚洲avbb在线观看| 亚洲,欧美精品.| 怎么达到女性高潮| 久久久精品欧美日韩精品| 亚洲,欧美,日韩| 欧美成人性av电影在线观看| 在线a可以看的网站| 男人的好看免费观看在线视频| 国产午夜福利久久久久久| 午夜精品久久久久久毛片777| 一进一出抽搐gif免费好疼| 午夜激情福利司机影院| 一级a爱片免费观看的视频| 国产精品久久电影中文字幕| 99热只有精品国产| 国产在线男女| 我要搜黄色片| 波野结衣二区三区在线| 真人一进一出gif抽搐免费| 大型黄色视频在线免费观看| 国产成人欧美在线观看| 久久婷婷人人爽人人干人人爱| 国产又黄又爽又无遮挡在线| 女生性感内裤真人,穿戴方法视频| 亚洲午夜理论影院| 69av精品久久久久久| 欧美日韩综合久久久久久 | 国产单亲对白刺激| 婷婷色综合大香蕉| 国产视频内射| 一个人看的www免费观看视频| 三级国产精品欧美在线观看| 免费看美女性在线毛片视频| 免费人成在线观看视频色| 国产精品98久久久久久宅男小说| 午夜a级毛片| 蜜桃久久精品国产亚洲av| 久久精品夜夜夜夜夜久久蜜豆| 日本黄色片子视频| 久久精品人妻少妇| 欧美xxxx黑人xx丫x性爽| 特级一级黄色大片| www.999成人在线观看| 性欧美人与动物交配| 国内少妇人妻偷人精品xxx网站| 久久久久国内视频| 又黄又爽又免费观看的视频| 亚洲av日韩精品久久久久久密| 国产大屁股一区二区在线视频| 精华霜和精华液先用哪个| 亚洲欧美激情综合另类| 12—13女人毛片做爰片一| 18禁裸乳无遮挡免费网站照片| 欧美不卡视频在线免费观看| 日本成人三级电影网站| 欧美不卡视频在线免费观看| 国模一区二区三区四区视频| 亚洲成人久久性| 桃色一区二区三区在线观看| 久久婷婷人人爽人人干人人爱| 国产大屁股一区二区在线视频| 亚洲精品粉嫩美女一区| 一个人看视频在线观看www免费| 欧美xxxx黑人xx丫x性爽| 麻豆久久精品国产亚洲av| 国产日本99.免费观看| 少妇丰满av| 亚洲av成人精品一区久久| 淫秽高清视频在线观看| 婷婷亚洲欧美| 99在线视频只有这里精品首页| av在线观看视频网站免费| 99热这里只有精品一区| 深夜精品福利| 亚洲午夜理论影院| 最近最新免费中文字幕在线| 老熟妇仑乱视频hdxx| 国产单亲对白刺激| 日韩欧美三级三区| 午夜视频国产福利| 91久久精品国产一区二区成人| 国产午夜福利久久久久久| 久久久久性生活片| 精品一区二区免费观看| 99精品在免费线老司机午夜| 欧美成人性av电影在线观看| 国内精品美女久久久久久| 成年免费大片在线观看| 高清日韩中文字幕在线| 亚洲午夜理论影院| 中国美女看黄片| 91字幕亚洲| 中文字幕免费在线视频6| 欧美黄色片欧美黄色片| 亚洲一区二区三区不卡视频| 精品久久久久久久末码| 成人国产一区最新在线观看| 亚洲不卡免费看| 变态另类丝袜制服| 成人高潮视频无遮挡免费网站| 国产亚洲av嫩草精品影院| 自拍偷自拍亚洲精品老妇| www.熟女人妻精品国产| 午夜福利免费观看在线| 黄色日韩在线| 午夜激情欧美在线| 男女做爰动态图高潮gif福利片| 丁香六月欧美| 亚洲av熟女| 国产极品精品免费视频能看的| 成年免费大片在线观看| 亚洲,欧美精品.| 好看av亚洲va欧美ⅴa在| 亚洲精品久久国产高清桃花| 91字幕亚洲| 蜜桃久久精品国产亚洲av| 国产一区二区在线av高清观看| 黄色配什么色好看| 国产真实乱freesex| 3wmmmm亚洲av在线观看| 99精品在免费线老司机午夜| 亚洲aⅴ乱码一区二区在线播放| 1000部很黄的大片| 午夜福利成人在线免费观看| 有码 亚洲区| 国产精品国产高清国产av| 欧美成狂野欧美在线观看| 日韩欧美精品v在线| 男女那种视频在线观看| 99国产综合亚洲精品| 全区人妻精品视频| 免费在线观看亚洲国产| 91麻豆精品激情在线观看国产| 在线播放无遮挡| 18禁裸乳无遮挡免费网站照片| 国产av在哪里看| 国产综合懂色| 观看美女的网站| 亚洲一区二区三区色噜噜| 欧美3d第一页| 波多野结衣高清作品| 在线十欧美十亚洲十日本专区| 毛片女人毛片| 欧美在线黄色| 国产av麻豆久久久久久久| 老鸭窝网址在线观看| 国产三级中文精品| 日韩欧美国产在线观看| 免费大片18禁| 三级国产精品欧美在线观看| 欧美日韩亚洲国产一区二区在线观看| 国产一区二区亚洲精品在线观看| av福利片在线观看| 两人在一起打扑克的视频| 亚洲av美国av| 欧美日韩瑟瑟在线播放| 日韩 亚洲 欧美在线| 国产伦精品一区二区三区视频9| 18+在线观看网站| 久久久久九九精品影院| 久久国产乱子免费精品| 窝窝影院91人妻| 亚洲精品影视一区二区三区av| 午夜福利在线在线| 中文字幕人妻熟人妻熟丝袜美| 国内毛片毛片毛片毛片毛片| 国内精品美女久久久久久| 欧美另类亚洲清纯唯美| a级毛片a级免费在线| 在线天堂最新版资源| 男人狂女人下面高潮的视频| 床上黄色一级片| 欧美最新免费一区二区三区 | 天天一区二区日本电影三级| 能在线免费观看的黄片| www.色视频.com| 欧美+日韩+精品| 一级作爱视频免费观看| 精品一区二区免费观看| 国产精品99久久久久久久久| 成人av在线播放网站| 黄色女人牲交| 亚洲国产日韩欧美精品在线观看| 久久九九热精品免费| 少妇丰满av| 在线播放无遮挡| 一本一本综合久久| 久久亚洲精品不卡| 久久久久免费精品人妻一区二区| 1024手机看黄色片| 久久99热这里只有精品18| 国产精品亚洲美女久久久| 国产淫片久久久久久久久 | 中出人妻视频一区二区| 国产精品日韩av在线免费观看| av福利片在线观看| 国产精品亚洲av一区麻豆| 有码 亚洲区| 久久久久免费精品人妻一区二区| 一个人观看的视频www高清免费观看| 亚洲精品在线美女| 日韩欧美三级三区| 99久久精品国产亚洲精品| 日韩欧美精品v在线| 久久久久精品国产欧美久久久| 国产精品一区二区三区四区久久| 国产欧美日韩精品一区二区| or卡值多少钱| 国产毛片a区久久久久| 久久久久九九精品影院| 国内少妇人妻偷人精品xxx网站| 女人被狂操c到高潮| 最新中文字幕久久久久|