• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Study on liquid-filled structure target with shaped charge vertical penetration

    2020-01-07 09:10:40MinGuoXudongZuXiojunShenZhengxingHung
    Defence Technology 2019年6期

    Min Guo ,Xu-dong Zu ,Xio-jun Shen ,Zheng-xing Hung

    a School of Mechanical Engineering,Nanjing University of Science and Technology,Xiaolingwei 200,Nanjing 210094,China

    b Unit 63961,Peoples Liberation Army,6th Beiyuan Road,Chaoyang Beijing,100012,China

    ABSTRACT Based on the characteristic expanded hole of a shaped charge jet(SCJ)for target penetration and the reflow characteristics of liquids,the liquid-filled structure of a target disturbs the stability of the SCJ acquired in two independent parts.The interference jet speed interval,the escape jet speed interval,and the surplus depth are calculated on the basis of the virtual origin theory.The experimental results,including the velocity of the escaped jet tip and the surplus depth of penetration,are consistent with the theoretical results.Experiments show that the theory can describe the interaction process of the target with a shaped charge jet.

    Keywords:Shaped charge Liquid-filled structure target Disturbed jet Escape jet

    1. Introduction

    Armour for tanks must improve their protective ability to keep crews and important facilities safe inside them.Increasing the hardness and thickness of steel armour outside tanks is not enough to meet the protection requirement.Therefore,most tank vehicles are fitted with additional armour.The new kind of additional armour is light,and it has high cost-effectiveness and low collateral damage. Explosive reactive armour (ERA), ceramic composite,space,and grating armours are widely used in tanks.ERA and ceramic composite armour can be used as additional main armour.ERA can protect vehicles from damage through its shaped charge and kinetic warheads.However,fly-plates caused by ERA explosive may harm the soldiers or equipment items.The shock wave produced by ERA explosive can injure the crew and the important facilities inside the vehicle.Ceramic composite armour can resist the attraction of a kinetic warhead but cannot effectively resist a shaped charge warhead.

    Liquid-filled structure armour is a new kind of additional armour.It is made of bulk steel with a drilled matrix of blind holes that can be linked by small channels.Liquid(e.g.,water and diesel)can be injected in the holes,and a steel cover plate seals the liquid with seal rings and bolts.Liquid-filled structure armour can effectively resist a shaped charge warhead and can reduce the weight of additional armour.The liquid can be used for another purpose if necessary.Few studies have been conducted on the mechanism of liquid-filled structure armour with a SCJ.J.J.White[1]investigated the penetration of a jet in a liquid-filled hermetic structure and found that liquids can undermine jet stability.E.S.Lee[2]explored the penetration process of jet particles in water through high-speed photography and X-ray experiments.M.Held[3]modified Szendrei equations and obtained the reaming equations of jet penetration in water through high spatial and temporal resolution and profilestreak technology.On the basis of visual origin theory,Z.Y.Gao[4]established a mechanical model of a diesel oil-filled hermetic structure interfering with a jet,obtained the interfered velocity range expressions of the jet,and verified the theoretical model through an X-ray experiment.X.Zhang[5]considered that the spray of the liquid and the radial direct convergence in the diesel oil-filled hermetic structure made an SCJ unstable.The interaction characteristic of an SCJ penetrating such armour is studied in this research.The interaction process is analysed in detail.The liquidfilled structure of the target disturbs the stability of the SCJ acquired in two independent parts.We consider the effect of the reflow liquid reflected by the bottom steel plate,as well as the cylindrical walls of the holes,on the stability of an SCJ.The velocity intervals of the disturbed SCJ and the escaped SCJ are calculated.The depth of penetration of the escaped jet is calculated based on the virtual origin model and is consistent with the experimental results.The theoretical model in this paper is more accurate and appropriate than the model given in Refs.[4,5].

    2. Interaction model of liquid-filled structure target with SCJ

    2.1. Shaped charge

    The φ 56 mm standard shaped charge(Fig.1)is observed in this research.The standard shaped charge weighs 180 g and stands at 93.3 mm.It has a 0.8 mm oxygen-free high-conductivity copper(OFHC)cone liner and JH-2 explosive with a density of 1.72 g/cm3.The standard shaped charge is detonated by a#8 detonator.The penetration of the standard shaped charge is not deep.Its structure is simple,and its depth of penetration(DOP)is stable,with a jerk value of the depth of no more than 3%.

    In the experiment lot,the average DOP in#45 steel of the standard shaped charge under an 80 mm stand-off was 201 mm,i.e.,256 mm under the 254 mm stand-off.Q.Q.Xiao[6]revealed the detailed character of an SCJ from X-ray experiments.

    2.2. Target

    The liquid-filled target consists of the main target body,cover plate,seal ring,and bolts.The left part of Fig.2 shows the main target body,which is made of#45 medium carbon steel.The overall dimensions are 145 mm×145 mm×80 mm.Each of the nine blind holes is 30 mm in diameter and 70 mm in depth.The holes are arranged in a matrix and are processed with milling tools.The distance between two holes is 5 mm.A seal groove,which is 3 mm deep and 3 mm wide,is milled on the surface of the main target body around the holes.Three threaded holes are placed along each side of the seal groove.Water is injected into the holes.The seal ring is fitted in the seal groove,and the cover plate whose material is Q235 steel is screwed to the main target body to seal the target.The cover plate and the blinds holes form compartments.

    Fig.1.φ 56 mm standard shaped charge.

    2.3. Process of SCJ penetration of multi-hole-filled-liquid structure target

    Fig.3 shows the process of SCJ penetration of the filled-liquid structure target.(1)The SCJ penetrates the liquid inside the compartments of the target.The shock wave is formed at the tip of the SCJ.The shock wave translates in the target,and the cavity area is formed due to the effect of the expanding hole of the jet in the liquid,which causes the liquid to compress.(2)The SCJ tip pierces the bottom steel plate of the main target body,and part of the SCJ escapes before it is disturbed by the reflow liquid which impacts the bottom plate under the shock wave then reflects by the reactive force of the bottom plate and reflected shock wave and make it cross the penetration path and disturbs the stability of the SCJ.(3)A part of SCJ's stability is disturbed by the reflow liquid which is reflected by the bottom steel plate and the reflect shock wave.This is the first part of disturbed SCJ.After that is a part of the escapes jet.(4)The tail part of the SCJ is disturbed by the reflow liquid which impacts the cylinder wall under the shock wave then reflects by the reactive force of the cylinder walls of the compartments and reflected shock wave and make it cross the penetration path and disturbs the stability of the SCJ.This is the second part of disturbed SCJ.(5)After the SCJ penetrates the liquid-filled structure target,two part of escaped jet can penetrate the witness target still.

    2.4. Penetration model of SCJ

    The SCJ will penetrate the liquid-filled structure target and the witness target.These two part are not continuous,so the theoretical model of the lateral drift velocity of the jet is suitable here.This theoretical indicates that the depth of penetration of the shaped charge jet changes with the stand-off distance.The drift velocity of the jet is

    where vdis the drift velocity,ξ is a constant related to the material state and processing technology.tbis the break up time of the jet,dbis the diameter of the jet when it break up.

    Assuming that the jet virtual origin coordinates are(,t),the jet is divided into finite segments with number n.Furthermore,the velocity of theithfinite segment is vji,and the stand-off distance isz0(from the virtual origin to the target).Thus,the time for the first jet finite segment reaches the witness target is

    Let velocity gradient of the ith jet from head to tail as Δvji,the length of this jet finite segment at the timet0is

    If the total depth of penetration isPi-1before the ith jet finite segment reaches the target,then the time for the jet finite segment to hit the target is expressed as

    Based on the modified Bernoulli equation,the penetration velocity in the witness target of the ith finite segment can be written as

    Fig.2.Structure of the target.

    Fig.3.Schematic diagram of the penetration process.

    The diameter of the hole created by the jet that penetrates the target[10]is

    The penetration time for the ith jet finite segment is

    The depth of penetration by this jet finite segment is

    After the penetration process by the ith jet finite segment is finished,the total depth of penetration is

    Based on the volume constant,the diameter of the ith jet finite segment can be obtained as

    If the timetiof the ith jet finite segment is greater than the break up timetb,or if this jet finite segment is disturbed when it passes through the liquid-filled structure target,then the ith jet finite segment proceeds off the axis before it reaches the bottom of the penetration hole.There is

    This jet finite segment is unable to reach the bottom of the penetration hole to penetrate the target effectively.Thus,

    ΔPi=0

    if

    The finite segment does not exceed the bottom of the penetration hole.The depth of penetration is calculated using Eq.(9),and the total depth of penetration is calculated using Eq.(10).

    2.5. Theoretical model of SCJ vertical penetration to liquid-filled structure target

    When the SCJ penetrates the cover plate and bottom plate,the penetration process can be seen as steady-state penetration.When the SCJ penetrates the liquid in the structure,the penetration velocity is faster than the sound velocity of the liquid(in this study,we inject water in the holes)in the compartments.Thus a shock wave is formed from the tip of the SCJ and the cavity area is formed between the SCJ and the shock wave front.The pressure of liquid near the shock wave front in the same compartment with the SCJ will increase quickly under with the shock wave front moving,as shown in Fig.4.The interaction time is short.Consequently,we ignore the temperature conductivity in the liquid and its vaporisation.

    When the SCJ penetrates the target,the liquid may be affected several times.Based on the research of Rosenberg and Dekel[9],the interval between two impacts can be obtained as

    whereljtis the length of the SCJ when it penetrates the target,andCjis the sound velocity of the SCJ material.

    Fig.4.Schematic diagram of shaped charge jet penetrating the bulkhead structure of the liquid composite target.

    The density and temperature of the liquid increased after the shock wave front when the SCJ penetrates the liquid.Based on the research of Donson and Higginson[7],the relationship of ρland P can be written as

    where ρlis the density of the liquid under pressureP,and ρl0is the density of the liquid in a conventional environment.

    The liquid pressure during the penetration of the SCJ into the liquid can be calculated as

    When the jet moves in the liquid,the half cone angle θ of the shock wave(Mach wave)can be obtained as

    whereClis the sound velocity of the liquid,and vjis the velocity of the SCJ tip.

    Under the pressure of the shock wave,the liquid moves along the normal direction of the shock wave front,as shown in Fig.5.

    A liquid microelement is reflected when it affects the wall of the compartments.Given the interaction of a nearby material,a liquid microelement nearly moves back along the original direction.The reflectance is

    Fig.5.Schematic diagram of water translating under shock wave.

    where ρtandCtare the density and sound velocity,respectively,of the target body,and ρlandClare the corresponding values of the liquid.

    The movement of the liquid microelement is mainly caused by the shock wave, and such movement is observed during the expansion of the liquid hole.The radius of the penetration hole[8]without restraint can be calculated as

    whereRtis the hydrostatic pressure of the water.

    The liquid is constrained in the compartments and cannot be sprayed outside before the SCJ penetrates the bottom of the main target body.Therefore,the liquid can only be compressed and can raise the density under high pressure.

    After the SCJ penetrates the target,the liquid in the target sprays under high pressure.The liquid beside the penetration hole on the bottom plate can be continuously sprayed according to Bernoulli's equation

    wherep1is the pressure in the penetration hole on the bottom plate,p2is the pressure out of the penetration hole on the bottom plate,v1is the average flow velocity of the liquid in the structure near the penetration hole on the bottom plate,andv2is the average flow velocity of the liquid out of the structure near the penetration hole on the bottom plate.

    For the continuous quality equality of the two sides of the bottom plate,we write

    whereA1andA2are the cross-sectional areas of the hole of the liquid-filled structure target and the penetration hole on the bottom plate,respectively.

    The form of the bottom penetration hole is rounded when the SCJ vertically penetrates the target.Therefore,the area of flow inside and outside is written as

    whereRandrctare the radii of the hole of the main target body and the penetration hole on the bottom steel plate,respectively.

    Combining Eqs.(16)and(19),and(21)-(24),the spray velocity of the liquid can be calculated.

    The volume of the sprayed liquid can be written as

    where Δtis the time from the SCJ's penetration of the bottom plate until the second part reflow liquid starts to disturb the stability of the SCJ.

    Through the whole process,the height of the liquid surface diminishes and can be obtained as

    The SCJ will not be disturbed by the liquid-filled structure target between its piercing of the bottom plate and the start of collision with the SCJ of reflow liquid reflected by the bottom steel plate.

    1)The first part of the liquid disturbs the stability of the SCJ.

    The reflow liquid reflected by the bottom steel plate disturbs the stability of the part of the SCJ that is still inside the target.The disturbed jet is considered no longer has ability to penetrate.

    Between the two part of the disturbed jet,the escaped jet can still penetrate the target as usual.

    2)The second part of the liquid disturbs the stability of the SCJ.

    The remaining SCJ is disturbed by the second part of the reflow liquid reflected by the cylinder walls of the compartments.The disturbed jet is considered no longer has ability to penetrate.

    The escaped jet still has penetration ability.DOP can be calculated based on section 2.4.

    3. Experiments and calculations

    3.1. Experiments on standard shaped charge

    For general research,the φ 56 mm standard shaped charge is adopted.The jet tip velocity is 6453 m/s,and that of the tail is 1179 m/s.The length of jet at 80 mm standoff equals 111.5 mm[6].

    Fig.6 illustrates the DOP experiments of the standard shaped charge used in the study under standoff are measured 80 mm and 254 mm.To obtain the velocity of the SCJ tip,velocity sensors were set on both ends of the standoff cylinder.Table 1 presents the experimental results.

    Fig.6.DOP experimental setup with sensors to measure velocity of the SCJ tip.

    After the experiments, witness target under the 254 mm standoff was cut into two pieces by wire-electrode cutting,as shown in Fig.7.

    Table 1Results of the shaped charge performance experiment.

    Fig.7.Split picture of witness target by linear cutting.

    Table 2Materials parameters of the target.

    3.2. Experiments on SCJ vertical penetration of liquid-filled structure target

    Fig.9.Site layout of residual penetration experiment.

    In the experiments,the liquid of the liquid-filled structure target was water.Water stopped flowing out after the cover plate was fixed.The materials parameters of the target shown in Table 2.Fig.8 shows the relationship among the standard shaped charge,liquidfilled structure target,and witness target.The standard shaped charge connected to the liquid-filled structure target through an 80 mm standoff cylinder,and the witness#45 steel target was connected to a 90 mm interval cylinder.The velocity sensors were fixed on the ends of the stand-off and interval cylinders.Fig.9shows the site layout of the residual penetration experiment.Table 3 shows the experimental results.After the experiments,the two witness targets were cut into two pieces by wire-electrode cutting,as shown in Fig.10.

    Table 3Velocity of SCJ that penetrated the liquid-filled structure target and residual penetration.

    Fig.8.Vertical penetration of shaped charge jet into the liquid-filled structure.

    Fig.10.DOP experiments.

    Table 4Disturbed and undisturbed interval velocity of jet.

    3.3. Comparison of experimental results with theoretical calculations

    Table 4 shows the interval velocity of the disturbed jet with the liquid-filled structure target and that of the escaped jet.

    Based on the theoretical equation,the DOP of the escaped jet is 87 mm.Compared with the experiment results,the error is 8.62%.Results of the theoretical calculation are deeper than those of the experiment,because we ignore the influence of the disturbed jet on the escaped jet.The velocity of the first part of the escaped jet tip is 5291.9 m/s,compared to the experimental result of 5346.5 m/s.The error between the theoretical and experimental results is 1.03%.The experiments can prove the correctness of the theory.

    4. Conclusion

    The mechanism of the liquid-filled structure target disturbs SCJ stability and is thus important to designers of armour and shaped charges.The disturbed and escaped jets can both be divided into two parts.The penetration ability of the two parts of an escaped jet can be calculated based on the standoff crave model.The theory clearly explains the whole process,and the experiments prove the theory.

    Acknowledgments

    This research was supported by the National Natural Science Foundation of China(Grant No.11402122)and the China Scholarship Council(201706845026).

    噜噜噜噜噜久久久久久91| 亚洲精华国产精华液的使用体验| 在线看a的网站| 少妇丰满av| 我要看日韩黄色一级片| 久久久久精品性色| 黄色欧美视频在线观看| av在线蜜桃| 街头女战士在线观看网站| 有码 亚洲区| 毛片女人毛片| 夜夜爽夜夜爽视频| 寂寞人妻少妇视频99o| 亚洲综合色惰| 18禁在线无遮挡免费观看视频| 国产一级毛片在线| www.av在线官网国产| 黄片无遮挡物在线观看| 午夜免费鲁丝| 久久久久久久国产电影| 搞女人的毛片| 又大又黄又爽视频免费| 美女内射精品一级片tv| 亚洲精品乱码久久久v下载方式| 天天一区二区日本电影三级| eeuss影院久久| 丰满乱子伦码专区| 色视频www国产| 18+在线观看网站| 国产高潮美女av| 日韩三级伦理在线观看| 好男人在线观看高清免费视频| 亚洲天堂国产精品一区在线| 免费观看在线日韩| 街头女战士在线观看网站| 中文欧美无线码| 国产 精品1| 免费在线观看成人毛片| 久久人人爽人人片av| 久久人人爽人人片av| 性色av一级| 美女视频免费永久观看网站| 丝瓜视频免费看黄片| 欧美一级a爱片免费观看看| 国产精品.久久久| 亚洲欧美精品自产自拍| 2022亚洲国产成人精品| 免费播放大片免费观看视频在线观看| 国产欧美另类精品又又久久亚洲欧美| 亚洲最大成人av| 少妇猛男粗大的猛烈进出视频 | 久久精品国产a三级三级三级| 国产探花在线观看一区二区| 岛国毛片在线播放| 天堂中文最新版在线下载 | 男女国产视频网站| 国产成人a∨麻豆精品| 国产精品久久久久久久久免| 亚洲欧美日韩东京热| 国产 一区精品| 在线观看美女被高潮喷水网站| 99热这里只有是精品在线观看| 亚洲精品一二三| 亚洲精品久久久久久婷婷小说| 久久久国产一区二区| 毛片一级片免费看久久久久| 一个人观看的视频www高清免费观看| 国产综合精华液| 亚洲色图综合在线观看| 国模一区二区三区四区视频| 下体分泌物呈黄色| 男人狂女人下面高潮的视频| 亚洲精品一区蜜桃| 欧美变态另类bdsm刘玥| 大香蕉久久网| 在线天堂最新版资源| 亚洲av中文av极速乱| 99久久精品热视频| 中国国产av一级| 亚洲va在线va天堂va国产| 香蕉精品网在线| 久久久久久久久久成人| 最近中文字幕2019免费版| 久久久成人免费电影| videossex国产| videos熟女内射| 亚洲电影在线观看av| av又黄又爽大尺度在线免费看| 禁无遮挡网站| 精品视频人人做人人爽| 男的添女的下面高潮视频| 欧美国产精品一级二级三级 | 国产免费一区二区三区四区乱码| 久久精品熟女亚洲av麻豆精品| 日韩欧美 国产精品| 国产黄a三级三级三级人| 最近2019中文字幕mv第一页| 91精品一卡2卡3卡4卡| 国产精品偷伦视频观看了| 黄色怎么调成土黄色| 在线亚洲精品国产二区图片欧美 | 亚洲国产色片| 国产精品99久久久久久久久| 色吧在线观看| 久久久久性生活片| 五月开心婷婷网| 美女国产视频在线观看| 亚洲av免费高清在线观看| 国产淫语在线视频| 亚洲自拍偷在线| 嫩草影院新地址| 亚洲国产成人一精品久久久| 精品熟女少妇av免费看| 成人特级av手机在线观看| 色视频www国产| 岛国毛片在线播放| 免费不卡的大黄色大毛片视频在线观看| 亚洲精品中文字幕在线视频 | 麻豆成人午夜福利视频| 国产成人一区二区在线| 国产精品av视频在线免费观看| 欧美日韩国产mv在线观看视频 | 亚洲av日韩在线播放| 国产黄a三级三级三级人| 一级黄片播放器| 国产又色又爽无遮挡免| 又大又黄又爽视频免费| 下体分泌物呈黄色| 尾随美女入室| 美女国产视频在线观看| 熟女人妻精品中文字幕| 成年版毛片免费区| 啦啦啦在线观看免费高清www| 国产精品熟女久久久久浪| 亚洲av中文字字幕乱码综合| 日韩欧美精品v在线| 一二三四中文在线观看免费高清| 精品视频人人做人人爽| 欧美日韩精品成人综合77777| 成人无遮挡网站| 亚洲三级黄色毛片| 深夜a级毛片| 午夜福利视频精品| 欧美97在线视频| 男人舔奶头视频| 亚洲色图综合在线观看| 青春草视频在线免费观看| 日产精品乱码卡一卡2卡三| 欧美激情在线99| 97在线人人人人妻| 婷婷色麻豆天堂久久| 校园人妻丝袜中文字幕| 夜夜爽夜夜爽视频| 久久久久精品久久久久真实原创| 简卡轻食公司| 一个人看的www免费观看视频| 国产精品国产三级国产av玫瑰| 国产黄色视频一区二区在线观看| 白带黄色成豆腐渣| 中文精品一卡2卡3卡4更新| 最近的中文字幕免费完整| 国产探花极品一区二区| 成人国产av品久久久| 美女脱内裤让男人舔精品视频| 自拍欧美九色日韩亚洲蝌蚪91 | 亚洲国产色片| 久久久久久久久久久免费av| 综合色av麻豆| 极品少妇高潮喷水抽搐| av在线观看视频网站免费| 国精品久久久久久国模美| 直男gayav资源| 麻豆久久精品国产亚洲av| 我要看日韩黄色一级片| 尤物成人国产欧美一区二区三区| 午夜福利在线在线| 亚洲精品国产av成人精品| 亚洲精华国产精华液的使用体验| 18禁裸乳无遮挡动漫免费视频 | 搡女人真爽免费视频火全软件| 日本欧美国产在线视频| 不卡视频在线观看欧美| 精品久久久久久久久av| 97在线人人人人妻| 国产 一区精品| 婷婷色综合www| 人人妻人人看人人澡| 欧美bdsm另类| 麻豆乱淫一区二区| 夜夜看夜夜爽夜夜摸| 嫩草影院精品99| 国产精品蜜桃在线观看| 久久久久久九九精品二区国产| 国产高清有码在线观看视频| 成年女人在线观看亚洲视频 | 一级爰片在线观看| 少妇丰满av| 亚洲精品日本国产第一区| 人妻一区二区av| 最近最新中文字幕免费大全7| 亚洲精品第二区| 亚洲经典国产精华液单| 青春草亚洲视频在线观看| 亚洲不卡免费看| 久久精品人妻少妇| 好男人视频免费观看在线| 欧美潮喷喷水| 国内揄拍国产精品人妻在线| 在线免费观看不下载黄p国产| 亚洲欧美日韩东京热| 国产精品成人在线| 免费av毛片视频| 亚洲av二区三区四区| 欧美日韩视频精品一区| 一边亲一边摸免费视频| 国产在视频线精品| av黄色大香蕉| 欧美区成人在线视频| av免费在线看不卡| 插阴视频在线观看视频| 精品人妻一区二区三区麻豆| 成人亚洲精品一区在线观看 | 日本熟妇午夜| 日本午夜av视频| 一区二区三区四区激情视频| 国产在线一区二区三区精| 在线天堂最新版资源| xxx大片免费视频| 亚洲成人久久爱视频| 久久久精品免费免费高清| 亚洲精品乱码久久久久久按摩| 久久人人爽av亚洲精品天堂 | 国内精品宾馆在线| 亚洲人成网站高清观看| 久久久久久久久久人人人人人人| 国产亚洲午夜精品一区二区久久 | 久久女婷五月综合色啪小说 | 秋霞在线观看毛片| 人妻 亚洲 视频| 日本午夜av视频| 大香蕉97超碰在线| 国产精品99久久久久久久久| 丰满人妻一区二区三区视频av| 网址你懂的国产日韩在线| 日韩中字成人| 国内精品宾馆在线| 国产成人一区二区在线| 亚洲一级一片aⅴ在线观看| 免费黄色在线免费观看| 国产精品一区二区在线观看99| 国产一区亚洲一区在线观看| 亚洲精品国产av成人精品| 丝瓜视频免费看黄片| 一个人看视频在线观看www免费| 男的添女的下面高潮视频| 精品久久久久久久久av| 国产精品99久久99久久久不卡 | 国产成人a区在线观看| 纵有疾风起免费观看全集完整版| 亚洲欧洲日产国产| 天堂俺去俺来也www色官网| 高清视频免费观看一区二区| 久久99热这里只有精品18| 最近手机中文字幕大全| 国产白丝娇喘喷水9色精品| 舔av片在线| 久久久久久久亚洲中文字幕| 亚洲综合色惰| 亚洲美女搞黄在线观看| 哪个播放器可以免费观看大片| 在线免费十八禁| av天堂中文字幕网| 亚洲精品久久午夜乱码| 亚洲人成网站在线观看播放| 久久人人爽人人爽人人片va| 一级爰片在线观看| 少妇人妻 视频| 99热这里只有是精品在线观看| 大话2 男鬼变身卡| 国产亚洲av嫩草精品影院| 国产精品.久久久| 听说在线观看完整版免费高清| 久久久久久久亚洲中文字幕| www.色视频.com| 91精品国产九色| 中文字幕av成人在线电影| 亚洲综合精品二区| 老司机影院毛片| 午夜免费鲁丝| 欧美+日韩+精品| 久久久久久久午夜电影| 久久这里有精品视频免费| 免费电影在线观看免费观看| 国产乱人偷精品视频| 国产 一区精品| 国产中年淑女户外野战色| 免费观看av网站的网址| 春色校园在线视频观看| 夜夜看夜夜爽夜夜摸| 91久久精品国产一区二区成人| 91狼人影院| 久久久久久久午夜电影| 国产伦精品一区二区三区四那| av免费在线看不卡| 中文在线观看免费www的网站| 男女下面进入的视频免费午夜| 美女高潮的动态| 亚洲激情五月婷婷啪啪| 国产成人aa在线观看| 寂寞人妻少妇视频99o| 一区二区三区免费毛片| 久久精品国产亚洲av涩爱| 国产精品一及| 亚洲最大成人手机在线| 各种免费的搞黄视频| 久久99热6这里只有精品| 在线精品无人区一区二区三 | 亚洲精品亚洲一区二区| 国产精品国产三级国产av玫瑰| 99久国产av精品国产电影| 国产探花极品一区二区| 国产成人精品婷婷| 性色av一级| 99视频精品全部免费 在线| 日本猛色少妇xxxxx猛交久久| 国产精品伦人一区二区| 夜夜看夜夜爽夜夜摸| 亚洲精品国产色婷婷电影| 99热这里只有精品一区| 日本黄大片高清| 偷拍熟女少妇极品色| 日日啪夜夜爽| 午夜福利高清视频| 精品少妇久久久久久888优播| 97在线人人人人妻| 成人毛片a级毛片在线播放| 久久人人爽av亚洲精品天堂 | 成年女人在线观看亚洲视频 | 国产一级毛片在线| 熟女电影av网| 狂野欧美激情性xxxx在线观看| 欧美成人精品欧美一级黄| 天堂中文最新版在线下载 | 亚洲国产成人一精品久久久| 亚洲电影在线观看av| 成人漫画全彩无遮挡| av线在线观看网站| 1000部很黄的大片| 久久综合国产亚洲精品| tube8黄色片| 亚洲欧美精品专区久久| 亚洲aⅴ乱码一区二区在线播放| 精品久久久噜噜| av免费观看日本| 国内精品宾馆在线| 高清视频免费观看一区二区| 99久久中文字幕三级久久日本| 狂野欧美激情性bbbbbb| 国产精品一区二区三区四区免费观看| 各种免费的搞黄视频| 成年免费大片在线观看| 插逼视频在线观看| 青青草视频在线视频观看| 亚洲精品国产av蜜桃| 最近中文字幕2019免费版| 搡老乐熟女国产| av在线app专区| 日产精品乱码卡一卡2卡三| 美女内射精品一级片tv| 另类亚洲欧美激情| 男女下面进入的视频免费午夜| 在线 av 中文字幕| 国产毛片在线视频| 日韩大片免费观看网站| 麻豆乱淫一区二区| 国产熟女欧美一区二区| 嫩草影院精品99| 老女人水多毛片| 男女边摸边吃奶| 丝袜美腿在线中文| a级一级毛片免费在线观看| 日韩精品有码人妻一区| 水蜜桃什么品种好| 特级一级黄色大片| 各种免费的搞黄视频| 女人被狂操c到高潮| 亚洲成色77777| 欧美国产精品一级二级三级 | 久久精品久久久久久噜噜老黄| 男人爽女人下面视频在线观看| www.av在线官网国产| 国产成人福利小说| 成年免费大片在线观看| 一级毛片黄色毛片免费观看视频| 中国国产av一级| 久久99热6这里只有精品| 九草在线视频观看| 男女边吃奶边做爰视频| 亚洲图色成人| 日韩av在线免费看完整版不卡| av国产久精品久网站免费入址| 熟女av电影| 日韩三级伦理在线观看| 亚洲成人一二三区av| 午夜福利在线观看免费完整高清在| av在线天堂中文字幕| 真实男女啪啪啪动态图| 国产 一区精品| 亚洲国产精品成人久久小说| 五月开心婷婷网| 亚洲精品国产成人久久av| 国产乱人偷精品视频| 国产精品成人在线| 日本欧美国产在线视频| 岛国毛片在线播放| 夫妻午夜视频| videos熟女内射| 免费高清在线观看视频在线观看| 国产免费一区二区三区四区乱码| 尾随美女入室| 精品午夜福利在线看| 蜜桃久久精品国产亚洲av| 2022亚洲国产成人精品| 久久久久九九精品影院| 91精品一卡2卡3卡4卡| 国产亚洲91精品色在线| 如何舔出高潮| 欧美精品一区二区大全| 一区二区三区免费毛片| 亚洲,欧美,日韩| 国产男女内射视频| 在线亚洲精品国产二区图片欧美 | 精品久久久久久久久亚洲| 国产美女午夜福利| 亚洲成人av在线免费| 偷拍熟女少妇极品色| 一级毛片aaaaaa免费看小| www.色视频.com| 久热久热在线精品观看| 亚洲一区二区三区欧美精品 | 成年女人看的毛片在线观看| 一区二区三区四区激情视频| 免费看不卡的av| 黑人高潮一二区| 香蕉精品网在线| 国产高潮美女av| 国语对白做爰xxxⅹ性视频网站| 看免费成人av毛片| 久久久久久久午夜电影| 亚洲天堂国产精品一区在线| 日本色播在线视频| 99热6这里只有精品| 国产免费福利视频在线观看| 一区二区三区四区激情视频| 日日摸夜夜添夜夜添av毛片| 精品久久久久久久久av| 久久久久久久国产电影| av播播在线观看一区| 国产成人aa在线观看| 成人毛片60女人毛片免费| 大片免费播放器 马上看| 99re6热这里在线精品视频| 一级毛片电影观看| 国产精品国产三级国产专区5o| 在线观看人妻少妇| 深夜a级毛片| 亚洲国产精品成人久久小说| 看十八女毛片水多多多| 在线观看美女被高潮喷水网站| 久久精品熟女亚洲av麻豆精品| 久久久久久伊人网av| 午夜精品国产一区二区电影 | 欧美另类一区| 日本一本二区三区精品| 看非洲黑人一级黄片| 国产乱来视频区| 日韩人妻高清精品专区| 99久久精品国产国产毛片| 免费大片黄手机在线观看| 欧美性猛交╳xxx乱大交人| 99久久精品一区二区三区| 久久人人爽人人爽人人片va| 中文字幕人妻熟人妻熟丝袜美| 日本色播在线视频| a级毛色黄片| 男女啪啪激烈高潮av片| 丝袜脚勾引网站| 国产熟女欧美一区二区| 大片免费播放器 马上看| 国产毛片a区久久久久| 欧美性猛交╳xxx乱大交人| av专区在线播放| 午夜激情久久久久久久| 国产色爽女视频免费观看| 七月丁香在线播放| 日日啪夜夜爽| 搡女人真爽免费视频火全软件| 欧美成人午夜免费资源| 最新中文字幕久久久久| 超碰97精品在线观看| 只有这里有精品99| 少妇熟女欧美另类| 男人舔奶头视频| 乱系列少妇在线播放| 在线看a的网站| 亚洲最大成人手机在线| 高清午夜精品一区二区三区| 性色avwww在线观看| 少妇高潮的动态图| 激情 狠狠 欧美| 极品少妇高潮喷水抽搐| 精华霜和精华液先用哪个| 日韩一区二区三区影片| 三级经典国产精品| 精品一区在线观看国产| 80岁老熟妇乱子伦牲交| 少妇的逼好多水| 欧美97在线视频| xxx大片免费视频| 夜夜爽夜夜爽视频| 欧美精品国产亚洲| 免费少妇av软件| 中文精品一卡2卡3卡4更新| 国产成人精品一,二区| 日韩三级伦理在线观看| 男女那种视频在线观看| 少妇人妻 视频| 新久久久久国产一级毛片| 日本wwww免费看| av黄色大香蕉| 七月丁香在线播放| 极品少妇高潮喷水抽搐| 免费电影在线观看免费观看| 99久久人妻综合| 成人国产麻豆网| 亚洲美女搞黄在线观看| 日韩欧美精品v在线| 男人狂女人下面高潮的视频| freevideosex欧美| 人妻系列 视频| 蜜臀久久99精品久久宅男| 少妇熟女欧美另类| 蜜臀久久99精品久久宅男| 少妇熟女欧美另类| 国产精品成人在线| 蜜桃亚洲精品一区二区三区| 亚洲天堂av无毛| 国产欧美日韩一区二区三区在线 | 少妇人妻 视频| 日韩精品有码人妻一区| 韩国av在线不卡| 国产乱人视频| 国产人妻一区二区三区在| 午夜福利高清视频| 最近的中文字幕免费完整| 日韩一本色道免费dvd| 少妇人妻精品综合一区二区| 久久精品人妻少妇| 国产中年淑女户外野战色| av在线观看视频网站免费| 麻豆乱淫一区二区| 日本与韩国留学比较| 成人鲁丝片一二三区免费| 中文欧美无线码| 青春草国产在线视频| 91aial.com中文字幕在线观看| 一级av片app| 国产一区二区在线观看日韩| 国产在线一区二区三区精| 各种免费的搞黄视频| 成年女人在线观看亚洲视频 | 久久这里有精品视频免费| 亚洲欧洲日产国产| 免费av观看视频| 天美传媒精品一区二区| 黄色一级大片看看| 天天躁日日操中文字幕| 国产av码专区亚洲av| 男人和女人高潮做爰伦理| 久久精品人妻少妇| 国产精品国产三级国产专区5o| 街头女战士在线观看网站| 在线亚洲精品国产二区图片欧美 | 少妇的逼好多水| 欧美变态另类bdsm刘玥| 18禁在线播放成人免费| 大香蕉久久网| 国产在视频线精品| 国产免费一级a男人的天堂| 乱系列少妇在线播放| 日产精品乱码卡一卡2卡三| 免费看日本二区| 在线观看一区二区三区| 新久久久久国产一级毛片| 啦啦啦在线观看免费高清www| 国产又色又爽无遮挡免| 在线观看美女被高潮喷水网站| 国产精品.久久久| 日韩免费高清中文字幕av| 成人毛片a级毛片在线播放| 少妇熟女欧美另类| 日本午夜av视频| 涩涩av久久男人的天堂| 日韩av免费高清视频| 人人妻人人看人人澡| 午夜免费鲁丝| av天堂中文字幕网| 毛片女人毛片| 久久久亚洲精品成人影院| 日本黄色片子视频| 精华霜和精华液先用哪个| 亚洲精品乱码久久久v下载方式| 亚洲av福利一区| 人人妻人人看人人澡| 亚洲aⅴ乱码一区二区在线播放|