• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Implementation of wireless communication and real time control for CNC system of embedded CNC turret punch press*

    2014-06-09 14:44:40WeiweiLINPeisiZHONGXiaodongLYUXuanGE
    機床與液壓 2014年3期
    關鍵詞:嵌入式操作系統轉塔實時控制

    Wei-wei LIN,Pei-si ZHONG,Xiao-dong LYU,Xuan GE

    Advanced Manufacturing Technology Center,Shandong University of Science and Technology,Qingdao 266590,China

    Implementation of wireless communication and real time control for CNC system of embedded CNC turret punch press*

    Wei-wei LIN?,Pei-si ZHONG,Xiao-dong LYU,Xuan GE

    Advanced Manufacturing Technology Center,Shandong University of Science and Technology,Qingdao 266590,China

    In view of the existing problems of CNC system,which is based on PC and widely used in the industry,this paper puts forward a high real time performance and multi task embedded CNC turret punch press system based on embedded technology and a microprocessor.In order to meet the requirements for the real-time control of CNC turret punch press,WinCE7 embedded operation system and the hardware platform based on CORTEXA8 microprocessor and FPGA are selected.The current situation of communication between computer and NC machine tool and its impact for the high efficient processing automation are analyzed,and the wire less communication scheme based on ZigBee of CNC turret punch press is proposed in this paper.The implementation of real-time control of CNC system is introduced and the experimental results show that the ZigBee module could realize normal communication between PC and embedded controller,data interaction and low business costs,and it could im prove production efficiency as well.

    WinCE7,Embedded NC system,ZigBee,Wireless communication,Real-time control

    1.Introduction

    The numerical control technology is the core of advanced manufacturing technology,which is conducive to the development of high-tech industries and emerging cutting-edge industries[1].CNC system,the important equipment in manufacturing system,is the core of numerical control technology.Since the embedded numerical control system based on microprocessor is the perfect combination of embedded technology and numerical control technology,it has the following advantages:it could be customized,small volume,low power consumption,low cost,short development cycle,both hardware and software could be cut,good operation stability,and high reliability.Therefore,the scheme of CNC system embedded of CNC turret punch press,which is based on WinCE7,is proposed.

    Since the open CNC system with high speed,high precision,efficient,intelligent and network has become the main trend for the development of contemporary numerical control system[2],the high real-time processing of the numerical control system for all kinds of parameters and file information are particularly important for the communication efficiency of NC system.The design uses the emerging industrial grade wireless communication scheme.

    2.CNC system of embedded CNC turret punch press

    2.1.CNC system architecture of em bedded CNC turret punch press

    The hardware structure of CNC turret punchpress system is shown in Figure 1.

    Figure 1.Hardware structure of the system

    The whole system has five main components:PC subsystem,ZigBee wireless subsystem,ARM subsystem,D/A subsystem,and FPGA subsystem.PC subsystem is mainly to complete the coarse interpolation calculation.ZigBee wireless subsystem is responsible for the data exchange between the host computer and the machine tool controller.ARM microprocessor is responsible for receiving the PC rough interpolation processing data stream by the ZigBee wireless module and transmit data stream to the FPGA through the SPI bus.The D/A subsystem can meet the switch from digital signal to analog signal.The main function of FPGA is to complete the fine interpolation calculation produce the pulse signal to directly drive the movement of stepper motor[3].Stepper motors and stepper motor drivers constitute a stepper motor drive system.

    2.2.Selection and construction of the system software platform

    Windows Embedded Compact7(WinCE7)not only supports X86 and MIPS,but also supports the new ARMv7 framework and multi-core processors. Platform Builder 2008 seamlessly integrated in Visual Studio 2008,can provide a more efficient and smooth development experience for the developer[4]. Therefore,the new generation of operating system(Windows Embedded Compact 7)is chosed as the development platform of software system.

    Windows Embedded Compact7 development environment sets up through Microsoft official online installation package.The operating system provides a wealth of tools and techniques which could help developers build rich and vivid equipment user interface and improve the application of high efficiency.However,these lead to installation requires a larger disk space.If all the installation components are selected in the process,the size of cache for installation will reach up to nearly 60 GB.Fortunately,a lot of component functions for different development are not needed,In order to save the disk space of PC and ensure the operation rate,it should make a concrete analysis for specific problems and select the useful components for the development.For example,since the development language is the VC++,the VC++ could be only installed when one starts to install VS2008 rather than C#and JAVA.Moreover,the corresponding processor should be selected to set up Platform Builder based on the design of hardware platform,such as the hardware platform for this design is Cortex-A8 microprocessor platform based on ARMv7 architecture specification compliance,and once it is installed,the"ARMv7 Architecture"becomes the only option.Therefore,by doing this,it could save time and avoid the waste of a large amount of disk space during installation.According to the corresponding hardware platform selects and customizes development component.After installation,it takes up about 35G of disk space.The steps for the Windows Embedded Compact7 development environment are as follows:(1)Visual Studio2008(2)MSDN Library for Visual Studio 2008(3)Visual Studio 2008 SP1(4)Microsoft Expression Blend(5)Windows Embedded Compact7(6)Microsoft Virtual PC

    Once the above steps are completed,the embedded NC system development environment has been built.The next step is to transplant the customized operating system to the development board.By using USB line to download mirror finishing transplantation.Transplantation mainly needs three steps:①U-sing the EBOOT of original CE6 to burn the STEPLDR and EBOOT for CE7.②Run CE7 EBOOT and enter the‘F’command.③Using EBOOT of CE7 to download CE7 NK by USB line. After transplantation,the start interface of the development board is shown in Figure 2.

    Figure 2.Development board boot interface

    3.Realization of wireless communication for CNC turret punch press

    ZigBee wireless network technology,low power consumption,easy configuration,get more and more widely used in the industry,is used in this design. In order to realize the wireless communication of NC system,ZigBee driven development becomes particularly important.

    The machine equipment driver of embedded operating system is suitable for equipments integrated into the WinCE platform,such as LED and power supply.WinCE supports native device driver by customizing the interface,developers do not need to write device drivers.Stream interface drivers are the most common type of drivers implemented in Windows Embedded Compact 7[5].Stream interface driver program is designed to connect the WinCE platform’s peripheral equipment[6].Therefore,the ZigBee driver uses the stream interface driver.The main function of the drive is to send and receive data,network construction,adding network,acquiring RSSI and etc.The following will introduce several main stream interface functions for ZigBee driver.

    1)DWORD CC2530_Init(DWORD dWContext)

    RETAILMSG(l,(TEXT(“CC2530_Init---- n”)));

    Serlnit();

    CC2530init();

    The function of this function is to initialize the module,enable the serial register and set the main parameters.Serlnit()function is to complete the physical address’s application,the virtual address to physical address mapping and setting baud rate. CC2530init()is to set the serial baud rate,stop bit and enabling register by calling the system serial transmission function.

    2)BooL CC2530_IOControl(DWORD hopen-Context,DWORD dwCode,PBYTE PBufin,DWORD dwLenln,PBYTE PBufout,DWORD dwLenout,PDWORD PdwActualout)

    {switch(dwCode)

    case IO_CTL_CC2530_GDAIMA:

    SendDate(0x l<<l);

    case IO_CTL_CC2530_XITONGCANSHU:

    SendDate(0x l<<2);

    case IO_CTL_CC2530_DAOBUCANSHU:

    SendDate(0xl<<3);

    case IO_CTL_CC2530_RSSI:

    SendDate(0xl<<4);

    case IO_CTL_CC2530_REFNODE_

    REQUEST_CONFIG:

    SendDate(0xl<<23);

    case IO_CTL_CC2530_REFNODE_

    CONFIG:

    SendDate(0xl<<21);

    case IO_CTL_CC2530_BLINDNODE_

    FIND_RESPONSE:

    SendDate(0xl<<19);

    case IO_CTL_CC2530_BLINDNODE_

    REQUEST_CONFIG:

    SendDate(0xl<<17);

    case IO_CTL_CC2530_BLINDNODE_

    CONFIG:

    SendDate(0xl<<15);

    case IO_CTL_CC2530_RSSI_BLAST:

    SendDate(oxl<<13):

    case IO_CTL_CC2530_RSSI_RESPONSE:

    SendDate(0xl<<11):

    This function is used to send commands to the device.DeviceIO Control()function can realize operating system to call this function.Parameter dw-Code is used to inform the driver to perform an action.In driver design,the definition of several simple commands such as G code,embedded NC system parameters,tool compensation parameters,RSSI value.The values are 1,2,3 and 4.When the CC2530 receives the application related to several orders,wireless modules begin to collect the related data in the network,and then sent them to the wireless module which is connected to the machine.

    The sending and receiving data of wireless module is shown in Figure 3.

    Figure 3.Data sending and receiving process

    4.Implementation of real-time control of embedded CNC turret punch press

    Although windows CE is a real-time operation system,it has the characteristics of multi task operation system.According to the characteristics of the operation system,the CNC system such as interpolation,position control and fault diagnosis by triggering interrupt are the real-time tasks.The graphic display,edit and management of machining program,PLC scanning,the system input/output,interpolation preprocessing(decoding,processing speed pretreatment,cutter compensation)and other weak real-time tasks are arranged running on the common thread of the operation system.Hard real-time tasks use priority preemptive scheduling.

    The priority setting of main task of NC system is shown in the Table 1.

    The main control thread continues to run until the CNC system software is exited and the priority should be the minimum.Edit thread can compile machining program on-line,its priority is higher than the main control thread setting to level 230.Time slice of thread is 5 ms.The thread of parameter setting can set and modify the parameters of the system. Its priority is at the same level with edit thread.Communication and networking thread also must run at the same time.It keeps the CNC system connecting with the industrial control network,the priority should be higher than the main control thread setting to 220.Time slice of thread is 3 ms.Scanning panel thread completes scan of some switch signal on panel.The priority of the thread is at the same level with communication and networking thread.Interpretation instruction and the thread of execution will be responsible for the interpretation and implementation of the NC code and start the interpolation control.Its priority is set to level 170.Time slice thread is 1ms.Online monitoring and diagnosis thread take responsibility for security in CNC machining,a higher priority than the other thread priority,which can be set to 160.Time slice is 1ms.The thread must have been running.This thread can realize real-time automatic diagnosis for servo drive control unit,external device and system device.High priority tasks will be priority scheduling,the same priority thread will be run according to the time slice rotation schedule.

    Table 1.Priority setting of main task of NC system

    5.Test and experiment of system

    The experimental machine is Nanjing Huaxun Machinery Manufacturing Co.,Ltd.HPI-3047 CNC turret punch with production workshop environment. Packet Sniffer protocol analysis software,can analysis and decode information packets of each layer protocols such as PHY and MAC,display the error packet and access error.As shown in Figure 4,the Packet Sniffer software capture wireless communication data packets is adopted in this NC system.Figure 5 shows the ACK frame after received data.

    Figure 4.Send packets

    Figure 5.Accept the data ACK frame

    The experimental results show that the design of ZigBee wireless communication module of Embedded CNC turret punch press could achieve data interaction between the host computer and the machine tool embedded controller.It could completely replace the traditional cable communication to reduce the cost and improve the efficiency of machine tool.

    6.Conclusion

    In this paper,the WinCE7 real-time operating system and high performance microprocessor(CORTEXA8)are adopted to build the platform of NC system with high real-time and the implementation of real-time control systems is analyzed.The ZigBee wireless communication technology could be applied to the communication system of CNC machine tools to replace the traditional cable communication,save working space and the communication system maintenance and repair costs.With the development of internet and wireless communication technology,the requirements of high performance CNC system in CNC machining and the embedded NC system will get better application and development.The wireless communication machine,efficient manufacturing and Networked manufacturing will also get faster development.This trend of development will reduce the cost of enterprises and improve the economic efficiency of enterprises.

    [1] Zou Yu-xie.Research on the key technology of Embedded CNC system based on ARM processor[D].Shanghai:Shanghai Jiao Tong University,2007.

    [2] Ji Guang-ming.Design and research of high performance CNC system based on OMAP3530[D].Nanjing:Nanjing University of Aeronautics&amp,2012.

    [3] Lai Xiao-feng,Liu Jing-meng,Gu Tian-yu,et al.The motion control system based on PC and FPGA[J].The application of electronic technology,2011(4):130-132,141.

    [4] Shao Ming,Li Guang-yang,Yang Hui-ling.Design of Embedded CNC system function module based on FPGA[J].Machine tool&amp;hydraulics,2010,16:68 -71.

    [5] Samuel Phung,David Jones.Professional Windows?Embedded Compact7[M].John Wiley&Sons,Inc,2011.

    [6] Wilson Y J.Windows CE Device Driver Development. Dr.Dobb’s[J].Journal of Software Tools for Professional Programmer,1998.

    嵌入式數控轉塔沖床數控系統無線通信與實時控制的實現*

    吝偉偉?,鐘佩思,呂曉東,葛 旋

    山東科技大學先進制造技術研究中心,青島 266590

    針對當前廣泛使用的基于PC的數控系統存在的不足,提出一種基于嵌入式技術和微處理器的高實時性、多任務的嵌入式數控轉塔沖床數控系統。為滿足數控轉塔沖床對實時控制的要求,嵌入式操作系統選用WinCE7,硬件平臺由CORTEXA8微處理器和FPGA組合而成。分析了計算機與數控機床之間通信方式的現狀和對高效加工自動化的影響,提出了基于ZigBee的數控轉塔沖床無線通信方案并介紹了數控系統實時控制的實現。結果表明:ZigBee模塊通信正常,能實現上位機與嵌入式控制器之間的數據收發,降低了企業成本,提高了生產效率。

    WinCE7;嵌入式數控系統;ZigBee;無線通信;實時控制

    TP274

    10.3969/j.issn.1001-3881.2014.18.018

    2014-04-21

    *Project supported by the Shandong Province Natural Science Fund Project(ZR2011EEM014)

    ?Wei-wei LIN,E-mail:sklinwei@163.com

    猜你喜歡
    嵌入式操作系統轉塔實時控制
    雙足步行機器人嵌入式控制系統設計分析
    光電轉塔自動搜索跟蹤監視低小慢目標控制方法
    激光與紅外(2021年3期)2021-04-07 12:22:06
    FPSO改裝項目內部轉塔系統及安裝工藝
    造船技術(2020年2期)2020-05-18 06:53:28
    典型實時嵌入式操作系統應用分析
    電子測試(2018年23期)2018-12-29 11:11:30
    基于LabVIEW微電網實驗平臺監控系統的設計與實現
    探討ERP系統環境下企業會計的實時控制
    轉塔刀架快速設計方法研究
    基于嵌入式操作系統的工業采集板設計
    應用服務型人才培養體系下的嵌入式操作系統教學改革探索
    空間機器人的計算力矩實時控制方法
    大片电影免费在线观看免费| 91在线精品国自产拍蜜月| 亚洲av免费高清在线观看| 亚洲精品乱码久久久v下载方式| 国产精品不卡视频一区二区| av在线观看视频网站免费| 亚洲av.av天堂| 久久人人爽av亚洲精品天堂| 少妇人妻精品综合一区二区| 一级爰片在线观看| 亚洲精品aⅴ在线观看| av免费在线看不卡| 夜夜骑夜夜射夜夜干| 香蕉精品网在线| a级片在线免费高清观看视频| 人妻一区二区av| 免费av不卡在线播放| 亚洲欧美精品自产自拍| 最新中文字幕久久久久| 久久韩国三级中文字幕| 99热这里只有精品一区| .国产精品久久| 欧美人与性动交α欧美精品济南到 | 日韩三级伦理在线观看| 国产精品久久久久成人av| 欧美日韩亚洲高清精品| 成人免费观看视频高清| 国产欧美日韩综合在线一区二区| 嫩草影院入口| av在线老鸭窝| 人妻夜夜爽99麻豆av| 最近最新中文字幕免费大全7| 精品少妇内射三级| 亚洲国产成人一精品久久久| 一个人看视频在线观看www免费| 2022亚洲国产成人精品| 黄片播放在线免费| 纯流量卡能插随身wifi吗| 熟妇人妻不卡中文字幕| 国产免费现黄频在线看| 色吧在线观看| 国产精品久久久久成人av| 久久久a久久爽久久v久久| 国产高清不卡午夜福利| 一本色道久久久久久精品综合| 99九九在线精品视频| 欧美日韩亚洲高清精品| 亚洲成人av在线免费| 亚洲欧洲国产日韩| 亚洲成人手机| 乱人伦中国视频| 日本黄色日本黄色录像| 两个人的视频大全免费| 91国产中文字幕| 菩萨蛮人人尽说江南好唐韦庄| 亚洲怡红院男人天堂| 97超视频在线观看视频| 国产精品女同一区二区软件| 热re99久久国产66热| 毛片一级片免费看久久久久| av不卡在线播放| 欧美精品亚洲一区二区| 狂野欧美激情性bbbbbb| 久久99热6这里只有精品| 久久精品夜色国产| 美女视频免费永久观看网站| 亚洲中文av在线| 亚洲精品日韩av片在线观看| 精品卡一卡二卡四卡免费| 亚洲美女搞黄在线观看| 国产免费现黄频在线看| 欧美精品国产亚洲| 人妻系列 视频| 18+在线观看网站| 国产黄色免费在线视频| 亚洲欧美日韩卡通动漫| tube8黄色片| 夜夜看夜夜爽夜夜摸| 亚洲一级一片aⅴ在线观看| 日韩欧美精品免费久久| h视频一区二区三区| av网站免费在线观看视频| 国产男女内射视频| 啦啦啦啦在线视频资源| 免费高清在线观看日韩| 亚洲欧美成人综合另类久久久| 久久久国产一区二区| 久久综合国产亚洲精品| 亚洲高清免费不卡视频| 51国产日韩欧美| 亚洲精品久久午夜乱码| 欧美bdsm另类| 亚洲综合色网址| 伦理电影免费视频| 黄色毛片三级朝国网站| 女的被弄到高潮叫床怎么办| 在线观看免费视频网站a站| 成人毛片60女人毛片免费| 国产成人91sexporn| 天美传媒精品一区二区| 国内精品宾馆在线| 热99国产精品久久久久久7| 精品99又大又爽又粗少妇毛片| 欧美激情 高清一区二区三区| 精品熟女少妇av免费看| 视频在线观看一区二区三区| 婷婷色综合大香蕉| 最新中文字幕久久久久| 十分钟在线观看高清视频www| 国产国拍精品亚洲av在线观看| 亚洲欧美一区二区三区国产| 国产一区二区三区综合在线观看 | 色吧在线观看| 午夜福利影视在线免费观看| 国产淫语在线视频| 亚洲色图 男人天堂 中文字幕 | 一区二区三区免费毛片| 亚洲少妇的诱惑av| 午夜福利在线观看免费完整高清在| 国产男女内射视频| 美女视频免费永久观看网站| 99国产精品免费福利视频| 少妇丰满av| 日韩免费高清中文字幕av| 国产免费又黄又爽又色| 一区二区三区精品91| 国产av国产精品国产| 国产深夜福利视频在线观看| 欧美精品一区二区大全| 国精品久久久久久国模美| 日日啪夜夜爽| 天天操日日干夜夜撸| 国产片内射在线| 国产精品久久久久久精品古装| 国产在线免费精品| 日韩大片免费观看网站| 麻豆精品久久久久久蜜桃| 欧美日本中文国产一区发布| 亚州av有码| 午夜激情av网站| 久久av网站| 久久久久精品久久久久真实原创| 一本一本综合久久| 免费看光身美女| 日本wwww免费看| 日韩亚洲欧美综合| 人妻制服诱惑在线中文字幕| 亚洲综合色网址| a级毛色黄片| 五月开心婷婷网| 成人国语在线视频| 在线免费观看不下载黄p国产| 亚洲性久久影院| 搡女人真爽免费视频火全软件| 久久国内精品自在自线图片| 亚洲性久久影院| 九九久久精品国产亚洲av麻豆| 亚洲精品日本国产第一区| 亚洲欧美成人精品一区二区| 最近最新中文字幕免费大全7| 亚洲欧美一区二区三区国产| 精品少妇黑人巨大在线播放| av免费在线看不卡| 超碰97精品在线观看| 99精国产麻豆久久婷婷| 亚洲av电影在线观看一区二区三区| 纯流量卡能插随身wifi吗| 一边亲一边摸免费视频| 久久99热6这里只有精品| 亚洲av二区三区四区| 亚洲av福利一区| 日韩 亚洲 欧美在线| 日韩电影二区| 精品人妻一区二区三区麻豆| 熟妇人妻不卡中文字幕| 免费大片黄手机在线观看| 日产精品乱码卡一卡2卡三| 青青草视频在线视频观看| 国产乱人偷精品视频| 久久热精品热| 一区二区三区乱码不卡18| 国产av一区二区精品久久| 日韩伦理黄色片| 亚洲精品日本国产第一区| 在线精品无人区一区二区三| 欧美精品国产亚洲| 亚洲精品乱码久久久v下载方式| 人成视频在线观看免费观看| 色视频在线一区二区三区| 亚洲av不卡在线观看| 午夜福利在线观看免费完整高清在| 中国国产av一级| 内地一区二区视频在线| 伊人亚洲综合成人网| 国精品久久久久久国模美| 黄色欧美视频在线观看| 亚洲av成人精品一二三区| 亚洲精品日本国产第一区| 99国产精品免费福利视频| 97超视频在线观看视频| 亚洲精品国产av蜜桃| 久久女婷五月综合色啪小说| 搡老乐熟女国产| 黑人巨大精品欧美一区二区蜜桃 | 欧美人与性动交α欧美精品济南到 | 国产成人精品在线电影| 夫妻午夜视频| tube8黄色片| 日本av免费视频播放| 99久久精品国产国产毛片| 97超碰精品成人国产| 日韩制服骚丝袜av| 久久精品久久久久久久性| 中文字幕人妻丝袜制服| 中文字幕av电影在线播放| 日本欧美视频一区| 精品一区二区免费观看| 超碰97精品在线观看| 亚洲欧美一区二区三区黑人 | 日韩av免费高清视频| 国产精品久久久久久精品古装| 免费观看在线日韩| 久久国产亚洲av麻豆专区| 久久精品熟女亚洲av麻豆精品| 欧美人与性动交α欧美精品济南到 | 亚洲av欧美aⅴ国产| 91在线精品国自产拍蜜月| 免费人成在线观看视频色| 国产熟女午夜一区二区三区 | 国产午夜精品久久久久久一区二区三区| 亚洲精品国产av成人精品| 99re6热这里在线精品视频| 亚洲一级一片aⅴ在线观看| 性色av一级| 国产免费福利视频在线观看| 最近中文字幕高清免费大全6| 精品一区二区三卡| 精品久久久久久电影网| 亚洲精品中文字幕在线视频| 亚洲精品视频女| av电影中文网址| 国产成人freesex在线| 中文精品一卡2卡3卡4更新| 亚洲国产欧美日韩在线播放| 91午夜精品亚洲一区二区三区| 精品少妇内射三级| 亚洲精品美女久久av网站| 国产男女内射视频| 午夜影院在线不卡| 亚洲av男天堂| 午夜精品国产一区二区电影| 亚洲精品视频女| 一本久久精品| 久久久久久久久久久免费av| 精品一区在线观看国产| 男人添女人高潮全过程视频| 成人国产麻豆网| 日韩一区二区三区影片| 国产女主播在线喷水免费视频网站| 亚洲精品av麻豆狂野| 99久久精品一区二区三区| 99热网站在线观看| 熟妇人妻不卡中文字幕| 美女主播在线视频| 天堂俺去俺来也www色官网| 在线看a的网站| 亚洲高清免费不卡视频| 国产色爽女视频免费观看| 女性生殖器流出的白浆| 在线观看免费视频网站a站| 18在线观看网站| 国产一区亚洲一区在线观看| 2021少妇久久久久久久久久久| 久久久国产欧美日韩av| 在线看a的网站| 狂野欧美激情性xxxx在线观看| 中文字幕精品免费在线观看视频 | 亚洲天堂av无毛| 国产片内射在线| 日韩欧美精品免费久久| 又黄又爽又刺激的免费视频.| 中文字幕人妻丝袜制服| 26uuu在线亚洲综合色| av在线播放精品| 内地一区二区视频在线| 免费观看在线日韩| 亚州av有码| 韩国av在线不卡| 91精品三级在线观看| 亚洲av成人精品一二三区| 一本久久精品| 日韩精品免费视频一区二区三区 | 99国产精品免费福利视频| 最新中文字幕久久久久| 欧美 亚洲 国产 日韩一| av视频免费观看在线观看| 国产午夜精品久久久久久一区二区三区| 国产成人a∨麻豆精品| 欧美一级a爱片免费观看看| 天天躁夜夜躁狠狠久久av| 亚洲情色 制服丝袜| 成人二区视频| 精品国产一区二区三区久久久樱花| xxx大片免费视频| 国产亚洲一区二区精品| 蜜臀久久99精品久久宅男| a 毛片基地| 高清午夜精品一区二区三区| 大片免费播放器 马上看| 久久久久久久久久成人| 亚洲欧美色中文字幕在线| 日本wwww免费看| 女的被弄到高潮叫床怎么办| 3wmmmm亚洲av在线观看| 晚上一个人看的免费电影| 国产黄色免费在线视频| 一边摸一边做爽爽视频免费| 亚洲精品久久久久久婷婷小说| 男人爽女人下面视频在线观看| 亚洲成人av在线免费| 久久99热这里只频精品6学生| 久久久欧美国产精品| 少妇的逼好多水| 午夜影院在线不卡| 亚洲av男天堂| 亚洲欧美日韩另类电影网站| 91久久精品电影网| a级毛片黄视频| 亚洲欧美精品自产自拍| 五月天丁香电影| av.在线天堂| 一区二区三区乱码不卡18| 成人亚洲精品一区在线观看| 最近中文字幕高清免费大全6| 午夜福利,免费看| 成人影院久久| 国产又色又爽无遮挡免| 久久久精品94久久精品| 日韩电影二区| 多毛熟女@视频| 黄色欧美视频在线观看| 午夜激情久久久久久久| 国产成人精品一,二区| 美女国产视频在线观看| videos熟女内射| 精品国产一区二区久久| 日日啪夜夜爽| 一本—道久久a久久精品蜜桃钙片| 亚洲av在线观看美女高潮| 久久精品久久久久久噜噜老黄| 亚洲国产欧美日韩在线播放| 欧美bdsm另类| 久久精品国产a三级三级三级| 少妇被粗大猛烈的视频| 丝瓜视频免费看黄片| 国产国语露脸激情在线看| 啦啦啦啦在线视频资源| 五月伊人婷婷丁香| 中文字幕制服av| 美女主播在线视频| 欧美成人午夜免费资源| www.色视频.com| 中文字幕免费在线视频6| 制服诱惑二区| 狠狠精品人妻久久久久久综合| 日韩中字成人| 亚洲美女搞黄在线观看| 99热网站在线观看| 欧美精品高潮呻吟av久久| 成人国语在线视频| 中文字幕久久专区| 久久久国产一区二区| 欧美97在线视频| 亚洲av福利一区| 黄色欧美视频在线观看| 多毛熟女@视频| 赤兔流量卡办理| 亚洲精品国产色婷婷电影| av视频免费观看在线观看| av一本久久久久| 考比视频在线观看| 国产精品女同一区二区软件| 久久久久国产网址| 一区二区三区免费毛片| 狠狠婷婷综合久久久久久88av| 国语对白做爰xxxⅹ性视频网站| 99精国产麻豆久久婷婷| 老司机亚洲免费影院| 午夜福利网站1000一区二区三区| 狂野欧美白嫩少妇大欣赏| 精品人妻偷拍中文字幕| 久久99热6这里只有精品| 国产黄频视频在线观看| 国产精品蜜桃在线观看| 人人妻人人澡人人看| 久久精品国产a三级三级三级| 色婷婷av一区二区三区视频| 国产精品麻豆人妻色哟哟久久| 一本色道久久久久久精品综合| 久久久久久久亚洲中文字幕| √禁漫天堂资源中文www| 赤兔流量卡办理| 国产日韩一区二区三区精品不卡 | 有码 亚洲区| av专区在线播放| 91久久精品国产一区二区三区| 国产不卡av网站在线观看| av天堂久久9| 在线精品无人区一区二区三| 男男h啪啪无遮挡| 成人亚洲精品一区在线观看| 久久国内精品自在自线图片| 91午夜精品亚洲一区二区三区| 人妻系列 视频| 欧美日韩视频精品一区| 乱人伦中国视频| 亚洲精品乱久久久久久| 久热这里只有精品99| 搡老乐熟女国产| 亚洲久久久国产精品| 久久 成人 亚洲| 亚洲成色77777| 亚洲精品国产av成人精品| 久久99一区二区三区| 亚洲欧美一区二区三区国产| 日本av免费视频播放| 亚洲精品国产av蜜桃| 国产成人91sexporn| 在线观看一区二区三区激情| √禁漫天堂资源中文www| 久久亚洲国产成人精品v| 黄色怎么调成土黄色| 久久精品人人爽人人爽视色| 国产精品久久久久成人av| 中文天堂在线官网| 人妻系列 视频| 美女主播在线视频| 日本91视频免费播放| 自拍欧美九色日韩亚洲蝌蚪91| 欧美变态另类bdsm刘玥| av国产精品久久久久影院| 夫妻性生交免费视频一级片| 大香蕉97超碰在线| 亚洲精品久久久久久婷婷小说| 亚洲国产欧美日韩在线播放| 久久久久久久久大av| 国产色婷婷99| 久久久久人妻精品一区果冻| 看免费成人av毛片| 夜夜骑夜夜射夜夜干| 母亲3免费完整高清在线观看 | 久久影院123| 久久久久国产网址| 中文字幕精品免费在线观看视频 | 97在线视频观看| 欧美激情 高清一区二区三区| 亚洲色图综合在线观看| 肉色欧美久久久久久久蜜桃| 日韩 亚洲 欧美在线| 欧美日韩视频精品一区| videos熟女内射| 一级a做视频免费观看| 在线播放无遮挡| 久久青草综合色| 欧美人与善性xxx| 99九九线精品视频在线观看视频| a 毛片基地| 精品久久久噜噜| 国产欧美日韩综合在线一区二区| 蜜桃国产av成人99| 亚洲国产精品999| 日韩av免费高清视频| 亚洲精品一区蜜桃| 成人黄色视频免费在线看| 国产黄色视频一区二区在线观看| av.在线天堂| 18禁在线无遮挡免费观看视频| 人人妻人人爽人人添夜夜欢视频| 国产精品欧美亚洲77777| 免费人成在线观看视频色| 黑人高潮一二区| 国产日韩欧美亚洲二区| 草草在线视频免费看| 久热久热在线精品观看| 免费人妻精品一区二区三区视频| 曰老女人黄片| 制服丝袜香蕉在线| 99九九在线精品视频| 性高湖久久久久久久久免费观看| xxxhd国产人妻xxx| 午夜福利,免费看| 久久影院123| 久久久欧美国产精品| 亚洲,一卡二卡三卡| 在线天堂最新版资源| 久久久久国产精品人妻一区二区| 日本午夜av视频| 国产亚洲精品第一综合不卡 | 日本av手机在线免费观看| 亚洲国产日韩一区二区| 亚洲av免费高清在线观看| 视频在线观看一区二区三区| 亚洲精品乱码久久久v下载方式| 国产亚洲欧美精品永久| 亚洲精品美女久久av网站| 免费观看的影片在线观看| 久久99精品国语久久久| 老熟女久久久| 激情五月婷婷亚洲| 波野结衣二区三区在线| 曰老女人黄片| 日韩伦理黄色片| 精品一区二区三卡| 日本av手机在线免费观看| 中文字幕人妻丝袜制服| 性色av一级| av免费在线看不卡| 国产伦理片在线播放av一区| 人妻人人澡人人爽人人| 日产精品乱码卡一卡2卡三| 亚洲精品一区蜜桃| 久久ye,这里只有精品| 亚洲av二区三区四区| 九色亚洲精品在线播放| 搡女人真爽免费视频火全软件| 亚洲精品久久成人aⅴ小说 | 美女中出高潮动态图| 色视频在线一区二区三区| av.在线天堂| 国产无遮挡羞羞视频在线观看| 久久精品国产自在天天线| av在线老鸭窝| 在线观看国产h片| 人人妻人人澡人人爽人人夜夜| 黄色视频在线播放观看不卡| av福利片在线| 日韩精品免费视频一区二区三区 | 午夜老司机福利剧场| 一级,二级,三级黄色视频| 国产爽快片一区二区三区| 免费久久久久久久精品成人欧美视频 | 在线观看免费日韩欧美大片 | 国产欧美日韩一区二区三区在线 | 麻豆精品久久久久久蜜桃| 国产精品 国内视频| 亚洲欧美一区二区三区国产| 又大又黄又爽视频免费| 久热这里只有精品99| 久久国产亚洲av麻豆专区| 三级国产精品欧美在线观看| 欧美成人精品欧美一级黄| av又黄又爽大尺度在线免费看| 亚洲久久久国产精品| 我要看黄色一级片免费的| 18在线观看网站| 精品亚洲乱码少妇综合久久| 国产精品一区二区在线不卡| 美女脱内裤让男人舔精品视频| 丰满饥渴人妻一区二区三| 最近最新中文字幕免费大全7| 麻豆成人av视频| 免费日韩欧美在线观看| 少妇丰满av| 亚洲人成网站在线观看播放| 少妇猛男粗大的猛烈进出视频| 亚洲激情五月婷婷啪啪| 亚洲图色成人| 国产精品一区二区在线不卡| 肉色欧美久久久久久久蜜桃| 国产精品久久久久久精品古装| 啦啦啦在线观看免费高清www| 欧美+日韩+精品| 我要看黄色一级片免费的| 午夜av观看不卡| 一级毛片aaaaaa免费看小| 日韩成人av中文字幕在线观看| 亚洲精品aⅴ在线观看| 狠狠精品人妻久久久久久综合| 激情五月婷婷亚洲| 高清午夜精品一区二区三区| 美女视频免费永久观看网站| 亚洲欧洲日产国产| 最近中文字幕2019免费版| 建设人人有责人人尽责人人享有的| 黑人高潮一二区| 九草在线视频观看| 中文乱码字字幕精品一区二区三区| 国产一区二区在线观看日韩| 午夜免费男女啪啪视频观看| 美女cb高潮喷水在线观看| 亚洲色图 男人天堂 中文字幕 | 午夜免费男女啪啪视频观看| 亚洲高清免费不卡视频| 大话2 男鬼变身卡| 99热全是精品| 久久久久久久久久久丰满| 大香蕉久久成人网| 日韩一区二区三区影片| 亚洲精品日韩av片在线观看| 久久精品国产a三级三级三级| 亚洲av福利一区| 午夜免费观看性视频| 国产精品免费大片| av视频免费观看在线观看| 国产成人av激情在线播放 | 最近的中文字幕免费完整| 日本-黄色视频高清免费观看| 免费日韩欧美在线观看| 欧美日韩成人在线一区二区| 老熟女久久久| 日韩中文字幕视频在线看片| 久热这里只有精品99| 制服人妻中文乱码| 伊人久久精品亚洲午夜| 丰满少妇做爰视频|