• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Adsorptive Removal of Para-chlorophenol Using Stratified Tapered Activated Carbon Column

    2012-10-31 03:35:06SzeandMcKay

    M.F.F. Sze and G. McKay*

    Department of Chemical and Biomolecular Engineering, the Hong Kong University of Science and Technology,Hong Kong, China

    Adsorptive Removal of Para-chlorophenol Using Stratified Tapered Activated Carbon Column

    M.F.F. Sze and G. McKay*

    Department of Chemical and Biomolecular Engineering, the Hong Kong University of Science and Technology,Hong Kong, China

    The feasibility of adsorptive removal of single component organic compound (para-chlorophenol) by Calgon Filtrasorb 400 (F400) carbon was investigated. The Redlich-Peterson equation was found to be the best fit model for describing the equilibrium relationship between the para-chlorophenol adsorption onto F400 carbon. Four adsorption columns with different column geometry and adsorbent particle stratification were used to examine the adsorption kinetics onto F400 carbons. The Bed Depth Service Time (BDST) model was applied and modified to analyse the performance of the columns and the effect of different operating variables. When combining the effects of adsorption efficiency and the associated pressure drop of each type of adsorption columns tested, the carbon stratified tapered column has been determined to be the most efficient engineering option for removing organics, in which the enhancement of the adsorbent bed in terms of longer breakthrough time and higher saturation percentage is the greatest amongst the four types of columns with reasonably small pressure drop across the fixed-bed column.

    adsorption, para-chlorophenol, activated carbon, tapered column, bed depth service time model, pressure drop

    1 INTRODUCTION

    1.1 Application and toxicity of chlorophenol

    Chlorophenols (a total of 19 congeners exist) are a large category of chemicals with chlorine atoms(between one and five) attached to the phenolic structure.They are normally used in herbicides [1], insecticides [2],wood preservatives and industries as synthesis intermediates or as raw materials in the manufacturing of pharmaceuticals and dyes [3]. According to Pera-Titus et al. [3], the world market of chlorophenols is fairly stable and is ca. 100 kilo-tones per year, in which the production of heavy and light chlorophenols is ca.25-30 and 60 kilo-tones per year respectively.

    Not only because of the taste and odour problems even at concentrations below 0.1 μg·L?1[4], chlorophenols cause severe adverse effects such as toxicity,carcinogenicity [5, 6] and degradation of the water quality for consumptive use. Some phenolic compounds are listed as a group of toxic pollutants by the US Environmental Protection Agency (USEPA) [7]and by the European Decision 2455/2001/EC [8].

    1.2 Adsorptive removal of chlorophenol

    In the past few years, more researches have focused on the development of modified activated carbon to enhance the adsorption effectiveness (adsorption capacity and kinetic) towards organic adsorbates,for example, Przepiórski [9] reported the enhanced adsorption of phenol from water by ammonia-treated activated carbon. However, just a few researches focused on the enhancement of efficiency and utilisation for the adsorption process when used in industrial scale.Hence one of the main objectives of this research is to explore this aspect in depth.

    1.3 Fixed-bed adsorption column

    Fixed-bed carbon adsorption columns are commonly used in industrial wastewater treatment systems.Industrial effluents flow through a vertical column packing with activated carbons at a constant rate which adsorb organics onto the highly porous surface. Once the column operation commenced, the carbon bed eventually lost its function and the effluent concentration from the column approached that of the influent,indicating that the column is breakthrough and carbon is spent. However, as to fulfil the stringent legislation set for water pollution standards, adsorption column would never operate until the full saturation of the carbon bed. The column operation would be stopped prior to a point—breakthrough point (where the exit concentration of the solutes being removed starts to increase sharply to some predetermined level [10]),which is the maximum tolerance limit of the standards,the continuous operation of carbon adsorption column after this point would not meet the legislative standards.

    The adsorption column process is terminated upon reaching its breakthrough capacity, but the whole adsorbent bed is not completely loaded, especially the adsorbent at the outlet of the column. This inefficient use of adsorbent will lead to the high inventory of adsorbent and hence increase the operating cost. Hence the principal focus of this research is to enhance theadsorbent bed utilisation, which may lengthen the adsorbent bed service time and reduce the adsorbent regeneration frequency.

    1.4 Cylindrical column and tapered column operation

    The conventional cylindrical fixed-bed column is commonly used in industries. Basmadjian [11] proposed a reverse stratified tapered adsorber (RSTA)with varying cross-sectional area and different adsorbent particles arranged in a reverse layering of adsorbent size. This bed geometry provides a unique superficial velocity profile for the adsorbate solution,which influences the residence time of adsorbate and the extent of the external mass transfer film thickness around the adsorbent particles.

    1.5 Stratification of adsorbent particle in fixed-bed column

    It is advantageous to use finer adsorbent particles in packed bed adsorption column, however the excessive pressure drop associated hinders its feasibility.With a particle arrangement, powdered particles could be used as a portion in adsorbent bed, without increasing the pump power tremendously. Mathews [12]and Pota and Mathews [13] both demonstrated that adsorption columns with particle layering/stratification perform better than columns using uniform particle size.

    2 THEORY

    2.1 Equilibrium isotherm modelling

    2.1.1 Langmuir model

    The Langmuir [14] isotherm model is written as

    where qeis the amount of adsorbate being adsorbed per adsorbent mass at equilibrium, Ceis the equilibrium liquid phase adsorbate concentration.

    The ratio of KL/aL(qm) accounts for the maximum adsorption capacity defined by Langmuir isotherm, and is also called the monolayer adsorption capacity.

    2.1.2 Freundlich Model

    Freundlich [15] proposed the adsorption equilibrium data could be described by the following relationship

    where KFand 1/nFare characteristic constants.

    2.1.3 Redlich-Peterson model

    The Redlich-Peterson isotherm is a three-parameter isotherm proposed by Redlich and Peterson [16]:

    2.1.4 Sips model

    The Sips isotherm [17] is a combination of Langmuir and Freundlich isotherms and is given as:

    2.2 Adsorption column modelling

    Bed depth service time model

    Bohart and Adams [18] developed an equation describing the relationship between service time (t)and bed height (Z) for a fixed-bed adsorber. The Bed Depth Service Time (BDST) model has been successfully applied for para-chlorophenol adsorption [19, 20]onto activated carbon. The BDST method can be used to predict the effects of different feed concentrations,flowrates or effluent compositions to the operation for fixed-bed column [21]. The traditional BDST model has not yet been applied for tapered adsorption columns, either with uniform particle size packing or stratification of particle size packing, in literature.Besides, the effect of the adsorbent particle size has not been incorporated in the model and hence could not be investigated.

    In the BDST model, the service time and bed height are correlated with the process parameters (N0and k) and initial feed concentration, feed volumetric flowrate and effluent composition.

    The adsorption capacity of a fixed amount of adsorbents diminishes at a rate given as:

    where k is the rate constant of adsorption.

    The solute concentration is diminishing at a rate as:

    where v is the solute velocity.

    As the volumetric sorption capacity of the bed is given as Noqe, and by integrating Eqs. (5) and (6),the proposed relationship between bed depth and service time would become Eq. (7).

    The service time was related to adsorption operating conditions as:

    where Cbis the adsorbate concentration at breakthrough and N0is the adsorption capacity of bed (bed capacity), k is the BDST adsorption rate constant, v is the interstitial velocity of adsorbate and C0is the initial adsorbate concentration.

    As the exponent term kN0Z/v is usually largerthan unity, hence Hutchins [21] proposed a linear relationship to this equation gives:

    Table 1 Textural properties of F400 activated carbon

    where t represents the breakthrough time at the bed depth Z reaching the breakthrough concentration Cb.The service time and bed height are correlated with the process parameters (N0and k) and initial pollutant concentration and volumetric flowrate of pollutant.

    The N0and k are optimised from Eq. (7) or Eq. (8)by minimising the SSE (sum of squared error) function between the experimental data and BDST model predicted values,

    Service time is referring to the time utilised by the adsorption column to reach the breakthrough point with a specific saturation percentage. The principal objective of fixed-bed adsorption column operation is to purify industrial effluents so that the effluent concentration is well below a predefined breakthrough value (Cb), in order to fulfil the legislation. Hence, the incipient 10%, 20% and 30% breakthrough percentage are selected and used in the BDST modelling for para-chlorophenol/F400 carbon systems.

    3 EXPERIMENTAL MATERIALS AND METHODOLOGY

    3.1 Materials

    3.1.1 Adsorbent

    The commercial Calgon Filtrasorb 400 (F400)activated carbon was purchased from the Calgon Carbon Corporation and was selected as the adsorbent for this research, because it is one of the most widely used adsorbents for water treatment. The virgin F400 carbons were crushed by a hammer mill, sieved and divided into different portions with specific particle size ranges, namely 125-150, 150-250, 250-355, 355-500,500-710 and 710-1000 μm. Each sieved portion was washed using deionised water, and was then dried thoroughly in an oven at 105 °C and stored individually in airtight containers to minimise the adsorption of volatile organic compounds and moisture.

    3.1.2 Adsorbates

    Para-chlorophenol (p-CP) with purity greater than 99% was purchased from the Aldrich Chemical.It was used as the single component adsorbate in this research. The molecular structure of p-CP (created by the ChemSketch software) is shown in Fig. 1. Table 2 shows some physical properties of the p-CP.

    Figure 1 Molecular structure of para-chlorophenol: (a)general structure; (b) and (c) spatial arrangements of the atoms in space showing the length, width and height of the molecule

    Table 2 Physical properties of para-chlorophenol

    3.2 Experimental setup and procedures

    3.2.1 Equilibrium adsorption isotherm studies

    A stock solution with a concentration of 250 mg·dm?3was prepared. A specific amount of adsorbate was weighed and added into a 2 dm3volumetric flask, deionised water was then added until the meniscus reached the graduated mark. This stock solution was used as a root for preparing a series of standard solutions with equal volume of 0.25 dm3. The concentrations of standard solutions and corresponding volumes of stock solution required in the isotherm study are shown in Table 3.

    A series of fixed volume (0.05 dm3) of standard solutions with known initial adsorbate concentrations were prepared and then pipetted to glass bottles,which contained 0.05 g of F400 carbon with respective particle size. The bottles were then sealed and agitated at a constant shaking rate of 200 r·min?1in a thermostatic shaker for 21 days to reach equilibrium.Afterwards, each sample was analysed using the Varian Cary 1E UV/Vis-spectrophotometer.

    Considering the mass balance on the adsorbents, theamount of adsorbate adsorbed, qe, can be calculated as:where C0and Ceare the initial and equilibrium adsorbate concentrations in solution respectively, V is the volume of the aqueous solution and m is the mass of dried F400 activated carbon.

    Table 3 Volume of stock solution required for each standard solution

    3.2.2 Fixed-bed adsorption column studies

    A pilot-scale adsorption column rig was constructed to carry out fixed-bed adsorption column studies. The schematic diagram for the adsorption column rig is shown in Fig. 2.

    The deionised water used was from the main supply and it was fed into a 50 dm3plastic container(T1). The deionised water then flowed into a similar tank (T2) by gravity feed. A known amount of adsorbate was added to this batch of 50 dm3of water and the solution was pumped into another bigger tank (T3).The pumps used (P1 and P2) and all the components which came into contact with process solution were made of inert plastic materials. The overflow solution was fed back into (T2) and this served to maintain constant agitation of the solutions.

    Samples were taken from a sampling point (S1)as well as from sampling point (S2) to record the initial value of pollutant concentration used in each experimental run. Influent to the adsorber columns was pumped via (P2) and a three-way valve (V6) served to control the recycle feedback to the tank (T3). Calibrated rotameters (F1) were used to control the adsorbate flowrate through the columns (C1). Finally, the effluent was collected in a waste disposal container which is designated for handling all kinds of final effluents.

    Rotameters (F1) were calibrated to give the correct flowrate and were maintained constant throughout each experimental run. At time zero, a step input in the adsorbate concentration was introduced to the flowing stream. Samples were taken at selected time interval until the adsorbate concentration was at the breakthrough point at the top of the bed. The samples were taken at various bed heights and were measured using the Varian Cary 1E UV/Vis-spectrophotometer.

    3.2.3 Classification of adsorption columns investigated

    Four types of fixed-bed adsorption columns with different column geometry and different carbon particle size packing are used to study the dynamic adsorption of para-chlorophenol onto F400 activated carbons under various operating conditions. Fig. 3 illustrates these four types of fixed-bed adsorption columns, namely,

    Type 1—cylindrical column with uniform particle size packing;

    Type 2—tapered column with uniform particle size packing;

    Type 3—cylindrical column with particle stratification packing; and

    Type 4—tapered column with particle stratification packing.

    Figure 2 Schematic diagram of pilot plant adsorption column rig

    Figure 3 Classifications of adsorption columns investigated

    F400 carbons with a single particle size range of 500-710 μm are used in Types 1 and 2 columns. Since only one particle size is involved, the packing density(bulk bed density) of the carbons is constant and hence the total bed heights of Types 1 and 2 columns employed are the same, i.e. 25 cm in total. However,the total bed heights in Types 3 and 4 columns are different from the first two types.

    Five stratified layers of carbons are packed in Types 3 and 4 columns for investigating the adsorption column operation to remove para-chlorophenol. Basically, the total mass of carbon used is the same for every adsorption column regardless of the column types. 215 g of F400 carbon with a uniform particle size of 500-710 μm is used for Types 1 and 2 columns,this mass basis is kept for Types 3 and 4 columns as well. Therefore, 43 g of each F400 carbon layer (with five different particle size range, namely 710-1000,500-710, 355-500, 250-355 and 150-250 μm) are used for para-chlorophenol systems. The coarsest F400 activated carbon was packed at the bottom part of the tapered column, while the finest was put on the top. Due to the variation of packing density of different portion of particle sizes, the overall bed height of the stratified columns used for para-chlorophenol is different. Since the total bed heights of both Types 3 and 4 columns are shorter than 25 cm, the last sampling point at 25 cm is able to represent the whole carbon bed in each column with a total mass of 215 g.

    4 RESULTS AND DISCUSSION

    4.1 Equilibrium adsorption isotherm studies

    A series of glass bottles containing same amount of para-chlorophenol solutions and same mass of F400 carbon, but with different initial adsorbate concentrations, was shaken at constant speed of 200 r·min?1and temperature of 25 °C. To ensure the adsorption process has reached equilibrium, all samples were collected and the adsorbate concentrations were measured after being shaken for 21 days.

    The solid phase adsorbate concentrations of each sample (qe,meas) were determined experimentally using Eq. (10). Theoretical solid phase adsorbate concentrations (qe,calc) were calculated using Eqs. (1) to (4). The isotherm constants of each single component isotherm model were determined using the Sum of Squared Error (SSE) analysis. Isotherm constants in each model were optimised by minimising the values of the SSE function, which is represented mathematically as

    where p is the total number of equilibrium adsorption isotherm data points.

    The experimental data points and four isotherm models for para-chlorophenol are plotted in Fig. 4. The isotherm parameters are summarised in Table 4. Based on the SSE values, the Redlich-Peterson isotherm model gives the lowest error value for para-chlorophenol(SSE 1412) adsorption onto F400 carbon. The Redlich-Peterson equation often describes the isotherm better than the classical equations because of its mathematical flexibility.

    Figure 4 Four equilibrium isotherm plots for adsorption of para-chlorophenol and Acid Blue 25 onto F400 carbon(carbon particle size 500-710 μm, shaking speed=200 r·min?1,solution temperature 25 °C)◆ Experimental; Langmuir; Freundlich; RP;Sips

    Table 4 Equilibrium isotherm parameters for adsorption of para-chlorophenol and onto F400 carbon

    4.2 Adsorption fixed-bed column studies

    4.2.1 BDST model prediction of para-chlorophenol/F400 carbon adsorption column system

    Since the linear BDST model equation does not include the particle size variation, hence the analysis could be separated into two main groups, i.e. cylindrical adsorption columns (Types 1 and 3 columns) and tapered adsorption columns (Types 2 and 4 columns).

    For cylindrical adsorption columns (Types 1 and 3 columns), Eq. (8) has the linear form as:

    with the slope of this equation:

    and the intercept of this equation represents:

    Tapered columns (Types 2 and 4 columns) possess a different configuration compared to conventional constant diameter columns. The diameters of tapered columns are varied at different bed depths (or termed as bed heights). Hence the original BDST model would not be applicable in tapered columns directly as the interstitial velocity of adsorbate is changing along the columns.

    By simple geometry, the interstitial velocity of adsorbate (v) at different bed heights (Z) could be defined as a function of bed height, as shown in Fig. 5.

    Figure 5 Schematic diagram of the transverse section of a tapered column

    The interstitial velocity of adsorbate (v) in the tapered column at bed height Z is calculated as:

    where r is the column radius at bed height Z, r1is the column radius at inlet bed height (Z=0), εbis the bed porosity and θ is the tapered angle.

    For tapered adsorption columns (Types 2 and 4 columns), therefore, the original BDST and linearised BDST model become Eqs. (7) and (8) respectively.

    The original BDST model is fitted for para-chlorophenol/F400 carbon column studies first to check if the value of the exponent term kN0Z/v is larger than unity, and the simpler linearised BDST model is consequently done. The parameters N0and k in both models are optimised by minimising the SSE function of Eq. (9). Table 5 summarizes the optimised N0and k of the original BDST model for para-chlorophenol/F400 carbon adsorption column studies.

    The exponent term, which is calculated as kN0Z/v,is varying with bed heights for cylindrical columns(Types 1 and 3 columns), and it is changing with the bed heights and interstitial velocity of adsorbate in tapered columns (Types 2 and 4 columns). As a result,there is a range of the exponent values in each adsorption column for para-chlorophenol/F400 carbon system. The exponent terms in the original BDST model for para-chlorophenol/F400 carbon system (shown in Table 5) are much larger than unity, hence the linear form of the BDST proposed by Hutchins is valid to be used.

    Figure 6 illustrates both predictions from the original BDST and linearised BDST models for Type 1 column removing para-chlorophenol, it is obvious that both models give the exact simulated plot to the experimental data points. Besides, the experimental data points of cylindrical columns are exhibiting a linear relationship between the bed depth and service time, which is in accordance with Eq. (8). The high R2value of 0.9999 indicates the bed depths are well in a linear relationship with experimental service time.

    The linearised BDST model described in Eqs. (8)and (18) are used for the cylindrical columns (Types 1 and 3 columns) and tapered columns (Types 2 and 4columns) respectively. The Z0, N0and k values of each column are summarised in Table 6. The optimised N0and k values using the original BDST and linearised BDST models are almost identical, which indicate that the linearised BDST model is valid and appropriate to predict the para-chlorophenol/F400 carbon adsorption column system, with less complexity and good accuracy in fitting the experimental data. Hence, linearised BDST model equations represented by Eqs. (8) and(18) are used for predicting para-chlorophenol/F400 carbon system.

    Table 5 Model parameters of original BDST model for the para-chlorophenol/F400 carbon fixed-bed adsorption column operation

    Figure 6 Original BDST and linearised BDST model predictions of Type 1 column (para-chlorophenol, cylindrical column, Q=200 ml·min?1, C0=200 mg·L?1, dp=500-710 μm,20% breakthrough)original BDST; linearized BDST

    Figure 7 BDST model prediction of Types 1 to 4 columns(para-chlorophenol, Q 200 ml·min?1, C0=200 mg·L?1, 20%breakthrough)◆ Type 1; ■ Type 2; ▲ Type 3; ● Type 4

    4.2.2 Comparison of BDST model predicted results for four different types of columns

    Types 1 to 4 columns, which are operated under the same conditions (Q 200 ml·min?1, C0200 mg·L?1, M 215 g) are compared using the BDST model, and Fig. 7 illustrates the BDST plot of thesecolumns for 20% breakthrough. Obviously, the slope of the BDST plots of cylindrical columns (Types 1 and 3 columns) are linear, which is represented by Eq. (8),while they are curved for tapered columns (Types 2 and 4 columns) and in accordance with Eq. (11).

    Table 6 Model parameters of linearised BDST model for the para-chlorophenol/F400 carbon fixed-bed adsorption column operation

    In Fig. 7, the cylindrical columns exhibit longer service time than tapered columns, while the stratified columns show superior performance compared with non-stratified columns. In fact, the service time of the beds at the last sampling point of the Types 3 and 4 columns are very close, and those for Types 1 and 2 columns are almost identical. This indicates the top part of the tapered column, with smaller particle size packing and slower interstitial adsorbate velocity, is more efficient in removing para-chlorophenol than the bottom portion of the bed. From a practical operational point of view, the last sampling point is always the focus of a single adsorption column, since this point represents the same mass of carbon used and hence is more representative to be used for comparison. As a result,both Types 1 and 2 columns without particle stratification do not show any significant difference in terms of service time, while the service time of the stratified cylindrical column is about 5% longer than that of the stratified 5 degree tapered column. Besides, the optimised adsorption capacity values from the minimisation process of BDST model (listed in Table 6) also suggest stratified columns are superior to non-stratified columns, with 19% and 16% increase of the BDST adsorption capacity for tapered bed and cylindrical bed respectively.

    4.2.3 Dependence of BDST adsorption capacity on the tapered angle

    According to Table 6, the BDST adsorption capacity optimised for each type of column could not be compared directly, due to a dependence of BDST adsorption capacity on the tapered angle. The optimised adsorption capacity decreased with increasing tapered angle. Fig. 8 shows the correlation of averaged BDST adsorption capacity with the tapered angle, which is inferred from the high value of regression value(R20.9946). Hence, the BDST model equation with the incorporation of tapered angle becomes Eqs. (19)and (20) for predicting the cylindrical columns and tapered columns respectively.where N0,θis the BDST adsorption capacity for θ degree tapered column and N0,0is the BDST adsorption capacity for cylindrical column.

    Figure 8 Correlation of BDST adsorption capacity with tapered angle for para-chlorophenol/F400 carbon column system

    Actually, Eq. (19) is reduced and approximately equal to Eq. (8) for cylindrical columns with θ0.

    4.3 Estimation of pressure drop using Ergun’s equation

    For liquid phase system, the effect of pressure drop on the solute concentration (fluid density) is negligible [23], hence, the pressure drop is excluded from the design calculation of the fixed-bed reactor. But the pressure drop exerted by the friction when the liquid flow through a packed bed is a critical factor determining the pumping energy required, and eventually link up with the operating cost and capital cost of a wastewater treatment plant employing adsorption columns as unit operation.

    The required pump power strongly depends on particle geometry, bed porosity, bed length and liquid flow characteristic, such as liquid flow rate (superficial velocity), liquid density and viscosity.

    From the aforementioned results, the columns with carbon particle stratification could sharpen the breakthrough curve at the column outlet, which in turn would enhance the column service time, and reduce the frequency of adsorbent replacement or regeneration. Nevertheless, the pressure drop associated with the liquid flow may become a critical factor, if the columns are stratified into different layers and usually small carbon granules are involved.

    Particle geometry does not significantly affect usable adsorptive capacity, but reduction in particle size does improve the adsorption rate. Powdered carbons adsorb more rapidly than granular carbons and fine granules more rapidly than coarse ones [24]. However,powdered activated carbon is avoided for column operation because of the large pressure drop associated with small particulate or powdered beds.

    The pressure drop across a packed bed in an adsorption tower can be calculated using the friction factor correlation attributed to Ergun [25], which is given as:

    where fpand Repare the friction factor for the packed bed and the particle Reynolds number respectively,and defined as:

    where Δp is pressure drop across packed-bed, dpis particle diameter, ρ is density of adsorbate solution, vsis interstitial adsorbate velocity, εbis bed voidage and μ is the viscosity of adsorbate solution.

    Rearranging Eq. (22) gives

    The first and the second terms on the right-hand side of the Eq. (25) represent the pressure drop derived from the viscous effect and kinetic effect respectively,that is:Pressure drop term 1 (due to viscous effect):

    Pressure drop term 2 (due to kinetic effect):

    Actually, the Ergun’s equation combines the Kozeny-Carman equation with the Burke-Plummer equation, in which Kozeny-Carman equation is valid for Rep<10 (laminar flow), while the Burke-Plummer equation is valid for Rep>1000 (turbulent flow).

    For estimating the pressure drop across the packed bed, all adsorption columns investigated in the research are virtually segmented into layers with 0.1 m interval, and the Eq. (25) is used to calculate the pressure drop when the adsorbate solution flows through the packed bed. Table 7 summarizes the total pressure drop across the adsorbent bed of all columns investigated in this research. The para-chlorophenol/F400 carbon column system is used for demonstrating the effect of tapered angle, volumetric flowrate and particle size stratification on the pressure drop across the adsorbent bed.

    Comparison of pressure drop across the adsorbent bed in type 1 to 4 columns

    However, the total pressure drop does not necessarily increase with increasing the tapered angles; the pressure drop is reduced in the tapered columns after the introduction of particle size stratification. In Fig. 9,the total pressure drop shows a maximum value forthe Type 3 column, but the Type 4 column is exhibiting a lower pressure drop than Type 2 and 3 columns.The pressure drop concept across the packed bed is a crucial factor for determining the pump energy requirement of the whole adsorption system and hence affects the operating costs of a wastewater treatment plant using the adsorption column operation technique.Adsorption columns with small adsorbent packing usually show a significantly higher saturation percentage and hence longer service time [26, 27], but the significant pressure drop inhibits its feasibility. The stratified columns are superior to the non-stratified columns in term of the service time and saturation percentage of the adsorbent bed, in which the Type 4 column is slightly inferior to the Type 3 column.Therefore, combining the effects of the adsorption efficiency and the associated total pressure drop, the Type 4 columns become the most appropriate choice to be used in adsorption column operation. This is corroborated by the Pota and Mathews [13], who reported an adsorber configuration utilising both tapered geometry and stratification could enhance the breakthrough time and reduce the overall activated carbon bed head loss as compared with conventional cylindrical fixed-beds.

    Table 7 Pressure drop across the adsorbent bed within different types of columns for para-chlorophenol/F400 carbon systems

    Figure 9 The pressure drop term 1, pressure drop term 2 and total pressure drop associated with the para-chlorophenol flow through the different types of adsorption columns(Q=200 ml·min?1, C0=200 mg·L?1)

    5 CONCLUSIONS

    Various isotherm models (Langmuir, Freundlich,Redlich-Peterson and Sips equations) are employed for modeling the adsorption behaviors of p-chlorophenol adsorption. The experimental isotherm data are compared with theoretical predicted values using the Sum of Squared Error (SSE) analysis. The Redlich-Peterson equation is shown to be the best fit model, since it possesses the least SSE values amongst the isotherm models used, for describing the adsorption of the para-chlorophenol/F400 carbon system.

    The Bed Depth Service Time (BDST) model,which is one of the simplified design models, is used to describe the relationship between bed depth and the service time of an adsorption column. The linearised BDST model proposed by Hutchins is proved to be applicable as the original BDST model developed by Bohart and Adams, since the exponent term is always larger than unity. The linearised BDST model fits the experimental data of the para-chlorophenol/F400 carbon system well for cylindrical columns, regardless of particle size distribution packing inside. The linearised BDST model has been modified with the introduction of the variable interstitial adsorbate velocity, which is a function of bed height, and is implemented to correlate the experimental data obtained for the tapered columns.Those optimised BDST adsorption capacities for the tapered columns obtained in this research show a dependence on the tapered angles, regardless of the carbon particle stratification involved and have been found to be not specific to the adsorbate/adsorbent system.

    According to the BDST model predictions on all types of adsorption columns investigated for the para-chlorophenol/F400 carbon systems, the following findings were concluded. The service time and adsorption capacity of an adsorbent bed increased with increasing breakthrough percentages. Generally, the cylindrical columns exhibit longer service time than tapered columns, and the stratified columns show superior performance compared with the non-stratified columns. Considering the service time of the adsorbent bed exhibited by the last sampling point in each type of columns and the optimised BDST adsorption capacity values, amongst the stratified columns, the Type 3 column showed a slight improvement in the service time over that of the Type 4 column. Both Type 1 and 2 columns possess similar service time, which indicated these two columns have a similar adsorption capacity.

    However, the pressure drop across the fixed-bed is a crucial factor for determining the pump energy requirement of the whole adsorption system and hence affects the operating cost of a wastewater treatment plant using the adsorption column operation technique.The total pressure drop does not necessarily increase with increasing the tapered angles, the pressure drop is reduced in the tapered columns with adsorbent stratification. The Type 4 column exhibits a lower total pressure drop than the Types 2 and 3 columns. Therefore, combining the effects, adsorption efficiency and the associated pressure drop, the Type 4 column is the most appropriate choice for being used in adsorption column operation.

    1 Tsyganok, A.I., Yamanaka, I., Otsuka, K., “Dechlorination of chloroaromatics by electrocatalytic reduction over palladium-loaded carbon felt at room temperature”, Chemosphere, 39, 1819-1831(1999).

    2 Dabo, P., Cyr, A., Laplante, F., Jean, F., Menard, H., Lessard, J.,“Electrocatalytic dehydrochlorination of pentachlorophenol to phenol or cyclohexanol”, Environmental Science and Technology, 34,1265-1268 (2000).

    3 Pera-Titus, M., García-Molina, V., Ba?os, M. A., Giménez, J., Esplugas, S., “Degradation of chlorophenols by means of advanced oxidation processes: A general review”, Applied Catalysis B: Environmental, 47, 219-256 (2004).

    4 Verschueren, K., Handbook of Environmental Data on Organic Chemicals, Wiley, New York (2001).

    5 Huff, J., “Sawmill chemicals and carcinogenesis”, Environmental Health Perspectives, 109, 209-212 (2001).

    6 Lampi, P., Hakulinen, T., Luostarinen, T., Pukkala, E., Teppo, L.,“Cancer incidence following chlorophenol exposure in a community in southern Finland”, Archives of Environmental Health, 47,167-175 (1992).

    7 Hayward, K., “Drinking water contaminant hit-list for US EPA,”Water, 21, 4-9 (1999).

    8 “EC Decision 2455/2001/EC of the European Parliament and of the Council of November 20, 2001—establishing the list of priority substances in the field of water policy and amending Directive 2000/60/EC”,Official Journal of the European Communities, L 331, (2001).

    9 Przepiórski, J., “Enhanced adsorption of phenol from water by ammonia-treated activated carbon”, Journal of Hazardous Materials,135, 453-456 (2006).

    10 Inglezakis, V.J., Poulopoulos, S.G., Adsorption, Ion Exchange, and Catalysis: Design of Operations and Environmental Applications,Elsevier, Amsterdam (2006).

    11 Basmadjian, D., “The adsorption drying of gases and liquids”, In:Advances in Drying, Mujumdar, A.S., ed., Hemisphere Inc., Washington D.C. (1983).

    12 Mathews, A.P., “Effect of adsorbent particle layering on performance of conventional and tapered fixed-bed adsorbers”, Journal of Environmental Engineering, 131, 1488-1494 (2005).

    13 Pota, A.A., Mathews, A.P., “Adsorption dynamics in a stratified convergent tapered bed”, Chemical Engineering Science, 55,1399-1409 (2000).

    14 Langmuir, I., “The constitution and fundamental properties of solid and liquids-Part I. Solids”, Journal of the American Chemical Society, 40, 1361-1403 (1918).

    15 Freundlich, H., “Over the adsorption in solution”, Journal of Physical Chemistry, 57, 385-471 (1906).

    16 Redlich, O., Peterson, D. L., “A useful adsorption isotherm”, Journal of Physical Chemistry, 63, 1024-1026 (1959).

    17 Sips, R., “Combined form of Langmuir and Freundlich equations”,Journal of Chemical Physics, 16, 490-495 (1948).

    18 Bohart, G.S., Adams, E.Q., “Some aspects of the behavior of charcoal with respect to chlorine”, Journal of the American Chemical Society, 42, 523-544 (1920).

    19 Sze, M.F.F., Lee, V.K.C., McKay, G., “Simplified fixed bed column model for adsorption of organic pollutants using tapered activated carbon columns”, Desalination, 218, 323-333 (2008).

    20 McKay, G., Bino, M.J., “Fixed bed adsorption for the removal of pollutants from water”, Environmental Pollution, 66, 33-53 (1990).

    21 Hutchins, R.A., “Optimum sizing of activated carbon systems”, Industrial Water Engineering, 10, 40-43 (1973).

    22 Calgon Carbon Corporation, “Product bulletin of Filtrasorb 400 activated carbon”, Calgon Carbon Corporation, 2009 [2009-01-21], http://www.calgoncarbon.com/carbon_products/documents/Filtrasorb400.pdf

    23 Fogler, H.S., Elements of Chemical Reaction Engineering, Prentice Hall, New York (1999).

    24 Slejko, F.L., Adsorption Technology: A Step-by-Step Approach to Process Evaluation and Application, Marcel Dekker, New York(1985).

    25 Ergun, S., “Fluid flow through packed columns”, Chemical Engineering Progress, 48, 89-94 (1952).

    26 Lee, V.K.C., Porter, J.F., McKay, G., “Development of fixed-bed adsorber correlation models”, Industrial and Engineering Chemistry Research, 39, 2427-2433 (2000).

    27 Ko, D.C.K., Porter, J.F., McKay, G., “Correlation-based approach to the optimization of fixed-bed sorption units”, Industrial & Engineering Chemistry Research, 38, 4868-4877 (1999).

    2012-02-20, accepted 2012-04-05.

    * To whom correspondence should be addressed. E-mail: kemckayg@ust.hk

    啦啦啦视频在线资源免费观看| 交换朋友夫妻互换小说| 亚洲欧美成人精品一区二区| 伊人久久大香线蕉亚洲五| 99久国产av精品国产电影| 美女xxoo啪啪120秒动态图| 日韩大片免费观看网站| 亚洲人成电影观看| 中文字幕另类日韩欧美亚洲嫩草| 人人妻人人爽人人添夜夜欢视频| 亚洲国产毛片av蜜桃av| 欧美亚洲日本最大视频资源| 中文字幕精品免费在线观看视频| 人人澡人人妻人| 日韩中字成人| 汤姆久久久久久久影院中文字幕| 90打野战视频偷拍视频| 精品少妇黑人巨大在线播放| 人妻 亚洲 视频| 精品一品国产午夜福利视频| 国产亚洲精品第一综合不卡| 欧美成人午夜免费资源| 国产精品久久久久久精品古装| videossex国产| 精品第一国产精品| av网站在线播放免费| 国产国语露脸激情在线看| 亚洲欧美精品自产自拍| 国产精品二区激情视频| 亚洲欧美色中文字幕在线| 成人二区视频| 中文乱码字字幕精品一区二区三区| 综合色丁香网| 在线观看三级黄色| 亚洲精品aⅴ在线观看| 成年人免费黄色播放视频| 日韩电影二区| 午夜日韩欧美国产| 精品一区在线观看国产| 亚洲美女视频黄频| 交换朋友夫妻互换小说| 国产精品.久久久| 久久精品熟女亚洲av麻豆精品| 女的被弄到高潮叫床怎么办| 下体分泌物呈黄色| 一级毛片我不卡| 久久综合国产亚洲精品| 日韩三级伦理在线观看| 一区在线观看完整版| 久久人妻熟女aⅴ| 老汉色av国产亚洲站长工具| 一区福利在线观看| 99久久人妻综合| 欧美日韩精品网址| 午夜老司机福利剧场| 美女xxoo啪啪120秒动态图| 性少妇av在线| 亚洲av国产av综合av卡| 日本免费在线观看一区| 国产精品二区激情视频| 波多野结衣av一区二区av| 国产精品国产三级国产专区5o| 久久精品国产综合久久久| 久久午夜综合久久蜜桃| 欧美精品国产亚洲| 精品一区二区三区四区五区乱码 | 精品国产乱码久久久久久男人| 久久久久精品人妻al黑| 亚洲人成网站在线观看播放| 日韩制服丝袜自拍偷拍| 欧美亚洲日本最大视频资源| 777久久人妻少妇嫩草av网站| 久久午夜福利片| 国产成人av激情在线播放| 成人国语在线视频| 又大又黄又爽视频免费| av在线观看视频网站免费| 久久精品国产亚洲av高清一级| 亚洲经典国产精华液单| 久久av网站| 免费少妇av软件| 香蕉国产在线看| 天天躁夜夜躁狠狠久久av| 在线天堂最新版资源| 国产一区二区激情短视频 | h视频一区二区三区| 国产一区有黄有色的免费视频| 久久毛片免费看一区二区三区| 飞空精品影院首页| 一二三四中文在线观看免费高清| 可以免费在线观看a视频的电影网站 | 哪个播放器可以免费观看大片| 一级毛片黄色毛片免费观看视频| 波多野结衣av一区二区av| 免费黄色在线免费观看| 丰满少妇做爰视频| 中文字幕最新亚洲高清| 少妇人妻 视频| 成人毛片60女人毛片免费| 伦精品一区二区三区| 国产一区有黄有色的免费视频| 一区二区三区激情视频| 日韩免费高清中文字幕av| 黑人猛操日本美女一级片| 成人黄色视频免费在线看| 色网站视频免费| 欧美黄色片欧美黄色片| 一区二区日韩欧美中文字幕| 亚洲三级黄色毛片| 免费在线观看完整版高清| 欧美变态另类bdsm刘玥| 青春草视频在线免费观看| av在线老鸭窝| 一级爰片在线观看| 久久精品熟女亚洲av麻豆精品| 日韩一区二区视频免费看| 在线观看免费视频网站a站| 天天影视国产精品| 午夜免费观看性视频| 国产免费又黄又爽又色| 国产又爽黄色视频| 久久久久久免费高清国产稀缺| 韩国av在线不卡| 亚洲精品在线美女| 久久久久久久国产电影| 亚洲少妇的诱惑av| 亚洲三级黄色毛片| 亚洲精华国产精华液的使用体验| 亚洲视频免费观看视频| 中文字幕人妻丝袜一区二区 | 一级爰片在线观看| 久久精品aⅴ一区二区三区四区 | 成人亚洲欧美一区二区av| 欧美激情高清一区二区三区 | 九草在线视频观看| 午夜免费男女啪啪视频观看| 精品视频人人做人人爽| 欧美+日韩+精品| 叶爱在线成人免费视频播放| 精品人妻偷拍中文字幕| 少妇人妻 视频| 少妇人妻久久综合中文| 七月丁香在线播放| 日韩三级伦理在线观看| 大片电影免费在线观看免费| 午夜久久久在线观看| 男女国产视频网站| 久久久久久久久免费视频了| 最近中文字幕高清免费大全6| 免费观看无遮挡的男女| 亚洲欧美一区二区三区久久| 午夜91福利影院| 热99国产精品久久久久久7| 人妻少妇偷人精品九色| 在线免费观看不下载黄p国产| 国产乱来视频区| 超碰97精品在线观看| 中文字幕亚洲精品专区| av线在线观看网站| 丁香六月天网| 美女中出高潮动态图| 80岁老熟妇乱子伦牲交| 亚洲欧美成人精品一区二区| 捣出白浆h1v1| 国产高清不卡午夜福利| 国产免费福利视频在线观看| 91午夜精品亚洲一区二区三区| 在线观看免费日韩欧美大片| 美女主播在线视频| 亚洲国产av新网站| 成人国语在线视频| 国产极品天堂在线| 制服诱惑二区| 精品国产一区二区久久| 少妇人妻久久综合中文| 欧美精品国产亚洲| www.熟女人妻精品国产| 天美传媒精品一区二区| 久久国产亚洲av麻豆专区| 久久精品国产综合久久久| 国产1区2区3区精品| 色视频在线一区二区三区| 国产成人av激情在线播放| 青青草视频在线视频观看| 亚洲精品国产色婷婷电影| www.精华液| xxx大片免费视频| 日韩大片免费观看网站| 搡女人真爽免费视频火全软件| 26uuu在线亚洲综合色| av福利片在线| 亚洲综合色网址| av天堂久久9| 王馨瑶露胸无遮挡在线观看| 精品久久久精品久久久| 老司机亚洲免费影院| 麻豆乱淫一区二区| 18禁观看日本| 一区二区日韩欧美中文字幕| 黄色一级大片看看| 国产一区二区激情短视频 | 成人免费观看视频高清| 国产成人精品久久二区二区91 | 午夜免费男女啪啪视频观看| 国产精品.久久久| 精品人妻偷拍中文字幕| 女人精品久久久久毛片| av国产精品久久久久影院| 亚洲精品在线美女| 精品99又大又爽又粗少妇毛片| 美女中出高潮动态图| 美女高潮到喷水免费观看| 天天操日日干夜夜撸| 少妇被粗大猛烈的视频| 日韩av免费高清视频| 午夜福利视频精品| 久久精品夜色国产| 女人高潮潮喷娇喘18禁视频| 久久这里有精品视频免费| 性高湖久久久久久久久免费观看| 天天躁夜夜躁狠狠久久av| 国产成人91sexporn| 久久午夜综合久久蜜桃| 又黄又粗又硬又大视频| 晚上一个人看的免费电影| 天天躁狠狠躁夜夜躁狠狠躁| 国产一区二区激情短视频 | 国产毛片在线视频| 欧美黄色片欧美黄色片| 免费大片黄手机在线观看| 丝袜美腿诱惑在线| 欧美亚洲 丝袜 人妻 在线| 久久久久久伊人网av| 制服人妻中文乱码| 亚洲欧美一区二区三区久久| 少妇熟女欧美另类| 伊人久久国产一区二区| kizo精华| 肉色欧美久久久久久久蜜桃| 香蕉国产在线看| 777米奇影视久久| 亚洲色图综合在线观看| 国产精品久久久久久精品电影小说| 国产成人欧美| 国产精品香港三级国产av潘金莲 | 国产亚洲最大av| 99九九在线精品视频| 侵犯人妻中文字幕一二三四区| 国产深夜福利视频在线观看| 国产成人午夜福利电影在线观看| 99精国产麻豆久久婷婷| 这个男人来自地球电影免费观看 | 69精品国产乱码久久久| 国产激情久久老熟女| 丝袜美足系列| 97人妻天天添夜夜摸| a 毛片基地| 中文字幕亚洲精品专区| 成年女人在线观看亚洲视频| 国产一区二区激情短视频 | 亚洲av中文av极速乱| av免费在线看不卡| 精品少妇久久久久久888优播| 美女国产高潮福利片在线看| 狠狠精品人妻久久久久久综合| 国产淫语在线视频| 黄色一级大片看看| 母亲3免费完整高清在线观看 | 成人影院久久| av国产久精品久网站免费入址| 综合色丁香网| 咕卡用的链子| 黄网站色视频无遮挡免费观看| 丝袜喷水一区| 亚洲精品美女久久av网站| 国产免费福利视频在线观看| 91aial.com中文字幕在线观看| 大片电影免费在线观看免费| 亚洲国产最新在线播放| 亚洲欧美日韩另类电影网站| 18禁观看日本| 91精品三级在线观看| 精品人妻偷拍中文字幕| 一本—道久久a久久精品蜜桃钙片| 成人18禁高潮啪啪吃奶动态图| 9热在线视频观看99| 性色av一级| 极品少妇高潮喷水抽搐| 日韩欧美一区视频在线观看| 国产一区二区三区综合在线观看| 99精国产麻豆久久婷婷| 国产精品国产三级专区第一集| 搡女人真爽免费视频火全软件| 国产精品三级大全| 黄色毛片三级朝国网站| 免费日韩欧美在线观看| 亚洲av综合色区一区| 在线观看人妻少妇| 深夜精品福利| av.在线天堂| 日产精品乱码卡一卡2卡三| 久久久精品国产亚洲av高清涩受| 欧美精品国产亚洲| 日日爽夜夜爽网站| 亚洲欧美精品综合一区二区三区 | 日韩一区二区视频免费看| 免费观看av网站的网址| 亚洲伊人久久精品综合| 久久青草综合色| 国产精品蜜桃在线观看| 捣出白浆h1v1| 香蕉国产在线看| 嫩草影院入口| 国产乱人偷精品视频| 国产成人精品福利久久| 成人黄色视频免费在线看| 国产人伦9x9x在线观看 | 亚洲成人av在线免费| 国产国语露脸激情在线看| 亚洲,一卡二卡三卡| 亚洲成人一二三区av| 深夜精品福利| 日本av免费视频播放| 欧美日韩视频高清一区二区三区二| 韩国高清视频一区二区三区| 亚洲,欧美精品.| 国产精品成人在线| 久久久久人妻精品一区果冻| 国产精品99久久99久久久不卡 | 新久久久久国产一级毛片| 国产白丝娇喘喷水9色精品| 久久精品国产自在天天线| 高清不卡的av网站| 18禁动态无遮挡网站| www.av在线官网国产| 一区在线观看完整版| 中国国产av一级| 一区二区三区激情视频| 国产毛片在线视频| 制服诱惑二区| 一区二区三区四区激情视频| 国产深夜福利视频在线观看| 亚洲成色77777| 久久精品国产自在天天线| 99九九在线精品视频| 国产精品香港三级国产av潘金莲 | 一二三四在线观看免费中文在| 考比视频在线观看| 亚洲天堂av无毛| 欧美日韩国产mv在线观看视频| 久久久a久久爽久久v久久| 纵有疾风起免费观看全集完整版| www.精华液| 少妇人妻精品综合一区二区| 高清视频免费观看一区二区| 免费播放大片免费观看视频在线观看| 久久韩国三级中文字幕| 美女中出高潮动态图| av在线观看视频网站免费| 国产精品女同一区二区软件| 久久久精品区二区三区| 欧美+日韩+精品| 婷婷色综合大香蕉| av在线播放精品| 丰满饥渴人妻一区二区三| 亚洲在久久综合| 中文字幕人妻丝袜制服| 精品久久蜜臀av无| 国产精品熟女久久久久浪| 亚洲国产看品久久| 一级,二级,三级黄色视频| 中国国产av一级| 欧美亚洲日本最大视频资源| 一本一本久久a久久精品综合妖精 国产伦在线观看视频一区 | 日本色播在线视频| 免费观看无遮挡的男女| 久久精品国产a三级三级三级| 国产有黄有色有爽视频| 大片电影免费在线观看免费| 97人妻天天添夜夜摸| 两个人免费观看高清视频| 免费观看在线日韩| 国产精品免费大片| 国产日韩欧美视频二区| 久久精品国产亚洲av涩爱| 看非洲黑人一级黄片| 99久久综合免费| 99久久人妻综合| 在线看a的网站| 国产视频首页在线观看| 亚洲成人一二三区av| 波野结衣二区三区在线| 中国三级夫妇交换| 韩国av在线不卡| 18禁国产床啪视频网站| 制服诱惑二区| av在线播放精品| 十八禁高潮呻吟视频| 久久99一区二区三区| 激情五月婷婷亚洲| 女的被弄到高潮叫床怎么办| 美女脱内裤让男人舔精品视频| 高清av免费在线| 久久久精品区二区三区| 国产免费现黄频在线看| 国产精品人妻久久久影院| 久久精品夜色国产| 国产又色又爽无遮挡免| 视频区图区小说| 免费日韩欧美在线观看| 蜜桃在线观看..| 69精品国产乱码久久久| 天天躁日日躁夜夜躁夜夜| 国产精品香港三级国产av潘金莲 | a级毛片黄视频| 亚洲精品一二三| 日韩精品有码人妻一区| 在现免费观看毛片| 1024香蕉在线观看| 日韩中字成人| 在线 av 中文字幕| 欧美人与善性xxx| 日本vs欧美在线观看视频| 水蜜桃什么品种好| 老汉色av国产亚洲站长工具| 精品一区二区免费观看| 国产精品久久久久久精品电影小说| 欧美激情 高清一区二区三区| 免费观看a级毛片全部| 国产精品久久久久久av不卡| 老熟女久久久| 久久99一区二区三区| 黑人欧美特级aaaaaa片| 在线观看人妻少妇| 亚洲精品自拍成人| 日本爱情动作片www.在线观看| 日韩欧美一区视频在线观看| 欧美精品国产亚洲| 涩涩av久久男人的天堂| 亚洲欧美一区二区三区黑人 | 久久婷婷青草| 亚洲国产av新网站| 水蜜桃什么品种好| 99国产精品免费福利视频| 中国三级夫妇交换| 国产乱来视频区| 亚洲欧美一区二区三区黑人 | 一区二区日韩欧美中文字幕| 美女国产视频在线观看| 韩国高清视频一区二区三区| 性高湖久久久久久久久免费观看| 亚洲国产欧美在线一区| 亚洲精品在线美女| 国产成人精品久久久久久| 观看美女的网站| videos熟女内射| 超色免费av| 一区二区三区乱码不卡18| 人妻系列 视频| 久久久久国产网址| 国产成人精品婷婷| 狠狠精品人妻久久久久久综合| 黄频高清免费视频| 在线观看国产h片| 美女视频免费永久观看网站| 欧美日韩综合久久久久久| 多毛熟女@视频| 久久久久久人妻| 欧美精品人与动牲交sv欧美| 啦啦啦中文免费视频观看日本| 午夜影院在线不卡| 日本av免费视频播放| 国产片特级美女逼逼视频| 欧美激情极品国产一区二区三区| 日韩不卡一区二区三区视频在线| 水蜜桃什么品种好| 久久久久久久久久人人人人人人| 国产精品欧美亚洲77777| 丝瓜视频免费看黄片| 这个男人来自地球电影免费观看 | 一区二区三区四区激情视频| 日韩精品免费视频一区二区三区| 亚洲欧洲国产日韩| 国产精品免费视频内射| 亚洲第一区二区三区不卡| av国产精品久久久久影院| 精品一品国产午夜福利视频| 亚洲伊人久久精品综合| 久久久精品区二区三区| 永久免费av网站大全| 丝袜美足系列| 人妻一区二区av| 欧美日韩亚洲国产一区二区在线观看 | 欧美日韩精品成人综合77777| 在现免费观看毛片| 看十八女毛片水多多多| 亚洲国产精品一区三区| 天天影视国产精品| 99香蕉大伊视频| 国产一级毛片在线| 黄频高清免费视频| 久久综合国产亚洲精品| 老女人水多毛片| 久久精品亚洲av国产电影网| 2021少妇久久久久久久久久久| 深夜精品福利| 国产精品人妻久久久影院| 久久久精品区二区三区| 成人亚洲欧美一区二区av| 国产亚洲最大av| 精品亚洲乱码少妇综合久久| 最新的欧美精品一区二区| 日韩免费高清中文字幕av| 人人妻人人爽人人添夜夜欢视频| 最近最新中文字幕免费大全7| 精品国产超薄肉色丝袜足j| 制服丝袜香蕉在线| xxxhd国产人妻xxx| 日韩一区二区视频免费看| 久久这里只有精品19| 日韩中文字幕欧美一区二区 | 国产视频首页在线观看| √禁漫天堂资源中文www| 亚洲国产欧美日韩在线播放| 交换朋友夫妻互换小说| 亚洲成人手机| 欧美黄色片欧美黄色片| xxx大片免费视频| 久久久久久人妻| 黄色视频在线播放观看不卡| 在线天堂中文资源库| 日韩av免费高清视频| 精品亚洲乱码少妇综合久久| 中文欧美无线码| 男人爽女人下面视频在线观看| 考比视频在线观看| freevideosex欧美| 亚洲四区av| 考比视频在线观看| 免费人妻精品一区二区三区视频| av不卡在线播放| 成人免费观看视频高清| 青春草亚洲视频在线观看| 一级爰片在线观看| 免费播放大片免费观看视频在线观看| 一级黄片播放器| 在线看a的网站| 亚洲欧美一区二区三区久久| 一本一本久久a久久精品综合妖精 国产伦在线观看视频一区 | 色哟哟·www| 免费黄频网站在线观看国产| 少妇的丰满在线观看| 黑人巨大精品欧美一区二区蜜桃| 亚洲美女黄色视频免费看| 国产乱来视频区| 一级,二级,三级黄色视频| 久久久久网色| 狠狠婷婷综合久久久久久88av| 国产免费一区二区三区四区乱码| 国产在线视频一区二区| 国产综合精华液| 人人妻人人爽人人添夜夜欢视频| 国产人伦9x9x在线观看 | 久久久精品国产亚洲av高清涩受| 欧美亚洲日本最大视频资源| 亚洲美女黄色视频免费看| 亚洲精品第二区| 亚洲精品视频女| 免费黄色在线免费观看| 母亲3免费完整高清在线观看 | 自线自在国产av| 99香蕉大伊视频| 国产精品蜜桃在线观看| 成人黄色视频免费在线看| 超碰97精品在线观看| 免费高清在线观看视频在线观看| 国产 精品1| 寂寞人妻少妇视频99o| 久久国内精品自在自线图片| 在线天堂最新版资源| 欧美日韩国产mv在线观看视频| 90打野战视频偷拍视频| 日本爱情动作片www.在线观看| 欧美老熟妇乱子伦牲交| 成人影院久久| 日韩欧美一区视频在线观看| 色吧在线观看| 在线观看一区二区三区激情| 日日撸夜夜添| av线在线观看网站| 桃花免费在线播放| 极品少妇高潮喷水抽搐| 成人黄色视频免费在线看| 超碰97精品在线观看| 久久99蜜桃精品久久| 黄网站色视频无遮挡免费观看| a级毛片在线看网站| 黄色视频在线播放观看不卡| 男女下面插进去视频免费观看| 99久国产av精品国产电影| 免费观看av网站的网址| 亚洲婷婷狠狠爱综合网| 亚洲第一青青草原| av天堂久久9| 一本一本久久a久久精品综合妖精 国产伦在线观看视频一区 | 久久影院123| 免费在线观看完整版高清| 亚洲av电影在线观看一区二区三区| kizo精华| 久久99热这里只频精品6学生| 国产一区二区激情短视频 | 国产成人a∨麻豆精品| 日本-黄色视频高清免费观看| 一区二区三区乱码不卡18| 不卡视频在线观看欧美|