• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Tunable and efficient microwave absorption from mesophase pitch carbide with designable electromagnetic properties

    2023-11-11 04:07:38JunyuLuHoruoZhngYngChenMushnYunMeiLingZhenggungHengHuweiZou
    Defence Technology 2023年10期

    Junyu Lu , Horuo Zhng , Yng Chen , Mushn Yun , Mei Ling ,Zhenggung Heng ,*, Huwei Zou ,**

    a The State Key Lab of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China

    b School of New Energy and Materials Engineering, Southwest Petroleum University, Chengdu 610500, China

    Keywords:Microwave absorption Mesophase pitch Broadband Dielectric loss Interfacial polarization

    ABSTRACT In order to obtain the microwave absorption (MA) materials with light weight, high efficiency and tunable properties, the carbonized mesophase pitch (CMP) with the variation in carbonization temperatures and particle sizes were prepared and characterized.The carbonization temperature mainly controlled the graphitization degree of the CMP to affect their conductive loss.The carbon residues were generated on the CMP surface when the temperature was higher than 700 °C, which contributed significantly to the polarization loss of the CMP.For scale regulation, the segregation between the particles in the paraffin ring caused by the reduction particles of CMP carbonization at 750 °C (750 CMP)resulted in a significant reduction in conductive losses while improving their impedance matching.The 750 CMP over 300 mesh sieved had the strongest MA properties of -53 dB at 3.49 GHz within 5.5 mm.Moreover, the prepared CMPs were multi-layer compounded and optimized by CST microwave studio.The synergistic effect derived from the improved impedance matching and the enhanced interfacial polarization resulted in significant reflection loss in multi-layer CMP.Overall, these findings lead to the systematically regulation of carbon-based materials for MA, showing an attractive application prospect for the preparation of high-performance MA materials.

    1.Introduction

    To effectively combat the threat of multi-band and ultra-wide band radar reconnaissance, the high-performance broadband lightweight microwave absorption (MA) materials have become a frontier technology for national defense security because of their ability to convert the energy of incident electromagnetic wave into heat loss [1-4].The frequency of military radar is generally concentrated in 2 GHz-18 GHz,such as S-band(2 GHz-4 GHz)for medium-range early warning radar, and X-band (8 GHz-12 GHz)for airborne radar, highlighting the importance of absorbing materials with adjustable and broadband electronic magnetic wave(EMW) absorption performance [2,3,5].Therefore, the effective integration of light weight, high efficiency and tunable bandwidth into MA materials remains a great challenge,depending on creative designs such as multilayer designs, material composites and/or metamaterials [1,5-9].

    Traditional magnetic wave-absorbing materials such as ferrites[2,10,11], metallic magnets or their hybrids [12-16] were broadly investigated because of their performance of magnetic loss.However, they have high density, limited magnetic loss properties in high frequency range, which may be not meet the requirements and make them need to compound with dielectric loss materials[14,17,18].Although conductive polymers such as poly (3,4-ethylenedioxythiophene) (PEDOT) [19,20], polyaniline (PANI)[19,21] and polypyrrole [22] have flexible adjustability, they also suffered from poor chemical stability and low heat resistance.In contrast, carbon-based materials, due to their high dielectric loss,light weight and great performance stability, have become a key research direction in the field of EMW absorption fields and been applied in a variety of aerospace devices and scenarios [23-25].

    On this basis,a variety of carbon materials such as carbon black[18,25],carbon nanotubes (CNTs) [26,27], graphene [28,29] and so on have been successfully prepared and used in the field of MA[30].However, the CNTs and graphene need to be compound with low dielectric materials or loaded in three-dimensional structures,due to the impedance mismatch caused by their high electrical conductivity [4,5,26].Rather than EMW absorption, CNTs [31] and graphene [11,32,33] are commonly used in the field of electromagnetic shielding in this situation.In comparison, carbon black does not require any additional structural design and can realize the well MA effect using their adjustable electromagnetic parameters via the method of one-step carbonization of natural biomass materials, demonstrating the advantages of low cost and simple preparation process [6,23,34,35].For instance, Qiu et al.prepared porous carbon from a walnut shell using potassium hydroxide(KOH) activation and carbonization, with the minimum reflective loss(RLmin)of-42.4 dB at 8.88 GHz[36].Similarly,by using in situ growth method with nickel nitrate and cotton waste as precursors,magnetic porous carbon composites can be obtained and has the RLminof -40.5 dB at 15.8 GHz [37].Therefore, finding natural carbon precursors with a high residual carbon rate, low cost, and controllable parameters is critical for large-scale MA carbon black production.

    Mesophase pitch (MP) is a nematic liquid crystal with liquid crystal-like physical properties such as optical anisotropy and low viscosity[38,39].The MP has a very high coke yield(beyond 80 wt%), while the product is pure and can be used to prepare highquality carbon black, which is rarely available in other natural materials [39-41].In industry, the MP has good process stability and processability,and thus have the potential to be used on a large scale.It is generally recognized that effective frequency regulation is important but challenging for the practical applications of MA materials[42].In view of the excellent carbon formation properties of MP,it is possible to obtain tunable MA materials in scale through system temperature regulation.The MA materials with different particle sizes (especially in nano scale) may have different polarization characteristics and absorption properties [43,44].However,rarely studies are focused on the effects of particle size on the microwave characteristics of materials in the range of gigahertz frequency.On the other hand,it is necessary to explore simple and easily available methods to obtain efficient EMW absorbers due to the complex structures and costly preparation of MOFs or aerogel.

    To meet the above challenges, the carbonized mesophase pitch(CMP) with the variation in carbonization temperatures and particle sizes were prepared and characterized.After that,the gradient multilayer CMPs were designed through CST software simulation to achieve the broadband absorption requirement in specific frequency bands.The mechanisms for the enhanced MA were clarified in terms of synergistic effects derived from multiple reflection and increased impedance matching.

    2.Material and methods

    2.1.Materials

    MP with a softening point of 290°C and mesophase content of the pitch of 100% were obtained from Mitsubishi Gas Chemical Company (Nagasaki, Japan).Solid paraffin was obtained from Aladdin,China.All of the reagents were of analytical grade and used without further purification.Deionized water was used for the characterization of experiments.

    2.2.Preparation of CMP with different particle size

    As shown in Fig.1, CMPs were obtained by carbonizing MP at 600°C-800°C for 1 h in a tubular furnace at a heating rate of 5°C/min under Ar atmosphere.After sieving using a 2-300 mesh sieve,the CMPs were named as 600 CMP, 650 CMP, 700 CMP, 750 CMP and 800 CMP according to the carbonization temperature.Apart from the 2-300 mesh sieve (medium powder), these CMPs were also sieved using 1-200 mesh and>300 mesh sieves to obtain the coarse and fine powders.The particle size of 100-200 mesh sieve,200-300 mesh sieve,and>300 mesh sieve was 75 μm-165 μm,50 μm-75 μm and<50 μm,respectively,according to the mesh size of the screen.Meanwhile, superfine powders (nano scale) were also prepared by ball milling, the speed and time were 500 r/min and 2 h respectively.

    2.3.Characterization

    The appropriate carbonization temperature of the samples was tested by thermogravimetric analyzer (TG 209 F1, NETZSCH, Germany)under nitrogen from 30°C to 800°C at a heating rate of 5°C/min.The structural and surface morphology information of the samples was examined by a field emission scanning electron microscope (Quanta 250, FEI Co.Ltd., USA).X-ray powder diffraction(XRD) patterns were measured to investigate the crystal structure and crystallinity of the samples, using X-ray diffractometer (DY-1291, Philips, Dutch) with Cu Kαline.Raman spectra were performed using a Raman spectrometer(Raman,Dilor,France)ranging from 500 cm-1to 3000 cm-1with Ar ion laser(λ=532 nm).X-ray photoelectron spectra (XPS, Escalab 250Xi type, Thermo Fisher)were measured to investigate the phase combination and valence of the CMP.Polarizing microscope (POM) using UPT200i was also used to investigate the distribution of CMP in paraffin ring.The relative complex permittivity and permeability were obtained by the Agilent N5230 vector network analyzer in the frequency range of 2 GHz-18 GHz using the coaxial-line method, where the CMP were mixed with 50 wt%paraffin and pressed through a mold to be a ring-shaped sample with the outer and inner diameters of 7 mm and 3.04 mm, respectively.Then, in terms of the transmission line theory and Debye relaxation theory, microwave absorbing performance and Cole-Cole semicircle of tested samples can be analyzed.

    2.4.CST simulation settings

    The gradient CMP design were simulated and optimized using the commercial software CST Microwave Studio (CST 2019, Germany) to achieve efficient absorption at 2 GHz-8 GHz, 8 GHz-12 GHz, and 12 GHz-18 GHz, respectively [45].The electromagnetic parameters of CMP were introduced in to CST.The simulation parameter was set to a unit-cell (4 × 4 mm2) model of the fabricated structure and a frequency domain solver, with Et(electrical field) and Ht (magnetic field) values of 0.During the simulation,the PEC backplane was added to the bottom of the layer structure.The gradient was simply set as a two-layer structure to qualitatively analyze the effect of multi-layer compounding, with medium power of 700 CMP(700 M)as the upper layer and medium power of 750 CMP (750 M) as the bottom layer, considering the impedance matching characteristics.The thickness of each layer was set to 0 mm-3 mm during this parametric study.The optimal amount of absorption performance in a specific frequency band was obtained using the interlayer thickness as a variable and the minimum absorption performance(in a specific frequency band)as the optimization target.

    Fig.1.Schematic diagram of the fabrication process of CMP with different particle size.

    3.Results and discussion

    3.1.Selection of carbonization temperature range

    3.1.1.TGA

    TGA was used to calculate the mass loss ratio and the proper carbonization temperature for MP.As shown in Fig.2(a), the first weight loss peak near 60°C corresponded to water evaporation[5].The majority of weight loss (e.g., hydrocarbon volatilization)occurred at temperatures below 605°C,with the maximum weight loss rate occurring at 510°C.The dramatic weight loss in the 300°C-600°C softening range was attributed to the release of gaseous MP species.Various reactions occurred during the volatilization processes,including polycondensation,polymerization,cracking of side chains from aromatic rings,and isomerization[46].The weight remained nearly constant after heating to 605°C, indicating that the majority of volatile components had been released.This region was linked to semi-coke aromatization and the onset of coking,both of which contributed to the formation of conductive networks[47].The single factor assessment of the carbonization temperature was set from 600°C to 800°C based on the TGA results.

    Fig.2.(a) TG and DTG images; (b) XRD; (c) Raman patterns; (d) XPS survey spectrum and (e) SEM images of CMP.

    3.2.Effect of carbonization temperature on CMPs

    3.2.1.Morphology and structure

    The crystallinity, bonding state and microstructure of the samples were characterized by XRD,Raman,XPS and SEM,respectively,to investigate the effect of carbonization temperature on the chemical structure and morphology of MP.

    As shown in Fig.2(b),only one peak(002)corresponding to the graphitic structure was observed at around 2θ=25°in all samples,indicating the d-spacing of 0.84 nm and hydrocarbons as the main component of MP [23,39,48].More importantly, as the carbonization temperature was increased, the 002 peak shifted to higher 2θ values due to the volatilization of aromatic and oxidizing components in MP, indicating that the carbonization degree of MP was increased.Similar effects were seen in Co/C composites when the annealing temperature was raised [44] and in Carbon/Carbon composites when the carbonization temperature was increased[39].The bonding state of carbon atoms has a great influence on microwave absorption performance41.As shown in Fig.2(c), all powders had similar spectra with two discernible peaks located in D-bands (nearly 1360 cm-1) and G-bands (nearly 1600 cm-1),representing the vibration of disordered graphite carbon atoms and the stretching vibration mode of sp2hybridized carbon atoms,respectively[49-51].Generally,the ratio of ID/IGcan be utilized to represent the disorder degree of carbon[49].The R ratios(ID/IG)of CMPs carbonized from 600 to 800°C were 0.69,0.69,0.74,0.81 and 0.88, respectively, indicating that all of the CMPs had similar lowdegree graphitization.Furthermore, the ID/IGratio gradually increased with the increase of carbonization temperature, which could be due to an increase in sp2domains during carbonization[52].Other research has found that increasing the annealing temperature increases the degree of disorder in metal-organic framework-derived Co/C composites [44].However, Yang et al.observed the different results that the ID/IGratios of hierarchical hollow C@MnO2composites decreased from 1.13 to 1.01 with the increase of annealing temperature from 650 to 1250°C [49].This difference may be attributed to the C@MnO2as three-dimensional disordered carbon network structure consisting of various hybrid forms of carbon atoms(sp/sp2/sp3),while MP is simply an ordered lamellar structure.The chemical states of CMP were characterized by XPS.Fig.2(d)was the wide scanning results of CMP,confirming the existence of C,N and O elements.The samples still maintained a similar spectrum after heating, while the proportion of C/O increased from 14.57 to 15.64, indicating the removal of the oxygen-containing group.

    SEM images of the surface of samples are presented in Fig.2(e).All the samples had similar structural morphology.The deposition of small carbon residues (shown in red arrow) on the CMP increased significantly with the increase of carbonization temperature.These carbon residues could be related to the volatilization of aromatic and oxidizing components in MP and thus resulting in the leaves of residual carbon [47].Hollow flaws or surface defects on the 750 and 800 CMP may contribute to an increase in dielectric loss and achieve superior impedance matching with the surrounding CMP matrix when compared to 600 CMP and 650 CMP [41].Furthermore, the carbon residues on the CMP could act as active interfaces,potentially lengthening microwave propagation distances for multiple reflection propagation paths under the CMP[5,41].

    3.2.2.Electromagnetic characteristics and mechanisms

    The real parts ε′and μ′represented the storage capability of electric and magnetic energies,while the imaginary parts ε′′and μ′′represented the ability of electric and magnetic energies to be dissipated[30].Both the dielectric loss tangent(tanδε = ε′′/ε′)and the magnetic loss tangent (tanδμ = μ′′/μ′) were important indicators to evaluate the dielectric loss capacity of MA materials.The difference in complex permittivity in carbon materials is usually attributed to their carbon atom bonding state (the degree of graphitization) and microstructure.As illustrated in Fig.3(a),Fig.3(b),the effect of carbonization temperature on the MP can be summarized as higher temperatures resulting in higher ε′and ε′′.These findings were also consistent with a previous study that higher annealing temperatures resulted in higher εr(plural forms of ε′and ε′′)of Co/C composites[44].More importantly,the ε′and ε′′of 600 CMP and 650 CMP in the 2 GHz-18 GHz region approximated to 3 and 0 respectively, indicating that MP dielectric loss is negligible at lower carbonization temperatures.As a result of the dielectric loss of MP resulting from their improvement, the carbonization temperature should be higher than 700°C.Meanwhile, the 800 CMP exhibited the highest dielectric properties (ε′,ε′′and tanε)compared to the other CMPs,which could be attributed to the higher number of conductive carbons in 800 CMP[44].It was worth noting that the ε'' values of 750 and 800 CMP seem to have distinct fluctuating phases corresponding to linear decreases and multiple peaks, which were characteristic of the free-electron model and polarization relaxation [49].The gradual increase in permittivity with increasing carbonization temperature was consistent with the effective medium theory,which indicated that small molecule volatilization promoted the accumulation of carbon residue [18].A moderate tanδε value has a better effect on microwave absorption due to impedance matching [5].As shown in Fig.3(c), the tanδε of CMPs carbonized at 700°C-800°C showed similar moderate values between 0.2 and 0.5 in the range of 2 GHz-18 GHz,while 600 CMP and 650 CMP have no loss capability.This is mainly due to the small molecular heterocycles inside the MP were volatilized during volatilization processes including polycondensation, polymerization, cracking of side chains from aromatic rings and thus improving the conductivity of CMP[44,46].Generally,ε''represents the sum of polarization relaxation(ε′′p)and conductive loss(ε′′c)[49].Apart from dielectric loss,surface defects observed in the SEM images of 750 CMP and 800 CMP (Fig.2(e))could act as polarization centers to consume dielectric energy though dipole orientation, thus the tanδε decreased [30].As illustrated in Fig.3(d)-Fig.3(f), the magnetic loss capacity of CMP is almost negligible.CMP has a much lower μ′′than the ε′′,implying that the excellent reflection loss performance should be primarily due to dielectric loss.

    According to Debye relaxation theory, the curve of Cole-Cole was used to describe the relaxation process, in which each semicircle represents one Debye relaxation process.On this basis, the relation of ε′and ε′′can be expressed as Ref.[29].

    The more semicircles and the larger radius,the greater degree of multi-polarization [16].Since the 600 CMP and 650 CMP have no dielectric properties,the Cole-Cole curves were observed for CMPs carbonized at 700°C-800°C, as shown in Fig.3(g)-Fig.3(i).Compared to one curve for 700 CMP,two or more semicircles can be observed for 750 CMP and 800 CMP, suggesting that interfacial polarization effects, defects or chemical bonding have play an important role in their dielectric losses [16,53].The interface polarization caused by the surface defect of CMP with higher carbonization temperature is one of the main causes of Debye dipolar relaxation [55].This surface defect acted like a center of polarization, causing the accumulation of charges at the interfaces and production of electric dipole, further resulted in interfacial relaxation [2,55].Moreover, the long straight tails of the curves observed in 750 CMP and 800 CMP compared to 700 CMP may be related to the better conduction loss capability and also reflected their better conductivity [16,29].

    Fig.3.Frequency dependence of (a) real part ε′, (b) imaginary part ε′′, (c) dielectric loss tangent tanδε, (d) real part μ′, (e) imaginary part μ′′, (f) dielectric loss tangent tanδμ, and Cole-Cole semicircle of (g) 700 CMP, (h) 750 CMP and (i) 800 CMP in medium powder.

    Impedance matching is an important point in determining the EMW absorbing properties of CMP,which can be fully indicated by the intrinsic impedance [2].

    As shown in Fig.4(a), the 600 CMP represented the best impedance matching among the CMPs at different carbonization temperature,with the impedance matching degree greater than 0.6 in 2 GHz-18 GHz.It was clearly observed that with the increase of carbonization temperature, the impedance matching of CMP decreased gradually,mainly due to the overlarge ε′and ε′′[54].The volatilization of aromatic and oxidizing components increased the overall carrier mobility (including surface or interior) in MP,resulting in the formation of conductive network [49].This result demonstrates that except for the strong capacity of dielectric loss,controlling the carbonization temperature to achieve the appropriate impedance matching is another important approach for achieving superior microwave absorption property, which was further verified through the comparation of the microwave absorption performance between 800 CMP and 700 CMP.Based on the transmission line theory,α can be described as Ref.[54].

    As seen in Fig.4(b),both 600 CMP and 650 CMP have near-zero attenuation,which corresponds to their low dielectric constant real and imaginary parts.The α of CMPs tends to increase as the temperature warms up.It is worth noting that the increase in the α inevitably leads to a decrease in Zreal,implying that the absorption performance of CMP does not increase linearly with increasing carbonization temperature.The carbonization temperature must be within an appropriate range in order for the attenuation coefficient and impedance matching to be perfectly balanced.

    Fig.4.(a) Impedance matching ratio Zreal and (b) attenuation constant α.

    3.2.3.EMW absorption properties

    The transmission line theory was used to investigate the RL values of 600-800 CMPs in order to characterize the effect of carbonization temperature on the reflection-loss properties of the CMP powders.The following equations can be used to calculate RL values using transmission line theory [30].

    where Zinis the input impedance of absorber, Z0is the free space impedance, εris the relative complex permittivity, μris relative complex permeability, f is the EMW frequency, c is the free space light velocity, and d is the thickness of absorber.

    The CMPs were mixed with 50 wt%paraffin,and the calculated 2D and 3D RL values of the absorbers with thicknesses ranging from 1 mm to 5.5 mm were shown in Fig.5(a)-Fig.5(e).Generally, less than -10 dB of the reflection loss (RL) was recognized as the threshold of effective absorption [30].The 600 CMP and 650 CMP powders exhibited quite weak microwave absorption capability with|RL|values less than 10 dB at all thicknesses.The carbonization of more than 700°C makes CMP have better absorption performance in different frequency bands.As the carbonization temperature increased,an obvious improvement of microwave absorption was observed,with the RLminvalue of 750 CMP lower than-53 dB at 3.49 GHz in the thickness of 5.5 mm.The effective absorption bandwidth (EAB, RL < -10 dB) of 700 CMP reached 5.0 GHz (11.6 GHz-16.6 GHz),corresponding to a matching thickness of 2.5 mm.The EAB of 750 CMP reached 3.4 GHz (12.6 GHz-16.0 GHz) when matching thickness was 1.5 mm,confirming the better attenuation coefficient in comparison with 700 CMP.Compared with 750 CMP,800 CMP had a relatively weak microwave absorption performance.At a matched thickness of 2.5 mm,the EAB of the 800 CMP reached only 2.3 GHz (6.9 GHz-9.2 GHz).This is mainly due to the impedance mismatch originating from the high dielectric loss and low magnetic loss, which will further lead to higher microwave reflection rather than absorption [5].Li et al.obtained similar results for organic-inorganic hybrid aerogels in which the amount of CNT has been varied from 3.40 wt% to 4.08 wt%, resulting in a weakened microwave absorption property [30].Furthermore, all CMPs demonstrated that the absorption peaks shifted towards lower frequencies as thickness increased, which was consistent with the 1/4 quarter-wavelength theory [2].Apart from the electrical conductivity, adjusting the thickness of absorbing materials also played a promising role in optimizing the reflection loss performance of CMP.These results demonstrated that CMP can be transformed from a wave-transmitting material to a highperformance wave-absorbing material by regulating the appropriate carbonization temperature.

    3.3.Effect of particle size on CMPs

    In this section, the particle size regulation was performed by tuning the size of mesh sieve or ball-milling treatment after the carbonization process which enabled variations in the microstructure.Considering that 750 CMP has the strongest MA performance, the effect of particle size on absorbing performance and electromagnetic parameters of 750 CMP was continued to be tested and characterized.

    3.3.1.Morphology and structure

    Fig.6 presented the SEM images of 750 CMP powder with different sizes (coarse powder, medium powder, fine powder and superfine powder).The particle size of 750 CMPs decreased with mesh sieving elevation and reached the smallest particle size after 2.5 h of ball-milling.The CMP powders have distinct sharp edges and a large number of small carbon residues deposited on their surface, as seen by SEM at 1000 times magnification.This was mainly ascribed to the thermal decomposition reaction and light aromatic compound escape occurred during the carbonization of MP47.More importantly, the aspect ratio of the CMP powders appeared to increase as the mesh sieving was increased from 100 to 200 to 300+.Powders with a higher aspect ratio may exhibit more interface polarization and shape anisotropy43.Such observation indicated that four kinds of CMP with varying particle size and aspect ratio appeared to have distinct electromagnetic loss mechanisms, which could significantly affect the EMW absorption [3].

    Fig.5.2D and 3D reflection loss of (a) 600 CMP, (b) 650 CMP, (c) 700 CMP (d) 750 CMP and (e) 800 CMP in medium powder.

    Fig.6.SEM and POM (with 50% paraffin) images of 750 CMP in (a) coarse powder, (b) medium powder, (c) fine powder and (d) superfine powder.

    The POM of the CMPs was determined after they were blended with paraffin wax to form wave-absorbing rings.As shown in Fig.6,the green particles were optically anisotropic CMPs,while the black parts were paraffin wax.After sieving or ball milling, the CMP particles in the paraffin wax became thinner and more uniformly distributed.The coarse powder displayed a continuous optical morphology and a well connection between each particle in paraffin.As the particle size of the CMP powders decreased, the connections between them were isolated by paraffin wax,resulting in a uniform distribution of discontinuous optical morphology.It could be imagined that the connection between coarse powder was like a bridge of CMP skeleton, while the fine particle was like crushed skeleton dispersed evenly in a larger space,which may not be conducive to the fine powder connections and partly hinder the formation of conductive networks.More particles at heterogeneous interfaces may imply an increase in multiple scattering effects.

    3.3.2.Electromagnetic characteristics and mechanisms

    The calculated 2D and 3D reflection loss of 750 CMP with different particle sizes were shown in Fig.7.As shown in Fig.7(a)-Fig.7(c), the influence of particle size can be summarized as follows: the finer the particles (micrometer to nanoscale), the lower the ε′and ε′′.Similar results were also reported by Kumar et al.,the ε′and ε′′of SiC decreased with extending ball milling time from 10 h to 20 h[56].On the contrary,Cai et al.reported that the lower particle size (86.97 μm-31.80 μm) on the microwave absorption properties of FeSiAl magnetically soft alloy hollow microspheres(MSAHMs) leaded the higher ε′and ε′′, attributing to the larger specific surface area and more free electrons at smaller particle size[3].This difference could be due to that the control range of MSAHMs was limited to micrometer-scale,while the control range of our experiment was characterized from micrometer to nanoscale.Consequently, a similar trend could be found in the CMP for particles ranging from medium (75 μm-165 μm) to fine (50 μm-75 μm), with ε′and ε′′showing a slight increase in 2 GHz-18 GHz.The tanδε of 750 CMP with different particle sizes showed similar moderate values in the range of 2 GHz-18 GHz,as shown in Fig.7(c), with superfine powder having the lowest dielectric loss capability.As shown in the Supplemental Fig.S1,the real (μ′) and imaginary (μ'') permeabilities of 750 CMPs with different particle size were approach to 1 and 0,respectively,with the tangent of magnetic loss (tanδμ) was nearly 0.Therefore, the attenuation loss of CMP mainly comes from dielectric loss.

    Compared with other particles, the tanδε of fine powders showed a higher peak in the range of 6 GHz-9 GHz,and showed a fluctuating trend with the increase of frequency.This could be attributed to the fact that fine powder has the most diverse particle size distribution as seen in SEM (Fig.6(c)).The contact area between fine powders was significantly different, which may induce the generation of interfacial polarization[10].The Cole-Cole curves shown in Fig.7(d)-Fig.7(g) further confirmed the generation of multiple polarization of the powder with smaller particle size.As seen in Fig.7(f),the fine powder has the most fluctuating relaxation peak.This can be attributed to the larger particle size distribution(<50 μm), which may generate more polarization sites during EM wave transmission.Such observation confirmed that the dielectric loss was mainly attributed to the interfacial polarization in fine powders of CMP [29,44].Kumar et al.also reported that charge polarization became more dominant with the increase in surface area space, resulting in an increase of complex permittivity [56].Moreover, a long tail of the curves for all powder can be clearly observed,which is related to the conduction loss[29].The interface polarization caused by the links between particles of different sizes may be the primary cause of Debye dipole relaxation.Similarly,the polarization process of Co/C composites with larger particle sizes(S1-700)was significantly lower than that of Co/C composites with smaller particle sizes(S2-700)at the same pyrolysis temperature44.The effect of particle size on MA performance at the same filling ratio was primarily due to conductive loss, and it was also consistent with the interfacial polarization theory [10,44].

    Fig.7.Frequency dependence of (a) real part ε′, (b) imaginary part ε′′, (c) dielectric loss tangent tanδε, Cole-Cole semicircles of (d) coarse powder, (e) medium powder, (f) fine powder, (g) superfine powder, (h) impedance matching ratio of Zreal and (i) attenuation constant α.

    As shown in Fig.7(h),the superfine powder represents the best in terms of impedance matching among these 750 CMP particles,with the intrinsic impedance matching degree greater than 0.3 over 2 GHz-18 GHz With the decrease of particle size, the impedance matching of CMP increased gradually mainly due to the decrease of ε′and ε′′[54].The POM (Fig.6) confirmed that as particle size decreased, the interparticle connections were isolated by paraffin wax, resulting in a uniformly distributed discontinuous optical morphology.These results showed that for the same absorbing material, controlling the particle size to achieve appropriate impedance matching was another important way to obtain superior microwave absorption performance.

    As seen in Fig.7(i),both 600 CMP and 650 CMP have near-zero attenuation,which corresponds to their low dielectric constant real and imaginary parts.The α of CMPs tends to increase as the temperature warms up.The high frequency absorbing performance of carbon materials at GHz is mainly attributed to the resistive loss caused by the reciprocal motion and migration of relaxed electrons,which generally leads to faster electron relaxation loss [5,54].It is worth noting that the increase in the α inevitably leads to a decrease in Zreal,implying that the absorption performance of CMP does not increase linearly with increasing carbonization temperature.

    3.3.3.EMW absorption properties

    As shown in Fig.8, all of the particles demonstrated good microwave absorption properties in the specific frequency band, and showed a trend of fluctuation with the change of particle size.It was discovered that as the thickness of the samples increased,the absorption peak shifted to a lower frequency.This could be due to the thickness of samples is equal to the odd times of 1/4 wavelength, resulting in destructive interference between the samples and electromagnetic wave [30].Among all the samples, the fine powder had the strongest absorption peak at the thickness of 5.5 mm with the minimum RL of -53 dB at 3.49 GHz, demonstrating a superior absorbability in S bands (2 GHz-4 GHz).It is noteworthy that the effective absorption peaks showed a trend toward higher wave frequencies as the sample particles become finer.For example, the effective absorption of superfine powder with different thickness was mainly concentrated at 12 GHz-18 GHz,while both course powder and medium powder were mainly concentrated at 2 GHz-14 GHz, indicating the lower complex permittivity requires higher frequency to achieve better loss effects.The decrease in complex dielectric constant was mainly due to the paraffin wax isolating the connection between the ultrafine powders,which prevents the formation of a continuous conducting network as shown in Fig.6 (POM)[43].In summary,the thickness and particle size of absorbing material also play an important role in optimizing the reflection loss performance of CMP.

    Fig.8.2D and 3D reflection loss of 750 CMP in (a) coarse powder, (b) medium powder, (c) fine powder and (d) superfine powder.

    3.3.4.EMW attenuation mechanism

    Based on the above experiments and analysis, the MA mechanism of the paraffin ring loaded with CMPs were revealed and shown in Fig.9.

    (i) At mesoscopic-scale, multiple scattering (Fig.9(a)) between CMP particles was encouraged by the uniform distribution of CMP in paraffin.EMW was easily reflected multiple times between CMP particles, as shown in Fig.6, due to the disorder of CMP particles,promoting the effective improvement of MA performance.Furthermore, Fig.6(c) illustrated that the fine powder of 750 CMP has varying pore sizes with a higher shape anisotropy, which could cause more multiple reflection and absorption processes of EMW, increasing the MA intensity.

    (ii) As shown in Figs.2(d)and Fig.6,there are a lot of disordered carbon residues on the surface of CMP, and the adhesion between the low-scale carbon residues and the larger CMP particles could cause polarization in the interfacial region(Maxwell-Wagner effect)[30].To sum up,CMP with varying particle sizes realized tunable and high-intensity MA via the above mesoscopic-scale MA mechanism.

    3.4.Multilayer design of CMPs

    Based on the obtained results, CMPs can gradually transition from low to high complex permittivity.Through simulation and optimization, it is possible to achieve effective broadband absorption in different absorption frequency bands[35].

    3.4.1.CST optimization

    Fig.10.Optimized reflection loss of double-layer structure for different specific frequency bands (a) and the illustration of the muti-layer structure (b).

    Table 1EMW absorption properties of different materials in the frequency range of 2-18 GHz.

    As shown in Fig.10(a),the parametric simulations revealed that the designed and optimized multilayer absorbing structure exhibited excellent absorption performance.The optimized thicknesses of 700 M and 750 M for the S-C band ranges were both 3 mm, with the RL less than -10 dB in the 3.56 GHz-4.85 GHz range.The optimized thicknesses of 700 M and 750 M for the X band were 2 mm and 1.08 mm, respectively, which demonstrated excellent RL(-10 dB)at 8.09 GHz-11.90 GHz,covering nearly 95%of the X band.The optimized thicknesses for the Ku band were 1.589 mm and 0.689 mm, respectively, with the effective RL covering 98.3% (12.0 GHz-17.9 GHz).It is demonstrated that the CMP gradient material has a tunable and efficient wave absorption performance by optimizing the double-layer gradient thickness.The CMP with double-layer structure has significantly improved the broadband absorption effect compared to the single-layer 700 M or 750 M (Fig.5(c) and Fig.5(d)).

    These remarkable results, as shown in Fig.10(b), could be attributed to the improved impedance matching (e.g., from air to the first layer and from the first layer to the second layer)as well as improved interfacial polarization, which increases reflection between each layer and extends the electromagnetic wave propagation path [48,58].The combination of low dielectric loss (700 M)and high dielectric loss (750 M) resulted in improved loss absorption.Since the reflectivity gradually increased from top to bottom,the electromagnetic waves can penetrate deeper in a multilayer sample than in a single layer [57].Overall, these findings demonstrated that CMP has excellent adjustability across multiple frequency bands and is expected to be valuable in a variety of absorbing ranges and applications.

    Table 1 compared previously reported absorption materials to determine the superiority of CMP in the preparation of MA materials.The medium powder of 750 CMP containing 50 wt% paraffin exhibited relatively high EMW absorption values at lower thicknesses compared to other works.The absorbent simply using carbonized MP and controlled particle size has better EMW performance than part of multiphase composite absorbents with complicated process, showing an obvious application prospect for the preparation of high performance of EMW absorption material.The absorbent prepared by carbonized MP with controlled particle size has better MA performance than other absorbents with complicated process, showing an obvious application prospect for the preparation of high performance of MA material.Benefitting from the tunable dielectric permittivity and multi-layer gradient of CMP, it exhibits attractive multifunction and EMW absorption capability for more complex absorption environments and fields.

    4.Conclusions

    CMPs were used as a highly efficient absorber for EMW absorption due to their strong complex permittivity after carbonization.Hollow defects or surface defects on the 750 CMP and 800 CMP were found by SEM to endow the multiple reflection propagation paths under the CMP,resulting in strong reflection loss in the 2 GHz-18 GHz range.The multiple reflection such as interface polarization effect and defect or chemical bonds under CMP were confirmed by Cole-Cole semicircle and SEM.The increase in carbonization temperature leaded to a stronger complex dielectric constant and also increases the impedance mismatch.Besides, it was observed that the complex dielectric decreased with the reduction of particle size for 750 CMP due to the connection between the fine particles was isolated by paraffin as shown in POM.The medium powder of 750 CMP exhibited the strongest EMW absorption at a thickness of 5.5 mm, with a maximum reflection loss of -53 dB at 3.49 GHz and a maximum effective absorption(<-10 dB) of 3.4 GHz at 1.5 mm.More importantly, through CST optimization, the CMP can be multi-gradient compounded to achieve absorption effects in specific frequency bands.Overall, the absorption performance of CMP can be flexibly tuned by either controlling the carbonization temperature/particle size or the thickness of muti-layer, showing an obvious application prospect for the large-scale preparation of specific highly efficient EMW absorption material.

    Declaration of competing interest

    The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

    Acknowledgements

    This work was supported by Sichuan Science and Technology Program, Grant No.2022YFG0111, the Postdoctoral Innovative Talent Support Program(Grant No.BX20190220),and the State Key Laboratory of Polymer Materials Engineering (Grant No.sklpme2019-2-02) for financial support.

    Appendix A.Supplementary data

    Supplementary data to this article can be found online at https://doi.org/10.1016/j.dt.2022.07.011.

    一进一出抽搐动态| 色综合站精品国产| 国产男靠女视频免费网站| 国产黄片美女视频| 大香蕉久久网| 精品久久久久久久人妻蜜臀av| 午夜福利成人在线免费观看| 麻豆乱淫一区二区| 禁无遮挡网站| 日本爱情动作片www.在线观看 | 最近在线观看免费完整版| 亚洲av一区综合| 97在线视频观看| 日韩欧美三级三区| 婷婷色综合大香蕉| 亚洲国产高清在线一区二区三| 国产精品99久久久久久久久| 国产av麻豆久久久久久久| 老女人水多毛片| 亚洲成人精品中文字幕电影| 悠悠久久av| 国产精品一区二区性色av| av天堂中文字幕网| 看十八女毛片水多多多| 久久久久免费精品人妻一区二区| 成人精品一区二区免费| 免费一级毛片在线播放高清视频| 久久人妻av系列| 国产久久久一区二区三区| 免费看av在线观看网站| 午夜爱爱视频在线播放| 国产精品久久视频播放| 色播亚洲综合网| 18禁在线播放成人免费| 夜夜爽天天搞| 小说图片视频综合网站| 麻豆一二三区av精品| 又爽又黄a免费视频| 亚洲图色成人| 内地一区二区视频在线| 麻豆av噜噜一区二区三区| 美女 人体艺术 gogo| 麻豆成人午夜福利视频| 欧美成人一区二区免费高清观看| 日日干狠狠操夜夜爽| 听说在线观看完整版免费高清| 国产黄a三级三级三级人| 99热只有精品国产| 99热只有精品国产| 一级毛片电影观看 | 亚洲国产欧洲综合997久久,| 精品久久久久久久久亚洲| 无遮挡黄片免费观看| 精品人妻视频免费看| 蜜臀久久99精品久久宅男| av在线观看视频网站免费| 91午夜精品亚洲一区二区三区| 在线观看免费视频日本深夜| 伦理电影大哥的女人| 日韩国内少妇激情av| 中国美白少妇内射xxxbb| 免费av观看视频| 18+在线观看网站| 国产精品不卡视频一区二区| 不卡视频在线观看欧美| 国产毛片a区久久久久| 色5月婷婷丁香| 色5月婷婷丁香| 久久精品国产亚洲av涩爱 | 国产 一区 欧美 日韩| 国产精品久久久久久久久免| 国产单亲对白刺激| 成年女人毛片免费观看观看9| a级毛片a级免费在线| 少妇高潮的动态图| 在线免费观看的www视频| 欧美区成人在线视频| 变态另类成人亚洲欧美熟女| 婷婷精品国产亚洲av| 亚洲av二区三区四区| 熟女电影av网| 一区二区三区高清视频在线| 国产免费一级a男人的天堂| av在线蜜桃| 大型黄色视频在线免费观看| 久久欧美精品欧美久久欧美| 亚洲精品亚洲一区二区| 波多野结衣高清无吗| 亚洲欧美日韩无卡精品| 日本色播在线视频| 国产精品一及| 有码 亚洲区| а√天堂www在线а√下载| 色av中文字幕| 久久精品夜色国产| 成年女人毛片免费观看观看9| 级片在线观看| 大又大粗又爽又黄少妇毛片口| 国产亚洲精品av在线| 婷婷亚洲欧美| 国产一级毛片七仙女欲春2| 村上凉子中文字幕在线| 男人舔女人下体高潮全视频| 黑人高潮一二区| 露出奶头的视频| 国产精品久久久久久av不卡| 午夜免费激情av| 久久人人爽人人片av| 精品99又大又爽又粗少妇毛片| 又爽又黄a免费视频| 亚洲丝袜综合中文字幕| 国产精品99久久久久久久久| 一级黄色大片毛片| 成年女人看的毛片在线观看| 亚洲中文字幕一区二区三区有码在线看| 男人舔奶头视频| 99久久精品热视频| 久久久精品欧美日韩精品| 久久国内精品自在自线图片| 国产精品美女特级片免费视频播放器| 欧美成人免费av一区二区三区| 国产在视频线在精品| 99热这里只有是精品50| 亚洲欧美成人精品一区二区| 99视频精品全部免费 在线| 人人妻,人人澡人人爽秒播| 搡女人真爽免费视频火全软件 | 国产成人91sexporn| 久久精品影院6| 久久6这里有精品| 久99久视频精品免费| 久久久a久久爽久久v久久| 亚洲av五月六月丁香网| 亚洲中文字幕一区二区三区有码在线看| 又粗又爽又猛毛片免费看| 国产一区二区三区av在线 | 午夜影院日韩av| 少妇被粗大猛烈的视频| 国产亚洲91精品色在线| 亚洲精品国产成人久久av| 国产不卡一卡二| 日本色播在线视频| 少妇的逼水好多| 免费av观看视频| 人妻久久中文字幕网| 老司机福利观看| 国产 一区 欧美 日韩| 国产午夜精品论理片| 国产毛片a区久久久久| 国内少妇人妻偷人精品xxx网站| 午夜福利在线在线| 国产精品一及| 亚洲性夜色夜夜综合| 性插视频无遮挡在线免费观看| 啦啦啦啦在线视频资源| 日本一本二区三区精品| 亚洲国产日韩欧美精品在线观看| 亚洲av二区三区四区| 亚洲激情五月婷婷啪啪| avwww免费| 舔av片在线| 亚洲av免费高清在线观看| 精品午夜福利视频在线观看一区| 久久久精品大字幕| 不卡视频在线观看欧美| 中文字幕av成人在线电影| 久久精品夜夜夜夜夜久久蜜豆| 十八禁网站免费在线| 丝袜美腿在线中文| 国产美女午夜福利| 亚洲国产精品久久男人天堂| 精品国内亚洲2022精品成人| 亚洲最大成人中文| 久久久国产成人免费| 亚洲av免费高清在线观看| 女的被弄到高潮叫床怎么办| 亚洲成av人片在线播放无| 大型黄色视频在线免费观看| 国产私拍福利视频在线观看| 欧美日韩乱码在线| 亚洲四区av| 亚洲美女搞黄在线观看 | 亚洲国产欧美人成| 免费人成视频x8x8入口观看| 少妇人妻精品综合一区二区 | 简卡轻食公司| 亚洲国产精品久久男人天堂| 成人高潮视频无遮挡免费网站| 色在线成人网| 女人十人毛片免费观看3o分钟| 又黄又爽又刺激的免费视频.| 久久久午夜欧美精品| 美女内射精品一级片tv| 尾随美女入室| 少妇的逼好多水| 久久草成人影院| 成年女人看的毛片在线观看| 99国产精品一区二区蜜桃av| 国产亚洲精品综合一区在线观看| 天堂动漫精品| 日本在线视频免费播放| 国产 一区精品| 美女cb高潮喷水在线观看| 91在线观看av| 亚洲av美国av| 蜜桃久久精品国产亚洲av| 人妻夜夜爽99麻豆av| 日韩成人av中文字幕在线观看 | a级毛片免费高清观看在线播放| 国产91av在线免费观看| 97碰自拍视频| 日韩亚洲欧美综合| 伦理电影大哥的女人| 男女边吃奶边做爰视频| 又爽又黄a免费视频| 日本五十路高清| 性色avwww在线观看| 亚洲无线观看免费| 男女边吃奶边做爰视频| 精品一区二区三区av网在线观看| 午夜a级毛片| 午夜激情欧美在线| 寂寞人妻少妇视频99o| 一夜夜www| 成人美女网站在线观看视频| 男人舔女人下体高潮全视频| 欧美丝袜亚洲另类| 午夜福利在线观看免费完整高清在 | 久久亚洲精品不卡| 日韩 亚洲 欧美在线| 国语自产精品视频在线第100页| 久久久久久国产a免费观看| 别揉我奶头 嗯啊视频| 亚洲激情五月婷婷啪啪| 精品一区二区三区视频在线| 高清午夜精品一区二区三区 | 91精品国产九色| 成人av一区二区三区在线看| а√天堂www在线а√下载| 国产探花在线观看一区二区| 成人国产麻豆网| 国产中年淑女户外野战色| 在线天堂最新版资源| 一级毛片久久久久久久久女| 久久久欧美国产精品| 国产精品一及| 欧美国产日韩亚洲一区| 日本色播在线视频| 最新在线观看一区二区三区| 97碰自拍视频| 人妻少妇偷人精品九色| 不卡一级毛片| 男插女下体视频免费在线播放| 内射极品少妇av片p| 少妇的逼好多水| 尤物成人国产欧美一区二区三区| 男女下面进入的视频免费午夜| 午夜激情福利司机影院| 悠悠久久av| 久久天躁狠狠躁夜夜2o2o| 国产精品亚洲美女久久久| 变态另类丝袜制服| 亚洲欧美日韩高清在线视频| 国产精品免费一区二区三区在线| 亚洲不卡免费看| 午夜福利18| 熟女人妻精品中文字幕| 欧美日韩一区二区视频在线观看视频在线 | 国产精品一区二区三区四区久久| 中文字幕免费在线视频6| 又粗又爽又猛毛片免费看| 在线观看66精品国产| 长腿黑丝高跟| 亚洲人成网站高清观看| 国产精品久久久久久精品电影| 成年免费大片在线观看| 成人av一区二区三区在线看| 国产精华一区二区三区| 国产老妇女一区| 亚洲av熟女| 国产亚洲精品av在线| 国产国拍精品亚洲av在线观看| 国产久久久一区二区三区| 国产一区二区三区av在线 | 人人妻人人看人人澡| 亚洲一级一片aⅴ在线观看| 中文字幕免费在线视频6| av在线观看视频网站免费| av女优亚洲男人天堂| 99视频精品全部免费 在线| 日日摸夜夜添夜夜爱| 国产精品不卡视频一区二区| 日韩强制内射视频| 精品久久久久久久久久免费视频| eeuss影院久久| 成年免费大片在线观看| av中文乱码字幕在线| 99久国产av精品国产电影| 婷婷精品国产亚洲av| 日本a在线网址| 免费av观看视频| 床上黄色一级片| 日韩欧美国产在线观看| 国产精品久久久久久精品电影| 欧美成人免费av一区二区三区| 日本五十路高清| 乱系列少妇在线播放| 全区人妻精品视频| 亚洲欧美清纯卡通| 国产精品久久久久久久电影| 国产精品久久视频播放| 国产高清不卡午夜福利| 欧美xxxx黑人xx丫x性爽| 久久久久国产精品人妻aⅴ院| 免费看美女性在线毛片视频| 欧美日本视频| 国产精品精品国产色婷婷| 日日摸夜夜添夜夜添小说| 在线免费观看的www视频| 日本三级黄在线观看| 日韩中字成人| 人妻久久中文字幕网| 亚洲自拍偷在线| 免费在线观看成人毛片| 免费看a级黄色片| 女生性感内裤真人,穿戴方法视频| 亚洲av成人精品一区久久| 免费av毛片视频| 午夜精品国产一区二区电影 | 99热只有精品国产| av黄色大香蕉| 丰满人妻一区二区三区视频av| 国产精品久久电影中文字幕| 草草在线视频免费看| 亚洲av电影不卡..在线观看| 少妇丰满av| 国产v大片淫在线免费观看| 2021天堂中文幕一二区在线观| 久久久国产成人免费| 国产午夜福利久久久久久| 18禁裸乳无遮挡免费网站照片| 一个人看的www免费观看视频| 亚洲av第一区精品v没综合| 国产成人一区二区在线| 观看美女的网站| 国产精品亚洲美女久久久| 最近视频中文字幕2019在线8| 国产欧美日韩精品一区二区| 国产精品日韩av在线免费观看| 午夜精品一区二区三区免费看| 国产精品国产三级国产av玫瑰| 国产在视频线在精品| 菩萨蛮人人尽说江南好唐韦庄 | 久久午夜福利片| 亚洲经典国产精华液单| 日韩欧美精品免费久久| 成年女人看的毛片在线观看| 麻豆成人午夜福利视频| 久久精品人妻少妇| 中文字幕精品亚洲无线码一区| 久久久久久九九精品二区国产| 国产淫片久久久久久久久| 我的老师免费观看完整版| 日本欧美国产在线视频| 国产高清视频在线播放一区| 少妇人妻精品综合一区二区 | 久久精品夜夜夜夜夜久久蜜豆| 人妻久久中文字幕网| eeuss影院久久| 人妻久久中文字幕网| 色噜噜av男人的天堂激情| 亚洲av电影不卡..在线观看| 九九久久精品国产亚洲av麻豆| 色尼玛亚洲综合影院| 日韩欧美一区二区三区在线观看| 午夜久久久久精精品| 久久久久久久久大av| 尤物成人国产欧美一区二区三区| 久久久久久久久久黄片| 大又大粗又爽又黄少妇毛片口| 久久精品影院6| 可以在线观看毛片的网站| 床上黄色一级片| 天堂av国产一区二区熟女人妻| 麻豆国产97在线/欧美| 99热精品在线国产| 噜噜噜噜噜久久久久久91| 久久亚洲国产成人精品v| 免费看美女性在线毛片视频| 国产精品国产高清国产av| 少妇猛男粗大的猛烈进出视频 | 久久久久久伊人网av| 高清毛片免费看| 久久久久久久久大av| 观看免费一级毛片| 有码 亚洲区| 国产在线男女| 亚洲av一区综合| 久久精品国产亚洲av涩爱 | 九九爱精品视频在线观看| 日韩制服骚丝袜av| 亚洲欧美日韩高清在线视频| 欧美性猛交黑人性爽| 亚洲欧美成人精品一区二区| 91在线精品国自产拍蜜月| 白带黄色成豆腐渣| 国产精华一区二区三区| 大型黄色视频在线免费观看| 国产精品一二三区在线看| 国产爱豆传媒在线观看| 欧美xxxx黑人xx丫x性爽| 欧美绝顶高潮抽搐喷水| 欧美精品国产亚洲| 中文字幕久久专区| 丰满乱子伦码专区| 精品少妇黑人巨大在线播放 | 舔av片在线| 精品少妇黑人巨大在线播放 | 免费观看人在逋| 欧美日本视频| 久久久久久久午夜电影| 国产色婷婷99| 听说在线观看完整版免费高清| 天堂av国产一区二区熟女人妻| 91麻豆精品激情在线观看国产| 直男gayav资源| 我的女老师完整版在线观看| 国产欧美日韩精品一区二区| 免费大片18禁| 黄色配什么色好看| 午夜老司机福利剧场| 欧美三级亚洲精品| 99热6这里只有精品| 2021天堂中文幕一二区在线观| 国产v大片淫在线免费观看| 草草在线视频免费看| 丝袜喷水一区| 久久久久久久午夜电影| 伊人久久精品亚洲午夜| 一级毛片我不卡| 国产高潮美女av| aaaaa片日本免费| 亚洲国产精品sss在线观看| 九九爱精品视频在线观看| 精品乱码久久久久久99久播| 少妇的逼水好多| 免费看美女性在线毛片视频| 亚洲av五月六月丁香网| 精品欧美国产一区二区三| 两个人的视频大全免费| 国产精华一区二区三区| 国产精品亚洲一级av第二区| а√天堂www在线а√下载| 美女cb高潮喷水在线观看| 欧美激情久久久久久爽电影| 露出奶头的视频| 亚洲丝袜综合中文字幕| 久久久久久久久大av| 免费黄网站久久成人精品| 神马国产精品三级电影在线观看| 亚洲精品国产av成人精品 | 日本 av在线| 国产真实乱freesex| 亚洲中文字幕日韩| 亚洲欧美日韩卡通动漫| 久久久久免费精品人妻一区二区| 久久久久久久午夜电影| 国产探花在线观看一区二区| 亚州av有码| 国产综合懂色| 国产蜜桃级精品一区二区三区| 精品午夜福利视频在线观看一区| 国产精品福利在线免费观看| 久久人人爽人人片av| 又粗又爽又猛毛片免费看| 可以在线观看的亚洲视频| 悠悠久久av| 观看美女的网站| 中国美白少妇内射xxxbb| 综合色av麻豆| 中文字幕av在线有码专区| 97在线视频观看| 午夜免费男女啪啪视频观看 | 久久久久久久亚洲中文字幕| 日韩欧美一区二区三区在线观看| 国产久久久一区二区三区| 欧美精品国产亚洲| 欧美绝顶高潮抽搐喷水| 禁无遮挡网站| 国产精品福利在线免费观看| 中文字幕人妻熟人妻熟丝袜美| 97在线视频观看| 又黄又爽又免费观看的视频| 好男人在线观看高清免费视频| 亚洲精品在线观看二区| 亚洲第一电影网av| 91久久精品国产一区二区三区| 色综合色国产| 能在线免费观看的黄片| 色噜噜av男人的天堂激情| 午夜精品一区二区三区免费看| 深爱激情五月婷婷| 国产老妇女一区| 午夜激情福利司机影院| 九九久久精品国产亚洲av麻豆| 国产av麻豆久久久久久久| 狠狠狠狠99中文字幕| 精品一区二区三区视频在线观看免费| 麻豆精品久久久久久蜜桃| 菩萨蛮人人尽说江南好唐韦庄 | 少妇熟女欧美另类| www.色视频.com| 国产精品野战在线观看| 亚洲欧美日韩卡通动漫| 国产女主播在线喷水免费视频网站 | 日本黄色视频三级网站网址| 桃色一区二区三区在线观看| 久久中文看片网| 中国美白少妇内射xxxbb| 日韩欧美精品免费久久| 人人妻人人澡欧美一区二区| 午夜久久久久精精品| 嫩草影院精品99| 小说图片视频综合网站| 久久久久性生活片| www.色视频.com| 国产精品人妻久久久久久| 久久韩国三级中文字幕| 中文字幕av成人在线电影| 成年av动漫网址| 女生性感内裤真人,穿戴方法视频| 精品少妇黑人巨大在线播放 | 亚洲国产精品成人综合色| 亚洲一区二区三区色噜噜| 国产亚洲欧美98| 午夜a级毛片| 免费一级毛片在线播放高清视频| 亚洲国产精品成人综合色| 国产爱豆传媒在线观看| 亚洲美女搞黄在线观看 | 老熟妇乱子伦视频在线观看| 可以在线观看的亚洲视频| 日本 av在线| 亚洲人成网站在线观看播放| 亚洲欧美日韩卡通动漫| 精品人妻偷拍中文字幕| 内地一区二区视频在线| 淫秽高清视频在线观看| 精品不卡国产一区二区三区| 夜夜夜夜夜久久久久| 亚洲av免费在线观看| 日韩国内少妇激情av| 日本欧美国产在线视频| www日本黄色视频网| 成人欧美大片| 欧美成人a在线观看| 国产精品久久久久久亚洲av鲁大| 在线播放国产精品三级| 成人漫画全彩无遮挡| 成年女人看的毛片在线观看| 亚洲欧美精品综合久久99| 麻豆国产97在线/欧美| 人人妻人人澡人人爽人人夜夜 | 国产高清视频在线播放一区| 国产精品久久电影中文字幕| 国产精品爽爽va在线观看网站| av福利片在线观看| 麻豆av噜噜一区二区三区| 国产高清视频在线观看网站| 看免费成人av毛片| 人妻少妇偷人精品九色| 日韩欧美一区二区三区在线观看| 91狼人影院| 1024手机看黄色片| 久久这里只有精品中国| 尾随美女入室| 1024手机看黄色片| 亚洲美女视频黄频| 中国美白少妇内射xxxbb| 男人和女人高潮做爰伦理| 精华霜和精华液先用哪个| 看片在线看免费视频| 久久午夜福利片| 国产一区二区三区av在线 | 亚洲av中文av极速乱| 中文字幕人妻熟人妻熟丝袜美| 免费观看人在逋| 久久久久久九九精品二区国产| 国内久久婷婷六月综合欲色啪| 美女xxoo啪啪120秒动态图| 成年女人看的毛片在线观看| 亚洲av电影不卡..在线观看| or卡值多少钱| 亚洲第一区二区三区不卡| 校园春色视频在线观看| 亚洲精品国产成人久久av| 成年女人看的毛片在线观看| 精品99又大又爽又粗少妇毛片| 国产一区二区三区在线臀色熟女| 国产极品精品免费视频能看的| 欧美成人免费av一区二区三区| 综合色av麻豆| 不卡一级毛片| 久久精品国产亚洲av天美| 免费大片18禁| 国产精品综合久久久久久久免费| 级片在线观看| 成人午夜高清在线视频| 久久久午夜欧美精品| 午夜精品一区二区三区免费看| 欧美成人a在线观看| 亚洲成人精品中文字幕电影| 一级毛片aaaaaa免费看小| 18禁裸乳无遮挡免费网站照片| 五月伊人婷婷丁香|