Promotional effect of Cu additive for the selective catalytic oxidation of n-butylamine over CeZrOx catalyst

Xin Xing,Ting Zho,Jie Cheng,?,Xioxio Dun,Wenpeng Li,Gnggng Li,Zhongshen Zhng,Zhengping Ho

a National Engineering Laboratory for VOCs Pollution Control Material &Technology,Research Center for Environmental Material and Pollution Control Technology,University of Chinese Academy of Sciences,Beijing 101408,China

b College of Environmental Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China

Keywords:N-Butylamine CeCuaZrOx mixed oxide Selective oxidation Oxygen vacancies Reaction mechanism

ABSTRACT The catalytic elimination of nitrogen-containing volatile organic compounds (NVOCs) still encounters bottlenecks in NOx formation and low N2 selectivity.Here,a series of Cu-promoted Ce-Zr mixed oxide catalysts were synthesized using a simple precipitation approach,and n-butylamine was adopted as the probe pollutant to evaluate their catalytic performance.The CeCu10%ZrOx catalyst exhibited the best catalytic activity,with 100% n-butylamine conversion and 90% N2 selectivity at 250 °C.Concurrently,this sample also displayed good water resistance.A detailed characterization of the catalyst was performed through a series of experimental studies and theoretical calculations.The addition of Cu increased the redox property and promoted the production of oxygen vacancies,all of which were favorable for the greatest nbutylamine selective catalytic oxidation performance.The changes of oxygen vacancies over CeCu10%ZrOx in reaction process were studied by in situ Raman spectra.Moreover, in situ diffuse reflectance infrared Fourier transform spectra (DRIFTs) and theoretical calculations were employed to explore the reaction mechanism of n-butylamine selective oxidation.The high activity and selectivity of this catalyst confirm the practical feasibility of the selective oxidation of n-butylamine to CO2 and N2,and the exploration of the reaction mechanism provides new insights into the further design of catalysts.

Main volatile organic compounds (VOCs) are crucial precursors of secondary organic aerosol,ozone pollution,and photochemical smog [1–5].Nitrogen-containing VOCs (NVOCs),such as acrylonitrile,n-butylamine andN,N-dimethylformamide,which are typical NVOCs,are most frequently in the emission of the petrochemical,pharmaceutical,coating industries [3,6].NVOCs will cause substantial pollution to the environment and exert strong toxic effects on the human body.For the elimination of NVOCs,the traditional combustion technology usually operates at high temperatures,which leads to highly energy consumption and secondary pollutant NOxformation [7].Conversely,selective catalytic oxidation (SCO) technology can realize selective generation of nitrogen and reduce the generation of nitrogen oxides [8].Therefore,effective catalysts with a high catalytic conversion rate and N2selectivity in the decomposition of NVOCs must be explored.

A number of studies describing the catalytic degradation of NVOCs have been published.According to Nanbaet al.,Cu/ZSM-5 could completely convert acrylonitrile with an N2selectivity of at least 80% at a temperature greater than 350 °C [7-9].Zhanget al.reported the nearly complete conversion of acetonitrile by Cu/SBA-15 that was associated with an N2selectivity of approximately 80%atT >300 °C,and thus Cu/SBA-15 was the most promising catalyst[10].Zhouet al.investigated CrCe supporting on different pillared interlayered clays catalysts for the NVOCs (n-butylamine,ethylenediamine,and acetonitrile) oxidation [11].Maet al.discussed the high catalytic activity of Pd-confined materials,showed the complete conversion ofn-butylamine at 280 °C and explored the structure activity relationship and the reaction mechanism [12].However,it is rarely reported that low temperature (<300 °C) catalytic oxidation of NVOCs can be achieved on non-noble metal catalysts.In particular,the catalysts simultaneously exhibit high conversion and N2selectivity at low temperatures.

In recent years,as a rare earth metal oxide,CeO2has excellent oxygen storage performance,which was used to catalyze various reactions,such as nitric oxide reduction,carbon monoxide oxidation and NH3oxidation reactions [13–15].Wanget al.observed that the CuO-CeO2sample exhibited highly dispersed CuO species,which possessed the highest activity in NH3oxidation [16].The Ce-Zr mixed oxide has been used as a catalyst or support for NOxselective catalytic reduction,because it combines the advantages of CeO2and ZrO2.Siet al.impregnated CeO2-ZrO2with nickel and sulfate were to improve the catalytic performance for removal of NO with NH3[17].

To take full advantage of the Ce-Zr mixed oxide and the promoting effect of Cu,CeZrOxand CeCuaZrOx(a=1%,5%,10%,and 15%) were synthesized using a precipitation method and tested for selective oxidation ofn-butylamine in the present study.The catalysts showed highn-butylamine conversion rates and N2selectivity.Moreover,the structure,physical properties,oxygen species,and redox ability of catalysts were also characterized by various techniques,and the reaction mechanism underlying the catalytic degradation ofn-butylamine was also discussed.

The structure and physical properties of CeCuaZrOxcatalysts were characterized by X-ray diffraction (XRD),high resolution transmission electron microscopy (HR-TEM) and N2adsorption/desorption.The XRD results of CeCuaZrOxcatalysts are shown in Fig.S1 (Supporting information).CeZrOxdisplayed four main peaks at approximately 29.1°,33.7°,48.5° and 57.5°,consistent with the structure of Ce0.6Zr0.4O2(JCPDS No.38-1439) and corresponding to the (111),(200),(220) and (311) planes.For CeCuaZrOxcatalysts,characteristic diffraction peaks for the Ce0.6Zr0.4O2and the ZrO2phase (JCPDS No.49-1642) were obtained,indicating the weak interaction between Ce and Zr,which resulted in the segregation of CeO2and ZrO2[18,19].For CeCuaZrOxsamples,the intensity of peaks assigned to Ce0.6Zr0.4O2and ZrO2decreased significantly as Cu content increased.No obviously characteristic diffraction peaks of Cu species were presented in XRD results,indicating that Cu species were highly dispersed on the catalyst’s surface.Additionally,the CeO2crystallite sizes were calculated using the Scherrer equation and shown in Table S1 (Supporting information),it decreased a little as the increasing of Cu content.

HR-TEM images of CeCu10%ZrOxare shown in Figs.S2a and b(Supporting information),the lattice spacing values of 0.269,0.291 and 0.312 nm,which were attributed to the exposed Ce0.6Zr0.4O2(200),ZrO2(111) and (111) facets of Ce0.6Zr0.4O2,respectively.The exposure of ZrO2(111) facets indicated the presence of phase separation in the CeCu10%ZrOxcatalyst,consistent with the XRD result.Elemental mapping was performed by energy-dispersive Xray spectroscopy (EDX) to confirm the elemental distributions of Ce,Cu,Zr,and O species in CeCu10%ZrOx.As shown in Figs.S2d-h(Supporting information),the O,Ce,Cu,and Zr species were homogeneously dispersed throughout CeCu10%ZrOx,verifying that Cu2+was successfully incorporated into CeZrOx.

N2adsorption/desorption isotherms and pore size distribution of CeCuaZrOxcatalysts are shown in Fig.S3 (Supporting information).According to International Union of Pure and Applied Chemistry (IUPAC) classification,all the catalysts presented type IV isotherm curves,indicated that the samples are typical mesoporous materials.The special surface area (SSA),pore volume and pore size are calculated by N2physical adsorption results of CeZrOxand CeCuaZrOxcatalysts and shown in Table S1.The addition of CuO in CeZrOxhad a significant impact on the special surface area.As the contents of Cu increased from 1% to 15%,the SSA of the samples grew from 61 to 85 m2/g,CeCu15%ZrOxexhibited the largest surface area of 85 m2/g.The results showed that the introduction of Cu into the CeZrOxcould lead to the change of the structure,further result in the higher specific surface area [20],which is instrumental in the dispersion of Cu species.

The conversion ofn-butylamine and characteristic activity data are shown in Fig.1a and Table S1.Obviously,the addition of Cu increased then-butylamine conversion in all samples.The temperature recorded at 50% and 90%n-butylamine conversion(T50andT90) decreased in the order CeZrOx >CeCu15%ZrOx >CeCu10%ZrOx >CeCu5%ZrOx >CeCu1%ZrOx.Interestingly,the values ofT100decreased in the order CeZrOx >CeCu1%ZrOx=CeCu5%ZrOx>CeCu10%ZrOx=CeCu15%ZrOx.The activities of CeCuZrOxcatalysts were higher than the values reported in the literature (Table S2 in Supporting information).As shown in Fig.1a,the conversionvs.temperature plot ofn-butylamine oxidation over CeZrOxexhibited a relativity lower conversion rate,while complete conversion was achieved at approximately 350 °C.Furthermore,nbutylamine oxidation activity in the presence of Cu in CeZrOxwas very similar,the conversion ofn-butylamine progressively increased with the temperature rising,and a 100%n-butylamine conversion rate was achieved at about 300 °C.Then-butylamine conversion over CeCuaZrOxsamples is tightly related to the Cu contents.CeCu10%ZrOxand CeCu15%ZrOxexhibited the highest activity and achieved 100%n-butylamine conversion at 250 °C.

The selectivity to CO2and CO over CeCuaZrOxcatalysts duringn-butylamine oxidation is shown in Figs.1b and c.For CO2formation,as shown in Fig.1b,the selectivity to CO2over CeZrOxand CeCuaZrOxcatalysts increased with the increasing of temperature and achieved 100% at a higher temperature.The shape of CO2selectivity showed the same trend as that ofn-butylamine conversion rates over CeCuaZrOx,and the CO2selectivity increased with the increase of copper contents.For CO formation,as shown in Fig.1c,the CO selectivity over CeZrOxand CeCuaZrOxcatalysts first increased and then decreased.Relative higher amount of CO was formed over CeZrOx,and the formation of CO over CeCuaZrOxdecreased with the increase of copper contents.Above all,CO was almost not produced over CeCu10%ZrOxand CeCu15%ZrOxsamples at 100–400 °C.

Figs.1d–h present the selectivity of N-containing products (N2,N2O,NO,NO2and NH3) ofn-butylamine catalytic degradation over CeCuaZrOx.As seen from Fig.1d,CeZrOxexhibited very low N2selectivity at temperatures ranging from 100 °C to 300 °C.The N2selectivity over CeCuaZrOxcatalysts first increased and then decreased with the temperature rising.And the N2selectivity of CeCu10%ZrOxwas apparently higher than other catalysts,increased with the reaction temperature and reached a maximum of 90% at 250 °C.The increase in N2selectivity observed atT <300 °C for CeCuaZrOxwas probably because of copper doping.The incorporation of Cu in CeZrOxmight favor the generation of N2.While at high temperatures from 300 °C to 400 °C,the decrease in N2selectivity was caused by the formation of NOx.For the degradation of NVOCs,the crucial point for NVOCs catalytic oxidation lies in the enhancement of the nitrogen generation and control of NOxproduction,avoiding secondary pollution.

To get an intensive study into the catalytic behaviors of CeCuaZrOxcatalysts,the undesirable byproducts (N2O,NO,NH3,NO2) selectivity are respectively depicted in Figs.1e–h.As noted,NO was the main N-containing byproducts for CeZrOxand CeCuaZrOxcatalysts.NO selectivity first increased to 8% and then decreased atT <250 °C.Besides,selectivity to NO over CeCuaZrOxincreased with the raising of copper content atT >250 °C.The selectivity to NO over catalysts increased upon the rising temperature and achieved 50% at 400 °C.Additionally,NO2was generated over CeCuaZrOxat 300 °C,and the production of NO and NO2at high temperatures is the major cause for the decrease of N2selectivity.Fig.1i shows N-containing product selectivity atT100.CeCu10%ZrOxhad the highest N2selectivity,as well as the lowest NO selectivity.Less NH3formation occurred with CeCu5%ZrOx,CeCu10%ZrOxand CeCu15%ZrOxthan with CeCu1%ZrOxand CeZrOx.N2was the main product generated by CeCu10%ZrOx,and thus this catalyst represents a promising candidate fornbutylamine selective catalytic oxidation.At temperatures greater thanT100,the nitrogen balance was more than 95% for CeCuaZrOxcatalysts.

Fig.1.Effect of temperature on (a) conversion of n-butylamine,(b) CO2 selectivity and (c) CO selectivity.(d) N2 selectivity,(e) N2O selectivity,(f) NO selectivity,(g) NH3 selectivity,(h) NO2 selectivity,and (i) product selectivity in n-butylamine oxidation at T100 for CeCuaZrOx catalysts.

The catalytic degradation of exhaust containing water vapor may result in the deactivation of catalysts in practical application.Hence,the investigation of the effect of H2O on the catalytic performance of CeCu10%ZrOxis worthwhile.As shown in Fig.S4 (Supporting information),the addition of 15 vol% H2O exerted little inhibition effect onn-butylamine conversion.A 100%n-butylamine conversion rate was obtained atT >250 °C,which was the same as that of the reaction without H2O.Moreover,N2selectivity was slightly decreased to 85% by the addition of H2O.The decrease in N2selectivity in the reaction with CeCu10%ZrOxwas accompanied by increases in NH3and NOxformation.H2O exists in the reaction atmosphere as a reactant,and there is competitive adsorption with reactant moleculesn-butylamine and oxygen,resulting in the decrease of N2selectivity and the formation of other nitrogencontaining products.The formation of NH3may be due to the presence of H2O.H2O molecule will participate in the reaction after decomposition,and?NH2species are more likely to produce NH3.Briefly,the CeCu10%ZrOxcatalyst exhibited good resistance to H2O and thus it is potentially useful for eliminatingn-butylamine from the exhaust containing a certain amount of H2O.

The capability of oxygen species transmission and migration on Ce-Zr based catalysts are vital factors in catalytic oxidation reactions,which were evaluated using O2temperature-programmed desorption (O2-TPD),UV-vis diffuse reflectance spectra (UV-vis DRs),X-ray photoelectron spectra (XPS) and Raman.The O2-TPD patterns of the CeCuaZrOxsamples are presented in Fig.S5 (Supporting information) and could be divided into three areas.The desorption peak centered atT <200 °C,is characteristic of the desorption of ordinarily chemically adsorbed oxygen species.The area at the temperature range of 200-600 °C is ascribed to the desorption of oxygen chemically adsorbed on the oxygen vacancies [21].And the third area appeared at high temperatures,which could be attributed to the bulk lattice oxygen [22].The lattice oxygen of CeZrOxand CeCu1%ZrOxcatalysts did not appear in this temperature range,indicating that the desorption of lattice oxygen species in these samples required a higher temperature.The desorption temperatures of the first peaks decreased in the order that: CeZrOx>CeCu15%ZrOx >CeCu10%ZrOx >CeCu5%ZrOx >CeCu1%ZrOx,which was related to the catalytic activity ofn-butylamine at lower temperatures (T50andT90).It indicating that chemisorbed oxygen species was more conducive to the low-temperature activation of pollutant molecules and further oxidation to produce CO2and H2O.

The electronic states of CeCuaZrOxcatalysts were obtained from UV-vis-DRs and shown in Fig.S6 (Supporting information).The band atca.218 nm could be assigned to tetravalent Zr species with eight-coordinated [23].The band near 245 nm corresponded to the charge transfer transitions between O2?and Ce3+,which indicated the existence of oxygen vacancy.The bands for all catalysts around 310 nm and 341 nm were attributed to the charge transfer and inter band transitions of O2?and Ce4+,respectively [24,25].Based on these results,both Ce3+and Ce4+species were present in these samples,consistent with the XPS results.

Fig.2.X-ray photoelectron spectra for (a) Ce 3d,(b) O 1s of CeCuaZrOx catalysts.Raman spectra (c) and the concentration of surface oxygen vacancies (d) of CeCuaZrOx catalysts.In situ visible Raman spectra (e) and A615/A465 (f) of CeCu10%ZrOx.

The surface chemical state of CeCuaZrOxcatalysts was obtained from an XPS analysis,and the results are presented in Fig.2.The surface compositions of the samples (Cu,Ce,Zr and O) are displayed in Table S3 (Supporting information).The XPS results for the Ce3d spectra of CeZrOxand CeCuaZrOxcatalysts are shown in Fig.2a.The labels are used to identify Ce 3d peaks,where u and v refer to the 3d3/2and 3d5/2spin-obit components,respectively.The peaks referred to as u,u′′,v,and v′′ were assigned to Ce3+species and the other six peaks (u′,u′′′,u′′′′,v′,v′′′ and v′′′′) represented the presence of Ce4+[26].Thus,Ce was in a partially reduced state on the surfaces of the catalysts,which might be ascribed to the interaction between Cu and Ce.Moreover,the presence of Ce3+led to a charge imbalance that was assigned to the formation of oxygen vacancies,consistent with the charge compensation.The surface Ce3+concentration of total Ce (Ce3++Ce4+)on the CeCu10%ZrOxwas 0.40 (Table S3),which was higher than other samples and indicted the formation of more oxygen vacancies on CeCu10%ZrOx.The high Ce3+content in CeCu10%ZrOxmight result from the increased reducibility of CeO2caused by the synergistic effect of Cu species and Ce species.As shown in Table S3,the incorporation of Cu into these samples significantly increases the proportion of Ce3+/(Ce3++Ce4+).We believe that is due to the Cu species introduction and the transfer of electrons from Cu+to Ce4+.

Fig.2b displays the O 1s XPS spectra for CeCuaZrOxcatalysts.The main peak was observed at around 529.4 eV and assigned to the lattice oxygen of catalysts.And the shoulder peak centered at 531.5 eV could be ascribed to the chemisorbed oxygen species [27].According to the literature,in the oxidation reaction,the surface chemisorbed oxygen is more active than lattice oxygen because of its strong mobility [28].Moreover,the percentages of Oads/Olattare calculated and shown in Table S3 (Supporting information).Compared with CeZrOx,higher contents of chemisorbed oxygen were observed on the surface of CeCuaZrOx,implying that Cu introduction increased the concentration of activated adsorbed oxygen species.Additionally,the percentages of Oadsand Olattin CeCu10%ZrOx(0.79) were relatively higher among all samples,suggesting that more chemisorbed oxygen species were presented on the surface of CeCu10%ZrOx.Hence,these results indicated well catalytic activity and N2selectivity for the degradation ofn-butylamine over CeCu10%ZrOx.

The comparison of Raman spectra of CeZrOxand CeCuaZrOxcatalysts is shown in Fig.2c.Raman spectra of all samples displayed an absorption band at around 470 cm?1,corresponding to the characteristic F2gvibration mode of fluorite CeO2.The broad bands at 620 cm-1were assigned to oxygen vacancies and ascribed to the presence of defective structures in CeCuaZrOxsamples.In addition,this finding also indicated the formation of Cu-Ce-Zr solid solution,which could enhance the formation of oxygen vacancies [29].The weak band at 310 cm?1was ascribed to the substitution of oxygen atoms from the ideal lattice positions.Finally,a weak intensity Raman peak was observed at 130 cm-1and ascribed to Zr doping into the lattice of Ce,which led to the distortion of the framework symmetry.The intensity of the band at 470 cm-1decreased as the copper content increased and might be related to the optical absorption of copper [30].In addition,the existence of Cu influenced the position and intensity of the F2gband at 470 cm?1.Copper incorporation into CeZrOxled to a red shift(from 470 cm?1to 450 cm?1) and the broadening of F2gpeaks,which was related to the formation of oxygen vacancies.Meanwhile,the band at 620 cm?1showed increasing intensity,further verifying the existence of oxygen vacancies caused by the incorporation of copper into the lattice [31].The areas ratio of the peaks at 470 cm?1(A470) and 620 cm?1(A620) reflects the concentration of oxygen vacancies [29].TheA620/A470value for CeCuaZrOxrapidly increased compared with CeZrOx(Fig.2d),suggesting that the addition of Cu resulted in a higher oxygen vacancy concentration in CeCuaZrOxsamples,and we reached a similar conclusion from the theoretical calculations.Thus,the CeCu10%ZrOxcatalyst could generate more oxygen vacancies among other samples,because of the value ofA620/A470and the shift of the F2gpeaks.Finally,this catalyst would promote the performance ofn-butylamine selective oxidation.

In situvisible Raman spectra of CeCu10%ZrOxcatalyst under a flow ofn-butylamine and O2are shown in Fig.2e.As shown in the spectra,the main peak at around 465 cm-1(F2g) always dominated throughout the reaction,indicating that the catalysts maintained the major fluorite-like structure [32].The position of the F2gpeak was slightly shifted toward a lower Raman peak as the reaction temperature increased from 30 °C to 300 °C,due to the thermal expansion and phonon confinement.In some studies,the downward shift of F2gpossibly corresponds to the thermal-induced loss of lattice O that results in the sintering of CeO2crystals [33].Additionally,in some cases,the shift was also in consequence of the lattice expansion and mode softening that occurred when oxygen vacancies are created [34].The peak at 615 cm-1was attributed to the intrinsic oxygen vacancies in CeCu10%ZrOx,which were caused by the escape of interstitial oxygen from the lattice,thus leaving oxygen vacancies in original sites [33,35].As shown in Fig.2f,the ratios ofA615/A465enhanced with the increase of temperature,indicating that more oxygen vacancies were generated in the bulk phase of CeCu10%ZrOxdue to the temperature-induced structural changes [33],and the increase in the number of oxygen vacancies promoten-butylamine oxidation.

Brief summary,the better catalytic performance of CeCu10%ZrOxdepended on the formation of surface oxygen vacancies and chemisorbed oxygen species.Mixed valences of Ce3+and Ce4+were present in the CeCuaZrOxcatalyst and accompanied the generation of oxygen vacancies due to Cu introduction.The surface Ce3+concentration on CeCu10%ZrOxwas higher than in other samples,indicating the formation of a greater number of oxygen vacancies,and the higherA620/A470ratio further confirmed the higher oxygen vacancy concentration of CeCu10%ZrOx.Furthermore,the Oads/Olattratio in CeCu10%ZrOxwas higher than in all other samples,suggesting that more chemisorbed oxygen species were presented on the surface of CeCu10%ZrOx.Hence,this catalyst displayed better performance in the catalytic oxidation ofnbutylamine.

The chemical state of Cu species was investigated by UV-vis-DRs (Fig.S6).The CeCuaZrOxcatalysts showed a weak band at around 450 nm,which could be assigned to a charge transfer band in Cu2+→O2?→Cu2+[36].In addition,the CeCuaZrOxcatalysts also exhibited broad bands at around 700 nm,it corresponded to the d-d transitions of Cu2+in octahedral symmetry.This band shifted from 650 nm to 750 nm,indicated that the coordination environment of copper species was influenced by the Cu content [37].Furthermore,this band shifted to a longer wavelength as Cu content increased from 1 wt% to 15 wt%,which was attributed to less CuO dispersion.Cu 2p XPS spectra for CeCuaZrOxcatalysts are presented in Fig.S7 (Supporting information).Two peaks centered at 932.2 and 952.1 eV were observed and potentially attributed to Cu 2p3/2and 2p1/2of Cu+,respectively,whereas two other peaks at 933.6 and 953.6 eV corresponded to the existence of Cu2+[38,39].Meanwhile,the shake-up satellite feature centered at binding energies of around 942 and 962 eV was also observed.Both Cu+and Cu2+symmetrical peaks could be found in CeCuaZrOxcatalysts.Moreover,the peak area of Cu2+species was larger than that of Cu+,indicating that the characteristics Cu species predominantly present on the surface is Cu2+.

H2-TPR measurements were performed to investigate the reduction behavior of the CeCuaZrOxcatalysts,and the results are presented in Fig.S8 (Supporting information).The reduction profile of CeZrOxrevealed a weak reduction peak that started at approximately 450 °C and was centered at 600 °C.This peak potentially corresponded to the reduction of Ce4+to Ce3+,because the reduction of Zr4+occurred at a temperature greater than 1000 °C[40,41].Additionally,the presence of a single peak for CeZrOxsuggested that the reduction of surface and bulk CeO2occurred concurrently because of the good oxygen mobility.

Obviously,the reduction behavior of CeZrOxcatalyst was altered by copper-doping.The peak at 600 °C disappeared,potentially because the reduction peak of CeO2shifted to low temperatures,which was promoted by Cu doping.The peak splitting of the H2-TPR data was performed and presented in Fig.S8b (Supporting information).The profiles of samples consisted of three peaks,which were denoted asα,βandγ.According to the literature [32,42],the attributions of the peaks are listed below.The first peak (α)is ascribed to the reduction of highly dispersed CuO species,including isolated Cu2+ions,and the small dimension of the Cu-OCu clusters.The second peak (β) is assigned to the presence of large CuO clusters.The third peak (γ) is attributed to the presence of bulk-like CuO,as well as Cu+and Ce4+reduction [32].Furthermore,values for H2consumption are present in Table S4 (Supporting information).For the CeCu10%ZrOxcatalyst,the H2consumption of peakαwas 0.71 mmol/g,which was the highest value observed among the samples and proved the best redox property.

Based on the analyses described above and combined with the catalytic activity data,the superior catalytic performance of CeCu10%ZrOxcompared with CeCuaZrOxcatalysts could be related to the fact that CeCu10%ZrOxdisplayed the highest redox ability,due to the presence of the reduction peak of highly dispersed copper oxide species at a lower temperature and the highest H2consumption of this peak among all the samples.

To identify surface intermediate species,we carried outin situDRIFTs undern-butylamine and the condition ofn-butylamine and O2.Fig.3a showsin situDRIFTs during exposure of CeCu10%ZrOxto gas mixture containingn-butylamine with helium as the balance gas at room temperature.The absorption bands ofn-butylamine were observed at 3223,3125,2962-2855,1643,1588,1466,1378,1173,1094 and 1071 cm–1.The bands at 3223 and 3125 cm?1were ascribed to the amino group ofn-butylamine,the vibrations ofv(sym)NH2and 2δNH2,respectively.The band at 1587 cm?1was also attributed to the vibration ofδNH2,and the band observed at 1094 and 1072 cm-1were assigned to the vibration ofv(CN) and t(CH2(N)) [43].The bands centered at 2963–2855,1466 and 1378 cm–1were assigned to asymmetric and symmetric bending vibrations of the C–H bonds (v(as)CH3,v(as)CH2,v(s)CH3,v(s)CH2(N),δ(as)CH3,δ(s)CH3,respectively).Simultaneously,the band at 1173 cm–1was also detected and attributed to the vibration ofv(C-C).The band observed at 1643 cm–1corresponded to the molecular adsorption of H2O.The DRIFT spectra of CeCu10%ZrOxwith an exposure to 375 ppmn-butylamine and 5% O2at room temperature are shown in Fig.3b,it was found that adding the gaseous O2would not change the adsorption species over CeCu10%ZrOx.

The catalysts were exposed to reaction conditions (375 ppmnbutylamine and 5% O2,with helium as the balance gas) to further ascertain the intermediate species of the reaction betweenn-butylamine and O2.Fig.3c illustratesin situDRIFT spectra of the CeCu10%ZrOxcatalyst in a flow ofn-butylamine+O2at various temperatures.The band intensities of the adsorption spectra ofn-butylamine decreased gradually as the temperature increased.While these band intensities decreased,the band intensity of –NH2(1583 cm–1) increased from 100 °C to 250 °C.Additionally,some new bands appeared at a temperature above 100 °C.The bands at 2177 and 2126 cm-1could be assigned to adsorbed N2O [44].The bands were observed at temperatures ranging from 150 °C to 300 °C,but disappeared at temperatures above 300 °C.The bands at 1555 and 1569 cm–1were also detected and attributed to monodentate nitrate species and bidentate nitrate species,respectively[19,45].Meanwhile,ionic nitrate (1369 cm-1) formed.Furthermore,the existence of a peak at 1434 cm–1indicated the formation of acetate species [46].Notably,the acetate species was detected at 200 °C,and its quantity increased as the temperature increased up to 300 °C.A weak band at 1344 cm–1appeared at 150 °C was attributed to the chelation of bidentate carbonate [47].An NH3species was observed at 1300 cm–1,and the band intensity increased monotonously as the temperature increased,but suddenly decreased at 300 °C [48].

Fig 3.In situ DRIFTs under n-butylamine and the condition of n-butylamine+O2.

Combining the results of DRIFT spectra and the distribution of products (Fig.1),we were able to predict two period procedures in reaction from the formation of N2O,N2,NO,NO2and NH3.

The following main reaction routes were proposed Eqs.1 and 2:

As shown in Fig.3,the intensity of the vibration peaks at 1583 and 1555 cm–1increased as the temperature increased from 100 °C to 250 °C.When the temperature increased from 100 °C to 250 °C,some portion of NH2?was oxidized into nitrate species(1555 cm–1,monodentate nitrate) and then NH2?reacted with surface nitrate species,leading to the production of N2and N2O.Within this temperature range,the formation of N2exceeded NO production.Therefore,we inferred that the reaction rate of Eq.4 is greater than Eq.3,and the formation of NO?(Eq.3) is a ratecontrolled step (Eqs.3-6).

AtT >250 °C,the gaseous O2directly participated in the reaction,and then the NH2?was over oxidized into bidentate nitrate species.According to Fig.3c,monodentate nitrate (1555 cm–1) appeared at temperatures from 100 °C to 250 °C and then was further oxidized to bidentate nitrate species (1569 cm-1) atT >250°C.Hence,we speculated that the reaction rate of Eq.7 was higher than Eq.8,most of NH2?was oxidized to stable nitrate species,and the concentration of NH2?was not sufficient for NO?reduction.At this time,the rate-controlled step was the formation of N2?(Eq.8).Moreover,NO2was generated through the reaction of NO with O2at high temperatures.These processes were described by Eqs.7–9.

Theoretical calculations were performed to study the formation energy of oxygen vacancy,the adsorption of reactants and product molecules and the reaction mechanism.In general,oxygen vacancies play a vital role in catalytic oxidation reactions.In the present study,the formation energies of two different oxygen vacancies (labeled as OvCe2Zr1and OvCe3) were calculated for the pure CeZrO2(111),as shown in Fig.4a.The optimized geometry of the structures of CeZrO2(111) with OvCe2Zr1and OvCe3vacancies are presented in Figs.4b and c,respectively.The calculated formation energy for OvCe2Zr1and OvCe3vacancies are 3.10 and 4.08 eV,respectively,indicating that the formation of O vacancy on pure CeZrO2has certain difficulties.Moreover,the structure of the Cudoped CeZrO2(111) was first investigated and the formation energies of four different oxygen vacancies (labeled as Ov1,Ov2,Ov3and Ov4) were calculated,as shown in Fig.4d.The doping of Cu promoted the formation of oxygen vacancies,as the calculatedEovvalues near the doped Cu (Ov1,Ov2,Ov3and Ov4) are much lower than the formation energy of OvCe2Zr1and OvCe3vacancies.In particular,the calculatedEovvalue for Ov1is negative,indicating that an oxygen vacancy forms spontaneously.Therefore,further computations in this study were performed using the model of a Cudoped CeZrO2(111) slab with an Ov1vacancy.

The adsorption energies of reactants and products are presented in Fig.S9 (Supporting information).The pure facets of Cu-doped CeZrO2(111) have a lower binding strength for O2,and the adsorption energy is very small (–0.01 eV),indicating the very weak physical adsorption of O2on this facet.Interestingly,as oxygen vacancies are introduced to the Cu-doped CeZrO2(111),the adsorption energy of O2becomes higher,indicating that an oxygen vacancy is more conducive to the selective catalytic oxidation ofn-butylamine.O2andn-butylamine molecules display relatively stronger binding strengths (–0.37 and –0.67 eV,respectively),while N2and CO2present very weak adsorption strengths (–0.04 and–0.12 eV,respectively).The distinct adsorption strengths will potentially improve the catalytic performance of Cu-doped CeZrO2(111) in butylamine oxidation,as the reactant easily adsorbs,while the products will desorb rapidly.

The minimum energy pathway forn-butylamine oxidation was subsequently calculated to further verify then-butylamine adsorption on the surface of the catalyst and the formation of intermediate species and N2during the reaction.As shown in Fig.4e,nbutylamine in the gas phase was initially adsorbed on exposed Ce atoms near the Ov1vacancy to form an adsorbedn-butylamine molecule.First,the C–H bond was attacked by a neighboring O to produce MS (CH3CH2CH2CHOHNH2) species;this process should overcome an energy barrier of 1.57 eV.Subsequently,the C–N bond was dissociated into?C4H9and?NH2species,which will adsorb on the exposed Ce atom and the neighboring O atom,respectively.

Fig 4.(a) Optimized geometry structures of pure CeZrO2(111),(b) CeZrO2(111) with OvCe2Zr1,(c) CeZrO2(111) with OvCe3 and the formation energy of oxygen vacancy.(d) Top and side views of the structure of Cu-doped CeZrO2(111) and the formation energy of oxygen vacancy (Ov1,Ov2,Ov3 and Ov4).(e) Minimum energy pathway for the dissociation of n-butylamine and the oxidation of NH2 into N2.Insets are the corresponding structures.

For the selective catalytic oxidation reaction ofn-butylamine,we mainly focused on the formation of N2.The transition states and reaction pathways were calculated to further confirm the mechanism of N2generation from?NH2species,as evidenced byin situDRIFTs.O2was adsorbed on oxygen vacancies (Ov1) and reacted with?NH2species to form?OONH2species with an energy of 0.39 eV,indicating that this reaction readily occurred.Subsequently,the O atom of?OONH2species was attacked by the H atom of?OONH2species,conquering a high energy barrier of 2.55 eV to produce the?NHOH species.Then,the O atom of the?NHOH species was again attacked by the H atom to form the?NO species with an energy barrier of 1.23 eV.At this time,?NO species occupied the position of the original oxygen vacancy (Ov1).The?NH2species was adsorbed on the?NO species,and should surmount an energy barrier of 1.68 eV to obtain the?NOHNH species.Finally,the H atom of the?NOHNH species attacked the O atom to generate the end product of N2after H2O was stripped.

In short,?NH2was oxidized into N2through the following steps Eqs.10 and 11:

The rate-determining step of the whole process is?OONH2=?NHOH+?O,with an energy barrier of 2.55 eV.Notably,the energy barriers were calculated without considering the effects of coverage,O2pressure,solvent,etc.Therefore,the actual reaction barriers would be much lower,indicating that the catalytic oxidation ofn-butylamine through the proposed pathway may be feasible.

In conclusion,a series of mixed CeCuaZrOxoxides were successfully synthesized and tested forn-butylamine selective catalytic oxidation.The CeCuaZrOxsample with 10% Cu showed excellent performance,exhibited 100% conversion ofn-butylamine and 90%N2selectivity at 250 °C.CeCu10%ZrOxdisplayed the highest redox ability,the reduction peak of the highly dispersed copper oxide species was located at a lower temperature,and the H2consumption of this peak is maximum.The incorporation of Cu into CeZrOxsignificantly increased the proportion of Ce3+/(Ce3++Ce4+).Additionally,more chemisorbed oxygen species and oxygen vacancies were presented in CeCu10%ZrOx.The changes in oxygen vacancies over CeCu10%ZrOxduring reaction process were studied byin situRaman spectra,and the number of oxygen vacancies gradually increased as the temperature increased.Theoretical calculations were performed to study the formation energy of oxygen vacancy,the doping of Cu could promote the formation of oxygen vacancy as the oxygen vacancies formation energy of CuCeZrOxwas much lower than that of pure CeZrOx.Furthermore,the catalytic reaction mechanism underlyingn-butylamine selective catalytic oxidation was proposed as described below.First,nbutylamine and O2were adsorbed on the oxygen vacancy (Ov1),and thenn-butylamine was attacked by the neighbor O to produce MS (CH3CH2CH2CHOHNH2) species.Subsequently,the C-N bond was dissociated,forming CH3-CH2-CH2-CH2?and NH2?.CH3-CH2-CH2-CH2?was further oxidized into CO2and H2O,and NH2?could be oxidized to NO/nitrate species through important intermediate species (?OONH2and?NHOH).Finally,NH2?reacted with NO/nitrate species,leading to the production of N2and H2O.The results of the present study are believed to provide a deeper understanding of the catalytic mechanisms and a high-performance removal of NVOCs.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgments

This work is financially supported by the R&D Program of Beijing Municipal Education Commission (No.KJZD20191443001),Beijing Municipal Science and Technology Commission (No.Z181100000118003),the Fundamental Research Funds for the Central Universities and Doctoral Research Start-up Fund Project of Taiyuan University of Science and Technology (No.20202053).

Supplementary materials

Supplementary material associated with this article can be found,in the online version,at doi:10.1016/j.cclet.2021.09.056.