上海交通大學設計學院∣張海翱
客戶:Tina,李翔
建筑設計:上海交通大學設計學院|張海翱,姚奇煒,徐航,肖夢瑩,李曉蕾,程子峻,袁胤軒
建筑設計顧問:楊偲
機械設計:德國GRG集團+合心機械制造有限公司|Tobias Wilhelm(負責人),宋凱,趙國梁,孫菲菲
智能設計:朗宜(北京)智能科技服務有限公司|李冬梅(負責人),崔衛東
建筑面積:20m2
設計時間:2016
竣工時間:2018.05
攝影:馬曉春
Client:Tina &LI Xiang
Architectural Design:School of Design,Shanghai Jiao Tong University| Zhang Haiao,YAO Qiwei,XU Hang,XIAO Mengying,LI Xiaolei,CHENG Zijun,YUAN Yinxuan
Consultant:YANG Si
Mechanical Design:Global Retool Group Gmbh &Hexin Machinery Manufacturing Co.,Ltd.| Tobias Wilhelm (Principal),SONG Kai,ZHAO Guoliang,SUN Feifei
Intelligent Design:Langyi (Beijing) Intelligent Technology Service Co.,Ltd.| LI Dongmei (Principal),CUI Weidong
Floor Area:20 m2
Design Time:2016
Completion Time:2018.05
Photos:MA Xiaochun
一對90 后的跨國夫妻,需要改造他們的愛巢。挑戰一:20m2極限空間,由于層高有限,夾層空間非常局促,同時,作為商住樓的一個格子間,上下左右均無擴展的余地。挑戰二:尷尬層高導致房間凈高不能被有效地隔為2 層,大量生活用品沒有有效的收納空間。
植入2 個可移動機械樓板,在不同高度加以控制,滿足不同的空間需求。結合傳統可變家具,整體空間實現了8 個標高×20 個翻折家具=6 大空間模式,不同模式下,房間的布局各有不同。在起居室、餐廳、健身房、家庭影院、書房、多人居之間來回變化與切換。
1 起居模式 Plan -living
2 娛樂模式 Plan -threate
3 工作室模式 Plan -studyroom
4 多人居模式 Plan -multi-living
The design request was from a post-90s multinational couple who needed to transform their home.There were two changes:first,the space was only of 20 square metres.The mezzanine space became very compressed due to the limited floor height.And as a compartment in a commercial and residential building,there was no room for expansion.Second,the restricted floor-to-ceiling height made the proposal of dividing the space into two floors hard to realise.
The design resulted in the implantation of two movable mechanical floor slabs,controlled at different heights,meeting different spatial needs.Combined with traditional transformable furniture,the overall space achieves "8 floor levels × 20 folding furniture=6 space modes".The programme of the room varies in different modes.
5 可變樓板立面 Variable floor elevations
6 草圖 Sketch
7 起居模式 Living
8 睡覺模式 Sleep
9 娛樂模式 Threater
10 工作室模式 Studyroom
11 廚房 Kitchen