• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Phase Diversity Electro-optic Sampling:A new approach to single-shot terahertz waveform recording

    2022-03-19 09:27:08ElonoreRousselChristopheSzwajClmentEvainBerndSteffenChristopherGerthBahramJalaliandSergeBielawski
    Light: Science & Applications 2022年1期

    Eléonore Roussel,Christophe Szwaj,Clément Evain,Bernd Steffen,Christopher Gerth,Bahram Jalali and Serge Bielawski?

    1Univ.Lille,CNRS,UMR 8523 - PhLAM - Physique des Lasers,Atomes et Molécules,Centre d’étude Recherches et Applications (CERLA),F-59000 Lille,France

    2DESY (Deutsches Elektronen-Synchrotron),Notkestr.85,D-22607 Hamburg,Germany

    Abstract Recording electric field evolution in single-shot with THz bandwidth is needed in science including spectroscopy,plasmas,biology,chemistry,Free-Electron Lasers,accelerators,and material inspection.However,the potential application range depends on the possibility to achieve sub-picosecond resolution over a long time window,which is a largely open problem for single-shot techniques.To solve this problem,we present a new conceptual approach for the so-called spectral decoding technique,where a chirped laser pulse interacts with a THz signal in a Pockels crystal,and is analyzed using a grating optical spectrum analyzer.By borrowing mathematical concepts from photonic time stretch theory and radio-frequency communication,we deduce a novel dual-output electro-optic sampling system,for which the input THz signal can be numerically retrieved-with unprecedented resolution-using the so-called phase diversity technique.We show numerically and experimentally that this approach enables the recording of THz waveforms in single-shot over much longer durations and/or higher bandwidth than previous spectral decoding techniques.We present and test the proposed DEOS (Diversity Electro-Optic Sampling) design for recording 1.5 THz bandwidth THz pulses,over 20 ps duration,in single-shot.Then we demonstrate the potential of DEOS in accelerator physics by recording,in two successive shots,the shape of 200 fs RMS relativistic electron bunches at European X-FEL,over 10 ps recording windows.The designs presented here can be used directly for accelerator diagnostics,characterization of THz sources,and single-shot Time-Domain Spectroscopy.

    Introduction

    Recording the complete electric field of light in singleshot(including its envelope and carrier)is considered one of the “holy grails” of terahertz science.This type of detection is largely needed for investigating and mastering novel terahertz sources,as ultrashort pulse quantum cascade lasers1,ultra-wide bandwidth laser-plasma-based terahertz sources2,and terahertz Free-Electron-Lasers3.Such tools are also crucial for mastering novel “extreme photonic infrastuctures”,such as X-ray Free-Electron Lasers4,and in the very active field of Laser-Plasma Acceleration (LPA)5,which has the ambition to replace large accelerators facilities by table-top installations.Single-shot terahertz recorders are also needed in applications,such as spectroscopy,using high power THz sources.In this case,the low repetition rate of the sources makes traditional methods of time-domain spectroscopy(TDS)(based on scanning the delay between a probe laser and the THz signal under interest) largely impractical.

    However recording a complete terahertz wave in singleshot is a largely open problem,when a large bandwidth and long record duration are simultaneously needed.Promising strategies consist in extending the so-called electro-optic sampling technique6to the single-shot case.A popular strategy consists of imprinting the electric field evolution onto a chirped laser pulse7-9,and recording the optical spectrum using a grating-based optical spectrum analyzer(OSA),as displayed in Fig.1a.This method is now usually known asspectral encodingorspectral decoding.

    The initial idea7has been based on the assumption that—because the THz signal is imprinted onto the time-evolution of a chirped laser pulse—we can expect the THz signal shape to appear,with a good fidelity,in the output optical spectrum.However,it was shown that this idea works only if the needed temporal resolution is larger than8:

    whereτwis the duration of the chirped pulse on the crystal,andτLis the Fourier-transform limit duration(i.e.,the pulse duration that may be reached when fully compressed).

    It is important to note that this limitation is much more drastic than a simple “blurring effect”.When time evolutions faster thanτRare present in the THz signal,the output signal is typically a very deformed version of the input signal,as displayed in Fig.1c.Moreover,the limitation set by Eq.1 dramatically worsens when the desired analysis window duration increases (see Fig.1d).As a concrete example,in a situation where a recording duration of 10 ps is required,and a 100 fs laser is available,the resolutionτRwould be limited to 1 ps.More generally this limitation implies that the resolutionτRwill be much larger than the initial pulse durationτL,this issue being worse as the desired analysis windowτwincreases.

    Fig.1 Principle and limitations of classical single-shot THz waveform recorders using time-to-spectrum conversion(also known as spectral decoding).

    This major issue has been the subject of active investigations during the last two decades.Deconvolution algorithms have only led to limited improvements10,11,and most research switched to alternate hardware strategies,such as encoding the information onto the transverse or angular direction12-16,or combining spectrally decoded electro-optic sampling with advanced laser pulse characterization techniques (such as FROG)17,18.This led to improvements of the temporal resolution.However,these complex designs introduce new trade-offs between sensitivity,maximum recording duration,temporal resolution,and repetition rate.

    Here we show that it is possible to considerably increase the temporal resolution ofspectral decodingmeasurement systems by using a new approach that we call Diversity Electro-Optic Sampling(DEOS).This modification allows us to “break” the previous fundamental barrier displayed by Eq.1,and reach sub-picosecond resolution without fundamental limitation on the window of analysis.Key to our approach is a completely new conceptual approach of spectrally decoded electro-optic sampling,which has its roots in the theory of thephotonic time-stretch analog-todigital converter19,20where a similar problem called dispersion penalty was identified and solved21.As we will see,this point of view provides a way to remove the temporal resolution limit by using a technique known asphase diversity21,and which makes use of a dual-output electro-optic sampling system.Note that the name phase diversity comes from its use in time stretch systems and pays homage to antenna diversity,a technique that eliminates the transmission fading produced by multipath interference,by using several transmission channels (i.e.,several antenna).

    We describe the DEOS technique and validate it on two very different experimental applications.First,we show how to achieve phase diversity utilizing polarization modulation in an electro-optic crystal and demonstrate single-shot recording of THz pulses in a table-top environment.This provides an experimental validation of the method,as well as the building blocks of a novel “singleshot TDS” system.Second,we demonstrate the DEOS approach in an electron accelerator,by probing the Coulomb-field of electron bunches at megahertz repetition rates,at the European X-ray Free-Electron Laser4(EuXFEL).This experiment achieved sub-200 fs resolution over a time window in the 10 ps range.

    Results

    DEOS single-shot recorder:experimental technique and novel theoretical framework

    Our experimental method is displayed in Fig.2a.DEOS is based on chirped pulse electro-optic sampling,with a readout that uses a grating spectrometer7,8,22-27,but with crucial modifications that remove the temporal resolution limitation.The electric field under testE(t) is imprinted in single-shot onto the intensity and phase of a chirped laser pulse.If we assume a linear chirp,the optical angular frequency at the spectrometerωoptis related to the input timetby:

    whereC=?ωopt/?tis the laser chirp rate.

    A key innovation in DEOS is how to achieve phase diversity in polarization-based electro-optic modulation.To do so,we record the optical spectra in single-shot at the two polarizer outputs,and the two optical spectra provide the input data of our retrieval algorithm.The optical spectra are first passed through a pre-processing pipeline that consists of subtraction,amplitude scaling,and optical wavelength to time conversion(see“Materials and methods”).These signalsY1(t) andY2(t) will be named the EO (electro-optic) signals in what follows.Examples of EO signals are displayed in Fig.2b.A key feature of the DEOS method that creates diversity is the special arrangement of the crystal,waveplates,and polarizations (see Table 1),which leads todiversity in frequency responseon the two output channels.This diversity will enable a retrieval of the input terahertz signal using the maximum ratio combining21,28.

    At first glance,it may not be obvious how the two output channels exiting the polarizing beam-splitter achieve phase diversity.While the two outputs may appear to carry the same information,as displayed in Table 1,thephasemodulations will be different.Thisphase diversityphenomenon21will thus lead to the two OSA channels to have complementary null behavior (see Fig.2).We will see below that the combined information inY1(t)andY2(t)will eliminate the nulls in the frequency response and hence overcome the fundamental bandwidth limitation.

    Theoretical framework for Phase Diversity

    In this section we derive the relation between the inputE(t) and the outputsY1(t) andY2(t) measured by the single-shot grating-based OSA.After a relatively nontrivial calculation (see Supplementary Material,Sections V,VI),it can be shown that,in Fourier domain,the input and outputs are related by remarkably simple analytic expressions involvingtransfer functions H1andH2:

    where the tilde denotes the Fourier transform,and Ω is the terahertz angular frequency at the input.Δ?in(t)is the optical phase shift induced by the THz fieldE(t) in the crystal birefringence:

    wheren0is the refractive index at vanishing electric field,dis the thickness of the crystal andr41is the electro-optic coefficient.λis the laser wavelength in vacuum andE(t) the electric field inside the crystal.The transfer function approach is valid for small values of Δ?in(t).

    For the specific DEOS design described in Fig.2a and Table 1,the corresponding transfer functions can be written as (see Supplementary Material,Section VI):

    As a first observation,the transfer functionsH1(Ω) andH2(Ω)present nulls at specific frequencies(Fig.2c).These nulls limit the temporal resolution and the loss of signal at or near the null frequencies cannot be reversed by deconvolution(i.e.,to retrieve the input fieldE(t)from the recorded data).This theoretical result on the existence of nulls is consistent with previous experimental observations29,30,and ours,as we will see below.Conceptually,these nulls correspond to the dispersion penalty phenomenon observed in the photonic time-stretch digitizer21,as shown in Supplementary Material,Sections VB and VIA.

    With the deep insight gained from the theoretical analysis above,we can recover the input signal Δ?in(t) andE(t)by exploiting the information contained in both output channels becauseH1(Ω) andH2(Ω) are complementary(diverse).In this respect,it is important to note that the relative positions of the zeros(nulls)depend on the crystal orientations.For instance,the polarization orientations used traditionally([-110]axis parallel to the terahertz field—see Table 1 and in Fig.1)would not work,as this would lead to nulls ofH1,2that occur at the same frequencies(see Supplementary Fig.S4).In addition,the polarization arrangement considered in this article—for which the zeros are complementary—is only one of many possible choices which are compatible with the following retrieval algorithm.

    Table 1 Differences in crystal and waveplates orientations between classic spectrally decoded EO sampling(Fig.1)and the new phase diversity (DEOS) system (Fig.2).

    Maximal ratio combining (MRC) algorithm for signal reconstruction

    As the zeros (nulls) of the transfer functions are interleaved,we can retrieve the unknown THz electric field from the recorded data.The mathematical problem is well-posed,and even overdetermined,i.e.,one has the freedom to chose eitherH1orH2for inverting the problem,except at the nulls for which both channels must be used.Several advanced methods exist for the reconstruction process.Here we use the so-called MRC technique21,28,which is designed for optimizing the signal-tonoise ratio (SNR).The input signal can be retrieved from the measurementsY1,2as21:

    Note that the theoretical transfer function of DEOS,defined from the input THz-induced crystal phase-shift(Ω) to the reconstructed signal(Ω) is—by design—perfectly flat.This can be easily verified by injecting the definitions of the single channel transfer functions (Eqs.3,4) in the MRC reconstruction Eq.10.One easily finds:

    or,after an inverse Fourier transform:

    This implies that any sharp input temporal feature Δ?in(t)with bandwidth Ωmaxshould now be retrieved without distortion,provided the corresponding input data(Ω)andY2(Ω) can be obtained with reasonable SNR,up to Ωmax.

    We tested this reconstruction method numerically for various parameters,and found that it is possible to retrieve the input pulse for arbitrarily long input chirped pulses(i.e.,for any duration of the analysis window),down to terahertz pulse durations of the order of the Fourierlimited pulse duration (see “Discussion”,Suplementary Material,Section VIII).An example of retrieved input pulse is presented in Fig.2d.

    Experimental demonstration:recording free-propagating terahertz pulses with large time-bandwidth products

    In order to test the DEOS method experimentally,we first constructed the setup displayed in Fig.3a.Terahertz pulses are produced by optical rectification of 800 nm millijoule-range laser pulses in a Zinc Telluride (ZnTe)crystal.These terahertz pulses are then analyzed by an EO sampling setup based on our design.

    Fig.3 Single-shot recording of free-propagating terahertz pulses over a window of the order of 20 ps.

    For test purposes,we also designed the setup so that it is possible to skip or operate the grating stretcher,without changing the setup alignment.We can thus analyze the terahertz pulses using either single-shot “realtime” EO sampling (i.e.,using chirped pulses) or using the traditional “equivalent-time” EO sampling by scanning the delay between the femtosecond laser pulses and the terahertz signal.We will thus test our single-shot method by comparing the DEOS results to the corresponding scanned EO signals.

    A typical result is presented in Fig.3e,using a time window of 20 ps.The reconstructed EO signal and the reference EO signal (i.e.,obtained using scanned electro-optic sampling) are found to be extremely similar in shape.The reconstruction is even able to reproduce fine details,as the small oscillations between 5 and 20 ps,which are due to the water vapor absorption in air (free-induction decay),and multiple reflections on the Silicon plate.For comparison,the EO signal shapesY1,2before reconstruction (i.e.,corresponding to the previous state-of-art)are very different from the input,as can be seen in Fig.3c,d.

    These results confirm that the DEOS method now enables investigations of terahertz sources,as well as TDS to be achieved in single-shot,with simultaneously high temporal and spectral resolution.More precisely the time resolution and bandwidth limit of the DEOS method appear—as theoretically expected—similar to classical(and non-single-shot) “scanned” electro-optic sampling.

    Note:determination of the reconstruction parameter

    As this type of reconstruction requires the knowledge of the transfer functionsH1,2,it is important to find a practically convenient approach for determining the parameterB.We remarked thatBcan be determined in a very simple way,by analyzing the recorded data corresponding to the unknown signal.From the reconstructed signal(t),we can simulate the corresponding DEOS signals(Ω) and(Ω):

    whereH1,2,and(Ω) depend onB.

    Then we can perform a least-square fit ofandonand,usingBas a free parameter.Here,we perform a classical least-square fit using the following definition for the reconstruction error ?:

    Besides its use for checking the fit quality,it is interesting to examine the reconstructedand rawEO signals(Fig.4).Those curves clearly display the nulls that stem from the zeros of the transfer functionH1,2expressed in Eqs.(7,8).

    Fig.4 Fit providing the reconstruction parameter B from a single-shot recording.

    Remarkably,this result shows that the determination of the fit parameterBdoes not require specific experiments to be performed.The fit can be made using any unknown input signal—including the signal to be analyzed—provided its bandwidth is sufficient.

    Application to measurements of relativistic electron bunch shapes at the European X-ray free-electron laser

    The high resolution retrieval based on phase diversity is expected to find immediate applications in single-pass Free-Electron Lasers (FELs),such as EuXFEL4.FELs are based on self-amplification of stimulated radiation driven by ultra-short relativistic electron bunches with high peak current propagating in a periodic magnetic field (undulators).They provide femtosecond photon pulses with energies in the millijoule range,and wavelengths ranging from the ultraviolet to hard X-rays depending on the facilities.The emitted photon pulses depend directly on the properties of the electron bunches.Hence the diagnostics of their longitudinal shape has been the subject of an intense research in the last years22,31-34.

    A well-known and efficient way to measure the shape of a high energy electron bunch consists of probing its Coulomb field,at a short distanceD.The fundamental time-resolution limit of such a measurement is directly determined by the Coulomb field distribution of a single electron in the laboratory frame (see,e.g.,ref.35).The resulting resolution limit is of the order of9,36:

    withγthe Lorentz contraction factor,andcthe speed of light.For energies in the GeV range(i.e.,γof the order of several thousands for electrons) and a distanceDof few millimeters,this time resolution limitlies in the few tens of fs or even below.

    As a result,in high energy machines,the main resolution limit is actually set by the capabilities of state-of-art single-shot photonic measurement systems.In particular,Eq.1 strongly hampered the application range of classical spectrally-decoded electro-optic sampling to values well above the limit set by Eq.17.The situation is also complicated by the recent trend forward repetition rates in the megahertz-range,in X-ray FELs based on superconducting technology such as FLASH37,EuXFEL4,and the LCLS-II38and SHINE39projects.

    In order to test our DEOS reconstruction technique in this context,we realized a proof-of-principle phasediversity setup at the EuXFEL (Fig.5a),which is the first hard X-ray FEL operating at megahertz repetition rate4(see also refs.40,41for examples of applications).In the present case,electron bunches are generated at 1.3 MHz rate in 600 μs long bursts,every 100 ms (Fig.5b).

    Fig.5 Electron bunch shapes recorded at the European X-ray Free-Electron Laser (EuXFEL).

    The setup,based on the single EO channel detection34,is depicted schematically in Fig.6.The EO setup,destined to record the Coulomb field versus time,is located just after the second bunch compressor,where the electron bunches have a beam energy of 700 MeV and a typical RMS duration in the 200 fs range at a charge of 250 pC.The distanceDbetween the laser and the electron bunch is of the order of 5 mm which corresponds to a time resolution limitin the 30 fs range for the measurement of the Coulomb field.Note that,in contrast to the previous experiment,where real single-shot operation was achieved,we had here to record each polarization channelsuccessively,due to the lack of a second MHz line rate spectrometer (see “Materials and methods”).Hence the present proof-of-principle experiment is not singleshot for the moment.However,a relatively obvious upgrade is planned in order to achieve simultaneous recordings of the two channels.

    Fig.6 DEOS measurement of the Coulomb field created by relativistic electron bunches at the European X-ray Free-Electron Laser (Eu-XFEL).

    Results are displayed in Fig.5c,d.Figure 5c depicts the raw EO signals (after background subtraction and normalization),and Fig.5d represents the reconstructed electric field.We observe a main peak,for which the duration of 218 fs (RMS) is in very good agreement with the design value of the electron bunch duration at this location and considerably shorter than measured with conventional spectrally decoded EO sampling at the same setup34.The smaller negative peak can be attributed to a wakefield following the electron bunch,but the precise interpretation will be the subject of further investigations.Typical examples are displayed in Fig.5e,f.This measurement system can now be used to perform bunch-bybunch high resolution measurements of the bunch shape which is crucial information for the control of the bunch compression process.

    As previous spectrally decoded EO systems,DEOS also simultaneously measures the arrival time of the electron bunch,which is also a crucial parameter for users of the generated X-rays.The resolution of DEOS for this measurement is expected to be similar to standard EO sampling.In the present case,the arrival time jitter(Fig.5g)is measured to be 58 fs over a bunch train,which is much lower than the bunch duration (218 fs RMS),and consistent with ref.34.

    From the hardware point of view,it is important to note that only few key modifications of our initial EO system34were needed:ensuring a proper (non-standard) orientation of the GaP crystal in the vacuum chamber,and simultaneous detection of the two EO output channels.We thus think that the implementation of a double EO output channel readout will permit to relatively easily adopt the phase diversity-based retrieval method in existing or planned EO diagnostics at FELs or other accelerators.

    Discussion

    It is important to note that DEOS is fundamentally different from previous techniques aiming at retrieving the input field using numerical analysis of the EO data(deconvolution11,and holography-inspired reconstructions10).The presence of zeros (nulls) in the transfer functionsH1(Ω) andH2(Ω) limits the success of reconstruction methods that do not use the phase diversity technique to relatively narrowband signals,or short analysis windows,if there is no a priori information on properties of the solution.More precisely,deconvolutions or reconstructions from a single channel is ill-posed when the signal spectrum Ωmaxexceeds the angular frequency Ω0of the first null:or(depending on the channel used) for the Fig.2 setup.The limit isfor the case of the more classical situation for which the [-110] axis is parallel to the terahertz field (see Section V of Supplementary Material for the corresponding transfer functions).

    In contrast,the DEOS strategy allows a numerical reconstruction to be possible on a frequency range that extends well above the nulls ofH1andH2.After applying the MRC algorithm,the resulting transfer function is flat—by design—as shown in Eq.12.In consequence,DEOS enhances the effective bandwidth over which a THz signal can be reliably recorded without distortion.In practice,the ultimate temporal resolutionis hence conjectured to be limited by either (1) the laser pulse bandwidth ΔνL,or(2)the bandwidth Δνcrystalof the EO crystal,whichever is slower.Bandwidth limitations by the electrooptic crystal have been previously extensively studied,and will not be discussed here.The main limitations comes from the phase-matching (i.e.,the crystal thickness) and phonon absorption lines,which are at 5.3,8.0,and 11 THz for classical Zincblende crystals ZnTe,GaAs,and GaP33,respectively.Note that the crystal speed limitation affects the response of the Pockels crystal phase shift Δ?(t) with respect to the input electric fieldETHz(t).

    DEOS specifically enhances the bandwidth and time resolution of the next part of the system,i.e.,from the crystal’s output phase shift Δ?in(t) to the final (retrieved)EO signal(t).It is hence natural to introduce a figure of merit that relates the available laser bandwidth(which is a fundamental limitation to the measurement)and the corresponding resolution limitation:

    In this Fourier reciprocal relation,the introduced figure of meritηLhas the meaning of a time-bandwidth product.Systematic studies of the resolution versus available laser bandwidth will require specific research,for instance in order to find an analytic bound toηL.However,the resolutioncan already be easily computed numerically in simple cases.As an example,in Table 2 and in Section VIII of the Supplementary Material,we present such a preliminary study in the case of the Eu-XFEL experiment.In this case (and with all widths being defined FWHM) we find that the figure of meritηLis slightly below unity,and the corresponding time resolution limit (for measuring a Gaussian THz pulse) is approximately 2.2 times the laser pulse duration (see Table 2).

    In this work,it is interesting to note that,even though DEOS could straighforwardly beat the historical limit set by Eq.1,we did not have the possibility to produce THz signals presenting features short enough to test the“new”ultimate limit set by the laser bandwidth(Eq.18),nor the crystal bandwidth limitation.Even in the FEL experiment,the shortest features we could resolve were the bunch shape itself,which has an RMS duration in the 200 fs range,whereas the resolution limit set by the laser bandwidth is numerically predicted (see Table 2) to be less than 100 fs FWHM.

    Table 2 Example of expected time resolution limitation(numerical simulation)due to the finite laser bandwidth(i.e.,an infinitely fast crystal is assumed).

    Besides,another equally important property of DEOS lies in the possibility to considerably extend the duration of the analysis windowτw,while keeping the bandwidth of analysis(or time resolution)constant.This is important in particular for time-domain spectrometers (as the one presented in Fig.3),since the spectral resolution is directly determined by 1/τw.A long recording window is also crucial in studies of the dynamics of various sources,as THz Free-Electron lasers3,Coherent Synchrotron Radiation sources42,and quantum cascade lasers1.The achievable analysis windowτwof DEOS is no longer limited by Eq.1,and this represents a considerable advantage with respect to standard electro-optic sampling.While this suggests that the window of analysisτw,can be chosen arbitrarily large,component limitations will restrict its achievable range.The most obvious one is the number of pixelsNcamof the camera that resolves the optical spectrum (1280 and 256 for the first and second experiments of this article).This sets an upper limit to the“effective number of points” that can be recorded to

    Technically,the effective number of points will be also affected by the well-know spectrometer resolution parameters,in particular the number of grating lines that diffracts the laser beam,and aberrations.This will not be discussed here as this does not represent a fundamental limit,and is a well-documented topic.However,when needed,care will have to be taken in the spectrometer choice for reaching an effective number of pointNeffclose to the camera resolution.If applications require an effective number of pointsNeffbeyond camera capabilities,different ways may be possible for recording the spectrum.A foreseen alternative is the so-called Dispersive Fourier transform43,which may be advantageous from this point of view.This would turn the present recording system to a photonic time-stretch data acquisition system19,44.

    Future work aiming at reaching the highest bandwidths and/or longest record duration will probably require specific studies,in particular for managing higher-order dispersion.Indeed,DEOS theory has been established assuming quadratic probe laser chirp,and unwanted third-order dispersion will lead to loss of quality in the reconstruction.It is important to note that the present method implies a fit (see Fig.4) that also provides an objective measurement of the quality of the modelexperiment correspondence.Specific works will be needed when this fit will present strong errors,and this will be expected in extreme cases where strong third-order dispersion is present and the transfer functionsH1,2present many lobes over the bandwidth of the THz signal.These particular cases will reduce the bandwidth of the measurement (to the range allowing a reasonably good fit).Therefore,we think that an important research direction will consist of extending the DEOS theory in order to take third-order dispersion into account in the reconstruction.

    Finally,interesting future directions also concern the quest for the highest possible sensitivity for single-shot DEOS.In this respect,note that the SNR depends on the location inside the laser spectrum,and constant SNR should be achievable by flattening the probe laser spectrum using Fiber Bragg Gratings-based or programmable optical filters (such as the so-called Waveshaper).Furthermore,DEOS is compatible with the recent SNRenhancement strategies,which has been developed for electro-optic sampling45.

    In conclusion,we present a novel conceptual framework for spectrally decoded electro-optic sampling,that solves the“temporal resolution problem”open about 20 years ago for terahertz recorders.Technically,the key lies in the derivation of the transfer function,which—in turn—allows well-posed reconstruction algorithms to be possible.In practice,the resulting DEOS design opens the way to terahertz digitizers whose recording length and resolutions is only limited by the probe crystal speed or the laser uncompressed pulse duration.On the short term,one foreseen application of DEOS concerns a revisit of high repetition-rate TDS,up to megahertz rates,and consider monitoring irreversible physical and chemical processes.Another foreseen application is totally opposite,and concerns the applications of very low repetition rate terahertz sources,for which scanning strategies are impractical.This concerns nonlinear TDS using accelerator-based3,46,47,as well as table-top-based high power terahertz sources48.Future work will include a systematic experimental study of the new limits set by the method in terms of ultimate resolution,time-window,and repetition rate.In this respect,an important direction will consist in combining the present DEOS terahertz recording method with photonic timestretch19,42,49,as this should theoretically allow repetition rate to reach the hundred of megahertz range.

    Materials and methods

    Theoretical details

    Proofs are given in the Supplementary Material,and we recall only the main results here.The Pockels-induced phase-shift Δ?in(t) is related to the terahertz electric field by Δ?in(t)=βE(t)(see Eqs.7,8).The factorβdepends on the relative orientations of the crystal axes and on the polarizations of the laser and terahertz field.For the phase-diversity scheme of Fig.2 and the setups considered in the main text:

    wheren0is the refractive index at vanishing electric field,dthe thickness of the crystal andr41is its electro-optic coefficient.λis the laser wavelength in vacuum andE(t)the electric field inside the crystal.See Supplementary Material Section VIII for the values used in the numerical simulations.Note that the value ofβis two times smaller than for the usual approach used in classical balanced detection(see Eqs.30 and 49 of the Supplementary Material).

    Experimental recording system for the table-top experiment (Fig.3)

    The laser pulses are delivered by an amplified Sapphire-Titanium laser (Coherent Astrella) with 40 fs duration and 7 mJ output,from which 3 mJ are extracted for this experiment.The emission and detection ZnTe crystals are 110-cut,with 1 mm thickness,and the component orientations are displayed in Table 1.The stretcher is a classical Treacy compressor.The Silicon filter (280μm thick,at normal incidence) is destined to reject the 800 nm laser light.The imaging spectrometer is composed of a reflection grating (Thorlabs,1200 lines/mm,blazed at 750 nm),a low-cost 1280×1024 pixels monochrome CMOS camera (UI 3240 ML NIR from IDS GmbH)equipped with a 60 mm objective (Nikkor 60 mm F2.8G ED).We also place a cylindrical lens with 100 mm focal length just before the 60 mm lens,in order to spread vertically the optical power onto the CMOS camera.The three spots are vertically binned at analysis stage,thus increasing the equivalent full-well capacity(and the SNR).

    At each shotn,the recorded image (see Fig.3b) provides three raw data:the spectra on the two polarization channelsS1n(λ) andS2n(λ) (containing the information on the terahertz field),and the spectrum of the unmodulated laserS0n(λ).The camera is trigged by the laser,and acquires 10 images per second.In order to ensure single-shot measurements,we systematically chose a camera exposure time that was shorter than the laser repetition period of 1 ms(the exposure time was 25μs for the data presented here).

    For this test,we did not try to achieve 1 kHz repetition rate (i.e.,the repetition rate of the laser),although this type of upgrade would be straightforward using a state-ofart commercial CMOS or CCD camera(as,e.g.,in ref.50).

    Data analysis in the table-top experiment

    Raw experimental data consist of single-shot camera images(Fig.3b).At each shotn,we extract the three spots:the upper and lower spot corresponding to the EO signals along the two polarizations 1 and 2,and the central spot,which corresponds to the reference laser spectrum without electric field.This latter is used for correcting the shot-toshot fluctuations of the laser.The three corresponding spectrum are extracted and provide 1-dimensional arraysS1n[i],S2n[i] andS0n[i] (withi=0..1279 corresponding to the horizontal camera row index,and physisally to the wavelengthλ).In addition,we also record beforehand the same data in absence of electric field,which provides the three arrays[i] and[i] and[i].

    For obtaining the EO signalsY1nandY2nat each shotn(displayed in Fig.2b) in the following way.We first apply the background subtraction and normalization:

    Afterwards,we discard the low-SNR data which correspond to the low intensity wings of the laser spectrum,by multiplying the data by a window functionW.

    In the experimental results of Fig.3,we used a simple square window,withW[i]=1 for pixels rowsi=300 to 1000,andW[i]=0 elsewhere.

    Note that the first part of the preprocessing (22,23)involves a measurement of the laser spectrumS0n,so that shot-to-shot laser spectrum fluctuations are canceled out.In other words,Y1,2ndo not depend on the shape ofS0n.This can be shown easily,if we assume a fixed relation between the three spectra:S0,1,2n(λ)=f0,1,2(λ)SLn(λ),withSLn(λ) the laser spectrum at shotn,and assume thatf0,1,2(λ) are functions that do not change with time (i.e.,they only are determined by the optics transmisions,and adjustment).This preprocessing should theoretically allow the measurements to reach the shot-noise limit.

    The obtainedY1,2nare then used in the MRC retrieval algorithm.Then:

    ● We apply a Fast Fourier Transform (FFT) to the windowedY1,2n(t) data.

    ● Apply the MRC formula displayed in Eq.10.

    ● Finally apply and inverse FFT for obtaining the reconstructed data(t) and(t).

    Other option for the reconstruction

    Note that the data processing may be performed in another order.Instead of first applying the background subtraction and normalization (22,23) before the MRC algorithm,we can also first apply the background subtraction,then MRC,and eventually the normalization.The results are extremely similar for all the experiments presented in this article (see Supplementary Material Section VIII for a reconstruction using this order).

    Experimental setup at EuXFEL (Fig.6)

    The probe pulses are delivered by an amplified Ytterbium fiber laser operating at 1030 nm.The EO effect is achieved in a Gallium Phosphide(GaP)crystal with 2 mm thickness,which is placed inside the vacuum chamber of the accelerator,near the electron beam34.The current setup permits to detect only one EO channel output at a time,because one readout camera is available at the time.The spectra are recorded in single-shot,using a grating spectrometer based on the KALYPSO fast linear array detector51,52operated at a line rate of 1.13 MHz.A first series of electron bunch trains for one polarization is recorded and then the last half-wave plate before the polarizing beam splitter is rotated byπ/8 to record the complementary polarization.Hence,the two EO channel outputs can be used to reconstruct the individual electron bunch shapes within the burst using the phase-diversity technique.Note that a straightforward upgrade is also planned,with the aim to achieve simultaneous recording of both polarisations,and realize true single-shot operation.

    Data analysis in the EuXFEL experiment

    With each burst,we record single-shot spectra on one of the two polarization directionsS1n(λ),S2n(λ)and additionally unmodulated spectra with laser and no electron bunch,and the spectra without laser.

    However as we do not record the unmodulated laser spectraS0n(λ) of the same laser pulses in the XFEL experiment,we cannot compensate for the shot-to-shot fluctuations of the laser faster than about 2 kHz.The data analysis is then similar to the 800 nm experiment case.We thus define the EO signals (before applying the MRC reconstruction) as:

    And as before,we multiply the data by a window function(see Eq.24):

    We chose here a Tukey function forW[i],which falls to zero at the points where the laser spectrum is at 5% of its maximum,and with a shape parameter equal to 0.25.Then we apply the MRC algorithm in exactly the same way than for the previously described table-top experiment.

    Acknowledgements

    The PhLAM team was supported by the following funds:Ministry of Higher Education and Research,Nord-Pas de Calais Regional Council and European Regional Development Fund (ERDF) through the Contrat de Plan état-Région(CPER photonics for society),LABEX CEMPI project (ANR-11-LABX-0 007),and the ANR-DFG ULTRASYNC project (ANR-19-CE30-0031).E.R.was supported by the METEOR CNRS MOMENTUM grant.B.S.and C.G.acknowledge support from DESY,a member of the Helmholtz Association HGF.B.J.(UCLA) was supported by the Office of Naval Research (ONR) Multi-disciplinary University Research Initiatives(MURI) program on Optical Computing Award Number N00014-14-1-0505.This work also used the PhLAM femtosecond laser facility in 2016 and 2017.The authors would like to thank Marc Le Parquier and Nunzia Savoia(PhLAM)for their work on the operation of the Titanium-Sapphire laser.

    Author details

    1Univ.Lille,CNRS,UMR 8523 - PhLAM - Physique des Lasers,Atomes et Molécules,Centre d’étude Recherches et Applications (CERLA),F-59000 Lille,France.2DESY (Deutsches Elektronen-Synchrotron),Notkestr.85,D-22607 Hamburg,Germany.3Electrical and Computer Engineering Department,University of California,Los Angeles,420 Westwood Plaza,90095 Los Angeles,CA,USA

    Author contributions

    The PhLAM team realized the theoretical and numerical investigations:establishment of the transfer functions versus crystal arrangement,analysis algorithm based on MRC,and simulation codes.These investigations have been based on the concepts established by UCLA (B.J.) on transfer functions,phase diversity and MRC,in the framework of photonic time-stretch.Theoretical and numerical calculations have been performed by S.B.and E.R.Table-top experiments have been designed and realized and operated by C.S.,E.R.,C.E.,and S.B.The EuXFEL DEOS system has been designed and realized by B.S.and C.G.The setup modifications for phase-diversity studies at EuXFEL have been designed by the PhLAM and DESY teams,and realized by B.S.Data analysis has been performed by E.R.and S.B.(table-top experiments),and E.R.,B.S.,C.S.,and S.B.(FEL experiments).All authors participated to the manuscript redaction.

    Conflict of interest

    The authors declare no conflict of interests.

    Supplementary informationThe online version contains supplementary material available at https://doi.org/10.1038/s41377-021-00696-2.

    免费看a级黄色片| 黄频高清免费视频| 99riav亚洲国产免费| 亚洲 欧美一区二区三区| 欧美人与性动交α欧美精品济南到| 窝窝影院91人妻| 久久香蕉国产精品| 国产麻豆69| 国产成年人精品一区二区| 男人操女人黄网站| 一二三四在线观看免费中文在| 电影成人av| 97人妻天天添夜夜摸| 色综合站精品国产| 国产一区二区三区综合在线观看| 久久人人爽av亚洲精品天堂| 免费看十八禁软件| 国产亚洲av高清不卡| 亚洲精品中文字幕在线视频| 国产亚洲欧美在线一区二区| 久久香蕉激情| www.精华液| 他把我摸到了高潮在线观看| 亚洲国产高清在线一区二区三 | 国产在线精品亚洲第一网站| 色综合婷婷激情| 中文字幕另类日韩欧美亚洲嫩草| 亚洲情色 制服丝袜| 99在线人妻在线中文字幕| 国产欧美日韩一区二区三区在线| 久久久久精品国产欧美久久久| 亚洲精品国产色婷婷电影| 少妇熟女aⅴ在线视频| 十八禁人妻一区二区| 精品午夜福利视频在线观看一区| 精品人妻1区二区| 成年版毛片免费区| 99国产综合亚洲精品| 亚洲免费av在线视频| 国产成人免费无遮挡视频| 日韩欧美免费精品| 亚洲天堂国产精品一区在线| 在线天堂中文资源库| 国产成人av教育| 国产成+人综合+亚洲专区| 日本免费a在线| 中文字幕人妻熟女乱码| 国产一区二区三区在线臀色熟女| www日本在线高清视频| 91成人精品电影| 色播亚洲综合网| 老司机福利观看| 男男h啪啪无遮挡| 久久精品人人爽人人爽视色| 国产一区二区三区视频了| 精品久久蜜臀av无| 曰老女人黄片| 国产成人精品久久二区二区91| 国产精品亚洲美女久久久| 看黄色毛片网站| 侵犯人妻中文字幕一二三四区| 色老头精品视频在线观看| 91大片在线观看| 久久香蕉国产精品| 国产1区2区3区精品| 黑丝袜美女国产一区| 岛国在线观看网站| 女生性感内裤真人,穿戴方法视频| 欧美日韩一级在线毛片| 免费看a级黄色片| 人妻久久中文字幕网| 久久香蕉国产精品| 怎么达到女性高潮| 亚洲欧美日韩无卡精品| 欧美成人免费av一区二区三区| 变态另类丝袜制服| 国产精品乱码一区二三区的特点 | 两性夫妻黄色片| 久久国产乱子伦精品免费另类| 在线播放国产精品三级| 亚洲精品美女久久av网站| 女人精品久久久久毛片| 免费av毛片视频| 国产麻豆成人av免费视频| 久久精品国产亚洲av高清一级| 久久精品aⅴ一区二区三区四区| 亚洲第一电影网av| 999久久久国产精品视频| 欧美日韩福利视频一区二区| 美女大奶头视频| 高潮久久久久久久久久久不卡| 午夜福利在线观看吧| 亚洲 欧美 日韩 在线 免费| 老司机福利观看| 美女免费视频网站| 操美女的视频在线观看| 亚洲熟妇中文字幕五十中出| 天天一区二区日本电影三级 | 日本黄色视频三级网站网址| 女人被狂操c到高潮| av天堂久久9| 精品第一国产精品| 欧美日韩瑟瑟在线播放| 岛国在线观看网站| 日本黄色视频三级网站网址| 亚洲电影在线观看av| 亚洲国产中文字幕在线视频| √禁漫天堂资源中文www| 免费在线观看日本一区| 丝袜人妻中文字幕| 午夜精品在线福利| 中文字幕人妻丝袜一区二区| videosex国产| 欧美午夜高清在线| 亚洲人成网站在线播放欧美日韩| 精品久久久精品久久久| 精品国内亚洲2022精品成人| 美女 人体艺术 gogo| 如日韩欧美国产精品一区二区三区| 精品午夜福利视频在线观看一区| 精品国产一区二区久久| 又大又爽又粗| 黄片大片在线免费观看| 亚洲av电影在线进入| 国产激情久久老熟女| 桃红色精品国产亚洲av| 亚洲精华国产精华精| 亚洲,欧美精品.| 国产精品久久久av美女十八| 国产一级毛片七仙女欲春2 | 国产三级在线视频| 欧美激情久久久久久爽电影 | 亚洲成人精品中文字幕电影| 久久久久久免费高清国产稀缺| 亚洲av片天天在线观看| 在线国产一区二区在线| 欧美性长视频在线观看| 黄片播放在线免费| 国产av一区在线观看免费| 午夜福利视频1000在线观看 | 99久久综合精品五月天人人| 99热只有精品国产| 欧美老熟妇乱子伦牲交| 日本精品一区二区三区蜜桃| av电影中文网址| 亚洲av电影不卡..在线观看| 在线观看免费日韩欧美大片| 亚洲久久久国产精品| 亚洲欧美日韩无卡精品| 日本五十路高清| 黑人操中国人逼视频| 18禁黄网站禁片午夜丰满| 视频在线观看一区二区三区| 欧美日本中文国产一区发布| 国产一级毛片七仙女欲春2 | 伦理电影免费视频| 人人妻人人爽人人添夜夜欢视频| 精品一区二区三区视频在线观看免费| 国产99久久九九免费精品| 日本 欧美在线| 嫩草影院精品99| 色在线成人网| 久久亚洲真实| 精品久久久久久,| 韩国av一区二区三区四区| 国产成人一区二区三区免费视频网站| 在线观看午夜福利视频| 午夜激情av网站| 99国产精品99久久久久| netflix在线观看网站| 国产97色在线日韩免费| 日韩欧美免费精品| 国产精品精品国产色婷婷| 国产午夜福利久久久久久| 天堂影院成人在线观看| 两人在一起打扑克的视频| 日韩av在线大香蕉| 精品国产亚洲在线| 女性被躁到高潮视频| 一边摸一边抽搐一进一出视频| 久久影院123| av片东京热男人的天堂| 在线观看免费日韩欧美大片| 久久精品国产亚洲av高清一级| 在线天堂中文资源库| 久久久久久久午夜电影| 亚洲精品国产精品久久久不卡| 欧美一区二区精品小视频在线| 无限看片的www在线观看| 看片在线看免费视频| 国产xxxxx性猛交| 亚洲成人免费电影在线观看| 精品高清国产在线一区| 日韩高清综合在线| АⅤ资源中文在线天堂| 国产欧美日韩一区二区三区在线| 亚洲人成77777在线视频| 国产一卡二卡三卡精品| 久久久精品欧美日韩精品| av视频免费观看在线观看| 亚洲精品中文字幕在线视频| 午夜精品久久久久久毛片777| 日本 欧美在线| 麻豆一二三区av精品| 午夜激情av网站| 欧美亚洲日本最大视频资源| 国产欧美日韩一区二区三区在线| 在线观看免费视频网站a站| 丰满的人妻完整版| 99国产综合亚洲精品| av视频在线观看入口| 久久久水蜜桃国产精品网| 色综合站精品国产| 久久久久九九精品影院| 给我免费播放毛片高清在线观看| 国产精品免费一区二区三区在线| av视频免费观看在线观看| av视频免费观看在线观看| 天天躁狠狠躁夜夜躁狠狠躁| 亚洲熟女毛片儿| 最好的美女福利视频网| 97人妻精品一区二区三区麻豆 | 国产精品亚洲一级av第二区| 久久香蕉精品热| 精品午夜福利视频在线观看一区| 久9热在线精品视频| 一级片免费观看大全| 88av欧美| ponron亚洲| 亚洲色图av天堂| 999久久久国产精品视频| 999精品在线视频| 嫩草影视91久久| 亚洲精品在线观看二区| 国产精品二区激情视频| 波多野结衣高清无吗| 免费一级毛片在线播放高清视频 | 国产精品1区2区在线观看.| 日韩欧美在线二视频| 亚洲人成伊人成综合网2020| 一区二区三区精品91| 日韩av在线大香蕉| 天天添夜夜摸| 男人操女人黄网站| 国产单亲对白刺激| 免费看美女性在线毛片视频| 欧美日本亚洲视频在线播放| 变态另类成人亚洲欧美熟女 | 一区二区三区激情视频| 午夜福利欧美成人| 亚洲av电影不卡..在线观看| 久久热在线av| 午夜激情av网站| 亚洲av美国av| 成年人黄色毛片网站| 亚洲av片天天在线观看| 亚洲午夜精品一区,二区,三区| 99国产精品免费福利视频| 操出白浆在线播放| 人妻丰满熟妇av一区二区三区| 免费看a级黄色片| 久久亚洲真实| 免费搜索国产男女视频| 日本在线视频免费播放| 一区二区三区高清视频在线| 深夜精品福利| 久9热在线精品视频| 一本大道久久a久久精品| 免费少妇av软件| 国产精品日韩av在线免费观看 | 日日摸夜夜添夜夜添小说| 国产午夜福利久久久久久| 午夜福利,免费看| 香蕉国产在线看| 啦啦啦观看免费观看视频高清 | a在线观看视频网站| 我的亚洲天堂| 女人高潮潮喷娇喘18禁视频| 国产成人精品在线电影| 午夜福利视频1000在线观看 | 亚洲自拍偷在线| 嫩草影院精品99| 久久这里只有精品19| 国产av一区在线观看免费| 波多野结衣巨乳人妻| 涩涩av久久男人的天堂| 久久久国产精品麻豆| 精品无人区乱码1区二区| netflix在线观看网站| 少妇粗大呻吟视频| 啦啦啦 在线观看视频| 国产国语露脸激情在线看| 亚洲 欧美一区二区三区| 激情在线观看视频在线高清| 亚洲少妇的诱惑av| 露出奶头的视频| 国产熟女午夜一区二区三区| 校园春色视频在线观看| 国产激情欧美一区二区| 久久影院123| 久久久久久久久中文| 熟妇人妻久久中文字幕3abv| 村上凉子中文字幕在线| 久久人人97超碰香蕉20202| 午夜福利,免费看| 欧美+亚洲+日韩+国产| 亚洲熟妇中文字幕五十中出| 成年人黄色毛片网站| 国产aⅴ精品一区二区三区波| 动漫黄色视频在线观看| 黄片小视频在线播放| 国产精品美女特级片免费视频播放器 | 国产精品九九99| 亚洲人成77777在线视频| 桃色一区二区三区在线观看| 亚洲专区字幕在线| 精品国产亚洲在线| 欧美日本亚洲视频在线播放| 久久精品人人爽人人爽视色| 精品无人区乱码1区二区| 国产成+人综合+亚洲专区| 国产精品久久久av美女十八| 国产精品av久久久久免费| bbb黄色大片| 日日爽夜夜爽网站| 精品一区二区三区视频在线观看免费| 久久婷婷人人爽人人干人人爱 | 99精品在免费线老司机午夜| 免费无遮挡裸体视频| 人人妻人人澡欧美一区二区 | 成人18禁在线播放| 精品少妇一区二区三区视频日本电影| 国产精品香港三级国产av潘金莲| 日本 欧美在线| 伦理电影免费视频| 欧美亚洲日本最大视频资源| 欧美激情高清一区二区三区| 亚洲精品国产一区二区精华液| 亚洲av成人一区二区三| 国产免费男女视频| 久久热在线av| 欧美日本视频| 女人高潮潮喷娇喘18禁视频| 亚洲五月天丁香| 欧美最黄视频在线播放免费| 久久精品亚洲熟妇少妇任你| 韩国精品一区二区三区| 久热爱精品视频在线9| 久久欧美精品欧美久久欧美| 女人被躁到高潮嗷嗷叫费观| av天堂在线播放| 亚洲第一av免费看| 两个人免费观看高清视频| 性色av乱码一区二区三区2| 电影成人av| 夜夜爽天天搞| 亚洲人成伊人成综合网2020| 18禁美女被吸乳视频| 日本 欧美在线| 色尼玛亚洲综合影院| 国产99白浆流出| 久久久国产欧美日韩av| 婷婷精品国产亚洲av在线| 在线观看66精品国产| 女同久久另类99精品国产91| 女性被躁到高潮视频| 亚洲自拍偷在线| 亚洲激情在线av| 国产精品久久视频播放| 久久久久精品国产欧美久久久| 人人妻人人澡欧美一区二区 | av天堂久久9| 999精品在线视频| 高清黄色对白视频在线免费看| 成人18禁高潮啪啪吃奶动态图| 午夜福利高清视频| 亚洲精品中文字幕一二三四区| 女人被狂操c到高潮| 欧美乱码精品一区二区三区| 久久婷婷人人爽人人干人人爱 | 中文字幕高清在线视频| 久久久久亚洲av毛片大全| 国产精品久久久久久精品电影 | 欧美激情 高清一区二区三区| 色播亚洲综合网| 法律面前人人平等表现在哪些方面| 午夜激情av网站| 亚洲国产精品sss在线观看| 日韩精品中文字幕看吧| 999久久久精品免费观看国产| 午夜福利高清视频| 日韩精品青青久久久久久| 亚洲久久久国产精品| 亚洲av第一区精品v没综合| 国产伦人伦偷精品视频| 国产精品一区二区三区四区久久 | 久久久久国内视频| 亚洲aⅴ乱码一区二区在线播放 | 日本vs欧美在线观看视频| 成人精品一区二区免费| 成人永久免费在线观看视频| 91麻豆精品激情在线观看国产| 女人精品久久久久毛片| 久久久久久人人人人人| 久久久久国内视频| av电影中文网址| 国产精品九九99| 久久久久精品国产欧美久久久| 热re99久久国产66热| 免费在线观看日本一区| 18禁黄网站禁片午夜丰满| 国产1区2区3区精品| 自线自在国产av| 精品国产乱码久久久久久男人| 国产精品亚洲一级av第二区| 深夜精品福利| aaaaa片日本免费| 欧美日韩瑟瑟在线播放| 涩涩av久久男人的天堂| 欧美在线一区亚洲| 日韩大尺度精品在线看网址 | 国产精品精品国产色婷婷| 精品熟女少妇八av免费久了| 中文字幕高清在线视频| 一区二区三区高清视频在线| 久久中文字幕人妻熟女| 老司机福利观看| 999精品在线视频| 国产真人三级小视频在线观看| 亚洲av电影在线进入| 精品日产1卡2卡| 精品久久久久久久人妻蜜臀av | 老汉色∧v一级毛片| 免费看a级黄色片| 精品人妻1区二区| 免费看美女性在线毛片视频| 多毛熟女@视频| 国产一区二区三区视频了| 99国产精品免费福利视频| 免费不卡黄色视频| 女人爽到高潮嗷嗷叫在线视频| 久久人人97超碰香蕉20202| 亚洲av日韩精品久久久久久密| 国产区一区二久久| 亚洲av五月六月丁香网| 神马国产精品三级电影在线观看 | 国产欧美日韩一区二区三| 在线观看免费日韩欧美大片| 美女扒开内裤让男人捅视频| 国产极品粉嫩免费观看在线| 国产成人av激情在线播放| 中文亚洲av片在线观看爽| 亚洲国产精品999在线| 亚洲精品美女久久久久99蜜臀| 亚洲精品中文字幕一二三四区| www.精华液| 日韩免费av在线播放| 无遮挡黄片免费观看| 操美女的视频在线观看| 欧美不卡视频在线免费观看 | 十八禁人妻一区二区| 亚洲情色 制服丝袜| 亚洲精品在线观看二区| 久久久久久久精品吃奶| 91精品国产国语对白视频| 搡老岳熟女国产| 国产亚洲欧美98| netflix在线观看网站| 少妇被粗大的猛进出69影院| 午夜福利视频1000在线观看 | 国产成人系列免费观看| 免费观看人在逋| 精品无人区乱码1区二区| 国产1区2区3区精品| 日韩欧美一区视频在线观看| 久久中文字幕一级| 国产区一区二久久| 国产99白浆流出| 一个人观看的视频www高清免费观看 | 日本vs欧美在线观看视频| 精品久久久精品久久久| 久久精品人人爽人人爽视色| 午夜成年电影在线免费观看| 伊人久久大香线蕉亚洲五| 高清毛片免费观看视频网站| 亚洲 欧美一区二区三区| 一a级毛片在线观看| 麻豆国产av国片精品| 亚洲一区二区三区不卡视频| 亚洲色图av天堂| 久热这里只有精品99| 亚洲五月婷婷丁香| 夜夜看夜夜爽夜夜摸| 久久性视频一级片| 国产在线精品亚洲第一网站| 1024香蕉在线观看| 日本撒尿小便嘘嘘汇集6| 此物有八面人人有两片| av福利片在线| 麻豆久久精品国产亚洲av| 香蕉国产在线看| 黄色 视频免费看| 在线观看免费日韩欧美大片| 夜夜看夜夜爽夜夜摸| 天天躁夜夜躁狠狠躁躁| 免费看十八禁软件| 精品久久久精品久久久| 露出奶头的视频| 久久国产亚洲av麻豆专区| 久久久国产欧美日韩av| 国产精品久久视频播放| 久久伊人香网站| 国产不卡一卡二| 国产欧美日韩综合在线一区二区| 丝袜美足系列| 久久精品国产清高在天天线| 久久草成人影院| 欧美亚洲日本最大视频资源| 日本 欧美在线| 国产成人精品久久二区二区免费| 在线免费观看的www视频| svipshipincom国产片| 在线视频色国产色| 国产成人av教育| 妹子高潮喷水视频| 麻豆av在线久日| 女性被躁到高潮视频| 亚洲av第一区精品v没综合| 男男h啪啪无遮挡| 国产91精品成人一区二区三区| 国产麻豆69| 久久久久久久久免费视频了| 日韩欧美一区视频在线观看| 欧美一级毛片孕妇| 午夜免费成人在线视频| 人人妻人人澡人人看| 岛国在线观看网站| 亚洲av电影在线进入| 怎么达到女性高潮| 91麻豆精品激情在线观看国产| 多毛熟女@视频| 精品国产一区二区三区四区第35| 成人国语在线视频| 国产精品综合久久久久久久免费 | 香蕉国产在线看| 国产精品98久久久久久宅男小说| АⅤ资源中文在线天堂| 成年女人毛片免费观看观看9| ponron亚洲| 欧美人与性动交α欧美精品济南到| 侵犯人妻中文字幕一二三四区| cao死你这个sao货| 久久精品亚洲熟妇少妇任你| 亚洲人成77777在线视频| xxx96com| 久久欧美精品欧美久久欧美| 黄片大片在线免费观看| 亚洲专区字幕在线| 亚洲人成77777在线视频| 成人欧美大片| АⅤ资源中文在线天堂| 高清在线国产一区| 国产成年人精品一区二区| 91老司机精品| 欧美午夜高清在线| 欧洲精品卡2卡3卡4卡5卡区| 精品人妻1区二区| 久久久精品国产亚洲av高清涩受| 亚洲专区中文字幕在线| 欧美乱妇无乱码| 日韩中文字幕欧美一区二区| 18美女黄网站色大片免费观看| 手机成人av网站| 黄频高清免费视频| 国产伦一二天堂av在线观看| 久久久国产精品麻豆| 一级毛片精品| 国产精品九九99| 中文字幕av电影在线播放| 亚洲精品美女久久av网站| 黑人欧美特级aaaaaa片| 国产精品,欧美在线| 国内精品久久久久精免费| 天堂√8在线中文| 99精品在免费线老司机午夜| 亚洲精品粉嫩美女一区| 国产1区2区3区精品| 日韩三级视频一区二区三区| 成人精品一区二区免费| 久久精品人人爽人人爽视色| 黄色毛片三级朝国网站| 亚洲精品美女久久久久99蜜臀| 精品一区二区三区av网在线观看| 男女床上黄色一级片免费看| 啦啦啦观看免费观看视频高清 | 国产亚洲欧美98| 此物有八面人人有两片| 夜夜夜夜夜久久久久| 亚洲精品在线观看二区| 性少妇av在线| 精品人妻1区二区| 老司机午夜福利在线观看视频| 国产真人三级小视频在线观看| 婷婷丁香在线五月| 久久精品国产亚洲av香蕉五月| 成人亚洲精品av一区二区| 国产主播在线观看一区二区| 欧美久久黑人一区二区| 91精品三级在线观看| 欧美最黄视频在线播放免费| АⅤ资源中文在线天堂| 男男h啪啪无遮挡| or卡值多少钱| 午夜福利影视在线免费观看| 久久久久久久久久久久大奶|