遼寧工業大學學報(自然科學版)第41卷總目次

遼寧工業大學學報(自然科學版)第41卷總目次

控制工程

基于xgboost模型的消費者信用評級系統……………………………… 史 偉，王明月，張青云，李曉會(1)

數字信號處理虛擬仿真綜合實驗平臺的設計……………………………周城旭，王冬霞，曹玉東，曹洪奎(5)

基于改進的Census變換的立體匹配算法…………………………………閆 佳，曹玉東，曲 直，蔡希彪(11)

基于多維度控制的酒店節能系統……………………………………………………褚治廣，李 剛，張 興(15)

源極引線在開關過程中對柵源電壓的影響分析………………………………………………………陳之勃(19)

機械車輛工程

摩擦焊接工藝參數在不同施加方式下的比較研究…………………………………李衛民，趙旭東，李 巖(23)

車載電動汽車充電器的研究與設計………………………………………梁鋒林，鄭德山，黃松峰，邱興陽(28)

材料化工

純鈦板材裂紋與鑄錠質量關聯性研究……………………………………………戴 山，張 薇，吳 東，曲家東，趙兵兵，高尚飛，鄧作鵬(34)

Ag摻雜HA粉體及陶瓷材料的制備和抗菌性能研究………………………………李曉爽，于景媛，李 強(38)

建筑科學

基于TRNSYS的北方農村太陽能與生物質鍋爐聯合供暖系統優化分析…………楊雪秀，趙 薇，滿鑫香(43)

技術經濟

基于樸素貝葉斯分類器的垃圾分類系統……………………………………………………李 勇，鄭唯加(49)

基于學生滿意度的大學校區內超市評價研究…………………蔡曉榮，陳 昕，王泓元，高林杰，盛依婷(53)

物流企業質量管理實踐對知識螺旋的影響機理……………………………………初銘暢，崔 悅，馬 靜(58)

建設項目多目標調度優化的粒子群算法………………………………… 劉新博，劉曉偉，郭 誠，張 巍(63)

基礎研究

泵浦光強度對D2+諧波輻射效率的影響……………………………………………王 鈺，劉 航，馮立強(68)

控制工程

基于遺傳算法輪轂蓋卡扣優化設計…………………………………………………張曉光，魯 琪，張振闖(71)

一種基于K-means聚類及分組策略的TSP問題啟發式算法…………………………………………時慧琨(75)

基于禁忌搜索算法求解流水作業最小誤工調度問題………………………………韋 康，李昕昀，陳 鑫(79)

針對CT系統參數標定和成像建模及算法研究………………………………………………………王有德(84)

汽車與機械

逆向工程技術研究現狀與展望…………………………………高 宇，李衛民，趙旭東，江國海，叢 偉(90)

基于觸須算法的自動平行泊車規劃 …………………………………………………………范思奇，李 剛(95)

微型電動汽車動態無線充電技術的研究………………………………… 邱興陽，梁鋒林，鄭維清，鄭德山(99)

無人駕駛四輪獨立驅動電動車穩定性控制研究…………………………………金鴻耀，李 剛，杜利民(105)

技術經濟

全球價值鏈下遼寧省裝備制造業出口競爭力影響因素研究……………趙立敏，楊士富，霍雨桐，余佳群(111)

基于突發事件的火車站行人疏散仿真………………………………………………………裴磊磊，王建華(115)

材料冶金

單晶、多晶銅油滑動磨損行為及浸泡腐蝕行為對比研究………………………………… 劉思萌，商 劍(122)

建筑與力學

節點域厚度對節點抗震性能影響的有限元分析………………………………… 趙濱宇，董錦坤，秦鵬亮(129)

鋼筋混凝土框架夾心節點的抗震性能分析……………………………………… 張東升，董錦坤，王 靜(132)

豎直圓管內沖擊射流過程中流體運動現象的數值計算………………………… 楊 柳，張 爽，王 倩(135)

控制工程

SQL注入攻擊的分析與防范…………………………………………………………………………翟寶峰(141)

二進制浮點數轉十進制的快速方法………………………………………………熊幫玲，吳海燕，程洋洋(144)

基于DEA模型的省級重點實驗室績效評價研究……………………………………………………達 虎(148)

一種基于用戶興趣特征的微博信息轉發預測方法…………………………………………張霽雯，周 軍(153)

基于Stacking集成學習的員工離職預測方法……………………………………李佳浩，李 昕，褚治廣(157)

機械車輛工程

無人駕駛電動賽車線控制動策略開發……………………………………李 剛，張?zhí)K才，任建平，石 晶(161)

材料化工

N-(4-(2-乙酰氨基噻唑-4-基)苯基)-3-甲基苯甲酰胺的合成、晶體結構及抗腫瘤活性研究………………………………………………………周 芳，康佳銘，李偉銘，張志華(166)

以碳量子點為過氧化物模擬酶的過氧化氫檢測 ……………………………………………………張婷婷，孔祥清，付 瑩，單鳳君，宋 晨，袁 丹(170)

土壤中鉻含量分析方法的改進研究…………………………………………………………………高 波(174)

微波消解-電位滴定法測鐵礦石全鐵含量不確定度評估 ……………………………………………………韓紀超，康 菲，徐大偉，王夢婕，陳海林，楊常青(178)

建筑科學

節點域厚度對DTR節點的耗能能力的研究………………………………………劉丹丹，董錦坤，秦鵬亮(181)

增大截面法加固RC柱耐火性能有限元分析……………………………溫 凱，劉 猛，許兆友，張之驍(184)

焓法與顯熱容法在建筑相變蓄熱技術數值模擬中的應用………………………黨 昕，孟 多，高 慧(188)

技術經濟

基于模糊綜合評價法的地鐵應急管理能力評價……………………………………………楊 蘇，孫太保(195)

股票價格與企業績效關聯度探究…………………………………………………鄭 華，芮林仁，陳書婕(201)

基礎研究

降階型熱波方程解的存在性和唯一性………………………………………………………金雪蓮，張思佳(206)

環保與材料化工

電子廢物的挑戰與歸趨：廢物-資源-再生材料-環境………………………………………許振明，牛 博(211)

聯苯四羧酸基配位聚合物的結構與性能的研究進展……………………遲 杰，鐘寶琦，王冰倩，劉國成(216)

超純鐵素體不銹鋼SUS444焊管機組生產工藝研究…………………………………………………孫 楠(224)

汽車與機械

一種無人駕駛賽車路徑規劃算法研究……………………李 剛，金鴻耀，冀同濤，張旭斌，任建平(228)

基于Python的汽車安全氣囊跌落實驗數據分析…………陳 昕，阮永嬌，曹景勝，陳婭鑫，孫承臻(232)

智能駕駛中雙目視覺關鍵技術與應用算法………………………………………………朱子陽，陳 雙(236)

高壓冷卻對車加工切屑的形狀影響探究……………………………………………………………劉 星(241)

建筑與力學

BIM技術國內外研究現狀綜述…………………………………………………竇存杰，董錦坤，賈 君(245)

計算機與通信

基于AMBTC壓縮位圖和候選字符串表的可逆信息隱藏方法…………………………夏婷婷，江 玲(250)

小型加工生產線自動監控系統的研究…………………………………………王衍皓，楊匯軍，陳翔麟(257)

技術經濟

遼寧省制造業與新一代信息技術產業融合發展研究……………………………………初銘暢，何 強(261)

基于正交投影法的區域物流能力測算研究—以“一帶一路”省份為例 ………………………………………………………………………葛 勇，周 燕，趙裕鑫，裴月寒(264)

基礎研究

一類圖的優美標號與序列標號…………………………………………………徐美進，劉春峰，高 洋(269)

機場出租車接客方案與上客點的研究……………………………………………………吳云標,唐大放(274)

機械工程

面向工程應用的應力集中與應力奇異現象的有限元研究…………高思遠，趙旭東，李衛民，江國海(281)

基于RBF神經網絡的DPH-260包裝機成型溫度控制系統 ……………………………………………………………張禧瑩，張廷建，張思奇，李 煜，張德強(288)

基于DPH260的包裝機工作控制系統設計………………………… 張思奇，張德強，張禧瑩，張廷建(292)

雙面驅動直線型超聲電機振子的模態分析及參數優化………………………余祥瑞，何 勍，趙彥東(297)

一種錐殼形旋轉超聲電機的結構設計與模態分析……………………………趙彥東，何 勍，余祥瑞(301)

機械類運動器械設計性能模糊綜合評價………………………………………王麗艷，欒若星，趙 穎(304)

控制工程

改進蟻群算法對TSK-FLS的參數設計………………………………………………………………蘭 潔(307)

光伏微電網儲能平抑功率波動的控制策略研究………………………………邱子鑒，李寶國，鄭怡璇(312)

計算機應用

基于暗通道先驗的圖像去霧方法………………任佳興，白 爽，曹 睿，曲 直，蔡希彪，曹玉東(317)

代價樹深度優先搜索及優化…………………………………………………………………………劉慶宇(322)

應急物資配送問題研究……………………………………………………………………王金英，包立軍(325)

化工與材料

活性氧化鋁吸附模擬燃料中苯胺或吡啶的性能研究 ………………………………………熊 睿，唐 克，趙 罡，洪 新，矯寶慶，左 克，田鵬飛(330)

輕軌低地板列車車體彎軸端面開裂原因分析……………王丹丹，周勝鵬，谷志剛，隋 燕，叢連蔚(334)

技術經濟

基于股票估值折價與溢價對中國科創版市場與美國NASDAQ市場的對比分析………………………………………………………………………………李 勇，崇雨琪(337)

基于改進熵權 & DEMATEL的綜合管廊PPP項目風險因素權重分析 ………………………………………………………………………朱 琛，申建紅，王 迪，賈格淋(342)

建筑與力學

改進的H型鋼梁柱剛性節點抗震性能研究……………………………邱 昊，董錦坤，王 靜，陳章偉(347)

機械工程

基于試驗對比的汽車輪轂動特性及疲勞壽命研究………唐貴基，喻自力，王曉龍，白 潔，高會超(351)

考慮偏載嚙合的齒輪系統接觸分析及其嚙合剛度求解…………………………………許月強，張 昊(357)

NGD 3.0柴油發動機三維數字模型重構………………………………………李衛民，江國海，趙旭東(362)

基于Fisher判別的接觸式輪廓儀自動標注分析……………………………………………………王 軍(368)

基于虛擬樣機的步進裝置分析改進與動力學建?！跫杨?，張德強，李 煜(373)

材料工程

超聲功率對Al-5%Cu合金凝固組織及凝固行為的影響…………趙志偉，于君娜，羅崇輝，安昊瀛(379)

控制工程

電力系統分裂法潮流及其應用研究………………………………………………………矯 賀，李寶國(383)

大功率中頻電源軟啟動方法的研究……………………………………………任國臣，任軒呈，姜丕杰(388)

計算機應用

基于圖像特征分析的大數據醫療—肝癌影像AI診斷………………………李 昕，岳 文，褚治廣(392)

基于神經網絡改進人臉識別算法………………………………………………胡美姣，尚 銳，王諳宇(396)

建筑與力學

我國建筑業各區域發展水平的研究—基于因子分析和聚類分析………………………楊 蘇，王曉虎(400)

海水海砂混凝土力學性能研究綜述…………………………………韓 剛，王學志，辛 明，蔡金娜(405)

軸壓比對鋼筋混凝土框架節點抗震性能的影響………………………………吳小滿，董錦坤，王 靜(409)

（第41卷卷終）

The Vol. 41 Contents of the Journal of Liaoning University of Technology (Natural Science Edition)

Consumer Credit Rating System Based on the Xgboost Model…………………………………………………(1)

Design of Comprehensive Experiment Platform for Digital Signal Processing on Virtual Simulation…………………………………………(5)

Stereo Matching Algorithm Based on Improved Census Transform………………………………………………………………(11)

Energy-saving System in Hotels Based on Multi-dimensional Control……………………………………………………………………(15)

Analysis of Influence of Source Lead on Gate Voltage During Switching………………………(19)

Comparative Study of Friction Welding Process Parameters under Different Load Modes…………………………………………………………………………(23)

Research and Design of Chargers for on-board Electric Vehicles……………………………………(28)

Correlation Between Linear Crack and Quality of Ingot in Pure Titanium Plate……(34)

Study on Preparation and Antibacterial Properties of Silver-loaded Lydroxyapatite Powder and Silver-Loaded Hydroxyapatite Ceramic………………………(38)

Optimization Analysis of Solar Energy and Biomass Boiler Combined Heating System in Northern Rural Areas Based on TRNSYS………………………………(43)

Garbage Classification System Based on Naive Bayesian Classifier………………………………………………………………………………………(49)

Research on Evaluation of Supermarkets on University Campus Based on Students’ Satisfaction………………………………(53)

Influence Mechanism of Quality Management Practice of the Logistics Enterprise on the Knowledge Spiral………………………………………………(58)

Particle Swarm Optimization for Construction Project Scheduling with Multi Criteria………………………………………………………(63)

Effect of Pump Pulse Intensity on D2+Harmonic Efficiency…………(68)

Optimization Design of Clasp for Hub Cover Based on Genetic Algorithm …………………………………………………………(71)

Heuristic Algorithm for TSP Problem Based on K-means Clustering and Grouping Strategy …………………………………………………………………………………………………(75)

Tabu Search Algorithm to Solve the Problem of Minimal Delay Scheduling in a Flowshop System ……………………………………………………………………………(79)

Research on Parameter Calibration and Imaging Modeling and Algorithm of CT System………(84)

Current Situation and Prospects of Reverse Engineering Technology …………………………………………(90)

Automatic Parallel Parking Planning Based on Whisker Algorithm………………………(95)

Research on Dynamic Wireless Charging Technology for Micro Electric Vehicle ……………………………………(99)

Research on Stability Control of Autonomous Four-wheel Independent Drive Electric Vehicle …………………………………………………………………………(105)

Research on Influencing Factors of Export Competitiveness of Liaoning Equipment Manufacturing Industry under the Global Value Chain……………………(111)

Simulation of Pedestrian Evacuation in Railway Station in Emergency………(115)

Comparative Study on Oil Sliding Wear Behavior and Immersion Corrosion Behavior of Mono- and Poly-crystalline Copper……………………………………………………(122)

Finite Element Analysis of Influence of Joint Domain Thickness on the Seismic Performance of Joints ……………………………………………………………(129)

Seismic Performance Analysis of Sandwich Joints of Reinforced Concrete Frame …………………………………………………………Z(132)

Numerical Analysis of Turbulent Fluid in Impinging Jet Process in Vertical Circular Tube …………………………………………………………………(135)

Analysis and Prevention of SQL Injection Attack……………………………………………(141)

Method to Convert Binary Floating Point Number to Decimal Integer………………………………………………………(144)

Performance Evaluation of Provincial Key Laboratory Based on DEA Model………………………(148)

Microblog Information Forwarding Prediction Method Based on Users’ Interest Features…………………………………………………………………………………(153)

Employee Turnover Prediction Method Based on Stacking Integrated Learning…………………………………………………………………………(157)

Development of Brake-by-Wrie Strategy of Autonomous Electric Racing Car…………………………………………………………(161)

Synthesis, Crystal Structure and Anti-tumor Activity of N-(4-(2-Acetylaminothiazol-4-yl)Phenyl)-3-Methylbenzamide………………………(166)

Hydrogen Peroxide Detection by Using Carbon Quantum Dots as Peroxidase Simulation Enzyme……………(170)

Improvement of Analytical Method for Chromium Content in Soil…………………………………(174)

Evaluation of Uncertainty in Determination of Total Iron in Iron Ore Microwave Digestion-PotentiometricTitration……(178)

Thickness of Node Domain Research on the Energy Dissipation of the DTR Node……………………………………………………………(181)

Finite Element Analysis of Fire Resistance Performance of RC Column by Enlarged Section Method……………………………………………………(184)

Application of Enthalpy Method and Apparent Heat Capacity Method in Numerical Simulation for Phase Change Heat Storage Technology in Buildings………………………(188)

Evaluation of Metro Emergency Management Capability Based on Fuzzy Comprehensive Evaluation Method…………………………………………………………………(195)

Research on the Correlation Between Stock Price and Corporate Performance…………………………………………………………………(201)

Existence and Uniqueness of the Solution to the Hot-Wave Equation by the Order Reduction…………………………………………………………………………………(206)

Challenges and Trends in E-waste: Waste, Resources,Materials and Environment……………………………………………………………………………(211)

Review on the Structures and Properties of Coordination Polymers Based on Biphenyltetracarboxylates……………………………………………(216)

Study on Production Process of Ultra Pure Ferritic Stainless Steel SUS444 Welded Pipe Mill……………………………………………………………………………………………………(224)

Research on a Path Planning Algorithm for Autonomous Race Cars……………………………………(228)

Experimental Data Analysis of Automotive Airbag Drop Based on Python………………………(232)

Key Technology and Application Algorithm of Binocular Vision in Intelligent Driving………………………………………………………………………………(236)

Influence of High Pressure Cooling on Turning Chips………………………………………………(241)

Overview of BIM Technology Research Status at Home and Abroad……………………………………………………………………(245)

Reversible Data Hiding Method Based on AMBTC Compression Bitmaps and Candidate String Table …………………………………………………………………………………(250)

Study on Automatic Monitoring System of Small-scale Processing Line ………………………………………………………(257)

Research on the Integrated Development of Manufacturing Industry and New Generation Information Technology Industry in Liaoning Province………………………………………………(261)

Research on Regional Logistics Capabilities Based on Vertical Projection Method—A Case Study of Provinces Along the “Belt and Road”……………………………(264)

A Class of Graceful andSequential Graph Labeling………………(269)

Studies on Picking-up Scheme and Boarding Place of Airport Taxi………………………………………………………………………………(274)

Finite Element Study of Stress Concentration and Stress Singular Phenomenon for Engineering Applications………………………………………………(281)

Molding Temperature Control System of DPH-260 Packaging Machine Based on RBF Neural Network………………………………(288)

Working Control System Design of Packaging Machine Based on DPH260……………………………………(292)

Modal Analysis and Parameter Optimization of Vibrator for Double-sided Driving Linear Ultrasonic Motor …………………………………………………………………(297)

Structure Design and Modal Analysis of a Cone-shell Rotating Ultrasonic Motor…………………………………………………………………(301)

Fuzzy Comprehensive Evaluation on Design Performance for Enginery Sports Equipment………………………………………………………………(304)

Improved Ant Colony Algorithm for TSK-FLS Parameter Design…………………………………(307)

Research on Control Strategy of Photovoltaic Microgrid Energy Storage to Suppress Power Fluctuation………………………………………………………………(312)

Image Defogging Method Based on Dark Channel Prior ………………………………(317)

Depth First Search for Cost Tree and Its Optimization…………………………………………(322)

Research on Distribution of Emergency Materials……………………………(325)

Study on Adsorption Removal of Aniline or Pyridine from Model Fuels by ActivatedAlumina ………………(330)

Faiure Analysis of C Garde Steel Bending Shaft ………………………(334)

Comparative Analysis of China’s A-share Market and NasdaqMarket Based on Discount and Premium of Stock Valuation…………………………………………………………………(337)

Risk Factor Weight Analysis of Utility Tunnel PPP Project Based on Improved Entropy Weight & DEMATEL ………………………………………………………(342)

Research on Seismic Performance of Improved H-beam Column Rigid Joint ………………………………………………(347)

Research On Dynamic Characteristics and Fatigue Life of Automobile Wheel Hub Based On Test Comparison………………………………………(351)

Contact Analysis of Gear System Considering Mesh Misalignment and Its Meshing Rigidity Solution…………………………………………………………………………………(357)

3D Digital Model Reconstruction of NGD 3.0 Diesel Engine………………………………………………………………(362)

Automatic Marking Analysis of Contact Profilometer Based on Fisher Discriminant ……………………………………………………………………………………………………(368)

Analysis Improvement and Dynamic Modeling of Stepping Device Based on Virtual Prototype…………………………………………………………………(373)

Effect of Ultrasonic Power on Solidification Structure andSolidification Behavior of Al-5% Cu Alloy………………………………………………(379)

Research on Diakoptics of Power Flow and Its Application in Power System………………………………………………………………………………………(383)

Research on Soft Start Method of High Power IF Power Supply ……………………………………………………………(388)

Big Data Medical Treatment Based on Image Feature Analysis: Image AI Diagnosis of Liver Cancer …………………………………………………………………………(392)

Improved Face Recognition Algorithm Based on Neural Network ……………………………………………………………………(396)

Research on the Regional Development Level of China’s Construction Industry Based on Factor Analysis and Cluster Analysis………………………………………………………………(400)

Summary of Research on Mechanical Properties of Marine Sand Concrete …………………………………………………………(405)

Effect of Axial Compression Ratio on Seismic Behavior of Reinforced Concrete Frame Node ………………………………………………………………(409)

(The End of Vol. 41)