• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Shaped charge penetration into high-and ultrahigh-strength Steel-Fiber reactive powder concrete targets

    2020-04-09 18:43:08QingqingXioZhengxingHungXudongZuXinJiQifengZhuWeiCi
    Defence Technology 2020年1期

    Qing-qing Xio ,Zheng-xing Hung ,*,Xudong Zu ,Xin Ji ,Qi-feng Zhu ,Wei Ci

    a School of Mechanical Engineering,Nanjing University of Science and Technology,Xiaolingwei 200,Nanjing,210094,China

    b China South Industries Group Corporation,Chongqing,400039,China

    Keywords:Shaped charge Reactive powder concrete target Penetration Radial drift velocity Gap effects

    ABSTRACT Experiments on shaped charge penetration into high and ultrahigh strength steel-fiber reactive powder concrete(RPC)targets were performed in this paper.Results show that the variation of penetration depth and crater diameter with concrete strength is different from that of shaped charge penetration into normal strength concrete(NSC).The crater diameter of RPC is smaller than that of NSC penetrated by the shaped charge.The jet particles are strongly disturbed and hardly reach the crater bottom because they pass through the narrow channel formed by jet penetration into the RPC.The effects of radial drift velocity and gap effects of jet particles for a shaped charge penetration into RPC target are discussed.Moreover,a theoretical model is presented to describe the penetration of shaped charge into RPC target.As the concrete strength increases,the penetration resistance increases and the entrance crater diameter decreases.Given the drift velocity and narrow crater channel,the low-velocity jet particles can hardly reach the crater bottom to increase the penetration depth.Moreover,the narrow channel has a stronger interference to the jet particles with increasing concrete strength;hence,the gap effects must be considered.The drift velocity and gap effects,which are the same as penetration resistance,also have significant effects during the process of shaped charge penetration into ultrahigh-strength concrete.The crater profiles are calculated through a theoretical model,and the results are in good agreement with the experiments.?2020 China Ordnance Society.Production and hosting by Elsevier B.V.on behalf of KeAi Communications Co.This is an open access article under the CCBY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

    1.Introduction

    Concrete is the most commonly used construction material.In recent years,a significant growing trend in the utilization of concrete has occurred because of its superior performance over conventional materials[1].With the development of concrete technology,high-performance concrete(HPC)and ultrahighperformance concrete have been widely used in the construction of high-rise buildings,bridges,highways,airport runways,largespan buildings,offshore buildings,and structural repairs[2-6].Meanwhile,the high-and ultrahigh-strength concrete which possess great resistance to impact loading have also been used in military protection engineering to improve antiballistic ability and enhance the protective properties of structures.

    The ballistic and protective performance of normal-strength concrete(NSC)under impulsive loading,such as blast loading[7-10],projectile impact[11-14],and shaped charge penetration[15-20],have been widely investigated in the last decades.The HPC,which is of higher strength and better durability and has been widely used in various structures,has recently attracted considerable interest owing to its performance under impulsive loading.Ngo[21]investigated the blast resistance of ultrahigh strength concrete(UHSC)panels made of reactive powder concrete(RPC)against an explosion of 5 t hexoline(equivalent to 6 t of TNT)at the standoff distances of 30 m and 40 m.The RPC panels performed extremely well,whereas the panel made of NSC was breached;results revealed that RPC can also be a very effective material for blast resistance.Yi[22]evaluated experimentally the blastresistant capacity of reinforced UHSC and RPC panels under blast loading.The results indicated that the ultrahigh compressive strengths of UHSC and RPC conferred greater resistance to blast loading than that of NSC.Remennikov[23]analyzed the breach diameters of NSC and HSC panels subjected to contact charge detonations.The breach diameter for HSCpanel is smaller than that produced for NSC panel with the same explosive charge mass.Sovj'ak[24]compared the resistances of ultrahigh-performance fiber-reinforced concrete(UHPFRC),conventional fiber reinforced concrete(FRC),and NSC subjected to the deformable projectile impact.That study revealed that UHPFRC has considerably better resistance to projectile impact,and that containing 2%of fibers by volume has optimal resistance.Zhang[25,26]found that the compressive strength and size and strength(hardness)of the coarse aggregate affect the projectile impact resistance of HSC.Meanwhile,Zhang[25]reported that the penetration depth of projectile impact decreases with an increase in the compressive strength when below a certain level,and further increases in the compressive strength does not have a significant effect on the penetration depth.The high-strength fiber-reinforced concrete with a compressive strength of~100 MPa appears to be most efficient in the protection against projectile impact.Liu[27]observed that steel fibers incorporated into UHPC targets can provide higher shear strength and toughness,which improved the impact resistance regarding depth of penetration(DOP)against the projectile penetration.

    Given its high strength,high toughness,excellent ductility,and good energy absorption,HSC has been confirmed to have better resistance than NSC subjected to blast and projectile.The shaped charge jet,which generally considers that the penetration depth is less affected by the target strength,can be effective against HSC target.How ever,the diameter of the crater generated by shaped charge jet penetration is very sensitive to the target strength[15].This is not good for tandem warhead,which requires a large diameter for the second stage to pass through.Resnyansky[28-30]studied the protection performance of UHPC compared with that of plain concrete subjected to the shaped charge jet,and found that the UHPC demonstrated advanced protective characteristics compared with the plain concrete.Meanwhile,Resnyansky[28]indicated that penetration is possible for HSC subjected to the advanced shaped charge design.Esteban[31]compared the penetration depths of NSC and UHPC by shaped charge jets,and found that the UHPC does not provide a significant reduction in crater diameters and depths.Hence,the use of UHPC to protect structures against shaped charge attacks is not recommended because UHPC has a higher cost than NSC.Zhu[32]indicated that the penetration depth of shaped charge jet decreases exponentially as the compressive strengths of HSC and UHSC increase at the beginning,and then approximates the limit when the compressive strength approaches 200 MPa.The cavity diameters are not affected by the increasing strength grade.

    In the present paper,a total of 12 RPC targets with 4 strength grades,namely,C100,C200,C300,and C400,were prepared,and 8 targets were selected in experiments.A precise shaped charge was used to penetrate the RPC targets at the same standoff.The penetration depth is significantly reduced first and then gradually decreased as the uniaxial compressive strength of RPC increased.How ever,the crater diameter gradually decreased at the entrance and was almost similar to that of the crater bottom with increasing RPC strength.For the authors,these are unexpected results.Thus,the radial drift velocity and gap effects of jet particles were considered during the process of shaped charge jet penetration into HSC.Moreover,the crater profile of the shaped charge jet into HSC was not only affected by the concrete strength but also by the minimum efficient jet velocity and the penetration capability of the jet particles.

    Fig.1.RPC targets.

    2.Experimental setup

    2.1.Target preparation

    The high-and ultrahigh-strength steel-fiber RPC targets with four strength grades,namely,C100,C200,C300,and C400,with steel fiber volumetric ratios of 0%,2%,4%,and 6%,respectively,were prepared.Three targets were processed for each type of reactive powder concrete.Therefore,a total of 12 RPC targets were manufactured(Fig.1).

    A steel casing with wall thickness of 6 mm was designed to fill uncured concrete.The casing had an internal diameter of 600 mm and internal height of 600 mm.The material,mix proportions,and manufacturing methods of RPCs are described in a previous work[32].Moreover,three specimens,which were used to test uniaxial compressive strength were made under the same conditions as each target (Fig. 2). The size of each specimen is 160 mm×40 mm×40 mm.The quasi-static three points bending tests performed firstly to obtain the flexural strength.Then,the two pieces of specimen after being broken were used for the uniaxial compression tests to obtain the compressive strength.Finally,eight RPC targets were used in the experiments.The density ρtand uniaxial compressive strength fcof the eight RPC targets are listed in Table 1.

    Fig.2.Specimens of RPC targets.

    Table 1 Density and uniaxial compressive strength of the RPC targets.

    2.2.Shaped charge

    A precise shaped charge mentioned in Ref.[33]was used in the experiments.Oxygen-free,high-conductivity copper with purity of 99.99%was used as liner material,and the explosive is JH-2(95%RDX and 5%TNT)with a density of 1.713 g/cm3.A sketch of the shaped charge is shown in Fig.3.The charge has a base diameter of 56 mm and height of 73.3 mm.The conical liner has a cone angle of 60°,wall thickness of 1 mm,and height of 42 mm.

    The simulation of the shaped charge jet formation was performed using AUTODYN-2D finite-difference Eulerian code,and the simulation method was verified according to Refs.[15,16].Moreover,the X-ray experiment was performed to determine the parameters of the shaped charge jet.The details of simulation and Xray experiment are published in Ref.[33].Based on the comparison between the experiment and the simulation,the jet parameters,including length,velocity,and diameter,are shown in Fig.4.

    Fig.3.Geometry of shaped charge used in experiments.

    Fig.4.Parameters for the shaped charge jet.

    Fig.5.Test device of shaped charge penetration into RPC Targets.

    2.3.Experimental setup

    The experiments on the precision shaped charges penetrating into RPC targets were performed.A PVC cylinder casing was placed between the charge and the target to ensure that the stand-off(distance between the bottom of the shaped charge and the surface of the target)was 80 mm.The experimental device is shown in Fig.5.

    2.4.Experimental results

    The eight RPC targets of C100-1,C100-3,C200-2,C200-3,C300-1,C300-3,C400-1,and C400-2 were selected for the penetration depth tests.Moreover,in order to observe the crater profile accurately,the target of each test was drilled along the cross section of the penetration hole,and the concrete core was removed.Fig.6 shows the crater profiles of C100-1,C100-3,C200-2,C200-3,C300-1,C300-3,C400-1,and C400-2 penetrated by shaped charges.

    The variation in the penetration depth with uniaxial compressive strength of the RPC targets is illustrated in Fig.7.The penetration depth is significantly reduced as the uniaxial compressive strength of RPC increases from 100.78 MPa to 185.22 MPa.Then,the penetration depth is almost unchanged when the uniaxial compressive strength of RPC increases from 248.36 MPa to 339.07 MPa.The penetration resistance changes little when the uniaxial compressive strength is greater than 200 MPa.

    Fig.6.Concrete core removed from RPC target after penetration.

    Fig.7.Variation in the penetration depth with uniaxial compressive strength of the RPC targets.

    Fig.8.Crater profiles formed by shaped charge penetration into RPC targets with different strengths.

    The comparison of the crater profiles formed by the shaped charge penetration into RPC targets with different strengths is illustrated in Fig.8.Obviously,the entrance crater diameter gradually increased with decreasing RPC strength.Surprisingly,the difference in crater diameter gradually decreased with increasing penetration depth for RPCs with different strengths.The diameter of the crater bottom is nearly the same.In other words,the effect of RPC strength on the crater diameter decreases as the jet velocity decreases.How ever,as the jet velocity decreases,the effect of target strength on the penetration and radial crater grow th velocities is even more significant.

    A more reasonable explanation is that the diameter of the crater generated by jet penetration decreases with increasing RPC strength,and the low-velocity jet particles can easily impact the crater wall and hardly reach the crater bottom to increase the penetration depth because the jet has a consistently low drift velocity after formation[33-35].Thus,the velocity of the jet particle that finally penetrates into the crater bottom increases with increasing RPC strength.The increase of the minimum efficient jet velocity indicates the reduction of the jet effective length during penetration for UHSC.Moreover,the jet particles are strongly disturbed as they pass through the narrow channel formed by jet penetration into RPC,and the penetration capability of the jet particles that can reach the crater bottom will be greatly reduced.Therefore,as the strength of the RPC target increases,the entrance crater diameter gradually decreases,whereas the minimum efficient jet velocity affecting the diameter of the crater bottom increases;the diameter of the crater bottom remains nearly constant.Moreover,the penetration depth is not only affected by the RPC strength but also by the minimum efficient jet velocity.The radial drift velocity and gap effects of jet particles should be considered during the shaped charge jet penetration into UHSC.

    3.Theory

    3.1.Radial drift velocity and gap effects

    Many researchers found that the jets have a lower radial drift velocity after formation.The drift velocity leads to slightly different trajectory of each particle.The jet particle with a low drift velocity impacts crater wall with ease.Furthermore,the jet particle cannot reach the crater bottom to increase depth because the crater diameter generated by the jet is quite small.Segletes[34]confirmed that jet curvature is the major cause of nonideal jet penetration.He measured the drift velocity of particle jets using Xray radiographs and show ed that the drift velocity increases with increasing jet velocity.Held[35]found that machining accuracy and jet breakup result in the drift velocity.Moreover,the gap distance between jet particles also plays an important role in penetration depth,as well as tumbling and dispersion of jet particles.Chou and Flis[36]considered the influence of the gap distance between jet particles on penetration depth.The actual penetration depth of particulate jet reduces with increasing gap.Hancock[37]regarded the drift velocity and gap effects to present a simple empirical mode.Xiao[33]presented an analytical model to describe the radial drift velocity and gap effects of jet particles.The stand-off curve of shaped charge was calculated by using the model.

    During jet formation,machining inaccuracy generates a drift velocity.Moreover,the process of jet breakup is not entirely ductile.Meanwhile,shear and distortion,which cause jet particles to generate a drift velocity,occur during breakup.Thus,the radial drift velocity of particle jets can be described as

    where vdis the radial drift velocity of jet particles,vCdis the drift velocity caused by machining inaccuracy,and vBdis the drift velocity caused by breakup.Dimensional analysis method was used to study the effects of axial velocity vj,jet diameter dB,and strain rate ˙εBduring breakup on radial drift velocity[33].The drift velocity caused by machining inaccuracy and breakup is given by

    where C1is a constant associated with machining inaccuracy,C2is a constant associated with shaped charge structure,tBis the breakup time of jet particle,and tois the time of virtual origin.The radial drift velocity of particulate jet is given by

    Ignoring the transverse movement before fracture,the radial drift distance of a given jet segment at time t can be expressed as

    If the jet particle is out of crater profile,then this phenomenon means

    where Dcis the crater diameter.The particle will not reach the crater bottom to increase the penetration depth.On the contrary,the penetration of the particle increases the depth.

    The penetration depth of particulate jet decreases with the gap distance between increasing jet particles.In the present study,dimensional analysis was also used.Then,the penetration depth of a jet particle,which is related to the relative drift position,relative gap distance,and the properties of the jet and the target,can be obtained as[33].

    When δ*rand g*are close to zero,the particulate jet is similar to a continuous jet,and the penetration depth of the jet particle is equal to that of a continuous jet.The jet particle is similar to a single rod when δ*ris close to zero and g*is sufficiently large,and the penetration depth is obtained as

    where ξ is the relatively decreased value of penetration depth between the single rod and the continuous jet.Moreover,if the jet particles are strongly disturbed as they pass through the narrow channel formed by jet penetration into UHSC,the value of ξ increases.Moreover,steel fibers in the RPC targets can increase the value of ξ.Thus,the penetration capability of disturbed jet particles decreases.

    3.2.Axial penetration and radial crater growth

    In order to determine whether or not the jet particles have an impact on the crater wall,the crater profile generated by the shaped charge jet penetration is necessary.The crater profile prediction,which is also applied to calculate the stand-off curve of shaped charge jet into steel target[33],is discussed in Ref.[15].

    When the axial penetration velocity is greater than the sound velocity,a stationary shock is formed in front of the jet/target interface.The axial penetration equation is given by

    Meanwhile,the final crater diameter equation is given by

    As the jet erodes during penetration,jet velocity and penetration velocity decrease.The axial penetration equation when the axial penetration velocity is lower than the sound velocity becomes

    and the final crater diameter equation becomes

    Moreover,the propagation and attenuation of compaction wave generated by the shaped charge penetration of the target is discussed in detail in Ref.[19].The penetration resistance is considered as the dynamic yield strength of the target.As discussed in Refs.[15,16],the target resistance parameter Rtis obtained from the penetration data using the fitting crater diameter.

    4.Calculation and analysis

    The radial drift velocity and the gap effects of the precision shaped charge used in experiments were confirmed by the standoff curve of jet penetration into the steel target[33].The values of C1and C2in Eq.(3)are given as 0 and 0.24,respectively.The values of N,ξ,and η in Eq.(5)are given as 1.5,0.2,and 2,respectively.Given the absence of strain hardening in the concrete,thepenetration capability of jet particles into the lower-strength concrete should be higher than that of the penetration of jet particles into steel target.As the strength of the concrete increases,the interaction between the jet particles and the UHSC residue becomes more intense due to the decrease in the crater diameter.This means that the value of ξ should be less than 0.2 when the charge penetrates the lower-strength RPC target and greater than 0.2 when the charge penetrates the higher-strength RPC target.

    Table 2 Summary of the shaped charge jet and RPC targets.

    Fig.9.Comparison of the crater profiles between calculations and experimental.

    Meanwhile,the density and uniaxial compressive strength of each RPC target are tested in Section 2.1.The C0and λ values for the RPC target are determined basing on Ref.[38]and are discussed in detail in Ref.[32].Moreover,the penetration resistance Rtcan be obtained by fitting the crater profile[15,16,19,33].Table 2 summarizes the parameters of the shaped charge jet and RPC targets.The minimum efficient jet velocity vm,as well as penetration depth from calculations Pcand experiments Pe,are also listed in Table 2.The details of the calculation method,including the determination of the jet fracture time,are shown in Refs.[15,19,33].The jet breakup time is given by Ref.[39].

    with

    where cbis a constant for identical materials.D0is the jet diameter,and 1/t*is the jet velocity gradient.

    Moreover,the comparison of the crater profiles is illustrated in Fig.9.The calculation results of penetration depth and crater diameter are in good agreement with the experimental results.The penetration resistance is approximately 2 times that of the uniaxial compressive strength of the RPCs when it is less than 185.22 MPa.When the uniaxial compressive strength is greater than 185.22 MPa,the penetration resistance is approximately 1.5-1.6 times that of the uniaxial compressive strength of the RPCs.Moreover,the value of ξ is approximately 0.1 for C100 RPCs.As the strength and the volumetric ratio of the steel fiber of RPC increase,the value of ξ increases to 0.3 for C200,C300,and C400 RPCs.This finding indicates that the penetration capabilities of disturbed jet particles penetrating the C200,C300,and C400 RPCs are less than that of the disturbed jet particles penetrating the C100 RPCs.Under the effect of the radial drift velocity,the minimum efficient jet velocity increases as the RPC strength increases due to the decrease of the entrance crater diameter.Therefore,the diameter of the crater bottom is nearly the same because the jet impact velocity is higher for the higher strength RPCs at the crater bottom.

    Fig.10.Comparison of penetration depth under different conditions with the experimental results.

    The penetration depth without drift velocity and gap effects,ξ=0.1,ξ=0.3,and experimental results was compared,as shown in Fig.10.As can be seen,the penetration depth is significantly higher than the experimental result without considering drift velocity and gap effects.The radial drift velocity and the gap effects should be considered during the shaped charge jet penetration into UHSC.

    5.Conclusions

    The experiments of shaped charge jet penetration into high and ultrahigh strength steel-fiber RPC targets show that the entrance crater diameter gradually increased,while the crater bottom diameter is almost the same as the RPC strength decreased.Moreover,the penetration depth initially decreased,and then is almost unchanged with the increasing RPC strength.

    In order to explain the experimental phenomenon,the radial drift velocity and the gap effects were considered during the shaped charge jet penetration into RPCs.As the strength of the concrete increases,the diameter of the crater generated by shaped charge jet penetration into the concrete decreases,especially the HSC and UHSC.The low-velocity jet particles can hardly reach the crater bottom to increase the penetration depth due to the drift velocity and narrow crater channel.The diameter of the crater bottom is almost the same because the minimum efficient jet velocity is higher for the higher-strength RPCs.Moreover,the penetration capability of the disturbed jet particles is affected by the interaction between the jet particles and the UHSC residue.

    Acknowledgment

    This work was supported by the Natural Science Foundation of China through Grant No.11702144.

    精品人妻一区二区三区麻豆| 九九爱精品视频在线观看| 亚洲av免费在线观看| 成人毛片60女人毛片免费| 国产精品乱码一区二三区的特点| 十八禁国产超污无遮挡网站| 国产成人精品一,二区 | 亚洲中文字幕日韩| 九九在线视频观看精品| 三级国产精品欧美在线观看| 日韩精品青青久久久久久| 亚洲真实伦在线观看| 欧美日韩精品成人综合77777| 久久久久久久久大av| 我的女老师完整版在线观看| 综合色av麻豆| 18禁在线无遮挡免费观看视频| 成人性生交大片免费视频hd| 欧美成人精品欧美一级黄| 晚上一个人看的免费电影| 欧美成人免费av一区二区三区| 中文字幕制服av| 天堂网av新在线| 日韩欧美国产在线观看| 日韩一区二区视频免费看| 亚洲,欧美,日韩| 欧美三级亚洲精品| 久久久午夜欧美精品| 少妇被粗大猛烈的视频| 亚洲自偷自拍三级| 一级二级三级毛片免费看| 丝袜美腿在线中文| 一区二区三区免费毛片| 少妇熟女欧美另类| 亚洲av电影不卡..在线观看| 欧美一级a爱片免费观看看| 熟妇人妻久久中文字幕3abv| 亚洲电影在线观看av| 欧美日本亚洲视频在线播放| 美女黄网站色视频| 九九热线精品视视频播放| 亚洲av一区综合| 99热全是精品| 国产精品99久久久久久久久| 亚洲乱码一区二区免费版| 国产视频首页在线观看| 麻豆av噜噜一区二区三区| 97超碰精品成人国产| 91午夜精品亚洲一区二区三区| 国产成人福利小说| 麻豆成人午夜福利视频| 久久亚洲国产成人精品v| 久久欧美精品欧美久久欧美| 色哟哟·www| av视频在线观看入口| 在线观看午夜福利视频| 亚洲四区av| 黄色日韩在线| 午夜精品一区二区三区免费看| 中文字幕av在线有码专区| 白带黄色成豆腐渣| 边亲边吃奶的免费视频| 亚洲欧美成人综合另类久久久 | 亚洲美女视频黄频| 国产精品日韩av在线免费观看| 一级二级三级毛片免费看| 国模一区二区三区四区视频| 日本撒尿小便嘘嘘汇集6| 亚洲不卡免费看| 成人综合一区亚洲| 亚洲成av人片在线播放无| 国产精品乱码一区二三区的特点| 欧美区成人在线视频| 女同久久另类99精品国产91| 你懂的网址亚洲精品在线观看 | 国产欧美日韩精品一区二区| 亚洲人成网站高清观看| 精品国内亚洲2022精品成人| 天堂av国产一区二区熟女人妻| 国产精品99久久久久久久久| 欧美日韩一区二区视频在线观看视频在线 | 亚洲熟妇中文字幕五十中出| 中文字幕熟女人妻在线| 欧美日韩乱码在线| 男插女下体视频免费在线播放| 给我免费播放毛片高清在线观看| 中文字幕精品亚洲无线码一区| 亚洲欧美精品综合久久99| 国产成人a区在线观看| 国产探花极品一区二区| 国产精品综合久久久久久久免费| 哪个播放器可以免费观看大片| 爱豆传媒免费全集在线观看| 天美传媒精品一区二区| 国产成人aa在线观看| 国产精品伦人一区二区| 亚洲国产精品国产精品| 亚洲精华国产精华液的使用体验 | 蜜臀久久99精品久久宅男| 美女脱内裤让男人舔精品视频 | 在线观看66精品国产| 国产大屁股一区二区在线视频| 亚洲久久久久久中文字幕| 欧美3d第一页| 久久久久久久亚洲中文字幕| 少妇熟女aⅴ在线视频| 边亲边吃奶的免费视频| www日本黄色视频网| 亚洲av.av天堂| 青春草亚洲视频在线观看| 国产成人福利小说| 中国美女看黄片| 免费看av在线观看网站| 国产欧美日韩精品一区二区| 欧美日韩一区二区视频在线观看视频在线 | 九九爱精品视频在线观看| 在线国产一区二区在线| 在线a可以看的网站| 午夜福利在线在线| 久久久久久久久大av| 在线观看美女被高潮喷水网站| 久久九九热精品免费| 特大巨黑吊av在线直播| 精品久久久噜噜| 黄色配什么色好看| 国产乱人视频| 黑人高潮一二区| 日日干狠狠操夜夜爽| 国产成人aa在线观看| 国产探花在线观看一区二区| h日本视频在线播放| 国产极品天堂在线| 国产精品,欧美在线| 两个人视频免费观看高清| 一区二区三区免费毛片| 韩国av在线不卡| 精品久久久噜噜| 日本熟妇午夜| 人体艺术视频欧美日本| 在线观看一区二区三区| 噜噜噜噜噜久久久久久91| 国产亚洲精品久久久com| 简卡轻食公司| 日本三级黄在线观看| 国产伦在线观看视频一区| 91久久精品电影网| 亚洲精品色激情综合| 亚洲七黄色美女视频| 久久久国产成人精品二区| a级一级毛片免费在线观看| 成年版毛片免费区| 悠悠久久av| 亚洲成人中文字幕在线播放| 亚洲国产欧美在线一区| 免费观看人在逋| 国产成人aa在线观看| 观看免费一级毛片| 白带黄色成豆腐渣| 中文字幕av在线有码专区| 国语自产精品视频在线第100页| 男女啪啪激烈高潮av片| 精品国产三级普通话版| 波多野结衣高清作品| 超碰av人人做人人爽久久| 久99久视频精品免费| 午夜精品国产一区二区电影 | 少妇裸体淫交视频免费看高清| 男插女下体视频免费在线播放| 1024手机看黄色片| 欧美成人精品欧美一级黄| 精品人妻一区二区三区麻豆| 久久久精品大字幕| 国产精品不卡视频一区二区| 久久精品国产亚洲av涩爱 | 床上黄色一级片| 一夜夜www| 精品一区二区三区视频在线| 久久久国产成人精品二区| 精品人妻一区二区三区麻豆| 99久久精品一区二区三区| 免费无遮挡裸体视频| 欧美不卡视频在线免费观看| 12—13女人毛片做爰片一| 日本色播在线视频| 长腿黑丝高跟| 日日干狠狠操夜夜爽| 精品一区二区三区视频在线| 日韩欧美国产在线观看| 人妻制服诱惑在线中文字幕| 高清午夜精品一区二区三区 | 麻豆国产av国片精品| 成人亚洲精品av一区二区| 亚洲国产精品国产精品| 欧美激情久久久久久爽电影| 午夜福利在线观看免费完整高清在 | 26uuu在线亚洲综合色| 观看美女的网站| 一进一出抽搐动态| 成人美女网站在线观看视频| 在线a可以看的网站| 久久99蜜桃精品久久| 国产一区二区亚洲精品在线观看| 18禁在线无遮挡免费观看视频| 青春草国产在线视频 | 欧美日韩在线观看h| 久久精品综合一区二区三区| av黄色大香蕉| 日本色播在线视频| 最近的中文字幕免费完整| 91狼人影院| 天天躁夜夜躁狠狠久久av| 在线观看美女被高潮喷水网站| 亚洲成a人片在线一区二区| 尾随美女入室| 国产成年人精品一区二区| 性欧美人与动物交配| 亚洲电影在线观看av| 青春草亚洲视频在线观看| 国产精品久久久久久久久免| 亚洲,欧美,日韩| 日本色播在线视频| 99久久精品国产国产毛片| av女优亚洲男人天堂| 亚洲国产精品国产精品| 日本成人三级电影网站| 久久亚洲精品不卡| 校园人妻丝袜中文字幕| 国产单亲对白刺激| 少妇熟女aⅴ在线视频| 黄片无遮挡物在线观看| 长腿黑丝高跟| 男人的好看免费观看在线视频| 午夜久久久久精精品| 高清午夜精品一区二区三区 | 国产一级毛片在线| 九草在线视频观看| 五月伊人婷婷丁香| 日日摸夜夜添夜夜爱| 亚洲av不卡在线观看| 国产伦理片在线播放av一区 | 精品午夜福利在线看| 国产成人a∨麻豆精品| 晚上一个人看的免费电影| 成年版毛片免费区| 黄片无遮挡物在线观看| 69人妻影院| 99久国产av精品| 久久久久久久久久成人| 日韩av不卡免费在线播放| 国产一区二区激情短视频| 国产美女午夜福利| 亚洲天堂国产精品一区在线| 在线天堂最新版资源| 免费av毛片视频| 禁无遮挡网站| 精品久久久久久成人av| 变态另类成人亚洲欧美熟女| 搡女人真爽免费视频火全软件| 日韩三级伦理在线观看| av在线播放精品| 欧美成人免费av一区二区三区| 国产成人freesex在线| 色噜噜av男人的天堂激情| 偷拍熟女少妇极品色| 青春草国产在线视频 | 国产精品乱码一区二三区的特点| 村上凉子中文字幕在线| www.色视频.com| 成人无遮挡网站| 欧美高清性xxxxhd video| 91在线精品国自产拍蜜月| 国产中年淑女户外野战色| 欧美变态另类bdsm刘玥| 国产极品精品免费视频能看的| 亚洲美女视频黄频| 好男人视频免费观看在线| 99久国产av精品| 天天一区二区日本电影三级| 中文欧美无线码| 69人妻影院| 国产一级毛片在线| 欧美最黄视频在线播放免费| av天堂中文字幕网| 黄片无遮挡物在线观看| 嫩草影院入口| 亚洲国产精品久久男人天堂| 久久精品国产亚洲av涩爱 | 亚洲精品影视一区二区三区av| 成人二区视频| av黄色大香蕉| 网址你懂的国产日韩在线| 少妇丰满av| 亚洲av第一区精品v没综合| 极品教师在线视频| 日韩国内少妇激情av| 中文字幕av成人在线电影| 欧美一区二区国产精品久久精品| 成人性生交大片免费视频hd| 日韩在线高清观看一区二区三区| 日本五十路高清| 日韩欧美三级三区| 日本欧美国产在线视频| 十八禁国产超污无遮挡网站| 九九在线视频观看精品| 色吧在线观看| 精品欧美国产一区二区三| 久久久精品大字幕| 亚洲成人久久性| 变态另类丝袜制服| 亚洲精品国产av成人精品| 久久精品国产鲁丝片午夜精品| 中文亚洲av片在线观看爽| 男女做爰动态图高潮gif福利片| 女人十人毛片免费观看3o分钟| 中出人妻视频一区二区| 欧美激情国产日韩精品一区| 2022亚洲国产成人精品| 亚洲无线在线观看| 国产视频内射| 少妇的逼水好多| ponron亚洲| 黑人高潮一二区| 美女cb高潮喷水在线观看| 亚洲图色成人| 人妻制服诱惑在线中文字幕| av国产免费在线观看| 欧美激情在线99| 嘟嘟电影网在线观看| 在线国产一区二区在线| 亚洲中文字幕一区二区三区有码在线看| 国产高清激情床上av| 亚洲高清免费不卡视频| 女的被弄到高潮叫床怎么办| 91狼人影院| 蜜臀久久99精品久久宅男| 男女边吃奶边做爰视频| 国产精品嫩草影院av在线观看| 亚洲天堂国产精品一区在线| 国产老妇女一区| 搡女人真爽免费视频火全软件| 精品久久久久久久末码| 天堂影院成人在线观看| 成人特级黄色片久久久久久久| 深夜精品福利| 精品欧美国产一区二区三| 亚洲丝袜综合中文字幕| 欧美又色又爽又黄视频| 综合色av麻豆| a级毛色黄片| 熟妇人妻久久中文字幕3abv| 3wmmmm亚洲av在线观看| 国产成人a∨麻豆精品| 欧美一级a爱片免费观看看| 麻豆久久精品国产亚洲av| 色哟哟·www| 国产美女午夜福利| av在线亚洲专区| 亚洲成人中文字幕在线播放| 久久6这里有精品| 亚洲不卡免费看| av天堂中文字幕网| 久久久久久国产a免费观看| 美女高潮的动态| 少妇高潮的动态图| www.色视频.com| 日本欧美国产在线视频| 69av精品久久久久久| 如何舔出高潮| 白带黄色成豆腐渣| 国产精品,欧美在线| 热99re8久久精品国产| 不卡视频在线观看欧美| 99久久精品热视频| 亚洲人与动物交配视频| 中国美白少妇内射xxxbb| 免费看a级黄色片| 狠狠狠狠99中文字幕| 久久精品国产鲁丝片午夜精品| 天堂中文最新版在线下载 | 亚洲真实伦在线观看| 卡戴珊不雅视频在线播放| 日本一本二区三区精品| 天天躁夜夜躁狠狠久久av| 午夜亚洲福利在线播放| 校园春色视频在线观看| 12—13女人毛片做爰片一| 色综合站精品国产| 99热这里只有是精品在线观看| 午夜免费男女啪啪视频观看| 亚洲精品成人久久久久久| 岛国在线免费视频观看| 国产又黄又爽又无遮挡在线| 三级国产精品欧美在线观看| 国产一区二区激情短视频| 日韩一区二区三区影片| 亚洲经典国产精华液单| 99在线人妻在线中文字幕| 夜夜夜夜夜久久久久| 欧美不卡视频在线免费观看| 丰满人妻一区二区三区视频av| 免费电影在线观看免费观看| 欧美xxxx黑人xx丫x性爽| 国产探花在线观看一区二区| 哪个播放器可以免费观看大片| 插阴视频在线观看视频| 黄色欧美视频在线观看| 亚洲精品亚洲一区二区| 美女内射精品一级片tv| 日韩大尺度精品在线看网址| 国产av在哪里看| 一边摸一边抽搐一进一小说| 人人妻人人看人人澡| 99久久精品热视频| 一级黄片播放器| 日本成人三级电影网站| 国产视频首页在线观看| av在线老鸭窝| 亚洲真实伦在线观看| 国产亚洲av嫩草精品影院| 天堂av国产一区二区熟女人妻| 亚洲精品日韩av片在线观看| 女人十人毛片免费观看3o分钟| 可以在线观看毛片的网站| 久久99蜜桃精品久久| 欧美成人a在线观看| 精品国内亚洲2022精品成人| 亚洲乱码一区二区免费版| 午夜福利视频1000在线观看| 欧美不卡视频在线免费观看| 久久久久久久久久黄片| 桃色一区二区三区在线观看| av在线蜜桃| or卡值多少钱| 欧美潮喷喷水| 97超视频在线观看视频| 中文字幕免费在线视频6| 日日啪夜夜撸| 麻豆国产av国片精品| 熟女电影av网| av卡一久久| 日韩国内少妇激情av| 夜夜爽天天搞| 人妻夜夜爽99麻豆av| 一级黄片播放器| 成人三级黄色视频| 99久久人妻综合| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | 此物有八面人人有两片| 国产一级毛片在线| 亚洲av.av天堂| 欧美潮喷喷水| 嫩草影院新地址| 日本成人三级电影网站| 好男人在线观看高清免费视频| 久久热精品热| 晚上一个人看的免费电影| 日韩制服骚丝袜av| 精华霜和精华液先用哪个| 亚洲欧美成人综合另类久久久 | 久久精品夜色国产| 不卡一级毛片| 一边摸一边抽搐一进一小说| 亚洲最大成人中文| 18禁在线播放成人免费| 国产精品电影一区二区三区| 菩萨蛮人人尽说江南好唐韦庄 | 一区二区三区免费毛片| 亚洲精华国产精华液的使用体验 | 一级av片app| 国产精品久久久久久亚洲av鲁大| 国内精品宾馆在线| 变态另类成人亚洲欧美熟女| 岛国在线免费视频观看| 久久精品国产亚洲av涩爱 | 国产亚洲精品av在线| 亚洲av成人av| 国产综合懂色| 国产蜜桃级精品一区二区三区| 日本三级黄在线观看| 在线观看一区二区三区| 蜜桃亚洲精品一区二区三区| 国产乱人视频| 精品一区二区三区视频在线| 日本黄大片高清| 日本一二三区视频观看| 欧美日韩综合久久久久久| 国产成人a∨麻豆精品| 国产精品99久久久久久久久| a级毛片免费高清观看在线播放| 黄色欧美视频在线观看| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | 毛片女人毛片| 亚洲av二区三区四区| 天美传媒精品一区二区| 色5月婷婷丁香| 久久久精品欧美日韩精品| 亚洲人成网站在线观看播放| 亚洲熟妇中文字幕五十中出| 丝袜喷水一区| 国产成人91sexporn| 尤物成人国产欧美一区二区三区| 九九久久精品国产亚洲av麻豆| 亚洲av电影不卡..在线观看| 日本色播在线视频| 久久草成人影院| 五月伊人婷婷丁香| 午夜福利成人在线免费观看| 少妇被粗大猛烈的视频| 国产中年淑女户外野战色| 日产精品乱码卡一卡2卡三| 国产精品一二三区在线看| 91午夜精品亚洲一区二区三区| 简卡轻食公司| 国产高潮美女av| 一本久久中文字幕| av福利片在线观看| videossex国产| 波野结衣二区三区在线| 六月丁香七月| 熟女电影av网| 毛片女人毛片| 中文字幕av成人在线电影| 一进一出抽搐动态| 免费看a级黄色片| 欧美成人精品欧美一级黄| 久久精品夜夜夜夜夜久久蜜豆| 亚洲不卡免费看| 免费不卡的大黄色大毛片视频在线观看 | 日韩中字成人| 蜜桃久久精品国产亚洲av| 男女下面进入的视频免费午夜| 午夜精品国产一区二区电影 | 日本五十路高清| 麻豆av噜噜一区二区三区| 欧美日韩在线观看h| 欧美成人精品欧美一级黄| 黄片wwwwww| 国产乱人偷精品视频| 久久中文看片网| 国产成人精品一,二区 | 级片在线观看| 深夜精品福利| 亚洲一区高清亚洲精品| 日韩精品青青久久久久久| 成年免费大片在线观看| 国产 一区精品| 极品教师在线视频| 热99在线观看视频| 日韩欧美国产在线观看| 色吧在线观看| 午夜精品一区二区三区免费看| 亚洲18禁久久av| 黄色欧美视频在线观看| 天堂√8在线中文| 国产在线男女| 成人漫画全彩无遮挡| 国产精品99久久久久久久久| 亚洲aⅴ乱码一区二区在线播放| 黄色日韩在线| 美女cb高潮喷水在线观看| 12—13女人毛片做爰片一| 秋霞在线观看毛片| 国产亚洲5aaaaa淫片| 亚洲无线在线观看| 中文字幕免费在线视频6| 一区福利在线观看| 日本在线视频免费播放| 丰满人妻一区二区三区视频av| 国产精品麻豆人妻色哟哟久久 | 天堂网av新在线| 成人特级av手机在线观看| 麻豆成人av视频| 91久久精品国产一区二区成人| 黄色日韩在线| 国产老妇伦熟女老妇高清| 男女下面进入的视频免费午夜| 欧美变态另类bdsm刘玥| 亚洲va在线va天堂va国产| 亚洲国产精品sss在线观看| 亚洲丝袜综合中文字幕| 久久午夜福利片| 久久99精品国语久久久| 又黄又爽又刺激的免费视频.| 两个人视频免费观看高清| 一进一出抽搐gif免费好疼| 亚洲国产精品国产精品| 免费大片18禁| 欧美精品一区二区大全| 亚洲不卡免费看| 99九九线精品视频在线观看视频| 亚洲一区二区三区色噜噜| 免费黄网站久久成人精品| 嫩草影院精品99| 成年女人看的毛片在线观看| 亚洲av不卡在线观看| a级毛片a级免费在线| 日本-黄色视频高清免费观看| 中出人妻视频一区二区| 久久久精品94久久精品| 亚洲中文字幕日韩| 成人亚洲精品av一区二区| 中文字幕熟女人妻在线| 亚洲一区二区三区色噜噜| 高清毛片免费看| 免费大片18禁| 22中文网久久字幕| 国产在视频线在精品| 亚洲av一区综合| 在线观看av片永久免费下载| 国产精品永久免费网站| 在线观看美女被高潮喷水网站| 国产爱豆传媒在线观看| 最近最新中文字幕大全电影3| 亚洲欧美日韩卡通动漫| 此物有八面人人有两片|