• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Zinc Porphyrin Sensitizers Containing Different Withdrawing and Donating Groups for Dye-sensitized Solar Cells: Design, Synthesis and Photovoltaic Properties①

    2018-05-11 11:20:41SONGJunLingLURuiFengLIAn
    結構化學 2018年4期

    SONG Jun-Ling LU Rui-Feng LI An

    a (School of Chemical & Material Engineering, Jiangnan University, Wuxi 214122, China)

    b (Division of Chemistry and Biological Chemistry, School of Physical & Mathematical Sciences, Nanyang Technological University, Singapore 637371, Singapore)

    1 INTRODUCTION

    Dye-Sensitized Solar Cells (DSSCs) have attracted considerable attention as conventional solid-state photovoltaic devices for the conversion of solar energy to electric power[1].Organic and inorganic dyes suitable for DSSCs have been under intensive investigation[1-3].The major ongoing research has focused on ruthenium (Ru) polypyridyl complexes,however, traditional ruthenium dyes are expensive and comparatively lower molar extinction coefficient,limiting their wide applications.Thus, it is necessary to find cheaper and safer alternatives for the dyes in DSSCs.Recently, some new types of organic dyes have been investigated as the sensitizers in solar cell.For example, Hara[4,5], and Yanagida[6]and coworkers reported an organic dye containing a donor (D)group (dialkylaminophenyl group) and an acceptor(A) group (cyanoacrylic acid), which exhibit good cell preformance.Another cheaper dyes, porphyrin derivatives, with large π-conjugation show interesting photo physical and electrochemical properties.The characteristic strong absorption intensity at Soret and moderate Q bands make porphyrin and their metal complexes as optimal candidates for DSSCs.In comparison with Ru-based DSSCs, porphyrinbased DSSCs could be fine-tuned through varying substitution patterns and/or complexing with metals.To date, diverse porphyrins with different donating or anchoring group have been designed, synthesized and employed in DSSCs and the maximum 13%conversion efficiencies were achieved[7-11].It has been demonstrated that dyes with more effective intramolecular charge transfer (ICT) molecules will show better cell performance, thus an effective strategy is to introduce strong electron donating(D) and electron-withdrawing (A) groups to get a D-π-A structure within the molecule.It is well-known that dyes with electron-rich triphenylamine-based derivatives as donor, such as diphenyl-benzenamine,and electron-withdrawing groups, such as cyanoacrylic acid, have been widely investigated[7-13].Furthermore, the introduction of strong electron withdrawing groups to a triphenylamine backbone can easily tune the absorption spectra of dye molecules, thus controlling the extent of intramolecular charge transfer.In addition, the positions and kinds of donor-acceptor substituents had significant affects on the efficiency of porphyrins in DSSCs[12,13].The stronger electron-accepting effects can be further obtained by introducing several cyano groups into a conjugated system.However, attaching the nitro group as one of the strong electron-withdrawing groups to a triphenylamine backbone is still rarely studied.Thus, optimization of these porphyrin dyes becomes increasingly important to enhance the overall device efficiency.The design and synthesis of highly efficient sensitizers is still a challenging task.

    Recently, we have prepared a series of metal-free porphyrin dyes with different D-A units.This study showed that by introducing appropriate substituent groups at appropriate position on the porphyrin ring,the cell performance could be dramatically improved due to the increase of the intramolecular charge separation[7].This push-pull type of dyes has appropriate structures that allow efficient charge separation.Moreover, a strong conjugation across the donor, bridge, and anchor which allows good electronic coupling between the LUMO of the dye and the TiO2conduction band should exist to ensure high charge transfer rates.

    In this article, as part of our efforts to develop more efficient porphyrin dyes, we designed a series of new push-pull type of metalloporphyrin derivatives as shown in Fig.1.Firstly, we performed Density Functional Theory (DFT) calculations to virtually screen candidate analogues and then we synthesized two new D2 and D3 porphyrin dyes containing N,N-diphenyl amine as the electron donor,carboxylic acid as the acceptor, and nitro group acting as the second withdrawing group for D3.The Zn(II)-5,10,15-tris phenyl-20-(4-carboxy methyl phenyl)-porphyrin (D1) was employed as a reference to evaluate the effects of these unsymmetrical metallo porphyrin analogues on the photovoltaic properties (Chart 1).Finally, D1, D2 and D3 are adsorbed onto TiO2electrodes to test cell performances in DSSCs.

    Chart 1. Chemical structures of porphyrin derivatives used in this study

    Fig.1. Molecular orbital energy levels (eV) of compounds 1~8 calculated using B3LYP/6-31G* in vacuo for various dyes originated from compared to results for a model of a TiO2 nanoparticle

    2 EXPERIMENTAL

    2.1 Calculation method

    All calculations were performed with the Gaussian 03[14]program package.The molecular structure of each compound in vacuo was fully optimized both at the ground and the first excited states using density functional theory (DFT) with the B3LYP density functional[14]and the 6-31G* basis set, along with the corresponding pseudopotential for the metal atom.All optimized geometries were subjected to vibrational frequency analysis, and characterized as a minimum (no imaginary frequencies).The time-dependent DFT (TD-DFT) at the level of B3LYP/6-31G*was carried out to study the excited state of selected molecules.The 20 lowest spin-allowed singlet transitions were involved to simulate the absorption spectra.The C-PCM[15]frameworks were used to describe the electrostatic solute-solvent interactions.The contribution of the singly excited state configurations to each electronic transition of the three metalloporphyrin analogues was calculated using the Swizard program, version 4.2[16].Graphical molecular orbitals were generated with the Gauss View software program (version 3.09)[14]and the molecular orbital contributions from the groups of atoms were obtained from Aomix program[16].

    2.2 Materials and instruments

    All chemicals were obtained from commercial sources and used without further purification.Unless otherwise noted, all reactions were carried out in oven dried glassware under an atmosphere of nitrogen and distilled solvents were transferred by syringe.Solvents and reagents were purified according to the standard procedure prior to use.Evaporation of organic solutions was achieved by rotary evaporation with the water bath temperature below 40 ℃.Product purification by flash column chromatography was accomplished using silica gel 60(0.010~0.063 nm).Technical grade solvents were used for chromatography and distilled prior to use.NMR spectra were recorded at room temperature on a 300 MHz Bruker ACF 300, 400 MHz Bruker DPX 400 and 500 MHz Bruker AMX 500 NMR spectrometers, respectively.The residual solvent signals were taken as the reference (7.26 ppm for1H NMR spectroscopy).Chemical shift (δ) is referred in terms of ppm, and coupling constants (J) are given in Hz.Following abbreviations classify the multiplicity: s =singlet, d = doublet, t = triplet, q = quartet, m =multiplet or unresolved, br = broad signal.Infrared spectra were recorded on a Bio-RAD FTS 165 FT-IR Spectrometer and reported in cm-1.Samples were prepared in thin film technique.HRMS (ESI) spectra were recorded on a Finnigan/MAT LCQ quadrupole ion trap mass spectrometer coupled with the TSP4000 HPLC system and the Crystal 310 CE system.Unless otherwise stated, all reactions were carried out in oven dried glassware under a nitrogen atmosphere and distilled solvents were transferred by syringe.Solvents and reagents were purified according to the standard procedure prior to use.Evaporation of organic solutions was achieved by rotary evaporation with the water bath temperature below 40 ℃.Product purification by flash column chromatography was accomplished using silica gel 60.Technical grade solvents were used for chromatography and distilled prior to use.NMR spectra were recorded at room temperature on a 300 MHz Bruker ACF 300, 400 MHz Bruker DPX 400 and 500 MHz Bruker AMX 500 NMR spectrometers, respectively.The residual solvent signals were taken as the reference (7.26 ppm for1H NMR spectroscopy).Infrared spectra were recorded on a Bio-RAD FTS 165 FT-IR Spectrometer and reported in cm-1.Samples were prepared in thin film technique.HRMS (ESI) spectra were recorded on a Finnigan/MAT LCQ quadrupole ion trap mass spectrometer coupled with the TSP4000 HPLC system and the Crystal 310 CE system.Absorption spectra were measured on a JASCO V-670 UV-Vis-Near IR spectrophotometer and photoluminescence analyses were performed on a Cary Eclipses fluorescence spectrometer.

    2.3 Syntheses of metalloporphyrins D1, D2 and D3

    The synthesis procedures of D1, D2 and D3 are shown in Schemes 1 and 2.Porphyrin P1 was synthesized by the cross condensation of phenyldiphyrromethane with 4-carbomethoxybenzaldehyde and benzaldehyde followed by hydrolysis under basic condition[12].Then porphyrin P1 was treated with Zn(OAc)2to obtain D1 (Scheme 1).Similarly,syn-thetic routes to D2 and D3 are displayed in Scheme 2.Structures of all new compounds were characterized by spectroschopic analyses including1H NMR, FT-IR and mass spectra.

    Scheme 1. Synthetic routes of D1

    Scheme 2. Synthetic routes of D2 and D3

    2.3.1 General procedure for the synthesis of 4-(10,15,20-triphenyl-21H,23H-porphin-5-yl)-phenyl acid-Zn (D1)

    To a solution of 4-(10,15,20-triphenyl-21H,23H-porphin-5-yl)-phenyl acid (0.06 g, 0.07 mmol) in methanol was added zinc acetate dihydrate (0.15 g,0.69 mmol) in methanol.The solution was stirred at 80 ℃ for 2 h.The solvent was removed by using a rotatory evaporator, and the residue dissolved in dichloromathane and passed through the filter paper.The filtrate was washed with water, dried over anhydrous sodium sulfate, and then the solvent was removed in vacuo to give the pure porphyrin product D1 (0.06 g, 90%) as a purple power.1H NMR (500 MHz, CDCl3): δ in ppm = 8.97~8.94 (m, 6H), 8.90(d, J = 4.2 Hz, 2H), 8.58 (bs, 2H), 8.31 (d, J = 8.9 Hz,2H), 8.22 (d, J = 7.2 Hz, 6H), 7.79~7.73 (m, 9H).IR (CHCl3): νmax= 3018, 2399, 1558, 1215, 758 cm-1.H RMS (ESI): m/z: calcd.for C45H29N4O2Zn:721.1582 [M]+; found: 721.1611.The syntheses of 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-phenyl acid methyl ester and 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro-benzoic acid methyl ester were carried out by a modified Aldler-Longo method[12].

    2.3.2 General procedure for the synthesis of 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-phenyl acid-Zn (D2)

    To a solution of 4-(15-N,N-diphenyl-benzenami-ne-10,20-biphenyl-21H,23H-porphin-5-yl)-phenyl acid 7 (0.1 g, 0.12 mmol) in methanol was added zinc acetate dihydrate (0.26 g, 1.2 mmol) in methanol.The solution was stirred at 80 ℃ for 2 h.The solvent was removed by using a rotatory evaporator, and the residue dissolved in dichloromathane and passed through the filter paper.The filtrate was washed with water, dried over anhydrous sodium sulfate, and then the solvent was removed in vacuo to give the pure porphyrin product D2 (0.1 g, 93%) as a purple power.1H NMR (500 MHz, CDCl3): δ in ppm = 9.04~9.03 (m, 1H),8.92~8.86 (m, 4H), 8.84 (d, J = 4.6 Hz, 2H), 8.58(d, J = 7.9 Hz, 2H), 8.40 (d, J = 6.1 Hz, 2H), 8.27~8.25 (m, 5H), 8.11 (d, J = 5.1 Hz, 1H), 7.83~7.79(m, 7H), 7.49 (d, J = 8.2 Hz, 1H), 7.45 (d, J = 4.2 Hz,5H), 7.28 (d, J = 7.5 Hz, 4H), 7.27~7.16 (m, 2H).IR (CHCl3): νmax= 3018, 2399, 1506, 1215, 756 cm-1.H RMS (ESI): m/z: calcd.for C57H38N5O2Zn:888.2317 [M]+; found: 888.2348.

    2.3.3 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro-benzoic acid methyl ester

    4-(Diphenylamino) 2-nitrobenzaldehyde (0.61 g,2.25 mmol) and methyl 4-formyl 3-nitrobenzoate(0.47 g, 2.25 mmol) was added to a dry roundbottomed flask and placed under high vacuum.Acetic acid (80 mL) was then added to the flask and mix the solid uniformly under nitrogen atmosphere.This reaction mixture was heated to reflux and 5-phenyldiphrromethane (1.0 g, 4.50 mmol) in acetic acid (20 mL) was added slowly over 20 min.The mixture was refluxed for 2 h, and then the crude product was evaporated to dryness under vacuum.The resulting crude product was purified by column chromatography on silica gel to give compound as a purple solid (0.4 g, 10%).1H NMR (500 MHz,CDCl3): δ in ppm = 9.08 (s, 1H), 9.01 (d, J = 4.5 Hz,2H), 8.87~8.85 (m, 4H), 8.61~8.59 (m, 3H), 8.38(d, J = 7.9 Hz, 1H), 8.34~8.23 (m, 4H), 8.07 (bs,2H), 7.81~7.75 (m, 6H), 7.47~7.35 (m, 10H),7.17~7.14 (m, 2H), 4.16 (s, 3H), –2.72 (s, 2H).IR(CHCl3): νmax= 3018, 2399, 1732, 1506, 1215, 756 cm-1.HRMS (ESI): m/z: calcd.for C58H41N6O4:885.3189 [M]+; found: 885.3207.

    2.3.4 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro-benzoic acid

    4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro-benzoic acid methyl ester (0.2 g) was dissolved in 75 mL of isopropanol and 10 mL of 2 M aq KOH was added slowly to the reaction mixture.This reaction mixture was refluxed for 6 hours, which was then cooled to room temperature.Once cooled, an equivalent amount of 1 M HCl was slowly added and the resulting solution (pH = 3)was extracted several times with ethyl acetate.The crude product was purified by column chromatography on silica gel to give the desired porphyrin product as a purple solid (0.18 g, 91%).1H NMR(500 MHz, CDCl3): δ in ppm = 9.02 (d, J = 5.5 Hz,2H), 9.00~8.87 (m, 5H), 8.61 (bs, 2H), 8.51 (bs,1H), 8.35 (d, J = 7.4 Hz, 1H), 8.28 (bs, 2H), 8.20 (d,J = 7.5 Hz, 2H), 8.09 (d, J = 8.2 Hz, 2H), 7.80 (bs,6H), 7.49~7.43 (m, 10H), 7.17 (t, J = 5.2 Hz, 2H), –2.72 (s, 2H).IR (CHCl3): νmax= 3018, 2399, 1506,1419, 1215, 756 cm-1.HRMS (ESI): m/z: calcd.for C57H39N6O4: 871.3033 [M]+; found: 871.3029.

    2.3.5 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro-benzoic acid-Zn (D3)

    To a solution of 4-(15-N,N-diphenyl-benzenamine-10,20-biphenyl-21H,23H-porphin-5-yl)-3-nitro benzoic acid (0.07 g, 0.07 mmol) in methanol was added zinc acetate dihydrate (0.15 g, 0.7 mmol) in methanol.The solution was stirred at 80 ℃ for 2 h.The solvent was removed by using a rotatory evaporator, and the residue dissolved in dichloromathane and passed through the filter paper.The filtrate was washed with water, dried over anhydrous sodium sulfate, and then the solvent was removed in vacuo to give the pure porphyrin product D3 (0.065 g, 86%)as a purple power.1H NMR (500 MHz, CDCl3): δ in ppm = 9.02 (d, J = 5.5 Hz, 2H), 9.00~8.87 (m, 5H),8.61 (bs, 2H), 8.51 (bs, 1H), 8.35 (d, J = 7.4 Hz, 1H),8.28 (bs, 2H), 8.20 (d, J = 7.5 Hz, 2H), 8.09 (d, J =8.2 Hz, 2H), 7.80 (bs, 6H), 7.49~7.43 (m, 10H),7.17 (t, J = 5.2 Hz, 2H).IR (CHCl3): νmax= 3018,2399, 1506, 1215, 756 cm-1.HRMS (ESI): m/z: calcd.for C57H37N6O4Zn: 933.2168 [M]+; found: 933.2153.

    2.4 Preparation of the metalloporphyrinmodified TiO2 electrode

    The 5.0 ± 0.2 μm thick films of nanocrystalline TiO2(Ti-nanoxide T/SP, Solaronix) were deposited on transparent conducting glass (SnO2:F, FTO, 15 Ω/square, Solaronix) with the doctor blade squeegee method.After heating to 450 ℃ for 2 h, TiO2substrates were cooled down and were prepared for dye loading.Then the TiO2plates (electrodes) were dipped into a 4 × 10-4M dye solution in THF and left for 2 h, and taken out and rinsed with methanol.A sandwich cell was prepared using the dye-sensitized electrode as the working electrode and a platinumcoated conducting glass electrode as the counter electrode.The counter electrode used was a 400 ? Pt fabricated by e-beam evaporation on a commercial indium tin oxide glass.The two electrodes separated by 50 μm thermal-plastic Suryln spacers were bonding together, and the electrolyte composed of 0.1 M I2, 0.1 M LiI, 0.5 M terbutylpyridine, and 0.6 M 1-hexyl-3-methylimidazolium iodide in methoxyacetonitrile was introduced between the electrodes by capillary action.

    2.5 Photovoltaic characterization

    A Sun 2000 solar simulator light source (Abettechnologies, U.S.A.) was used to give an irradiance of 100 mW·cm-2(the equivalent of one sun at air mass (AM) 1.5) at the surface of solar cells.The spectral output of the lamp was matched in the region of 350~750 nm with the aid of a sunlight filter (bettechnologies, U.S.A.) so as to reduce the mismatch between the simulated and the true solar spectra.Various incident light intensities were regu-lated with wavelength neutral wire mesh attenuators.The current-voltage characteristics of the cell under these conditions were obtained by applying external potential bias to the cell and measuring the generated photocurrent with a Keithley model 2440 digital source meter (Keithley, U.S.A.).This process was fully automated using lab tracer software.A similar data acquisition system was used to control the incident photon-to-collected electron conversion efficiency measurement with Oriel QE/IPCE Kit equipment.Under full computer control, light from a 300W xenon lamp (Oriel, U.S.A.) was focused through a monochromator (Oriel, U.S.A) onto the photovoltaic cell under test.The monochromator was incremented through the visible spectrum to generate the IPCE (λ) as defined by IPCE (λ) = 12400 Jsc/λφ,where λ is the wavelength, Jscis short-circuit photocurrent density (mA·cm-2), and φ is the incident radiative flux (mW·cm-2).

    3 RESULTS AND DISCUSSION

    3.1 DFT calculations

    Before any attempt of syntheses, we designed different electron donating and withdrawing groups,and filtered the appropriate candidates according to the electron density of the ground-state of metalloporphyrin derivatives.Fig.1 shows the relative mole-cular orbitals of metalloporphyrin analogs.A good candidate for dye molecules should have more positive HOMO level than the reduction potential of Iˉ/I3ˉ, at the same time; its LUMO level should be more negative than the conduction band of TiO2and an intense absorption in the visible region small band-gap and possess photo-induced intramolecular charge transfer properties.From Fig.1, compounds 4(D2) and 5 (D3) are the best candidates as dye sensitizer that satisfy these requirements.The ground state of compound 4 has LUMO at –2.18 eV right above the conduction band of TiO2, and has HOMO at –5.02 eV right below the Iˉ/I3ˉ reduction potential,while the ground state of compound 5’s LUMO is–2.73 eV and HOMO locates at –5.00 eV.Thus we selected compound 4(D2), 5(D3) to further study in the following experiments.Compound 2 (D1) has been chosen as reference to investigate the electron donating and withdrawing effects.

    To gain insight into the electronic structure of excited states, TD-B3LYP calculations were performed in tetrahydrofuran (THF) solution (C-PCM model) with geometries obtained in vacuo.Since molecular orbital (MO) contribution is important in determining the charge-separated states of metalloporphyrin analogues, we examine the molecular orbital contributions for D1, D2 and D3.The chemical structures of these three dyes are shown in Chart 1.The excited states molecular orbitals of the three compounds are plotted in Fig.2.There are similar electronic structures for the cores of D1, D2 and D3.The changes of the withdrawing and donating moieties cause the difference in electron densities on the anchor group (carboxyl group) in the LUMOs.The HOMO is localized on the donor subunit and the LUMO on the acceptor subunit,which suggests the formation of a charge-separated state between the donor and acceptor during photoinduced electron transfer.Table 1 shows the major portions of molecular orbital.The HOMO-LUMO gaps are calculated at 2.80, 2.64 and 2.37 eV for the excited states of D1, D2 and D3, respectively.When porphyrin ring substituents increase the splitting between the key filled orbitals or lift the degeneracy presenting in the unoccupied orbitals, the Q-transition increases in intensity[17-24].The HOMO of D1 is mainly localized on the porphyrin ring with few contributions from the benzoic acid moieties, the almost degenerate HOMO and HOMO-1 couples.The LUMO is mainly distributed on the porphyrin ring with small contributions from the benzoic acid moieties.The LUMO of D2 is similar to that of D1,whereas, its HOMO contains the porphyrin ring and substituted diphenylamino moieties.Obviously, there is spatial charge separation between HOMO and LUMO of D2.

    When anchoring group attached withdrawing group (nitro), the HOMO and LUMO of D3 are more separated than that of D2.The LUMO is close to the acceptor moieties, although nitro-withdrawing group has a few contributions, it can further stabilize the whole porphyrin molecule by the strong electronwithdrawing group.The HOMO is mainly localized on the porphyrin ring and substituted diphenylamino moieties, which is similar to D2.Obviously, the structure with a strong electron-donating group on one side and a strong electron-withdrawing group on the other side will facilitate the spatial charge separation.Importantly, the HOMOs of D2 and D3 were also partially distributed on the porphyrin ring,suggesting considerable interactions between the donor and acceptor entities.The locations of HOMO and LUMO of D2 and D3 also suggest the formation of a diphenyl-benzenamine-benzoic-acid/nitro-benzoic-acid (donor?+-acceptor?ˉ) charge-separated state during photoinduced charge transfer.The excitation energies of D1, D2 and D3 are shown in Table 2.Introducing Ph2N group in the donor (D) moiety and nitro-group in the acceptor (A) moiety can obviously increase the oscillator strength of the Q-band and also give rise to the solar spectrum overlap especially at the visible range.

    Fig.2. Molecular orbital diagrams of D1, D2 and D3

    Table 1. Molecular Orbital Contribution (MOC) of the Five Highest Occupied and Five Lowest Unoccupied Molecular Orbitals of D1, D2 and D3 Calculated at the B3LYP/6-31G* Level in THF Solution

    Table 2. Computed Excited Energies (eV), Oscillator Strengths (f) and Two Highest Electronic Transition Configurations for the Optical Transitions below 3.2 eV for D1, D2 and D3 in THF Calculated Using TD-B3LYP/6-31G*//B3LYP/6-31G* Using the C-PCM Framework

    3.2 UV-Vis absorption in solution and on the TiO2 film and fluorescence emission spectra

    The UV-Vis spectra of porphyrins in THF solvent are shown in Fig.3a.All the porphyrins compounds exhibit two distinct regions in their UV-Vis absorption spectra.The most intense absorption band, commonly referred to the Soret band, exists in the 400~430 nm region.The Soret band is clearly the most intense peak observed in Fig.3 for all the porphyrin sensitizers investigated in this study.The three compounds possess two Q bands in the 500~650 nm region.The series of bands between 400 and 650 nm attribute to π-π* absorptions of the conjugated macrocycle[21,25].Mainly, the Soret bands are corresponding to the S0→S2transition while the Q-bands are corresponding to the higher vibrational mode Q(1,0) and the lowest energy vibrational mode Q(0,0) of the S0→S1transition according to the calculation results of the excited state of the metalloporphyrins based on time-dependent density functional theory (TD-DFT)[25].The molar extinction coefficients increase in the order of D1 < D2 < D3 and the spectra have a slight red-shift in the same order.It is worth comparing our calculated electronic structure to the available spectroscopic data obtained in the context of the present investigation.The spectroscopic data are consistent with the trends in the HOMOs and LUMOs energies calculated for the excited states of D1, D2 and D3.As shown in Fig.3b,the absorption bands (ca.400~460 nm) of dyes attached to TiO2film are broaden and slightly redshifted for all three compounds compared to those observed in THF solution, implying that the aggregation of dye occurred on the TiO2surface which in turn leads to a red-shift (so-called J-aggregates[25]).Similar observation has been reported on carboxyphenyl zinc porphyrin binds on nanotube TiO2surfaces[21,24]and the J-aggregates of dye molecules were believed to be in a head-to-tail arrangement(end-to-end stacking) to form a J-dimer.

    The emission spectra of porphyrins D1, D2 and D3, shown in Fig.3c, were obtained at room temperature in THF solution.The emission maxima are independent of the excitation wavelength between 400 and 600 nm, and the spectra show characteristic double-shoulder peaks are at around 615 and 655 nm for D1, D2 and D3, similar to those reported in other zinc porphyrins[21,24,25].The emission maxima for D3 are slightly red-shifted compared to those for D2 and D1, which is consistent with the results on the UV-visible absorption spectra.The excitation spectra,monitored at 615 nm for zinc-porphyrin compounds,exhibit intense Soret and Q-bands that correspond with the grounds-state absorption spectra, indicating the presence of a single emitting species in each case.

    3.3 Photo electrochemical measurements in DSSCs

    IPCE measurements were performed to compare the efficiency of each sensitizer over the sunlight spectral region.The overall IPCE results for zinc porphyrin compounds are shown in Fig.4a.The system IPCE values were as high as 23% in the range of 400 to 450 nm.It was evident that upon comparison to the UV-Vis spectrum of the dye, electron injection in this region originated in the excitation of the Soret band.Q-band photoexcitation also contributed to the overall photocurrent at lower photon energies, with the IPCE values about 4%.A significant difference in the IPCE values between Soret and Q-band regions was acceptable considering the large differences in their respective extinction coefficients.The spectra of the metalloporphyrins adsorbed onto the 5-μm-thick TiO2electrodes are similar to those of the corresponding solution spectra but exhibit a small red shift due to the interaction of the anchoring groups with the surface (Fig.3b).The diphenyl-benzenamine-substituted metalloporphyrin dye sensitizers, D2, revealed far larger IPCE values than D1 systems.Maximum efficiencies were 23%and 16%, respectively, both of which occurred in the Soret band region.While photocurrent associated with Q-band absorption was small for D2 and D1 systems.The D3 system has the smallest IPCE values.As stated in the former section, dyes in this study aggregate on the TiO2surface and the absorption of D3 on TiO2was more broadened than the other two zinc dyes.From Fig.3b, there isn’t any aggregate absorption band in the photocurrent action spectrum of the zinc porphyrin compounds here,which suggests that aggregates do not contribute to any current generation.Consequently, we could conclude the photons absorbed by the monomers are most effective to produce charge-separated states as these are probably located at the interface between the stacks and the semiconductor as reported[7,26,27].

    Fig.3. UV-visible absorption spectra of the three zinc-porphyrins dyes in THF solution (a), adsorbed on TiO2 (b) and emission spectra in THF solution (c)

    Fig.4. (a) Photocurrent action spectra obtained with D1, D2, and D3 anchored on nanocrystalline TiO2 films.(b) J-V characteristics measured under the illumination of AM 1.5G full sunlight (100 mW/cm-2) for metalloporphyrins and N719

    3.4 Photovoltaic measurements

    The dye solution was prepared in THF solution (4× 10-4M).The hot TiO2electrodes (80 ℃) were immersed into the dye solution for 2 h.The colored films exhibited striking performance when tested in a photovoltaic cell in conjunction with a redox electrolyte.The results obtained for current voltage (I-V)curves for all systems when illuminated are shown in Fig.4b.The short-circuit current densities, Jsc, opencircuit voltages, Voc, fill factors, FF and power conversion efficiency of the cell are summarized in Table 3 under standard global AM 1.5 solar conditions.As expected, comparison of the metalloporphyrin-sensitized DSSC results, DSSC based on D2 shows the best performance (Jscof 2.83 mA·cm-2, Vocof 617 mV and FF of 0.459), which reaches 19%with respect to an N719-based device fabricated under the same conditions.Although the metalloporphyrin dye D3 shows the biggest intramolecular charge separation according to calculation results of the excited state of the metalloporphyrin, the poorest performance was obtained.Besides intramolecular charge separation, there are several other critical factors influencing the power conversation efficiency,such as band gap of porphyrin-sensitizers and aggregation degree of metalloporphyrin on TiO2.In D3 case, introduction of the nitro-group may facilitate the self-aggregation of metalloporphyrin by π-packing[13]and the aggregation on the TiO2surface[12,27,28], resulting in a decrease of the conversion efficiency.Comparison of these zinc-porphyrins and N719 shows that N719 performs better cell performance.The reason should be that the planar structure of zinc-porphyrins enhance the recombination of photo-generated electrons, leading to the smaller Voc and FF in zinc-porphyrin-sensitized solar cells[28-30].Meanwhile, the smaller Jscvalues for zinc-porphyrin dyes might be due to the dye aggregates harmful to electron injection, and some pushpull porphyrins likewise suffer from dye aggregation.Some research groups have also demonstrated that the moderate performance of the porphyrin sensitized solar cell ascribe to the porphyrin molecular aggregate onto the TiO2nanoparticle surface[28,30]and we should minimize the aggregation of porphyrin sensitizer when designing and synthesizing the dyes molecules.

    Table 3. Detailed Photovoltaic Parameters of Metalloporphyrin as Sensitizera

    4 CONCLUSION

    In summary, unsymmetrical push-pull type zincporphyrins, as dye photosensitizer applied in DSSCs as demonstrated, can facilitate the intramolecular charge separation.A set of metalloporphyrin derivatives have been synthesized to investigate the effect of substituted acceptor and donor groups on the optical and photovoltaic properties of metalloporphyrin.Together with DFT and TD-DFT calculations, we demonstrated that the TiO2solar cell with unsymmetrical donor-bridge-acceptor structures showed an improved cell performance compared to the D1 sensitized reference cell.Not only can intramolecular charge separation facilitate the improvement of power conversion efficiency of solar cell,but also the aggregations of metalloporphyrin on TiO2affect the cell performance.Because of the interplay of various factors, the best performance achieved of DSSC was D2 sensitized TiO2solar cell and yielded the maximal IPCE value of 23% and power conversion efficiency η of 0.80% under standard AM 1.5 conditions.Our results suggest that push-pull type zinc-porphyrins sensitizers with donor-bridge-acceptor (D-B-A) larger π-conjugating system could increase the photo to current efficiency and the posi-tion of withdrawing group is important for designing and synthesizing the effective metalloporphyrin-sensitized solar cell.We should minimize the aggre-gation of porphyrin sensitizer at the same time when designing and synthesizing the dye molecules.

    REFERENCES

    (1) (a) Gr?tzel, M.Photoelectrochemical cells.Nature2001, 414, 338?344.(b) Yella, A.; Mai, C.L.; Zakeeruddin, S.M.; Chang, S.N.; Hsieh, C.H.;Yeh, C.Y.; Gr?tzel, M.Molecular engineering of push-pull porphyrin dyes for highly efficient dye-sensitized solar cells: the role of benzene spacers.Angew.Chem.Int.Ed.2014, 53, 2973?2977.

    (2) (a) Eisenberg, R.; Nocera, D.G.Preface: overview of the forum on solar and renewable energy.Inorg.Chem.2005, 44, 6799?6801.(b) Armaroli,N.; Balzani, V.The future of energy supply: challenges and opportunities.Angew.Chem.Int.Ed.2007, 46, 52?66.(c) Lewis, N.; Nocera, D.Powering the planet: chemical challenges in solar energy utilization.Proc.Natl.Acad.Sci.USA2006, 103, 15729?15735.

    (3) (a) O’Regan, B.; Gr?tzel, M.A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2films.Nature1991, 353, 737?740.(b)Maufroy, A.; Favereau, L.; Anne, F.B.; Pellegrin, Y.; Blart, E.; Hissler, M.; Jacquemin D.; Odobel, F.Synthesis and properties of push-pull porphyrins as sensitizers for NiO based dye-sensitized solar cells.J.Mater.Chem.A2015, 3, 3908?3917.(c) Ladomenou, K.; Kitsopoulos, T.N.;Sharma, G.D.; Coutsolelos, A.G.The importance of various anchoring groups attached on porphyrins as potential dyes for DSSC applications.RSC Adv.2014, 4, 21379?21404.

    (4) Wu, C.H.; Chen, M.C.; Su, P.C.; Kuo, H.H.; Wang, C.L.; Lu, C.Y.; Tsai, C.H.; Wu, C.C.; In, C.Y.Porphyrins for efficient dye-sensitized solar cells covering the near-IR region.J.Mater.Chem.A2014, 2, 991?999.

    (5) Hara, K.; Sato, T.; Katoh, R.; Furube, A.; Yoshihara, T.; Murai, M.; Kurashige, M.; Shinpo, S.; Suga, S.; Ito, A.; Arakawa, H.Novel conjugated organic dyes for efficient dye-sensitized solar cells.Adv.Funct.Mater.2005, 15, 246?252.

    (6) Kitamura, T.; Ikeda, M.; Shigaki, K.; Inoue, T.; Anderson, N.A.; Ai, X.; Lian, T.; Yanagida, S.Phenyl-conjugated oligoene sensitizers for TiO2solar cells.Chem.Mater.2004, 16, 1806?1812.

    (7) Urbani, M.; Gr?tzel, M.; Nazeeruddin, M.K.; Torres, T.Meso-substituted porphyrins for dye-sensitized solar cells.Chem.Rev.2014, 114,12330?12396.

    (8) Stromberg, J.R.; Marton, A.; Kee, H.L.; Kirmaier, C.; Diers, J.R.; Muthiah, C.; Taniguchi, M.; Lindsey, J.S.; Bocian, D.F.; Meyer, G.J.; Olten,D.Examination of tethered porphyrin, chlorin, and bacteriochlorin molecules in mesoporous metal-oxide solar cells.J.Phys.Chem.C2007, 111,15464?15478.

    (9) Eu, S.; Hayashi, S.; Umeyama, T.; Matano, Y.; Araki, Y.; Mahori, H.Quinoxaline-fused porphyrins for dye-sensitized solar cells.J.Phys.Chem.C2008, 112, 4396?4405.

    (10) Mathew, S.; Yella, A.; Gao, P.; Humphry-Baker, R.; Curchod, B.F.; Ashari-Astani, N.; Tavernelli, I.; Rothlisberger, U.; Nazeeruddin, M.K.;Gr?tzel, M.Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers.Nature Chem.2014,6, 242?247.

    (11) (a) Campbell, W.M.; Burrell, A.K.; Officer, D.L.; Jolley, K.W.Porphyrins as light harvesters in the dye-sensitised TiO2solar cell.Coord.Chem.Rev.2004, 248, 1363?1379 and references therein.(b) Campbell, W.M.; Jolley, K.W.; Wagner, P.; Wagner, K.; Walsh, P.J.; Gordon, K.C.;Schmidt-Mende, L.; Nazeeruddin, M.K.; Wang, Q.; Gr?tzel, M.; Officer, D.L. Highly efficient porphyrin sensitizers for dye-sensitized solar cells.J.Phys.Chem.C2007, 111, 11760?11762.

    (12) Pasunootia, K.K.; Song, J.L.; Chai, H.; Amaladass, P.; Deng, W.Q.; Liu, X.W.Synthesis, characterization and application of trans-D–B–A-porphyrin based dyes in dye-sensitized solar cells.J.Photochem.Photobio.A2011, 218, 219?225.

    (13) Ambre, R.B.; Mane, S.B.; Chang, G.F.; Hung, C.H.Effects of number and position of meta and para carboxyphenyl groups of zinc porphyrins in dye-sensitized solar cells: structure-performance relationship.ACS Appl.Mater.Inter.2015, 7, 1879?1891.

    (14) (a) Frisch, M.J.; Trucks, G.W.; Schlegel, H.B.; Scuseria, G.E.; Robb, M.A.; Cheeseman, J.R.; Montgomery Jr., J.A.; Vreven, T.; Kudin, K.N.;Burant, J.C.; Millam, J.M.; Iyengar, S.S.; Tomasi, J.; Barone, V.; Mennucci, B.; Cossi, M.; Scalmani, G.; Rega, N.; Petersson, G.A.; Nakatsuji,H.; Hada, M.; Ehara, M.; Toyota, K.; Fukuda, R.; Hasegawa, J.; Ishida, M.; Nakajima, T.; Honda, Y.; Kitao, O.; Nakai, H.; Klene, M.; Li, X.; Knox,J.E.; Hratchian, H.P.; Cross, J.B.; Adamo, C.; Jaramillo, J.; Gomperts, R.; Stratmann, R.E.; Yazyev, O.; Austin, A.J.; Cammi, R.; Pomelli, C.;Ochterski, J.W.; Ayala, P.Y.; Morokuma, K.; Voth, G.A.; Salvador, P.; Dannenberg, J.J.; Zakrzewski, V.G.; Dapprich, S.; Daniels, A.D.; Strain,M.C.; Farkas, O.; Malick, D.K.; Rabuck, A.D.; Raghavachari, K.; Foresman, J.B.; Ortiz, J.V.; Cui, Q.; Baboul, A.G.; Clifford, S.; Cioslowski, J.;Stefanov, B.B.; Liu, G.; Liashenko, A.; Piskorz, P.; Komaromi, I.; Martin, R.L.; Fox, D.J.; Keith, T.; Al-Laham, M.A.; Peng, C.Y.; Nanayakkara,A.; Challacombe, M.; Gill, P.M.W.; Johnson, B.; Chen, W.; Wong, M.W.; Gonzalez, C.; Pople, J.A.Gaussian, Inc., Pittsburgh PA 2003,Gaussian 03, Revision B.01.(b) Dennington, R.; Keith, T.; Millam, J.; Eppinnett, K.; Hovell, W.L.; Gilliland, R.GaussView; Semichem: Shawnee Mission, KS 2003.

    (15) (a) Ditchfield, R.; Herhe, W.J.; Pople, A.J.Self-consistent molecular-orbital methods.IX.An extended Gaussian-Type basis for molecular-orbital studies of organic molecules.J.Chem.Phys.1971, 54 724?728.(b) Barone, V.; Cossi, M.Quantum calculation of molecular energies and energy gradients in solution by a conductor solvent model.J.Phys Chem.A1998, 102, 1995?2001.(c) Cossi, M.; Rega, N.; Scalmani, G.; Barone, V.Energies, structures, and electronic properties of molecules in solution with the C-PCM solvation model.J.Comput.Chem.2003, 24, 669?681.

    (16) (a) Gorelsky, S.I.AOMix:Program for Molecular Orbital Analysis, York University: Toronto 1997.(b) Gorelsky, S.I.; Lever, B.P.Electronic structure and spectra of ruthenium diimine complexes by density functional theory and INDO/S.Comparison of the two methods.J.Organomet.Chem.2001, 635, 187?196.

    (17) Tait, C.D.; Holten, D.; Barley, M.H.; Dolphin, D.; James, B.R.Picosecond studies of ruthenium(II) and ruthenium(III) porphyrin photophysics.J.Am.Chem.Soc.1985, 107, 1930?1934.

    (18) Wang, Q.; Campbell, W.M.; Bonfantani, E.E.; Jolley, K.W.; Officer, D.L.; Walsh, P.J.; Gordon, K.; Baker, H.R.; Nazeeruddin, M.K.; Gr?tzel,M.Efficient light harvesting by using green Zn-porphyrin-sensitized nanocrystalline TiO2films.J.Phys.Chem.B2005, 109, 15397?15409.

    (19) LeCours, S.M.; DiMagno, S.G.; Therien, M.J.Exceptional electronic modulation of porphyrins through meso-Arylethynyl groups.Electronic spectroscopy, electronic structure, and electrochemistry of [5,15-bis[(aryl)ethynyl]-10,20-diphenylporphinato]zinc(II) complexes.X-ray crystal structures of [5,15-bis[(4′-fluorophenyl)ethynyl]-10,20-diphenylporphinato]zinc(II) and 5,15-bis[(4?-methoxyphenyl)ethynyl]-10,20-diphenylporphyrin.J.Am.Chem.Soc.1996, 118, 11854?11864.

    (20) Wilgrome, L.R.The Colours of Life.Oxford University Press: New York 1997.

    (21) Kalyanasundaram, K.Photochemistry of Polypyridine and Porphyrin Complexes.Academic Press: London 1992.

    (22) Nazeeruddin, M.K.; Humphry-Baker, R.; Gr?tzel, M.; Murrer, B.A.Efficient near IR sensitization of nanocrystalline TiO2films by ruthenium phthalocyanines.Chem.Commun.1998, 719?720.

    (23) Gouterman, M.Study of the effects of substitution on the absorption spectra of porphin.J.Chem.Phys.1959, 30, 1139?1161.

    (24) Lo, C.F.; Luo, L.; Diau, E.W.G.; Chang, I.J.; Lin, C.Y.Evidence for the assembly of carboxyphenylethynyl zinc porphyrins on nanocrystalline TiO2surfaces.Chem.Commun.2006, 1430?1431.

    (25) Rochford, J.; Chu, D.; Hagfeldt, A.; Galoppini, E.Tetrachelate porphyrin chromophores for metal oxide semiconductor sensitization: effect of the spacer length and anchoring group position.J.Am.Chem.Soc.2007, 129, 4655?4665.

    (26) (a) Viseu, T.M.R.; Hungerford, G.; Ferreira, M.I.C.Optical and photophysical studies on porphyrin doped TiO2matrixes.J.Phys.Chem.B2002,106, 1853?1861.(b) Chang, C.W.; Chou, C.K.; Chang, I.J.; Lee, Y.P.; Diau, E.W.G.Relaxation dynamics of ruthenium complexes in solution,PMMA and TiO2films: the roles of self-quenching and interfacial electron transfer.J.Phys.Chem.C2007, 111, 13288?13296.

    (27) (a) Cherian, S.; Wamser, C.C.Adsorption and photoactivity of tetra(4-carboxyphenyl) porphyrin (TCPP) on nanoparticulate TiO2.J.Phys.Chem.B2000, 104, 3624?3629.(b) Jasieniak, J.; Johnston, M.; Waclawik, E.R.Characterization of a porphyrin-containing dye-sensitized solar cell.J.Phys.Chem.B2004, 108, 12962?12971.

    (28) Planells, M.; Forneli, A.; Martínez-Ferrero, E.; Sánchez-Díaz, A.; Sarmentero, M.A.; Ballester, P.; Palomares, E.; O’Regan B.C.The effect of molecular aggregates over the interfacial charge transfer processes on dye sensitized solar cells.Appl.Phys.Lett.2008, 92, 153506?03.

    (29) Mozer, A.J.; Wagner, P.; Officer, D.L.; Wallace, G.G.; Campbell, W.M.; Miyashita, M.; Sunahara, K.; Mori, S.The origin of open circuit voltage of porphyrin-sensitized TiO2solar cells.Chem.Commun.2008, 4741?4743.

    (30) Lee, C.W.; Lu, H.P.; Lan, C.M.; Huang, Y.L.; Liang, Y.R.; Yen, W.N.; Liu, Y.C.; Lin, Y.S.; Diau, E.W.G.; Yeh, C.Y.Novel zinc porphyrin sensitizers for dye-sensitized solar cells: synthesis and spectral, electrochemical, and photovoltaic properties.Chem.Eur.J.2009, 15, 1403?1412.

    毛片一级片免费看久久久久| 麻豆乱淫一区二区| 一级av片app| 亚洲三级黄色毛片| 久久人妻熟女aⅴ| 国产精品偷伦视频观看了| 精品酒店卫生间| 成人二区视频| 国产人妻一区二区三区在| 国产精品一二三区在线看| 妹子高潮喷水视频| 亚洲精品456在线播放app| 18禁动态无遮挡网站| 免费看av在线观看网站| 久久久久久久久久久丰满| 国产淫语在线视频| 一个人看视频在线观看www免费| 少妇高潮的动态图| 寂寞人妻少妇视频99o| 国产 一区精品| 美女主播在线视频| 亚洲国产精品专区欧美| 各种免费的搞黄视频| 国产视频首页在线观看| 黄色怎么调成土黄色| 亚洲va在线va天堂va国产| 欧美xxxx性猛交bbbb| 欧美日韩亚洲高清精品| 国产久久久一区二区三区| 男人添女人高潮全过程视频| 国产伦在线观看视频一区| 久久久久久久久久人人人人人人| 中文天堂在线官网| 一区二区三区精品91| 日韩精品有码人妻一区| av又黄又爽大尺度在线免费看| 国产精品精品国产色婷婷| 国产免费视频播放在线视频| 日本欧美国产在线视频| 美女高潮的动态| 日日啪夜夜爽| 亚洲人成网站在线观看播放| 色综合色国产| 久久久久久九九精品二区国产| 久久99蜜桃精品久久| 亚洲欧洲国产日韩| 两个人的视频大全免费| 王馨瑶露胸无遮挡在线观看| 国产综合精华液| 久久ye,这里只有精品| 亚洲内射少妇av| 久久 成人 亚洲| 麻豆乱淫一区二区| 国产又色又爽无遮挡免| 91狼人影院| 日韩av不卡免费在线播放| 在线观看一区二区三区| 日韩大片免费观看网站| 久久久国产一区二区| 一级a做视频免费观看| 激情 狠狠 欧美| 日本av手机在线免费观看| 国语对白做爰xxxⅹ性视频网站| 三级国产精品片| 丝瓜视频免费看黄片| 尤物成人国产欧美一区二区三区| 国产色婷婷99| 久久精品国产亚洲av涩爱| 九九在线视频观看精品| 日韩一本色道免费dvd| 日韩伦理黄色片| 国产亚洲午夜精品一区二区久久| 毛片一级片免费看久久久久| 精品人妻熟女av久视频| av黄色大香蕉| 人妻一区二区av| 精品熟女少妇av免费看| 亚洲欧美精品专区久久| 成年女人在线观看亚洲视频| 天堂8中文在线网| 亚洲精品第二区| 精品亚洲乱码少妇综合久久| 大香蕉久久网| 国产爱豆传媒在线观看| 久久久久久伊人网av| 一区二区三区四区激情视频| 久久精品夜色国产| 直男gayav资源| 麻豆成人av视频| 欧美三级亚洲精品| 我的女老师完整版在线观看| 国产免费视频播放在线视频| 国产精品蜜桃在线观看| 国产在线一区二区三区精| 午夜免费观看性视频| av.在线天堂| 最新中文字幕久久久久| 性色avwww在线观看| 国产视频内射| 午夜免费男女啪啪视频观看| 日本-黄色视频高清免费观看| 久久99蜜桃精品久久| 久久久精品94久久精品| 婷婷色综合www| 91精品国产九色| 高清视频免费观看一区二区| 欧美精品一区二区大全| 一本—道久久a久久精品蜜桃钙片| 欧美性感艳星| 18禁裸乳无遮挡免费网站照片| 成年人午夜在线观看视频| 欧美 日韩 精品 国产| 国产色婷婷99| 黄色日韩在线| 日韩av在线免费看完整版不卡| 久久99热这里只有精品18| 搡老乐熟女国产| 国语对白做爰xxxⅹ性视频网站| 干丝袜人妻中文字幕| 成人综合一区亚洲| 国产伦理片在线播放av一区| 两个人的视频大全免费| 又粗又硬又长又爽又黄的视频| 欧美精品亚洲一区二区| 国产毛片在线视频| 十分钟在线观看高清视频www | 欧美精品一区二区大全| 日本av手机在线免费观看| 欧美成人午夜免费资源| 国产精品久久久久久久电影| 久久综合国产亚洲精品| 国产亚洲av片在线观看秒播厂| 国产高潮美女av| 噜噜噜噜噜久久久久久91| 国产一级毛片在线| 亚洲欧美一区二区三区黑人 | 51国产日韩欧美| 极品少妇高潮喷水抽搐| 日日啪夜夜撸| 成人无遮挡网站| 精品视频人人做人人爽| 日本午夜av视频| 一区二区三区乱码不卡18| 男人添女人高潮全过程视频| 日本色播在线视频| 午夜福利影视在线免费观看| 欧美日本视频| 99热网站在线观看| 丝袜脚勾引网站| 国产毛片在线视频| 中国三级夫妇交换| 欧美精品亚洲一区二区| 免费av不卡在线播放| 国产亚洲91精品色在线| 午夜精品国产一区二区电影| 我的老师免费观看完整版| 久久ye,这里只有精品| 如何舔出高潮| 免费观看在线日韩| 视频中文字幕在线观看| 一级爰片在线观看| 亚洲av中文av极速乱| 综合色丁香网| 一个人免费看片子| 一区在线观看完整版| 国模一区二区三区四区视频| 国产精品人妻久久久久久| 五月伊人婷婷丁香| 一本久久精品| 色5月婷婷丁香| 搡女人真爽免费视频火全软件| 亚洲综合精品二区| 99国产精品免费福利视频| 久久热精品热| 一区二区三区免费毛片| 日韩成人伦理影院| 国内揄拍国产精品人妻在线| 91精品伊人久久大香线蕉| 18禁动态无遮挡网站| 午夜视频国产福利| 成人18禁高潮啪啪吃奶动态图 | 国产在线一区二区三区精| 亚洲人成网站高清观看| 久久久亚洲精品成人影院| 久久ye,这里只有精品| 少妇熟女欧美另类| 国产色爽女视频免费观看| 亚洲在久久综合| 亚洲美女黄色视频免费看| av又黄又爽大尺度在线免费看| 国产免费视频播放在线视频| 国产久久久一区二区三区| 欧美高清成人免费视频www| 亚洲精品视频女| a级毛片免费高清观看在线播放| 欧美性感艳星| 超碰av人人做人人爽久久| 狠狠精品人妻久久久久久综合| 观看免费一级毛片| 蜜桃在线观看..| 成人毛片a级毛片在线播放| 精品午夜福利在线看| 狂野欧美白嫩少妇大欣赏| 精品一品国产午夜福利视频| 欧美亚洲 丝袜 人妻 在线| 日韩成人av中文字幕在线观看| 国产无遮挡羞羞视频在线观看| 久久精品国产亚洲av涩爱| 国产真实伦视频高清在线观看| 男女边吃奶边做爰视频| 欧美 日韩 精品 国产| 九草在线视频观看| 国产成人91sexporn| 99九九线精品视频在线观看视频| 美女福利国产在线 | av国产免费在线观看| 网址你懂的国产日韩在线| 身体一侧抽搐| 一级二级三级毛片免费看| 精品一区二区三区视频在线| 在线观看免费日韩欧美大片 | 女的被弄到高潮叫床怎么办| 一个人看视频在线观看www免费| 亚洲av成人精品一二三区| 一级毛片电影观看| 性色av一级| 尾随美女入室| 看非洲黑人一级黄片| 亚洲精品视频女| 夫妻午夜视频| 大片免费播放器 马上看| 免费看日本二区| 精品酒店卫生间| 爱豆传媒免费全集在线观看| 男人爽女人下面视频在线观看| 免费看不卡的av| 亚洲熟女精品中文字幕| 日本av手机在线免费观看| 久久久久久久国产电影| 精品国产一区二区三区久久久樱花 | 九九爱精品视频在线观看| 久久久久国产网址| 只有这里有精品99| 人人妻人人添人人爽欧美一区卜 | 欧美最新免费一区二区三区| av免费在线看不卡| 国产综合精华液| 国产欧美日韩一区二区三区在线 | 久久影院123| 欧美精品亚洲一区二区| 欧美激情极品国产一区二区三区 | 波野结衣二区三区在线| 在线观看免费日韩欧美大片 | 97热精品久久久久久| 99热全是精品| 国产日韩欧美亚洲二区| 亚洲欧美日韩东京热| 亚洲精品亚洲一区二区| 亚洲精品乱久久久久久| 好男人视频免费观看在线| 日本欧美视频一区| 国产精品成人在线| av国产久精品久网站免费入址| 国产欧美日韩精品一区二区| 久久久久精品久久久久真实原创| 最近2019中文字幕mv第一页| 国产精品一区二区三区四区免费观看| 爱豆传媒免费全集在线观看| 国产一级毛片在线| 亚洲精华国产精华液的使用体验| 亚洲第一区二区三区不卡| 久久国产乱子免费精品| 色视频在线一区二区三区| 精品99又大又爽又粗少妇毛片| 免费黄网站久久成人精品| 乱系列少妇在线播放| 99久久精品一区二区三区| 亚洲电影在线观看av| 亚洲自偷自拍三级| 99久国产av精品国产电影| 性色av一级| 成年人午夜在线观看视频| 国产 精品1| 亚洲国产日韩一区二区| 久久久久精品久久久久真实原创| a 毛片基地| 国产精品一区二区三区四区免费观看| 夫妻午夜视频| 尤物成人国产欧美一区二区三区| 国内少妇人妻偷人精品xxx网站| 高清不卡的av网站| 久久久a久久爽久久v久久| 男女边摸边吃奶| 久久国产亚洲av麻豆专区| 欧美 日韩 精品 国产| 小蜜桃在线观看免费完整版高清| 日本-黄色视频高清免费观看| av免费在线看不卡| 日韩欧美精品免费久久| 国产爽快片一区二区三区| 亚洲久久久国产精品| 最近最新中文字幕免费大全7| 一本一本综合久久| 青春草视频在线免费观看| 女性生殖器流出的白浆| 看非洲黑人一级黄片| 亚洲av免费高清在线观看| 精品少妇黑人巨大在线播放| 国产精品秋霞免费鲁丝片| 久久人人爽人人片av| 成人一区二区视频在线观看| 精华霜和精华液先用哪个| 国产 精品1| 欧美最新免费一区二区三区| av一本久久久久| 精品亚洲乱码少妇综合久久| 国产高潮美女av| 精品久久久久久久末码| 久久这里有精品视频免费| 国产精品无大码| 春色校园在线视频观看| 国产伦理片在线播放av一区| 日本wwww免费看| 女性被躁到高潮视频| 尾随美女入室| 亚州av有码| 国产无遮挡羞羞视频在线观看| 人人妻人人爽人人添夜夜欢视频 | 色视频www国产| 亚洲av二区三区四区| 99久久精品热视频| 校园人妻丝袜中文字幕| 国产成人精品一,二区| 午夜福利网站1000一区二区三区| 亚洲精品色激情综合| 国产老妇伦熟女老妇高清| 国产在线男女| 观看av在线不卡| 久久午夜福利片| 乱码一卡2卡4卡精品| 欧美日韩综合久久久久久| 亚洲av福利一区| 国产无遮挡羞羞视频在线观看| 精华霜和精华液先用哪个| 亚洲天堂av无毛| 多毛熟女@视频| 国产精品麻豆人妻色哟哟久久| 日本av免费视频播放| 美女内射精品一级片tv| 美女中出高潮动态图| 精品人妻偷拍中文字幕| 亚洲精品国产成人久久av| 中文字幕免费在线视频6| 久久久欧美国产精品| 涩涩av久久男人的天堂| h日本视频在线播放| 久久久成人免费电影| 日本一二三区视频观看| 国产在线男女| 精品久久久久久电影网| 一级黄片播放器| 看免费成人av毛片| 九色成人免费人妻av| 国产91av在线免费观看| 欧美三级亚洲精品| 久久精品久久精品一区二区三区| 中文在线观看免费www的网站| 两个人的视频大全免费| 中国国产av一级| videos熟女内射| 免费人妻精品一区二区三区视频| 亚洲aⅴ乱码一区二区在线播放| 成人一区二区视频在线观看| 日韩中字成人| 中文乱码字字幕精品一区二区三区| 国产精品99久久久久久久久| 黑人高潮一二区| 99热这里只有是精品在线观看| 黄色配什么色好看| 久久久久视频综合| 婷婷色av中文字幕| 在线看a的网站| av在线播放精品| 亚洲三级黄色毛片| 美女主播在线视频| 久久久久精品性色| 国产欧美亚洲国产| 亚洲国产欧美人成| 久久精品国产a三级三级三级| 亚洲激情五月婷婷啪啪| videossex国产| 亚洲,欧美,日韩| 在线观看三级黄色| 纯流量卡能插随身wifi吗| 午夜福利高清视频| 18禁在线无遮挡免费观看视频| 午夜免费男女啪啪视频观看| 一级毛片 在线播放| 香蕉精品网在线| 在线观看av片永久免费下载| 啦啦啦视频在线资源免费观看| 涩涩av久久男人的天堂| 身体一侧抽搐| 一区二区三区四区激情视频| 亚洲三级黄色毛片| 国内揄拍国产精品人妻在线| 亚洲欧美一区二区三区国产| 波野结衣二区三区在线| 成人漫画全彩无遮挡| 国产成人a区在线观看| 美女主播在线视频| 97精品久久久久久久久久精品| 高清午夜精品一区二区三区| 久久精品久久精品一区二区三区| 精品一区二区三卡| 26uuu在线亚洲综合色| 秋霞在线观看毛片| 成人高潮视频无遮挡免费网站| 欧美少妇被猛烈插入视频| 97在线人人人人妻| av免费观看日本| 国产 精品1| 精品国产露脸久久av麻豆| 免费久久久久久久精品成人欧美视频 | 亚洲天堂av无毛| 最近2019中文字幕mv第一页| 日本与韩国留学比较| 国产精品蜜桃在线观看| 国产精品一及| 久久久精品免费免费高清| 美女xxoo啪啪120秒动态图| 人妻制服诱惑在线中文字幕| 精品久久久精品久久久| 交换朋友夫妻互换小说| 欧美3d第一页| 亚洲国产av新网站| 欧美97在线视频| 激情五月婷婷亚洲| 看免费成人av毛片| 日本一二三区视频观看| 亚洲av中文av极速乱| 免费看日本二区| 九九久久精品国产亚洲av麻豆| 国产色爽女视频免费观看| 精品久久国产蜜桃| 久久av网站| 国产免费视频播放在线视频| 天堂中文最新版在线下载| 国产 精品1| 国产午夜精品久久久久久一区二区三区| 国产v大片淫在线免费观看| 久久久成人免费电影| 久久国产精品男人的天堂亚洲 | 三级经典国产精品| 亚洲四区av| 久久久久久九九精品二区国产| 韩国高清视频一区二区三区| 一区二区av电影网| 日本欧美视频一区| 成人漫画全彩无遮挡| 国产精品.久久久| 春色校园在线视频观看| 91午夜精品亚洲一区二区三区| 一级av片app| 少妇人妻久久综合中文| 免费人成在线观看视频色| 成人18禁高潮啪啪吃奶动态图 | 亚洲精品一区蜜桃| 久久人人爽人人爽人人片va| 高清视频免费观看一区二区| 日韩欧美精品免费久久| 嫩草影院入口| kizo精华| 美女内射精品一级片tv| 国产永久视频网站| 国产精品久久久久久久久免| 一区二区av电影网| 在线观看免费视频网站a站| 久久综合国产亚洲精品| 99视频精品全部免费 在线| 熟女人妻精品中文字幕| 3wmmmm亚洲av在线观看| 99热这里只有是精品50| 国产精品女同一区二区软件| 精品国产一区二区三区久久久樱花 | 又爽又黄a免费视频| 日韩av免费高清视频| 欧美激情国产日韩精品一区| 最近手机中文字幕大全| 亚洲真实伦在线观看| 久久精品国产亚洲av天美| 免费久久久久久久精品成人欧美视频 | 国产精品蜜桃在线观看| 成人国产av品久久久| 简卡轻食公司| 婷婷色综合大香蕉| 国产色婷婷99| 久久青草综合色| 亚洲第一区二区三区不卡| 麻豆乱淫一区二区| 久久久久久伊人网av| 80岁老熟妇乱子伦牲交| 一二三四中文在线观看免费高清| av在线蜜桃| a级毛色黄片| 国产精品秋霞免费鲁丝片| 精品视频人人做人人爽| 欧美一区二区亚洲| 国产精品一区二区在线观看99| a 毛片基地| 日本色播在线视频| tube8黄色片| 国产高清国产精品国产三级 | 成年人午夜在线观看视频| 91aial.com中文字幕在线观看| 精品亚洲成国产av| 国产精品一区二区在线不卡| 亚洲成人av在线免费| 免费黄色在线免费观看| 国产一区二区在线观看日韩| 亚洲三级黄色毛片| 亚洲,一卡二卡三卡| 熟女电影av网| 人妻系列 视频| 日日撸夜夜添| kizo精华| 亚洲精品国产av成人精品| 男人舔奶头视频| 亚洲国产精品国产精品| 久久久久人妻精品一区果冻| 波野结衣二区三区在线| 最近2019中文字幕mv第一页| 日韩制服骚丝袜av| 欧美老熟妇乱子伦牲交| 婷婷色综合www| 街头女战士在线观看网站| 日日啪夜夜爽| 激情 狠狠 欧美| 欧美区成人在线视频| a级毛色黄片| 成人国产av品久久久| 久久久久久久久久久丰满| 97在线视频观看| 三级经典国产精品| 一级黄片播放器| 99热网站在线观看| 色5月婷婷丁香| 久久国内精品自在自线图片| 亚洲天堂av无毛| 联通29元200g的流量卡| 美女福利国产在线 | 男人和女人高潮做爰伦理| 亚洲精品日韩av片在线观看| tube8黄色片| 日本av手机在线免费观看| 我的老师免费观看完整版| 国产精品蜜桃在线观看| 男女边吃奶边做爰视频| 国产男女超爽视频在线观看| 天堂俺去俺来也www色官网| 亚洲精品乱久久久久久| 伊人久久精品亚洲午夜| 国产片特级美女逼逼视频| 日韩中字成人| av视频免费观看在线观看| 欧美成人一区二区免费高清观看| 一区二区三区精品91| 丝袜喷水一区| 啦啦啦中文免费视频观看日本| 边亲边吃奶的免费视频| 亚洲精品乱码久久久v下载方式| 狂野欧美激情性xxxx在线观看| 精品国产一区二区三区久久久樱花 | 久久精品夜色国产| 天天躁夜夜躁狠狠久久av| 免费在线观看成人毛片| 日本与韩国留学比较| 久热久热在线精品观看| 日韩不卡一区二区三区视频在线| 夜夜爽夜夜爽视频| 男女边吃奶边做爰视频| av视频免费观看在线观看| 在线观看美女被高潮喷水网站| 久久鲁丝午夜福利片| 亚洲,一卡二卡三卡| 欧美日韩一区二区视频在线观看视频在线| 亚洲欧美清纯卡通| 成人亚洲精品一区在线观看 | h视频一区二区三区| 久久青草综合色| 国产成人精品久久久久久| 久久99热6这里只有精品| 高清日韩中文字幕在线| 精品一品国产午夜福利视频| 国产黄片视频在线免费观看| 亚洲第一区二区三区不卡| 麻豆乱淫一区二区| 日本vs欧美在线观看视频 | 纯流量卡能插随身wifi吗| 久久精品久久久久久噜噜老黄| 免费黄网站久久成人精品| xxx大片免费视频| 欧美+日韩+精品| 亚洲婷婷狠狠爱综合网| 插逼视频在线观看| 亚洲婷婷狠狠爱综合网| 纵有疾风起免费观看全集完整版| 国产精品国产三级国产专区5o| 国产一区二区三区av在线| 亚洲av在线观看美女高潮| 2018国产大陆天天弄谢| 亚洲精华国产精华液的使用体验| 嫩草影院新地址| h日本视频在线播放| 在线 av 中文字幕|