福特公司工人住宅，科隆，德國

建筑設計：Archplan有限公司

Architect: Archplan GmbH

福特公司工人住宅，科隆，德國

建筑設計：Archplan有限公司

Architect: Archplan GmbH

"Fordsiedlung" der LEG, Cologne, Germany, 2010

1 鳥瞰/Aerial view

2 改造前/Before renovation

3 改造后/After renovation

4 外景/Exterior view

這片居民區在1950年代早期建成，是距該地3km遠的福特工廠的工人住宅。住宅區南鄰科隆市中心，位于一片發展完善的城市地段內。社區附近遍布古樹的開放空間為居民提供了良好的活動場所。除了1970年代時建筑的木制窗框被更換為PVC窗框外，該住宅區自1950年代以來未經歷過任何現代化改造。

整個社區由11個1950年代建成的公寓街塊組成，總居住面積為14,211m2包含：300套平均47m2的公寓，每套公寓靠單個燃煤鍋爐進行供暖；少數公寓有單獨的微型陽臺；衛生和電力系統都已經接近報廢。要繼續使用，這片住宅區必須接受全面更新或者被拆毀重建。

再開發項目的目的是將這片老舊住宅改造為一個現代化的、高度節能的居住小區。主要的目標包括：通過聯通2～3套公寓來擴大目前過于局促的戶型面積；為每套公寓提供陽臺；減少公寓內的隔斷；更新基礎設施，包括所有衛生間；借助廚房花園、小活動場和聚會空間來營造更好的公共空間。

因為科隆無法為福特住宅內的居民提供300套臨時居所，所以改造工程必須在不完全遷移居民的情況下開展。然而，每戶居民都需要搬一次家，從舊房搬入一個改造后的新房。為了提高住房的市場價值，設計必須盡量增加住房的容積率。因此，所有房屋在3層的基礎上被加蓋為了4層(部分還被加建到了5層)。

這樣一來，福特住宅區就在原來的300套住宅的基礎上多出了6300m2的居住面積（81套新公寓），達到了20,500m2的總居住面積。新的產權持有者們獲得了新的可靈活布置的居住公寓、寬敞的陽臺和落地窗。

從節能的角度看，該項目也達到了相當可觀的效果：高效的外墻、地下室和屋頂隔熱；新裝的吸熱玻璃門窗；能量流失控制措施；每戶加裝了換氣系統，頂層還加裝了熱回收系統；由冷凝式燃氣技術和太陽能提供的暖氣和熱水，其中，真空太陽能板被安裝在南向的屋頂上（1150m2）； 45,000L儲量的地板下能源中央存儲池；供暖能耗減少85%；CO2排放量減少94%。

5 剖面/Section

對舊有建筑施工過程的調研發現，住宅樓的頂層屋頂無法承受額外的重量。因此，加建采用了交叉層接木結構方案。懸挑部分伸出原建筑屋頂45cm，不僅創造了一個1000m2的附加居住空間，還調和了新舊建筑之間的立面形式關系（其色彩設計受到了地中海風格的影響，為住宅區呈現出嶄新的面貌）。預制的木結構框架在裝配前就已經裝有了窗戶、室內飾面和兩層室外抹灰。預制構件的最長邊為12m。長80m的公寓街塊用1周時間搭建完成，其間包含從拆除原有屋頂?shù)酵瓿赡窘Y(jié)構框架搭建的全部過程。

這樣的施工方案還實現了舊有建筑改造與新加的四層體塊加建的并行施工。在舊有建筑部分的施工結束之后，管道和基礎設施才與加層部分相連接。因此，舊建筑的改造工程得以獨立于加層的建造工程。

由于舊有建筑的頂層沒有設置規則的樓梯交通，改造項目還為建筑加裝了一個新的大型木制豎向交通系統。

除去室外設施的施工，11個街塊的改造工程總共耗時18個月?！酰◤堅Ｏ?譯）

6 外景/Exterior view

7 五層平面渲染/Rendering flat 4th floor

8 建造中/Under construction

The settlement was built in the early fifties as workman's dwellings for the Ford factory which is only 3 km away. The estate is a grown urban quarter(in Cologne “Veedel”) at the northern gate to the city centre. The open space, with a number of old trees,provides space for activities of the neighbourhood residents. Since the 1950s nothing has been done or modernised except the replacement of wooden windows with PVC windows in the 70s.

The complex was made of 11 blocks of flats from the early 50s for 14,211m2 of living area: in total 300 flats with an average of 47m2 each, heated with single coal-burning stoves; only a few got mini balconies; the sanitary and the electric installations were obsolete. The complex had to be totally renovated or demolished and built anew.

The aim of developing the estate was to change the quarter into a modern, highly energy efficient housing estate. The main goals were: change very small flats into family flats by merging 3 to two flats; providing balconies; reduce barriers in the flats; renew the technical installations including all bathrooms; develop open space with kitchen gardens, playgrounds and meeting points.

As it was impossible in Cologne to find 300 alternate flats to move the residents, a renovation without moving the inhabitants totally to another area had been decided. The idea was that every resident had to move once, from the old flat to a renovated one. To increase the value of the object, the plot area had to be upgraded to a maximum of living space in proportion to the area of the property. The solution was the heightening of the 3-storey buildings by a 4th level (and a partial 5th floor).

So, more than 6300m2 of living space (81 new flats) was added to the 300 existing flats, the total becomes more than 20,500m2 area for habitation.New flexible flats for new stakeholders were created,as well as generous balconies and "French windows".

From the point of view of energy conservation,significance outputs have been achieved: highly efficient insulation of external walls, basement and top floor ceilings; new windows and doors with heat absorbing glass; reduction of energy loss; provision of air ventilation systems for each flat, with heat recovery in the top floor flats. Heating and warm water supply by gas condensing boiler technology and solar power comprised: installation of vacuum solar panels on south facing roofs (1150m2); central storage of energy of the solar panels in under floor tanks with 45,000L volume; reduction of heating energy demand by 85%;reduction of CO2emission by 94%.

As a result of the investigation of the construction of the existing buildings, it was found that the highest ceiling was not capable of withstanding additional load. The solution was a cross-laminated timber construction. Bridging the last ceiling with an overhang of 45cm. This overhang not only created 1,000m2 additional living space, in relation to the level below, but also generated a solution for the changeover between the facade of the old and the new building parts(with colour design inspired by Mediterranean ambiance highlighting the new appearance of the estate). The prefabricated timber frame construction was delivered including the windows, the finished surface on the inside and the first two layers of plaster on the outside. It came to a maximum length of 12 metres. The whole construction for an 80m block of flats took about one week to erect, from the deconstruction of the roof to finishing the timber frame construction.

This construction method also allowed the renovation of the existing building without constant access to the fourth floor construction. Only when the renovation of the existing part of the building was finished, were the line sections (conduits)connected between the existing building and the new storey. So independent of the erection of the new storey, the renovation could be done.

As the last level of the existing building did not have a regular stairway, a new access in massive timber construction has been created.

The total construction time for all 11 blocks of flats took 18 months, excluding the outdoor facilities. □

項目信息/Credits and Data

業主/Client: LEG Wohnen NRW GmbH

建筑、結構工程、建筑工程物理、質量監管/Architects,Structural Engineering, Building Physics, Quality Assurance Management: Archplan有限公司/Archplan GmbH

建筑面積/Gross Floor Area: 25,600m2

造價/Cost: € 26,995,000

施工時間/Construction: 2008-2010

攝影/Photos: Archplan GmbH

9 施工圖平面/The plan for detailed engineering