• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    A research on film thickness of a typical dynamic seal for hydraulic actuators

    2015-11-03 07:02:00ZhigangLIANJuanjuanSUNYanliangDONG
    機床與液壓 2015年3期
    關鍵詞:邁瑞密封件油膜

    Zhi-gang LIAN, Juan-juan SUN, Yan-liang DONG

    (1School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China) (2Shenzhen Mindray Bio-medical Electronics Co.,LTD, Shenzhen 518057, China)

    ?

    A research on film thickness of a typical dynamic seal for hydraulic actuators

    Zhi-gang LIAN1*, Juan-juan SUN2, Yan-liang DONG1

    (1School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China) (2Shenzhen Mindray Bio-medical Electronics Co.,LTD, Shenzhen 518057, China)

    This paper studies the film thickness of dynamic seals at the contact of vanes and cylinder which are used in swing motor. A mathematical model is established for the combined seal structure, and the film thickness in sealing gap is gotten by calculating the amount of each part’s deformation. The established mathematical model takes these factors, such as sealing pressure, relative sliding velocity as well as the physical characteristics of the seal on the film thickness, into account, which provides evidences for improving the dynamic sealing performance.

    Polytetrafluoroethylene, Contact surface displacement, Thermoelasticity, Film thickness

    1 Introduction

    Hydraulic system has been widely used in modern engineering, and the reliability of the seals of hydraulic system is of great significance to the hydraulic system. The combined seals, composed of a sealing ring and an O-ring, is a typical sealing form used in modern hydraulic system. However, the way to evaluate the performance of this kind of seals still depends on experience, and which has not yet been studied and verified theoretically.

    The study on hydraulic seals began in the 20th century and had a rapid development in the 1960s. White and Denny researched on reciprocating seals and carried out experiments, which made the sealing research a breakthrough, between 1944 and 1947 [1-2]. In the 1960s, Swales and Dowson combined the theoretical predictions with experiment through the elastic hydrodynamic lubrication theory, which made research on hydraulic seals further leaps [3].

    In the present study, a mathematical model is established through the elastic hydrodynamic lubrication and the mechanics of the seals, which considers the impact of the sealing environment and the physical characteristics on dynamic sealing performance, and then explores the influence of physical quantities on the film thickness in sealing gap.

    2 Mathematical models of dynamic seal

    2.1 Seal structure

    The present study based on dynamic sealing structure of a swing motor at the contact of vanes and cylinder is shown in Fig.1. The seal is composed of a sealing ring and an O-ring, in which the material of sealing ring is polytetrafluoroethylene, and O-ring is made of nitrile rubber.

    2.2 Elastic hydrodynamic lubrication

    The film thickness in sealing gap is mainly concerned with sealing pressure, relative sliding velocity and some other factors. Therefore, the calculation of film thickness can take use of Reynolds equation. Assuming that the state of the film is steady and the dynamic sealing structure of this study is a one-dimensional model, thus one-dimensional Reynolds equation is applicable. The basic form of one-dimensional Reynolds equation is taken as the equation (1).

    (1)

    where, h is the film thickness in sealing gap, V is the relative sliding velocity, ρ is the fluid destiny, and η is the fluid dynamic viscosity.

    Fig. 1 Seal structure of swing motor

    2.3 Kinematical boundary conditions

    (2)

    where, μ is the boundary friction coefficient of the contact surface of the seal.

    2.4 Elastic displacement due to seal pressure and temperature gradient

    After adding sealing pressure into the seal tank of swing motor, the seal will be deformed due to the sealing pressure pcy1, and the swing motor will generate heat during the process of operation according to friction and other factors, which will cause the displacement of cylinder and vanes. If ubodyand uvaneare the radial displacement of inner surface of the body and the radial displacement of outer surface of the vane, then

    where, Dbodyis the inner diameter of the cylinder; dvaneis the outer diameter of the vane; E, υ, α are the elastic modulus, Poisson’s ratio and the expansion coefficient, respectively; θ is the operating temperature; θ0is the temperature during the installation.

    2.5 Surface displacement of the cylinder

    At the body-seal contact, the film thickness is governed by pressure and traction from the fluid-solid and solid-solid interaction. A similar method can be used to obtain the displacement of the contact surface of the cylinder, as in Chapter 3 of Johnson [4],

    (5)

    (6)

    then, at the solid-seal contact, the displacement of inner surface of the cylinder is

    (7)

    2.6 Surface displacement of the seal

    Fig. 2 Stress Analysis of the Seal

    The forces from the compression in the sealing house are Pc(at the cylinder-seal contact) and Q (at the housing-seal contact). Forces Fbin Fig. 2 are shear forces. Then

    (8)

    where, Gsealis the shear modulus of the seal, and uzis the surface displacement of the rectangular strip. Finally, according to the force balance of Oz axis, the equation is worked out to be

    (9)

    2.7 Thermo-elastic stress of the seal

    Due to linear elastic theory, the relationship between stress and strain turns out:

    (10)

    where, Esealis the elastic modulus of the seal, υsealis the Poisson ratio of the seal, and αsealis the expansion coefficient of the seal.

    1) Zero sealing pressure (pcy1=0)

    Ifpcy1=0, andσy=-pcy1, thenσy=0. Assuming that ΔR is the initial radial interference of the seal at the temperature of installation, and Dsealis the outer diameter at the temperature of installation, the normal strainεzofthesealiscalculatedastheformula

    (11)

    Ifp0isthepressureatthecylinder-sealcontact,thenσz=-p0.Takeitintoformula(10),then

    (12)

    2)Nonzerosealingpressure(pcy1≠0)

    Assumingthatpcy1≠0,andσy=-pcy1,thenσy≠0.Ifpconisthepressureatthehousing-sealcontact,pconcanbecalculatedfromthefollowingformulaasinCase(1),

    (13)

    where,pconisanaveragevalue.

    2.8 Film thickness

    Thesections2.1to2.7haveanalyzedthekinematicboundaryconditionsandthemechanicaldeformationoftheseal,thecylinderandthevane.Thus,thefilmthicknessinsealinggapcanbecalculatedasfollow,

    (14)

    3 Applications and results

    Themathematicalmodelestablishedtakesmanyfactorsintoaccount,andconsistsofpartialdifferentialequations,thereforethemodelappearstobemorecomplicatedtosolve.Inthispaper,anumericalequationusedthecenterdifferentialisintroducedtogetthediscretevalues.TheflowchatofthemodelisshowninFig. 3.

    Fig. 3Theflowchartofthemodel

    Thispaperdealswiththefundamentalresultsofthemodelsuchasthecontactpressureandfilmthicknessmaps.TheparametersareshowninTable1.

    Table1Solutionparameters

    SymbolNumericalUnitSymbolNumericalUnitθ23℃-1θ030℃pcy15~35MPaV0.05~1m/sμ0.061dvane379.8mmEvane207GPaνvane0.31αvane1.2×10-5℃-1dbody380mmDbody450MmEbody207GPaνbody0.31αbody1.2×10-5℃-1η0.4795Pa·sW4mmEseal240~360MPaνesal0.38~0.461αseal1.2×10-4℃-1ΔR300μm

    In the hydraulic dynamic sealing, the sealing environment and physical properties of the seal have great impacts on the film thickness. Therefore, the effect of these factors on the film thickness will be discussed in the following chapter.

    3.1 The influence of sealing pressure on film thickness

    Setting and remaining the initial compression of the seal, assuming that the relative sliding velocity is 100 mm/s, the elastic modulus of the seal is 280 MPa and the Poisson ratio of the seal is 0.4, calculating the film thickness at the sealing pressure 5 MPa, 15 MPa, 25 MPa and 35 MPa, the distribution of the pressure and film thickness in sealing gap is shown in Fig. 4 and Fig. 5.

    Fig. 4 The distribution of pressure under different sealing pressure

    Fig. 5 The film thickness under different sealing pressure

    In Fig. 4, it can be seen that the distribution of pressure at the contact is relatively stable and changes not too much. The pressure at the contact is mainly related to the initial compression and the sealing pressure. Fig. 5 shows that the distribution of film thickness is almost wedge-shaped and the film thickness at the exit of the gap increases as the sealing pressure get increased, but the range is 0-2 μm, which fits to the theoretical value. In summary, the film thickness will increase when the seal pressure is greater, which makes the leakage larger and has a bad impact on the sealing performance.

    3.2 The influence of relative sliding velocity on film

    thickness

    Setting and remaining the initial compression of the seal, assuming that the sealing pressure is 25 MPa, the elastic modulus of the seal is 280 MPa and the Poisson ratio of the seal is 0.4, calculating the film thickness at the relative sliding velocity 0.05 m/s, 0.1 m/s, 0.5 m/s and 1 m/s, the distribution of the pressure and film thickness in sealing gap are shown in Fig. 6 and Fig. 7.

    Fig. 6 The distribution of pressure under different relative sliding velocity

    Fig. 7 The film thickness under different relative sliding velocity

    In Fig. 6, it can be seen that the pressure peak along the cylinder-seal contact has a trend to move to the entry of film and its value will decrease when the relative sliding velocity grows. While the pressure at the entry and exist is nearly equal. In Fig. 7, the film at the exist changes little, but the average film thickness increases with the rise of relative sliding velocity. In summary, the increasing relative sliding velocity results in the rise of average film thickness. At the same time, the volume of fluid through the cross-section of the sealing gap will expand, which leads to more leakage and has bad impact on the dynamic sealing performance. Therefore, the relative sliding velocity is one of the most important factors that affect the film thickness and the dynamic sealing performance.

    3.3 The influence of elastic modulus on film thickness

    Setting and remaining the initial compression of the seal, assuming that the sealing pressure is 25 MPa, the relative sliding velocity is 0.1 m/s, and the Poisson ration of the seal is 0.4, calculating the film thickness at the elastic modulus of the seal 240 MPa, 280 MPa, 320 MPa and 360 MPa, the distribution of the pressure and film thickness in sealing gap are shown in Fig. 8 and Fig. 9.

    Fig. 8 The distribution of pressure under different elastic modulus

    Fig. 9 The film thickness under different elastic modulus

    In Fig. 8, the pressure in sealing gap is stable, but it gets higher with the addition of the elastic modulus of the seal. This is because that the contact pressure will grow under the same compression of the seal when the elastic modulus of the seal increases, which leads to the increase of the pressure in sealing gap. Fig. 9 shows that the film thickness at the exist decreased when the elastic modulus of the seal increases, which can reduce the leakage and make the dynamic sealing performance better. In terms of the seal, the elastic modulus is a significant indicator of its physical properties, in the present study, the material of the seal is polytetrafluoroethylene. Thus, the composition and ratio can be adjusted according to the result to get better elastic modulus, which can help obtain better sealing performance.

    3.4 The influence of Poisson ratio on film thickness

    Setting and remaining the initial compression of the seal, assuming that the sealing pressure is 25 MPa, the relative sliding velocity is 0.1 m/s and the elastic modulus of the seal is 280 MPa, calculating the film thickness at the Poisson ratio 0.38, 0.4, 0.42 and 0.46, the distribution of the pressure and film thickness in sealing gap are shown in Fig.10 and Fig.11.

    Fig. 10 The distribution of pressure under different Poisson ratio

    Fig. 11 The film thickness under different Poisson ratio

    In Fig. 10, the distribution of pressure in sealing gap is similar to the one in Fig. 8. Fig. 11 shows that the film thickness at the exist increases with the greater Poisson ratio, which leads to more leakage and is not conducive to dynamic seal. However, the seal’s Poisson ratio changes little, and the physical properties of the seal generally change in a relatively small range. Thus, the physical properties of the seal do not have a significant effect on sealing performance. They can also help to improve sealing performance to some extent.

    4 Conclusions

    In this paper, the film thickness in sealing gap is calculated through elastic hydrodynamic lubrication and the mechanical deformation in each part of the seal. The mathematical model established takes many parameters into account, which makes the model complex and hard to solve with an analytical method. Therefore, the film thickness is obtained by a numerical method.

    This paper mainly discusses the effect of sealing pressure, relative sliding velocity, the elastic modulus and Poisson ratio on the film thickness in sealing gap. According to the analysis results, the film thickness increases with the greater sealing pressure, relative sliding velocity and Poisson ratio, but it will decrease with the increasing elastic modulus of the seal. Meanwhile, sealing pressure and relative sliding velocity has a greater effect on the film thickness, while the elastic modulus and Poisson ratio of the seal affect less. In practical project, the sealing pressure and relative sliding velocity are clearly required. In this case the sealing performance can be improved through making the elastic modulus and Poisson ratio of the seal better.

    [1]White C M, Denny D F. The sealing mechanismof flexible packings[J]. MAP Scientific and Technical Memorandum No. 4/45 (interim report), London, UK, 1945.

    [2]White C M, Denny D F. The sealing mechanismof flexible packings[J]. Scientific and TechnicalMemorandum No. 3/47, UK Ministry of Supply, 1947.

    [3]Dowson D, Swales P D. The development of elastohydrodynamicconditions in a reciprocating seal[C]//In Proceedings of the 4th International Conference on Fluid sealing, 1969: 2-10 (BHRA).

    [4]Johnson K L. Contact Mechanics[M]. London and New York: Cambridge University Press, 1985: 53-55.

    一種典型液壓動密封油膜厚度的研究

    廉志剛1*,孫娟娟2,董彥良1

    1.哈爾濱工業大學, 哈爾濱150080 2.深圳邁瑞生物醫療電子股份有限公司, 深圳518057

    以擺動馬達為例,研究了擺動馬達葉片與缸套接觸處動密封的油膜厚度。針對該處組合式密封結構建立了一個數學模型,通過計算各部分的變形量從而計算出密封間隙的油膜厚度。該數學模型中考慮了密封壓力、相對滑行速度以及密封件的物理特性等對油膜厚度的影響,從而為動密封性能的改進提供依據。

    聚四氟乙烯; 接觸表面位移; 熱彈性; 油膜厚度

    15 December 2014; revised 15 March 2015;

    Zhi-gang LIAN, Postgraduate,

    E-mail: lianli8783@163.com

    10.3969/j.issn.1001-3881.2015.18.003 Document code: A

    TP271.4

    accepted 19 May 2015

    Hydromechatronics Engineering

    http://jdy.qks.cqut.edu.cn

    E-mail: jdygcyw@126.com

    猜你喜歡
    邁瑞密封件油膜
    上海德寶密封件有限公司
    流體機械(2024年2期)2024-04-07 01:59:40
    一種帶有橡膠密封件的閥芯密封件
    上海德寶密封件有限公司
    流體機械(2022年5期)2022-06-28 02:30:30
    深圳邁瑞生物醫療電子股份有限公司
    安徽亞蘭密封件股份有限公司
    水泵技術(2021年5期)2021-12-31 05:26:58
    mindray邁瑞
    “邁瑞杯”《臨床檢驗雜志》征文大賽
    長城油膜軸承油在高速棒材生產線的應用
    石油商技(2021年1期)2021-03-29 02:36:04
    大型數控立式磨床靜壓轉臺油膜熱特性仿真及其實驗分析
    邁瑞iPM-9800中央監護系統聯網故障排除方法探討
    2018国产大陆天天弄谢| 3wmmmm亚洲av在线观看| 最近最新中文字幕免费大全7| 国产亚洲91精品色在线| 在线观看美女被高潮喷水网站| 最后的刺客免费高清国语| 水蜜桃什么品种好| 精品亚洲成国产av| 亚洲色图av天堂| 精品国产一区二区三区久久久樱花 | 欧美精品一区二区大全| 久久精品国产亚洲av涩爱| 男人狂女人下面高潮的视频| 1000部很黄的大片| 男女无遮挡免费网站观看| 免费看日本二区| 啦啦啦啦在线视频资源| 一级黄片播放器| 国产 精品1| av不卡在线播放| 一级毛片我不卡| 亚洲欧美清纯卡通| 久久久久久久精品精品| 97在线视频观看| 色吧在线观看| 日韩一本色道免费dvd| 国产成人精品福利久久| 久久久亚洲精品成人影院| 亚洲怡红院男人天堂| 国产综合精华液| 亚洲国产精品成人久久小说| 精品人妻一区二区三区麻豆| 精品酒店卫生间| 欧美精品人与动牲交sv欧美| av又黄又爽大尺度在线免费看| 国产免费视频播放在线视频| 超碰97精品在线观看| av专区在线播放| 亚洲av二区三区四区| 蜜臀久久99精品久久宅男| 国产欧美另类精品又又久久亚洲欧美| 最后的刺客免费高清国语| 中文字幕亚洲精品专区| 日日摸夜夜添夜夜添av毛片| 国产极品天堂在线| 一级二级三级毛片免费看| 精品一区二区三区视频在线| 国产一区有黄有色的免费视频| 久久鲁丝午夜福利片| 夜夜看夜夜爽夜夜摸| 最新中文字幕久久久久| 国产免费视频播放在线视频| 国产大屁股一区二区在线视频| 亚洲中文av在线| 日韩av在线免费看完整版不卡| 久久久久久伊人网av| 深爱激情五月婷婷| 啦啦啦啦在线视频资源| 国产伦在线观看视频一区| 久久精品人妻少妇| 亚洲精品国产成人久久av| 一本久久精品| 国产大屁股一区二区在线视频| 女人久久www免费人成看片| 久久久午夜欧美精品| 亚洲精品乱久久久久久| 天天躁日日操中文字幕| 亚洲av不卡在线观看| kizo精华| 久久热精品热| 国产亚洲午夜精品一区二区久久| 国产淫片久久久久久久久| 18禁动态无遮挡网站| 欧美+日韩+精品| 精品人妻偷拍中文字幕| 多毛熟女@视频| 熟女人妻精品中文字幕| 国产在线男女| 午夜日本视频在线| 一级二级三级毛片免费看| 欧美精品亚洲一区二区| 熟女av电影| 亚洲真实伦在线观看| 亚洲欧洲日产国产| 久久精品夜色国产| 80岁老熟妇乱子伦牲交| 日韩av在线免费看完整版不卡| 有码 亚洲区| 日本一二三区视频观看| 精品久久久噜噜| 人体艺术视频欧美日本| 一本色道久久久久久精品综合| 亚洲成人手机| 乱码一卡2卡4卡精品| 成人免费观看视频高清| 久久久久精品久久久久真实原创| 美女内射精品一级片tv| 最近最新中文字幕大全电影3| 性高湖久久久久久久久免费观看| 欧美日韩精品成人综合77777| 欧美一区二区亚洲| 18禁动态无遮挡网站| 婷婷色综合大香蕉| 久久人人爽av亚洲精品天堂 | 国产熟女欧美一区二区| 成人国产av品久久久| 国产极品天堂在线| 久久 成人 亚洲| av国产久精品久网站免费入址| 18禁裸乳无遮挡免费网站照片| 男人和女人高潮做爰伦理| 啦啦啦中文免费视频观看日本| 最近的中文字幕免费完整| 久久久久国产精品人妻一区二区| 色视频www国产| 最后的刺客免费高清国语| 熟女人妻精品中文字幕| 国产精品国产三级国产专区5o| 99热这里只有是精品在线观看| 欧美3d第一页| 精品亚洲成a人片在线观看 | 街头女战士在线观看网站| 国内揄拍国产精品人妻在线| 最新中文字幕久久久久| 国产欧美亚洲国产| 国产精品.久久久| 免费av不卡在线播放| 你懂的网址亚洲精品在线观看| 国产精品一区二区三区四区免费观看| 熟女电影av网| 亚洲av中文av极速乱| 亚洲欧美日韩无卡精品| 国产精品成人在线| 中文欧美无线码| 国产伦精品一区二区三区视频9| av国产免费在线观看| 日韩中文字幕视频在线看片 | 熟女人妻精品中文字幕| 免费看av在线观看网站| 国产一区二区三区综合在线观看 | 国语对白做爰xxxⅹ性视频网站| 亚洲精品一区蜜桃| 欧美三级亚洲精品| 91久久精品国产一区二区三区| 狂野欧美白嫩少妇大欣赏| 日日摸夜夜添夜夜添av毛片| 少妇丰满av| 精品久久久久久久末码| 国产伦精品一区二区三区四那| 欧美亚洲 丝袜 人妻 在线| 久久ye,这里只有精品| 少妇 在线观看| 91精品一卡2卡3卡4卡| 蜜臀久久99精品久久宅男| 人人妻人人添人人爽欧美一区卜 | 大话2 男鬼变身卡| 精品午夜福利在线看| 国产片特级美女逼逼视频| 欧美97在线视频| 国产av码专区亚洲av| 99久久精品热视频| 国产淫片久久久久久久久| 亚洲av中文字字幕乱码综合| 男人舔奶头视频| 激情五月婷婷亚洲| 乱系列少妇在线播放| 赤兔流量卡办理| 男女免费视频国产| av免费在线看不卡| 最近手机中文字幕大全| 国产在线男女| 黄片wwwwww| 国产黄片视频在线免费观看| 久久精品国产亚洲av天美| 亚洲av二区三区四区| 99久久中文字幕三级久久日本| 我要看黄色一级片免费的| 国产免费又黄又爽又色| 国产av码专区亚洲av| 777米奇影视久久| 五月天丁香电影| 国产 一区 欧美 日韩| 欧美三级亚洲精品| a级毛片免费高清观看在线播放| 国产精品熟女久久久久浪| 人妻 亚洲 视频| 天堂中文最新版在线下载| 欧美国产精品一级二级三级 | 免费看光身美女| 日本wwww免费看| 春色校园在线视频观看| 国产伦理片在线播放av一区| 成人国产av品久久久| 久久人人爽人人爽人人片va| 久热久热在线精品观看| 人体艺术视频欧美日本| 久久影院123| 亚洲国产成人一精品久久久| 欧美三级亚洲精品| 人人妻人人添人人爽欧美一区卜 | 国产午夜精品久久久久久一区二区三区| 欧美zozozo另类| 在线观看人妻少妇| 成人黄色视频免费在线看| 好男人视频免费观看在线| 99热这里只有是精品50| 在线观看av片永久免费下载| 18禁在线无遮挡免费观看视频| 少妇精品久久久久久久| 欧美日韩在线观看h| 好男人视频免费观看在线| 国产欧美日韩精品一区二区| 国内揄拍国产精品人妻在线| 国产老妇伦熟女老妇高清| 一个人看视频在线观看www免费| 亚洲精品久久久久久婷婷小说| 综合色丁香网| 国产日韩欧美在线精品| 国内揄拍国产精品人妻在线| 国产 精品1| 一个人看视频在线观看www免费| 日韩大片免费观看网站| 麻豆精品久久久久久蜜桃| 免费看光身美女| 欧美精品国产亚洲| 免费看日本二区| 熟女电影av网| 久久久久久久精品精品| 精品亚洲成a人片在线观看 | 新久久久久国产一级毛片| 亚洲精品视频女| 视频中文字幕在线观看| 99热这里只有是精品50| 国产真实伦视频高清在线观看| 亚洲成人手机| 国产伦理片在线播放av一区| 大片电影免费在线观看免费| 午夜精品国产一区二区电影| 国产精品一区二区性色av| 欧美一区二区亚洲| 免费人成在线观看视频色| 日日啪夜夜撸| 欧美国产精品一级二级三级 | 观看美女的网站| 最后的刺客免费高清国语| 中文字幕免费在线视频6| 91狼人影院| 22中文网久久字幕| 男女下面进入的视频免费午夜| 欧美一区二区亚洲| 国产一级毛片在线| 小蜜桃在线观看免费完整版高清| 国产精品久久久久久久电影| freevideosex欧美| 麻豆国产97在线/欧美| 一区二区三区乱码不卡18| 免费在线观看成人毛片| 久久精品国产a三级三级三级| 欧美激情极品国产一区二区三区 | 亚洲欧美日韩卡通动漫| 亚洲国产毛片av蜜桃av| 欧美bdsm另类| 久久国内精品自在自线图片| 在线播放无遮挡| 九九久久精品国产亚洲av麻豆| 欧美精品亚洲一区二区| 夜夜看夜夜爽夜夜摸| 久久97久久精品| 青春草视频在线免费观看| 少妇被粗大猛烈的视频| 久久精品夜色国产| 日本黄大片高清| av国产精品久久久久影院| 青春草视频在线免费观看| 日韩精品有码人妻一区| a级毛色黄片| 一级毛片黄色毛片免费观看视频| av在线播放精品| 国产日韩欧美在线精品| 国产精品秋霞免费鲁丝片| 麻豆精品久久久久久蜜桃| 插逼视频在线观看| 视频中文字幕在线观看| 蜜桃在线观看..| 日日撸夜夜添| 99热这里只有精品一区| 亚洲真实伦在线观看| 久久韩国三级中文字幕| 18+在线观看网站| 一级毛片 在线播放| 国产美女午夜福利| 赤兔流量卡办理| 色婷婷av一区二区三区视频| 国产乱来视频区| 日本黄大片高清| 毛片一级片免费看久久久久| 精品亚洲乱码少妇综合久久| 26uuu在线亚洲综合色| 五月天丁香电影| 亚洲中文av在线| 欧美性感艳星| 成人一区二区视频在线观看| 日本午夜av视频| 在线免费观看不下载黄p国产| 欧美日韩综合久久久久久| 黄色怎么调成土黄色| 97在线人人人人妻| av免费观看日本| 97精品久久久久久久久久精品| 久久久久久久久久人人人人人人| 亚洲国产精品一区三区| a级一级毛片免费在线观看| 99热国产这里只有精品6| 国产中年淑女户外野战色| 国产有黄有色有爽视频| videossex国产| 国产精品人妻久久久久久| 啦啦啦在线观看免费高清www| 蜜桃亚洲精品一区二区三区| 两个人的视频大全免费| 一二三四中文在线观看免费高清| 国产精品国产av在线观看| av又黄又爽大尺度在线免费看| 欧美成人午夜免费资源| 又大又黄又爽视频免费| 热re99久久精品国产66热6| 22中文网久久字幕| 亚洲av免费高清在线观看| 波野结衣二区三区在线| 免费观看性生交大片5| 秋霞伦理黄片| 麻豆国产97在线/欧美| 免费黄频网站在线观看国产| 国产精品秋霞免费鲁丝片| 韩国高清视频一区二区三区| 精品熟女少妇av免费看| 亚洲,一卡二卡三卡| 赤兔流量卡办理| 日韩中文字幕视频在线看片 | 欧美少妇被猛烈插入视频| 观看免费一级毛片| 高清日韩中文字幕在线| 国产无遮挡羞羞视频在线观看| 91久久精品电影网| 亚洲综合精品二区| a级一级毛片免费在线观看| 国产精品国产三级国产av玫瑰| 纯流量卡能插随身wifi吗| 汤姆久久久久久久影院中文字幕| 亚洲精品成人av观看孕妇| 中文天堂在线官网| 99久国产av精品国产电影| 成人亚洲精品一区在线观看 | 人妻 亚洲 视频| 亚洲综合色惰| 日日啪夜夜爽| 日本色播在线视频| 亚洲成人一二三区av| 亚洲精品久久久久久婷婷小说| 丝袜脚勾引网站| 高清黄色对白视频在线免费看 | 纯流量卡能插随身wifi吗| 中文字幕av成人在线电影| 国产成人a∨麻豆精品| 香蕉精品网在线| 国产精品国产三级专区第一集| 国产美女午夜福利| 日产精品乱码卡一卡2卡三| 亚洲欧美中文字幕日韩二区| 在线天堂最新版资源| 国产免费视频播放在线视频| 国产一区二区三区综合在线观看 | 亚洲人成网站在线观看播放| 我的女老师完整版在线观看| 97在线人人人人妻| 精品一区二区免费观看| 丝瓜视频免费看黄片| 欧美亚洲 丝袜 人妻 在线| 免费黄色在线免费观看| 国产高潮美女av| 欧美xxxx黑人xx丫x性爽| 色综合色国产| 久久人人爽av亚洲精品天堂 | 国产成人a∨麻豆精品| 黄色配什么色好看| 卡戴珊不雅视频在线播放| 国产黄片美女视频| 欧美成人一区二区免费高清观看| 黑丝袜美女国产一区| 久久久久人妻精品一区果冻| 赤兔流量卡办理| 搡老乐熟女国产| a级一级毛片免费在线观看| 精品久久久久久久久av| 日韩一区二区视频免费看| 亚洲国产av新网站| 老女人水多毛片| 亚洲伊人久久精品综合| 欧美3d第一页| 91午夜精品亚洲一区二区三区| 亚洲成人手机| 午夜视频国产福利| 五月伊人婷婷丁香| 欧美xxxx黑人xx丫x性爽| 精品99又大又爽又粗少妇毛片| 黑丝袜美女国产一区| 高清日韩中文字幕在线| 性色av一级| 精品熟女少妇av免费看| 日日撸夜夜添| 国产精品国产三级专区第一集| 国产亚洲最大av| 亚洲av综合色区一区| 欧美日韩综合久久久久久| 欧美性感艳星| 亚洲第一av免费看| 欧美日韩在线观看h| 一级毛片我不卡| 日韩成人伦理影院| 亚洲av.av天堂| 国产69精品久久久久777片| 欧美日韩综合久久久久久| 欧美性感艳星| 大又大粗又爽又黄少妇毛片口| 亚洲熟女精品中文字幕| 一本一本综合久久| 性高湖久久久久久久久免费观看| 欧美另类一区| 丝袜喷水一区| 观看av在线不卡| 久久久久精品性色| 色综合色国产| 久久久精品94久久精品| 伊人久久国产一区二区| 国产免费福利视频在线观看| 亚洲国产精品一区三区| 久久久欧美国产精品| 国产亚洲欧美精品永久| 老女人水多毛片| 欧美bdsm另类| 精品亚洲乱码少妇综合久久| 久久久久久久久大av| 老熟女久久久| 日韩三级伦理在线观看| 国产成人精品福利久久| 欧美性感艳星| 一个人看视频在线观看www免费| 久久97久久精品| 大陆偷拍与自拍| 最近手机中文字幕大全| 永久网站在线| 2021少妇久久久久久久久久久| 日本-黄色视频高清免费观看| 热99国产精品久久久久久7| 亚洲第一区二区三区不卡| 亚洲aⅴ乱码一区二区在线播放| 精品一区二区三卡| 国产精品一区二区在线不卡| 中文资源天堂在线| 日韩成人av中文字幕在线观看| 久久鲁丝午夜福利片| 免费观看性生交大片5| 亚洲经典国产精华液单| 毛片女人毛片| 成人毛片a级毛片在线播放| 少妇熟女欧美另类| 少妇人妻一区二区三区视频| 亚洲精品一区蜜桃| 大片电影免费在线观看免费| av视频免费观看在线观看| 亚洲av福利一区| 中文字幕人妻熟人妻熟丝袜美| 国产真实伦视频高清在线观看| 18禁动态无遮挡网站| 精品久久久久久电影网| 老女人水多毛片| 免费久久久久久久精品成人欧美视频 | av女优亚洲男人天堂| 在线天堂最新版资源| 久久6这里有精品| 国产精品一二三区在线看| 国产一区有黄有色的免费视频| 久久精品久久久久久噜噜老黄| a级毛色黄片| 91精品一卡2卡3卡4卡| 日韩国内少妇激情av| 国产精品福利在线免费观看| 女性被躁到高潮视频| 国产精品久久久久久久电影| 精品久久久久久久末码| 高清视频免费观看一区二区| 免费av中文字幕在线| 国产在线男女| 狂野欧美激情性xxxx在线观看| 观看免费一级毛片| 五月玫瑰六月丁香| 成人综合一区亚洲| 夫妻午夜视频| 亚洲欧美成人精品一区二区| 偷拍熟女少妇极品色| 欧美老熟妇乱子伦牲交| 激情五月婷婷亚洲| 联通29元200g的流量卡| 99热网站在线观看| 丝瓜视频免费看黄片| 最新中文字幕久久久久| 高清毛片免费看| 日日撸夜夜添| 99热这里只有是精品50| 少妇的逼好多水| 成年女人在线观看亚洲视频| 久久久久视频综合| 久久精品国产a三级三级三级| 少妇人妻久久综合中文| 亚洲av不卡在线观看| 国产一区二区在线观看日韩| 亚洲精品成人av观看孕妇| 亚洲精品视频女| 在线免费观看不下载黄p国产| 国内少妇人妻偷人精品xxx网站| 日韩免费高清中文字幕av| 熟女电影av网| 国产亚洲精品久久久com| 中文字幕久久专区| 亚洲av男天堂| 老师上课跳d突然被开到最大视频| 26uuu在线亚洲综合色| 久久久久久久国产电影| 精华霜和精华液先用哪个| 久久久久久久大尺度免费视频| 看非洲黑人一级黄片| 欧美丝袜亚洲另类| 国产永久视频网站| 人妻少妇偷人精品九色| 日本黄大片高清| 国内精品宾馆在线| 日本免费在线观看一区| 一区二区三区乱码不卡18| 久久女婷五月综合色啪小说| 国产精品女同一区二区软件| 联通29元200g的流量卡| 大片电影免费在线观看免费| av专区在线播放| 欧美另类一区| 久久久欧美国产精品| 免费久久久久久久精品成人欧美视频 | 大片电影免费在线观看免费| a级一级毛片免费在线观看| 日韩强制内射视频| 中国美白少妇内射xxxbb| 偷拍熟女少妇极品色| 国产成人freesex在线| 亚洲,一卡二卡三卡| 国产精品一区二区在线观看99| 欧美成人一区二区免费高清观看| 免费观看在线日韩| a 毛片基地| 亚洲精品久久久久久婷婷小说| 国产无遮挡羞羞视频在线观看| 婷婷色综合大香蕉| 99久久人妻综合| 日韩三级伦理在线观看| av专区在线播放| 亚洲精品国产色婷婷电影| 色5月婷婷丁香| 亚洲欧美精品自产自拍| 一区二区三区四区激情视频| 国产在线视频一区二区| 黄色怎么调成土黄色| 日本黄色日本黄色录像| 国产成人免费无遮挡视频| 黑丝袜美女国产一区| 男人和女人高潮做爰伦理| 免费av不卡在线播放| 午夜福利影视在线免费观看| av.在线天堂| 日韩,欧美,国产一区二区三区| 久久久a久久爽久久v久久| 亚洲欧美成人综合另类久久久| 日本猛色少妇xxxxx猛交久久| 赤兔流量卡办理| 日本av手机在线免费观看| 精品少妇黑人巨大在线播放| 多毛熟女@视频| 国产伦理片在线播放av一区| 久久久久久久久大av| 一级爰片在线观看| 久久人人爽人人爽人人片va| 最近最新中文字幕大全电影3| 91久久精品国产一区二区三区| 一个人看视频在线观看www免费| 欧美另类一区| 一个人看视频在线观看www免费| 国产精品嫩草影院av在线观看| 国产免费一级a男人的天堂| 亚洲美女搞黄在线观看| 亚洲国产精品一区三区| 三级国产精品欧美在线观看| 熟女人妻精品中文字幕| 国产成人免费观看mmmm| 欧美人与善性xxx| 狂野欧美激情性xxxx在线观看| 久久久久国产网址| 国产精品99久久99久久久不卡 | 最近2019中文字幕mv第一页| 亚洲真实伦在线观看| 日韩免费高清中文字幕av| 亚洲精品国产av蜜桃| 日韩中文字幕视频在线看片 | 国内少妇人妻偷人精品xxx网站| 97在线人人人人妻| 久久久久久久精品精品| 日韩av不卡免费在线播放| 一级毛片久久久久久久久女| 中文天堂在线官网|