• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Research on the correction of eccentric error based on noncontact shaft torque measurement system*

    2014-06-09 14:44:40WenjunDENGKunYANGBingqingCHENJingfeiXIAOWeigngZHENG
    機床與液壓 2014年3期
    關鍵詞:仿真磨損

    Wen-jun DENG,Kun YANG,Bing-qing CHEN,Jing-fei XIAO,Wei-gng ZHENG

    aSchool of Energy and Power Engineering;bReliability Engineering Institute,School of Energy and Power Engineering;cEngineering Training Center,Wuhan University of Technology,Wuhan 430063,China

    Research on the correction of eccentric error based on noncontact shaft torque measurement system*

    Wen-jun DENG?a,Kun YANGb,Bing-qing CHENa,Jing-fei XIAOa,Wei-gang ZHENGc

    aSchool of Energy and Power Engineering;bReliability Engineering Institute,School of Energy and Power Engineering;cEngineering Training Center,Wuhan University of Technology,Wuhan 430063,China

    The main content of the online monitoring of operation statues of shaft is the measurement of shaft torque.For the method that the shaft torque is gotten by the non-contact measurement,the accuracy for measurement of torsional angle determines the correction of measurement result for shaft torque.In this paper,the eccentric error of original system is analyzed,and the effect of eccentric installment of the encoder on the time that the photo-electric sweeps sectorial photoelectric light pass hole is also analyzed.Then the specific mathematical expression of the time offset that the light pass the optical aperture is given by geometric analysis and motion decomposition.And the eccentric error of the measurement system is eliminated according to the analysis.The research of this paper will provide theoretical guidance for the design of torque measuring instrument,and it is helpful to improve measurement accuracy of this kind o f devices.

    Sensor technology,Non-contact photo-electrical,Torque monitoring,Eccentricity, Error analysis,Correction

    In the system that takes shaft as transmission parts,the working condition of shaft will determine the normal operation of the whole system.The torque is one of the most useful parameters associated with the shaft working condition,and it is also one of the most important performance parameters of power plant and the host[1-2].By measuring the shaft torque,people can understand and detect the power plant,the host and working condition of other related equipments,then make detection and diagnosis for the related parts.

    Many methods for shaft torque measurement derive against this background,including the shaft torque measuring methods about contact and non-contact[3-4].In this paper,the author mainly discussed the measuring methods based on the photoelectric non-contact rotor torque.Photoelectric non contact rotor torque measurement system determines the rotating shaft torque using two encoders fixed on the rotating shaft with the emergence of the shaft torsion and torsion angle.The measurement system can complete non-contact measurement task effectively.It doesn’t contact with the shaft or affect the rotation of the shaft.Measurement system will not be affected with the rotation of the shaft changing in the environment.At the same time it can also make up for other non-contact measurement system’s influence of temperature drift and time drift.But the measurement has a fatal flaw in the system:The encoder eccentric in the process of assembly affecting the result of the measurement cannot be resolved.This article will analyze the measurement error caused by encoder eccentric in the system and put forward a feasible method[5].

    1.The original system measuring principle

    Based on the photoelectric non-contact rotor torque measuring device is mainly composed of computer,controller,photoelectric encoder and optoelectronic switch[6-8].The structure is shown in Figure 1.When the shaft rotates,due to the presence of load torque,torque,which is the same size but in the reverse direction,will produce on the rotation of the shaft section correspondingly.And with the different distance,the size of the torsion angle is also different.Therefore when the shaft rotates,a certain distance away from the two cross sections on the shaft produces relative rotation.Through the photoelectric switch,the two section’s relative torsion angleθcan be measured.So the rotating shaft torque M can be calculated according to the formula of material mechanics:

    Where G is the shear modulus of elasticity of elastic axis(Pa);θis the two section’s torsion angle(rad);IPis the polar moment of inertia cross-section to the center of the circle(m4);L is the distance between two cross sections(m).

    Figure 1.Photoelectric encoder installation diagram

    After the shaft rotates,two encoders located on the rotating shaft sweep two photoelectric detectors respectively,and then two columns of phase differences of different square wave will be output.After processing,two relative torsion angle encoders can be gotten[9].Specific process is as follows:each quadrant area on the encoder against the corresponding central angle isθ,and photoelectric detector outputting signal pulse width which is high level of square wave signal is L(In the original system L is taken for θafter quantifying).The quantitative value is A.When the shafting is not loading,the initial angular deviation on the two encoders’corresponding shading rack isξ,and the quantitative value is a.When the shaft transmits torque,the relative rotation angle on the two encoders’corresponding shading rack isΔξ. And its quantitative value isΔa.So the encoder is used to calculate the shafting torsional angle such as formula(2)and(3).

    2.The original system of eccentric error analyzes

    According to the principle of the design of original system,there are many errors,such as the counting quantization error caused by clock/counter,the error in the encoder installation process,and system inherent error of torque,speed characteristics and nonlinearity.This article mainly studies the error of encoders’installation.

    The encoder installation error usually displays in two forms.One is that the encoder’s circle is not on the measured shaft’s centerline.It is called eccentric error.The other is that the plane the encoder existing is out of vertical of the measured shaft centerline.It is called no vertical error[10].A wide tooling can be added to reduce the vertical error in the process of encoder installation.Here the encoder’s vertical error is no longer discussed.Then a further analysis will be carried out on the encoder eccentric error in the process of installation.Also a solution to its eccentric error will be discussed.

    As shown in Figure 2,the encoders,which are installed according to the above methods,are considered to be installed vertically.Thus,the vertical error can be ignored,but the eccentric error is still exists.Moreover,based on the simplified model,the eccentric’s condition of one encoder installation is only considered.With the rotation of the encoder which exists eccentric error,the location that its sectorial light pass hole sweeps the specification of the photoelectric detector will vary with the encoder’s center relative to the changes of the shaft centerline’s position.The conditions for both two encoders existing eccentric error can be analyzed based on this case.

    綜上所述,試論如何做好110kV變電電氣工程管理工作具有重要意義,可以有效提升水平。要采用多元化管理手段,解決過程中遇到的問題,推動我國電力事業更好發展,滿足各行各業的需求。

    Figure 2.Encoder eccentric error of installation diagram

    With the encoder circle jumping up and down,the trajectory formed when photoelectric detector sweeps through the sector light pass hole of encoder changes constantly.If the distance between the photoelectric detector’s light and the shaft centerline is taken as radius,and the intersection point where this radius and the centerline of the rotating shaft intersecting at is taken as the center of a circle,a circle will be gotten.And the trajectory formed when the circle intersects the encoder’s sectorial light pass hole.Its real trajectory is shown in Figure 3:O1is the center of the shaft;O2is the center of the encoder;θis the angle of the sectorial light pass hole related to the center of the shaft.

    Figure 3.The diagram of the trajectory formed when photoelectric detector sweeps through the sectorial light pass hole of encoder

    3.Quantization of eccentric error of the system

    First,in order to quantify the eccentric error,the authors put forward a set of basic program,namely:first,find out the relationship between the angle that the shaft turned and the distance which is between the shaft centerline and a fixed point on encoder which rotates with the rotating shaft;second,after the above relationship has been obtained,measure the distance between the shaft centerline and the fix point mentioned above in some way when the sectorial light pass hole of the encoder begins sweeping through the photo detector,then measure the distance between the shaft centerline and the fix point mentioned above when sectorial light pass hole of the encoder cannot pass light;third,calculate the amount of error based on the relationship obtained in the first step and the data in second step.

    Due to the existence of the eccentric encoder,the distance between the shaft centerline and a fixed point on the encoder will change cyclically with the rotation of the shaft,now a point on the vertical axis O1O2(Figure 3)of the encoder is selected as the fixed point,then the authors will give the relationship between the angle that the shaft turned and the distance between the shaft centerline and the fixed point mentioned above.The relationship is as follow:

    Where,δis the eccentricity of the encoder(mm);R is the distance between the fixed point on the encoder and the center of the encoder(mm);βis the rotated angle of the shaft(rad).

    Now in order to make the relationship more intuitive,specific value will be put to the parameters. Take the value of R to 93 mm,δto 1 mm,andβ ranges from 0 to 3π,and then use matlab to fit the result as the curve(Figure 4).

    Figure 4.The fitting curve

    According to the relevant analysis,it is understood that this curve fits well with the actual rotation of the eccentric encoder.Next,the authors will explain the formula(4)further.

    1)On the derivation ofδ,by observing Figure 4 it is found thatδis half of the difference between the peaks and troughs,thusδcan be gotten by measuring the correlation curve of the distance between the fixed point on encoder and the centerline of shaft through a certain way.

    3)About analysis of the correlation between the time that the light passes through the sectorial light pass hole of encoder and the formula,first,formula(4)contains a well encoder eccentricity information,and the curve in Figure 4 reflects the beating of the fixed point on encoder when shaft is rotating well.And it is known that when photoelectric detector sweeps through the sectorial light pass hole of encoder,if it is assumed that the encoder does not turn but the light emitted by photoelectric detector cuts stationary photoelectric encoder,the cutting motion of the light can be substituted by synthesis of a rotational movement rotating around the encoder with a constant radius and a motion cutting the light pass hole of encoder from the top down,thus the trajectory formed when the photoelectric detector sweeps through the sectorial light pass hole of encoder is not a section of arc around the shaft centerline,but the situation shown in Figure 3.O2A and O2B in Figure 3 are the two sides of the sectorial light pass hole of encoder,arc AB is the trajectory formed when light sweeps through the sectorial light pass hole of encoder.According to formula(4),it is gotten that the beating of the fixed point on encoder reflects the angle information turned by the shaft,and there is a mathematical relationship of these two values,by decomposing the motion,as long as the time that photo detector cuts down the light pass hole of encoder is able to known(namely,if encoder is not rotating,the time that the light emitted by photodetector cuts the light pass hole of encoder from the top down),it will be able to get the time of another decomposition motion(namely the rotational movement rotating around the encoder with a constant radius).And this time is the real time that light sweeps through the sectorial light pass hole of encoder.Figure 3 indicates that it is needed to obtain the time light from photodetector jumps from point A to point B.Back to formula(4),use the relationship between the angle that the shaft turned and the distance which is between the shaft centerline and the fixed point on encoder,at this point,as long as the distance between the fixed point on encoder and shaft centerline at point A,and also a distance at point B,is gotten,the angle that the shaft turned when encoder turned from A to B according to formula(4)can be gotten.And then it is able to know the time when light gets through the sectorial light pass hole according to the rotational speed of the shaft.

    Based on the principle of non-contact shaft torque measurement system,it is needed to know the time that light sweeps through the sectorial light pass hole of encoder in the case of that the encoder is not eccentric.Thus on the basis of the original system,it is necessary to remove the eccentric error.According to the analysis above,the eccentric error needed to quantify is actual represented by formula(5):

    Where,Δt—the amount of the offset time caused by the eccentricity(s);θ—angle of Photoelectric encoder sectorial light pass hole(rad);α—angle between the vertical axis O1O2and O1A(rad);φ—angle between the vertical axis O1O2and O1B(rad);ω—The angular velocity of the shaft(rad/s).

    4.Conclusion

    In this paper,the correction of eccentric error based on non-contact shaft torque measurement system has been researched,and the main reason of the cause of eccentric error,and the trajectory formed when photoelectric detector sweeps through the sectorial light pass hole of encoder,which is caused by the eccentric installation of encoder,have been presented.An indirect method is proposed on the measurement of the time that the light passes through the sectorial light pass hole of encoder,and the eccentric error is also eliminating based on the indirect method.Based on the results of the paper,the principles and methods elaborated in this paper can be specifically applied to eliminate the eccentric error,and improve the measurement accuracy of the device.Mainly note the following aspect:it must try to be ensured that the distance between the light emitted by the photoelectric detector and the shaft is measured with sufficient accuracy.

    [1] Yang K,Zou X C,Yan X P.Non-contact optical rotation shaft torque and power measurement device. 201110008400.3[P].2011-07-01.

    [2] Yu H L,Zhu C X,Yang Z L.Design and realization of dynamic torque measurement system of raster[J].Journal of Applied Optics,2006,27(5):442-445.

    [3] Wen X Q,Zang Y Z.Status and trends of the torque sensor[J].Instrument Technique and Sensor,2001(12):1-3.

    [4] Zhu CM,Wang Z X,Hu X F.Research and Design of torque measurement system[Z].Machinery Design&Manufacture,1001—3997(2009)05—0030—02.

    [5] Lv Z Y.The Study on Ship’s shaft torque Measurement Based Vibrating-wire Principle[D].Harbin:Harbin Engineering University,2008.

    [6] Yu H L,Wang Y G,Liu X F,et al.Measurement sys-tems design based on grating torque sensor[J].Optics and Precision Engineering,2004,12(3):119-123.

    [7] Tan W Z,Yang K,Zhang Y,et al.Research on the optical shaft torque measurement device based on FPGA[C].IEEI,2009.

    [8] PARKINSON JR.Non-contact system provides measurement and management of shaft horsepower[C].ASME Pap 72-GT-29 for meeting,1972.

    [9] Huang Z,Zhang B,Dong Q L.Research on torque measurement based on laser Doppler technique[J].Acta Metrologica Sinica,2007,28(1):61-63.

    [10]Yu JH,Zhu J J,Yang JG.Research on the tester of ship shafting shaft torque[J].China Shiprepair,2006,19(6):8-10.

    摘要:針對模具的磨損問題,介紹了模具的磨料磨損機理,詳細討論了Archard磨損模型。建立了基于磨損計算的反擠壓三維有限元模型并進行計算,得到不同初始硬度凸模的最大磨損深度規律。結果表明:模具最大磨損深度隨模具材料的初始硬度升高具有下降的趨勢,在變形區和速度穩定的條件下,模具的最大磨損深度和初始硬度函數(1/H2)成正比關系。

    關鍵詞:Archard;仿真;磨損;模具壽命;穩態變形

    中圖分類號:TQ330.4+1

    非接觸式轉軸扭矩測量系統偏心誤差的修正研究*

    鄧文軍?a,楊 琨b,陳冰清a,肖勁飛a,鄭衛剛c

    a.能源與動力工程學院
    b.能源與動力工程學院可靠性工程研究所
    c.工程訓練中心,武漢理工大學,武漢 430063

    軸系運轉狀態在線監測的主要內容為轉軸扭矩的測量。對于基于非接觸式轉軸扭矩的測量方法,能否精確地測量軸系扭轉角度將決定扭矩和功率測量結果的準確性。分析了原系統的偏心誤差,以及碼盤安裝偏心對光電檢測器掃過碼盤扇形通光孔的時間的影響,并通過幾何分析以及運動分解給出了碼盤扇形通光孔的通光時間的偏移的具體數學表達式,以此消除測量系統的偏心誤差。研究結果對轉軸扭矩測量?jī)x的設計提供了理論指導,有利于提高此類設備的測量精度。

    傳感器技術;光電非接觸;扭矩測量;偏心;誤差分析;修正

    U467.4+4

    穩態變形下Archard模型模具磨損數值分析*

    胡建軍?1,2,侯天鳳1

    1.重慶理工大學材料科學與工程學院,重慶 400054
    2.汽車零部件先進制造技術教育部重點實驗室,重慶 400054

    10.3969/j.issn.1001-3881.2014.18.015

    2014-04-15

    *Project supported by the Students Innovation and Entrepreneurship Training Program(No.20131049705004)and the National Natural Sciences Foundation of China(NSFC)(No. 51309185)

    ?Wen-jun DENG,E-mail:2276386760@qq.com

    猜你喜歡
    仿真磨損
    套管磨損機理研究
    基于復合噴霧冷卻的高速車削GH4169刀具磨損的研究
    一種幫助幼兒車內脫險應急裝置的仿真分析
    科技資訊(2016年18期)2016-11-15 20:09:22
    Buck開關變換器的基本參數設計及仿真分析
    試析PLC控制下的自動化立體倉庫仿真情況分析
    基于MADYMO的航空座椅約束系統優化設計
    科技視界(2016年18期)2016-11-03 21:44:44
    中國體態假人模型與FAA Hybrid Ⅲ 型假人模型沖擊差異性分析
    科技視界(2016年18期)2016-11-03 20:31:49
    機械加工仿真技術研究
    鉆頭磨損后怎樣更換
    C/C及C/C-Cu復合材料的摩擦磨損性能
    99香蕉大伊视频| 一二三四中文在线观看免费高清| 黄网站色视频无遮挡免费观看| 亚洲精品中文字幕在线视频| 国产精品一区二区在线不卡| 午夜福利视频在线观看免费| 建设人人有责人人尽责人人享有的| 国产不卡av网站在线观看| 国产一区有黄有色的免费视频| 999精品在线视频| 另类精品久久| 18禁观看日本| 亚洲国产欧美日韩在线播放| 久久久久国产精品人妻一区二区| 亚洲国产精品成人久久小说| 人妻人人澡人人爽人人| xxxhd国产人妻xxx| 亚洲av综合色区一区| 宅男免费午夜| 日本av免费视频播放| 制服人妻中文乱码| 韩国高清视频一区二区三区| 不卡视频在线观看欧美| 如日韩欧美国产精品一区二区三区| 欧美中文综合在线视频| 最近2019中文字幕mv第一页| videos熟女内射| www.av在线官网国产| 两性夫妻黄色片| 激情五月婷婷亚洲| 国产亚洲一区二区精品| 亚洲精华国产精华液的使用体验| 大香蕉久久成人网| 啦啦啦视频在线资源免费观看| 韩国高清视频一区二区三区| 国产在线免费精品| 色婷婷av一区二区三区视频| 2021少妇久久久久久久久久久| 日日啪夜夜爽| 在线天堂最新版资源| 国产成人91sexporn| 亚洲国产欧美网| 嫩草影视91久久| 日韩熟女老妇一区二区性免费视频| 中文字幕人妻熟女乱码| av国产久精品久网站免费入址| 黑人巨大精品欧美一区二区蜜桃| 在线天堂最新版资源| 色吧在线观看| 久久久久精品性色| 亚洲国产精品999| av在线观看视频网站免费| 久久久久精品国产欧美久久久 | 一级,二级,三级黄色视频| 男女边吃奶边做爰视频| 亚洲精品在线美女| 大香蕉久久网| 色吧在线观看| 黄色视频在线播放观看不卡| 亚洲男人天堂网一区| 久久精品亚洲av国产电影网| 亚洲精品av麻豆狂野| 亚洲国产欧美日韩在线播放| 精品国产露脸久久av麻豆| 日本vs欧美在线观看视频| 精品少妇内射三级| 黑人巨大精品欧美一区二区蜜桃| 欧美xxⅹ黑人| 美女扒开内裤让男人捅视频| 热re99久久精品国产66热6| 深夜精品福利| 91aial.com中文字幕在线观看| 丰满迷人的少妇在线观看| 国产日韩欧美视频二区| 十八禁网站网址无遮挡| 极品人妻少妇av视频| svipshipincom国产片| 久久 成人 亚洲| 无限看片的www在线观看| 久久久久久久国产电影| 久久久欧美国产精品| 色网站视频免费| 操美女的视频在线观看| 欧美精品亚洲一区二区| 18禁动态无遮挡网站| 男女边吃奶边做爰视频| 只有这里有精品99| 中文字幕人妻丝袜制服| 制服丝袜香蕉在线| 免费人妻精品一区二区三区视频| 午夜久久久在线观看| 高清不卡的av网站| 久热爱精品视频在线9| 午夜福利影视在线免费观看| 99久国产av精品国产电影| 秋霞在线观看毛片| 久久久久精品性色| 久久久久精品性色| 最近手机中文字幕大全| 天天躁夜夜躁狠狠躁躁| 国产成人精品在线电影| 日韩中文字幕视频在线看片| 丝袜脚勾引网站| 亚洲人成网站在线观看播放| 婷婷色综合大香蕉| 咕卡用的链子| 久久久久久人人人人人| 成年人午夜在线观看视频| 在线观看免费高清a一片| 国精品久久久久久国模美| 久久久精品区二区三区| 亚洲精品美女久久久久99蜜臀 | 国产男人的电影天堂91| 侵犯人妻中文字幕一二三四区| 1024香蕉在线观看| 亚洲国产av新网站| 国产黄色视频一区二区在线观看| 久久鲁丝午夜福利片| 别揉我奶头~嗯~啊~动态视频 | 成人漫画全彩无遮挡| 国产精品久久久久久精品古装| 19禁男女啪啪无遮挡网站| 精品一区二区三区四区五区乱码 | 亚洲精品第二区| 亚洲精品一二三| 国产女主播在线喷水免费视频网站| 国产精品一国产av| 黄频高清免费视频| 久久久久精品人妻al黑| 最新的欧美精品一区二区| 国产精品女同一区二区软件| 亚洲国产精品国产精品| 亚洲av国产av综合av卡| av在线播放精品| 欧美亚洲日本最大视频资源| 国产又爽黄色视频| 色精品久久人妻99蜜桃| 日日爽夜夜爽网站| 精品视频人人做人人爽| 在线观看免费午夜福利视频| 免费在线观看视频国产中文字幕亚洲 | 又大又黄又爽视频免费| 99久国产av精品国产电影| 乱人伦中国视频| 国产xxxxx性猛交| 成年动漫av网址| 亚洲精品自拍成人| 国产免费一区二区三区四区乱码| 久久毛片免费看一区二区三区| 婷婷色综合大香蕉| 水蜜桃什么品种好| 亚洲人成77777在线视频| 亚洲精品乱久久久久久| 美女视频免费永久观看网站| 男女免费视频国产| 丁香六月欧美| 国产午夜精品一二区理论片| 国产麻豆69| 欧美乱码精品一区二区三区| netflix在线观看网站| 人人妻人人澡人人爽人人夜夜| 青春草视频在线免费观看| 国产日韩欧美在线精品| 日韩电影二区| 欧美激情 高清一区二区三区| 免费少妇av软件| kizo精华| 国产精品av久久久久免费| 久久人妻熟女aⅴ| www.熟女人妻精品国产| 嫩草影视91久久| 国产成人精品无人区| 黄片播放在线免费| 亚洲图色成人| 一级片免费观看大全| 久久久久久久久免费视频了| 国产又爽黄色视频| 日韩不卡一区二区三区视频在线| 国产精品一区二区精品视频观看| 免费高清在线观看日韩| 精品一区二区三区av网在线观看 | 国产免费福利视频在线观看| 男女高潮啪啪啪动态图| 涩涩av久久男人的天堂| 亚洲天堂av无毛| 国产在视频线精品| 久久鲁丝午夜福利片| 日韩中文字幕视频在线看片| 999久久久国产精品视频| 老司机影院毛片| 七月丁香在线播放| 欧美成人精品欧美一级黄| 国产有黄有色有爽视频| 免费观看性生交大片5| 亚洲第一av免费看| 久久久精品国产亚洲av高清涩受| 亚洲欧美日韩另类电影网站| 大话2 男鬼变身卡| 最近的中文字幕免费完整| 成年动漫av网址| 波多野结衣一区麻豆| 欧美日韩国产mv在线观看视频| h视频一区二区三区| av免费观看日本| 丁香六月欧美| 777久久人妻少妇嫩草av网站| e午夜精品久久久久久久| 一级毛片电影观看| 老司机在亚洲福利影院| 美女午夜性视频免费| 国产福利在线免费观看视频| 丰满乱子伦码专区| av不卡在线播放| 成年av动漫网址| 丝袜美腿诱惑在线| 丝袜人妻中文字幕| 狂野欧美激情性xxxx| 一本久久精品| 自线自在国产av| 午夜免费观看性视频| 亚洲男人天堂网一区| av网站免费在线观看视频| 极品人妻少妇av视频| 国产精品一区二区在线不卡| 亚洲精品av麻豆狂野| 亚洲欧美一区二区三区国产| 91成人精品电影| 大香蕉久久网| √禁漫天堂资源中文www| 午夜精品国产一区二区电影| 十八禁人妻一区二区| 99九九在线精品视频| 久久久国产欧美日韩av| 久久精品国产亚洲av涩爱| 观看av在线不卡| 成年人午夜在线观看视频| 五月开心婷婷网| 欧美少妇被猛烈插入视频| 精品亚洲乱码少妇综合久久| 一区在线观看完整版| 一边摸一边抽搐一进一出视频| 国产在线免费精品| 天美传媒精品一区二区| 熟女av电影| av又黄又爽大尺度在线免费看| 一边摸一边抽搐一进一出视频| 午夜福利乱码中文字幕| 五月开心婷婷网| 午夜福利在线免费观看网站| 极品人妻少妇av视频| 一区二区三区乱码不卡18| 日韩 欧美 亚洲 中文字幕| 国产av码专区亚洲av| 中国三级夫妇交换| 久久 成人 亚洲| 亚洲伊人色综图| 午夜福利在线免费观看网站| 日本vs欧美在线观看视频| 亚洲国产最新在线播放| 97在线人人人人妻| 成年美女黄网站色视频大全免费| av片东京热男人的天堂| 99久国产av精品国产电影| 午夜福利乱码中文字幕| 天天操日日干夜夜撸| 色综合欧美亚洲国产小说| 免费黄色在线免费观看| 欧美黑人精品巨大| 国产伦人伦偷精品视频| 自拍欧美九色日韩亚洲蝌蚪91| 老司机亚洲免费影院| 男女无遮挡免费网站观看| 制服诱惑二区| 中文字幕av电影在线播放| 丝袜在线中文字幕| 精品一品国产午夜福利视频| 大陆偷拍与自拍| 一级片'在线观看视频| a级毛片黄视频| 国产一卡二卡三卡精品 | 日韩制服骚丝袜av| 日本av手机在线免费观看| 免费日韩欧美在线观看| 18禁观看日本| 久久精品国产亚洲av涩爱| 一级片免费观看大全| 精品午夜福利在线看| 久久精品国产综合久久久| 欧美日韩亚洲高清精品| 欧美日韩综合久久久久久| 看免费av毛片| 在线精品无人区一区二区三| 亚洲av电影在线观看一区二区三区| 日韩电影二区| 中文字幕色久视频| 女人高潮潮喷娇喘18禁视频| 又大又黄又爽视频免费| 婷婷成人精品国产| 如日韩欧美国产精品一区二区三区| 亚洲欧美一区二区三区国产| 国产精品 国内视频| 欧美人与性动交α欧美软件| 熟女av电影| 高清av免费在线| 伊人久久国产一区二区| 久久久精品国产亚洲av高清涩受| 嫩草影视91久久| 国产 一区精品| 一二三四在线观看免费中文在| 国产成人精品久久久久久| 99九九在线精品视频| 美女高潮到喷水免费观看| 精品第一国产精品| 18禁国产床啪视频网站| 成人影院久久| 欧美 日韩 精品 国产| 精品亚洲乱码少妇综合久久| 精品国产国语对白av| 欧美日韩精品网址| 欧美97在线视频| 香蕉丝袜av| 亚洲婷婷狠狠爱综合网| 国产高清不卡午夜福利| 精品卡一卡二卡四卡免费| 岛国毛片在线播放| 美女福利国产在线| 看十八女毛片水多多多| 亚洲婷婷狠狠爱综合网| 欧美日韩综合久久久久久| 国产成人a∨麻豆精品| 亚洲精品美女久久久久99蜜臀 | 一级毛片我不卡| 亚洲中文av在线| 亚洲色图综合在线观看| 91精品三级在线观看| 成人影院久久| 深夜精品福利| 亚洲 欧美一区二区三区| 国产毛片在线视频| 黄色怎么调成土黄色| 免费在线观看完整版高清| 国产精品欧美亚洲77777| 日韩 欧美 亚洲 中文字幕| 国产免费又黄又爽又色| 欧美日韩福利视频一区二区| 啦啦啦啦在线视频资源| 亚洲精品,欧美精品| 亚洲欧美激情在线| 制服诱惑二区| 久久久久久人人人人人| 亚洲av成人精品一二三区| 成年av动漫网址| 别揉我奶头~嗯~啊~动态视频 | 亚洲欧美激情在线| 这个男人来自地球电影免费观看 | 久久久久精品久久久久真实原创| 久久久久久人妻| 日本一区二区免费在线视频| 99久久人妻综合| 国产国语露脸激情在线看| 国产精品蜜桃在线观看| 一区二区av电影网| 伊人久久大香线蕉亚洲五| bbb黄色大片| 自线自在国产av| 久久久精品国产亚洲av高清涩受| 国产亚洲精品第一综合不卡| xxx大片免费视频| 黑人巨大精品欧美一区二区蜜桃| 欧美在线一区亚洲| 久久性视频一级片| 亚洲一卡2卡3卡4卡5卡精品中文| 国产精品嫩草影院av在线观看| 久久久欧美国产精品| 在线观看免费日韩欧美大片| 一区二区三区四区激情视频| 美女中出高潮动态图| 天天躁夜夜躁狠狠久久av| 欧美久久黑人一区二区| 亚洲精品中文字幕在线视频| 久久av网站| 日日撸夜夜添| 亚洲自偷自拍图片 自拍| 宅男免费午夜| 色综合欧美亚洲国产小说| 日本欧美视频一区| 多毛熟女@视频| av视频免费观看在线观看| 夫妻午夜视频| 国产毛片在线视频| 国产成人免费无遮挡视频| 国产成人精品福利久久| 咕卡用的链子| 国产成人精品无人区| 午夜激情av网站| 亚洲精品日韩在线中文字幕| 欧美亚洲日本最大视频资源| 亚洲美女视频黄频| 国产成人系列免费观看| 国产亚洲午夜精品一区二区久久| 亚洲成人国产一区在线观看 | 久久精品亚洲熟妇少妇任你| 国产女主播在线喷水免费视频网站| 老司机在亚洲福利影院| 国产精品偷伦视频观看了| 在线观看www视频免费| 哪个播放器可以免费观看大片| 久久久久久久国产电影| 一本—道久久a久久精品蜜桃钙片| tube8黄色片| 日韩av免费高清视频| 国产午夜精品一二区理论片| 亚洲精品久久午夜乱码| 成人亚洲欧美一区二区av| 夜夜骑夜夜射夜夜干| 国产成人精品无人区| 少妇人妻精品综合一区二区| 一区在线观看完整版| 韩国精品一区二区三区| xxx大片免费视频| 久久久精品免费免费高清| 国产人伦9x9x在线观看| 啦啦啦 在线观看视频| 亚洲成人手机| 免费女性裸体啪啪无遮挡网站| www日本在线高清视频| 美女大奶头黄色视频| 侵犯人妻中文字幕一二三四区| 久久精品亚洲av国产电影网| 免费黄网站久久成人精品| 十分钟在线观看高清视频www| 男人添女人高潮全过程视频| 成人漫画全彩无遮挡| 亚洲国产日韩一区二区| 99九九在线精品视频| 大话2 男鬼变身卡| 日韩中文字幕欧美一区二区 | 精品一区二区三区av网在线观看 | 久久99热这里只频精品6学生| videosex国产| 亚洲精品日本国产第一区| 亚洲av国产av综合av卡| 中文字幕亚洲精品专区| 精品一区二区免费观看| 黄网站色视频无遮挡免费观看| 在线看a的网站| 91精品伊人久久大香线蕉| 亚洲第一青青草原| 爱豆传媒免费全集在线观看| 晚上一个人看的免费电影| 哪个播放器可以免费观看大片| 久热爱精品视频在线9| 国产精品av久久久久免费| 在线观看国产h片| 亚洲精品一区蜜桃| 久久精品亚洲av国产电影网| 色婷婷久久久亚洲欧美| 黄色一级大片看看| 日日爽夜夜爽网站| 51午夜福利影视在线观看| 97精品久久久久久久久久精品| 欧美日韩视频精品一区| videos熟女内射| 国产亚洲午夜精品一区二区久久| 少妇精品久久久久久久| 欧美少妇被猛烈插入视频| 国产精品二区激情视频| 天天躁日日躁夜夜躁夜夜| 精品福利永久在线观看| 性色av一级| 国产一区二区在线观看av| 美女中出高潮动态图| 黑人欧美特级aaaaaa片| 成人亚洲欧美一区二区av| 国产精品久久久久久精品电影小说| 国产精品成人在线| 乱人伦中国视频| 亚洲精品国产一区二区精华液| 熟女av电影| 丝袜美足系列| 一级片免费观看大全| 丝袜在线中文字幕| 久久久久视频综合| 亚洲男人天堂网一区| 亚洲婷婷狠狠爱综合网| 日韩一本色道免费dvd| 最近的中文字幕免费完整| 久久天躁狠狠躁夜夜2o2o | 亚洲精品国产区一区二| 亚洲人成电影观看| 黄网站色视频无遮挡免费观看| 麻豆av在线久日| 黄色视频在线播放观看不卡| 亚洲欧美精品自产自拍| 我要看黄色一级片免费的| 你懂的网址亚洲精品在线观看| 国产免费一区二区三区四区乱码| 看十八女毛片水多多多| 日日摸夜夜添夜夜爱| 伦理电影大哥的女人| 99久久综合免费| 亚洲成人av在线免费| 欧美日韩av久久| 国产熟女午夜一区二区三区| 亚洲第一av免费看| 久久久久久久精品精品| 亚洲欧美精品自产自拍| 999精品在线视频| 少妇的丰满在线观看| 久久亚洲国产成人精品v| netflix在线观看网站| a级毛片在线看网站| 亚洲专区中文字幕在线 | 国产探花极品一区二区| 国产在视频线精品| 黄片无遮挡物在线观看| 久久久国产欧美日韩av| 久久久久久久久免费视频了| 免费观看av网站的网址| 亚洲精品国产区一区二| av又黄又爽大尺度在线免费看| 国产成人一区二区在线| 2021少妇久久久久久久久久久| 青草久久国产| 亚洲成人免费av在线播放| 国产视频首页在线观看| 最近中文字幕2019免费版| 国产乱来视频区| 女人精品久久久久毛片| 欧美最新免费一区二区三区| 国产亚洲av高清不卡| 亚洲熟女精品中文字幕| 亚洲国产精品国产精品| 成年女人毛片免费观看观看9 | 精品国产超薄肉色丝袜足j| 久久精品久久久久久噜噜老黄| 欧美成人精品欧美一级黄| av免费观看日本| 亚洲国产精品一区三区| 亚洲av综合色区一区| 汤姆久久久久久久影院中文字幕| 亚洲五月色婷婷综合| 国产精品久久久人人做人人爽| 9色porny在线观看| 国产精品麻豆人妻色哟哟久久| 在线观看三级黄色| 欧美av亚洲av综合av国产av | 丰满饥渴人妻一区二区三| av福利片在线| 精品亚洲成a人片在线观看| 最近最新中文字幕免费大全7| 午夜福利视频在线观看免费| 亚洲av福利一区| 另类亚洲欧美激情| 激情五月婷婷亚洲| 国产一区二区三区综合在线观看| 我的亚洲天堂| 久久女婷五月综合色啪小说| av女优亚洲男人天堂| 91aial.com中文字幕在线观看| 亚洲国产精品国产精品| 中文精品一卡2卡3卡4更新| 日韩一区二区视频免费看| www.精华液| 午夜免费男女啪啪视频观看| 欧美久久黑人一区二区| 国产探花极品一区二区| 久久国产亚洲av麻豆专区| 男女下面插进去视频免费观看| 亚洲精品久久午夜乱码| 国产成人精品在线电影| 久久久久精品性色| 国产黄频视频在线观看| 伊人久久国产一区二区| svipshipincom国产片| 欧美激情极品国产一区二区三区| 夜夜骑夜夜射夜夜干| 男女边摸边吃奶| 自线自在国产av| 免费久久久久久久精品成人欧美视频| 亚洲男人天堂网一区| 欧美乱码精品一区二区三区| 伊人亚洲综合成人网| 美女视频免费永久观看网站| 日韩制服骚丝袜av| 日韩电影二区| 日本av手机在线免费观看| 中文字幕人妻丝袜制服| 黄网站色视频无遮挡免费观看| 亚洲美女视频黄频| 国产精品麻豆人妻色哟哟久久| 国产成人啪精品午夜网站| 亚洲欧美成人精品一区二区| 亚洲成人手机| 亚洲激情五月婷婷啪啪| 纯流量卡能插随身wifi吗| 日韩一卡2卡3卡4卡2021年| 日韩电影二区| 中国国产av一级| videosex国产| 国产精品99久久99久久久不卡 | 免费黄网站久久成人精品| 中文字幕色久视频| 欧美人与善性xxx| 丝袜美足系列| 一级,二级,三级黄色视频| 晚上一个人看的免费电影| 久久久久国产一级毛片高清牌| 高清视频免费观看一区二区| 中文字幕精品免费在线观看视频| 亚洲av国产av综合av卡| 丝瓜视频免费看黄片| 一级片'在线观看视频| 99国产精品免费福利视频| av不卡在线播放|