• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Calibration and compensation methods of installation error of electronic compass

    2013-12-20 07:22:14FANChengye范成葉LIJieJINGZengzeng景增增ZHANGXiaoming張曉明
    關鍵詞:張曉明

    FAN Cheng-ye (范成葉), LI Jie (李 杰),2, JING Zeng-zeng (景增增), ZHANG Xiao-ming (張曉明),2

    (1. Science and Technology on Electronic Test & Measurement Laboratory,North University of China,Taiyuan 030051, China;2. Key Laboratory of Instrumentation Science & Dynamic Measurement (North University of China), Ministry of Education, Taiyuan 030051, China)

    Calibration and compensation methods of installation error of electronic compass

    FAN Cheng-ye (范成葉)1, LI Jie (李 杰)1,2, JING Zeng-zeng (景增增)1, ZHANG Xiao-ming (張曉明)1,2

    (1. Science and Technology on Electronic Test & Measurement Laboratory,North University of China,Taiyuan 030051, China;2. Key Laboratory of Instrumentation Science & Dynamic Measurement (North University of China), Ministry of Education, Taiyuan 030051, China)

    Installation error angle is one of the factors that affect the accuracy of electronic compass used for geomagnetic navigation. To solve this problem, the calibration and compensation methods for installation error angle are studied. By analyzing the generation mechanism of installation error angle of electronic compass, an installation error model is established, compensation formulae are derived, and calibration scheme is proposed. To verify the correctness of the calibration and compensation methods, the verification experiment is conducted by computer simulation. The simulation results show that the proposed calibration and compensation methods are effective and practical.

    geomagnetic navigation; electronic compass; installation error; calibration and compensation

    CLD number: TM930.1 Document code: A

    An electronic compass is a measuring instrument that can read differences in the Earth's magnetic field. It has advantages of small size, low power consumption and no cumulative error, so it has been widely used in the field of geomagnetic navigation. Not considering manufacturing error and other errors, the electronic compass inevitably has installation error in practical applications, which results in very large measurement error and low precision. HMR3300 is an intelligent electronic compass module designed by Honeywell with a MEMS accelemeter for a horizontal three-axis and tilt compensated precision compass for performance up to a ±60° tilt range. HMC1022 is also designed by Honeyell, which is a two-axis magnetic sensor that utilizes anisotropic magnetoresistive (AMR) technology to measure direction and magnitude of Earth's magnetic fields[1,2]. Here, by analyzing the mechanism of installation error angle, the corresponing calibration and compensation methods are studied.

    1 Installation error modeling

    1.1 Installation error analysis

    Generally, electronic compass is installed on the carrier in strap-down way. In the process of installation, due to the limitations of manufacturing technology and processes[3-6], three-axis measurement coordinate system can not completely coincide with or parallel the carrier coordinate system. Therefore, there are always installation error angles[7-9]. As shown in Fig.1, X0,Y0and Z0denote ideal three axes paralleling three axes of the carrier. When electronic compass is mounted on a carrier, X, Y and Z denote the actual directions of three axes[10]. In Fig.1, α represents the angle between X axis and X0axis, and β represents the angle between Y axis and Y0axis, where α and β are called electronic compass misalignment angles.

    Fig.1 Mechanism of installation error angle

    1.2 Installation error modeling

    After electronic compass is mounted on the carrier, generally there are two misalignment angles. Firstly, giving an assumption that there exists a single installation error angle, by analyzing the influence of this error on magnetic data, a measurement method for a single installation error angle is proposed. Based on this method, the method for two installation error angles can be derived. Considering a signle installation error angle, the relationship between three measurement axes and those of the carrer coordinate system is shown in Fig.2.

    Fig.2 Single installation error angle

    When there are two installation error angles (see Fig.1). Only considering installation error, the coordinate transformation from OXYZ to OX0Y0Z0can be achieved as follows. OXYZ rotates around X axis and Y axis for angle α and β, respectively, and then vector coordinates OX0Y0Z0is got.

    Coordinate transformation equation is

    Misalignment angles are determined after the electronic compass is installed on the carrier. If the installation error angles α and β can be accurately calibrated, the measured output values of electronic compass can be compensated well. Generally, installation error angles are in the range of ±20′, which are very small. Therefore, by simplifying Eq.(1), the installation error compensation equation can be written as

    1.3 Solution of misalignment angles

    Because the installation error angles are very small, one of the two angles, α or β can be ignored firstly, then the other angle is solved. When there exist two installation error angles simultaneously, magnetic field strength in the directions of X and Z on XOZ plane is distorted from a straight line not in parallel with X axis into an ellipse, which is axisymmetric about the line. The distortion is caused by another installation error angle, so one misalignment angle can be solved using the above described method by ignoring another misalignment angle with least square fitting method.

    1.4 Simulation analysis

    To verify the correctness of the method for solving misalignment angles, a theoretical simulation experiment is conducted. Assume that the three-axis magnetic field strength measured in the horizontal direction is from 134.845 43 T to 0.171 86 T, when there are two misalignment angles: α=5°, β=10°, after rotating for a circle, the three-axis magnetic field strength is shown in Fig.3.

    Fig.3 Three-axis magnetic field strength

    It can be seen from Fig.3 that the magnetic field strength on XOZ plane changes from a straight line in parallel with the abscissa to an ellipse. Through fitting misalignment angles with least square fitting method, α and β can be got: α1=4.924 4°, β1=9.923 7°, which are close to the values set in advance. Compensating the magnetic data for installation error angles based on Eq.(2), the new magnetic data is got. Simlarly, using the above method to solve the second installation error angle, the results are: α2=0.075 6°, β2=0.076 0°. The two fitting results add together, the final installation error angle are α=5°, β=9.999 7°, which substantially are equal to the predetermined installation error angle. Three-axis magnetic field strength of installation error angle after compensation is drawn in Fig.4.

    Fig.4 Three-axis magnetic field strength after compensation

    As shown in Fig.4, the magnetic data after the compensation for misalignment angles coincide with the original data. In the direction of Z axis, the magnetic field strength remains unchanged, which indicates that the method to solve installation error angle is correct and effective.

    2 Calibration of misalignment angles

    2.1 Discussion on calibration plane

    The derivation of the above described method is based on the assumption that the carrier rotates in the horizontal plane. But in practical operation, implementation of the method is limited due to the horizontal plane. It needs to be discussed that whether the method can be used in any plane to calibrat and calculate the misalignment angles.

    Suppose that three measurement axes are pairwise orthogonal and there are no sensitivity error and bias error. No matter carrier is in any plane, installation error between the electronic compass and carrier will not exist. When the electronic compass rotates 360°around Z axis, magnetic field component in the direction of Z axis is unchanged because Z axis is always have an angle of 90° with the plane. Magnetic field components in the X axis and Y axis directions are the sinusoidal, and the two axes are mutually orthogonal. It is similar to the case the carrier is mounted on the horizontal plane. When there exist misalignment angles, the carrier rotates for a circle, the corresponding 3D magnetic filed strength changes from a straight line distribution in the XOZ and YOZ planes to an ellipse, which is similar to the variation of the carrier magnetic field strength in the horizontal plane. Thus installation error angle calibration and calculation methods proposed in this paper are applicable in any plane.

    2.2 Design of calibration scheme

    1) Select the relatively clean magnetic environment and an arbitrarily plane. Electronic compass is rotated for 360° in the plane, the magnetic field strengths in three-axis directions can be acquired.

    2) According to the magnetic field strengths in both directions of Y and Z, using the least square method to fit the slope of straight line, β1is calculated.

    3) α1is calculated according to magnetic field strengths in the directions of X and Z.

    4) According to Eq.(2), the installation error angle compensation is calculated and the installation angle errors α2and β2are calculated again.

    5) Final calculated misalignment angles are α=α1+α2, β=β1+β2.

    6) 3D magnetic field strengths after compensation are calculated.

    The installation error angles solved by least square fitting method is an approximation of the actual values, and this progressive approximation method can be used for accurate calibration. The obtained misalignment angles can be compensated again. After several calculations and compensations, the calculated misalignment angles can infinitely approach to the actual installation error angles.

    3 Experiments and results

    In order to verify the correctness and validity of the installation error angle calibration and compensation methods, HMC3300 is used to conduct the verification experiment. The installation error produces when electronic compass is fixed to the plane, because the plane formed by X axis and Y axis is not parallel with actual plane. With the above described method, electronic compass installation error angle calibration tests in different inclination planes are carried out, the results are shown in Table 1.

    In Table 1, the calibration results of installation error angles in planes 1 to 3 are basically the same, but in plane 4, they are quite different from those in other planes.

    Table 1 Installation error angle calibration results

    It can be seen that the changes in magnetic field strength in plane 4 are significantly less than the remaining three groups of measurement results, and the absolute values of the magnetic field strength in the direction of Z axis are greater than the other three groups.

    Fig.5 Magnetic field strengths before and after compensations

    When the calibration plane is parallel to the geomagnetism vector, the magnetic field vectors in X axis and Y axis directions are close to zero. Rotating for a circle, because the change of magnetic field strength caused by installation error is close to the measurement error of the sensor itself, the changes of magnetic field strength can not reflect the changes of the magnetic field strength of each axis caused by installation error angle. The reason is that plane 4 is nearly parallel to the geomagnetic vector field, resulting in that the installation angle error has a bias. Similarly, when the calibration plane is perpendicular to the ground magnetic field vector, since there is a small change of magnetic field vector in the direction of Z axis, the obtained installation error angle will also have a certain bias compared with the actual one. Therefore, the calibration plane preferably has an inclination angle of 45°. In this case the installation angle deviation error measured is the smallest. The misalignment error angle after calibration in plane 1 is selected to compensate, the result is shown in Fig.5. It can be seen from Fig.5, after the compensation, the variation of the magnetic field strength in the direction of Z axis decreases, so compensation effect is obvious.

    4 Conclusion

    Calibration and compensation for installation angle error of electronic compass can guarantee measurement accuracy of geomagnetic navigation system. The method mentioned in this paper for installation error calibration is simple and easy to be implemented. So it can be widely used for rapid calibration and compensation for misalignment angles of electronic compass.

    [1] DU Ying, LI Jie, KONG Xiang-lei, et al. Error compensation research for electronic compass with non-heading reference,Chinese Journal of Sensors and Actuators, 2010, 9: 1285-1288.

    [2] XIAO Chang-han, HE Hua-hui. An analysis method of magnetic field data from the non-idealy placed 3 axial magnetometer sensor. Journal of the Naval Academy of Engineering, 1996, 76(3): 7-12.

    [3] LI Ren, CHEN Xi-jun, ZENG Qing-shuang. Error analysis of rotating strapdown inertial navigation system. Journal of Harbin Institute of Technology, 2010, (3): 368-372.

    [4] CHEN Guang, SUN Zhi-liang, SUN Hai-zhu. Curve fitting in least-square method and its realization with Matlab. Ordnance Industry Automation, 2005, (3): 107-108.

    [5] LI Shu-hua, SHAO Yong. Application of digital compass HMR3000 in the vehicular equipment. Electro-Optic Technology Application, 2010, 25(3): 13-17.

    [6] YAN Bei, WANG Bin, LI Yuan. Optimal ellipse fitting method based on least-square principle. Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(3): 295-297.

    [7] LI Qing-de, Griffiths J G.. Least square ellipsoid specific fitting. In: Proceedings of IEEE Geometric Modeling and Processing, Beijing, 2004: 335-340.

    [8] Hepner D,Harkins T. Determining inertial orientation of a spinning body with body-fixed sensor. ARLTR-2313, 2001: 7-11.

    [9] Grammalidis N, Strintzis M G. Head detection and tracking by 2-D and 3-D ellipsoid fitting. In: Proceedings of IEEE Computer Graphics International, Geneva, Swiss, 2000: 221-226.

    [10] Xensor Integration Corporation. Earth magnetic filed sensor XEN-1200. 2007.

    date: 2013-09-15

    Natural Science Foundation of Shanxi Province (No.2010011022-4)

    FAN Cheng-ye (fanchengye125@126.com)

    1674-8042(2013)04-0313-04

    10.3969/j.issn.1674-8042.2013.04.002

    猜你喜歡
    張曉明
    立秋
    紅碼
    振興鄉村唱起來
    心聲歌刊(2022年1期)2022-06-06 10:30:38
    武林春 ? 三月
    張曉明:流量決定勝負!三大流量高地裂變無限可能!
    Debate breaks the mindset 辯論打破思維定式
    張曉明:樞紐中心就是城市目的地,廣州東部占據黃金A字頂端!
    張曉明:“任意門”開創軌交居住時代,大灣區從萬頃沙出發!
    水螅細胞外基質及其在發生和再生中的作用
    Error modeling and analysis of inclinometer based on digital accelerometer
    不卡视频在线观看欧美| 男人舔女人的私密视频| 亚洲成国产人片在线观看| 精品酒店卫生间| 丁香六月天网| 久久久久网色| av一本久久久久| 免费播放大片免费观看视频在线观看| 日本免费在线观看一区| 亚洲伊人色综图| 欧美人与性动交α欧美软件 | 国内精品宾馆在线| 91久久精品国产一区二区三区| 国产精品偷伦视频观看了| 亚洲在久久综合| 成年女人在线观看亚洲视频| 国产片特级美女逼逼视频| 亚洲精品国产色婷婷电影| 欧美精品一区二区免费开放| 久久久久国产网址| 乱人伦中国视频| 王馨瑶露胸无遮挡在线观看| 又大又黄又爽视频免费| 国产av精品麻豆| 久久毛片免费看一区二区三区| 丁香六月天网| 中文乱码字字幕精品一区二区三区| 国产日韩一区二区三区精品不卡| 国产男人的电影天堂91| 制服丝袜香蕉在线| 久久久精品免费免费高清| 国产黄色视频一区二区在线观看| 在线观看三级黄色| 国产黄频视频在线观看| 成人免费观看视频高清| 丁香六月天网| 日韩制服丝袜自拍偷拍| 亚洲国产最新在线播放| 欧美bdsm另类| 你懂的网址亚洲精品在线观看| av视频免费观看在线观看| 欧美丝袜亚洲另类| 国产精品99久久99久久久不卡 | 如何舔出高潮| a 毛片基地| 国产精品久久久久久精品电影小说| 91久久精品国产一区二区三区| 波多野结衣一区麻豆| 久久久久久久久久久久大奶| 大话2 男鬼变身卡| 免费人成在线观看视频色| 免费看av在线观看网站| 男女高潮啪啪啪动态图| 99热国产这里只有精品6| 2022亚洲国产成人精品| www.av在线官网国产| 韩国精品一区二区三区 | 国产伦理片在线播放av一区| 国产免费又黄又爽又色| 国产精品熟女久久久久浪| 精品一区在线观看国产| 日韩精品有码人妻一区| 全区人妻精品视频| 午夜精品国产一区二区电影| av在线播放精品| 大片电影免费在线观看免费| 欧美bdsm另类| 亚洲精品乱久久久久久| 亚洲内射少妇av| 日韩三级伦理在线观看| 一区在线观看完整版| 伊人亚洲综合成人网| av.在线天堂| 高清黄色对白视频在线免费看| 亚洲中文av在线| 亚洲人成网站在线观看播放| av线在线观看网站| 韩国精品一区二区三区 | 亚洲经典国产精华液单| 蜜桃在线观看..| 少妇的逼水好多| 在线观看人妻少妇| 麻豆精品久久久久久蜜桃| 老司机影院成人| av天堂久久9| 国产精品偷伦视频观看了| 免费少妇av软件| 久久99热6这里只有精品| 久久国内精品自在自线图片| 久久影院123| 久久久久人妻精品一区果冻| xxx大片免费视频| 日本vs欧美在线观看视频| 日韩中字成人| 成人国产麻豆网| 欧美精品一区二区免费开放| a级毛片在线看网站| 亚洲精品,欧美精品| 熟女电影av网| 人妻一区二区av| 免费人成在线观看视频色| 老女人水多毛片| 亚洲伊人色综图| 十八禁高潮呻吟视频| 久久久久久久大尺度免费视频| 中文字幕免费在线视频6| 欧美日韩亚洲高清精品| av线在线观看网站| 女人被躁到高潮嗷嗷叫费观| 久久精品久久久久久久性| 曰老女人黄片| 水蜜桃什么品种好| 丝袜脚勾引网站| 欧美日韩国产mv在线观看视频| 日韩一本色道免费dvd| 日韩成人伦理影院| av在线老鸭窝| 亚洲人与动物交配视频| 欧美精品亚洲一区二区| 侵犯人妻中文字幕一二三四区| 国产精品嫩草影院av在线观看| 亚洲四区av| 少妇熟女欧美另类| 国产精品熟女久久久久浪| 一级毛片我不卡| 日韩免费高清中文字幕av| 黄色毛片三级朝国网站| 成人18禁高潮啪啪吃奶动态图| www.熟女人妻精品国产 | 下体分泌物呈黄色| 国内精品宾馆在线| 女性被躁到高潮视频| 欧美xxxx性猛交bbbb| 国产日韩欧美视频二区| av不卡在线播放| 精品国产国语对白av| 99热全是精品| 久久久久久人人人人人| 在线观看www视频免费| 在现免费观看毛片| 女性被躁到高潮视频| 亚洲国产精品成人久久小说| av福利片在线| 久久99蜜桃精品久久| 欧美bdsm另类| 国产国语露脸激情在线看| 国产麻豆69| 最近最新中文字幕免费大全7| 制服人妻中文乱码| 99久久综合免费| 亚洲国产最新在线播放| 我要看黄色一级片免费的| 成人无遮挡网站| 午夜91福利影院| 9191精品国产免费久久| av卡一久久| 国语对白做爰xxxⅹ性视频网站| 国语对白做爰xxxⅹ性视频网站| 侵犯人妻中文字幕一二三四区| 九色亚洲精品在线播放| 少妇 在线观看| 久久精品夜色国产| 97在线人人人人妻| 亚洲国产看品久久| 久久久欧美国产精品| 国产免费又黄又爽又色| 成人综合一区亚洲| 午夜免费观看性视频| 亚洲精华国产精华液的使用体验| 老司机影院毛片| 美女脱内裤让男人舔精品视频| 国产成人精品久久久久久| 亚洲精品自拍成人| 黄片无遮挡物在线观看| 99香蕉大伊视频| 色婷婷av一区二区三区视频| 女人精品久久久久毛片| 一本—道久久a久久精品蜜桃钙片| 激情五月婷婷亚洲| 精品国产国语对白av| 9热在线视频观看99| 久久久久久人人人人人| 成年女人在线观看亚洲视频| 在线天堂中文资源库| 午夜福利在线观看免费完整高清在| 91午夜精品亚洲一区二区三区| 最黄视频免费看| 一级a做视频免费观看| 国产精品女同一区二区软件| 一区二区三区乱码不卡18| 日韩 亚洲 欧美在线| 美女视频免费永久观看网站| 18禁动态无遮挡网站| 亚洲国产精品国产精品| 久久精品熟女亚洲av麻豆精品| 中文字幕另类日韩欧美亚洲嫩草| 久久精品人人爽人人爽视色| 日本-黄色视频高清免费观看| 国产黄频视频在线观看| av片东京热男人的天堂| 九色成人免费人妻av| 两个人看的免费小视频| av电影中文网址| 熟女人妻精品中文字幕| 欧美日韩亚洲高清精品| 丁香六月天网| h视频一区二区三区| 看免费成人av毛片| 欧美日韩综合久久久久久| 久久99蜜桃精品久久| 99热国产这里只有精品6| 99热网站在线观看| 精品一区在线观看国产| 亚洲欧美清纯卡通| 亚洲欧美日韩另类电影网站| 国产日韩欧美亚洲二区| 国产精品.久久久| 男的添女的下面高潮视频| 超色免费av| 欧美日韩精品成人综合77777| 午夜福利在线观看免费完整高清在| 视频区图区小说| 久久久国产一区二区| 伦理电影免费视频| 精品一区在线观看国产| 人人妻人人澡人人看| 亚洲av男天堂| 两个人看的免费小视频| 免费日韩欧美在线观看| a 毛片基地| 亚洲精品456在线播放app| 国产成人精品一,二区| 少妇被粗大的猛进出69影院 | av视频免费观看在线观看| 人体艺术视频欧美日本| 久久99精品国语久久久| 午夜久久久在线观看| 国产成人免费无遮挡视频| 久热久热在线精品观看| 国产毛片在线视频| 美女国产高潮福利片在线看| 欧美成人精品欧美一级黄| 成人综合一区亚洲| 亚洲成色77777| 欧美日韩视频精品一区| 欧美性感艳星| 性色av一级| 亚洲欧美成人精品一区二区| 一级,二级,三级黄色视频| 亚洲经典国产精华液单| 男女边摸边吃奶| 国产精品免费大片| 日日爽夜夜爽网站| 精品99又大又爽又粗少妇毛片| 秋霞伦理黄片| 国产免费一级a男人的天堂| 一级毛片电影观看| 精品亚洲成国产av| 亚洲精品,欧美精品| 最后的刺客免费高清国语| 亚洲精品一二三| 桃花免费在线播放| 18禁动态无遮挡网站| av网站免费在线观看视频| 亚洲 欧美一区二区三区| 成年动漫av网址| 免费在线观看黄色视频的| 欧美精品亚洲一区二区| 老司机影院毛片| 美女xxoo啪啪120秒动态图| 涩涩av久久男人的天堂| 亚洲欧美成人综合另类久久久| 久久精品夜色国产| 久久99一区二区三区| 免费观看无遮挡的男女| 亚洲国产精品999| 亚洲av福利一区| 少妇熟女欧美另类| 老女人水多毛片| 99热全是精品| 青春草视频在线免费观看| 午夜福利网站1000一区二区三区| 两性夫妻黄色片 | 日日爽夜夜爽网站| 国产爽快片一区二区三区| 亚洲精品美女久久av网站| 久久精品国产自在天天线| 日韩中文字幕视频在线看片| 日本av手机在线免费观看| 亚洲精品成人av观看孕妇| 成年动漫av网址| 国产熟女欧美一区二区| 国产精品无大码| 欧美国产精品一级二级三级| 亚洲欧美清纯卡通| 亚洲av综合色区一区| 亚洲国产毛片av蜜桃av| 国产精品一区二区在线观看99| 久久久久久久久久久久大奶| 国产麻豆69| 久久韩国三级中文字幕| 亚洲精品中文字幕在线视频| 亚洲国产看品久久| 交换朋友夫妻互换小说| 久久这里只有精品19| 成人漫画全彩无遮挡| 久久久久精品性色| 免费黄频网站在线观看国产| 中文字幕另类日韩欧美亚洲嫩草| av又黄又爽大尺度在线免费看| 最近中文字幕高清免费大全6| 亚洲国产色片| 91成人精品电影| 大香蕉久久网| 亚洲熟女精品中文字幕| 精品第一国产精品| 国产成人aa在线观看| 在线观看一区二区三区激情| 欧美老熟妇乱子伦牲交| 午夜福利网站1000一区二区三区| 亚洲精品色激情综合| 91精品国产国语对白视频| 亚洲av综合色区一区| 中国美白少妇内射xxxbb| 天天躁夜夜躁狠狠久久av| 国产精品免费大片| 免费黄色在线免费观看| 欧美 日韩 精品 国产| 亚洲中文av在线| 国产精品偷伦视频观看了| 国产精品欧美亚洲77777| 黄色视频在线播放观看不卡| 精品国产一区二区三区四区第35| 99国产精品免费福利视频| 天堂中文最新版在线下载| 中文欧美无线码| 国产亚洲欧美精品永久| 色婷婷久久久亚洲欧美| 亚洲第一av免费看| 国产av码专区亚洲av| 亚洲国产欧美在线一区| 精品卡一卡二卡四卡免费| 久久久久久久大尺度免费视频| 亚洲,欧美精品.| 国产黄色免费在线视频| 欧美性感艳星| 久久99热6这里只有精品| 在线观看免费视频网站a站| 国产免费福利视频在线观看| 一本色道久久久久久精品综合| 99久久综合免费| 国产深夜福利视频在线观看| 国产探花极品一区二区| 久久99精品国语久久久| 午夜激情久久久久久久| 国产精品99久久99久久久不卡 | 在线天堂最新版资源| 一本—道久久a久久精品蜜桃钙片| 少妇猛男粗大的猛烈进出视频| 天天躁夜夜躁狠狠躁躁| 91午夜精品亚洲一区二区三区| 视频区图区小说| 卡戴珊不雅视频在线播放| 高清在线视频一区二区三区| 熟女电影av网| 一本色道久久久久久精品综合| 国语对白做爰xxxⅹ性视频网站| 国产色爽女视频免费观看| 欧美xxⅹ黑人| 一级a做视频免费观看| 在线免费观看不下载黄p国产| 另类亚洲欧美激情| 日产精品乱码卡一卡2卡三| 国产男女内射视频| 少妇人妻精品综合一区二区| 只有这里有精品99| 2018国产大陆天天弄谢| 欧美日韩av久久| 日韩视频在线欧美| 亚洲第一区二区三区不卡| 亚洲精品色激情综合| 九色亚洲精品在线播放| 热99久久久久精品小说推荐| 亚洲精品,欧美精品| xxxhd国产人妻xxx| 午夜福利视频在线观看免费| 看免费成人av毛片| 美女国产视频在线观看| 一二三四在线观看免费中文在 | 国产永久视频网站| 少妇猛男粗大的猛烈进出视频| 欧美精品高潮呻吟av久久| 男女免费视频国产| 日本爱情动作片www.在线观看| 韩国高清视频一区二区三区| 国产在线免费精品| 少妇的逼好多水| 久久久精品区二区三区| 亚洲,欧美,日韩| 美女国产视频在线观看| 性色avwww在线观看| 国产xxxxx性猛交| av在线观看视频网站免费| 99久久综合免费| 亚洲丝袜综合中文字幕| 国产极品天堂在线| 国产亚洲最大av| 亚洲精品成人av观看孕妇| 两个人免费观看高清视频| 欧美日韩成人在线一区二区| 在线观看免费高清a一片| 国产日韩欧美在线精品| 91午夜精品亚洲一区二区三区| av在线播放精品| 精品亚洲成a人片在线观看| 欧美精品人与动牲交sv欧美| 国产日韩一区二区三区精品不卡| 天天躁夜夜躁狠狠躁躁| 色网站视频免费| 黑人欧美特级aaaaaa片| 亚洲图色成人| 中文天堂在线官网| 天美传媒精品一区二区| 国产乱人偷精品视频| 亚洲一码二码三码区别大吗| 亚洲欧洲精品一区二区精品久久久 | 一级,二级,三级黄色视频| 制服人妻中文乱码| 中文字幕亚洲精品专区| 亚洲av欧美aⅴ国产| 久久久久久久精品精品| 久久久国产欧美日韩av| 永久免费av网站大全| 欧美国产精品一级二级三级| 少妇 在线观看| a级片在线免费高清观看视频| 国产精品无大码| 一二三四中文在线观看免费高清| 香蕉精品网在线| 日本黄大片高清| 一级毛片电影观看| 亚洲国产精品国产精品| 国产成人精品无人区| 国产成人av激情在线播放| 国产在线一区二区三区精| av网站免费在线观看视频| 卡戴珊不雅视频在线播放| 乱人伦中国视频| 成人毛片a级毛片在线播放| av在线播放精品| 免费少妇av软件| 国产精品无大码| videossex国产| 久久久欧美国产精品| 成人手机av| 国语对白做爰xxxⅹ性视频网站| 久久久精品免费免费高清| 伊人亚洲综合成人网| 久久午夜综合久久蜜桃| 99热6这里只有精品| 韩国av在线不卡| av在线老鸭窝| 成年av动漫网址| 欧美精品人与动牲交sv欧美| 超色免费av| 黄色怎么调成土黄色| 国产乱来视频区| 欧美xxⅹ黑人| 99热网站在线观看| 美女国产高潮福利片在线看| 欧美亚洲日本最大视频资源| 有码 亚洲区| 热re99久久精品国产66热6| 人人妻人人爽人人添夜夜欢视频| 午夜激情久久久久久久| 国产精品国产三级国产专区5o| 一级毛片黄色毛片免费观看视频| 一本—道久久a久久精品蜜桃钙片| 久久综合国产亚洲精品| 欧美日韩亚洲高清精品| 80岁老熟妇乱子伦牲交| 91午夜精品亚洲一区二区三区| 亚洲国产最新在线播放| 国产亚洲av片在线观看秒播厂| 最近最新中文字幕大全免费视频 | 国产免费现黄频在线看| 最新中文字幕久久久久| 在线 av 中文字幕| 全区人妻精品视频| 国产精品欧美亚洲77777| 成人亚洲欧美一区二区av| 丝袜人妻中文字幕| 久久青草综合色| 精品99又大又爽又粗少妇毛片| 只有这里有精品99| 毛片一级片免费看久久久久| 国产精品久久久久久久久免| 成人亚洲欧美一区二区av| 国产成人91sexporn| 欧美另类一区| 国产高清三级在线| 伊人亚洲综合成人网| 丝袜美足系列| 男女午夜视频在线观看 | 亚洲av男天堂| 高清欧美精品videossex| 美女视频免费永久观看网站| 男女啪啪激烈高潮av片| 久久97久久精品| 国产色婷婷99| 久久久久久久大尺度免费视频| 精品酒店卫生间| av片东京热男人的天堂| 国产精品熟女久久久久浪| 亚洲三级黄色毛片| av片东京热男人的天堂| 美女国产高潮福利片在线看| 女性生殖器流出的白浆| 久久久国产一区二区| videos熟女内射| 大香蕉久久成人网| 51国产日韩欧美| 女人久久www免费人成看片| 国产成人免费无遮挡视频| 高清在线视频一区二区三区| 大香蕉久久成人网| 国产老妇伦熟女老妇高清| 亚洲,欧美,日韩| 菩萨蛮人人尽说江南好唐韦庄| 久久精品国产亚洲av天美| 精品国产乱码久久久久久小说| 国产老妇伦熟女老妇高清| 亚洲av日韩在线播放| 少妇猛男粗大的猛烈进出视频| 国产精品一区二区在线观看99| av在线播放精品| 女性生殖器流出的白浆| 91aial.com中文字幕在线观看| 热re99久久国产66热| 欧美激情极品国产一区二区三区 | 亚洲av电影在线观看一区二区三区| tube8黄色片| 五月玫瑰六月丁香| 精品亚洲成a人片在线观看| 日韩制服骚丝袜av| 一级黄片播放器| 日韩av不卡免费在线播放| 免费观看无遮挡的男女| 国产日韩一区二区三区精品不卡| 亚洲精品av麻豆狂野| 成人午夜精彩视频在线观看| 亚洲国产av新网站| 久久精品国产亚洲av天美| 国产精品成人在线| 久久精品久久久久久久性| 狠狠婷婷综合久久久久久88av| av国产久精品久网站免费入址| 80岁老熟妇乱子伦牲交| 大片电影免费在线观看免费| 国产无遮挡羞羞视频在线观看| 亚洲精品视频女| 天堂8中文在线网| 久久精品国产a三级三级三级| 99香蕉大伊视频| 精品少妇内射三级| 国产又色又爽无遮挡免| 久久精品久久久久久噜噜老黄| 丝袜在线中文字幕| av网站免费在线观看视频| 春色校园在线视频观看| 成年人免费黄色播放视频| 午夜免费鲁丝| 免费人成在线观看视频色| 最近最新中文字幕免费大全7| 久久精品久久久久久久性| 久久免费观看电影| 久久青草综合色| 亚洲国产精品999| 国产片内射在线| 美女国产高潮福利片在线看| a级片在线免费高清观看视频| 亚洲国产精品专区欧美| 热re99久久精品国产66热6| 黄片无遮挡物在线观看| 亚洲av综合色区一区| 亚洲av国产av综合av卡| 少妇人妻精品综合一区二区| 91精品三级在线观看| 十分钟在线观看高清视频www| 国产无遮挡羞羞视频在线观看| 亚洲美女黄色视频免费看| 51国产日韩欧美| 久久99蜜桃精品久久| 亚洲欧美清纯卡通| 香蕉丝袜av| 午夜免费鲁丝| 久久久久精品人妻al黑| 制服人妻中文乱码| 97超碰精品成人国产| 亚洲欧洲国产日韩| 国产日韩欧美视频二区| 在线看a的网站| 国产av国产精品国产| 国产精品久久久av美女十八| 男人操女人黄网站| 晚上一个人看的免费电影| 欧美xxⅹ黑人| 97人妻天天添夜夜摸| 国产免费又黄又爽又色| 亚洲精品日韩在线中文字幕| 色婷婷久久久亚洲欧美| 欧美精品人与动牲交sv欧美| 18禁在线无遮挡免费观看视频| 久久久久久久久久人人人人人人| 日韩成人av中文字幕在线观看|