• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Compressive property and energy absorption characteristic of interconnected porous Mg-Zn-Y alloys with adjusting Y addition

    2024-04-18 13:44:22LiuLiuWngSunLiuHn
    Journal of Magnesium and Alloys 2024年1期

    J.A.Liu ,S.J.Liu ,B.Wng ,W.B.Sun ,X.J.Liu ,Z.W.Hn

    aCollege of Materials Science and Engineering, Key Laboratory of Automobile Materials (Ministry of Education), Jilin University, Changchun 130022, PR China

    b Key Laboratory of Bionic Engineering (Ministry of Education), College of Biological and Agricultural Engineering, Jilin University, Changchun, 130022,PR China

    cWeihai Institute for Bionics-Jilin University, Weihai 264205, PR China

    Abstract In this study,interconnected porous Mg-2Zn-xY alloys with different phase compositions were prepared by various Y additions (x=0.4,3,and 6 wt.%) to adjust the compressive properties and energy absorption characteristics.Several characterization methods were then applied to identify the microstructure of the porous Mg-Zn-Y and describe the details of the second phase.Compressive tests were performed at room temperature (RT),200°C,and 300°C to study the impact of the Y addition and testing temperature on the compressive properties of the porous Mg-Zn-Y.The experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second phase.When the Y content increases,different Mg-Zn-Y ternary phases appear: I-phase (Mg3Zn6Y),W-phase(Mg3Zn3Y2),and LPSO phase (Mg12ZnY).When the Y content ranges between 0.4% and 6%,the compressive strength increases from 6.30 MPa to 9.23 MPa,and the energy absorption capacity increases from 7.33 MJ/m3 to 10.97 MJ/m3 at RT,which is mainly attributed to the phase composition and volume fraction of the second phase.However,the average energy absorption efficiency is independent of the Y content.In addition,the compressive deformation behaviors of the porous Mg-Zn-Y are altered by the testing temperature.The compressive strength and energy absorption capacity of the porous Mg-Zn-Y decrease due to the softening effect of the high temperature on the struts.The deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

    Keywords: Porous magnesium;Rare earth elements;Microstructure;Compressive behavior;Energy absorption characteristic.

    1.Introduction

    As a special type of metal material,the interconnected porous magnesium alloys,also known as open-cell Mg foams,combine several structural and functional performances,including super-lightweight,high strength-to-weight ratio,good damping,high energy absorption,suitable biocompatibility,and high acoustic absorption [1–3].Therefore,they are applied in the biomedical,building,and transportation industries[4–8].When applied in these fields,the Mg foam should have high mechanical properties under the premise of low density.The compressive property is crucial for the evaluation of the application because porous metals could absorb a large amount of deformation energy under almost constant stress levels in a wide range of strains (approximately 0.5) [5,6,8].However,the porous magnesium has relatively low mechanical properties due to the low strength of the magnesium matrix,which limits its application.To solve this problem,many studies developed high-performance porous magnesium.

    Previous studies demonstrated that the compressive properties of the porous Mg can be improved by altering its structural parameters,such as the porosity,pore size,and pore shape [2,4,9].Wang et al.[10]revealed that the high compressive properties can be achieved by refining the grain size of the ɑ-Mg.Yang et al.[11]fabricated Mg-Al alloy foams with varied Al additions.They demonstrated that an enough Al addition is necessary for successful foaming.The Al addition has a clear effect on the strength of the Mg-Al alloy foams [11].These studies showed that the optimization of the microstructure of the Mg matrix (e.g.,composition and constituent phase) is also an effective method for improving the compressive properties of the porous Mg.

    Among different methods for optimizing the microstructure,adding rare earth (RE) elements can improve the mechanical properties of the as-cast Mg foams.Li et al.[12]found that the WE43 (Mg-4%Y-3.3%RE) Mg foams have unique biodegradation behavior and limited cytotoxicity,which reveals that the RE elements can provide them appropriate mechanical strength,corrosion resistance,and biocompatibility [12].In our previous study [13],the Gd and Zn elements were used to prepare the porous Mg alloy.The compressive properties of the porous Mg alloy were adjusted by the Gd content due to the presence of the specific second phase.In these porous Mg alloys,the RE elements enhance the mechanical properties by multiple strengthening effects,including grain refinement,precipitation,and solution strengthening.These strengthening effects are similar to that in the bulk Mg alloys.This indicates that the strengthening and toughening methods of porous Mg-RE alloys can be inspired by the high-performance methods of bulk Mg-RE alloys.

    The Mg-Zn-Y alloy is a typical high-performance series,which have attracted extensive attention due to their very good mechanical properties at RT and high temperatures [14–18].In the Mg-Zn-Y alloys,a variety of second phases can be formed,including the Mg-Zn binary phase,Iphase (Mg3Zn6Y),W-phase (Mg3Zn3Y2),and LPSO phase(Mg12ZnY),which depends on the Zn/Y atomic ratio and solidification condition[18].These second phases have different strengthening effects on the Mg alloy [19–23].It is reported that the fine LPSO phase effectively enhances the mechanical properties of the Mg alloy due to its high hardness,thermal stability,and coherence withα-Mg [20,21].The strength of the Mg-3.16Y-1.87Zn(wt%)alloy can be clearly improved by nanoscale lamellar structures [20].The quasicrystal I-phase is formed in Mg-xY-6xZn alloys.When the contents of the Iphase increase,the tensile strength of the alloy increases,the elongation first increases and then decreases [22].The lamellar fine W phase effectively hinders the dislocation movement,and provides the as-cast Mg-Y-Zn alloys a high strength [23].

    It can be deduced from these study mentioned above that the high-performance porous Mg-Y-Zn could be tailored by specific phase composition through the adjustment of the Zn/Y atomic ratio.However,the related studies are few,and therefore a detailed study is required.In this paper,interconnected porous Mg-Zn-Y (i.e.,open-cell Mg-Zn-Y foam) with different phase compositions were designed and prepared by changing the Y element content.The microstructure evolution of the porous Mg-Zn-Y with Y addition was systematically studied by a series of characterization methods.The morphology and fine structure of the I-phase,W-phase,and LPSO phase were studied in detail.The relationship between the microstructure,phase morphology,and compressive properties was discussed.In addition,the impact of the testing temperature on the compressive deformation behavior and energy absorption characteristics of the interconnected porous Mg-Zn-Y was investigated.This study expands an available path for the development of Mg-Y-Zn foams with very high performance.

    2.Materials and methods

    2.1. Specimen preparation

    In this study,the interconnected porous Mg-Zn-Y was prepared by the pressure infiltration process,which can adjust the pore structure of the Mg-Zn-Y foams [4,9].The pressure infiltration process of the porous Mg-Zn-Y is shown in Fig.1.It mainly includes the following steps: (1) The granular calcium chloride particles,having a size in the range of 2-3 mm,were made into a porous CaCl2preform.(2) Pure Mg ingots,having a purity of 99.5%,were melted in a crucible,and Mg-30Y master alloy and Zn particles,having a purity of 99.5%,were added into molten magnesium under the protection of argon gas.The chemical component design of Mg-Zn-Y foams is presented in Table 1.(3)Magnesium alloy melt was infiltrated into the porous CaCl2preform under constant pressure,and the Mg/CaCl2composites were obtained after solidification.(4) The CaCl2particles were removed from the water solution to leave the open-cell Mg-Zn-Y foams with different Y additions.The mean porosities of the porous Mg-Zn-Y alloys used in this study are 67.51±0.02%.

    Fig.1.Schematic diagram of pressure infiltration process.

    Table 1 Chemical component design of porous Mg-Zn-Y alloy.

    2.2. Characterization

    The pore size of porous Mg-Zn-Y was calculated by the Nano Measure digital photography and image analysis software.The microstructures of the porous Mg-Zn-Y were observed using an optical microscope (OM,MDJ-DM320).The second dendrite arm spacing (SDAS) and the volume fraction of the second phase were counted by the OM image software(Nano Measure and Image J).

    The phase compositions of the porous Mg-Zn-Y were detected with X-ray diffraction (XRD,Cu-Kα,D/MAX-2500).The microstructure and phase morphology of the porous Mg-Zn-Y were observed by a scanning electron microscope(SEM,ZEISS EVO-18,TESCAN VEGA3) equipped with an X-ray energy-dispersive spectrum analyzer (EDS,OXFORD Model Link-Isis).The SEM samples were selected from foam struts.These foam struts were ground using many abrasive papers.Afterwards,they were mechanically polished and then etched in a mixed acid solution for approximately 12 s.

    The details of the microstructure and phase structure were further observed by a transmission electron microscope(TEM,JEOL JEM-2100F).The TEM sample was selected from the foam struts.The foam struts were grinded to make thin foils.These foils were pretreated using the argon ion thinning technique for further TEM observation.

    2.3. Compressive test

    The porous Mg-Zn-Y alloys were machined into rectangular specimens having a size of almost 2.2×1.5×1.5 cm for compressive tests.According to the ISO-13314 standard[24],quasi-static compressive tests were performed to study the compressive properties of the Mg-Zn-Y foams using an INSTRON-5869 material testing machine equipped with an elevated temperature chamber with a strain rate of 10-3s-1.Compressive tests were conducted at room temperature (RT),200°C,and 300°C.To maintain the reproducibility and reliability of the results,more than three samples were tested at each temperature.In addition,the statistical results are provided to evaluate the compressive properties of the porous Mg.

    In order to observe the deformation behavior of the porous Mg-Zn-Y,a digital camera was used to capture the images of the compressive process.These images are provided in the supporting information(cf.Figs.S1,S2,and S3).The fracture morphologies of the foam struts were studied by SEM to explore the failure mechanism of the foam strut.

    The compressive properties of the foams were estimated using three parameters: compressive strength (σ?),energy absorption capacity (W),and average energy absorption efficiency ().The compressive strength is determined as the first peak stress when a stress yield occurs beyond the linearelastic region.Wandare computed as [2,4,5,24]:

    whereεis the compressive strain,σmaxis the maximum stress appeared before this strain,andε1is an initial strain on the plateau region of the stress-strain curve.

    3.Results and discussions

    3.1. Macro morphology

    Fig.2 shows the macro morphologies of the porous Mg-Zn-Y alloys.It can be seen that the Mg-Zn-Y foams with different Y contents have the open-cell structure,and adjacent pores are connected by “opening window”.The average pore size of the porous Mg-Zn-Y is 2.81±0.06 mm.

    Fig.2.Macro images and pore size distribution of porous Mg-Zn-Y alloys: (a-c) Mg-2Zn-0.4Y;(d-f) Mg-2Zn-3Y;(g-i) Mg-2Zn-6Y.

    3.2. Microstructure

    Fig.3 shows OM images of the foam struts and the statistical results of the secondary dendrite arm spacing (SDAS).It can be observed from Figs.3(a),(d),and (g) that the microstructures of the porous Mg-Zn-Y alloys are typically dendrite structures.The microstructure of the Mg-2Zn-0.4Y foams mainly containsα-Mg and particle-shape second phase.The microstructure of the Mg-2Zn-3Y foams consists ofα-Mg and a continuous network phase at the grain boundary.As the Y content is 6 wt.%,the lamellar phases are formed at theα-Mg grain boundaries.

    Fig.3.OM images and SDAS of porous Mg-Zn-Y alloys: (a-c) Mg-2Zn-0.4Y;(d-f) Mg-2Zn-3Y;(g-i) Mg-2Zn-6Y.

    In addition,it can be seen from Figs.3(c),(f),and (i)that the average SDASs of the Mg-2Zn-0.4Y,Mg-2Zn-3Y,and Mg-2Zn-6Y foams are 21.51±0.13 μm,17.63±0.11 μm,and 13.22±0.07 μm,respectively.This demonstrates that the addition of Y element refines the microstructure of the Mg-Zn-Y foams.It was demonstrated [25]that during the solidification process,Y atoms accumulate at the front of the solid-liquid interface,which results in continuous undercooling.The formation of tiny particles containing Y elements at the front of the solid-liquid interface will hinder the growth of grains.The Y element has a significant refining effect on the microstructure of the magnesium alloy [26].Moreover,the statistical results show that the volume fractions of the second phase in the Mg-2Zn-0.4Y,Mg-2Zn-3Y,and Mg-2Zn-6Y foams are approximately 3.8%,9.4%,and 21.2%,respectively.This indicates that the addition of Y element promotes the formation of the second phase in the Mg-Zn-Y foams.

    Fig.4 shows the XRD patterns of porous Mg-Zn-Y alloys with different Y contents.The Mg-2Zn-0.4Y foams are composed ofα-Mg,MgZn2phase,and little I-phase (Mg3Zn6Y).The formation of the I-phase is due to the Y segregation in grain boundary under the condition of non-equilibrium solidification [27].The Mg-2Zn-3Y foams mainly consist ofα-Mg and W-phases.In addition,the Mg-2Zn-6Y foams are mainly composed ofα-Mg and LPSO phases.This indicates that different phase compositions of the foams are presented when different Y contents are added in the foam struts.Previous studies [28,29]reported that when the weight ratio of Zn/Y was reduced from 0.72 to 0.36,the main phase compositions were transformed from the W-phase to the LPSO phase on the Mg-Zn-Y alloy [28,29].This study indicates that the precipitation of each constituent phase in the foams is similar to that in the alloys during solidification.

    Fig.4.XRD patterns of porous Mg-Zn-Y alloys.

    Figs.5 and 6 show the SEM and TEM images of porous Mg-2Zn-0.4Y alloys,respectively.It can be seen from Figs.5(a-c) that there are plenty of particle-shaped phases having a size of 3-5 μm in the foams.The EDS-A result in Fig.5(d) shows the existence of Y and Zn elements in the particle phase.The TEM images in Figs.6(a) and (b) show that the particle phase is MgZn2(a=0.522 nm and c=0.857 nm) with a hexagonal structure [30].It can be observed from Fig.6(c) that a small number of eutectic phases and the corresponding selected area electron diffraction (SAED) pattern shown in Fig.6(d) are consistent with the multiple fold symmetry characteristics,which clearly illustrates the icosahedral quasicrystalline structure [22,31].

    Fig.5.Porous Mg-2Zn-0.4Y alloy: SEM images (a-c);(d) EDS analysis result on point A.

    Fig.6.TEM images of second phases in porous Mg-2Zn-0.4Y alloy: (a) MgZn2 phase;(b) SAED pattern of MgZn2 phase;(c) I-phase;(d) SAED pattern of I-phase.

    Fig.7 shows the SEM images of porous Mg-2Zn-3Y alloys.The high-magnification SEM images presented in Figs.7(b) and (c) show the continuous network phase at the grain boundaries.The EDS-B analysis demonstrates that the Zn/Y atomic ratio of the continuous network phase is 1.6,which is close to the theoretical ratio of the W-phase (1.5).Figs.8(a) and (b) show the TEM images of the W-phase and its corresponding SAED pattern.These results confirm that the W-phase has an fcc structure with lattice constant(a) of 0.6848 nm [32].The W-phase is in the form of long needle and skeletal shape.The orientation between the Wphase and theα-Mg can be expressed as [001]W//[010]α,(110)W//(0001)α,which is consistent with the result of the study presented in [33].

    Fig.7.Porous Mg-2Zn-3Y alloy: (a-c) SEM images;(d) EDS analysis result on point B.

    Fig.8.TEM images of second phases in porous Mg-2Zn-3Y alloy: (a) Wphase;(b) SAED pattern of W-phase.

    Fig.9 shows the SEM images of porous Mg-2Zn-6Y alloys.The gray lamellar phases having a size in the range of 10-20 μm are formed at grain boundaries,as shown in Figs.9(b) and (c).The EDS-C analysis on the gray lamellar phase indicates that the Zn/Y atomic ratio is 0.86,which is close to the theoretical ratio of the LPSO phase (Zn/Y atomic ratio is 1.0).

    Fig.10 shows the TEM image of the lamellar LPSO phase in porous Mg-2Zn-6Y alloy.The corresponding SAED pattern for the zone axis [110]indicates the existence of the LPSO phase.Fig.10(c) shows that the distance between two adjacent weaker spots of the LPSO phase is 1/18 of the distance between the (0000) and (0002) spots of theα-Mg matrix.This denotes the 18R-type LPSO phase.Fig.10(d) shows a high-resolution TEM image of the 18R-LPSO phase along the [110]LPSOdirection.It can be seen that the LPSO structure consists of 18 stacking sequences of ABABABCACACABCBCBC.The lattice constants are estimated as a=0.320 nm and c=4.68 nm for the hexagonal structure [17,34].The LPSO phase is fully coherent with the 2H-typeα-Mg matrix along with the [0001]direction.It has a crystallographic relationship of [110]LPSO//[110]α-Mg,(0001)LPSO//(0001)α-Mgwith theα-Mg matrix.

    Fig.10.TEM images of second phases in porous Mg-2Zn-6Y alloy: (a)LPSO phase;(b)SAED pattern of LPSO phase;(c)enlargement of the framed area in (b);(d) high-resolution image of LPSO phase.

    3.3. Compressive curves

    Fig.11 shows the compressive stress-strain curves of the porous Mg-Zn-Y alloys at different temperatures.All the stress-strain curves have three distinct regions,as mentioned in the studies presented in [3,35]: an initial linear elastic stage,then a wide plateau stage,and a densification stage.The amplitude of the stress fluctuation clearly decreases as the temperature increases from RT to 300°C.It is reported that the stress fluctuation in the plateau stage is caused by the sudden brittle fracture of the foam struts [36,37].Figs.S1,S2,and S3 in the Supporting documents show the different macroscopic deformation behaviors of the porous Mg at different temperatures.It can be observed that the main failure modes are changing from sudden brittle fracture at RT to bending/buckling at high temperature.These results explain the phenomenon of stress fluctuations decrease with the temperature increase.

    Fig.11.Stress-strain curves of porous Mg-Zn-Y alloys at different temperatures: (a) at RT;(b) at 200°C;(c) at 300°C.

    The compressive strengths of porous Mg-Zn-Y alloys are summarized in Table 2.It can be seen that,when the Y content increases from 0.4 wt.% to 6 wt.% at RT,the compressive strength of the Mg-Zn-Y foams increases from 6.30 MPa to 9.23 MPa.Some studies on the mechanical properties of open-cell Mg foam with porosity ranging from 63% to 68%exist.The compressive strength of the pure Mg foam with 67% porosity is 2.5 MPa [38].The WE43 foams with 64%porosity have a compressive strength of 27.5 MPa[12].When the porosity is 65%,the strength of the AZ31 foam is about 6.25 MPa [4].The Ni/Mg foams with 65% porosity have a compressive strength of 5.01 MPa [39].

    Table 2 Compressive strengths at different temperatures.

    It can also be deduced from Table 2 that the compressive strength increases with the increase of the Y content at each testing temperature.This is mainly attributed to three aspects: the volume fraction of the second phase (the MgZn2phase,I-phase,W-phase,and LPSO phase),the thermal stability of the second phase,and the morphology of the second phase.The increasing volume fraction of the second phase (Fig.3) is a main factor.More precisely,at room temperature,dislocation slip is the main deformation mechanism,and these second phases considered as strengthening phases can hinder the dislocation slip.During the solidification process,the increasing precipitated phases can hinder the growth of theα-Mg grains,playing a crucial role in grain refinement strengthening.The grain boundary slip(GBS) is a type of plastic deformation of the magnesium alloys [40].At high-temperature (e.g.,300°C),the occurrence of GBS often significantly reduces the magnesium strength.The LPSO phase,W-phase,and I-phase are high-temperature stable phases [18]distributed at grain boundaries (Figs.5,7,and 9).They can stabilize the grain boundaries and hinder their slip,which inhibits the magnesium softening.In addition,the thermal stability of the second phase is a subordinate factor.The melting points of the LPSO phase,Wphase,I-phase,and MgZn2phase in the Mg-Zn-Y alloy are approximately 561,540,419,and 381°C,respectively [18].The thermal stability of those phases follows the following order: LPSO phase>W-phase>I-phase>MgZn2phase.The different phases have different hindering effects on the dislocation slip or/and GBS.When the Y content increases,the volume fraction of the thermally stable phases increases,which enhances the hindrance effect on the GBS.Moreover,the morphology of the second phase is an underlying factor.According to the previous study presented in [22],the lamellar structure of the W phase with small diameter effectively hinders the dislocation movement,which provides a better strengthening effect compared with the block LPSO phase with large diameter.This indicates that the strengthening effect of the second phases is also affected by their morphologies,such as the average diameter and aspect ratio in the Mg-Zn-Y alloy.In this study,there are different morphologies of the precipitated phases with different components.Figs.5 and 6 show that the MgZn2phase is a small particle shape with a hexagonal structure,and the I-phase is along theα-Mg matrix with lamellar eutectic structure.Figs.7 and 8 show that the W-phase is a long needle and skeletal shape with an fcc structure.Figs.9 and 10 show that the LPSO phase is a fine lamellar shape with hexagonal structure.In terms of the morphology of the second phase,the granular shape of the second phase has a better strengthening effect compared with the other shape of the second phase.However,in this study,the strengthening effect is weakened by the low volume fraction.

    It can also be seen from Table 2 that the compressive strength decreases with the increase of the testing temperature when the Y element is uniform content.This is mainly due to different deformation mechanisms at different temperatures.When the temperature increases from RT to higher values,the dominant deformation mechanism gradually shifts from dislocation slip to dislocation climb,and then to GBS[41].The gradual enhancement of these softening mechanisms leads to the decrease of the strength and the increase of the plasticity of the foam strut when the temperature increases.As a result,the critical shear stress decreases at high temperatures,which softens the magnesium matrix,leading to the decrease of the strength but the increase of the plasticity.

    3.4. Failure characteristic

    The macro deformation behavior of the porous Mg alloy at a temperature ranging between RT and 300°C includes the formation of the local deformation band and the expansion of the deformation band,while each contains several pores and foam struts,as shown in Figs.S1,S2,and S3.This local deformation band during compressive deformation was also reported in the study presented in [42].

    Fig.12 shows the fracture morphologies of foam struts at RT with a strain of 30%.There are different fracture characteristics in the Mg-Zn-Y foams with different Y contents.Fig.12(c) shows that the fracture surface of Mg-2Zn-0.4Y foams is composed of small dimples,tearing edges,and cleavage steps,which indicates the mixed fracture characteristics.Fig.12(f) shows many cleavage facets,cleavage steps,and a small amount of tearing edges in the fracture surface of the Mg-2Zn-3Y foams,which also indicates the mixed fracture characteristics.Fig.12(i) shows most of the cleavage facets in the fracture surface of the Mg-2Zn-6Y foams,which indicates cleavage fracture characteristics.There are complex factors responsible for the brittleness of the foam strut,including the SDAS,morphology of the second phase,volume fraction of the second phase,and the interface coherent.The large SDAS and coarse second phase first weaken the plasticity of the foam struts.The coarse second phase with a high volume fraction at the grain boundary then aggravates the brittleness of the foam struts.Finally,the interface coherence varies with the phase compositions.The coherent interface between the LPSO phase and theα-Mg matrix is in favor of the coordination ability [19,20].The previous study presented in [43]demonstrated that the semi-coherent interface between the I phase and theα-Mg matrix brings a high interface bonding [43].The semi/in-coherent interface between the W-phase andα-Mg matrix leads to a low bonding strength [44].

    Fig.12.Fracture morphologies of foam struts at RT: (a-c) Mg-2Zn-0.4Y foams;(d-f) Mg-2Zn-3Y foams;(g-i) Mg-2Zn-6Y foams.

    Fig.13 shows the fracture morphologies of the foam struts at 200°C.It can be seen from Figs.13(b),(e),and (h) that the fracture characteristics of the three foams are similar.It can be observed from Figs.13(c),(f),and(i)that dimples and tearing edges exist in the fracture surfaces of the three foams,which indicates the mixed fracture characteristics at 200°C.This is due to the fact that when the temperature increases to 200°C,the critical shear stress of the slip system decreases but the number of slip systems increases,which increases the plasticity of the foam struts.

    Fig.13.Fracture morphologies of foam struts at 200°C: (a-c) Mg-2Zn-0.4Y foams;(d-f) Mg-2Zn-3Y foams;(g-i) Mg-2Zn-6Y foams.

    Fig.14 shows the fracture morphologies of the foam struts at 300°C.It can be observed from Figs.14(a),(d),and (g)that cracks or tears occur at a large deformation strain.However,the complete fracture of the foam struts is less,which results in their higher plasticity at 300°C compared with that at RT.It can be seen from Figs.14(b),(e),and (h) that the fracture characteristics of the three foams are very similar.Dimples and loose oxides are clear in the fracture surface of the three foams,as shown in Figs.14(c),(f),and (i).The results show that the plasticity of the foam strut increases with the increase of the testing temperature,which is consistent with the mechanical response in the stress-strain curve at 300°C.

    Fig.14.Fracture morphologies of foam struts at 300°C: (a-c) Mg-2Zn-0.4Y foams;(d-f) Mg-2Zn-3Y foams;(g-i) Mg-2Zn-6Y foams.

    Fig.15.Energy absorption curves and energy absorption efficiency curves of porous Mg-Zn-Y alloys at different temperatures: (a-b) at RT;(c-d) at 200°C;(e-f) at 300°C.

    These results demonstrate that when the temperature increases,different softening mechanisms lead to the increase of the plasticity of the foam strut.This can explain the decrease of the stress fluctuations with the increase of the temperature in the compressive curves.

    3.5. Energy absorption characteristics

    It can be deduced from the deformation behavior and fracture morphologies of the foam struts that the Mg-Zn-Y foam can dissipate deformation energy by the bending/buckling of the foam strut,the fracture of the foam strut,and the friction between the struts during the compressive deformation.Table 3 presents the energy absorption values of porous Mg-Zn-Y alloys with different Y contents at RT,200°C,and 300°C.Figs.15(a),(c),and (e) show the energy absorption curves of the foams.It can be concluded that the energy absorption capacity decreases with the temperature increase.In addition,at the same testing temperature,the energy absorption capacity increases with the increase of the Y content.Figs.15(b),(d),and (f) show the energy absorption efficiency curves of the foams with different Y contents at RT,200°C,and 300°C.All the curves of the foams have the same trend.The average energy absorption efficiency of the Mg-Zn-Y foam is independent of the Y content.A previous study [45]demonstrated that the energy absorption efficiency of metallic foams does not rely on the relative density,but it is mainly affected by the pore structure.This indicates that the energy absorption capacities of the foams at different temperatures can be improved by the Y content without sacrificing the average energy absorption efficiency.

    Table 3 Energy absorption capacities and efficiencies at different temperatures.

    4.Conclusion

    In this paper,the microstructure evolution,compressive properties,and energy absorption characteristics of porous Mg-Zn-Y alloys with different phase compositions were studied.The following conclusions can be drawn:

    1.When the Y content increases,the SDAS of the porous Mg-Zn-Y alloy decreases,but the volume fraction of the second phase increases.The second phases of the Mg-2Zn-0.4Y foams are mainly the MgZn2phase and a small amount of I-phase.The Mg-2Zn-3Y foams are mainly composed ofα-Mg and W-phase.The Mg-2Zn-6Y mainly consists of theα-Mg and the 18R-LPSO phase at grain boundaries.

    2.The compressive strength and energy absorption capacity of the porous Mg-Zn-Y alloy depend on the Y content and testing temperature.The Mg-2Zn-6Y foams obtain the highest compressive strength and energy absorption capacity among the experimental foams at all the temperatures due to the high volume fraction of the second phase.However,the average energy absorption efficiency does not depend on the Y content.

    3.The foam struts are mainly brittle and fractured at RT.When the temperature increases,the brittleness of the foam struts decreases,causing more bending/buckling and less fracture.As a result,the amplitude of the stress fluctuation in the compressive stress-strain curve clearly decreases with the temperature increase from RT to 300°C.

    These results confirm that the Y elements can effectively improve the microstructures and compressive properties of the porous Mg-Zn-Y alloys at different temperatures.In addition,the energy absorption capacities of the foams can be enhanced without sacrificing the average energy absorption efficiency.

    Data availability

    The raw/processed data required to reproduce these findings cannot be shared at this time due to time limitations.

    Declaration of Competing Interest

    The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

    CRediT authorship contribution statement

    J.A.Liu:Conceptualization,Writing– original draft.S.J.Liu:Writing– review &editing,Data curation.B.Wang:Conceptualization,Methodology.W.B.Sun:Conceptualization,Methodology.X.J.Liu:Validation,Writing– review &editing.Z.W.Han:Supervision,Resources.

    Acknowledgments

    This work was supported by “The National Key Research and Development Program of China (No.2018YFA0703300)”,“Science and Technology Project of Education Department of Jilin Province (No.JJKH20231086KJ)”,Development Project of Jilin Province(No.2021C038-4).

    Supplementary materials

    Supplementary material associated with this article can be found,in the online version,at doi:10.1016/j.jma.2023.06.014.

    99热全是精品| 女人高潮潮喷娇喘18禁视频| 国产成人系列免费观看| 你懂的网址亚洲精品在线观看| 久久精品久久久久久噜噜老黄| 亚洲综合色网址| 一二三四中文在线观看免费高清| 免费黄色在线免费观看| 国产免费又黄又爽又色| 免费高清在线观看日韩| av片东京热男人的天堂| 亚洲精品国产av成人精品| 嫩草影视91久久| 熟女av电影| 亚洲第一区二区三区不卡| 别揉我奶头~嗯~啊~动态视频 | 在线观看免费日韩欧美大片| 久久人人爽av亚洲精品天堂| 国产一级毛片在线| av有码第一页| 日韩一卡2卡3卡4卡2021年| 欧美日韩视频高清一区二区三区二| 9热在线视频观看99| 在线观看一区二区三区激情| 免费女性裸体啪啪无遮挡网站| 99热国产这里只有精品6| 9色porny在线观看| 亚洲欧美激情在线| 亚洲久久久国产精品| 18在线观看网站| 中文字幕色久视频| 在线 av 中文字幕| 在线观看免费视频网站a站| 免费观看人在逋| 中国三级夫妇交换| 2021少妇久久久久久久久久久| 黑人巨大精品欧美一区二区蜜桃| 女人久久www免费人成看片| 18在线观看网站| 欧美少妇被猛烈插入视频| 亚洲四区av| 亚洲国产精品国产精品| 丝袜美腿诱惑在线| 午夜激情久久久久久久| 久热爱精品视频在线9| 精品国产一区二区三区四区第35| 永久免费av网站大全| 成人国产av品久久久| 午夜福利乱码中文字幕| 国产伦人伦偷精品视频| 一本色道久久久久久精品综合| 热re99久久国产66热| 精品少妇内射三级| 亚洲欧美清纯卡通| 亚洲国产av新网站| 19禁男女啪啪无遮挡网站| 99re6热这里在线精品视频| 午夜福利,免费看| 亚洲欧美成人精品一区二区| 亚洲精品美女久久久久99蜜臀 | 大香蕉久久网| 精品人妻熟女毛片av久久网站| 99re6热这里在线精品视频| 亚洲成色77777| 欧美日韩亚洲综合一区二区三区_| 精品国产一区二区三区久久久樱花| av.在线天堂| 亚洲激情五月婷婷啪啪| 电影成人av| 爱豆传媒免费全集在线观看| 一边摸一边抽搐一进一出视频| 欧美精品高潮呻吟av久久| 亚洲欧美精品自产自拍| 又粗又硬又长又爽又黄的视频| 午夜福利影视在线免费观看| 日韩视频在线欧美| 久久久久久久久久久久大奶| 日韩av免费高清视频| 老司机影院成人| 国产日韩欧美在线精品| 视频在线观看一区二区三区| 国产精品欧美亚洲77777| 美女国产高潮福利片在线看| 男人添女人高潮全过程视频| 亚洲精品自拍成人| 日本猛色少妇xxxxx猛交久久| 777久久人妻少妇嫩草av网站| 一级黄片播放器| 性色av一级| 免费在线观看完整版高清| 最新的欧美精品一区二区| 男女国产视频网站| 在线观看www视频免费| 欧美激情 高清一区二区三区| 免费人妻精品一区二区三区视频| 人人妻人人添人人爽欧美一区卜| 晚上一个人看的免费电影| 黄片小视频在线播放| 一级,二级,三级黄色视频| 美女扒开内裤让男人捅视频| 亚洲欧美中文字幕日韩二区| 人妻一区二区av| 波多野结衣一区麻豆| 久久青草综合色| 亚洲国产欧美日韩在线播放| 久久久国产精品麻豆| 亚洲欧美成人综合另类久久久| 大片免费播放器 马上看| 久久久久久人妻| 80岁老熟妇乱子伦牲交| 久久久久国产精品人妻一区二区| 午夜福利免费观看在线| 亚洲欧美成人精品一区二区| 亚洲七黄色美女视频| 亚洲av男天堂| 在线观看免费高清a一片| 黑人猛操日本美女一级片| 欧美日韩成人在线一区二区| 99香蕉大伊视频| 电影成人av| bbb黄色大片| 国产精品三级大全| 中国三级夫妇交换| av天堂久久9| 少妇猛男粗大的猛烈进出视频| 在线 av 中文字幕| 夜夜骑夜夜射夜夜干| 最近手机中文字幕大全| 久久人人爽av亚洲精品天堂| 一边亲一边摸免费视频| av又黄又爽大尺度在线免费看| 777米奇影视久久| 久久久久久久久免费视频了| 日本欧美国产在线视频| 狂野欧美激情性bbbbbb| 一级黄片播放器| 久久久久久久大尺度免费视频| 伊人久久大香线蕉亚洲五| 考比视频在线观看| av有码第一页| 亚洲第一区二区三区不卡| 黄色视频不卡| 亚洲精品,欧美精品| 一级片'在线观看视频| 王馨瑶露胸无遮挡在线观看| 蜜桃国产av成人99| 18禁国产床啪视频网站| 国产福利在线免费观看视频| 少妇人妻久久综合中文| 黄色怎么调成土黄色| 久热爱精品视频在线9| 日韩视频在线欧美| 一级毛片黄色毛片免费观看视频| 精品国产乱码久久久久久小说| 桃花免费在线播放| 伦理电影免费视频| 成年人午夜在线观看视频| 久久久精品免费免费高清| 国产极品天堂在线| 最近中文字幕高清免费大全6| 亚洲专区中文字幕在线 | 高清不卡的av网站| 丁香六月天网| 国产精品国产三级专区第一集| 人人妻人人添人人爽欧美一区卜| 久久国产精品男人的天堂亚洲| 一级片免费观看大全| 成人三级做爰电影| 久久久久久人人人人人| 51午夜福利影视在线观看| 午夜久久久在线观看| 国产精品一二三区在线看| 波野结衣二区三区在线| 亚洲欧洲精品一区二区精品久久久 | 女人高潮潮喷娇喘18禁视频| 成人手机av| 久久韩国三级中文字幕| 欧美黑人精品巨大| 99香蕉大伊视频| 午夜福利影视在线免费观看| 欧美人与善性xxx| 亚洲免费av在线视频| 曰老女人黄片| 国产免费现黄频在线看| 亚洲av电影在线观看一区二区三区| 飞空精品影院首页| 母亲3免费完整高清在线观看| 精品第一国产精品| 一级爰片在线观看| 别揉我奶头~嗯~啊~动态视频 | 亚洲国产最新在线播放| 欧美激情 高清一区二区三区| 亚洲国产av影院在线观看| 一边摸一边抽搐一进一出视频| 国产一区二区三区综合在线观看| 亚洲国产中文字幕在线视频| 亚洲图色成人| 这个男人来自地球电影免费观看 | 国产成人精品无人区| 国产高清国产精品国产三级| 午夜精品国产一区二区电影| 亚洲一区二区三区欧美精品| 欧美日韩国产mv在线观看视频| 日韩电影二区| 免费不卡黄色视频| 亚洲精品国产区一区二| 美女脱内裤让男人舔精品视频| 免费久久久久久久精品成人欧美视频| 亚洲精品国产区一区二| 日韩av在线免费看完整版不卡| 大片免费播放器 马上看| 一本大道久久a久久精品| xxxhd国产人妻xxx| 国产又爽黄色视频| 国产国语露脸激情在线看| 在线 av 中文字幕| 色网站视频免费| 国产亚洲最大av| 黑人巨大精品欧美一区二区蜜桃| 久久性视频一级片| www日本在线高清视频| 国产毛片在线视频| 免费不卡黄色视频| 国产精品久久久久久精品古装| 国产成人精品久久久久久| 久久99热这里只频精品6学生| 天天躁狠狠躁夜夜躁狠狠躁| a级毛片在线看网站| 一区二区三区四区激情视频| 丁香六月天网| 亚洲av成人精品一二三区| 老司机影院成人| 大香蕉久久网| 我的亚洲天堂| 80岁老熟妇乱子伦牲交| 自拍欧美九色日韩亚洲蝌蚪91| 另类精品久久| 18在线观看网站| 我要看黄色一级片免费的| 亚洲精华国产精华液的使用体验| 精品久久蜜臀av无| 老汉色∧v一级毛片| 欧美在线一区亚洲| 精品国产国语对白av| 免费看不卡的av| 日本vs欧美在线观看视频| 免费在线观看视频国产中文字幕亚洲 | 超碰成人久久| 午夜福利乱码中文字幕| 国产黄色免费在线视频| 桃花免费在线播放| 在线观看免费高清a一片| 在线观看人妻少妇| av在线观看视频网站免费| av卡一久久| 亚洲综合精品二区| 欧美 亚洲 国产 日韩一| 国语对白做爰xxxⅹ性视频网站| 狠狠精品人妻久久久久久综合| 精品一品国产午夜福利视频| 99精国产麻豆久久婷婷| 国产极品天堂在线| 精品国产乱码久久久久久小说| 精品久久久久久电影网| 亚洲国产欧美在线一区| 国产男女内射视频| 9热在线视频观看99| 久久久久久久国产电影| 国产精品国产av在线观看| 亚洲人成77777在线视频| 99香蕉大伊视频| 亚洲成国产人片在线观看| 欧美少妇被猛烈插入视频| 亚洲四区av| 国产日韩欧美在线精品| 高清黄色对白视频在线免费看| 少妇被粗大猛烈的视频| 久久久久久久久久久久大奶| 久久人人爽av亚洲精品天堂| 午夜福利视频精品| 精品国产超薄肉色丝袜足j| 一本一本久久a久久精品综合妖精| 视频在线观看一区二区三区| 久久 成人 亚洲| 热99国产精品久久久久久7| 国产片特级美女逼逼视频| 免费黄频网站在线观看国产| 欧美日韩综合久久久久久| 免费高清在线观看视频在线观看| xxxhd国产人妻xxx| 亚洲精品日本国产第一区| 欧美人与善性xxx| 久久久国产精品麻豆| 日韩不卡一区二区三区视频在线| 国产免费视频播放在线视频| 久久人人爽人人片av| 黑人巨大精品欧美一区二区蜜桃| 国产av一区二区精品久久| 免费在线观看完整版高清| 国产成人精品福利久久| 亚洲欧美成人综合另类久久久| 久久影院123| 建设人人有责人人尽责人人享有的| 在线精品无人区一区二区三| 99精品久久久久人妻精品| 国产成人免费无遮挡视频| 久久久久久久大尺度免费视频| 捣出白浆h1v1| 日韩制服骚丝袜av| 国产精品嫩草影院av在线观看| 亚洲国产毛片av蜜桃av| 制服丝袜香蕉在线| 亚洲综合色网址| 99热全是精品| 国产在线免费精品| 在线观看免费日韩欧美大片| 高清不卡的av网站| 日日啪夜夜爽| 精品国产露脸久久av麻豆| 夫妻午夜视频| 老汉色∧v一级毛片| 午夜福利免费观看在线| 一级毛片电影观看| 久久久精品免费免费高清| 爱豆传媒免费全集在线观看| 97在线人人人人妻| 精品一区二区免费观看| 亚洲图色成人| 欧美日韩视频精品一区| 亚洲av综合色区一区| 一级,二级,三级黄色视频| 老司机亚洲免费影院| 90打野战视频偷拍视频| 久久99热这里只频精品6学生| 亚洲视频免费观看视频| 国产视频首页在线观看| 欧美激情 高清一区二区三区| 男女高潮啪啪啪动态图| 精品亚洲成国产av| 国产成人精品无人区| 久久久国产一区二区| 国产成人91sexporn| 男的添女的下面高潮视频| 国产免费一区二区三区四区乱码| 国产精品二区激情视频| 99热网站在线观看| 国产亚洲一区二区精品| 国产成人精品久久二区二区91 | 一区二区三区乱码不卡18| 少妇人妻 视频| 五月天丁香电影| 久久天堂一区二区三区四区| 十分钟在线观看高清视频www| 女人被躁到高潮嗷嗷叫费观| 汤姆久久久久久久影院中文字幕| 丝袜脚勾引网站| 色网站视频免费| 日本av手机在线免费观看| 日韩欧美一区视频在线观看| 国产麻豆69| 一边摸一边做爽爽视频免费| 美女高潮到喷水免费观看| 亚洲综合色网址| 国产精品蜜桃在线观看| 日本黄色日本黄色录像| 国产精品人妻久久久影院| 欧美成人精品欧美一级黄| 免费观看人在逋| 国产精品 欧美亚洲| 热re99久久精品国产66热6| 99国产精品免费福利视频| 国产麻豆69| 99久国产av精品国产电影| 欧美黄色片欧美黄色片| 91aial.com中文字幕在线观看| 久久精品国产综合久久久| 精品一品国产午夜福利视频| 亚洲av中文av极速乱| 国产av国产精品国产| 91成人精品电影| 丝袜人妻中文字幕| 丝袜美足系列| 日本91视频免费播放| 日韩人妻精品一区2区三区| 毛片一级片免费看久久久久| 亚洲国产日韩一区二区| 亚洲国产欧美网| 99国产综合亚洲精品| av国产久精品久网站免费入址| 亚洲av电影在线进入| 天天躁日日躁夜夜躁夜夜| 免费观看av网站的网址| a级毛片黄视频| 天天躁夜夜躁狠狠久久av| 黄色视频在线播放观看不卡| 老鸭窝网址在线观看| 水蜜桃什么品种好| 久久精品亚洲av国产电影网| 老司机靠b影院| 又大又黄又爽视频免费| 丝袜喷水一区| 高清av免费在线| 成年动漫av网址| 伦理电影免费视频| 久久久久精品人妻al黑| 99久久99久久久精品蜜桃| 香蕉丝袜av| 中文字幕精品免费在线观看视频| 永久免费av网站大全| 一二三四在线观看免费中文在| 最新的欧美精品一区二区| 在线观看www视频免费| 观看av在线不卡| 韩国精品一区二区三区| 最近最新中文字幕免费大全7| av在线老鸭窝| 午夜久久久在线观看| 国产一卡二卡三卡精品 | 欧美成人精品欧美一级黄| 亚洲激情五月婷婷啪啪| 久久久久久久久免费视频了| 黄片播放在线免费| 亚洲国产毛片av蜜桃av| 日本vs欧美在线观看视频| 国产在线一区二区三区精| 中文欧美无线码| 丰满饥渴人妻一区二区三| 亚洲一区二区三区欧美精品| 一级a爱视频在线免费观看| 男女之事视频高清在线观看 | 亚洲国产av新网站| 亚洲国产欧美日韩在线播放| 免费人妻精品一区二区三区视频| 亚洲欧美日韩另类电影网站| 制服丝袜香蕉在线| 中文字幕精品免费在线观看视频| 丝袜美腿诱惑在线| 亚洲精品久久午夜乱码| 欧美黑人欧美精品刺激| 制服人妻中文乱码| 久久毛片免费看一区二区三区| av一本久久久久| 高清在线视频一区二区三区| 精品一区二区三区四区五区乱码 | 国产亚洲av高清不卡| 国产福利在线免费观看视频| 欧美人与性动交α欧美软件| 在线天堂最新版资源| 亚洲欧美一区二区三区久久| 国产成人精品福利久久| 久久久久久久精品精品| 老司机亚洲免费影院| 欧美变态另类bdsm刘玥| 一级毛片 在线播放| 如何舔出高潮| 色精品久久人妻99蜜桃| 最近手机中文字幕大全| 久久久久久久久久久免费av| 精品第一国产精品| 人妻 亚洲 视频| 国产成人欧美在线观看 | 99热全是精品| 日韩精品有码人妻一区| 美女午夜性视频免费| 久久影院123| 女人久久www免费人成看片| 欧美人与性动交α欧美软件| 日韩大码丰满熟妇| 国产欧美日韩一区二区三区在线| 日韩大片免费观看网站| 国产不卡av网站在线观看| 高清不卡的av网站| 亚洲av日韩在线播放| 亚洲精品第二区| 少妇被粗大猛烈的视频| 国产免费又黄又爽又色| 精品一区二区三区av网在线观看 | 久久久久久久久免费视频了| 天天添夜夜摸| 最近2019中文字幕mv第一页| 精品国产乱码久久久久久小说| 欧美av亚洲av综合av国产av | 国产精品一区二区在线观看99| 女性被躁到高潮视频| 最新的欧美精品一区二区| 天天躁夜夜躁狠狠躁躁| 国产成人欧美在线观看 | 午夜av观看不卡| 女人高潮潮喷娇喘18禁视频| 久久久精品94久久精品| 国产欧美亚洲国产| 老司机影院成人| 黄片无遮挡物在线观看| 一个人免费看片子| 久久热在线av| 国产男女超爽视频在线观看| 亚洲精品日本国产第一区| 国产精品无大码| 国产野战对白在线观看| 亚洲av电影在线观看一区二区三区| 久久精品人人爽人人爽视色| 美女国产高潮福利片在线看| 国产熟女午夜一区二区三区| av在线老鸭窝| 国产精品一区二区在线不卡| 国产高清不卡午夜福利| 国产精品免费视频内射| 操出白浆在线播放| 日韩视频在线欧美| 国产99久久九九免费精品| 女人久久www免费人成看片| 一区福利在线观看| 久久99热这里只频精品6学生| 中文字幕人妻丝袜制服| 侵犯人妻中文字幕一二三四区| 别揉我奶头~嗯~啊~动态视频 | av在线app专区| 亚洲国产中文字幕在线视频| 国产在线免费精品| 丝袜脚勾引网站| 一区在线观看完整版| 女的被弄到高潮叫床怎么办| 婷婷色综合大香蕉| 国产野战对白在线观看| 亚洲综合色网址| 欧美97在线视频| 啦啦啦在线观看免费高清www| 亚洲精品一二三| 亚洲国产最新在线播放| 免费高清在线观看视频在线观看| 国产亚洲精品第一综合不卡| 国产一区二区 视频在线| 丝袜美腿诱惑在线| 久久精品久久久久久久性| 色婷婷av一区二区三区视频| 久久毛片免费看一区二区三区| 亚洲国产欧美网| 这个男人来自地球电影免费观看 | av一本久久久久| 亚洲人成77777在线视频| 亚洲欧美日韩另类电影网站| av片东京热男人的天堂| 国产不卡av网站在线观看| 一级毛片我不卡| 又大又爽又粗| 国产乱人偷精品视频| 激情五月婷婷亚洲| 精品国产一区二区三区久久久樱花| 麻豆乱淫一区二区| 十分钟在线观看高清视频www| 国产毛片在线视频| 热99国产精品久久久久久7| av免费观看日本| 成年动漫av网址| 国产成人a∨麻豆精品| 欧美精品人与动牲交sv欧美| 久久久久久久国产电影| 丰满乱子伦码专区| 人体艺术视频欧美日本| 另类精品久久| 精品午夜福利在线看| 人妻一区二区av| 老司机亚洲免费影院| 操出白浆在线播放| 午夜免费男女啪啪视频观看| av国产久精品久网站免费入址| 免费高清在线观看视频在线观看| 亚洲少妇的诱惑av| 亚洲av电影在线观看一区二区三区| 90打野战视频偷拍视频| 97人妻天天添夜夜摸| 成人国产麻豆网| 国产一卡二卡三卡精品 | 九草在线视频观看| 五月天丁香电影| 哪个播放器可以免费观看大片| 国产一区有黄有色的免费视频| 久久精品久久精品一区二区三区| 午夜福利网站1000一区二区三区| 久久久久久人人人人人| 中文精品一卡2卡3卡4更新| 欧美人与善性xxx| www日本在线高清视频| bbb黄色大片| 亚洲欧美成人精品一区二区| 2021少妇久久久久久久久久久| 在线观看免费午夜福利视频| 一区二区日韩欧美中文字幕| 日韩欧美精品免费久久| 成人黄色视频免费在线看| 午夜免费观看性视频| 亚洲国产欧美网| 黄片无遮挡物在线观看| 久久婷婷青草| 天天躁日日躁夜夜躁夜夜| 男人操女人黄网站| 人妻 亚洲 视频| 亚洲欧美清纯卡通| 看非洲黑人一级黄片| 蜜桃在线观看..| 无限看片的www在线观看| 交换朋友夫妻互换小说| 久久人人爽人人片av| 免费观看a级毛片全部| 精品国产一区二区久久| 在线观看人妻少妇| 中国国产av一级| 成年人免费黄色播放视频| 丰满少妇做爰视频| 亚洲一码二码三码区别大吗| 亚洲欧美日韩另类电影网站| 人人妻人人澡人人看| 巨乳人妻的诱惑在线观看| 天堂8中文在线网| 国产免费福利视频在线观看|