• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Fault diagnosis of rolling bearings with noise signal based on modified kernel principal component analysis and DC-ResNet

    2023-12-01 10:46:42YunjiZhaoMenglinZhouXiaozhuoXuNannanZhang

    Yunji Zhao | Menglin Zhou| Xiaozhuo Xu | Nannan Zhang

    1School of Electrical Engineering and Automation,Henan Polytechnic University,Jiaozuo,China

    2Henan Key Laboratory of Intelligent Detection and Control of Coal Mine Equipment,Henan Polytechnic University,Jiaozuo, China

    Abstract In view of the influence of aliasing noise on the effectiveness and accuracy of bearing fault diagnosis,a bearing fault diagnosis algorithm based on the spatial decoupling method of modified kernel principal component analysis (MKPCA) and the residual network with deformable convolution (DC-ResNet) is innovatively proposed.Firstly, the Gaussian noise with different signal-to-noise ratios (SNRs) is added to the data to simulate the different degrees of noise in the actual data acquisition process.The MKPCA is used to project the fault signal with different SNRs in the kernel space to reduce the data dimension and eliminate some noise effects.Finally, the DC-ResNet model is used to further filter the noise effects and fully extract the fault features through the training of the preprocessed data.The proposed algorithm is tested on the Case Western Reserve University(CWRU)and Xi'an Jiaotong University and Changxing Sumyoung Technology Co., Ltd.(XJTU-SY) bearing data sets with different SNR noise.The fault diagnosis accuracy can reach 100%within 30 min,which has better performance than most of the existing methods.The experimental results show that the algorithm has an excellent effect on accuracy and computation complexity under different noise levels.

    K E Y W O R D S artificial intelligence, classification, deep learning, fault feature extraction

    1 | INTRODUCTION

    ‘Made in China 2025’ proposed the comprehensive implementation of an innovation-driven development strategy, and took intelligent manufacturing as the main direction,focussing on key areas, such as intelligent terminals and high-end equipment.Rotating machinery as an important device in the industrial production process is of great significance to the development of intelligent manufacturing.

    As the core component of rotating machinery, rolling bearing plays an important role in the safe operation of rotating equipment.Rolling bearing is prone to damage and failure due to its structure and characteristics.According to statistics,30%of mechanical equipment failures caused by vibration are caused by bearing failure [1].According to the fault data to grasp the working condition of rolling bearings,timely fault analysis and diagnosis will avoid the industrial production process caused by the failure of rolling bearings, improve the safety of the production environment and reduce economic losses.Therefore,it is necessary to correctly analyse the collected vibration data that may contain noise and other irrelevant factors.The existing bearing fault diagnosis technology is almost based on datadriven methods.According to the difference of diagnosis technology,the bearing fault diagnosis algorithm can be divided into bearing fault diagnosis technology based on pattern recognition[2–5]and deep learning methods[6,7].

    Bearing fault diagnosis technology based on pattern recognition includes support vector machine(SVM)[8,9],K-nearest neighbour[10]algorithm,and backpropagation(BP)[11]algorithm.Research on bearing fault diagnosis based on pattern recognition commonly used signal processing technology to deal with the fault data collected by the sensor and feature extraction,and then use pattern recognition method for fault diagnosis and classification.Among them, the commonly used signal processing methods contain Wavelet Transform (WT) [12],Fourier Transform (FT) [13], Empirical Mode Decomposition[14],and Variational Modal Decomposition[15].The above fault diagnosis method based on pattern recognition has strong robustness and realises the fault diagnosis and classification of bearings to a certain extent.However, when the number of samples is large or unbalanced, the training effect of the model is poor, and there is a large space for progress in multi-class bearing fault classification tasks.

    With the rapid development of computer science and artificial intelligence, a deep neural network has been widely studied and applied in the field of industrial process anomaly monitoring due to its strong self-learning and adaptive characteristics.The data-driven deep learning neural network is widely used in the field of bearing fault diagnosis.The deep learning algorithm in the field of bearing fault diagnosis is mainly composed of four basic network frameworks: stack self-coding network (SAE) [16], deep belief network [17],Convolutional neural network (CNN) [18], and recurrent neural network[19].It has developed to the recent Deformable Convolution Network(DCN)[20],Residual Network(ResNet)[21], Long Short-Term Memory Network [22], Capsule Network [23], Transfer Network [24] and their variants.

    The application of deep learning in the field of bearing fault diagnosis is mainly divided into three methods: fault feature extraction based on deep learning,fault classification based on deep learning,and end-to-end fault feature extraction and fault diagnosis based on deep learning[25].For example,for the first method,[26]designed a bearing fault diagnosis method based on deep convolution neural network feature extraction and SVM fault classification for the multi-fault vibration signal of rotating machinery, which was assisted by two additional time-domain features extracted by human experts, and the diagnostic accuracy was up to 98.71%.For the second method, Qi et al.[27]proposed a fault diagnosis model based on a stacked sparse autoencoder.Withoutrequiring too much prior knowledge,deep learning is used to automatically extract more abstract and representative features.Combined with statistical analysis technology,industrial process monitoring is realised.The researchon the third method is the most extensive among the three research ideas.Zhou et al.[28] used continuous WT to convert onedimensional vibration signal into two-dimensional timefrequency image, and then used the network combined with CNN and a non-linear autoregressive neural network to extract and diagnose the fault feature.Bai et al.[29] proposed a data enhancement technology based on multi-channel CNN and multi-scale shear fusion from the requirement of training data.Firstly,the data were transformed into time-frequency images by short-time FT.Secondly,the end-to-end bearing fault diagnosis with low complexity, high robustness, and high accuracy was realised by using the designed network.

    The existing methods based on deep learning can effectively extract fault features and complete fault classification tasks.However, in view of the strong non-linear coupling of the fault adjacent features of the bearing with noise in space and the low spatial discrimination,the existing methods mostly rely on the depth network for spatial decoupling.The stronger the coupling of data features is,the deeper the depth and width of the depth network are required.A deeper and wider model means a better non-linear expression ability, which can learn more complex transformations and thus fit more complex feature inputs.However, deeper and wider models require more training samples.Under actual conditions, the richness and diversity of fault samples are limited,which can easily lead to overfitting of depth models and reduce the generalisation ability of networks.

    Therefore, in this paper, aiming at the fault data itself, a data preprocessing method of modified kernel principal component analysis (MKPCA) is introduced to decouple the spatial distribution, improve the spatial discrimination of fault categories,and realise the spatial decoupling of features.At the same time, a residual network with deformable convolution(DC-ResNet)with the ability to deal with noise interference is proposed to achieve high-precision and high-efficiency bearing fault diagnosis.Based on the decoupling ability of data and network model, this hybrid model of MKPCA and DCResNet is proposed.Firstly, Gaussian noise with different signal-to-noise ratios (SNRs) is added to the data to simulate different degrees of noise in the actual acquisition process.The improved KPCA MKPCA is used to map the kernel space of the fault signal containing different SNRs to reduce the data dimension and eliminate some noise effects.Finally,the DC-ResNet network is used to further filter the noise effects and fully extract the fault characteristics through the training of the preprocessed data.The algorithm is tested on the Case Western Reserve University (CWRU) and Xi'an Jiaotong University and Changxing Sumyoung Technology Co., Ltd.(XJTU-SY) bearing data sets with different SNR noise,and the fault diagnosis accuracy can reach 100%in 40 iterations.The experimental results show that the algorithm has an excellent effect on bearing fault diagnosis with noise.

    The innovations and contributions of this paper are summarised as follows.

    ? A novel modified KPCA (MKPCA) data preprocessing method is developed to decouple the spatial distribution,improve the spatial discrimination of fault categories, and realise the spatial decoupling of features.

    ? A new fault diagnosis method based on modified KPCA(MKPCA) and DC-ResNet deep learning algorithm is proposed to achieve 100% diagnostic accuracy for rolling bearings with noise signal.

    ? Comprehensive experiments are designed and carried out to fully verify the effectiveness of MKPCA and DC-ResNet model by comparison with CNN model and ResNet model under the noise with different SNRs.

    2 | RELATED WORK

    2.1 | Signal-to-noise ratios

    In the industrial processes, the collected bearing fault data by several sensors is normally in the form of vibration signals.Due to the mechanical characteristics of the rolling bearing,irrelevant information is inevitably contained in signals.This irrelevant information is called noise.In the process of fault diagnosis,the amount of noise contained in collected data will affect the accuracy of diagnosis to different degrees.The SNRs are proposed to quantify the level of noise contained in the signals.It is the ratio of signal power to the noise power,which is expressed by Equation (1).

    The higher the SNR,the less noise is mixed into the signal.When SNR is 0,the proportion of fault signal and noise signal is the same.Figure 1 shows the graphs of original signal,noise and their superimposed signal on CWRU data.

    wherePsdenotes the power of signals andPnis the power of noise.

    To realise a better real simulation of noise, Gaussian noise is used as the noise source to add to the public bearing data sets.In real environments, noise is often not caused by a single source, but by a complex of noise from many different sources.Assuming that real noise is regarded as the sum of many random variables with different probability distributions and each random variable is independent.In that way, the normalised sum tends to a Gaussian distribution with the increase of the number of noise sources according to the Central Limit Theorem.Based on this assumption, the use of synthetic Gaussian noise is a simple and accurate approximation to deal with this complexity without knowing what the noise distribution is.The method of adding different SNR noises is elaborated as Algorithm 1.

    Algorithm 1 Add noise with the given SNRs to the signal Input: Original signal: xi Output:Final signal x with given SNR:Fsignal 1 Generating random noise with the same dimension as the input signal:2 Pn= 1iΣi0x2i 3 Pn=Ps/10SNR 10 4 noise= ——--Pn√ / ————————————————Rnoise-R2noise■5 Fsignal=xi +noise

    2.2 | Modified kernel principal component analysis

    In the research and application of fault diagnosis based on deep learning, it is necessary to collect and analyse a large number of data that reflect the fault characteristics.These data often contain multiple variables,and there may be a correlation between these variables.A large amount of data will undoubtedly provide a lot of information to facilitate the training of more accurate neural network models, but at the same time, it will increase the complexity and calculation of the network, thereby affecting the diagnostic efficiency.However,blind reduction of data or variables may lead to the loss of important information and make the network produce wrong conclusions.

    Principal component analysis is based on the above problems.Through spatial mapping, while reducing the number of indicators to be analysed, it minimises the loss of information contained in the original data, and then makes acomprehensive analysis of the collected data.Principal component analysis is applied to linear separable cases.When the original data are non-linear,KPCA is needed.The data set is mapped from n-dimensional to high-dimensionalN>nwith linear separable, and then it is reduced from Ndimensional to a low-dimensional.

    F I G U R E 1 The signal diagram of original, noise and its superposition on CWRU data.(a) fault type 1; (b) fault type 2; (c) fault type 3; (d) fault type 4;(e) fault type 5.

    In this paper, the KPCA is improved, and a spatial mapping data preprocessing method based on modified KPCA(MKPCA) is proposed.Gaussian radial basis function is used to convert the inner product operation of the feature space after non-linear transformation into the kernel function calculation of the original space, to realise the non-linear transformation space, feature space, and category space is realised.The standard MKPCA mapping matrix of five fault categories is calculated first.Then kernel space mapping of fault signals with different SNRs is performed to reduce the data dimension and eliminate some noise effects.

    Firstly, the square of Euclidean distance between data is calculated by Equation (2):

    Secondly,the kernel matrix K is calculated by Equations(3)and (4).

    F I G U R E 2 Residual block

    Finally, the eigenvalues of the kernel matrixKare calculated, and the eigenvectors corresponding to the eigenvalues are calculated to form the mapping matrixP.

    2.3 | ResNet

    The core of the deep residual network is to introduce a deep residual learning framework into the network.Compared with the characteristic that each stack layer of a CNN such as VGG-16 is directly suitable for a desired underlying mapping,ResNet explicitly makes these layers suitable for a residual mapping[30].The residual network is composed of a series of residual blocks, as shown in Figure 2.

    A residual block can be represented by Equation (5):

    wherexlandxl+1are the input and output,F(xl,Wl) is the residual part, and refers to the gap between the predicted and observed values.The layer of the network can usually be seen asy=H(x), and a residual block of the residual network can be expressed asH(x)=F(x) +x,that is,in the unit mapping,y=H(x)is the observed value,but theH(x)predicted value,soF(x)corresponds to the residual, so it is called the residual network.

    In the convolution network,the number of feature maps ofxlandxl+1is different, and then 1×1 convolution is needed for dimension elevation or dimension reduction, as shown in Figure 3.

    F I G U R E 3 Residual block with dimensions up or down

    The residual blocks in the residual network have two forms, as shown in Figure 4 respectively.Among them,Figure 4a is applied to ResNet at 18 and 32 layers, namely ResNet-18/32, Figure 4b is applied to ResNet at 50, 101, and 152 layers, namely ResNet-50/101/152.

    3 | FAULT DIAGNOSIS OF ROLLING BEARINGS WITH NOISE SIGNAL BASED ON DC-ResNET

    F I G U R E 4 Two forms of convolution in the residual block

    Convolutional neural networks have made breakthrough achievements in image classification, behaviour recognition,and other fields due to their strong feature extraction ability.The stacked layers in the network can integrate shallow,middle, and deep features, and achieve an end-to-end classification and recognition effect.Due to the above characteristics and intelligent classification characteristics, in recent years, many studies have introduced it into the field of intelligent fault diagnosis and it plays an important role in the field of bearing fault diagnosis.In the application process,some image classification and behaviour recognition processes need to use the deep features contained in the data, so it is necessary to deepen the number of network layers to extract deep features.In the actual training process, to a certain extent, with the increase in the number of network layers, the training loss will increase and the classification accuracy will decrease.This is because the increase in the number of network layers will lead to gradient disappearance and gradient explosion.Although the addition of BatchNorm,ReLu, Dropout regularisation, and other technical means can alleviate the problem of reduced training accuracy caused by overfitting to some extent, the effect remains to be improved,and the gradient disappearance and gradient explosion are not caused by overfitting.The purpose of ResNet can effectively solve the above problems, and its successful application in bearing fault diagnosis ensures the accuracy and efficiency of diagnosis [31, 32].Figure 5 gives the overall flow of the algorithm, and Table 1 gives the specific parameters of DCResNet used in this paper.

    The residual network used in this work is to add the residual unit shown in Figure 4b to the classical VGG deep learning model to form ResNet-101.Furthermore, the deformable convolution is introduced into ResNet, replacing the ordinary convolution at the first layer of the network with the deformable convolution [33] to form the proposed DCResNet.The deformable convolution can fully extract the fault information contained in the data at the first layer of the network with its adaptive convolution kernel [34].It provides convenience for the subsequent residual module to extract fault information and noise information.The deformable convolution operation is shown in Equation (6).

    F I G U R E 5 Overall flowchart of modified kernel principal component analysis (MKPCA) + DC-ResNet.

    T A B L E 1 Parameters of DC-ResNet model

    F I G U R E 6 Network framework of modified kernel principal component analysis (MKPCA) + DC-ResNet.

    where ?tnis the offset learnt by the extra convolution layer.

    The algorithm is mainly composed of spatial mapping preprocessing of noisy data and residual network fusion deformable convolution deep learning network model.Firstly,Gaussian noise with different SNRs is added to the original data collected by the sensor to simulate the different degrees of noise interference in the process of actual data acquisition.Modified kernel principal component analysis spatial mapping is used to reduce the data dimension and eliminate part of the noise data.The data after spatial mapping is converted into a two-dimensional graphical residual network fusion deformable convolution input deep learning network,and the bearing fault diagnosis model is trained.Figure 6 shows the network diagram of model training.The data preprocessing method of MKPCA can decouple the spatial distribution, improve the spatial discrimination of fault categories,and realise the spatial decoupling of features.The DC-ResNet has the ability to deal with noise interference to achieve high-precision and highefficiency bearing fault diagnosis.The hybrid model of MKPCA and DC-ResNet proposed in this paper has an excellent effect on bearing fault diagnosis with noise.

    4 | THE DESCRIPTION OF TWO CASE STUDIES

    In the actual industrial production process, due to external factors such as overload of mechanical equipment, excessive vibration frequency, or internal factors such as fatigue of bearing materials and long service life, various degrees and different types of bearing faults will be caused.According to the bearing components and structural characteristics of rolling bearings, rolling bearing faults are often divided into wear,fracture,corrosion, and deformation of different parts.In this study,deep learning technology is used to diagnose and classify the wear, fracture, and deformation of the outer ring, inner ring, and rolling body in different degrees.

    Due to the importance and wide applicability of rolling bearings, they are often used with different mechanical equipment in various industrial backgrounds and working environments.Therefore, rolling bearings under different working environments have different working mechanisms and failure modes.In this paper,the working environment and fault types of two common bearing data sets are described in detail.

    4.1 | The case study of CWRU

    CWRU is a bearing dataset provided by Case Western Reserve University.The data acquisition experiment platform is shown in Figure 7[35],which includes the data of fan end,drive end,and ball end.The three channel fault data are respectively collected by three sensors.The CWRU dataset used in this paper contains 5 types of faults that occur to the roller, inner ring,outer ring 3 points,outer ring 6 points and outer ring 12 points.The main fault types are shown in Table 2.In Table 2,12k represents the fault sampling frequency of 12 kHz, 0.007,0.014, 0.021 refer to diameter respectively.

    F I G U R E 7 CWRU testing rig

    The CWRU dataset used in this study includes 9900 training datasets and 375 test datasets.The sizes of the training and testing datasets are [9900, 2048, 2] and [375, 2048, 2]respectively.Each dataset has 2 dimensions, and each dimension contains 2048 data points.To a certain extent, the more data,the better the stability and robustness of the deep learning network.Therefore, in order to make the dataset contain a sufficient number of samples, the data is repeatedly selected with a certain step size to prepare the training dataset and test dataset.

    T A B L E 3 Working environment of XJTU-SY bearing data

    T A B L E 2 Five fault types of CWRU datasets

    T A B L E 4 Fault types of XJTU-SY bearing data set at 2100 rpm (3 5 Hz and 12 kN)

    F I G U R E 8 XJTU-SY testing rig

    4.2 | The case study of XJTU-SY

    XJTU-SY bearing dataset provided by the Institute of Design Science and Basic Parts, Xi'an Jiaotong University [36].The test bench is shown in Figure 8.There are 3 vibration frequencies, 2100 rpm (35 Hz) and 12 kN, 2250 rpm (37.5 Hz)and 11 kN, 2400 rpm (40 Hz) and 10 kN respectively.Each frequency contains five fault types.Therefore, the data set contains 15 kinds of complete operation rolling bearings fault data.These data are obtained by several accelerated degra-dation experiments.In this study, only five fault categories are included in the 35 Hz vibration frequency.The XJTU-SY bearing data set has two channels: vertical vibration and horizontal vibration.The bearing working data of two channels are collected by two sensors in a specific working environment, as shown in Table 3 and the fault type as shown in Table 4.

    T A B L E 5 Maximum test accuracy of the model under different signal-to-noise ratios (SNRs) within 30 iterations

    T A B L E 6 Test loss and accuracy on CWRU datasets with different signal-to-noise ratios (SNRs) in 30 iterations

    All kinds of fault type data in XJTU-SY rolling bearing dataset are composed of two-dimensional horizontal vibration signals and vertical vibration signals.Only horizontal vibration signals are used in this paper.

    5 | EXPERIMENTAL RESULTS AND DISCUSSION

    Intel (R) Core (TM) I7-9700 CPU @K3.60 GHz processor with memory of 32.0 GB was used in the experiment, and NVIDIA GeForce GTX 1080 GPU was used in the experiment under the 64-bit Window system.Python was used as the programming language for MKPCA spatial mapping data preprocessing and network structure construction under the PyCharm integrated development environment.In the training and testing process of DC-ResNet fault diagnosis model,Batch-size and learning rate are 128 and 0.001, respectively,and the training link is iterative 30 times.

    F I G U R E 9 Comparison for different signal-to-noise ratios (SNR) of Convolutional neural network (CNN), ResNet and DC-ResNet on CWRU.

    F I G U R E 1 0 Comparison for different signal-to-noise ratios (SNR) of Convolutional neural network (CNN), ResNet and DC-ResNet on XJTU-SY.

    In order to collect fault data and contain noise as widely as possible in engineering operations, noise with signal-to-noise ratio of -2, 1, 2, 10, 20, 30, 60 is added to the original fault data in this experiment.When the signal-to-noise ratio is negative, that is, the noise and other irrelevant factors in the signal are higher than the useful fault data.The lower the signal-to-noise ratio, the more the noise data contained.The maximum value of the signal-to-noise ratio is 60.When the signal-to-noise ratio is 0,the proportion of the fault signal and the noise signal is the same.This algorithm is verified on the public bearing datasets of CWRU and XJTU-SY.The maximum training accuracy and test accuracy of the model are 100%within 30 iterations,as shown in Table 5.The results of CWRU and XJTU-SY datasets under different SNRs are described in the following respectively.

    Tables 6 and 7 show the test loss and accuracy on CWRU and SJTU-SY datasets under different SNRs within 30 iterations.

    Since the lower the signal-to-noise ratio is,the more noise the fault data contain, Tables 6 and 7 only show the test loss and accuracy of the fault diagnosis model when the signal-tonoise ratio is -2, 1, 2, 10, and 20.When the signal-to-noise ratio is 30 and 60, the model reaches 100% diagnostic accuracy earlier than 15 epochs.

    In order to fully verify the advantages of the DC-ResNet deep learning fault diagnosis model proposed in this paper,the fault data under different SNR are tested on the ordinary CNN (CNN) and residual network (ResNet), and the diagnostic accuracy is compared.Figures 9 and 10 show the comparison curves of the diagnostic accuracy on CNN,ResNet and DC-ResNet between the fault data without noise signal and the SNR of-2,1,2,10,and 20 on the CWRU and XJTU-SY bearing data sets respectively.

    In Figures 9 and 10,red,blue,and green lines represent the diagnostic accuracy of DC-ResNet, CNN, and ResNet networks respectively.It can be seen from Figure 9 that the red line is close to the green line, and the blue line is relatively distributed in the lower half of the image, that is, the CWRU bearing data with noise have high diagnostic accuracy and consistent diagnostic effect on DC-ResNet and ResNet networks.The effect on CNN network is poor.It can be seen from Figure 10 that there are certain differences among the three lines, and the red lines are above the other two lines under different SNRs, that is, the XJTU-SY bearing data with noise have the best diagnostic effect on DC-ResNet.Overall,the DC-ResNet proposed in this paper has an excellent effect on bearing fault diagnosis with noise.

    F I G U R E 1 1 The diagnostic accuracy histograms of different noises on CWRU dataset on Convolutional neural network(CNN),ResNet and DC-ResNet.

    F I G U R E 1 2 The diagnostic accuracy histograms of different noises onXJTU-SY dataset on Convolutional neural network (CNN), ResNet and DCResNet.

    Figures 11 and 12 show the diagnostic accuracy of CWRU and XJTU-SY data under different noise levels in three deep learning networks in the form of a histogram, which more intuitively shows the superiority of DC-ResNet in the stabilityand diagnostic accuracy of CWRU and XJTU-SY bearing data with noise.

    T A B L E 8 Accuracy and computational complexity comparison of the proposed method and other methods

    The confusion matrix is the correspondence between the predicted label and the real label.The diagnostic accuracy of the noise-containing fault data on the DC-ResNet network model under different SNRs after MKPCA high-dimensional spatial mapping is 100%, that is, the predicted label is completely corresponding to the real label.In order to avoid overstatement,only the confusion matrix of the diagnosis results of XJTU-SY bearing data on the 3 deep learning network models is typical when the SNR is-2, 1, 10, and 30.The utility of the DC-ResNet model is expressed from the correspondence between the predicted label and the real label.Figures 13–15 give confusion matrix diagrams of three deep learning network models when SNR is-2, 1, 10, and 30 respectively.

    F I G U R E 1 3 Fault diagnosis confusion matrix diagram of XJTU-SY data on Convolutional neural network (CNN) model under different SNRs.

    F I G U R E 1 4 Fault diagnosis confusion matrix diagram of XJTU-SY data on ResNet model under different SNRs.

    The number in the confusion matrix graph represents the correspondence between the predicted label and the real label,that is, the diagnostic accuracy of each fault category, 1 being the highest diagnostic accuracy.For 500 data with a real label of two in a fault category,if the predicted label is all 2,the number‘1’ appears in the rectangular block of the third row and the third column, and the number is all 0 in the other rectangular blocks of the third row.If the predicted labels are all 3,then the number ‘1’ appears in the rectangular block of the fourth column in the third row, and the number is 0 in other rectangular blocks in the third row, which is the same as the theorem.The colour depth of rectangular blocks in the graph also represents the diagnostic effect.As the colour column on the right side of each subgraph shows,the deeper the colour is,the greater the number is, that is, the more the corresponding number is.It can be seen from Figures 13–15 that for the noise-containing fault data with different SNR, the diagnostic effect of CNN network is worse than that of ResNet and DCResNet networks, and that of ResNet network is worse than that of DC-ResNet.

    In order to fully verify the usability of the proposed DCResNet model, this paper compares the computational complexity of the model with CNN and ResNet.Parameters(Params) and floating-point operations (FLOPs) are measurable indexes to show the computational complexity of a deep learning model.Table 8 presents the accuracy, Params and FLOPs of three deep learning models.It can be seen from Table 8 that the DC-ResNet model has the highest accuracy when the parameters are moderate.

    To sum up, through the experiments under different data sets and different SNR, and the comparison with CNN and ResNet network diagnostic accuracy,it is fully verified that the proposed algorithm in this chapter has high diagnostic accuracy and stable diagnostic effect for bearing fault data with noise.

    6 | CONCLUSION

    F I G U R E 1 5 Fault diagnosis confusion matrix diagram of XJTU-SY data on DC-ResNet model under different SNRs.

    The bearing fault diagnosis algorithm based on improved KPCA high-dimensional space mapping and fusion of deformable convolution residual network is designed in this chapter.Aiming at the bearing fault data containing noise factors collected by the sensor, MKPCA high-dimensional space mapping is applied to reduce the data dimension and eliminate some noise interference at the same time.The mapped data are converted into two-dimensional images to construct the training set and test set.The DC-ResNet deep learning network is used to fully extract the fault characteristics, noise information and other factors contained in the image of the training set to realise the classification and diagnosis of bearing faults.By adding noise with different SNR to CWRU and XJTU-SY common bearing data sets,the diagnosis experiment is carried out, which fully reflects the applicability of the algorithm designed in this paper to the fault diagnosis of bearing with noise, and shows the superiority of the algorithm designed in this chapter in the diagnosis accuracy.At the same time, the comparative experiments with CNN and ResNet networks show that the residual network designed in this chapter with deformable convolution is superior to the ordinary convolution neural network and the ordinary residual network in the fault diagnosis of noise bearing.

    ACKNOWLEDGEMENT

    We thank the anonymous reviewers for their valuable suggestions and comments on this work.We also wish to thank the authors of DCN for providing the source code.

    This research was funded by the Foundation of the National Natural Science Foundation of China grant number 61973105, 61573130 and 52177039; the Fundamental Research Funds for the Universities of Henan Province (NO.NSFRF200504); The Key Technologies R&D Program of Henan Province of China(NO.212102210145,212102210197 and NO.222102220016).

    CONFLICT OF INTEREST

    No potential conflicts of interest are reported by the authors.

    DATA AVAILABILITY STATEMENT

    The data that support the findings of this study are available from the corresponding author upon reasonable request.

    ORCID

    Menglin Zhouhttps://orcid.org/0000-0003-4395-5256

    精品国产一区二区久久| 国产1区2区3区精品| 黄色毛片三级朝国网站| 一区二区三区国产精品乱码| 国产精品野战在线观看 | 精品卡一卡二卡四卡免费| av天堂久久9| 免费在线观看日本一区| 黄色a级毛片大全视频| 看片在线看免费视频| 咕卡用的链子| www日本在线高清视频| 亚洲中文日韩欧美视频| 国产一区二区在线av高清观看| 大陆偷拍与自拍| 香蕉丝袜av| 一夜夜www| 高清毛片免费观看视频网站 | a在线观看视频网站| 欧美日韩黄片免| 老汉色∧v一级毛片| 午夜免费成人在线视频| 亚洲片人在线观看| 两个人免费观看高清视频| 久久精品国产清高在天天线| 久久久久久久午夜电影 | 亚洲色图综合在线观看| 国产精品乱码一区二三区的特点 | 在线观看免费高清a一片| 女警被强在线播放| 新久久久久国产一级毛片| 亚洲自拍偷在线| 欧美老熟妇乱子伦牲交| 十八禁网站免费在线| 久久久精品欧美日韩精品| 日韩高清综合在线| 久久久久久亚洲精品国产蜜桃av| 精品国内亚洲2022精品成人| 亚洲精品一卡2卡三卡4卡5卡| 精品人妻1区二区| 久久精品国产清高在天天线| 国产精品国产av在线观看| 国产乱人伦免费视频| 精品少妇一区二区三区视频日本电影| 夜夜看夜夜爽夜夜摸 | 亚洲精品成人av观看孕妇| 一级黄色大片毛片| 少妇 在线观看| 一级黄色大片毛片| 免费久久久久久久精品成人欧美视频| 黄色丝袜av网址大全| 怎么达到女性高潮| 欧美日韩国产mv在线观看视频| 亚洲一区中文字幕在线| 日本免费一区二区三区高清不卡 | 巨乳人妻的诱惑在线观看| 中文字幕人妻丝袜制服| 久久伊人香网站| 9热在线视频观看99| 国产真人三级小视频在线观看| 久久精品国产亚洲av高清一级| www国产在线视频色| 超碰成人久久| 男人舔女人下体高潮全视频| 在线观看午夜福利视频| 免费观看精品视频网站| 欧美+亚洲+日韩+国产| 国产精品日韩av在线免费观看 | 看片在线看免费视频| 伊人久久大香线蕉亚洲五| 色综合站精品国产| 三级毛片av免费| 一级毛片高清免费大全| av中文乱码字幕在线| 大陆偷拍与自拍| 欧美丝袜亚洲另类 | 啦啦啦免费观看视频1| 亚洲国产精品一区二区三区在线| 搡老乐熟女国产| 亚洲中文字幕日韩| 色综合站精品国产| 欧美黄色淫秽网站| 亚洲精品国产一区二区精华液| av视频免费观看在线观看| 久久精品国产亚洲av香蕉五月| 国产精品爽爽va在线观看网站 | 自拍欧美九色日韩亚洲蝌蚪91| 亚洲在线自拍视频| 亚洲一区二区三区不卡视频| 激情视频va一区二区三区| 嫩草影视91久久| 久久久国产欧美日韩av| 好男人电影高清在线观看| 亚洲国产精品999在线| 国产精品爽爽va在线观看网站 | 国产成人精品久久二区二区免费| 97人妻天天添夜夜摸| 久久久国产欧美日韩av| 国产免费现黄频在线看| 亚洲九九香蕉| 视频区图区小说| 黑人猛操日本美女一级片| 免费在线观看视频国产中文字幕亚洲| 国产视频一区二区在线看| 不卡一级毛片| 国产精品影院久久| 老汉色∧v一级毛片| 老司机靠b影院| 亚洲欧洲精品一区二区精品久久久| 啦啦啦在线免费观看视频4| 黑人巨大精品欧美一区二区mp4| 婷婷精品国产亚洲av在线| 亚洲国产精品999在线| 精品人妻在线不人妻| 亚洲精品国产精品久久久不卡| 母亲3免费完整高清在线观看| 色精品久久人妻99蜜桃| 别揉我奶头~嗯~啊~动态视频| 法律面前人人平等表现在哪些方面| 丝袜美足系列| 亚洲人成网站在线播放欧美日韩| 涩涩av久久男人的天堂| 99精品欧美一区二区三区四区| 欧美激情高清一区二区三区| 51午夜福利影视在线观看| 男女午夜视频在线观看| 欧美黑人欧美精品刺激| 日本a在线网址| 操出白浆在线播放| 亚洲国产中文字幕在线视频| 日韩免费高清中文字幕av| 可以免费在线观看a视频的电影网站| 午夜福利在线观看吧| 1024视频免费在线观看| 热99re8久久精品国产| 国产亚洲欧美98| 成人亚洲精品一区在线观看| 男女之事视频高清在线观看| 久久99一区二区三区| 亚洲色图 男人天堂 中文字幕| av福利片在线| 黄色女人牲交| 老司机靠b影院| 亚洲男人天堂网一区| 国产精品久久视频播放| 天堂影院成人在线观看| 国产99久久九九免费精品| ponron亚洲| 琪琪午夜伦伦电影理论片6080| 久久精品亚洲av国产电影网| 十分钟在线观看高清视频www| xxxhd国产人妻xxx| 成年版毛片免费区| 久久天堂一区二区三区四区| 久久久久久久精品吃奶| 免费不卡黄色视频| 国产人伦9x9x在线观看| 亚洲欧美日韩高清在线视频| 欧美日韩精品网址| 18禁黄网站禁片午夜丰满| 国产色视频综合| 最新在线观看一区二区三区| 日日爽夜夜爽网站| 国产精品1区2区在线观看.| 无遮挡黄片免费观看| 亚洲精品美女久久av网站| 日韩高清综合在线| 国产高清国产精品国产三级| 亚洲精品在线观看二区| 久久精品成人免费网站| 国产成+人综合+亚洲专区| 国产精品国产av在线观看| 久久香蕉激情| 久久国产精品影院| 91av网站免费观看| 国产99久久九九免费精品| 搡老岳熟女国产| 亚洲一区二区三区欧美精品| 成人18禁在线播放| 国产免费男女视频| 每晚都被弄得嗷嗷叫到高潮| 欧美黑人欧美精品刺激| 国产精品偷伦视频观看了| 91大片在线观看| 欧美日韩精品网址| 男人舔女人下体高潮全视频| 18禁美女被吸乳视频| 美女 人体艺术 gogo| 亚洲精品久久午夜乱码| 国产无遮挡羞羞视频在线观看| 午夜免费观看网址| 电影成人av| 亚洲国产中文字幕在线视频| 激情在线观看视频在线高清| 亚洲国产精品sss在线观看 | 国产黄色免费在线视频| 免费av中文字幕在线| 午夜激情av网站| 午夜福利欧美成人| 精品免费久久久久久久清纯| 少妇粗大呻吟视频| 欧美激情 高清一区二区三区| 一级,二级,三级黄色视频| 美女扒开内裤让男人捅视频| 欧美性长视频在线观看| 久久国产乱子伦精品免费另类| 国产免费现黄频在线看| 女警被强在线播放| 免费一级毛片在线播放高清视频 | 亚洲精品一区av在线观看| 亚洲av成人av| 香蕉国产在线看| 两个人看的免费小视频| 黄网站色视频无遮挡免费观看| 日本 av在线| 性色av乱码一区二区三区2| 99久久精品国产亚洲精品| 精品高清国产在线一区| 97碰自拍视频| 淫秽高清视频在线观看| 日本撒尿小便嘘嘘汇集6| 精品久久久精品久久久| 最好的美女福利视频网| 黑丝袜美女国产一区| 精品无人区乱码1区二区| 在线观看舔阴道视频| 国产精品影院久久| 极品教师在线免费播放| 十分钟在线观看高清视频www| 美国免费a级毛片| 亚洲第一av免费看| 高清黄色对白视频在线免费看| 精品日产1卡2卡| 手机成人av网站| 一区二区日韩欧美中文字幕| 久久亚洲真实| 久久午夜综合久久蜜桃| 亚洲专区国产一区二区| 亚洲,欧美精品.| 后天国语完整版免费观看| 淫妇啪啪啪对白视频| 亚洲国产欧美日韩在线播放| 长腿黑丝高跟| 日韩有码中文字幕| 亚洲中文日韩欧美视频| 女人高潮潮喷娇喘18禁视频| 国产有黄有色有爽视频| 国产精品亚洲av一区麻豆| 欧美日韩瑟瑟在线播放| 国产不卡一卡二| 老鸭窝网址在线观看| 久久午夜综合久久蜜桃| 欧美日韩黄片免| 国产午夜精品久久久久久| 美女 人体艺术 gogo| 精品久久久精品久久久| 国产在线观看jvid| 大型av网站在线播放| 搡老乐熟女国产| 日本黄色视频三级网站网址| 久久香蕉国产精品| 最新在线观看一区二区三区| svipshipincom国产片| 亚洲国产欧美一区二区综合| 老司机午夜十八禁免费视频| 国产精品久久电影中文字幕| 国产熟女午夜一区二区三区| 淫妇啪啪啪对白视频| 天天躁夜夜躁狠狠躁躁| 性色av乱码一区二区三区2| 一区二区三区精品91| 久久久精品欧美日韩精品| 久久这里只有精品19| 中文字幕最新亚洲高清| 一级,二级,三级黄色视频| 免费在线观看亚洲国产| 两个人看的免费小视频| 国产精品乱码一区二三区的特点 | tocl精华| 午夜免费鲁丝| 好男人电影高清在线观看| 99国产综合亚洲精品| 欧美一级毛片孕妇| 在线观看66精品国产| 国产精品二区激情视频| 黄色片一级片一级黄色片| 美国免费a级毛片| 久久亚洲精品不卡| 青草久久国产| 日日摸夜夜添夜夜添小说| 男女午夜视频在线观看| 欧美在线一区亚洲| 50天的宝宝边吃奶边哭怎么回事| 女人被躁到高潮嗷嗷叫费观| 少妇裸体淫交视频免费看高清 | 女警被强在线播放| 香蕉久久夜色| 久久精品国产亚洲av香蕉五月| 午夜精品在线福利| 亚洲av片天天在线观看| 村上凉子中文字幕在线| 电影成人av| av国产精品久久久久影院| 日本五十路高清| 母亲3免费完整高清在线观看| 黄色怎么调成土黄色| av中文乱码字幕在线| 亚洲一码二码三码区别大吗| 成人影院久久| ponron亚洲| 亚洲av第一区精品v没综合| 久久国产精品人妻蜜桃| 激情视频va一区二区三区| 欧美日韩中文字幕国产精品一区二区三区 | 日韩免费av在线播放| 中文字幕另类日韩欧美亚洲嫩草| √禁漫天堂资源中文www| 精品国产超薄肉色丝袜足j| 露出奶头的视频| 亚洲avbb在线观看| 在线观看www视频免费| 嫩草影院精品99| 欧美日韩中文字幕国产精品一区二区三区 | 一a级毛片在线观看| 国产精品成人在线| 午夜日韩欧美国产| 国产精品香港三级国产av潘金莲| 国产色视频综合| 好看av亚洲va欧美ⅴa在| 日韩 欧美 亚洲 中文字幕| 久久精品亚洲av国产电影网| 精品国产国语对白av| 国产亚洲精品第一综合不卡| 亚洲精华国产精华精| 高潮久久久久久久久久久不卡| 国产av在哪里看| 亚洲一区二区三区欧美精品| 麻豆一二三区av精品| 巨乳人妻的诱惑在线观看| 一级片免费观看大全| 久久青草综合色| 亚洲第一av免费看| 午夜精品在线福利| 欧美乱色亚洲激情| 亚洲视频免费观看视频| 热99re8久久精品国产| 精品福利观看| 国产三级黄色录像| 日韩欧美在线二视频| 老汉色∧v一级毛片| 亚洲欧美一区二区三区黑人| 国产在线精品亚洲第一网站| 久久人人精品亚洲av| 大香蕉久久成人网| 好看av亚洲va欧美ⅴa在| 欧美激情 高清一区二区三区| 99久久精品国产亚洲精品| 亚洲人成网站在线播放欧美日韩| 90打野战视频偷拍视频| 多毛熟女@视频| 免费在线观看影片大全网站| 亚洲国产精品一区二区三区在线| 午夜免费鲁丝| 欧美在线黄色| 精品熟女少妇八av免费久了| 欧美激情久久久久久爽电影 | 成在线人永久免费视频| 亚洲欧洲精品一区二区精品久久久| 亚洲av成人不卡在线观看播放网| 1024视频免费在线观看| 黄色毛片三级朝国网站| 精品一品国产午夜福利视频| 在线观看免费午夜福利视频| 97人妻天天添夜夜摸| 91成年电影在线观看| svipshipincom国产片| 嫩草影视91久久| 国产黄色免费在线视频| 亚洲一区二区三区不卡视频| 99精品欧美一区二区三区四区| 狂野欧美激情性xxxx| 每晚都被弄得嗷嗷叫到高潮| 在线看a的网站| 久久 成人 亚洲| 午夜福利一区二区在线看| aaaaa片日本免费| 亚洲中文字幕日韩| а√天堂www在线а√下载| 久久青草综合色| 日本 av在线| 免费在线观看亚洲国产| 成人特级黄色片久久久久久久| 黄频高清免费视频| 可以在线观看毛片的网站| 亚洲片人在线观看| 国产麻豆69| 日本黄色视频三级网站网址| 性色av乱码一区二区三区2| 亚洲 欧美一区二区三区| 久热这里只有精品99| 操美女的视频在线观看| 一区二区三区激情视频| 亚洲av第一区精品v没综合| 精品国内亚洲2022精品成人| 日韩精品免费视频一区二区三区| 国产极品粉嫩免费观看在线| 亚洲欧美日韩另类电影网站| 叶爱在线成人免费视频播放| 黄片播放在线免费| 在线国产一区二区在线| 国产亚洲精品久久久久久毛片| videosex国产| 制服人妻中文乱码| 国产成人精品久久二区二区免费| 女人被躁到高潮嗷嗷叫费观| 老鸭窝网址在线观看| 搡老熟女国产l中国老女人| 国产亚洲欧美在线一区二区| 精品久久久久久久久久免费视频 | 久久中文字幕一级| 美女福利国产在线| 亚洲精品美女久久av网站| 久久热在线av| 久久久久久免费高清国产稀缺| 九色亚洲精品在线播放| 日韩欧美三级三区| 人妻久久中文字幕网| 亚洲专区中文字幕在线| 国产伦人伦偷精品视频| 看黄色毛片网站| 国产蜜桃级精品一区二区三区| 国产精品秋霞免费鲁丝片| 国产亚洲精品久久久久久毛片| 最近最新中文字幕大全免费视频| 亚洲欧美一区二区三区久久| 午夜福利免费观看在线| 一级毛片女人18水好多| 国产91精品成人一区二区三区| 亚洲avbb在线观看| 99国产极品粉嫩在线观看| 免费搜索国产男女视频| 美女福利国产在线| 十八禁网站免费在线| 亚洲精品国产色婷婷电影| 亚洲成国产人片在线观看| 亚洲欧美日韩无卡精品| 久久人妻熟女aⅴ| 热re99久久国产66热| 99国产精品免费福利视频| 法律面前人人平等表现在哪些方面| 新久久久久国产一级毛片| av福利片在线| 国产无遮挡羞羞视频在线观看| 久久天躁狠狠躁夜夜2o2o| 色婷婷久久久亚洲欧美| 国产精品自产拍在线观看55亚洲| 黑人欧美特级aaaaaa片| 日韩欧美一区二区三区在线观看| 老司机福利观看| 涩涩av久久男人的天堂| 久99久视频精品免费| 身体一侧抽搐| www.www免费av| 国产精品1区2区在线观看.| 亚洲精品中文字幕一二三四区| 成人永久免费在线观看视频| 精品久久久久久久毛片微露脸| 丁香六月欧美| 日韩三级视频一区二区三区| 久久国产亚洲av麻豆专区| 久久人妻熟女aⅴ| 亚洲精品一卡2卡三卡4卡5卡| 后天国语完整版免费观看| 亚洲伊人色综图| 高清av免费在线| 亚洲第一青青草原| 黑人操中国人逼视频| 人成视频在线观看免费观看| 国产成人欧美| 中文字幕色久视频| 88av欧美| 成人永久免费在线观看视频| 99riav亚洲国产免费| 亚洲 国产 在线| 久久草成人影院| 亚洲激情在线av| 一区二区三区国产精品乱码| 一个人观看的视频www高清免费观看 | 久久人妻av系列| 成人免费观看视频高清| 黑人操中国人逼视频| 老鸭窝网址在线观看| 老司机靠b影院| 欧美中文日本在线观看视频| 精品乱码久久久久久99久播| 国产99久久九九免费精品| 19禁男女啪啪无遮挡网站| 久久青草综合色| 91精品三级在线观看| av片东京热男人的天堂| 亚洲成人久久性| 久久久国产成人免费| 亚洲精品中文字幕在线视频| 91国产中文字幕| 国产精品亚洲一级av第二区| 中国美女看黄片| 好看av亚洲va欧美ⅴa在| 岛国视频午夜一区免费看| 9色porny在线观看| 午夜福利欧美成人| 国产极品粉嫩免费观看在线| 欧美日韩亚洲高清精品| 日本一区二区免费在线视频| 国产精品香港三级国产av潘金莲| 日日夜夜操网爽| 亚洲欧美一区二区三区黑人| 999精品在线视频| www国产在线视频色| 日韩欧美三级三区| 久久精品亚洲精品国产色婷小说| 91国产中文字幕| 亚洲成人免费av在线播放| 黄色丝袜av网址大全| 90打野战视频偷拍视频| 少妇 在线观看| 亚洲人成伊人成综合网2020| 国产主播在线观看一区二区| 久久国产亚洲av麻豆专区| 人成视频在线观看免费观看| 三上悠亚av全集在线观看| 高清av免费在线| 欧美激情极品国产一区二区三区| 亚洲av五月六月丁香网| 女警被强在线播放| av视频免费观看在线观看| 色综合婷婷激情| 久久久久久久久久久久大奶| www.自偷自拍.com| 伦理电影免费视频| 俄罗斯特黄特色一大片| 久久精品91蜜桃| 久久精品国产99精品国产亚洲性色 | 亚洲少妇的诱惑av| 欧美大码av| 欧美激情高清一区二区三区| 亚洲精品国产区一区二| 成熟少妇高潮喷水视频| 亚洲中文av在线| 97人妻天天添夜夜摸| 无人区码免费观看不卡| 在线永久观看黄色视频| 搡老熟女国产l中国老女人| 一区二区三区精品91| 天天躁狠狠躁夜夜躁狠狠躁| 黄片播放在线免费| 欧美成人性av电影在线观看| 三上悠亚av全集在线观看| √禁漫天堂资源中文www| 国产成人精品在线电影| 黑人巨大精品欧美一区二区mp4| 97超级碰碰碰精品色视频在线观看| 宅男免费午夜| 两性午夜刺激爽爽歪歪视频在线观看 | 欧美精品啪啪一区二区三区| av福利片在线| 国产免费av片在线观看野外av| 9191精品国产免费久久| 嫁个100分男人电影在线观看| 波多野结衣av一区二区av| 一级毛片女人18水好多| 久久久久久久久久久久大奶| 人人妻,人人澡人人爽秒播| 国产精品一区二区在线不卡| 日韩欧美免费精品| 12—13女人毛片做爰片一| 多毛熟女@视频| 极品教师在线免费播放| 亚洲一区二区三区色噜噜 | 国产三级在线视频| 50天的宝宝边吃奶边哭怎么回事| 亚洲aⅴ乱码一区二区在线播放 | 多毛熟女@视频| 成在线人永久免费视频| 国产无遮挡羞羞视频在线观看| 国产亚洲欧美精品永久| 露出奶头的视频| 黄网站色视频无遮挡免费观看| 精品久久蜜臀av无| 琪琪午夜伦伦电影理论片6080| 国产亚洲av高清不卡| 久久草成人影院| 成人免费观看视频高清| 亚洲欧美激情在线| 色综合欧美亚洲国产小说| 女生性感内裤真人,穿戴方法视频| 亚洲色图av天堂| 色婷婷av一区二区三区视频| 岛国视频午夜一区免费看| 99热国产这里只有精品6| 在线观看一区二区三区激情| 国产精品野战在线观看 | 午夜精品国产一区二区电影| 级片在线观看| 18禁美女被吸乳视频| 成人国产一区最新在线观看| 成人18禁高潮啪啪吃奶动态图| 国产亚洲精品久久久久5区| 欧美日韩亚洲高清精品| 成人影院久久| 国产成人精品无人区| 国产一区二区三区视频了| 成人国语在线视频| 国产91精品成人一区二区三区| 两人在一起打扑克的视频| 成人永久免费在线观看视频|