• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Recent advances in the synthesis and energetic properties of potassium-based potential green primary explosives

    2022-11-28 15:48:52QmrunNisTriqSirMnzoorMherunNisTriqWenLiCoJinGuoZhng
    Defence Technology 2022年11期

    Qmr-un-Nis Triq ,Sir Mnzoor ,Mher-un-Nis Triq ,Wen-Li Co ,Jin-Guo Zhng ,*

    a State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing,100081,China

    b Department of Chemistry,University of Okara,Okara,56300,Pakistan

    Keywords:Green primary explosives Heterocyclic compounds Synthesis Energetic properties

    ABSTRACT Primary explosives are utilized as a reliable initiator for secondary explosives in an extensive range of military and civilian operations.Heavy-metal-based primary explosives are moderate performing,more sensitive,and environmentally hazardous,posing a direct and indirect threat to health and safety.Therefore,heavy-metal-based primaries have been replaced by environment-friendly metal-based primary explosives,such as potassium complexes.This review presents not only a summary of the current progress of new-generation potassium-based primary explosives and their methods of preparation,energetic properties,and applications,but also a further comparison with traditional primary explosives.In addition,this work discusses the necessity of heavy metal-free primary explosives and the major challenges faced in replacing traditional primary explosives.

    1.Introduction

    In the past few decades,researchers have paid great attention to the production of energetic materials,such as propellants,pyrotechnics,and explosives,due to their applications in civilian and military areas[1].Primary explosives(primaries)are defined as energetic materials that possess remarkably high initiation sensitivities to different stimuli,such as impact,friction,electrostatic discharge,heat,and shock[2].For initiations of devices in industries,primary explosives are extensively used.Primary explosives are very sensitive and reach detonation rather quickly via encountering any of these initiating events[3].The initiation of primary explosives,usually in the form of shockwaves or heat energy,produce a large amount of energy used to initiate the less sensitive energetic materials,including pyrotechnics,propellants,and secondary explosives[4].

    A crucial feature of primary explosives is their rapid deflagration-to detonation transition(DDT),and therefore,they are useful as initiators[5].The term high"initiating efficiency"refers to compounds that can detonate the large mass of secondary explosives.Only detonation tests(Fig.1)can determine this property;compounds with a higher degree of sensitivity are more likely to undergo rapid DDT[6].Primaries exhibit lower detonation heat,detonation pressure,and velocities as compared to secondary explosives.Primary explosives are less potent than secondary explosives,yet they still require extra care while being handled[7].This summary covers the transition from heavy-metal-based(mercury,lead,silver,and copper)primary explosives to potassiumbased primary explosives.Moreover,the new developed potassium-based potential green primary explosives are compared with the existing traditional primary explosives and the results show that these newly developed explosives can be implemented in real applications.

    1.1.Heavy-metal-based well-known primary explosives

    Fig.1.Schematic representation of the detonation test setup.

    Initially,primary explosives were composed of high-density material with moderate explosive properties and high sensitivities[8].In the 19th century,mercury fulminate(MF)1 was extensively used as a primary explosive.The preparation of MF(from elemental mercury,ethanol,and nitric acid)is quite easy,but the high cost and toxic nature of mercury are major drawbacks[9].Mercury and its compounds are extremely harmful to biological systems,particularly warm-blooded animals.Mercury cations can easily form complexes with a variety of proteins.As a result,activities of many enzymes are inhibited,and several important metabolic processes are disrupted[10].Mercury compounds have also shown toxic effects on the kidney,nervous system,eye-sight,and vibration of the extremities.Furthermore,MF is highly sensitive and unable to perform under high-pressure loadings[11].Afterward,MF was replaced with well-known primary explosives such as lead azide(LA)2,which is easy to handle.While dextrincoated modified LA is still being used as a primary explosive in blasting caps and detonators[12].

    In 1915,a British patent covered the first practical application of lead styphnate(LS)after several years of LA applications in the field of explosive materials[13].It comes in two types:LS(lead(II)2,4,6-trinitrobenzene-1,3-diolate hydrate)(3)and basic LS(di(lead(II)hydroxide)-2,4,6-trinitrobenzene-1,3-diolate)4(Fig.2).LS is easy to initiate and use in primer applications,but not as effective as LA[14].Basic LS is used to prevent the hydrolytic degradation of LA in detonator blends.The inherent drawbacks of LA include its incompatibility with copper and its alloys(encapsulate the primary explosive formulations),high friction sensitivity,and hydrolytic instability[15].Ingestion or inhalation of lead,a highly toxic heavy metal,can damage several tissues and organs,including bones,heart,kidneys,intestines,renal,and nervous systems[16].Besides health and environmental issues,LA produces highly toxic hydrazoic acid(HN3).At ambient conditions,LA reacts with H2O and CO2to produce HN3and basic lead carbonate.HN3reacts with copper wires and surfaces,thus generating highly sensitive and deadly copper azide(Cu(N3)2).This accidental generation of(Cu(N3)2)is the primary cause of many military accidents[17].

    Silver and copper are more environmentally and toxicologically acceptable than lead.Except in large amounts,it is not usually harmful to humans or other vertebrates[18].The synthesis of silver azide(SA)is straightforward and relatively similar to the synthesis of LA.SA has several advantages,including enhanced explosive performance,chemical stability,and better applicability in microscale detonation devices[19].In addition to the high price and light sensitivity,the main disadvantage of SA is the uncontrolled release of silver into the environment,which is toxic to many freshwater aquatic microorganisms and also poses a threat to the environment[20].

    Fronabarger et al.[21]investigated copper(I)5-nitrotetrazolate(DBX-1)5 as a potential primary explosive because it has more applications and properties than LA,such as thermal stability,and initiability.In existing detonator applications,DBX-1 is used as a“drop-in”replacement for LS[22].DBX-1 is resistant to oxidation compared to LA,so it can work at relatively high temperatures and humidity.DBX-1 synthesis is quite simple and facile,but its transportation and handling are not easy tasks due to its highly sensitive nature toward impact(IS:0.04 J)and friction(FS:0.1 N)[23].It is necessary to state that copper is also toxic to microorganisms and therefore not yet desirable[24].

    1.2.Potassium-based traditional primary explosives

    Fig.2.Heavy-metal-based well-known primary explosives and their impact on environment and human life.

    In the past, potassium 4,6-dinitro-7-hydroxy-7-hydrobenzofurazan-1-oxide(KDNBF)(6)was enlisted as a heavy metal-free green primary explosive,and it is still known as a commercially available LS alternative used in“green”primary explosives[28].KDNBF is a Meisenheimer adduct between potassium hydroxide and 4,6-dinitrobenzofuroxan;it was synthesized through the reaction of 4,6-dinitrobenzofuroxan with potassium bicarbonate.KDNBF cannot be considered a universal alternative to LS due to its lower thermal stability as compared to lead-based compounds.Small structural modification in KDNBF leads to the synthesis of potassium 4,6-dinitro-7-hydroxybenzofuroxan(KDNP)(7),which varies only in the absence of a hydrogen atom,and KDNP is more stable due to the aromaticity restoration in the benzofuroxan ring(Fig.3).The decomposition temperature of KDNP is 285°C,and its properties are comparable to LS,but the major drawback is its high sensitivity[29].

    Up to 2014,several primary explosives were synthesized and reported,heavy metals are being replaced by environment-friendly substituents,but these primaries are still relatively weaker than LA.To fulfill the criterion for green primary explosives,the compound must be free of toxic metals,be safe to synthesize,be easy to handle,be capable of long-term storage,have a stable chemical structure,be insensitive to humidity and light,be thermally stable up to 180°C,have good stability,and have better density with excellent detonation properties[30,31].The latest developments in potassium-based green primary explosives materials since 2014 are covered in this review.A potassium-based primary explosive is a combination of an energetic ligand and environment-friendly potassium metal.Energetic ligands consist of two parts:a backbone,such as aliphatic,cyclic,aromatic,or heterocyclic frameworks,and energetic groups(N2,N3,NF2,N-oxide,NO2,ONO2,NHNO2,C(NO2)2H,C(NO2)3,etc.)that can be covalently bonded to the backbone.In this work,we have selected three reference compounds for comparison purposes(MF,LA,and LS),as shown in Table 1.The review is expected to furnish a summary of the basic methodology for the synthesis of potassium-based green primary explosives.

    Table 1Energetic and physicochemical properties of four well-known primary explosives.

    Fig.3.Two well-known potassium-based traditional primary explosives.

    2.Heavy-metal-free modern primary explosives

    For the development of next-generation green primaries,environmental safety is a key factor.Environment-friendly primary explosives minimize environmental pollution via detonation process as they release green detonation products.For designing primary explosives,sensitivity to detonation and stability are the key factors[32].Furthermore,green primary explosives show many good features over traditional primary explosives such as:(i)high decomposition temperature,(ii)insensitivity to humidity and light,(iii)being free from heavy toxic metals such as mercury,lead,cadmium,antimony,etc.,(iv)can be stored for a long time due to stable structure,(v)they are easy and safe to synthesize[33].As a satisfactory precursor for the development of the next-generation high-performance primary explosives,heterocyclic compounds containing environmental-friendly metal ions have been recommended.Nitrogen-rich,heterocyclic energetic ligands play a key role in improving thermal stability,detonation heat,and density.Additionally,they have nitrogen gas as the main detonation product.

    3.Potassium-based modern primary explosives

    As a substitute for lead-based primary explosives,energetic salts are being prepared by combining heterocyclic-based nitrogen-rich energetic ligands with environmentally friendly potassium metal.Potassium coordinates well with energetic ligands[34].Production of modern higher-performance primaries,oxygen and nitrogenrich compounds,and their potassium-based energetic salts is gaining wide acceptance because of their higher heat of formation and eco-friendly nature[35].In recent years,many potassiumbased energetic materials have been synthesized.The necessary energetic and physicochemical properties of a compound can be obtained by combining an energetic ligand with environmentally friendly potassium metal.A variety of potassium-based primary explosives have been synthesized by using ligand synthesis to develop the potassium salt.

    3.1.Pyrazole

    In the area of energetic materials,azole-based compounds,especially pyrazole,are regarded as promising building blocks.Selecting pyrazole rings as a fundamental component of energetic compounds leads to high density(1.1 g/cm3),good nitrogen content(41.1%),and large enthalpy of formation(177.4 kJ/mol)[36].Further functionalization can be introduced at the three catenated carbon atoms in the pyrazole ring.For ideal energetic materials,polynitro groups containing compounds are one of the attractive family,and dinitromethyl functionalized compounds are superior energetic compounds with excellent energetic and physicochemical properties,such as high energy,positiveOB,and high density[37,38].The nitro derivatives of pyrazole have huge real-world applications in the areas of modern dyes,agrochemicals,pharmaceuticals,condensation monomers,non-linear optics,and energetic materials.The starting material 3-nitro-4-cyanopyrazol was synthesized by a reported method,and the cyano group 3-nitro-4-cyanopyrazole was subjected to reaction with an equimolar ratio of aqueous hydroxylamine to synthesize pyrazole-3-nitro-4-hydroximoylamine.4-chloroximenitropyrazole was synthesized by chlorinating hydrochloric acid and sodium nitrite,and its nitrated product was obtained by using 100%HNO3and TFAA.The nitrated product was further treated by KI in methanol to produce potassium 3-nitro-4-dinitromethyl-2H-pyrazole(8)as a yellow solid with a 31.7% yield(Fig.4)[39].Compound(8)consists of 4-nitropyrazole as the backbone and dinitromethyl as an explosophoric group.The two structures are joined to achieve a balance between sensitivity and explosive properties.Compound(8)possesses better detonation properties(Dc:8132 m/s;Pd:29.5 GPa),high density 2.04 g/cm3,and a reasonable sensitivity to impact(4 J)and friction(36 N),but it decomposes at 171°C(Table 2).The initiating efficiency,specifically the principal parameter,determines the ability of a primary explosive to initiate secondary explosives.The detonation test was carried out by using 60 mg of primary explosive(LA)to detonate the 500 mg of the secondary explosives(RDX)with nonel and the same experimental conditions were used for compound(8)as well.According to the data,the diameter of the lead indentations of(8)and LA was 15 mm and 21 mm,respectively.So,(8)is an interesting potential green primary explosive and it can detonate RDX easily[39].

    Coupled N-heterocyclic moieties and bicyclic compounds are regarded as promising building blocks for enhancing physicochemical and explosive properties[36].Novel bicyclic potentially energetic material based on 4,4′,5,5′-tetranitro-2H,2′H-3,3′-bipyrazole(TNBP)is considered to be a perfect precursor,and it was prepared in the manner reported in the literature[40].To synthesize the N-nitramino-functionalized compound,an effort was made to nitrate the aminated compound(4,4′,5,5′-tetranitro-2H,2′H-[3,3′-bipyrazole]-2,2′-diamine)by using NO2BF4in the presence of CH3CO2K.However,because of the weaker N-NH2bonds in the aminated compound,and even though nitronium tetrafluoroborate is a mild nitrating reagent,only the potassium 4,4′,5,5′-tetranitro-2H-3,3′-bipyrazolate monohydrate(9)was obtained,with a 70%yield.Dipotassium 4,4′,5,5′-tetranitro-3,3′-bipyrazolate(10)was prepared by reacting TNBP with KHCO3,and air-stable salt was readily isolated with a good yield(77%)(Fig.5)[41].Both these monopotassium salt(9)and dipotassium salt(10)may observe their applications in the area of green primaries,particularly for(10)due to its excellent thermal stability(323°C),high density(2.03 g/cm3)and good detonation performance(Table 2).However,no detonation/initiation test was performed in the corresponding article[41].

    Fig.4.Synthesis scheme of compound(8).

    Table 2Energetic and physicochemical properties of compounds(8)to(13).

    Fig.5.Synthesis scheme of compound(9)and(10).

    Tetrazole is a common building block for improving the performance of energetic materials[42].3,4-Dinitro-1H-pyrazol-5-amine(5-ADP)was combined with tetrazole to obtain a novel coupled bicyclic compound that has a low environmental impact while producing a desirable detonation.Combining the highly energetic nitrogen-rich ligand with a non-toxic metal produces sensitive and greener metallic salts that can replace LA.The potassium salt of 3,4-dinitro-1-(1H-tetrazol-5-yl)-1H-pyrazol-5-amine(KANTP)(11)was prepared by C-N coupling of pyrazole-tetrazole bicyclic moiety 3,4-dinitro-1-(1H-tetrazol-5-yl)-1H-pyrazol-5-amine(HANTP).HANTP was obtained by regioselective nucleophilic reaction of 5-ADP at the N1position with cyanogen azide.Treating HANTP with AgNO3led to production of its silver salt,and this was further treated with KCl to obtain KANTP with a 76%yield(Fig.6)[43].Compound(11)has a higher nitrogen content,no toxic metal,a higher decomposition temperature of 253°C,a high positive heat of formation of 630 kJ/mol,good detonation performance(Dc:8380 m/s,Pd:31.4 GPa),and better sensitivities(IS:4 J,FS:144 N)than lead-based primary explosives(Table 2).The comprehensive consideration of physicochemical properties,salt(11)is predicted to be a green primary explosive.While related to initiation ability,no data is found in the relevant article[43].

    Fused heterocyclic compounds are a unique class of π-conjugated systems consisting of two or more rings that share two atoms and the bond between the rings[44].To develop a novel class of energetic materials,combining the explosophoric nitro group with the fused-heterocycle ring is of particular interest[45].Forming energetic salts through the NH-acidic group is a uniquely promising technique for modifying the structure of fused heterocyclic compounds[46].Fused heterocyclic-based energetic salts exhibit enhanced friction and impact stability,and their detonation properties and density are not competitive with a parent molecule.Moreover,the oxygen balance and nitrogen content of the resulting energetic salts are firmly restricted by the parental fused molecule[47].Many multi-function energetic compounds can be prepared by structurally modifying 3,6-dinitropyrazolo-[4,3-c]-pyrazole.DipotassiumN,N"-(3,6-dinitropyrazolo[4,3-c]pyrazole-1,4-diyl)dinitramidate(12)was synthesized with a high yield(93%)by using a versatile N-functionalized strategy and an acid-base reaction(Fig.7).The N-nitramino and N-nitro moieties enhance theOBand density greatly(db:2.11 g/cm3;OB:16.2%).Potassium salt(12)featured good thermal stability(208°C),better density,and a highly sensitive nature towards friction and impact stimuli(IS:2 J,FS:20 N)(Table 2),entitled it a competitive candidate as a green primary explosive.The article does not contain any data relevant to the initiation test[48].

    3.2.Triazole

    Fig.6.Synthesis scheme of KANTP(11).

    Fig.7.Synthesis scheme of compound(12).

    As compared to pyrazole,1,2,4-triazole has a higher density(1.15 g/cm3),higher nitrogen contents(60.8%),and larger enthalpy of formation(192.7 kJ/mol)than pyrazole[36].Oxygen and nitrogen-rich substituted triazole and their potassium-based salts have achieved significant attention because of their environmentally friendly nature and higher heat of formation[49].To produce novel HEDMs,the well-known compound 3-amino-5-nitro-1,2,4-triazole(ANTA)was structurally modified.By introducing various explosophoric groups with a 1,2,4-triazole framework,the primary explosive was obtained,with various improved properties such as better oxygen balance,density,and detonation properties[50].Potassium N-(3-nitro-1-(trinitromethyl)-1H-1,2,4-triazol-5-yl)nitramidate hydrate(13)was prepared with a high yield(97%)through three steps:(i)preparing N-alkyl-functionalized 3-amino-5-nitro-1,2,4-triazole by a reaction of bromoacetone with ANTA under alkaline conditions,(ii)nitrating the N-alkyl-functionalized moiety with mixed acid(conc.H2SO4/fuming HNO3),(iii)forming energetic salt by treating the nitrated product(13a)with a base(Fig.8)[51].Compound(13)is a novel two-dimensional(2D)energetic MOF that was synthesized by combining an oxygen-rich energetic ligand with an environmentally friendly potassium ion.Compound(13),which possesses superior detonation performance(Dc:8739 m/s;Pd:30.90 GPa),higher oxygen contents(46.5%),goodOB(14.8%),and high density(2.00 g/cm3),equivalent to CL-20,and satisfactory sensitivity towards to impact(2 J)and friction(32 N)(Table 2).The higher density is due to two factors:1)strong coordination interactions between ligands and potassium ions,and 2)the“zigzag”stacking of the trinitro-methyl group,which maximizes the use of void space.Its high sensitivity is explained by the extensive O…O closed-shell interactions of the nitramine-and trinitromethyl-based energetic materials.In addition,according to the theoretical evaluation,the detonation products of this nitrogenand oxygen-rich energetic material do not contain heavy-metal residue and also show less amount of toxic gases(NO+CO)[25].The compound(13)is a competitive candidate for green primary energetic materials because of its good detonation performance,high sensitivity,and green detonation products.However,still,this article lacks an initiation test of primary explosives[51].

    3.3.Tetrazole

    Fig.8.Synthesis scheme of compound(13).

    The tetrazole ring exhibits higher nitrogen contents(79.8%),high positive heat of formation(ΔHf)(320 kJ/mol),and greener detonation products such as molecular nitrogen[36].To the production of high-energy-density materials(HEDMs),the backbone of 1-nitraminotetrazoles is considered for particular interest because they possess good oxygen balance and large positive heat of formation[52,53].C-nitraminotetrazoles are typically prepared through acid-based nitrating reagents(100% HNO3)and N-nitramino tetrazoles(usually produced by nitrating the corresponding N-aminotetrazoles with slightly strong nitrating agents i.e.,N2O5and NO2BF4).N-methoxycarbonyl is considered a novel indicatory compound of the following class and the development of the following compounds has been a desirable target in the field of HEDMs due to its exceptional energetic and physicochemical properties.Several attempts at direct nitration have been unsuccessful yet[54].It was synthesized from commercially available reagents dimethylcarbonate and hydrazine monohydrate reacted to give methyl carbazate.Cyanogen azide was treated with methyl carbazate to produce 1,5-diaminotetrazole and further nitrated with N2O5in the presence of acetonitrile.1,5-Diaminotetrazole is considered one of the effective synthetic explosives,but the use is limited due to its high sensitivity and low decomposition temperature.To overcome this drawback,its potassium salt was prepared by decomposition of nitramide in the presence of aqueous KOH to give dipotassium 1,5-dinitramino(tetrazolate)(K2DNAT)(14)as a white solid in high yield 98%(Fig.9)[55].Compound(14)featured high thermal stability(240°C),promising performance values(Dc:1011 m/s;Pd:52.2 GPa),and exhibits ideal behavior for use in primary compositions(replacement of tetrazene).In a detonation test,50 mg of(14)was initiated using a standard pyrotechnical igniter.The shockwave formed by(14)was stronger enough to detonate 500 mg of hexogen(RDX).The test was repeated 50 mg(14)without RDX,only a very little dent in the copper plate was detected[55].

    Till date,a number of valuable potassium containing primary explosives have been synthesized and examined as promising replacements for the ordinarily used lead-based primary explosives[56].Salt formation and detonation properties are significantly improved by the introduction of the nitramino group.There are several steps involved in synthetic procedures may affect the practicability of industrial processes to substitute the commercially available lead-based energetic material[57,58].From the following viewpoints,an easier and shorter synthetic procedure would be preferable.Intellectually separation of symmetrical dipotassium 1,1’-dinitramino-5,5’-bistetrazolate compound into two mononitraminotetrazolate is an easy way to synthesize and exhibits comparable energetic properties to the parental dinitraminotetrazolate molecule.In the past,ammonium and silver salts of 1-(Nnitramino)-5H-tetrazolate and 2-(N-nitramino)-5H-tetrazolate had been synthesized,but these compounds do not get any attention due to limited characterization data,sensitive nature of silver salt,and unacceptable solubility of the ammonium salts[59].Two new isomeric salts potassium 1-(N-nitramino)-5H-tetrazolate(15)and potassium 2-(N-nitramino)-5H-tetrazolate(16)are considered as unique primary explosives and they could be synthesized by simple step through nitrating the 1-amino-5H-tetrazole and 2-amino-5Htetrazole with KOEt(Fig.10)[60].(15)and(16)were obtained in the acceptable yield of 64% and 48% respectively.Both these isomers easily outperform LA in performance parameters such as detonation velocity,the heat of explosion,and gas volume after detonation[4].For determination of the DDT capability,a hot needle(HN)and hot plate(HP)tests were performed.Following the penetration of(15)and(16)with a red-heated needle,a vast detonation occurred,indicating their considerable potential as primary explosives.The HP test is a simple and safe way to see how unconfined samples behave to rapid fast heating.During the HP test,both compounds detonated strongly with a small bending of the plates.By consideration of the HN and HP test,only 5 mg of the(15)or(16)is enough to initiate RDX and PETN reliably[60].Therefore,(15)is considered a lead-free green primary explosive due to its easy synthetic steps(easy availability of starting materials)and better initiation ability(Table 3).

    Dipotassium 1,1′-dinitramino-5,5′-bistetrazolate(K2DNABT)(17)was produced through a safe and delicate procedure by using commercially available material(glyoxal and dimethylcarbonate)in 61% yield(Fig.11)[26].Compound(17)undergoes no decomposition or mass loss when it was subjected to 100°C for 48 h.It owns a high density(2.11 g/cm3),high heat of formation(326 kJ/mol),and impressive detonation properties(Dc:8330 m/s,Pd:31.7 GPa);due to such excellent properties it can replace LA from detonators applications.Additionally,it exhibits good initiation power and faster detonation than traditionally lead-based primary explosives while being more environment-friendly.A flame test and a"hot needle test"confirmed quick detonation of K2DNABT in contact with a flame or a hot metal needle,ultralow MPC of 40 mg could easily ignite the 1 g of RDX successfully[26].By considering their good flowability,500 mg of both compounds((17)and LA)was poured into the steel block and ignited unpressed;the indentation of 1.4 mm and 0.2 mm was observed,respectively.The major drawbacks of(17)are its complex and long synthesis route,low yield 61%,and its highly sensitive nature towards impact and friction(1 J and≤1 N,respectively)(Table 3).The challenging field of energetic materials can help to overcome these drawbacks.

    Dipotassium 5,5′-azobis(1-nitraminotetrazolate)K2ABNAT(18)consists of potassium metal and two tetrazole rings linked by an azo-bond.Azo-linkage is responsible for the high heat of formation(617 kJ/mol).Compound(18)was prepared by the simple and suitable method based on the three steps by using cyanogen azide and methylcarbazate as starting material to produce N-methoxycarbonyl protected 1,5-diaminotetrazole,which was oxidized in 5,5′-azobis(1-ethoxyformam idotetrazole)by using conc.HCl with KMnO4and its further decomposition leads to the synthesis of K2ABNAT(21.2%yield)(Fig.12)[61].Compound(18)displays good oxygen balance,higher nitrogen contents,good thermal stability(189°C),high density(2.11 g/cm3),higher positive heat of formation and excellent energetic performances(Dc:8367 m/s,Pd:31.5 GPa)(Table 3).So that it can outperform the LA and K2DNABT in all critical detonation parameters such as the temperature of detonation,heat of detonation,detonation velocity,gas volume after detonation,and energy of formation.The compound(18)is a green primary explosive with superior initiation power,but no data is found in this article in favor of initiation efficiency,low yield and lack of initiation test are its major drawbacks[61].

    Table 3Energetic and physicochemical properties of compounds(14)to(18).

    3.4.Oxadiazole

    Fig.9.Synthesis scheme of K2DNAT(14).

    Fig.10.Synthesis scheme of compound(15)and(16).

    Fig.11.Synthetic pathway towards K2DNABT(17).

    Fig.12.Synthesis scheme of K2ABNAT(18).

    Energetic compounds based on furazan have relatively enhanced thermal stability,good oxygen balance,high detonation heat,and high density.The combination of nitroamino and furazan[62]is responsible for high density,good thermal stability,good oxygen balance,and high heat of formation;it also confirms the molecule"s ability to pair with potassium metal by salt formulation.Additionally,the introduction of explosophoric groups(-NNO2,-C(NO2)2,1,4,2,5-dioxadiazine,and 1H-tetrazole,etc.)on furazan ring can tune the performance of this kind of material,which is a potential candidate for a novel class of energetic green materials[63]with promising properties to be recruited as environmental-friendly primary explosives.For the synthesis of 3-chlorodinitromethyl-4-nitraminofurazan,3-amino-4-chloroximinofurazan was treated with N2O5(prepared by the distillation of 95%HNO3with P2O5on a 10 g scale)in the presence of chloroform.Following the removal of the nitrogen oxides and solvent under vacuum,this reaction mixture was contacted with a potassium iodide in methanol solution,yielding dipotassium 3-dinitromethyl-4-nitraminofurazan(K2DNMNAF)(19)as a yellow solid(46.3% yield).Dipotassium 3,4-dinitraminofurazan(K2DNAF)(20)was prepared in high yield(91.4%)through metathesis reactions of its corresponding silver salt(20a)with an equimolar ratio of K2SO4and KCl in water(Fig.13).K2DNMNAF(19)and K2DNAF(20)possess high-density and good thermal stabilities(281°C and 291°C,respectively)as compared to LA.Attractive energetic and physicochemical properties of salt(19)include good thermal stabilities(Td:281°C)and better detonation properties(Pd:27.3 GPa,Dc:7759 m/s)(Table 4).These promising properties are responsible for making them competitive applicants for the substitution of lead-based primary explosives[64].

    Dipotassium 3-nitramino-4-tetrazolefurazan(K2NATF)(21)was prepared in moderate yield(60%)by the reaction of its corresponding barium salt(21a)with the equimolar ratio of K2SO4and KCl in water(Fig.14).A well-known compound of nitraminofurazan with potassium was prepared by easy method and this salt exhibits excellent properties and is considered as a green alternative to lead-based primary explosives.K2NATF(21)possesses good thermal stability(311°C)comparable to lead-based primary explosives(Table 4).Despite all these properties,the initiation test was not performed concerning compounds(19)-(21)[64].

    The heat of formation can be improved by the addition of an azo-linkage to the furazan moieties.Furazan has two nitrogenoxygen(N-O)and carbon-nitrogen(C=N)bonds that are responsible for goodOBand better density[53].Sensitivity to detonation and stability are significant aspects in designing of primary explosives.A brilliant choice is a combination of energetic groups(i.e.,NO2,N3,or NHNO2)with a comparatively compact molecule.The trinitromethyl group is not considered an appropriate moiety due to its low decomposition temperatures compared to dinitromethyl groups.These groups are higher energetic candidates with improved thermal stabilities.The combination of dinitromethyl and azofurazan groups with potassium should be suitable for primary explosives[65,66].Potassium 4,4’-bis(dinitromethyl)-3,3’-azofurazanate(22)consists of two furazan rings that are responsible for good oxygen balance and improved density,these rings are connected by an azo-bridge and they can enhance the heat of formation.Compound(22)was obtained in low yield(33.5%)in a three-step method:(1)oxidation by using KMnO4/HCl,(2)diazotization by using NH2OH/HCl/NaNO2as reagents,and(3)nitration followed by KI reduction(Fig.15).Nitrogen-rich energetic MOF(22)is considered as promising primary explosive due to its excellent detonation performance,good oxygen balance,and better thermal stability(229°C)with high impact(2 J)and friction(20 N)sensitivities(Table 4)[32].However,no data is reported in this article regarding the initiation test of compound(22).

    As discussed above,furazan-containing energetic compounds possess high heat of formation and better thermal stabilities than other oxygen-nitrogen bearing moieties.Explosive properties and the density of any energetic compound can be tuned with the introduction of different explosophoric functionalities(CH(NO2)2,-NO2,and-N3)to the furazan ring[67].Azide group(-N3)decreases the thermal stability,whereas-NO2exhibits limited coordination positions.Dinitromethyl group is definitively an excellent choice to achieve balance among coordination sites,thermal stability,and low toxicity.Meanwhile,the carbon in the dinitromethyl functionality can treat with metal hydroxides and alkaline ammonium to produce various energetic compounds via a simple acid-base reaction[68].Additionally,a combination of two dinitromethyl-functionalized furazan moieties via bisnitraminomethylene linkage can enhance the oxygen balance and density.4,4’-Bis(dinitromethyl)-3,3’-bisnitramide-methylene-furazanate (DBMF2-)is a powerful energetic ligand that consists of higher contents of nitrogen and oxygen,and combining of this ligand with low toxic alkali metals may lead to stimulating the development of new primary explosive dipotassium 4,4’-bis(dinitromethyl)-3,3’-bisnitramide-methylene-furazanate K2DBMF(23)(yield 39.6%)(Fig.16).Compound(23)possesses positive OB,high nitrogen and oxygen contents(N+O:70.47%),and theoretically predicated detonation solid is K2CO3[69].Furthermore,compound(23)shows improved detonation performance(Dc:8227 m/s;Pd:32.5 GPa)as compared to LA,but despite all these good properties,it exhibits low synthetic yield and low decomposition temperature(133°C)(Table 4).In the detonation test,90 mg(MPC)of compound(23)was used as an initiator to detonate 450 mg RDX with an electric firing igniter.Its initiation performance was determined by examining the hole caused by an explosion.The experiment indicates that(23)can be treated as primary explosive,showing strong initiating performance comparable to LA.

    Table 4Energetic and physicochemical properties of compounds(19)to(29).

    Fig.13.Synthesis scheme of(19)and(20).

    Fig.14.Synthesis scheme of(21).

    Fig.15.Synthesis scheme of(22).

    Many energetic properties of a molecule can be significantly improved by the introduction of high-energy furazanyl ethers.When bridged oxygen atoms are periodically attached with the furazan rings,it can incredibly improve both the thermal stabilities and densities of the molecules[70].Over the last couple of years,furazanyl ether compounds have been studying extensively due to their promising properties and numerous compounds are reported,i.e.,oxy-bridged bis(1H-tetrazol-5-yl)furazan,3,3’-dinitrodifurazanyl ether,3,3′-bis(nitro-NNO-azoxy)-difurazanyl ether,etc.Furthermore,the introduction of furazanyl ether as a backbone into dinitromethide groups are considered as an efficient way due to its superiority,such as its high oxygen contents,explosive properties,and different mode of co-ordination.Dipotassium 3,4-bis(3-dinitromethylfurazan-4-oxy)furazan(K2BDFOF)(24)was prepared in high yield(88.9%)by simply four steps,including addition,diazotization,nitration,and reduction(Fig.17).Compound(24)is entitled as a greener primary explosive due to its higher density,superior thermostability 221°C,and its impact(1 J)and friction(1 N)sensitivities are comparable to LA and K2DNABT.Additionally,compound(24)shows suitable properties,particularly its non-toxic nature,but it is very sensitive and should be handled with care(Table 4).According to the literature,the most important criteria of a high-initiation-power primary explosive are its detonation velocity V,and its detonation pressure P,but experimentally no detonation test was carried out in favor of compound(24)[71].

    The preparation of dipotassium 3,6-bis(4-nitramino-1,2,5-oxadiazol-3-yl)-1,2,4,5-dioxadiazine(K2BNOD)(25)is carried out in one equivalent of K2CO3with the aqueous solution of(25a)(Fig.18).A tricyclic compound was prepared by the facile route and following compound own excellent properties and it can be suggested as a green alternative of heavy-metal-based primary explosives.K2BNOD(25)displays superior detonation performance(Dc:8150 m/s;Pd:30.1 GPa),but this salt has higher impact and friction sensitivities(1 J and12 N)and no initiation test was performed concerning it(Table 4)[72].

    Fig.16.Synthesis scheme of(23).

    Fig.17.Synthetic pathway towards K2BDFOF(24).

    Fig.18.Synthesis scheme of(25).

    In the synthesis of modern nitrogen-rich explosives,a combination of a nitro or nitramino group with a furoxan and furazan ring in one molecule,is considered a legitimate scheme[73].The preparation of novel energetic materials with better thermal stabilities and their properties depends on furoxan and furazan rings.In the present study,3,4-bis(4-nitro-1,2,5-oxadiazol-3-yl)-1,2,5-furoxan(BNFF,also known as DNTF)was prepared by oxidation of 3,4-bis(4-amino-1,2,5-oxadiazol-3-yl)-1,2,5-furoxan(BAFF)with trifluoroacetic acid and 50%hydrogen peroxide.BNFF exhibits better heat of formation(657 kJ/mol),high decomposition temperature(292°C),and excellent energetic performance.To improve the detonation properties of BAFF,amino groups are replaced by nitro groups.Dipotassium 3,4-bis(4-nitramino-1,2,5-oxadiazol-3-yl)-1,2,5-furoxan(K2BNAFF)(26)was prepared at high yield(90%)through nitration of 3,4-bis(4-amino-1,2,5-oxadiazol-3-yl)-1,2,5-furoxan(BAFF)with 100% HNO3and subsequently treated with KOH(Fig.19)[74].This nitrogen-rich energetic salt(26)is considered a green primary explosive due to its better detonation performance,good thermal stability(245°C),reasonable impact(3 J),and friction(>72 N)sensitivities(Table 4)but no data is reported in this article regarding initiation test.

    Fused heterocyclic nitrogen-rich compounds are a novel and attractive family of high HEDMs.These compounds are interesting due to their conjugated and coplanar structure,which is responsible for the enhancement of thermal stability and heat of formation[74].In the area of energetic materials,only a few fused-heterocyclic compounds are used for the synthesis of unusual and different molecules with long-hindered extension.As a consequence,it is of great interest to consider novel methods for constructing fused cyclic skeletons and their derivatives.To the development of new HEDMs,the introduction of the energetic group(NO2,ONO2,NHNO2,C(NO2)2H,C(NO2)3,etc.)to fused heterocyclic ring is a judicious choice,which would improve the density,upgraded the detonation properties and improve the oxygen balance[75].However,the preparation of a fused compound is still a challenge.A new high energy salt potassium 6-nitro-pyrazolo[3,4-c]furazanate 5-oxide(27),was prepared by unusual intramolecular cyclization reaction,nitration of chlorohydroximoyl and amino groups by using a mixture of 100% nitric acid and trifluoroacetic anhydride followed by reduction with potassium iodide in methanol(Fig.20)[76].This novel synthetic strategy can be widely applied in various fields of science and technology.Compound(27)is a fused heterocyclic ring based primary explosive with a conjugated system and coplanar structure which exhibits high heats of formation(0.76 kJ/g),efficient detonation properties(Dc:7973 m/s;Pd:28.6 GPa),and satisfactory sensitivity towards impact(2 J)and friction(40 N)(Table 4).Low yield(22%),thermal stability below 180°C,and six steps synthesis are its major drawbacks.The initiation test of compound(27)is not carried out yet[76].

    Nitramino-based energetic materials always exhibit high sensitivities to obtain a balance between low sensitivities and highenergy nitramino energetic materials,one well-known strategy is the introduction of nitramino groups into stable nitrogen-rich heterocycles like tetrazine,tetrazole,furazan,and triazole[77].A well-known fused furazan compound,4,8-dihydrodifurazano[3,4-b,e]pyrazine(DFP),contains two furazans in its backbone.Many energetic bonds(C-N,N-O,and C=N)are responsible for the high enthalpy of formation.DFP possesses a high crystal density of 2.01 g/cm3due to its symmetric planar structure,with comparatively higher N/O contents(ca.70 wt%).The following structural properties indicate that DFP is a favorable backbone for designing promising HEDMs[78]:(1)limited synthetic methodology due to only two reaction sites(-NH group);(2)Easy removal of piperazine ring in the DFP molecule and the generation of a free radical.So,the preparation of novel DFP-based energetic compounds remains a challenge.In the area of energetic materials,energetic metalorganic frameworks(E-MOFs)have been pursued because their sensitivities and energy levels can be controlled by explosive ligands and assembly of reasonable metal ions[79].In the work below,3D E-MOF was prepared by using nitroamine furazans ligand and potassium ions as the metal center.This energetic ligand consists of two furazan rings with many energetic bonds,such as C-N,N-O,and C=N,which are responsible for the enhanced energy of the final 3D E-MOF.Dipotassium 4,8-dinitraminodifurazano[3,4-b,e]-Pyrazine(28)was synthesized from potassium ions and energetic ligands,which are attached via 6,8-connection mode to form a 3D framework with pcu topology(yield 30.2%)(Fig.21)[80].Compound(28)has better thermal stability(292°C),excellent detonation velocity(9660 m/s),and reasonable friction and impact sensitivities(1 N and 2 J,respectively)(Table 4).Better thermal stability and excellent detonation performance associated with reasonable mechanical sensitivities are responsible for making(28)as a potential candidate for primary explosives.Despite these excellent properties the compound(28)still has not gone through the initiation test.

    Fig.20.Synthesis scheme of(27).

    Fig.21.Synthesis scheme of(28).

    Recently,many satisfactory substitutes for lead-based primary explosives have been reported,but few of them possess good oxygen balance.By turning all carbon into carbon dioxide and all hydrogen into water,energetic compounds with a positive or zero oxygen balance(OB)releases small number of toxic gases.Consequently,compounds with a positiveOBare considered greener than negativeOBcompounds[81].The majority of candidates synthesized as primary green explosives having negativeOB.Nitro groups could be introduced in a compound to improve theOBefficiently.Dipotassium 4,5-bis(dinitromethyl)furoxanate(29)was obtained in 30.2% yield by nitrating the starting material(with a mixture of 100% HNO3and trifluoroacetic acid anhydride)followed by potassium-iodide reduction(Fig.22)[82].Compound(29)consist of dinitromethyl groups and it is responsible for improved oxygen balance,enhanced detonation properties,and good density.Additionally,the planarity of this group makes(29)more stable as compared to trinitromethyl-containing molecules.Due to the positive oxygen balance,it liberates the minimum amount of toxic products.N2,CO2,and H2O are the theoretically calculated main detonation products.Compound(29)is a reasonable candidate as a greener primary explosive due to reasonable sensitivity,remarkable detonation performance,improved decomposition temperature(218°C)(Table 4),and theoretically calculated green detonation products(CO%+NO%=0.29%)[82].Initiating efficiency of compound(29)has not been evaluated yet through a detonation test.In Table 5 oxygen balance(ΩCO% and ΩCO2%)of the different compounds(K2DNABT,K2BDFOF,and K2DNAT)are reported and drawn a comparison with(29).

    Table 5Oxygen balance of some potassium-based primary explosives.

    These(8)-(29)newly synthesized primary explosives are considered to be“greener”energetic materials than the traditional materials.This type of greenness is limited to a single property,free from heavy metal pollution in the environment,which is either directly or indirectly hazardous to living organisms.However,it is a misconception that a green primary explosive should have numerous green attributes,such as low toxicity and biodegradability[83].

    4.Conclusions and future trends

    Heavy-metal-based primary explosives(MF,LA,and LS)were ruled in the area of primaries for a very old time.Long-term exposure to these heavy metals causes many health effects,environmental contamination,and the threat from higher sensitivities,so it is necessary to find efficient and green substitutes.Given thesafety of production and transportation,sensitivity to external stimuli is a critical component.

    The synthesis process and energetic features of numerous potassium-based primary explosives,as well as their currently accessible practical possibilities,are covered in this paper.Many potassium-based primaries were reported in the past,but these compounds are seldom used because of their complex synthesis and in terms of priming capability and initiating ability,they are comparatively weaker than heavy-metals-based primary explosives.In recent years(since 2014),many potassium-based primary explosives(8)-(29)have been synthesized.As compared to traditional primary explosives,these compounds were prepared from easily available and cheap material.They are thermally very stable except(13),(16),(23),and(27),whereas(8),(13),(19),(20),(28)and(29),own good oxygen balance.The compounds’sensitivities((8)-(13),(19)-(23),(25)-(27),and(29))are better than traditional primary explosives,but they are still quite sensitive,and higher sensitivities cause a premature or accidental explosions.Additionally,there exist complex synthesis processes and a low yield,which appears to limit future research.Only compounds(8),(14),(15),(16),(17),(23),and(24)go through an initiation test,which are possibly the most important criteria for primary explosives.

    Fig.22.Synthesis scheme of(29).

    Three stages may be required to obtain a green primary explosive with the desired attributes in a more acceptable manner.The first step is to choose greener cations and anions that will ensure the required properties of the target material.The second step is estimating attributes for the energetic salts chosen and selecting the most promising compounds as potential targets for further synthesis.Third,green primaries should next be synthesized via shorter,safer,and cost-effective routes,and their physical properties,detonation performance,and initiating ability should all be studied.

    From the ongoing research,it is clearly indicated that appreciable efforts have been devoted over the past several years for the replacement of toxic metals from primary explosives.Many publications on potassium-based primary explosives exist,indicating that this is a fascinating field that merits more investigation because it is crucial to the safe production of primary explosives with discriminatory features.

    5.Cautions

    It is to remind the readers that this review is about the current progress of potassium-based(they are the combination of various energetic ligands with potassium metal)and metal-free green primary explosives.Many of the compounds included in this review are very energetic and more sensitive,they have the probability to explode under certain conditions.Therefore,the proper protective measures such as the use of leather gloves,fume hoods,face shields,and careful handling are highly recommended throughout the preparation of targeted compounds.Moreover,the original references should be referred for detailed synthesis method and safety information.

    Declaration of competing interest

    The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

    Acknowledgments

    We are thankful to the NSAF(U1830134),NSFC(22175025),for their generous financial support.This job was supported by a project of State Key Laboratory of Explosion Science and Technology(Beijing Institute of Technology).The project number is YBKT21-02.

    黄色一级大片看看| 久久久久久久久久成人| 简卡轻食公司| 亚洲aⅴ乱码一区二区在线播放| 精华霜和精华液先用哪个| 国产精品免费一区二区三区在线| 国产成人福利小说| 丝袜美腿在线中文| 免费看av在线观看网站| 色av中文字幕| av在线亚洲专区| 变态另类成人亚洲欧美熟女| 欧美日韩精品成人综合77777| 在线免费观看的www视频| 我要看日韩黄色一级片| 午夜激情欧美在线| 国产伦精品一区二区三区四那| 小说图片视频综合网站| 久久久久久久久大av| 嫩草影院新地址| bbb黄色大片| 国产又黄又爽又无遮挡在线| 久久香蕉精品热| 2021天堂中文幕一二区在线观| 日韩欧美国产一区二区入口| 亚洲精品国产成人久久av| 色播亚洲综合网| 人妻少妇偷人精品九色| 国产av麻豆久久久久久久| 熟女电影av网| 九九久久精品国产亚洲av麻豆| 欧美性感艳星| 国产亚洲欧美98| 窝窝影院91人妻| 熟女电影av网| 99热网站在线观看| 亚洲精品粉嫩美女一区| 国产亚洲91精品色在线| 色哟哟·www| 久久久精品欧美日韩精品| 免费av毛片视频| 日韩中字成人| 国产精品无大码| 国产高清视频在线播放一区| 不卡一级毛片| 国产熟女欧美一区二区| 中文亚洲av片在线观看爽| 一个人看的www免费观看视频| 天天一区二区日本电影三级| 人妻制服诱惑在线中文字幕| 婷婷亚洲欧美| 99久久九九国产精品国产免费| 天天一区二区日本电影三级| 人人妻人人看人人澡| 女同久久另类99精品国产91| 五月伊人婷婷丁香| 亚洲av一区综合| 免费在线观看成人毛片| 国产亚洲精品综合一区在线观看| av中文乱码字幕在线| 国产成人福利小说| 日本撒尿小便嘘嘘汇集6| 国产av麻豆久久久久久久| 国产精品一区二区性色av| 99久久中文字幕三级久久日本| 免费搜索国产男女视频| 日本三级黄在线观看| 色5月婷婷丁香| 22中文网久久字幕| 欧美精品国产亚洲| 国产成人aa在线观看| 成人综合一区亚洲| 亚洲专区中文字幕在线| 久久久精品欧美日韩精品| 99热6这里只有精品| 窝窝影院91人妻| 国产女主播在线喷水免费视频网站 | 日本黄色片子视频| 欧美激情国产日韩精品一区| 国产一区二区三区av在线 | 久久精品国产清高在天天线| 久久久久国内视频| 天堂影院成人在线观看| 亚洲av五月六月丁香网| 91午夜精品亚洲一区二区三区 | 成人二区视频| videossex国产| 毛片一级片免费看久久久久 | av视频在线观看入口| 色播亚洲综合网| 麻豆国产av国片精品| 欧美绝顶高潮抽搐喷水| 老司机深夜福利视频在线观看| 国产伦在线观看视频一区| 日本熟妇午夜| 999久久久精品免费观看国产| 波多野结衣高清无吗| 嫩草影视91久久| 欧美xxxx性猛交bbbb| 99在线视频只有这里精品首页| 精品欧美国产一区二区三| 亚洲欧美日韩高清专用| 国产成人影院久久av| 人妻少妇偷人精品九色| 一级av片app| 女的被弄到高潮叫床怎么办 | 欧美+亚洲+日韩+国产| 久久精品人妻少妇| 亚洲成人久久性| 97碰自拍视频| 日韩欧美一区二区三区在线观看| 九色成人免费人妻av| 亚洲精品久久国产高清桃花| 97热精品久久久久久| 亚洲图色成人| .国产精品久久| 国产精品久久久久久精品电影| videossex国产| 国产精品一区二区免费欧美| 99国产极品粉嫩在线观看| 欧美一区二区亚洲| 99热这里只有精品一区| 一个人看的www免费观看视频| 精品一区二区免费观看| 精品久久久久久久末码| 99久久成人亚洲精品观看| 九九在线视频观看精品| 丰满人妻一区二区三区视频av| 欧美日韩乱码在线| 国内久久婷婷六月综合欲色啪| 成人国产综合亚洲| 丰满的人妻完整版| 国产麻豆成人av免费视频| 国产午夜精品论理片| 午夜福利欧美成人| 国产亚洲av嫩草精品影院| 天堂网av新在线| 日韩人妻高清精品专区| 搡老妇女老女人老熟妇| 十八禁国产超污无遮挡网站| 老熟妇仑乱视频hdxx| 丰满乱子伦码专区| 干丝袜人妻中文字幕| 亚洲性久久影院| 波野结衣二区三区在线| 日韩在线高清观看一区二区三区 | 欧美色欧美亚洲另类二区| 国产成人福利小说| 男女下面进入的视频免费午夜| 国产高潮美女av| 免费av不卡在线播放| 搡老熟女国产l中国老女人| 日韩大尺度精品在线看网址| 精品日产1卡2卡| 午夜激情福利司机影院| 国内精品宾馆在线| 一区二区三区四区激情视频 | 联通29元200g的流量卡| 亚洲人成网站在线播放欧美日韩| 村上凉子中文字幕在线| 99久久无色码亚洲精品果冻| 日韩大尺度精品在线看网址| 国产 一区精品| 色精品久久人妻99蜜桃| 美女被艹到高潮喷水动态| 免费看a级黄色片| 99国产精品一区二区蜜桃av| 黄色欧美视频在线观看| 精品久久久久久,| 69av精品久久久久久| 高清在线国产一区| 欧美又色又爽又黄视频| 一边摸一边抽搐一进一小说| 18+在线观看网站| 少妇人妻一区二区三区视频| 男插女下体视频免费在线播放| 欧美一级a爱片免费观看看| 久久久久久九九精品二区国产| 嫩草影院精品99| 成人亚洲精品av一区二区| 国产午夜福利久久久久久| 国产精品爽爽va在线观看网站| 国产v大片淫在线免费观看| 亚洲色图av天堂| 国产精品,欧美在线| 久久午夜亚洲精品久久| 搞女人的毛片| 99久久精品热视频| 可以在线观看的亚洲视频| 国产亚洲精品av在线| 日韩精品有码人妻一区| 乱系列少妇在线播放| 韩国av一区二区三区四区| 精品人妻视频免费看| 欧美成人一区二区免费高清观看| 精品一区二区三区av网在线观看| 午夜福利高清视频| 啪啪无遮挡十八禁网站| 精品久久久久久久人妻蜜臀av| 国产精品无大码| 日本 欧美在线| 精品一区二区三区av网在线观看| 美女大奶头视频| 最后的刺客免费高清国语| 99精品在免费线老司机午夜| 3wmmmm亚洲av在线观看| 热99re8久久精品国产| 日韩国内少妇激情av| 久久久成人免费电影| 熟女人妻精品中文字幕| 伊人久久精品亚洲午夜| 哪里可以看免费的av片| 亚洲精品日韩av片在线观看| 色综合站精品国产| 最近最新中文字幕大全电影3| 久久久久久九九精品二区国产| 最近中文字幕高清免费大全6 | 少妇人妻一区二区三区视频| 简卡轻食公司| 亚洲经典国产精华液单| 日韩强制内射视频| 韩国av在线不卡| 日韩一区二区视频免费看| 免费看a级黄色片| 在线观看午夜福利视频| 韩国av一区二区三区四区| 中文字幕av成人在线电影| 女生性感内裤真人,穿戴方法视频| 久久草成人影院| 亚洲国产日韩欧美精品在线观看| 成人国产麻豆网| 国产真实乱freesex| 日韩国内少妇激情av| 欧美精品国产亚洲| 久久久久久久久久久丰满 | 18禁裸乳无遮挡免费网站照片| 亚洲精华国产精华液的使用体验 | av.在线天堂| 国产精品精品国产色婷婷| 黄色丝袜av网址大全| 国产女主播在线喷水免费视频网站 | 91久久精品国产一区二区三区| 欧美另类亚洲清纯唯美| 午夜免费成人在线视频| 99精品久久久久人妻精品| 欧美日韩瑟瑟在线播放| 亚洲最大成人av| 久久久久精品国产欧美久久久| 日本五十路高清| 18禁裸乳无遮挡免费网站照片| 国产伦一二天堂av在线观看| 变态另类丝袜制服| 国产 一区 欧美 日韩| 日本与韩国留学比较| 亚洲va在线va天堂va国产| 欧美日本视频| 丰满乱子伦码专区| 国产探花在线观看一区二区| 亚洲综合色惰| 亚洲av不卡在线观看| 日韩欧美 国产精品| 一区二区三区四区激情视频 | 老师上课跳d突然被开到最大视频| 日韩欧美 国产精品| 色精品久久人妻99蜜桃| 成人高潮视频无遮挡免费网站| 国产高清视频在线观看网站| 欧美色欧美亚洲另类二区| 日日摸夜夜添夜夜添小说| 国产熟女欧美一区二区| 亚洲无线在线观看| 亚洲男人的天堂狠狠| 12—13女人毛片做爰片一| 哪里可以看免费的av片| 精品欧美国产一区二区三| 欧美日本视频| 最新中文字幕久久久久| 日韩亚洲欧美综合| 亚洲,欧美,日韩| 久久人人精品亚洲av| 精品免费久久久久久久清纯| 尤物成人国产欧美一区二区三区| 国产视频一区二区在线看| 日韩精品有码人妻一区| 日韩亚洲欧美综合| 中文字幕av在线有码专区| 搡老岳熟女国产| 亚洲四区av| 国产伦一二天堂av在线观看| 深夜a级毛片| 久久6这里有精品| 国产成人a区在线观看| 身体一侧抽搐| 我要看日韩黄色一级片| 日本三级黄在线观看| 欧美三级亚洲精品| 精品久久久久久久久av| 很黄的视频免费| 成人高潮视频无遮挡免费网站| 亚州av有码| bbb黄色大片| 午夜视频国产福利| 嫩草影视91久久| 国产黄色小视频在线观看| 欧美另类亚洲清纯唯美| 久久精品91蜜桃| 亚洲内射少妇av| 午夜免费激情av| 日日夜夜操网爽| 国内少妇人妻偷人精品xxx网站| av在线天堂中文字幕| 老司机福利观看| 国产精品久久久久久久电影| 琪琪午夜伦伦电影理论片6080| 蜜桃亚洲精品一区二区三区| 一个人看的www免费观看视频| 国产精品一区二区三区四区久久| 午夜激情欧美在线| 国产探花极品一区二区| 日日撸夜夜添| 蜜桃久久精品国产亚洲av| 亚洲真实伦在线观看| 精品欧美国产一区二区三| 一级黄色大片毛片| 天天躁日日操中文字幕| 精品福利观看| 亚洲aⅴ乱码一区二区在线播放| 日日夜夜操网爽| 亚州av有码| av黄色大香蕉| 丰满的人妻完整版| 精品人妻一区二区三区麻豆 | 少妇熟女aⅴ在线视频| 免费av毛片视频| 欧美色视频一区免费| 色综合婷婷激情| 一a级毛片在线观看| 亚洲欧美清纯卡通| 久久久久免费精品人妻一区二区| 国产蜜桃级精品一区二区三区| 精品欧美国产一区二区三| 99久久精品一区二区三区| av福利片在线观看| 国产蜜桃级精品一区二区三区| 免费大片18禁| 午夜激情福利司机影院| 亚洲欧美日韩高清在线视频| 成人特级黄色片久久久久久久| 国产91精品成人一区二区三区| 夜夜爽天天搞| 99久国产av精品| 国产午夜精品论理片| 欧美三级亚洲精品| av黄色大香蕉| 欧美+亚洲+日韩+国产| 亚洲黑人精品在线| 人妻丰满熟妇av一区二区三区| av在线观看视频网站免费| 日韩高清综合在线| 久久久久免费精品人妻一区二区| 亚洲综合色惰| 两人在一起打扑克的视频| 全区人妻精品视频| 91久久精品国产一区二区三区| 久久精品国产亚洲av天美| 成人毛片a级毛片在线播放| 一区二区三区四区激情视频 | xxxwww97欧美| 亚洲av中文av极速乱 | 一级a爱片免费观看的视频| 精品无人区乱码1区二区| 22中文网久久字幕| 三级毛片av免费| 一进一出抽搐gif免费好疼| 麻豆成人午夜福利视频| 欧美一区二区精品小视频在线| 真人一进一出gif抽搐免费| 日本黄大片高清| 毛片女人毛片| 欧美一区二区精品小视频在线| 人妻少妇偷人精品九色| 久久久午夜欧美精品| 三级毛片av免费| 欧美又色又爽又黄视频| 成年免费大片在线观看| 成人三级黄色视频| 中文字幕免费在线视频6| 日韩中字成人| 久久久久精品国产欧美久久久| 亚洲av.av天堂| 久久久久精品国产欧美久久久| 久久久久久久久大av| 国产aⅴ精品一区二区三区波| 99热网站在线观看| 十八禁国产超污无遮挡网站| 国产黄a三级三级三级人| 免费人成在线观看视频色| 天堂√8在线中文| 中文字幕久久专区| 91麻豆精品激情在线观看国产| 午夜福利成人在线免费观看| 波多野结衣高清无吗| 日韩人妻高清精品专区| 亚洲av一区综合| 免费观看精品视频网站| 97超视频在线观看视频| 婷婷丁香在线五月| 日本五十路高清| 三级毛片av免费| 网址你懂的国产日韩在线| 国产黄a三级三级三级人| 夜夜夜夜夜久久久久| av.在线天堂| 免费观看人在逋| 一本精品99久久精品77| 深夜a级毛片| 精品人妻熟女av久视频| 中文亚洲av片在线观看爽| 一夜夜www| 久久久久久久久中文| 五月玫瑰六月丁香| 亚洲av不卡在线观看| av中文乱码字幕在线| 久久国内精品自在自线图片| 伦理电影大哥的女人| 制服丝袜大香蕉在线| 大又大粗又爽又黄少妇毛片口| 搡女人真爽免费视频火全软件 | 亚洲精品国产成人久久av| 国产色爽女视频免费观看| 久久精品国产自在天天线| 99热这里只有精品一区| 99热只有精品国产| a级一级毛片免费在线观看| 亚洲无线在线观看| 熟妇人妻久久中文字幕3abv| 免费搜索国产男女视频| 全区人妻精品视频| 午夜激情福利司机影院| 午夜福利欧美成人| 国产在线精品亚洲第一网站| 淫秽高清视频在线观看| 国产精品国产高清国产av| 99riav亚洲国产免费| 99久久久亚洲精品蜜臀av| 少妇人妻精品综合一区二区 | 国产精品一区二区三区四区免费观看 | 亚洲av熟女| 婷婷精品国产亚洲av| 午夜精品在线福利| 日韩精品青青久久久久久| 两人在一起打扑克的视频| 男人舔女人下体高潮全视频| 精品一区二区三区av网在线观看| 国产一区二区三区在线臀色熟女| 欧美成人一区二区免费高清观看| 18禁黄网站禁片午夜丰满| 国产乱人视频| 免费看日本二区| 草草在线视频免费看| 最近最新中文字幕大全电影3| 国产精品三级大全| 日本熟妇午夜| 国产亚洲精品久久久com| 国产爱豆传媒在线观看| 国产69精品久久久久777片| 亚洲美女视频黄频| 九色国产91popny在线| 国产精品日韩av在线免费观看| 欧美日本视频| 欧美xxxx黑人xx丫x性爽| 亚洲第一区二区三区不卡| 国产中年淑女户外野战色| 亚洲精品日韩av片在线观看| 国产 一区 欧美 日韩| 久久久久久久午夜电影| 色5月婷婷丁香| 中亚洲国语对白在线视频| 999久久久精品免费观看国产| 很黄的视频免费| 亚洲精品日韩av片在线观看| 九色国产91popny在线| 亚洲精品国产成人久久av| 少妇熟女aⅴ在线视频| 高清毛片免费观看视频网站| 亚洲专区中文字幕在线| 国产v大片淫在线免费观看| www.色视频.com| 中文字幕久久专区| 精品免费久久久久久久清纯| 看十八女毛片水多多多| 少妇猛男粗大的猛烈进出视频 | 真人一进一出gif抽搐免费| 日韩欧美国产一区二区入口| 亚洲男人的天堂狠狠| 十八禁网站免费在线| 午夜日韩欧美国产| 一个人观看的视频www高清免费观看| 欧美区成人在线视频| 三级毛片av免费| 在线观看一区二区三区| 日日夜夜操网爽| 69人妻影院| 老熟妇乱子伦视频在线观看| 成人性生交大片免费视频hd| 91av网一区二区| 亚洲人成网站高清观看| 我要搜黄色片| 免费观看在线日韩| 欧美丝袜亚洲另类 | 中文在线观看免费www的网站| 亚洲无线在线观看| 深夜精品福利| 国产午夜精品论理片| 午夜老司机福利剧场| 亚洲专区中文字幕在线| 九九爱精品视频在线观看| 亚洲国产欧洲综合997久久,| 日韩国内少妇激情av| 久久九九热精品免费| 亚洲美女黄片视频| 日本一本二区三区精品| 观看美女的网站| 亚洲第一区二区三区不卡| 成年免费大片在线观看| 免费不卡的大黄色大毛片视频在线观看 | 久久精品国产亚洲av涩爱 | 亚洲五月天丁香| 日韩一本色道免费dvd| 精品日产1卡2卡| 国产欧美日韩精品亚洲av| 欧美人与善性xxx| 午夜老司机福利剧场| 人人妻,人人澡人人爽秒播| 欧美高清性xxxxhd video| 久久精品影院6| 亚洲国产精品合色在线| 午夜爱爱视频在线播放| 午夜福利欧美成人| 免费一级毛片在线播放高清视频| 成人午夜高清在线视频| 午夜福利高清视频| 久久精品国产亚洲av天美| 九九热线精品视视频播放| 免费无遮挡裸体视频| 简卡轻食公司| 久久精品国产亚洲av香蕉五月| 少妇的逼水好多| videossex国产| av中文乱码字幕在线| 老师上课跳d突然被开到最大视频| 黄色视频,在线免费观看| 亚洲成人免费电影在线观看| 夜夜夜夜夜久久久久| 日韩欧美三级三区| 亚洲va日本ⅴa欧美va伊人久久| 给我免费播放毛片高清在线观看| 一级a爱片免费观看的视频| 免费观看精品视频网站| 啪啪无遮挡十八禁网站| 波多野结衣高清无吗| 国产大屁股一区二区在线视频| or卡值多少钱| 成人特级黄色片久久久久久久| 又爽又黄无遮挡网站| 国产欧美日韩精品亚洲av| 99久久九九国产精品国产免费| av女优亚洲男人天堂| 精品久久久久久久久亚洲 | 99国产精品一区二区蜜桃av| 亚洲 国产 在线| 天堂影院成人在线观看| 哪里可以看免费的av片| 亚洲av二区三区四区| 97超级碰碰碰精品色视频在线观看| 91麻豆精品激情在线观看国产| 欧美+日韩+精品| 亚洲四区av| 在线观看一区二区三区| 国产精品人妻久久久久久| 亚洲精品久久国产高清桃花| 国产一区二区三区av在线 | 国产又黄又爽又无遮挡在线| 欧美性感艳星| 免费在线观看影片大全网站| 一卡2卡三卡四卡精品乱码亚洲| 亚洲无线在线观看| 一区二区三区激情视频| 免费看av在线观看网站| 波多野结衣高清作品| h日本视频在线播放| 久久99热6这里只有精品| 波多野结衣高清作品| 免费无遮挡裸体视频| 欧美色欧美亚洲另类二区| 久久久久久久久久黄片| 尾随美女入室| 日本 欧美在线| 亚洲真实伦在线观看| 人妻丰满熟妇av一区二区三区| 毛片一级片免费看久久久久 | 国产成人aa在线观看| 高清日韩中文字幕在线| 成人高潮视频无遮挡免费网站| 三级毛片av免费| 国产成年人精品一区二区| 看十八女毛片水多多多| 成年免费大片在线观看| 亚洲精品粉嫩美女一区| 99视频精品全部免费 在线| 精品午夜福利视频在线观看一区| 久久人人爽人人爽人人片va| 国产精品不卡视频一区二区| 亚洲欧美清纯卡通| 一区福利在线观看|