• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    All-Climate Aluminum-Ion Batteries Based on Binder-Free MOF-Derived FeS2@C/CNT Cathode

    2021-09-03 08:19:34YuxiangHuHongjiaoHuangDeshuangYuXinyiWangLinlinLiHanHuXiaoboZhuShengjiePengLianzhouWang
    Nano-Micro Letters 2021年10期

    Yuxiang Hu, Hongjiao Huang, Deshuang Yu, Xinyi Wang, Linlin Li, Han Hu,Xiaobo Zhu, Shengjie Peng?, Lianzhou Wang?

    ABSTRACT Aluminum-ion batteries (AIBs) are promising next-generation batteries systems because of their features of low cost and abundant aluminum resource. However, the inferior rate capacity and poor all-climate performance,especially the decayed capacity under low temperature, are still critical challenges toward high-specific-capacity AIBs. Herein, we report a binder-free and freestanding metal-organic framework-derived FeS2@C/carbon nanotube(FeS2@C/CNT) as a novel all-climate cathode in AIBs working under a wide temperature window between ?25 and 50 °C with exceptional flexibility. The resultant cathode not only drastically suppresses the side reaction and volumetric expansion with high capacity and long-term stability but also greatly enhances the kinetic process in AIBs with remarkable rate capacity (above 151 mAh g?1 at 2 A g?1) at room temperature. More importantly, to break the bottleneck of the inherently low capacity in graphitic material-based all-climate AIBs, the new hierarchical conductive composite FeS2@C/CNT highly promotes the all-climate performance and delivers as high as 117 mAh g?1 capacity even under ?25 °C. The well-designed metal sulfide electrode with remarkable performance paves a new way toward all-climate and flexible AIBs.

    KEYWORDS Aluminum-ion battery; All-climate battery; Iron sulfide; Binder-free; High rate capacity

    1 Introduction

    Rechargeable aluminum-ion batteries (AIBs) are promising next-generation batteries with merits of the most abundant metal resource on the earth crust, low cost, inherently safe handling, and the highest volumetric capacity (8.04vs.2.06 Ah cm?3of lithium) [1, 2]. Previously, the intrinsic hydrogenation over the Al anode and passive oxide layer formation in the aqueous system drastically reduced the battery voltage and efficiency [3-8]; then, ionic liquid (IL) electrolytes were proposed to avoid these issues in the 2010s [1, 2,9]. Since then, various cathodes have been proposed in ILbased AIBs including graphite-based materials, metal oxide/sulfide/selenium, MXene, and polymer-based materials to further improve the non-aqueous AIBs [10-15]. Yet, the ILbased AIBs still encountered several critical issues in terms of electrode material disintegration, short-term stability, and poor rate capacity (e.g., most metal sulfide cathodes have low rate capacity) toward practical applications [16, 17].Therefore, it is highly desirable to construct new structured electrode materials with high capacity, long-term stability,and enhanced rate capability in the rechargeable AIBs.

    Moreover, although the newly developed ILs have wide operating temperature window (e.g., from ?50 to 80 °C), the development of the all-climate AIBs is severely hindered due to their inherently low capacity [18]. The emerging highcapacity metal sulfide electrodes are promising all-climate candidates, while their low ion/electron conductivity and inferior cycling stability need to be further optimized for all-climate AIBs [18-23]. FeS2, a earth-abundant (pyrite)and low-cost mineral with high theoretical capacity and favorable ion/electron conductivity, is a commercial cathode material in all-climate, especially under low temperatures,lithium batteries (such as Energizer L91) [24-28]. We were inspired to explore the use of FeS2as an all-climate electrode in AIBs, which has not yet been reported.

    Herein, we propose the design of a self-standing and binder-free carbon nanotube (CNT) wrapped metal-organic framework (MOF)-derived carbon-coated FeS2(FeS2@C/CNT) as the high-capacity all-climate metal sulfide cathode in AIBs with exceptional flexibility. The binder-free and self-standing yolk-shell structure efficiently eliminates the side reaction between binder/current collector with IL electrolyte and tolerates volume expansion with robust cycling performance (above 80 mAh g?1after 2,000 cycles at 1 A g?1). The density functional theory (DFT) simulation also verifies that the well-designedN-doped carbon shell not only restricts FeS2pulverization but also facilitates the kinetic process of active ion toward FeS2@C/CNT, which is highly beneficial to the capacity/rate capacity (286 mAh g?1at 100 mA g?1and even 151 mAh g?1at 2 A g?1). Moreover, the high conductive carbon matrix and porous structure significantly improve the electron/ion diffusion pathway and electrolyte infiltration with outstanding all-climate performance (?25 to 50 °C), which contribute to enhanced capacity retention (above 117 mAh g?1) and rate capacity even at a low temperature of ?25 °C. The novel design of this FeS2@C/CNT paves the potential strategy toward highperformance all-climate and flexible AIBs.

    2 Experimental Section

    2.1 Chemicals

    All chemicals were of analytical grade and used directly without further purification. Polyvinylpyrrolidone (PVP,K30), potassium ferricyanide (K3[Fe(CN)6]), hydrochloric acid (HCl, 36.0% ~ 38.0%), and dopamine hydrochloride were purchased from Sigma-Aldrich. Single-walled carbon nanotube (CNT, P3, > 90% purity) was obtained from carbon solution, Inc. All the reagents were used without further purification.

    2.2 Material Preparation

    2.2.1 Yolk-shell Fe-MOF Spheres

    PVP (3.00 g) and K3[Fe(CN)6]·3H2O (132 mg) were added to a 0.01 M HCl solution (40.0 mL) under magnetic stirring. After 30 min of stirring, a clear solution was obtained.The vial was then placed into an electric oven and heated at 80 °C for 24 h. After aging, the precipitates were collected by centrifugation and washed several times in distilled water and ethanol. After drying at room temperature for 12 h, Fe-MOF spheres were obtained. To obtain a yolk-shell structure, Fe-MOF (50 mg) and PVP (100 mg) were added to a 2.0 M HCl solution (30 mL) in a Teflon vessel under magnetic stirring. After 1 h, the vessel was transferred into a stainless autoclave and heated at 140 °C for 4 h. The etching time of 2 and 6 h were also conducted for comparison. After being cooled to room temperature, the precipitate was collected by centrifugation, then washed with deionized water and ethanol several times, and finally dried at 60 °C. Finally,yolk-shell Fe-MOF was obtained.

    2.2.2 Yolk-shell FeS2@C Spheres

    First, 50 mg of yolk-shell Fe-MOF nanocubes and 25 mg of dopamine (DPA) were dispersed into a Tris-buffer solution(80 mL, 10 mM) with magnetic stirring for 3 h. The resultant product was collected via centrifugation and washed three times with deionized water and ethanol, respectively, and dried at 60 °C overnight. Then, the DPA-coated Fe-MOF(Fe-MOF@DPA) and sulfur powder were put at two separate positions in a porcelain boat with sulfur powder at the upstream side of the furnace. The weight ratio of Fe-MOF@DPA to sulfur is 1:5. After flushed with Ar, the center of the furnace was elevated to 500 °C at a ramping rate of 2 °C min?1, held at this temperature for 2 h, and then naturally cooled to ambient temperature under Ar.

    2.3 Fabrication of FeS2@C/CNT Electrode and AIBs

    The flexible FeS2@C/CNT film was fabricated by the vacuum filtration method. Firstly, 15 mg of CNT and 35 mg FeS2@C were dispersed in 80 mL H2O using an intensive ultrasonication probe for 30 min. Then, the mixed solution was filtered through a mixed cellulose ester membrane(1.2 μm pore size, Millipore). The obtained filter cake was then vacuum-dried for 24 h to get a freestanding film.

    The binder-free and freestanding FeS2@C/CNT directly utilized as a cathode in the AIBs. To compare with commercial FeS2, the FeS2was firstly mixed with KB carbon with the same carbon content in FeS2@C/CNT. Then the mixture and polytetrafluoroethylene (PTFE) (weight ratio of 9:1) mixed in deionized water followed by overnight high-vacuum heating under 100 °C. The areal loading of the active materials is around 1.0 mg cm?2. The 1-ethyl-3-methylimidazolium chloride ([EMIm]Cl, 98%, Sigma)mixed with anhydrous aluminum chloride (99.99%, Sigma-Aldrich) (mole ratio of 1.3) to obtain the ionic liquid (IL)electrolyte (35 μL). A piece of glass fiber was used as the separator (Whatman). The aluminum foil (Sigma, 99.999%,0.25 mm) is directly treated as the anode electrode. We applied soft package and Swagelok-type cells to assemble the batteries in glove box filled with Ar gas.

    2.4 Materials Characterization & Electrochemical Measurements

    The samples were characterized by X-ray diffraction (XRD)(Bruker, Cu Kα, λ = 0.15406 nm, D8-Advance X-ray diffractometer,). The transmission electron microscopy (TEM),scanning electron microscopy (SEM) (JEOL-7001), and high-resolution TEM (HR-TEM) (FEI F20 FEG-STEM)were used to characterize the morphology of samples. The contact angles of ILs (drop on glass substrates under various temperature) were test via optical tensiometer (OCA 15 E/B). The electrochemical performance of the FeS2@C/CNT, and FeS2/C was tested by battery tester (LANDCT2001A). The cyclic voltammogram (CV) was detected via electrochemical station (CHI 604e Shanghai, China)under a scan rate of 0.2 mV s?1.

    2.5 Computational Details

    All the DFT calculations were performed with the Perdew-Burke-Ernzerhof (PBE) functional using the VASP code. The project-augmented wave (PAW) method was applied to represent the core-valence electron interaction[29]. The valence electronic states were expanded in plane wave basis sets with energy cutoff at 500 eV. For the bulk structure, 5 × 5 × 5, 5 × 5 × 3, 4 × 4 × 2k-point mesh was used for cubic FeS2, hexagonal FeS, and hexagonal Al2S3. The convergence criterion of the total energy was set to be within 1 × 10?5eV for the k-point integration and the force threshold for the optimization was 0.01 eV ??1. The ion-electron interaction was described with the PAW method. A FeS2(001) and graphene slab models were employed to simulate the surface properties. The Monkhorst-Pack method with the centered k-point grid (1 × 2 × 2) was used for surface calculations, respectively. All of the calculations were continued until the force has converged to less than 0.02 eV ??1,and energies have converged within 10-5eV.

    The hydrogen and water adsorption energy on various surfaces is defined as Eq. (1):

    whereEbase?Alis the total energy of the slab model with Al adsorption,Ebaseis the energy of a clean slab surface, andEAlis that for Al species, which refers to the Al single atom.

    3 Results and Discussion

    3.1 Synthesis and Characterizations of the FeS2@C/CNT

    Scheme 1 presents the preparation of the yolk-shell spheres MOF-derived FeS2@C and the binder-free/self-standing FeS2@C/CNT film. The Fe-MOF was prepared via the hydrothermal method (a detailed synthetic condition in the supplementary materials). Then the Fe-MOF was treated in the acidic condition to obtain the yolk-shell hollow Fe-MOF spheres, which enabled abundant active sites to improve the electrolyte infiltration. The dopamine was coated and calcined to improve the electron conductivity of the electrode and control the volume expansion during the cycling.After sulfurization, the yolk-shell MOF-derived FeS2@C was obtained. Based on previous literature [12], the commonly used binders and current collectors have unexpected side reactions with Lewis acid IL electrolyte, which results in capacity decay and material pulverization. To avoid these issues, CNTs were simultaneously prepared with the FeS2@C to obtain binder-free and freestanding FeS2@C/CNT electrode.

    Figure 1a displays the field emission scanning electron microscopy (FE-SEM) of the Fe-MOF. To obtain yolk-shell structure FeS2@C, the pristine solid nanospheres (Fe-MOF,Fig. S1) was etched in acid with different periods. The SEM and TEM images of the etched Fe-MOF (Figs. S2a, b) indicate the transformation from solid nanospheres to the hollow nanospheres after etching. The etching process were optimized via comparing with different conditions. More detailed morphological evolution under different etching stages is presented in Figs. S3 and S4, which was similar to the preparation of other MOF-derived materials [30-32].As the etching time increases, the structure of the original Fe-MOF was gradually destroyed. After 2 h, a yolk-shell structure was formed based on the original Fe-MOF (Fig.S3). The cavity became larger after 4 h (Fig. S2), and each of the resultant samples possessed a spherical yolk-shell structure. After 6 h of etching, some of the particles were destroyed and a large interior hollow cavity was formed in the center of the Fe-MOF (Fig. S4). In order to maintain the complete and uniform structure of the material as well as reserve suitable space for the volume expansion of FeS2sulfide during the cycling, 4 h of etching was selected as the optimal solution. Figure 1b shows the SEM image of dopamine-coated and sulfurized material (FeS2@C), which still maintains similar nanospheres morphology with the previous Fe-MOF. The TEM images of the FeS2@C (Figs. 1c, d)exhibit the yolk-shell hollow structure. The HR-TEM image shows a thin layer of carbon-coated on the surface of the crystal FeS2(Fig. 1e). Moreover, a set of lattice fringes withd-spacing of 0.24 nm that are associated with the (210) plane of FeS2crystals (JCPDS No. 42-1340) can be observed. The EDS mapping of the FeS2@C (Fig. 1f) not only indicates that Fe, S, N, and C elements are homogeneously distributed throughout the hollow yolk-sheath material but also confirms the nitrogen-doped sheath derived from the dopamine [12].Based on the thermal gravimetric analysis data (Fig. S5), the mass content of carbon in FeS2@C is around 10 wt%. The XRD pattern of the product also proves that the obtained production with the characteristic peaks (Fig. S5) matches with the standard FeS2phase (JCPDS No. 65-1765).

    The binder-free and self-standing FeS2@C/CNT electrode is shown in the SEM image (Fig. 1g). The nanosphere FeS2@C was surrounded by the CNT substrate. The crossview structure of the FeS2@C/CNT (Fig. 1h) also exhibits the homogenous distribution of the FeS2particle among the CNT. The thickness of the FeS2@C/CNT, which can be controlled via modifying the added raw materials during the filtration process, is around 100 μm (inset of Fig. 1h).Moreover, the mechanical property of the FeS2@C/CNT is presented in the stress-strain curve (Fig. 1i). Maximum stretch stress (15 MPa) was achieved at the strain percentage of 1.4%. The considerable mechanical properties of the tested sample proved the enhanced flexible feature of this electrode.

    3.2 Electrochemical Performance of FeS2@C/CNT

    Scheme 1 Schematic synthesis of FeS2@C yolk-shell spheres and self-standing/bind-free FeS2@C/CNT with an interpenetrative network structure

    The electrochemical performances of the FeS2@C/CNT and normal FeS2with carbon mixture electrode (FeS2/C) cathodes under room temperature are presented in Fig. 2. The cyclic voltammogram (CV) of the FeS2@C/CNT (Fig. 2a),which is conducted at 0.2 mV s?1, exhibits the initial cycle with weak peaks around 1.2 and 0.6 V during the anodic oxidation process and 0.7 and 1.3 V during the reduction process. Meanwhile, the initial discharge-charge curves(Fig. S6) also exhibit similar plateau during the initial discharge-charge process, which is assigned to the conversion of FeS2, accompanied by the formation of solid electrolyte interface (SEI) [10, 33]. The initial discharge capacity (as high as 352 mAh g?1) with irreversible capacity is ascribed to the SEI and side reaction between the electrolyte and electrode [33]. After the activation process in the first cycle, the discharge-charge curves display stable discharge plateau around 0.9 V and charge platform ca. 1.2 V (Fig. 2b), which are consistent with the corresponding oxidation and reduction peaks in the CV curves (2ndcycle, Fig. 2a). To avoid the electrolyte decomposition at high voltage, the galvanostatic discharging-charging of the FeS2/C and FeS2@C/CNT was tested at a current density of 100 mA g?1between 0.3 and 1.8 V. In Fig. 2b, the capacity of pristine FeS2/C cathode drastically reduces from 143 to 25 mAh g?1after 50 cycles.Compared with the inferior capacity of FeS2/C and declined capacity after cycled, the discharge capacity of FeS2@C/CNT reached as high as 286 mAh g?1and retained above 256 mAh g?1after 50 cycles. The enhanced performance of FeS2@C/CNT was mainly ascribed to the carbon-coated structure, conductive matrix, and enhanced active sites of yolk-shell structure.

    The rate capacity and cycling stability were also significant parameters for AIBs. The rate capacity of FeS2@C/CNT is compared with normal FeS2/C and other representative cathodes in AIBs (Fig. 2c) [10-12]. Even under a high current density of 2 A g?1, the FeS2@C/CNT could still deliver a capacity of 151 mAh g?1, which was among the best rate performance of AIBs reported to date [7]. Note that, due to the initially irreversible capacity, the listed capacity of FeS2@C/CNT were the capacity of second cycle.The superior rate capacity is mainly ascribed to the welldesigned structure, high conductive nitrogen-doped carbon(N-C) layers, and CNT matrix. The coated N-C layer also highly restricted the expansion of the FeS2and facilitated the kinetic process, which would be discussed in detail in the following part. Furthermore, the binder-free and freestanding feature would drastically reduce the side reaction between the electrolyte and binder/current collector [34].In Fig. 2d, the FeS2@C/CNT maintains a high capacity of 241 mAh g?1after 100 cycles under a current density of 100 mA g?1. Even under a high current density of 1 A g?1,the FeS2@C/CNT exhibits above 80 mAh g?1discharge capacity after long-term cycling of 2,000 times with above 95% Coulombic efficiency (Fig. 2e). Some unstable cycles were mainly ascribed to the temperature during the longterm testing. The flexible AIBs based on the FeS2@C/CNT(two batteries back to back as shown in the inset of Fig. 2e)can light up an LED, indicating the promising potential of FeS2@C/CNT in flexible AIBs.

    Fig. 1 SEM images of a Fe-MOF, b FeS2@C yolk-shell nanospheres. c, d TEM and e HR-TEM images of yolk-shell FeS2@C. f Element mapping of the FeS2@C. g, h SEM images of the surface and fractured FeS2@C/CNT electrode. Inset in h exhibits the thickness of the FeS2@C/CNT. i Stress-strain curve of the flexible FeS2@C/CNT electrode with the folded electrode inset

    3.3 Mechanism and DFT Investigation

    X-ray photoelectron spectroscopy (XPS), TEM, and DFT calculations were further applied to investigate the reaction process and explore the origin of the electrochemical feature of FeS2@C/CNT. The electrochemical process of FeS2was characterized via XPS and then simulated via DFT calculations. In Fig. S7, the 2p spectra of S with two major doublet peaks at 162.7 (2p3/2) and 163.8 (2p1/2) eV can be signed to the S22?in pristine FeS2[35]. After discharged, the 2p spectra of S shifted to the low binding energy with peaks at 161.7 (2p3/2) and 163.4 (2p1/2) eV which could be signed to the S2?in FeS [36]. After charged, the single shifted back to the high binding energy at 162.7 (2p3/2) and 163.9 (2p1/2)eV, which also indicates the reversibility of the reaction.The result of the conversion reaction between FeS2and FeS is consistent with the previous report on FeS2in AIBs [37].Meanwhile, the variation of XPS spectra of Fe 2p during the discharge-charge process is similar to the reported variation from FeS2to FeS (Fig. S7), which further confirms the proposed conversion reaction of the FeS2. The simulation of the electrochemical process of FeS2is conducted via the DFT calculation (Fig. 3a). Based on the simulation,the electrochemical process would generate a drastically volumetric expansion of active material. The unit cell of the FeS2(39.48 ?3) increased to a large volume (65.52 ?3)upon the discharge process. The detailed simulation result of the involved materials is listed in Table S1. The above 160% volume expansion in the unit cell will generate serious electrode material pulverization and irreversible capacity with inferior cycling stability (Fig. 3b), which results in the inferior performance of the normal FeS2/C electrode.

    Fig. 2 a 1st and 2nd cyclic voltammogram curves of FeS2@C/CNT. b 2nd and 50th galvanostatic discharge-charge curves of the FeS2@C/CNT and FeS2/C electrode at a current density of 100 mA g?1. c Rate capacity of FeS2@C/CNT and FeS2/C electrode in comparison with representative cathodes in AIBs [10-12]. d Cycling performance of the FeS2@C/CNT under a current density of 100 mA g?1. e Discharge capacity and Coulombic efficiency versus cycle number of FeS2@C/CNT electrode at a high current density of 1 A g?1. Inset of e exhibits the flexible FeS2@C/CNT in soft package AIBs

    To explore the origin of the electrochemical feature of the FeS2@C/CNT electrode, particularly the cycling stability and rate capacity, SEM, TEM, and DFT were utilized to investigate the designed electrode during the electrochemical process. Based on the above simulation result of volumetric variation during the electrochemical process, a feasible strategy was required to accommodate the volume expansion of active materials [38]. The FeS2@C/CNT owns not only the yolk-shell structure but also extra void space(Fig. 1d). Thus, this yolk-shell structure with the outermost carbon layer restrained the expansion of the active material and stabilized the electrode. The void space inside was sufficient to tolerate the volume variation, which was also beneficial to the electrode stability. Figure 3c, d shows the optimal FeS2and the loading of FeS2on the N-doped carbon, which is corresponding to the N-doped carbon layer in FeS2@C/CNT models. The obvious folded structure of the N-C layer revealed the strong interaction between FeS2and N-C, which also effectively reduced the FeS2splitting up from the carbon structure and active material pulverization.Furthermore, the morphology of FeS2@C/CNT after 50thand 200thcycles (Fig. S8) are slightly cracked compared with the initial sample (Fig. 1d), which confirms the simulation results on this stable yolk-shell FeS2@C/CNT. On the contrary, the micro-FeS2in the normal FeS2/C electrode is seriously degenerated after cycling with obvious cracking and pulverization (Figs. S9 and S10).

    To better understand the kinetic process during the electrochemical reaction and enhanced rate capacity, the simulation of absorption of aluminum ion on pristine FeS2and FeS2@N-C/CNT was conducted to reveal the advantage of the designed structure. Based on the simulation result(Figs. 3e, f), the aluminum ion between the N-C layer and FeS2has much strong adsorption energy (?1.76 eV)in comparison with the bare FeS2module (?1.41 eV) as shown in Table S2. The lower adsorption energy indicates the strengthened reaction process when Al ion involved,which is beneficial for the rate capacity of FeS2@N-C/CNT. Meanwhile, in Fig. 4g, when the Al locates between FeS2and N-C, the charge accumulation (yellow ball) can be observed, which illustrates the obvious electron transfer within Al and FeS2/N-C and further proves the strong interaction between them. Based on the above characterization and simulation, the well-designed FeS2@C/CNT not only prevents the agglomeration of FeS2particles during cycling but also accelerates the reaction process, contributing to the robust cycling and high rate capacity.

    3.4 All-climate Performance of FeS2@C/CNT in AIBs

    Most of the studies on AIBs to date focus on room temperature or high-temperature electrochemical performance [37,42]. Although the graphite-based AIBs have a considerable process under a wide temperature range, the inherently limited capacity (less than 150 mAh g?1even at high temperature) still hinders the development of all-climate AIB,especially under low temperature [8]. Thus, emerging highcapacity metal chalcogenide-based electrodes, such as metal sulfides, were worth exploring, yet few reported. Based on the inherent ion-conductivity of FeS2, enhanced performance at room temperature, and above simulation of the kinetic process of the FeS2@C/CNT cathode, the battery performance of FeS2@C/CNT under all-climate, especially for the cold climate, was further investigated in detail. The inherent advantage of the IL-based AIBs contributed to enhanced electrochemical performance under low temperature. The contact angle of IL only increased from 55 to 64°when the temperature reduced from 25 to ?25 °C (Figs.S11a-c). On the contrary, the considerable organic solventbased electrolyte of LIBs and SIBs froze at ?25 °C [43].The wettability experiment of IL indicates that the stable infiltration of the IL under a range of temperatures from subzero to room temperature. Moreover, the IL electrolyte also shows stable ion conductivity under a range of temperatures (Fig. S11d). In Fig. 3a, the discharge-charge curves of the FeS2@C/CNT are exhibited under the temperature from?25 to 50 °C. Although the previous literature has reported the inferior cycling stability of batteries at high temperature [39], the FeS2@C/CNT exhibits stable capacity and Coulombic efficiency at 50 °C (Fig. S12), which is ascribed to the void yolk-shell structure and well-protected carbon layer to prevent the materials pulverization and side reaction.Owing to the reduced ion conductivity of the electrolyte and the inherently kinetic process on cathode/electrolyte under low temperature [40], the battery performance of FeS2/C drastically reduced under low temperature. However, the FeS2@C/CNT exhibit comparable high capacity retention even under ?25 °C (above 117 mAh g?1at 100 mA g?1,Figs. 4a, b). When compared with that of normal FeS2/C(only 10% capacity retention under ?25 °C), the FeS2@C/CNT exhibited much higher capacity retention (above four times higher than that of FeS2/C). Although low temperature with slow kinetic process reduced the stability of the discharge-charge plateau, the MOF-derived carbon on FeS2,CNT matrix and hollow structure still largely enhanced the high conductivity and kinetic process of FeS2@C/CNT in compared with FeS2/C. Furthermore, the cycling stability of the FeS2@C/CNT under low temperature still maintains stable with around 85 mAh g?1after the 100thcycle at 100 mA g?1(Fig. 4c). These features and improvements are ascribed to the high conductivity carbon matrix, hierarchical porous structure, and, more importantly, enhanced kinetic process as simulated above. The representative all-climate electrode, such as graphite-based AIBs, Prussian blue/CNTs(BP-CNTs) in SIBs, optimized NASICON in SIBs, and LiMn2O4doped with Ni in LIBs were compared with the FeS2@C/CNT at a range of current densities under subzero temperature ~ ?25 °C [18, 39-41]. The FeS2@C/CNT exhibited higher capacity performance among the representative low-temperature batteries (Fig. 4d). The inherently high ionic conductivity of IL under a range of temperatures (Fig.S11d) and the rational electrode design of the FeS2@C/CNT both contribute to the enhanced all-climate performance of FeS2@C/CNT.

    Fig. 3 a Schematic process of the charge-discharge process toward AIBs. b Simulation of the volume expansion of the FeS2 in a unit cell. c-d Feasible models for optimal FeS2 and adsorption sites of FeS2 on N-C. e-f Feasible models for optimal adsorption sites of Al ion on FeS2 and between the N-C and FeS2. g Different charge density of Al ion between N-C and the FeS2, the isosurface value is set to be 0.05 e ??3. The blonde, brown, nigger brown, and blue balls represent S, Fe, C, and Al atoms

    Fig. 4 a Discharge-charge curves of the FeS2@C/CNT under a range of temperatures at a current density of 100 mA g?1. b Capacity retention of FeS2@C/CNT and FeS2/C electrodes at a current density of 100 mA g?1 from ?25 to 50 °C. c 5th, 50th, and 100th charge-discharge curves of the FeS2@C/CNT under ?25 °C at a current density of 100 mA g?1. d Rate capacity of FeS2@C/CNT in AIBs and other representative lowtemperature electrode in AIBs, SIBs, and LIBs at low temperature (~ ?25 °C) [18, 39-41]

    4 Conclusion

    In summary, we prepared a free-standing and binder-free FeS2@C/CNT and applied in all-climate AIBs for the first time. The optimized electrode exhibited a high capacity (286 mAh g?1at 100 mA g?1), robust cycling stability (above 80 mAh g?1at 1 A g?1after 2,000 cycles),remarkable rate performance (151 mAh g?1under a high current density of 2 A g?1), and more importantly, excellent all-climate behavior (delivering above 117 mAh g?1at 100 mA g?1under low temperature of ?25 °C). Based on the detailed characterization and DFT simulation, we reveal that the excellent electrochemical performance is ascribed to two main reasons; the yolk-shell structure with sufficient void space restricts volume expansion and electrode pulverization with robust electrode stability. The deliberately designed hierarchical structure and N-C-coated layer with CNT matrix not only allows abundant exposed active sites but also facilitates the kinetic process with improved ion/electron conductivity even under a wide temperature window. Furthermore, the binder-free and freestanding features reduce the active material disintegration and side reaction with significantly increased electrochemical stability under ambient temperature. The findings reported herein provide new insights into the rational design of high-performance composite electrodes for scalable and flexible AIBs in allclimate applications.

    AcknowledgementsThe authors acknowledge the financial support for Australian Research Council through its Discovery and Linkage Programs. This work was performed in part at Australian Microscopy & Microanalysis Research Facility at the Centre for Microscopy and Microanalysis, the University of Queensland (UQ).The authors also acknowledge National Natural Science Foundation of China (51901100 and 51871119), Jiangsu Provincial Founds for Natural Science Foundation (BK20180015), China Postdoctoral Science Foundation (2018M640481 and 2019T120426), and Jiangsu Postdoctoral Research Fund (2019K003).

    Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing,adaptation, distribution and reproduction in any medium or format,as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.

    Supplementary InformationThe online version contains supplementary material available at https:// doi. org/ 10. 1007/s40820- 021- 00682-8.

    久久久久精品性色| kizo精华| 交换朋友夫妻互换小说| 国产97色在线日韩免费| 久久精品国产综合久久久| 悠悠久久av| 秋霞伦理黄片| 电影成人av| 最新在线观看一区二区三区 | 在线观看三级黄色| 又黄又粗又硬又大视频| 国产成人系列免费观看| 中文字幕人妻丝袜制服| 大码成人一级视频| 国产精品熟女久久久久浪| 嫩草影视91久久| 国产在线视频一区二区| 国产精品一国产av| 国精品久久久久久国模美| 亚洲一区中文字幕在线| 精品一品国产午夜福利视频| 日韩av不卡免费在线播放| 在线观看三级黄色| 亚洲成人手机| 麻豆乱淫一区二区| 久久久久久免费高清国产稀缺| 中文天堂在线官网| 哪个播放器可以免费观看大片| 国产一区二区三区综合在线观看| 男女床上黄色一级片免费看| 80岁老熟妇乱子伦牲交| 精品少妇黑人巨大在线播放| 国产伦人伦偷精品视频| 亚洲七黄色美女视频| 天天躁夜夜躁狠狠久久av| 国产欧美日韩综合在线一区二区| 十分钟在线观看高清视频www| 国产精品欧美亚洲77777| 丁香六月欧美| 国产乱来视频区| 国产成人系列免费观看| 久久鲁丝午夜福利片| 人人妻人人澡人人爽人人夜夜| 欧美精品一区二区大全| 哪个播放器可以免费观看大片| 美女主播在线视频| 十分钟在线观看高清视频www| svipshipincom国产片| 免费观看性生交大片5| 一二三四在线观看免费中文在| 日韩制服丝袜自拍偷拍| 亚洲久久久国产精品| 国产成人精品久久二区二区91 | 欧美精品av麻豆av| 欧美 亚洲 国产 日韩一| 自线自在国产av| 亚洲,欧美精品.| 天天操日日干夜夜撸| 亚洲av男天堂| 亚洲精品av麻豆狂野| 一级黄片播放器| 美女中出高潮动态图| 香蕉丝袜av| 日本vs欧美在线观看视频| 一二三四中文在线观看免费高清| 亚洲一区中文字幕在线| 久久国产精品男人的天堂亚洲| 成人免费观看视频高清| 国产精品一国产av| 9色porny在线观看| 久热爱精品视频在线9| 美女中出高潮动态图| 国产伦人伦偷精品视频| 日日撸夜夜添| 国产成人免费无遮挡视频| 亚洲精品国产区一区二| 亚洲第一青青草原| 久久久久久久久久久久大奶| 亚洲精品乱久久久久久| 女人爽到高潮嗷嗷叫在线视频| 美女视频免费永久观看网站| 熟女av电影| 最新的欧美精品一区二区| 多毛熟女@视频| 9热在线视频观看99| av在线老鸭窝| 最近中文字幕2019免费版| 人人妻人人澡人人看| 天美传媒精品一区二区| 久久久精品区二区三区| 黄片小视频在线播放| 视频在线观看一区二区三区| 欧美中文综合在线视频| 五月天丁香电影| 久久国产精品男人的天堂亚洲| 人人妻人人澡人人爽人人夜夜| 亚洲美女黄色视频免费看| 成人漫画全彩无遮挡| 国产亚洲av高清不卡| 欧美变态另类bdsm刘玥| 久久天躁狠狠躁夜夜2o2o | 亚洲欧洲精品一区二区精品久久久 | 国产高清国产精品国产三级| 国产精品久久久久久精品电影小说| 女人高潮潮喷娇喘18禁视频| videosex国产| 精品国产一区二区久久| 91精品伊人久久大香线蕉| 成年av动漫网址| www.av在线官网国产| 欧美日韩视频精品一区| 欧美日韩视频高清一区二区三区二| 在线 av 中文字幕| 美女中出高潮动态图| 交换朋友夫妻互换小说| 欧美国产精品一级二级三级| 欧美国产精品va在线观看不卡| 韩国精品一区二区三区| 午夜福利在线免费观看网站| 亚洲国产av影院在线观看| 精品久久久精品久久久| 免费黄频网站在线观看国产| 人体艺术视频欧美日本| 成人国产av品久久久| 丝瓜视频免费看黄片| 久久久国产精品麻豆| av免费观看日本| 国产99久久九九免费精品| 黄网站色视频无遮挡免费观看| 久久久精品免费免费高清| 国产福利在线免费观看视频| 又粗又硬又长又爽又黄的视频| 人妻人人澡人人爽人人| 一个人免费看片子| 成年美女黄网站色视频大全免费| 桃花免费在线播放| 国产在视频线精品| 搡老岳熟女国产| 精品免费久久久久久久清纯 | 七月丁香在线播放| av卡一久久| 久久精品国产a三级三级三级| 欧美日本中文国产一区发布| 人人妻人人澡人人看| 一级毛片我不卡| 亚洲av电影在线观看一区二区三区| 在线 av 中文字幕| avwww免费| 亚洲精品视频女| av一本久久久久| 亚洲三区欧美一区| 99re6热这里在线精品视频| 99香蕉大伊视频| 少妇猛男粗大的猛烈进出视频| 老司机靠b影院| 国产成人精品福利久久| 亚洲美女视频黄频| 欧美日韩国产mv在线观看视频| 伊人久久国产一区二区| 中文字幕人妻丝袜制服| av又黄又爽大尺度在线免费看| 看免费av毛片| 五月天丁香电影| 国产精品香港三级国产av潘金莲 | 亚洲精品自拍成人| 亚洲情色 制服丝袜| 国产精品久久久久久精品古装| 欧美人与善性xxx| 国产熟女午夜一区二区三区| 国产免费视频播放在线视频| videos熟女内射| 午夜福利在线免费观看网站| 各种免费的搞黄视频| 最近手机中文字幕大全| 美女中出高潮动态图| 一级,二级,三级黄色视频| 久久影院123| 黄色 视频免费看| 在线精品无人区一区二区三| 99热国产这里只有精品6| 女人爽到高潮嗷嗷叫在线视频| 老熟女久久久| 国产成人精品久久久久久| 国产成人91sexporn| 夜夜骑夜夜射夜夜干| avwww免费| 91aial.com中文字幕在线观看| 天美传媒精品一区二区| 亚洲精品一区蜜桃| 久久99一区二区三区| 国产片内射在线| 欧美成人精品欧美一级黄| 欧美最新免费一区二区三区| 成人三级做爰电影| 亚洲五月色婷婷综合| 国产伦理片在线播放av一区| 中文字幕人妻熟女乱码| 我要看黄色一级片免费的| 久久婷婷青草| 国产精品成人在线| 少妇猛男粗大的猛烈进出视频| 极品少妇高潮喷水抽搐| 欧美精品一区二区大全| 欧美久久黑人一区二区| 免费黄网站久久成人精品| 国产av码专区亚洲av| 2018国产大陆天天弄谢| 性色av一级| 成人亚洲欧美一区二区av| 自拍欧美九色日韩亚洲蝌蚪91| 美女国产高潮福利片在线看| 亚洲欧美成人精品一区二区| 操出白浆在线播放| 美国免费a级毛片| 日韩欧美一区视频在线观看| 久久性视频一级片| 丰满少妇做爰视频| 考比视频在线观看| 成人黄色视频免费在线看| 久久精品国产综合久久久| 午夜免费观看性视频| 亚洲美女黄色视频免费看| 王馨瑶露胸无遮挡在线观看| 美女午夜性视频免费| 只有这里有精品99| 亚洲成人手机| 亚洲精品久久成人aⅴ小说| 哪个播放器可以免费观看大片| 热re99久久国产66热| 男人添女人高潮全过程视频| 国产精品偷伦视频观看了| 男男h啪啪无遮挡| 巨乳人妻的诱惑在线观看| 日韩大码丰满熟妇| 卡戴珊不雅视频在线播放| tube8黄色片| 亚洲av国产av综合av卡| 丝袜美足系列| 秋霞伦理黄片| 操出白浆在线播放| 热99国产精品久久久久久7| 国产一卡二卡三卡精品 | 多毛熟女@视频| 亚洲成人一二三区av| 五月开心婷婷网| 桃花免费在线播放| 大片免费播放器 马上看| 精品亚洲乱码少妇综合久久| 大话2 男鬼变身卡| 国产亚洲午夜精品一区二区久久| 免费黄色在线免费观看| 不卡视频在线观看欧美| 国产成人免费观看mmmm| 亚洲三区欧美一区| 精品国产超薄肉色丝袜足j| 赤兔流量卡办理| 免费在线观看黄色视频的| 热99国产精品久久久久久7| 高清视频免费观看一区二区| 国产成人免费观看mmmm| 黄网站色视频无遮挡免费观看| 国产探花极品一区二区| 亚洲欧美成人综合另类久久久| 亚洲欧美清纯卡通| a级片在线免费高清观看视频| 亚洲一卡2卡3卡4卡5卡精品中文| av国产久精品久网站免费入址| av视频免费观看在线观看| 街头女战士在线观看网站| 激情五月婷婷亚洲| 亚洲欧美中文字幕日韩二区| 亚洲男人天堂网一区| 操美女的视频在线观看| 韩国av在线不卡| 国产高清不卡午夜福利| 成人18禁高潮啪啪吃奶动态图| 亚洲熟女毛片儿| 五月开心婷婷网| 亚洲一级一片aⅴ在线观看| 亚洲精品成人av观看孕妇| 色94色欧美一区二区| av一本久久久久| 国产乱人偷精品视频| 十八禁人妻一区二区| 国产成人免费无遮挡视频| 80岁老熟妇乱子伦牲交| 精品一区二区三区四区五区乱码 | 黄色怎么调成土黄色| 免费少妇av软件| 最黄视频免费看| 9热在线视频观看99| 性高湖久久久久久久久免费观看| 一本—道久久a久久精品蜜桃钙片| 不卡av一区二区三区| 日韩,欧美,国产一区二区三区| 一本色道久久久久久精品综合| 日韩 亚洲 欧美在线| 五月开心婷婷网| 国产亚洲最大av| 国产乱人偷精品视频| 91国产中文字幕| 免费在线观看视频国产中文字幕亚洲 | 永久免费av网站大全| 午夜久久久在线观看| 国产精品蜜桃在线观看| 国产精品av久久久久免费| 两个人看的免费小视频| 男女午夜视频在线观看| 91国产中文字幕| av女优亚洲男人天堂| 成人亚洲精品一区在线观看| 国产精品一区二区在线不卡| 国产成人系列免费观看| 69精品国产乱码久久久| 欧美日韩av久久| 99国产综合亚洲精品| 丰满乱子伦码专区| 丝袜喷水一区| 欧美人与性动交α欧美精品济南到| 男男h啪啪无遮挡| 熟女av电影| 国产亚洲欧美精品永久| www.自偷自拍.com| 亚洲精品日韩在线中文字幕| 99久久99久久久精品蜜桃| 国产av一区二区精品久久| 国产精品一国产av| 九色亚洲精品在线播放| 国产熟女欧美一区二区| 丰满迷人的少妇在线观看| 国产免费又黄又爽又色| 最黄视频免费看| 一边摸一边做爽爽视频免费| 大话2 男鬼变身卡| 亚洲婷婷狠狠爱综合网| 欧美人与善性xxx| 午夜久久久在线观看| 久久久国产欧美日韩av| 69精品国产乱码久久久| 一级a爱视频在线免费观看| 国产高清不卡午夜福利| 国产一区二区 视频在线| 男女无遮挡免费网站观看| 日本vs欧美在线观看视频| 蜜桃国产av成人99| 一级,二级,三级黄色视频| 十八禁人妻一区二区| 国产老妇伦熟女老妇高清| 90打野战视频偷拍视频| 国产成人av激情在线播放| 日韩电影二区| e午夜精品久久久久久久| 999精品在线视频| 色精品久久人妻99蜜桃| av电影中文网址| 91成人精品电影| 少妇人妻 视频| 久久久久久免费高清国产稀缺| 大香蕉久久网| av天堂久久9| 精品人妻在线不人妻| 亚洲国产欧美在线一区| 国产深夜福利视频在线观看| 一区在线观看完整版| 欧美日韩国产mv在线观看视频| 中文字幕人妻丝袜一区二区 | 亚洲精品国产av蜜桃| 纵有疾风起免费观看全集完整版| 国精品久久久久久国模美| 国产伦理片在线播放av一区| 亚洲国产中文字幕在线视频| tube8黄色片| 少妇人妻久久综合中文| 在线观看www视频免费| 1024视频免费在线观看| 五月天丁香电影| 狠狠婷婷综合久久久久久88av| 91老司机精品| 精品人妻在线不人妻| 又粗又硬又长又爽又黄的视频| 18禁动态无遮挡网站| 18在线观看网站| 丝袜脚勾引网站| av.在线天堂| 亚洲国产最新在线播放| 性高湖久久久久久久久免费观看| 激情五月婷婷亚洲| 成年动漫av网址| 亚洲av福利一区| 免费黄频网站在线观看国产| 国产一区二区在线观看av| 国产欧美日韩一区二区三区在线| 亚洲精品自拍成人| 亚洲一区中文字幕在线| 国产有黄有色有爽视频| 99久久综合免费| 亚洲精品美女久久av网站| av一本久久久久| 美女中出高潮动态图| 久久久久国产一级毛片高清牌| 亚洲成人一二三区av| 汤姆久久久久久久影院中文字幕| 日本欧美国产在线视频| 天天添夜夜摸| 热re99久久国产66热| 女人久久www免费人成看片| 最近中文字幕高清免费大全6| 久热这里只有精品99| 久久久国产一区二区| 国产色婷婷99| 精品久久蜜臀av无| 国产一级毛片在线| 91aial.com中文字幕在线观看| 国产精品熟女久久久久浪| 丝袜美腿诱惑在线| 亚洲婷婷狠狠爱综合网| 美女高潮到喷水免费观看| 免费观看性生交大片5| 亚洲一区中文字幕在线| 肉色欧美久久久久久久蜜桃| 美国免费a级毛片| 国产精品一区二区在线观看99| 国产精品女同一区二区软件| 另类亚洲欧美激情| 国产视频首页在线观看| 免费看不卡的av| 国产视频首页在线观看| 热99久久久久精品小说推荐| 一级毛片电影观看| 日韩精品免费视频一区二区三区| 少妇人妻 视频| 自线自在国产av| av福利片在线| 纯流量卡能插随身wifi吗| 最黄视频免费看| 狠狠精品人妻久久久久久综合| 国产免费福利视频在线观看| 美国免费a级毛片| 香蕉丝袜av| 婷婷色综合www| av.在线天堂| 亚洲欧美一区二区三区久久| 欧美精品高潮呻吟av久久| bbb黄色大片| 亚洲精品国产区一区二| 亚洲天堂av无毛| 9热在线视频观看99| 美女大奶头黄色视频| 国产精品免费视频内射| av网站免费在线观看视频| 欧美日韩av久久| a级毛片在线看网站| 九色亚洲精品在线播放| 日韩一本色道免费dvd| 久久久久国产精品人妻一区二区| 亚洲欧美精品自产自拍| 王馨瑶露胸无遮挡在线观看| 天天添夜夜摸| 午夜福利影视在线免费观看| 叶爱在线成人免费视频播放| 一级毛片我不卡| av.在线天堂| 国产老妇伦熟女老妇高清| 国产成人精品久久二区二区91 | 欧美在线黄色| 一边亲一边摸免费视频| 国产亚洲欧美精品永久| 一二三四在线观看免费中文在| 亚洲av电影在线进入| 亚洲婷婷狠狠爱综合网| 人体艺术视频欧美日本| 老司机深夜福利视频在线观看 | 男女午夜视频在线观看| 成人国语在线视频| 亚洲av在线观看美女高潮| 少妇人妻久久综合中文| 亚洲成人免费av在线播放| 人人妻人人澡人人看| 亚洲精品一区蜜桃| 成人国产av品久久久| 夫妻性生交免费视频一级片| 99九九在线精品视频| 国产熟女欧美一区二区| 在线 av 中文字幕| a级毛片在线看网站| 一边摸一边做爽爽视频免费| 久久99精品国语久久久| 婷婷色av中文字幕| 日本午夜av视频| 嫩草影视91久久| 精品久久久久久电影网| 国产一区有黄有色的免费视频| 成人国产麻豆网| 女人高潮潮喷娇喘18禁视频| 日韩一卡2卡3卡4卡2021年| 国产成人系列免费观看| 国产成人啪精品午夜网站| 亚洲少妇的诱惑av| 亚洲免费av在线视频| 青春草视频在线免费观看| 国产亚洲最大av| 亚洲国产精品999| 国精品久久久久久国模美| 久久女婷五月综合色啪小说| 人妻人人澡人人爽人人| 国产成人精品久久二区二区91 | 中文字幕人妻丝袜一区二区 | 成人亚洲精品一区在线观看| 国产在视频线精品| 满18在线观看网站| 秋霞在线观看毛片| 日本av免费视频播放| 伊人久久大香线蕉亚洲五| 成人国产av品久久久| 亚洲精品日韩在线中文字幕| 亚洲精品国产区一区二| 又大又黄又爽视频免费| 97在线人人人人妻| 亚洲综合色网址| 宅男免费午夜| 亚洲 欧美一区二区三区| 亚洲av电影在线进入| 国产精品嫩草影院av在线观看| 男女免费视频国产| 国产黄色视频一区二区在线观看| 午夜日本视频在线| 妹子高潮喷水视频| 国产极品粉嫩免费观看在线| 国产亚洲av片在线观看秒播厂| 可以免费在线观看a视频的电影网站 | 满18在线观看网站| 亚洲欧美日韩另类电影网站| 欧美精品一区二区免费开放| 免费黄网站久久成人精品| 18禁裸乳无遮挡动漫免费视频| 午夜影院在线不卡| 激情五月婷婷亚洲| 91精品三级在线观看| 99久久99久久久精品蜜桃| 亚洲精品aⅴ在线观看| 精品少妇一区二区三区视频日本电影 | 亚洲欧美成人综合另类久久久| 亚洲伊人色综图| 熟女少妇亚洲综合色aaa.| kizo精华| 久久国产亚洲av麻豆专区| 国产熟女欧美一区二区| 水蜜桃什么品种好| av免费观看日本| 亚洲精品一区蜜桃| 国产激情久久老熟女| 91精品三级在线观看| 一级毛片我不卡| 国产精品 国内视频| 悠悠久久av| 各种免费的搞黄视频| 免费看不卡的av| 午夜福利视频精品| 大话2 男鬼变身卡| 久久精品久久久久久久性| 精品一区二区三区四区五区乱码 | 97在线人人人人妻| 国产激情久久老熟女| 十八禁网站网址无遮挡| 色播在线永久视频| 欧美精品人与动牲交sv欧美| 婷婷色av中文字幕| 亚洲av男天堂| 美女午夜性视频免费| 久久人人爽av亚洲精品天堂| 国产免费现黄频在线看| 老司机影院成人| 久久精品亚洲av国产电影网| 亚洲伊人色综图| svipshipincom国产片| www.av在线官网国产| 老司机影院成人| 街头女战士在线观看网站| 十八禁高潮呻吟视频| 夫妻午夜视频| 啦啦啦 在线观看视频| 免费在线观看视频国产中文字幕亚洲 | 久久人人爽人人片av| 日韩精品有码人妻一区| 天天影视国产精品| 91老司机精品| 欧美日韩一区二区视频在线观看视频在线| 亚洲国产精品成人久久小说| 亚洲美女黄色视频免费看| avwww免费| 亚洲精品国产色婷婷电影| 国产精品.久久久| 下体分泌物呈黄色| 美女主播在线视频| 国产日韩欧美在线精品| 在线观看国产h片| 人人妻人人澡人人爽人人夜夜| 国产精品久久久久成人av| 大香蕉久久成人网| 伊人久久国产一区二区| 欧美少妇被猛烈插入视频| 国产欧美亚洲国产| 欧美国产精品va在线观看不卡| 国产女主播在线喷水免费视频网站| 亚洲熟女毛片儿| 色婷婷av一区二区三区视频| av视频免费观看在线观看| 中文字幕高清在线视频| 亚洲七黄色美女视频| 国产一级毛片在线| 日韩中文字幕视频在线看片| 黄片小视频在线播放| 亚洲欧美清纯卡通| 国产精品成人在线| 国产精品麻豆人妻色哟哟久久|