臺北屋頂 中國臺北

設計單位：平田晃久建筑設計事務所，昌瑜建筑師事務所

結構工程：Envision工程顧問

總承包商：PAUIYAN archiland

場地面積：795平方米

建筑面積：508.50 平方米

總建筑面積：5,881.34 平方米

功能：集合住宅，店鋪

樓層：12+3（屋頂）+3（地下室）

高度：50.60米

結構：混凝土，鋼

設計/ 完成：2013年/ 2017年

攝影：平田晃久建筑設計事務所，PAUIYAN archiland,Dean Cheng

Architect:Akihisa hirata architecture office,Chang yu architecture office

Structural engineer:Envision engineering Consultant

General contractors:PAUIYAN archiland

Site area:795 m2

Built area:508.50 m2

Total floor area:5,881.34 m2

Program:Collective Housing,shop

Floors:12+3 (Roof)+3 (Basement)

Height :50.60 m

Structure : SRC,Steel

Design/ Completed:2013/ 2017

Photography:Akihisa hirata architecture office,PAUIYAN archiland,Dean Cheng

臺北屋頂位于臺北市購物區，是一座12 層的集體住宅。臺灣人設計出各式各樣的居間區，以適應濕熱的氣候。你可以巧妙地利用貫穿整個城市的道路擴建面的簡單環境，看到人們享受吃飯聊天。臺灣人既擁有豐富的生活方式，又充滿21 世紀的新鮮感，有沒有可能考慮建造適合他們的公寓樓？因此，我們并沒有選擇參考基于平面圖上的塔式建筑，而是選擇了傾斜的形狀，同時在對角線上控制范圍，這樣所有的住宅單元都可以有一個大露臺。露臺上覆蓋著屋頂和樹木，在建筑表面創造了一個舒適的三維居間區。

6 米網格剛性鋼筋混凝土結構，覆蓋了一個3 米網格屋頂框架系統。主體結構為混凝土建構，屋頂為輕型鋼結構。屋頂?shù)钠露仁呛愣ǖ模恍韪淖儍A斜的方向，就能做出多種布局。雨水沿梯度方向分布，形成支流狀或管狀。從正面看，屋頂、垂直的排水溝和細細的豎桿，使建筑多了幾分韻律感。換句話說，流動的雨水就是這個建筑的門面。風穿過城市，在并不均勻的表面上柔和地散開來，增強了露臺的舒適性。也最大限度地減少了 “建筑風”的發生。

臺北屋頂是適合21 世紀亞洲的高層建筑原型，在這里流動的水和空氣能夠進入建筑內部。

It is a 12-story collective house built in the shopping area of Taipei City.People in Taiwan have devised various intermediary areas that go well with hot and humid climates in their lives.You can skillfully exploit the simple places on the extension of the road throughout the city and you can see the people enjoying meals and conversation.Isit possible to consider apartment buildings suitable for Taiwanese people who have created such a rich lifestyle but at the same time have a freshness in the 21st century?So we selected not the tower on the reference floor plans but the shape to set back while diagonally limiting the limits so that all the dwellings could have a large terrace.The terrace is covered with roofs and trees,creating a three-dimensional and comfortable intermediate area on the building surface.

The 6 m grid rigid RC structure is covered with a 3 m grid roof frame system.The structure of the main body is RC construction and the roof is a light structure of steel frame structure.The slope of the roof is constant,and changing the direction of the tilt makes a changeable expression.Distribution in gradient direction make branch of rainwater flow,or network.A roof,a vertical gutter and a thin vertical pole give a rhythm to the elevation.In other words,the flow of rainwater is made facade of this architecture.The wind flowing through the city will spread throughout the unevenness surface dispersal and softly,due to enhance the comfort of the terrace.It also minimizes the occurrence of "building wind".

It is a prototype of a high-rise building suitable for Asia in the 21st century where the flow of water and air enters.

構思草圖及實體模型 Sketch & Entity model

分析圖 Analysis chart

戶型平面圖 Unit Plan