• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Combinatorial Synthesis and High-Throughput Characterization of Microstructure and Phase Transformation in Ni-Ti-Cu-V Quaternary Thin-Film Library

    2020-09-05 07:41:38NilAlHsnHuilongHouSuhismitSrkrSigurdThienhusApurvMehtAlfredLudwigIhiroTkeuhi
    Engineering 2020年6期

    Nil M. Al Hsn, Huilong Hou, Suhismit Srkr, Sigurd Thienhus,Apurv Meht, Alfred Ludwig, Ihiro Tkeuhi,*

    a Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA

    b Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA

    c Werkstoffe der Mikrotechnik, Ruhr-Universit?t Bochum, Bochum 44801, Germany

    Keywords:

    Ni-Ti-Cu-V alloys Combinatorial materials science Quaternary alloys Shape memory alloys Thin-film library Elastocaloric cooling Thermoelastic cooling Phase transformation High-throughput characterization Property mapping Machine learning

    A B S T R A C T

    Ni-Ti-based shape memory alloys(SMAs)have found widespread use in the last 70 years,but improving their functional stability remains a key quest for more robust and advanced applications.Named for their ability to retain their processed shape as a result of a reversible martensitic transformation, SMAs are highly sensitive to compositional variations. Alloying with ternary and quaternary elements to finetune the lattice parameters and the thermal hysteresis of an SMA, therefore, becomes a challenge in materials exploration. Combinatorial materials science allows streamlining of the synthesis process and data management from multiple characterization techniques. In this study, a composition spread of Ni-Ti-Cu-V thin-film library was synthesized by magnetron co-sputtering on a thermally oxidized Si wafer. Composition-dependent phase transformation temperature and microstructure were investigated and determined using high-throughput wavelength dispersive spectroscopy, synchrotron X-ray diffraction,and temperature-dependent resistance measurements.Of the 177 compositions in the materials library,32 were observed to have shape memory effect,of which five had zero or near-zero thermal hysteresis.These compositions provide flexibility in the operating temperature regimes that they can be used in. A phase map for the quaternary system and correlations of functional properties are discussed with respect to the local microstructure and composition of the thin-film library.

    1. Introduction

    Shape memory alloys (SMAs) of nickel-titanium (Ni-Ti) are functional materials with thermal (one-way effect, 1-WE) and mechanical (pseudoelasticity, PE) ‘‘memory” [1]. This property,also known as the shape memory effect (SME), is a result of a first-order, diffusionless, and reversible phase transformation between austenite and martensite structures. When cooling from high temperature,phase transformation from austenite to martensite is characterized by the martensite start (Ms) and finish (Mf)temperatures. Similarly, the reverse process is characterized by the austenite start(As)and finish(Af)temperatures.A thermal hysteresis ΔT occurs when there is a difference in the temperature at which 50% of the material is transformed into martensite upon cooling and 50% into austenite upon heating, so that ΔT = Af- Ms[2].Transformation temperatures(Af)range between 0 and 100°C for commercial NiTi alloys with a hysteresis width of 25 to 40 °C[3]. Austenitic and martensitic NiTi structures have cubic B2 and monoclinic B19’ crystal lattices, respectively [1,4,5]. In addition,intermediate structures such as rhombohedral or trigonal Rphase and B19 facilitate geometric compatibility during transformation. Phases and crystal lattices present in the Ni-Ti system are extensively studied, but undesirable functional and structural properties including the strong dependence of transformation temperatures on composition and, hence, tight control of synthesis parameters present a significant challenge in their adoption into new technology [6-10]. Nonetheless, Ni-Ti SMAs enjoy widespread applications ranging from actuators, stents, orthodontics,and sensors to eco-friendly refrigeration and even fashion[11-17].

    The transformation temperature regime is a critical parameter in determining the application of SMAs along with their functional fatigue. The addition of ternary and quaternary alloying elements enables the modification and fine-tuning of the material transformation temperature for specific applications [4,9,18]. Combinatorial materials science merges the synthesis of thin films with high-throughput characterization, which allows access to many compounds covering a substantial compositional space with different stoichiometries under identical conditions. Hence, it enables the rapid discovery and development of new materials with targeted properties [19].

    In this study,we report on a systematic workflow for the rapid determination of composition-structure-property relationships using combinatorial synthesis and high-throughput experimentation.We report on new Ni-Ti-Cu-V quaternary thin-film compositions having near-zero thermal hysteresis, as determined by highthroughput resistance measurements. Compositional and structural characterization was carried out with wavelength dispersive spectroscopy and high-throughput synchrotron X-ray diffraction(HiTp-XRD). A composition-phase map for the quaternary alloy was developed through automated data analysis employing hierarchical clustering techniques. This work validates theoretical predictions and builds on experimental efforts in developing new SMAs [20,21].

    2. Experimental approach

    Experiments were carried out with the long flat edge of the wafer positioned at the bottom so that the first set of five sample pads,labeled 1-5 from left to right,were parallel to the edge.This eased and streamlined data management.

    2.1. Thin-film synthesis with magnetic sputtering

    A quaternary thin-film composition spread for Ni-Ti-Cu-V between 150 and 250 nm thick was deposited on a 3 in(76.2 mm)thermally oxidized(2 μm SiO2)silicon(Si)wafer(thickness 400 μm, IWS; International Wafer Service, Inc., USA), in an ultrahigh-vacuum (5×10-7torr, 1 torr=133.32237 Pa), magnetron sputtering system at room temperature. High-purity(99.98%) elemental targets with a diameter of 1.5 in (38.1 mm)were sputtered using DC (direct current from Seren IPS Inc., USA)and RF (radio frequency from Advanced Energy Industries, Inc.,USA) power sources with an ultrahigh purity argon (Ar)(99.9997%; Airgas, USA) pressure of 5 × 10-3torr. Each wafer was covered with a patterned Si mask to delineate 177 individual compositions evenly across the wafer at a Δx, Δy of 4.5 mm. The substrate was water cooled to avoid crystallization during sputter deposition and to maintain low temperatures. The resulting film was annealed in a vacuum at 500 °C for 1 h following the process reported in the literature [21]. Deposition rates were determined for each element used in this work under a given power source for a preset time and are listed in Table S1 of the Supplementary data. Thickness was measured using atomic force microscopy(AFM). Based on the calibrated deposition rates and the density of each element, the required power ratio to achieve a desired composition was determined and is listed in Table S2 of the Supplementary data. The total time for the synthesis and annealing of a thin-film library is 2 h before it is ready for characterization.

    2.2. Chemical composition determination

    Composition variation in the thin-film library was determined using wavelength dispersive X-ray (WDX) analysis in an electron probe microanalyzer (EPMA) JXA 8900R Microprobe (Microprobe,USA),with an acceleration voltage of 15 kV.Standardization of references was carried out with pure metal references and compositions were determined to be within an experimental error of <0.3 at%.

    2.3. Crystal structure analysis

    Structural information was obtained at room temperature by collecting two-dimensional (2D) X-ray diffraction (XRD) patterns on the combinatorial library at beamline 1-5 at the Stanford Synchrotron Radiation Lightsource (SSRL). The experiment was performed with 14.99 keV energy collimated to approximately 0.3 mm × 0.3 mm beam size and a wavelength of 0.82657 ?(8.2657 × 10-9m). MarCCD detector (Rayonix, L.L.C., USA) was used to collect the data at an exposure rate of 30 s. To minimize the influence of diffraction from the silicon substrate, the library was scanned with a small grazing incidence angle of 1°-2°. The grazing incidence geometry resulted in an approximate 3 mm probe footprint on the library. An automated algorithm was used to measure the entire library with a step size of 4.5 mm.

    For data analysis, the geometric parameters of the 2D detector,such as the direct beam position, tilting, rotation, and sample-todetector distance, were extracted from a measuring-standard LaB6powder pattern. These parameters were used to transform the initial raw images that were acquired as a function of Q and χ in the diffraction coordinate into one-dimensional (1D) diffraction patterns by integrating and normalizing over the χ angle.The Bragg angle (2θ) is related to the scattering vector (Q) by the relationship Q = 4×π×sin(θ)/λ, with wavelength (λ) helping to generate a more traditional 1D spectrum (intensity vs 2θ).

    2.4. Characterization of transformation temperature

    Film resistance as a function of temperature,R(T),was measured to determine the transformation temperature, as crystal structure changes correspond with measurable electrical and magnetic changes.Resistance was measured using a four-point probe method described by Van der Pauw in a custom-built high-throughput test stand with an automated platform of five sets of four-point probes[22,23]. The spacing between the probe tips was 500 μm and the test stand was enclosed in a box purged with nitrogen (N2) gas.Measurements were performed between -40 and 120 °C with a heating/cooling rate of 5°C·min-1and 50 mA source current.

    2.5. Cluster analysis of high-throughput data

    It was applied to the diffraction patterns using CombiView(Anritsu, Japan), which is a MATLAB-supported data visualization platform developed by the Takeuchi group.

    3. Results and discussions

    In this work, we investigated the influence of composition on the structure and transformation property of quaternary[Ni36-Ti52-Cu12](100-x)Vxalloys in thin-film form.High-throughput characterization of the composition and crystal structure was performed using wavelength dispersive spectroscopy and synchrotron X-ray diffraction, respectively. Transformation behavior was characterized using resistance measurements as a function of temperature. Machine learning using a MATLAB-based visualization platform CombiView developed in-house was used to sort compositions by diffraction patterns, and therefore structures,into clusters in order to rapidly identify constituent phases and determine phase boundaries.

    3.1. Chemical composition

    Automated WDS measurements were carried out on all 177 samples in the materials library.Fig.1 shows the composition variation across the wafer,with atomic percent ranges for the four elements as follows:Ni from 21.3 at%to 58.3 at%;Ti from 23.3 at%to 57.5 at%;copper (Cu) from 12.9 at% to 24.9 at%; and vanadium (V) from 2.9 at% to 6.2 at%. The targeted composition Ti41.8Ni37.5Cu16.0V4.6was obtained in the center.Distribution of the elements corresponds with the elemental target gun positions inside the sputtering chamber.

    3.2. Transformation temperature determination from temperaturedependent resistance measurements

    The property of interest for this library was SME determined from phase transformation curves. These were obtained by carrying out temperature-dependent resistance measurements. Phase transformation temperatures of austenitic finish (Af), and martensitic start (Ms) were determined using the tangent method [21].Phase transformation activity for each composition as a function of wafer position in the thin-film library is shown in Fig.2(a).Regions of transformation indicated by curves shaped as variations of ‘‘U” and ‘‘2” were observed to be limited to the right side of the wafer. The left-half portion can be divided into two main regions:The first region encompassed many compositions in the center of the wafer with non-transforming, linear behavior; the second region was limited to compositions in the far left showing nontransforming and nonlinear behavior without clear curves. Positions and compositions clustered by SME activity are shown in Figs. 2(b) and (c), respectively, where there are reversible phase transformations with nonlinear R(T) curves (yellow, teal, pink),non-transforming regions with linear curves in blue,and nonlinear curves in green and red. Phase transformation parameters of thermal hysteresis(ΔT=Af-Ms),austenitic finish(Af),and martensitic start (Ms) temperatures are shown in Fig.3. All compositions with phase transformation behavior are listed in Table 1. SME was observed in 32 compositions, with five compositions having zero or near-zero thermal hysteresis and one composition having a maximum ΔT of 17.2 °C. The elemental range for compositions having SME was observed as follows: c(Ti) = 49.4 at% to 57.5 at%;c(Ni) = 21.3 at% to 30.9 at%; c(Cu) = 13.8 at% to 21.6 at%; and c(V)=4.1 at%to 6.2 at%.The boundaries of the temperature regime where transformations to austenite occurred were observed to be centered around 13°C to 29°C while the martensitic start temperature was slightly reduced between 10°C and 20°C.Thermal hysteresis of ≤4 °C was observed in 19 compositions.

    Fig.1. Elemental distribution of(a)Ni,(b)Ti,(c)Cu,and(d)V on a 3 in Si wafer.The color scale for each element indicates composition in atomic percent from high to low indicated by the progression from red to blue. The wafer was oriented with the long flat edge at the bottom.

    Fig.2. (a)Temperature-dependent resistance R(T)curves for[Ni36-Ti52-Cu12](100-x)Vx showing regions of transformation.Reversible transformation is observed on the right portion of the wafer as indicated by broad ‘‘U”- and ‘‘2”-shaped curves. Heating and cooling curves are indicated by red and blue colors, respectively. (b) Grouping by SME activity of wafer positions and (c) compositions projected on a ternary Cu-Ni-Ti plot, where V is between 2.9 at% and 6.2 at%.

    Fig.3. Ni-Ti-Cu-V compositions having SME projected onto Cu-Ni-Ti ternary plots with the atomic concentration of V held constant between 2.9 at% and 6.2 at%.Phase transformation parameters of (a) austenitic finish (Af) temperature,(b) martensitic start (Ms) temperature, and (c) thermal hysteresis ΔT = Af - Ms.Color scale bars from blue to red indicate high to low temperatures.

    3.3. Crystal structure and phase identification

    The data visualization platform CombiView allows the linking of the sample position on the wafer with its corresponding composition and diffraction pattern. The structural phase diagram was determined through a hierarchical cluster analysis of the diffraction patterns, as shown in Fig.4. A Pearson correlation coefficient cluster analysis resulted in six clusters for the Ni-Ti-Cu-V materials library.Table 2 lists the crystal structure and space group of the phases found in the library. For non-transforming compositions,both linear and nonlinear R(T) curves were observed, which were attributed to double-phase and low-symmetry crystal structures.The default structure type is a cubic phase, unless specified otherwise under prototype.

    3.4. Assessment of the thin-film phase diagram

    Results for the transformation properties and phases identified in the present study are listed in Table 1 and Table 2,respectively.Martensitic phase transformation determined from resistance measurement shows that the shape memory effect is limited to the Ti-rich region. SME variation changes with Ni and V content such that SME is observed to be between 21.3 at% and 33.4 at%Ni and between 4.0 at%and 6.2 at%V,respectively.This is in agreement with values reported in bulk by Frenzel et al.[9]and Schmidt et al. [26].

    Clustering diffraction patterns using the Pearson correlation coefficient model match the grouping of compositions based on the shape memory behavior. Cubic NiTi with a mixture of cubicNi0.25Cu0.75and tetragonal CuNiTi phases were found in Ti-rich regions with the highest V content. The increased replacement of Ni by V was observed to stabilize the transformable cubic and tetragonal martensite variants(Fig.5).A mix of cubic crystal structure having a prototype formula (Ti0.64Zr0.36)Ni and hexagonal Ti(Cu0.053Ni0.947)3made up the majority of the composition space covered in this materials library having no transformation. For Ni-rich regions,orthorhombic phases of TiNi2Cu/TiNi0.8Cu0.2mixed with hexagonal (Ti0.67V0.33)Ni3were identified as Ni content was reduced.

    Table 1 Thermal hysteresis, austenitic finish, and martensitic start temperatures for quaternary-Ni-Ti-Cu-V SMAs by ascending Ti content.

    Fig.4. Hierarchical cluster analysis of diffraction patterns for a quaternary thin-film library covering the range [Ni36-Ti52-Cu12](100-x)Vx. The MATLAB-based data visualization platform CombiView allows linking of the sample position on the wafer with its composition and diffraction pattern, which is used to perform hierarchical cluster analysis to create a structural phase diagram.(a)177 diffraction patterns with an x-axis of 2θ between 22°and 100°;(b)pearson correlation coefficient cluster analysis model showing grouping of XRD patterns based on similarities in peak positions;(c)composition space covered in this study as projected on a ternary plot of Cu-Ni-Ti with constant V identifying structural phase boundaries as delineated from hierarchical clustering shown in (b); (d) grouping by position on wafer (long flat edge at bottom).

    Table 2 Overview of crystal structures identified in the Ni-Ti-Cu-V materials library.

    The addition of Cu to binary NiTi such that Cu replaces Ni has been shown to decrease the misfit between austenite and martensitic lattices.This translates to a slight decrease in Msand reduced width of the thermal hysteresis,which,when combined,improves fatigue properties. The influence of the addition of V as a ternary element to NiTi was reported by Frenzel et al. [9], who demonstrated a reduction in Ms. In addition, the mechanical behavior was stabilized so that a small residual strain was maintained,compared with binary NiTi. Ni-Ti-Cu-V has been demonstrated for application as an elastocaloric material that is able to fulfill the potential of using Ni45Ti47.25Cu5V2.75in ribbon form [26] and Ni50Ti45.3V4.7in a square prismatic form [27]. The identification of new compositions with reduced thermal hysteresis is a starting point for scale-up experiments to determine their long-term robustness through mechanical testing.

    3.5. Effect of temperature cycling on film resistance

    Fig.5. Selected diffraction patterns representing the six clusters identified by the Pearson correlation coefficient clustering model. Substitution of Ni by V increases with distance from the abscissa, reflecting a shift in the non-transforming orthorhombic and hexagonal phase mixture to transformable cubic and tetragonal crystal structures.Patterns are offset for clarity.

    Fig.6. Thin-film sheet resistance at room temperature(a)before and(b)after 84 temperature cycles between-40 and 120°C.Post-cycling resistance was mapped using the same scale as pre-cycling;values outside of this range are indicated by colorless boxes.(c)Difference in resistance from(a)and(b).The color scale from red to blue indicates high to low values, respectively. The wafer was oriented with the long flat edge at the bottom.

    Thermal stability over many cycles is an important consideration in the optimization of heat transfer and the determination of functional fatigue, specifically, when using SMAs for elastocaloric cooling [28]. Film sheet resistance at room temperature (Fig.6(a))was measured prior to cycling the library between -40 and 120 °C for temperature-dependent resistance measurements. The effect of temperature cycling on film resistance was evaluated since the library was subjected to 84 temperature cycles,and is shown in Fig.6(b)with the difference mapped in Fig.6(c).While the SME was stable, as determined from the observation of transformation in Fig.2, an overall reduction in sheet resistance was observed. XRD measurements collected post-thermal cycling show little to no change in diffraction patterns, thereby suggesting good structural stability(data not shown).

    4. Conclusions

    In this work,we report on the combinatorial thin-film synthesis and high-throughput characterization of a quaternary alloy. We provide an overview of the dependence of material properties on composition and structure through composition-structureproperty maps. The Ni-Ti-Cu-V materials library we synthesized spans a composition region that has shape memory behavior. A strong correlation can be made between the microstructure and phase transformation property and, hence, composition. SMA effect is prominent in the Ti-rich region,with a significant number of compositions having near-zero thermal hysteresis. Increasing addition of V was observed to stabilize the mixture of cubic and tetragonal phases identified in compositions exhibiting SMA behavior. For non-transforming compositions, both linear and nonlinear R(T) curves were observed, which were attributed to double-phase and low-symmetry crystal structures. SME and thermal hysteresis were stable over close to a hundred cycles.This work explored and validated the use of V as a fourth element in fine-tuning the operating temperature of a Ni-Ti-Cu ternary alloy in the ambient temperature regime for elastocaloric cooling applications. Work remains to be undertaken to understand the limits of V addition on the enhancement of efficiency and functional stability of the elastocaloric effect in NiTi alloys.

    Acknowledgements

    The author thanks Tieren Gao, Peer Decker, Alan Savan, and Manfred Wuttig for fruitful discussions. The authors gratefully acknowledge funding support by the National Science Foundation Graduate Research Fellowship Program (DGE 1322106).

    Compliance with ethics guidelines

    Naila M. Al Hasan, Huilong Hou, Suchismita Sarkar, Sigurd Thienhaus, Apurva Mehta, Alfred Ludwig, and Ichiro Takeuchi declare that they have no conflict of interest or financial conflicts to disclose.

    Appendix A. Supplementary data

    Supplementary data to this article can be found online at https://doi.org/10.1016/j.eng.2020.05.003.

    国产精品久久久久成人av| 日韩av免费高清视频| 久久久久国产网址| 国产精品久久久久久久久免| 日本爱情动作片www.在线观看| 久久久久久久久久久久大奶| 亚洲国产精品国产精品| av天堂久久9| 大话2 男鬼变身卡| 99久久人妻综合| 亚洲国产精品一区三区| 国产精品成人在线| 成人午夜精彩视频在线观看| 在线观看www视频免费| 黑人欧美特级aaaaaa片| 最新的欧美精品一区二区| 18+在线观看网站| 久热久热在线精品观看| 啦啦啦视频在线资源免费观看| 免费观看a级毛片全部| 国产一区二区三区综合在线观看| 欧美成人精品欧美一级黄| 国产成人av激情在线播放| 久久精品国产自在天天线| 亚洲欧洲国产日韩| 日韩不卡一区二区三区视频在线| 午夜福利视频在线观看免费| av国产精品久久久久影院| 中文字幕人妻熟女乱码| 成年人午夜在线观看视频| 一本—道久久a久久精品蜜桃钙片| 国产白丝娇喘喷水9色精品| 国产成人欧美| 性色avwww在线观看| 国产精品一区二区在线不卡| 一区二区三区精品91| 国产欧美亚洲国产| 天天躁狠狠躁夜夜躁狠狠躁| 欧美日韩精品网址| 啦啦啦在线免费观看视频4| 女人精品久久久久毛片| a级毛片在线看网站| 成人免费观看视频高清| 久久狼人影院| 亚洲美女搞黄在线观看| a级毛片黄视频| 精品国产国语对白av| 亚洲精品国产色婷婷电影| 日韩制服骚丝袜av| 91午夜精品亚洲一区二区三区| 肉色欧美久久久久久久蜜桃| 国产探花极品一区二区| 天天影视国产精品| 亚洲精品国产av蜜桃| a级毛片黄视频| 久久精品国产综合久久久| 亚洲情色 制服丝袜| 日日撸夜夜添| 在线观看免费日韩欧美大片| 黄色配什么色好看| 亚洲视频免费观看视频| 丁香六月天网| 18禁动态无遮挡网站| 少妇人妻精品综合一区二区| 天天躁日日躁夜夜躁夜夜| 校园人妻丝袜中文字幕| 性少妇av在线| 超色免费av| 国产精品av久久久久免费| 99re6热这里在线精品视频| 国产精品香港三级国产av潘金莲 | 99热全是精品| 国产精品女同一区二区软件| 亚洲综合色网址| 91国产中文字幕| 熟女av电影| 精品亚洲乱码少妇综合久久| 亚洲欧美日韩另类电影网站| 91久久精品国产一区二区三区| 国产精品成人在线| 久久99一区二区三区| 老汉色av国产亚洲站长工具| 少妇的逼水好多| 日本91视频免费播放| 亚洲av综合色区一区| 精品卡一卡二卡四卡免费| 亚洲精品久久午夜乱码| 国产精品欧美亚洲77777| 精品一区二区三区四区五区乱码 | 成人亚洲精品一区在线观看| 日本91视频免费播放| 日韩制服丝袜自拍偷拍| 9热在线视频观看99| 久久精品久久精品一区二区三区| av网站在线播放免费| 国产极品天堂在线| 性高湖久久久久久久久免费观看| 巨乳人妻的诱惑在线观看| 热re99久久精品国产66热6| 性色avwww在线观看| 久久久精品94久久精品| 99香蕉大伊视频| 满18在线观看网站| 在线精品无人区一区二区三| 国产av一区二区精品久久| 乱人伦中国视频| 国产亚洲一区二区精品| 久久国内精品自在自线图片| 制服人妻中文乱码| 少妇猛男粗大的猛烈进出视频| 嫩草影院入口| 国产片内射在线| 国产成人91sexporn| 久久精品亚洲av国产电影网| 1024视频免费在线观看| 男的添女的下面高潮视频| 亚洲国产欧美日韩在线播放| 日韩一区二区三区影片| 国产精品免费视频内射| 美女国产高潮福利片在线看| 老司机影院成人| 精品久久久精品久久久| 啦啦啦中文免费视频观看日本| 最近中文字幕高清免费大全6| 亚洲欧洲精品一区二区精品久久久 | 天天躁日日躁夜夜躁夜夜| 99久久综合免费| 大片免费播放器 马上看| 色播在线永久视频| 人人妻人人添人人爽欧美一区卜| 青春草亚洲视频在线观看| 亚洲精品国产色婷婷电影| 青青草视频在线视频观看| 黄色怎么调成土黄色| 久久青草综合色| 黄色怎么调成土黄色| 久久久久久久久免费视频了| 国产精品女同一区二区软件| 国产精品女同一区二区软件| 国产成人免费无遮挡视频| 日本爱情动作片www.在线观看| 可以免费在线观看a视频的电影网站 | 极品少妇高潮喷水抽搐| 日韩制服丝袜自拍偷拍| 99久久人妻综合| 久久精品国产亚洲av天美| 韩国av在线不卡| 日韩中文字幕欧美一区二区 | 免费高清在线观看日韩| 精品人妻熟女毛片av久久网站| 1024香蕉在线观看| a级片在线免费高清观看视频| 国产不卡av网站在线观看| 亚洲欧美成人精品一区二区| 午夜免费男女啪啪视频观看| 亚洲视频免费观看视频| 亚洲,欧美,日韩| 女人久久www免费人成看片| 黑丝袜美女国产一区| 欧美最新免费一区二区三区| 五月开心婷婷网| 黄色一级大片看看| 在线精品无人区一区二区三| 大香蕉久久网| 午夜福利在线免费观看网站| 亚洲经典国产精华液单| 久久毛片免费看一区二区三区| 欧美日韩视频高清一区二区三区二| 黄片小视频在线播放| 成人手机av| 在线观看美女被高潮喷水网站| 亚洲欧洲国产日韩| 国产一区二区三区av在线| 国产欧美日韩综合在线一区二区| 精品国产一区二区久久| 色婷婷av一区二区三区视频| 啦啦啦在线观看免费高清www| 亚洲av福利一区| 国产男人的电影天堂91| 亚洲综合色网址| 搡老乐熟女国产| 成人影院久久| 一区二区三区四区激情视频| 亚洲婷婷狠狠爱综合网| 丝袜脚勾引网站| 国产一级毛片在线| 久久精品国产鲁丝片午夜精品| 日本欧美视频一区| 蜜桃在线观看..| 尾随美女入室| 亚洲中文av在线| 免费女性裸体啪啪无遮挡网站| 欧美日韩一区二区视频在线观看视频在线| 国产成人精品久久二区二区91 | 一区二区日韩欧美中文字幕| 99国产精品免费福利视频| 久久久久久久久久人人人人人人| 男女免费视频国产| 国产黄色免费在线视频| 一级片免费观看大全| 看非洲黑人一级黄片| 精品少妇久久久久久888优播| 狂野欧美激情性bbbbbb| 日日啪夜夜爽| 美女午夜性视频免费| a级片在线免费高清观看视频| 女人久久www免费人成看片| 午夜福利在线免费观看网站| 欧美日韩一区二区视频在线观看视频在线| 精品人妻熟女毛片av久久网站| 国产精品av久久久久免费| 成年美女黄网站色视频大全免费| 亚洲精品日韩在线中文字幕| 观看av在线不卡| 国产精品人妻久久久影院| 一级片'在线观看视频| 久久午夜综合久久蜜桃| 国精品久久久久久国模美| 婷婷色综合www| 下体分泌物呈黄色| 韩国高清视频一区二区三区| 国产乱人偷精品视频| 亚洲精品久久成人aⅴ小说| 亚洲男人天堂网一区| 美女高潮到喷水免费观看| av.在线天堂| 亚洲精品日韩在线中文字幕| 又大又黄又爽视频免费| 精品一区二区免费观看| 午夜久久久在线观看| 国产精品女同一区二区软件| 99九九在线精品视频| 一二三四在线观看免费中文在| 涩涩av久久男人的天堂| 午夜福利乱码中文字幕| www.av在线官网国产| 成年美女黄网站色视频大全免费| 亚洲一区二区三区欧美精品| 免费在线观看黄色视频的| 亚洲成国产人片在线观看| 制服人妻中文乱码| 国产一区二区 视频在线| 一级毛片我不卡| 狂野欧美激情性bbbbbb| 久久久久久久大尺度免费视频| av在线老鸭窝| 另类亚洲欧美激情| 老司机影院毛片| 国产精品偷伦视频观看了| 桃花免费在线播放| 国产精品女同一区二区软件| 国产在视频线精品| 啦啦啦啦在线视频资源| 成年av动漫网址| 久热这里只有精品99| 国产探花极品一区二区| 最近中文字幕2019免费版| 久久99一区二区三区| 精品国产乱码久久久久久小说| 日韩av免费高清视频| 91在线精品国自产拍蜜月| 在线 av 中文字幕| 欧美成人午夜免费资源| 国产又色又爽无遮挡免| 90打野战视频偷拍视频| 免费高清在线观看视频在线观看| 精品久久久久久电影网| 制服人妻中文乱码| 老司机亚洲免费影院| 天天躁夜夜躁狠狠躁躁| 热99久久久久精品小说推荐| 大陆偷拍与自拍| 免费观看a级毛片全部| 国产精品 欧美亚洲| 国产免费一区二区三区四区乱码| 亚洲欧美日韩另类电影网站| av在线app专区| 国产成人精品福利久久| 两性夫妻黄色片| 一边亲一边摸免费视频| 99九九在线精品视频| 国产精品久久久久久精品古装| 日本欧美视频一区| 精品酒店卫生间| 免费人妻精品一区二区三区视频| 可以免费在线观看a视频的电影网站 | 中文字幕另类日韩欧美亚洲嫩草| 亚洲色图 男人天堂 中文字幕| 国产男人的电影天堂91| 日日摸夜夜添夜夜爱| 国产精品国产三级国产专区5o| 日本欧美视频一区| 99精国产麻豆久久婷婷| 日本av免费视频播放| 日本猛色少妇xxxxx猛交久久| 欧美 亚洲 国产 日韩一| 欧美成人精品欧美一级黄| 成年动漫av网址| 大陆偷拍与自拍| 欧美人与性动交α欧美精品济南到 | 亚洲av成人精品一二三区| 成人影院久久| 久久久久精品性色| 日韩制服丝袜自拍偷拍| 久久久欧美国产精品| 熟女电影av网| 亚洲欧洲国产日韩| 综合色丁香网| 水蜜桃什么品种好| 欧美精品高潮呻吟av久久| 九草在线视频观看| av在线观看视频网站免费| 啦啦啦在线观看免费高清www| 国产精品久久久久成人av| 日韩电影二区| 欧美精品一区二区大全| 免费播放大片免费观看视频在线观看| 日本猛色少妇xxxxx猛交久久| 日韩免费高清中文字幕av| 欧美亚洲日本最大视频资源| 国产xxxxx性猛交| 国产av精品麻豆| 国产精品.久久久| 精品国产乱码久久久久久小说| 久久影院123| 97人妻天天添夜夜摸| 91成人精品电影| 精品酒店卫生间| 亚洲国产精品一区二区三区在线| 国产国语露脸激情在线看| 美女xxoo啪啪120秒动态图| 久久久精品区二区三区| 国产又色又爽无遮挡免| 老鸭窝网址在线观看| 亚洲综合色网址| 免费日韩欧美在线观看| 免费黄频网站在线观看国产| 国产av精品麻豆| 菩萨蛮人人尽说江南好唐韦庄| 国产av国产精品国产| 建设人人有责人人尽责人人享有的| 午夜福利乱码中文字幕| 男女下面插进去视频免费观看| 日韩中文字幕视频在线看片| 久久午夜福利片| 国产爽快片一区二区三区| 国产在线免费精品| 亚洲美女黄色视频免费看| 亚洲国产精品一区三区| 麻豆精品久久久久久蜜桃| 人妻 亚洲 视频| 视频在线观看一区二区三区| 欧美另类一区| 亚洲五月色婷婷综合| 久久久欧美国产精品| 视频在线观看一区二区三区| 精品一区在线观看国产| 麻豆乱淫一区二区| 亚洲精品久久成人aⅴ小说| 永久免费av网站大全| 熟女少妇亚洲综合色aaa.| 一本大道久久a久久精品| 免费黄频网站在线观看国产| 欧美日韩一区二区视频在线观看视频在线| 日本vs欧美在线观看视频| av卡一久久| 纯流量卡能插随身wifi吗| 欧美激情极品国产一区二区三区| 街头女战士在线观看网站| 黄片播放在线免费| 亚洲精品在线美女| 久久鲁丝午夜福利片| 美女主播在线视频| 国产成人a∨麻豆精品| 亚洲av在线观看美女高潮| 黑丝袜美女国产一区| 极品人妻少妇av视频| 少妇猛男粗大的猛烈进出视频| 99久久人妻综合| 丝袜美腿诱惑在线| 国产精品人妻久久久影院| 老司机影院成人| 日韩一区二区视频免费看| 一级片免费观看大全| 国产日韩一区二区三区精品不卡| 日韩中文字幕欧美一区二区 | 777米奇影视久久| 免费在线观看视频国产中文字幕亚洲 | 丝袜美足系列| 丁香六月天网| 国产免费福利视频在线观看| 午夜激情久久久久久久| 国产黄色视频一区二区在线观看| 日韩电影二区| 免费高清在线观看视频在线观看| 欧美日韩视频高清一区二区三区二| 免费看av在线观看网站| 欧美日本中文国产一区发布| 人人妻人人澡人人看| 亚洲精品国产av成人精品| 午夜影院在线不卡| 男的添女的下面高潮视频| 中文字幕最新亚洲高清| 婷婷色av中文字幕| 五月开心婷婷网| 十分钟在线观看高清视频www| a级毛片黄视频| 18禁国产床啪视频网站| 又大又黄又爽视频免费| av电影中文网址| h视频一区二区三区| 大香蕉久久成人网| 高清不卡的av网站| 新久久久久国产一级毛片| 大话2 男鬼变身卡| 欧美少妇被猛烈插入视频| 亚洲成人一二三区av| 久久久久久久久久久免费av| 免费不卡的大黄色大毛片视频在线观看| 亚洲欧美中文字幕日韩二区| 人妻一区二区av| 日韩精品有码人妻一区| 亚洲精品国产av成人精品| 久久这里有精品视频免费| 91aial.com中文字幕在线观看| 久久国产亚洲av麻豆专区| 女人高潮潮喷娇喘18禁视频| 大话2 男鬼变身卡| 丰满迷人的少妇在线观看| 亚洲国产成人一精品久久久| 丝袜美腿诱惑在线| 免费av中文字幕在线| 蜜桃国产av成人99| 亚洲成人av在线免费| 国产男人的电影天堂91| 一二三四在线观看免费中文在| 亚洲精品美女久久久久99蜜臀 | 精品99又大又爽又粗少妇毛片| 日本-黄色视频高清免费观看| 国产视频首页在线观看| 超碰97精品在线观看| 黑丝袜美女国产一区| 欧美另类一区| 国产精品久久久久久久久免| 国产精品 国内视频| 少妇猛男粗大的猛烈进出视频| 国产成人午夜福利电影在线观看| 国产黄色免费在线视频| 国产1区2区3区精品| 成年女人在线观看亚洲视频| 男人操女人黄网站| 亚洲国产最新在线播放| 青春草视频在线免费观看| 亚洲国产色片| 国产爽快片一区二区三区| 老司机影院毛片| www.熟女人妻精品国产| 纯流量卡能插随身wifi吗| 制服丝袜香蕉在线| 天堂8中文在线网| 一个人免费看片子| 青草久久国产| 春色校园在线视频观看| 国产av一区二区精品久久| 免费在线观看黄色视频的| 最近手机中文字幕大全| 国产午夜精品一二区理论片| 日本wwww免费看| 亚洲精品日本国产第一区| 国产在线视频一区二区| 国产97色在线日韩免费| 人妻系列 视频| 丝袜美腿诱惑在线| 久久午夜综合久久蜜桃| 精品人妻一区二区三区麻豆| 亚洲精品,欧美精品| 我要看黄色一级片免费的| 国产一区二区三区综合在线观看| 国产激情久久老熟女| 国产一级毛片在线| 欧美xxⅹ黑人| 高清不卡的av网站| 亚洲国产看品久久| 国产熟女午夜一区二区三区| 人妻人人澡人人爽人人| 欧美黄色片欧美黄色片| 亚洲av男天堂| 蜜桃国产av成人99| 最近最新中文字幕大全免费视频 | 99国产精品免费福利视频| 色婷婷av一区二区三区视频| 蜜桃国产av成人99| 成人毛片a级毛片在线播放| 少妇猛男粗大的猛烈进出视频| 国产精品香港三级国产av潘金莲 | 国产深夜福利视频在线观看| 欧美亚洲 丝袜 人妻 在线| 精品久久久精品久久久| 欧美+日韩+精品| 夫妻午夜视频| 日本91视频免费播放| 少妇被粗大猛烈的视频| 9热在线视频观看99| 久久久久久久久久人人人人人人| 人人澡人人妻人| 日韩电影二区| 久久这里只有精品19| 亚洲成人一二三区av| 男女啪啪激烈高潮av片| 性色avwww在线观看| 久久鲁丝午夜福利片| 久久影院123| 日韩一区二区视频免费看| 99久久中文字幕三级久久日本| 精品99又大又爽又粗少妇毛片| 超色免费av| 97人妻天天添夜夜摸| 丝袜美腿诱惑在线| 久久 成人 亚洲| 国产精品不卡视频一区二区| 2018国产大陆天天弄谢| 丁香六月天网| 亚洲av成人精品一二三区| 欧美亚洲日本最大视频资源| 午夜日本视频在线| 老司机影院成人| 免费观看av网站的网址| 亚洲成人手机| 国产一区二区三区综合在线观看| 中文字幕最新亚洲高清| 久热这里只有精品99| 七月丁香在线播放| 国产深夜福利视频在线观看| 五月伊人婷婷丁香| 三级国产精品片| 日本-黄色视频高清免费观看| 大片免费播放器 马上看| 亚洲精品美女久久久久99蜜臀 | 亚洲人成网站在线观看播放| 大片电影免费在线观看免费| 日本91视频免费播放| 性少妇av在线| 亚洲少妇的诱惑av| 久久精品久久久久久噜噜老黄| 成人二区视频| 在线观看免费日韩欧美大片| 一二三四在线观看免费中文在| 国产免费福利视频在线观看| 精品久久久精品久久久| 亚洲成色77777| 最近中文字幕高清免费大全6| 国产伦理片在线播放av一区| 97在线视频观看| 午夜免费观看性视频| 国产成人精品婷婷| 免费少妇av软件| 中文字幕色久视频| 黑人巨大精品欧美一区二区蜜桃| av在线观看视频网站免费| 九色亚洲精品在线播放| 成年美女黄网站色视频大全免费| 亚洲国产欧美网| 女性生殖器流出的白浆| 久久久久久久精品精品| 亚洲视频免费观看视频| 国产精品欧美亚洲77777| 一区福利在线观看| 亚洲美女视频黄频| 国产精品久久久久久久久免| 国产精品无大码| 国产亚洲一区二区精品| 中文字幕亚洲精品专区| 久久久精品94久久精品| 少妇精品久久久久久久| 一级毛片 在线播放| 欧美成人午夜免费资源| 亚洲av欧美aⅴ国产| 国产精品嫩草影院av在线观看| 亚洲精品一二三| xxxhd国产人妻xxx| 久久久久久人妻| 91午夜精品亚洲一区二区三区| 亚洲欧美中文字幕日韩二区| 纵有疾风起免费观看全集完整版| 亚洲色图综合在线观看| 欧美激情极品国产一区二区三区| xxxhd国产人妻xxx| 国产精品香港三级国产av潘金莲 | 日本av手机在线免费观看| 99re6热这里在线精品视频| 国产综合精华液| 国产野战对白在线观看| 免费在线观看黄色视频的| 18禁动态无遮挡网站| 最近最新中文字幕大全免费视频 | 妹子高潮喷水视频| 人体艺术视频欧美日本| 丰满少妇做爰视频| 国产一区二区三区综合在线观看| 国产一区二区 视频在线| 国产伦理片在线播放av一区| 国产一区亚洲一区在线观看| 免费黄频网站在线观看国产| 日韩中字成人| 在线免费观看不下载黄p国产| 国产成人精品久久久久久| 啦啦啦视频在线资源免费观看| 亚洲第一av免费看| 一级片'在线观看视频| 国产xxxxx性猛交| 视频区图区小说| 日日啪夜夜爽| 26uuu在线亚洲综合色| 精品99又大又爽又粗少妇毛片| 狠狠婷婷综合久久久久久88av|