• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Integrated supersonic wind tunnel nozzle

    2019-12-28 07:53:34JunmouSHENJingngDONGRuiquLIJingZHANGXingCHENYongmingQINHndongMA
    CHINESE JOURNAL OF AERONAUTICS 2019年11期

    Junmou SHEN, Jingng DONG, Ruiqu LI, Jing ZHANG, Xing CHEN,Yongming QIN, Hndong MA

    a China Academy of Aerospace Aerodynamics, Beijing 100074, China

    b School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Manchester M1 7DN, UK

    KEYWORDS

    AbstractIn supersonic wind tunnels, the airflow at the exit of a convergent-divergent nozzle is affected by the connection between the nozzle and test section, because the connection is a source of disturbance for supersonic flow and the source of disturbance generated by this disturbance propagates downstream. In order to avoid the disturbance, the test can only be carried out in the rhombus area.However,for the supersonic nozzle,the rhombus region is small,limiting the size and attitude angle of the test model.An integrated supersonic nozzle is a nozzle and a test section as a whole, which is designed to weaken or eliminate the disturbance. The inviscid contour of the supersonic nozzle is based on the method of characteristics. A new curve is formed by the smooth connection between the inviscid contour and test section, and the boundary layer is corrected for the overall curve. Integrated supersonic nozzles with Mach number 1.5 and 2 are designed, which are based on this method. The flow field is validated by numerical and experimental results. The results of the study highlight the importance of the connection about the nozzle outlet and test section.They clearly show that the wave system does not exist at the exit of the supersonic nozzle,and the flow field is uniform throughout the test section.

    1. Introduction

    For supersonic wind tunnels, the connection between nozzle and test section is usually a convex surface or backward step,and the discontinuity of the connection brings the disturbance to the test section. The disturbance behavior coming from the supersonic nozzle outlet is based on the pressure ratio of the nozzle outlet static pressure to the back pressure. When the supersonic nozzle is operated at the pressure ratio below one,the oblique shock waves are formed from the nozzle outlet even inside the nozzle. However, for the normal operation of the supersonic wind tunnel, the pressure ratio less than one is unlikely to happen, so this paper only discusses the case where the pressure ratio is greater than one. If the pressure ratio is greater than one, the supersonic flow through the nozzle outlet negotiating the convex surface or backward step undergoes a Prandtl-Meyer expansion fan.1The Prandtl-Meyer expansion fan interacts at the central zone of the test section and then reflects on the test section wall or the boundary of the free jet. The Mach number downstream of the expansion fan is increased, while pressure, density, and temperature are decreased, making it unsuitable for the test in the area. The Mach angle of the first expansion wave is large in supersonic flow, resulting in a small test rhombus region.Not only is the size of the test model limited, but its attitude angle is also restricted. Thus, it is necessary to enlarge the test area.

    The design method of the nozzle is mainly divided into direct design method and design by analysis.The direct design method is easier than design by analysis,because the boundary conditions have easier access to apply.For the supersonic wind tunnel nozzle, the proper direct design method can deliver quite good flow field and is adopted by this paper. The direct design method based on the Method Of Characteristics(MOC)is used to design the inviscid contour of the supersonic nozzle,which was originally proposed by Prandtl and Busemann.2Foelsch3assumed that there was a source flow in the nozzle,considered and compared the air condition in the conical nozzle, and obtained the analytical expression of the nozzle line.Cresci4inherited the idea of source flow and obtained a continuous curvature of the nozzle by setting a transition region between the source flow and the uniform region. Sivells5accepted and developed the transition region, completely obtained the inviscid contour,and improved the nozzle design theory based on the method of characteristics. To correct the inviscid contour for the viscous effects, the Boundary Layer(BL) calculation based on von Karman integral momentum equation is essential.6

    The test section and nozzle need smooth connection,which can reduce the disturbance caused by the discontinuity. The Integrated Supersonic Nozzle (ISN) is a nozzle and a test section as a whole, which is designed to weaken or eliminate the disturbance.The present paper performs the design method of the ISN and the numerical computation and wind tunnel experiment for them,and the ISN has been set up in the China Academy of Aerospace Aerodynamics (CAAA). The ISN is designed and manufactured according to the industrial standards. There is a two-dimensional nozzle, where two opposite walls are contoured in a convergent-divergent shape but are bounded by parallel walls, providing a rectangular crosssection at each site.

    The Mach number is changed less than 0.01 in the 1.6 m long test section, and aerodynamic forces and moments of the AGARD-B model in the test section agree well with the reference data.7-9There is no expansion wave at the nozzle outlet and test section, so that the size and attitude angle of the test model can be enlarged appropriately.

    2. Design method of ISN

    2.1. Expansion section

    The ISN consists of a supersonic nozzle and test section. The design techniques of the supersonic nozzle smooth MOCbased inviscid contour plus BL correction.The design method is based on Sivells.5,6The basic idea is that the specification of a uniform nozzle outlet flow along with three parts of centerline Mach number distribution, changing monotonically from sonic flow at the throat to the nozzle exit Mach number as illustrated in Fig.1. In the present method, the downstream of the throat is the left-running characteristics region, the radial flow region, the right-running characteristics region,and test region.

    In the present method,throat characteristic IT is combined with the transonic solution of Hall,10,11and the center velocity distribution from sonic point I to point E is described by a third-degree polynomial. Characteristics GE and AB belong to the radial flow region and the flow region can be accurately described by the radial flow equation.5From the point B to point C, Mach number distribution BC is specified by a fourth-degree polynomial. The exit characteristic CD is a straight line because it is defined by the exit Mach number.When the boundary conditions of MOC regions are defined,the characteristic grid point along TIEG and ABCD could be computed in Fig.1. In a supersonic flow, two characteristic lines from every point, and the velocity of every point is u,which are a left running characteristic(S+)and a right running characteristic(S-),are shown in Fig.2.Characteristic lines are Mach lines, which are normally curved. The S+characteristic has an angle θ+μ, and the S-characteristic has an angle θ-μ,where θ is the flow angle and μ is the local Mach angle.

    All points on a characteristic line have the same value of S+,-. In Fig.2, points 1 and 2 locate the same S+and points 2 and 3 lie on the same S-characteristic

    where Ma is Mach number,ν is the Prandtl-Meyer angle given by

    where γ is specific heat ratio.If the coordinates,flow angle and Mach number are known at primary points 1 and 2,the equations of the characteristics line, i.e.

    The coordinates of point 3 are the intersection of lines(S+)2and(S-)1,and the coordinates of point 4 are the intersection of lines(S+)1and(S-)2.The network of the region ABCD is completed by right-running characteristics. The process in region TIEG is similarly calculated by the left-running characteristics. The TG segment and AD segment are determined according to the principle of the mass of conservation, where the mass flow through each of the left running characteristics or the right running characteristics is equal.The contour from point G to point A is a straight line. Thus the inviscid contour TD is determined.

    Fig.1 Symbol and design procedure based on Sivells.

    Fig.2 Characteristic line.

    The actual flow is viscous, resulting in a certain angle between the nozzle outlet flow and the centerline.If the downstream of the nozzle outlet is inconsistent with the angle,there will be the disturbance.The supersonic flow passes through the wall at an angle to the direction of the flow, and small disturbances created by discontinuous boundary will propagate away.The body shape for generating Mach waves is a concave corner, which generates an oblique shock, or a convex corner,generating an expansion fan,φ is corner angle,as illustrated in Fig.3(a)and(b).Where Ma,ρ,p,h,p0are Mach number,density, static pressure, enthalpy, and total pressure, respectively.In order to reduce or eliminate small disturbances,the inviscid contour of nozzle outlet, and test section must be smoothly connected. The inviscid contour test section is a straight line,whose slope is equal to the slope of the nozzle outlet.

    To obtain the viscid contour of the nozzle and test section,each ordinate point of the inviscid contour needs to add a correction for the BL growth δ*. The method of calculating the BL correction is employed by the von Karman integral momentum equation for planar flow, assuming a power law velocity profile with the BL. The BL correction is made for a design condition of the stagnation pressure and temperature.The von Karman momentum is written in the form

    Fig.3 Supersonic flow passes through wall.

    where Θ is momentum thickness, and the value Ma, yw, x are Mach number, y-coordinate and x-coordinate respectively.The term β=arctan(dyw/dx) can be obtained from the inviscid contour. For the wind tunnel nozzles, the form factor H6and the skin friction coefficient Cf6are as a function of Reynolds (Re) number based on the momentum thickness Θ. It is convenient for Eq.(8)to be solved numerically by the applications of the parabolic technique of integration.Note that the integration is started at the nozzle throat.

    For a two-dimensional nozzle with a pair of parallel side walls, there is the BL growth on four walls. The BL growth on the parallel walls is not corrected directly, but the correction on the parallel walls is incorporated into the contour nozzle walls. The displacement thickness of the effective BL is transformed from the correction of parallel and contour walls(see Figs. 4(a) and (b))

    where δcis the BL displacement thickness of contour nozzle,y is ordinate of the inviscid nozzle contour, and W is the width of the parallel side walls.

    2.2. Contraction section

    The nozzle contraction section is designed by using the optimized Witoszynski curve,12which is determined by means of shifting the axis of the Witoszynski curve. The Witoszynski curve equation is described as

    where y*and y0are the half height of the throat and subsonic contraction respectively, x is the length from the inlet of the contraction section,and L is the length of the contraction section. At this time, the method of shifting the axis can be used to optimize the contraction section curve, that is, setting R1and R2to represent the actual half heights of the throat and subsonic contraction

    where Rhis the amount of the displacement axis, and the actual curve coordinates are calculated by replacing y* and y0with R1and R2,and subtracting all the coordinates from Rh.

    2.3. Contour smoothing

    For the convenience of numerical calculation and design processing,the nozzle contour based on the MOC and BL correction needs to be smoothed using Hermit Interpolation Methods (HIM). HIM can be adjusted to provide a good fit for the coordinates.13

    2.4. Contour optimistic

    Conventional nozzle contour is obtained by the MOC method.According to the Sivells’ method, the Mach number at points B and C, and at points E, G and A are related by

    where v is the Prantdtl-Meyer angle,and θ is the flow angle relative to the nozzle centerline.

    Obviously, if point A and point G coincide

    The slope of the nozzle outlet is larger than 0.If the nozzle and the test section are only directly connected,the airflow will continue to expand in the test section,and the test airflow will be disturbed. In the actual design process, in order to ensure the uniform flow field of the test section,the integrated nozzle contour needs to be iterated and optimized. The flow field at the nozzle outlet is under-expansion and continues to expand in the test section. This process is achieved by adjusting the Mach number of point E and point B, and the underexpansion factors λ1and λ2are introduced.

    Fig.4 Schematic of BL thickness.

    Fig.5 Nozzle contour and contour slope.

    The factors λ1and λ2are determined by the height of the nozzle outlet and the maximum expansion angle,and the range of factors λ1and λ2are from 0.8 to 1. The Mach number distribution from point B to point C with the criteria must be taken to ensure that the first derivative is monotonic and the second derivative is negative.With the increase of the designed Mach number, the value can be appropriately increased.

    Geometrically, reducing the disturbance, the smooth connection of the nozzle contour and the test section is necessary.Physically,when the boundary layer growth amount of the test section is matched with the test airflow that continues to expand in the test section,the Mach number of the test section can be very uniform.The inviscid contour of the test section is a straight line, which is tangent to the inviscid contour of the nozzle outlet. Similar to the inviscid nozzle contour, the boundary layer correction is also based on von Karman integral momentum equation. The aerodynamics parameters of the inviscid test section is the same as those as the inviscid nozzle outlet. The effect of the under-expansion factors λ1and λ2are to allow the nozzle outlet airflow to continue to expand slightly downstream, and there are not small disturbances in the test section.

    Fig.6 Optimization process.

    The general iteration and optimization process established to determine the ISN contour is outlined in Fig.6. When the Mach number index of the test section meets the excellent standard,14the optimization is completed, and the number of iterative steps is usually less than 10.

    3. Numerical methods

    The compressible Navier-Stokes equations are utilized for the 2-D and 3-D viscous cases. The Reynolds-averaged governing equations with the Spalart-Allmaras turbulence model15are discretized by cell-centered finite volume method. Jameson and Baker’s four stage Runge-Kutta method16is used for time integration. Second upwind difference schemes17,18with a variety of higher order limiters are employed to calculate the convective terms in the transport equations. Fully implicit time integration schemes are available for steady flow simulation. The MUSCL scheme19with the van Albada flux limiter is adopted for the third order accurate numerical solution.

    For each nozzle, 2-D and 3-D models are used for calculation and each mesh system is the same in the different nozzles.The structured grids are employed by this calculation and are presented in Figs.7(a)and(b)for the 2-D and 3-D case.In the 2-D application, a mesh system of 1001×201 points is employed by Δxmin=1×10-4m located at the throat region around, and Δymin=1×10-5m at the wall. And applied in the 3-D case, a mesh system of 1001×201×201 points is employed, x-direction and y-direction grid distribution are the same as 2-D case, and Δzmin=1×10-5m at the wall.The grid is employed for the 2-D and 3-D case in steady turbulent calculation, and y+ value is less than one.20

    17. Came to a meadow: According to Miller, to dream of meadows, predicts happy reunions under bright promises of future prosperity (377).Return to place in story.

    According to the actual flow conditions,the initial pressure and temperature are chosen from the data obtained by the nozzle calibration test.The inlet pressure of nozzle Ma=1.5 and Ma=2 is 0.15 MPa and 0.186 MPa, respectively. The inlet temperature of both nozzles is 287 K.

    4. Experimental setup

    4.1. Pressure rake

    Fig.7 Calculation model of nozzle.

    Fig.8 Pressure rake.

    Two integrated supersonic wind tunnel nozzle was developed at the end of November 2017. The nozzle inner walls of the nozzle are machined with high precision.To calibrate the flow field, a modular cross arm calibration rake is designed and manufactured, as illustrated in Fig.8(a).21Each pressure sensor has a distance of 35 mm on the rake and 26 sensors are installed on one side. In addition to a sensor on the center axis point, a total of 53 sensors are installed. The calibrated cross-section is 910 mm×910 mm, accounting for about 75.6% of the test section.

    Pressure probe tips are cylindrical with outside/inside diameters respectively of pitot probe 2 mm/0.8 mm. Errors in pitot pressure due to pressure transducer error are±0.05% Full-Scale (FS). Facility unsteadiness and setpoint errors are less than transducer errors for pressures.When calibrating the flow field, the rake is measured every 50 mm along the direction from the nozzle outlet to test section outlet. Fig.8(b)21shows the pressure rake installed in the test section. The test data in the x-oriented direction covers 1.6 m. Each flow field calibration test is repeated 7 times.

    Fig.9 AGARD-B model.

    4.2. Calibration model

    The aerodynamic forces and moments are measured using the AGARD-B model6in the test section, which is tested on N648EA multi-piece internal six-component balance.AGARD-B model is a body-wing configuration. All its dimensions are given in terms of the body diameter ‘‘D”, so that the model can be produced in any scale, as appropriate for a particular wind tunnel. In the present paper, AGARDB model is the slenderness ratio of 8.5, D=102 mm in diameter and the relative thickness of 0.04, and G(x,y,z) is the coordinate of gravity center. Airfoil is symmetric circular arc form, as shown in Fig.9(a).7Fig.9(b) shows AGARD-B model installed in the test section. Each flow field calibration test is repeated 7 times.

    Fig.10 Numerical calculation of Mach number in original nozzle and test section.

    Fig.11 Numerical calculation of Mach number contour in ISN.

    Fig.12 Experimental results of Mach number contour in ISN.

    5. Presentation of results

    5.1. Mach number

    2-D results of the different calculation Mach number contours about the original and optimistic nozzle and test section are shown in Figs. 10(a)-(b) and Figs. 11(a)-(b). Figs. 10(a)and (b) are based on the direct smooth connection condition of the nozzle and the test section. It can be clearly seen that the expansion wave system exists in the test section and the test area is reduced. Fig.11(a) and Fig.11(b) show the calculation results of the ISN. It’s observed that the flow field is quite uniform, and there is no shock wave and expansion in the nozzle exit and test section. 3-D results of the center cross section are very similar to 2-D results, and the centerline data and nozzle outlet data are given as following in detail.

    In the typical experiment, the flow field of the test section is measured by pitot pressure sensor, and the Mach number is calculated from pitot pressure, the total pressure and the total temperature in the test section. The isentropic expansion is supposed in the nozzle, and then the isentropic equations are used to calculate Mach number.22Flow field survey data indicate the spatial variation of the local Mach number is nominally ±0.003. The cross center area of Mach number contours is shown in Figs. 12(a)-(d). Figs. 12(a) and (c) show the Mach contours in the center contour walls, and the Mach number contours of the center parallel walls are shown in Figs. 12(b) and (d). The long length of nearly constant Mach number in the test section is apparent, and the flow field is quite uniform. In the actual flow process, due to processing and installation reasons, the small favorable pressure gradient causes local disturbance of the flow field in the Ma=1.5 test section (see Figs. 12(a) and (b)). However,the disturbance area is small and has little effect on the experimental area.

    Figs. 13(a) and (b) show the comparison of the Mach number in the nozzle contour outlet of the center cross section under 2-D, 3-D and experiment condition. Note that the results of 2-D, 3-D, and experiment match well. The initial conditions of calculation and experiment cannot be exactly the same due to the presence of components such as the stable section in the upstream of the wind tunnel nozzle, and there are certain deviations in calculation and experiment. The results of the 2-D calculation are larger than those of the 3-D numerical calculation under some initial and boundary condition.This is because the parallel walls of the nozzle affect the flow field.

    Figs.14(a)and(b)show the x-oriented vorticity contour in the nozzle outlet cross section (x=4.8 m). Strong vortices Ω exist near the parallel walls and the corners, which affect the flow field near the contour parallel.For the center contour line of the nozzle outlet, the BL thickness of 2-D and 3-D numerical results in Ma=1.5 nozzle are 0.054 m and 0.072 m,whose results in Ma=2 nozzle are 0.059 m and 0.083 m, respectively.However,the influence of the parallel walls and the corners on the flow field is very small and is not in the uniform area.The vorticity of Ma=2 has a larger influence range than the vorticity of Ma=1.5.

    Fig.13 Distribution of Mach number in nozzle outlet of center cross section.

    Fig.14 x-oriented vorticity contour.

    The comparison of Mach number in the nozzle centerline is illustrated in Figs. 15(a) and (b). Note that the results of 2-D,3-D and experiment also match well. Similar to the results at the nozzle outlet, the test results are between the 2-D and 3-D calculation results.

    Tables 1 and 2 give some parameters of the centerline in the contour wall under the whole test section,where Ma-is average Mach number, ΔMa| |maxis the maximum Mach number deviation, and δMais Mach number variance. δMais one of the most important indicators of the nozzle flow field, and δMaincluding Ma=1.5 and Ma=2 is better than the reference excellent indicators140.006 and 0.007 respectively.

    5.2. Aerodynamic forces and moments

    Analysis of the symmetry of the AGARD-B model in ISN is done by measuring aerodynamic coefficients of the symmetrical aerodynamic configurations. The angle of attack α of the AGARD-B model is varied from -10° to 10°, and the experimental data are compared with the Refs. 7-9, as shown in Figs.16(a)-(d).The Cn~α curves and CM~α curves show that the experimental data in ISN are in good agreement with the reference data,where Cnis the normal force coefficient,and CMis pitching moment coefficient.In general,the flow field uniformity in the ISN meets the requirements of normal wind tunnel tests.

    Fig.15 Mach number line in centerline of nozzle contour wall.

    Table 1 Flow field parameters of Ma=1.5.

    Table 2 Flow field parameters of Ma=2.

    Fig.16 Comparison between experimental data and reference data of AGARD-B model.

    6. Conclusions

    This work demonstrates the MOC and BL method of the ISN design.The flow field quality of the ISN has been studied.Both computational methods and experimental data are used to identify concerns. The computation results are in agreement with experimental data. The results with the ISN show that there is no obvious shock wave or expansion wave in the test section, test area is greatly expanded, and the flow quality is also quite uniform. The aerodynamic forces and moments of the AGARD-B model in the whole test section agree well with the reference data.

    The ISN expands the scope of the test area,and the size and attitude angle of the test model can be enlarged appropriately.The technique can be used for future wind tunnel nozzle designs.

    Acknowledgment

    This study is supported by Supersonic Laboratory of CAAA.and National Nature Science Foundation of China(Nos.11672283, 11872349).

    深夜精品福利| 麻豆av噜噜一区二区三区| 内地一区二区视频在线| 人人妻人人看人人澡| 欧美日本视频| 99热精品在线国产| 伦理电影大哥的女人| 一进一出抽搐gif免费好疼| 亚洲精品日韩在线中文字幕 | 精品午夜福利在线看| 长腿黑丝高跟| 一级二级三级毛片免费看| 亚洲最大成人手机在线| 国产精品伦人一区二区| 久久久精品大字幕| 三级男女做爰猛烈吃奶摸视频| 日本免费一区二区三区高清不卡| 亚洲美女视频黄频| 青青草视频在线视频观看| 国产成人a∨麻豆精品| 欧美xxxx性猛交bbbb| 国产精品蜜桃在线观看 | 一级黄色大片毛片| 久久人人精品亚洲av| 久久精品久久久久久噜噜老黄 | 变态另类丝袜制服| 精品免费久久久久久久清纯| 亚洲va在线va天堂va国产| 国产黄色视频一区二区在线观看 | 人妻系列 视频| 午夜精品国产一区二区电影 | 久久久久久久久久久丰满| 天堂av国产一区二区熟女人妻| 伦理电影大哥的女人| 国产精品国产高清国产av| 成人亚洲欧美一区二区av| 国产高潮美女av| 深夜a级毛片| 精品午夜福利在线看| 夜夜爽天天搞| 中出人妻视频一区二区| 免费人成在线观看视频色| 亚洲av.av天堂| 欧美一区二区亚洲| 久99久视频精品免费| 精品久久久久久成人av| 尾随美女入室| 在线观看av片永久免费下载| 看非洲黑人一级黄片| 久久99精品国语久久久| 男女边吃奶边做爰视频| 国产精华一区二区三区| 国产中年淑女户外野战色| 又爽又黄a免费视频| 欧美人与善性xxx| 1000部很黄的大片| 亚洲av免费在线观看| 一区二区三区高清视频在线| 黑人高潮一二区| 亚洲av熟女| 欧美色视频一区免费| 中文字幕制服av| 天堂av国产一区二区熟女人妻| 欧美最新免费一区二区三区| 亚洲美女视频黄频| 一夜夜www| 国产黄色视频一区二区在线观看 | 精品人妻一区二区三区麻豆| 欧美人与善性xxx| 成人毛片a级毛片在线播放| 97人妻精品一区二区三区麻豆| 成年女人永久免费观看视频| 欧美色视频一区免费| 99久久人妻综合| 伦精品一区二区三区| 日本黄大片高清| 日本色播在线视频| 亚洲最大成人av| 午夜免费激情av| 婷婷色av中文字幕| 成人亚洲精品av一区二区| 亚洲成av人片在线播放无| 身体一侧抽搐| av又黄又爽大尺度在线免费看 | 五月伊人婷婷丁香| 日韩av在线大香蕉| 级片在线观看| 久久久久久九九精品二区国产| 男女边吃奶边做爰视频| 极品教师在线视频| 九九在线视频观看精品| 一边亲一边摸免费视频| 成年免费大片在线观看| 亚洲经典国产精华液单| 丰满的人妻完整版| 性色avwww在线观看| 精品久久久久久久久久久久久| 看十八女毛片水多多多| 亚洲精品日韩在线中文字幕 | 国产亚洲精品av在线| 国产毛片a区久久久久| 婷婷色综合大香蕉| 日本欧美国产在线视频| 成人一区二区视频在线观看| 男的添女的下面高潮视频| 男女边吃奶边做爰视频| 亚洲av不卡在线观看| 亚洲av二区三区四区| 精品一区二区免费观看| 亚洲国产精品成人久久小说 | 国产精品久久久久久av不卡| 成人美女网站在线观看视频| av在线观看视频网站免费| 深爱激情五月婷婷| 久久久久久久久久久丰满| 国产黄片美女视频| 99久久中文字幕三级久久日本| 国模一区二区三区四区视频| 国产伦精品一区二区三区四那| 国产精品久久久久久亚洲av鲁大| 最近视频中文字幕2019在线8| 人妻系列 视频| 不卡视频在线观看欧美| 免费不卡的大黄色大毛片视频在线观看 | 国内精品美女久久久久久| 深夜精品福利| 国产淫片久久久久久久久| 大又大粗又爽又黄少妇毛片口| 麻豆久久精品国产亚洲av| 国产一区二区在线av高清观看| 51国产日韩欧美| 久久久久久久久中文| 亚洲精品日韩在线中文字幕 | 日韩,欧美,国产一区二区三区 | 卡戴珊不雅视频在线播放| 别揉我奶头 嗯啊视频| 99视频精品全部免费 在线| 国产成年人精品一区二区| 久久久久网色| 国产免费男女视频| 99久久中文字幕三级久久日本| 老司机影院成人| 中文字幕av在线有码专区| 久久久午夜欧美精品| 偷拍熟女少妇极品色| 午夜激情欧美在线| 天天一区二区日本电影三级| 高清日韩中文字幕在线| 少妇人妻精品综合一区二区 | 精品午夜福利在线看| 最近2019中文字幕mv第一页| 亚洲经典国产精华液单| 国产精品人妻久久久影院| 成人性生交大片免费视频hd| 久久精品国产亚洲av涩爱 | av在线老鸭窝| 国产亚洲5aaaaa淫片| 两个人视频免费观看高清| 中文在线观看免费www的网站| 人体艺术视频欧美日本| 亚洲av免费在线观看| 国产片特级美女逼逼视频| 国产精品人妻久久久久久| 日韩中字成人| 亚洲国产色片| 两性午夜刺激爽爽歪歪视频在线观看| 高清日韩中文字幕在线| 麻豆精品久久久久久蜜桃| 黄色一级大片看看| 男女边吃奶边做爰视频| 久久精品国产鲁丝片午夜精品| 国产一级毛片七仙女欲春2| 成年女人永久免费观看视频| 精品久久久久久成人av| 久久欧美精品欧美久久欧美| 天天躁日日操中文字幕| 免费一级毛片在线播放高清视频| 欧美bdsm另类| 熟女人妻精品中文字幕| 色综合色国产| 精品久久国产蜜桃| 亚洲精品456在线播放app| 欧美日韩国产亚洲二区| 九九久久精品国产亚洲av麻豆| 日韩欧美精品免费久久| 久久亚洲国产成人精品v| 看非洲黑人一级黄片| 搡女人真爽免费视频火全软件| 男插女下体视频免费在线播放| 免费人成在线观看视频色| 国产精品久久久久久亚洲av鲁大| 观看美女的网站| 欧美另类亚洲清纯唯美| 日韩精品青青久久久久久| 亚洲七黄色美女视频| 精品久久久久久成人av| av天堂在线播放| 色播亚洲综合网| 久久人妻av系列| 波多野结衣高清无吗| 丝袜美腿在线中文| 大又大粗又爽又黄少妇毛片口| 1000部很黄的大片| 免费搜索国产男女视频| 国产成人午夜福利电影在线观看| 黄片wwwwww| 亚洲va在线va天堂va国产| 国产色爽女视频免费观看| 大型黄色视频在线免费观看| 校园人妻丝袜中文字幕| 欧美潮喷喷水| 热99在线观看视频| 国产美女午夜福利| 小说图片视频综合网站| 亚洲精品国产成人久久av| 免费黄网站久久成人精品| 国产女主播在线喷水免费视频网站 | 亚洲成人久久性| 欧美日韩乱码在线| 午夜视频国产福利| 99热只有精品国产| 女的被弄到高潮叫床怎么办| ponron亚洲| 99国产精品一区二区蜜桃av| 亚洲av中文字字幕乱码综合| 在线观看一区二区三区| 美女 人体艺术 gogo| 欧美最新免费一区二区三区| 精品免费久久久久久久清纯| 人人妻人人看人人澡| 草草在线视频免费看| 能在线免费观看的黄片| 成人特级黄色片久久久久久久| 久久综合国产亚洲精品| 精品国内亚洲2022精品成人| 九九久久精品国产亚洲av麻豆| 狂野欧美白嫩少妇大欣赏| 看十八女毛片水多多多| 成年女人永久免费观看视频| 久久久久久久亚洲中文字幕| 成人三级黄色视频| 久99久视频精品免费| 网址你懂的国产日韩在线| 床上黄色一级片| 女的被弄到高潮叫床怎么办| 亚洲精品乱码久久久久久按摩| 国产精品久久视频播放| 欧美+日韩+精品| 国产精品国产三级国产av玫瑰| 欧美色欧美亚洲另类二区| 免费无遮挡裸体视频| 国产av不卡久久| 中文字幕制服av| 男女啪啪激烈高潮av片| 午夜精品在线福利| 在线观看66精品国产| 成人特级av手机在线观看| 日本三级黄在线观看| 国产高潮美女av| 国产成人a∨麻豆精品| 国产午夜精品一二区理论片| 五月玫瑰六月丁香| 亚洲第一电影网av| 日韩精品有码人妻一区| 特大巨黑吊av在线直播| 此物有八面人人有两片| 成人av在线播放网站| 国产精品一区二区三区四区免费观看| or卡值多少钱| 啦啦啦观看免费观看视频高清| 热99在线观看视频| 99久国产av精品| 中文字幕av成人在线电影| 好男人视频免费观看在线| 看片在线看免费视频| 超碰av人人做人人爽久久| 蜜桃亚洲精品一区二区三区| 午夜福利在线在线| 人妻少妇偷人精品九色| 寂寞人妻少妇视频99o| 少妇猛男粗大的猛烈进出视频 | av在线天堂中文字幕| 国产精品久久电影中文字幕| 哪个播放器可以免费观看大片| 麻豆成人午夜福利视频| 两性午夜刺激爽爽歪歪视频在线观看| 乱人视频在线观看| 国产欧美日韩精品一区二区| 长腿黑丝高跟| 日韩大尺度精品在线看网址| 黄片wwwwww| 午夜爱爱视频在线播放| 成年女人看的毛片在线观看| 18禁在线无遮挡免费观看视频| 欧美日韩国产亚洲二区| or卡值多少钱| 精品久久久久久久人妻蜜臀av| 色吧在线观看| 日本三级黄在线观看| 国产午夜精品久久久久久一区二区三区| 99在线视频只有这里精品首页| 一级黄色大片毛片| 一边摸一边抽搐一进一小说| 看十八女毛片水多多多| 一区二区三区四区激情视频 | 一个人观看的视频www高清免费观看| 免费av观看视频| 99在线人妻在线中文字幕| 日韩欧美国产在线观看| 高清日韩中文字幕在线| 亚洲国产精品国产精品| 久久婷婷人人爽人人干人人爱| 久久精品久久久久久久性| 1000部很黄的大片| 午夜免费激情av| 成年版毛片免费区| 我要搜黄色片| 久久久久久久久久成人| 美女xxoo啪啪120秒动态图| 亚洲欧美日韩高清在线视频| 爱豆传媒免费全集在线观看| 日韩欧美国产在线观看| 久久久久久久久大av| 国产91av在线免费观看| 婷婷色综合大香蕉| 亚洲av电影不卡..在线观看| 久久99蜜桃精品久久| 国产真实乱freesex| 夜夜看夜夜爽夜夜摸| 亚洲欧美日韩卡通动漫| 一个人看视频在线观看www免费| 国产精品日韩av在线免费观看| 国产在线精品亚洲第一网站| 国产私拍福利视频在线观看| 色尼玛亚洲综合影院| 日韩欧美精品v在线| 亚洲人与动物交配视频| 欧美一区二区精品小视频在线| 毛片女人毛片| 边亲边吃奶的免费视频| 久久久国产成人免费| 天堂中文最新版在线下载 | 亚洲成av人片在线播放无| 免费不卡的大黄色大毛片视频在线观看 | 欧美日本视频| 又粗又硬又长又爽又黄的视频 | 国产一区二区三区av在线 | 久久精品夜夜夜夜夜久久蜜豆| a级毛色黄片| av在线蜜桃| 亚洲va在线va天堂va国产| 一个人看视频在线观看www免费| 亚洲国产欧美人成| 一级毛片aaaaaa免费看小| 久久亚洲精品不卡| 蜜桃久久精品国产亚洲av| 18禁黄网站禁片免费观看直播| 美女高潮的动态| 国产亚洲5aaaaa淫片| 久99久视频精品免费| 日本黄大片高清| 午夜福利视频1000在线观看| 美女脱内裤让男人舔精品视频 | 国产午夜精品论理片| a级毛片免费高清观看在线播放| 欧美最黄视频在线播放免费| 五月玫瑰六月丁香| 99热精品在线国产| 成人特级av手机在线观看| 99久久精品一区二区三区| av又黄又爽大尺度在线免费看 | 天堂av国产一区二区熟女人妻| 波多野结衣高清作品| 99热这里只有是精品50| 高清日韩中文字幕在线| 久久人妻av系列| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | 久久精品人妻少妇| 最近的中文字幕免费完整| 成人毛片a级毛片在线播放| 午夜爱爱视频在线播放| 日产精品乱码卡一卡2卡三| 国产精品一二三区在线看| 久久99精品国语久久久| 干丝袜人妻中文字幕| 夜夜夜夜夜久久久久| 大型黄色视频在线免费观看| 欧美xxxx性猛交bbbb| 日本免费一区二区三区高清不卡| 韩国av在线不卡| 插逼视频在线观看| 国产精品精品国产色婷婷| 日韩大尺度精品在线看网址| 在线免费观看的www视频| 麻豆乱淫一区二区| 欧美精品一区二区大全| 非洲黑人性xxxx精品又粗又长| 午夜福利高清视频| 热99re8久久精品国产| 男的添女的下面高潮视频| 精品人妻熟女av久视频| 99国产极品粉嫩在线观看| 国产精品美女特级片免费视频播放器| 日韩av不卡免费在线播放| 在现免费观看毛片| 22中文网久久字幕| 成人性生交大片免费视频hd| 久久久午夜欧美精品| 国产老妇伦熟女老妇高清| 国产一级毛片七仙女欲春2| 亚洲av免费高清在线观看| 国产一级毛片七仙女欲春2| 午夜免费激情av| 日本-黄色视频高清免费观看| 在线观看午夜福利视频| 国产精品.久久久| 亚洲五月天丁香| 久久久久国产网址| 亚洲国产精品成人综合色| 九草在线视频观看| 午夜老司机福利剧场| 国产白丝娇喘喷水9色精品| 哪里可以看免费的av片| 一级毛片aaaaaa免费看小| 免费电影在线观看免费观看| 中文在线观看免费www的网站| 看非洲黑人一级黄片| 如何舔出高潮| 婷婷六月久久综合丁香| 青春草国产在线视频 | 国产伦精品一区二区三区视频9| 成人亚洲精品av一区二区| 18禁黄网站禁片免费观看直播| 国产单亲对白刺激| 欧美日韩精品成人综合77777| 午夜福利成人在线免费观看| 久久精品夜夜夜夜夜久久蜜豆| 亚洲人成网站在线播| 亚洲精品久久久久久婷婷小说 | 亚洲av一区综合| 特级一级黄色大片| 丝袜美腿在线中文| 免费无遮挡裸体视频| 欧美成人a在线观看| 黄色配什么色好看| 中国国产av一级| 中国美白少妇内射xxxbb| 欧美性猛交╳xxx乱大交人| 国产伦在线观看视频一区| 成人漫画全彩无遮挡| kizo精华| 校园人妻丝袜中文字幕| 国产精品.久久久| 午夜老司机福利剧场| 日本成人三级电影网站| 久久九九热精品免费| 99久久久亚洲精品蜜臀av| 99riav亚洲国产免费| 不卡一级毛片| 国产老妇伦熟女老妇高清| 亚洲av中文av极速乱| 少妇熟女欧美另类| 亚洲国产精品sss在线观看| 99热这里只有是精品在线观看| 悠悠久久av| 能在线免费观看的黄片| 日本五十路高清| 欧美3d第一页| 91av网一区二区| 一级av片app| 97人妻精品一区二区三区麻豆| 女人被狂操c到高潮| 亚洲欧洲国产日韩| 国产探花在线观看一区二区| 一级毛片久久久久久久久女| 夫妻性生交免费视频一级片| 欧美色视频一区免费| 国产精品久久久久久亚洲av鲁大| 老司机福利观看| 色综合亚洲欧美另类图片| av在线老鸭窝| 激情 狠狠 欧美| 不卡视频在线观看欧美| 一本久久中文字幕| 神马国产精品三级电影在线观看| 亚洲不卡免费看| 久久久久久久久久黄片| 国产午夜精品一二区理论片| 69人妻影院| 中文亚洲av片在线观看爽| 亚洲欧美中文字幕日韩二区| 97人妻精品一区二区三区麻豆| 国产久久久一区二区三区| 国产成年人精品一区二区| 亚洲欧美成人精品一区二区| 日日摸夜夜添夜夜爱| 亚洲国产高清在线一区二区三| 久久午夜亚洲精品久久| 亚洲自拍偷在线| 午夜久久久久精精品| 国产一区二区在线av高清观看| 久久精品国产亚洲av涩爱 | 欧美又色又爽又黄视频| 亚洲av电影不卡..在线观看| 国产成年人精品一区二区| kizo精华| 中国美女看黄片| 亚洲精品亚洲一区二区| 中文字幕制服av| 精品午夜福利在线看| 亚洲成av人片在线播放无| 欧美成人a在线观看| 国产精品综合久久久久久久免费| 精品日产1卡2卡| 日韩欧美三级三区| 久久亚洲国产成人精品v| 一个人观看的视频www高清免费观看| 国产精品一区二区性色av| 麻豆av噜噜一区二区三区| 99热网站在线观看| 亚洲欧美成人精品一区二区| 一级毛片我不卡| 亚洲精品亚洲一区二区| 亚洲图色成人| 久久久久久久午夜电影| 成年版毛片免费区| 精品欧美国产一区二区三| av天堂中文字幕网| 久久久欧美国产精品| 青青草视频在线视频观看| 成人特级黄色片久久久久久久| 夜夜夜夜夜久久久久| 99热网站在线观看| 欧美日本视频| 亚洲七黄色美女视频| 成年女人看的毛片在线观看| 亚洲一区高清亚洲精品| 日韩精品有码人妻一区| 亚洲av中文字字幕乱码综合| 亚洲aⅴ乱码一区二区在线播放| 美女脱内裤让男人舔精品视频 | 国产黄片美女视频| 欧美xxxx性猛交bbbb| eeuss影院久久| 国产又黄又爽又无遮挡在线| 国产精品三级大全| 国内精品一区二区在线观看| 国产精品久久久久久精品电影小说 | 在线免费观看的www视频| 日韩成人伦理影院| 毛片女人毛片| 精品人妻视频免费看| 国产在线精品亚洲第一网站| 在线观看美女被高潮喷水网站| 日本黄色视频三级网站网址| 国产单亲对白刺激| 国产一区亚洲一区在线观看| 欧美激情国产日韩精品一区| 亚洲欧美日韩高清专用| 久久精品国产自在天天线| 一级毛片aaaaaa免费看小| 夜夜爽天天搞| 波多野结衣高清无吗| 又爽又黄a免费视频| 噜噜噜噜噜久久久久久91| 亚洲经典国产精华液单| 韩国av在线不卡| 99久久中文字幕三级久久日本| 国产精品不卡视频一区二区| 男人的好看免费观看在线视频| 波多野结衣高清无吗| 又爽又黄a免费视频| 激情 狠狠 欧美| 中文亚洲av片在线观看爽| 欧美丝袜亚洲另类| 国产精品一及| 国产伦一二天堂av在线观看| 一本久久中文字幕| 精品人妻视频免费看| 精品国内亚洲2022精品成人| 国产精品久久久久久av不卡| av天堂在线播放| 亚洲av成人精品一区久久| 国产黄色小视频在线观看| 日韩欧美 国产精品| 夜夜夜夜夜久久久久| 国产一区亚洲一区在线观看| 国产成人freesex在线| 国产精品一区www在线观看| 午夜a级毛片| 国产精品不卡视频一区二区| 日韩高清综合在线| 成人三级黄色视频| 日韩欧美国产在线观看| 久久综合国产亚洲精品| 欧美日韩一区二区视频在线观看视频在线 | 亚洲丝袜综合中文字幕| 色播亚洲综合网| 欧美一区二区精品小视频在线| 精品日产1卡2卡| АⅤ资源中文在线天堂| 黄色日韩在线| 亚洲欧美中文字幕日韩二区| 亚洲欧洲国产日韩| 欧美变态另类bdsm刘玥| 97热精品久久久久久| 国产极品天堂在线| 尤物成人国产欧美一区二区三区| 久久综合国产亚洲精品| 国产精品综合久久久久久久免费| 天堂影院成人在线观看| 免费看美女性在线毛片视频| 国内精品美女久久久久久| 久久久久久久久久久丰满| 亚洲,欧美,日韩|