• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Development of Composite Cellular Cores for Sandwich Panels Based on Folded Polar Quadra-Structures

    2016-12-01 03:18:38ValentinKhaliulinWangZhijinGershtein

    Valentin Khaliulin,Wang Zhijin,Gershtein E M

    1.Kazan National Research Technical University Named After A.N.Tupolev,Kazan 420111,Russia;

    2.Minister Key Discipline Laboratory of Advanced Design Technology of Aircraft,

    Nanjing University of Aeronautics and Astronautics,Nanjing 210016,P.R.China

    Development of Composite Cellular Cores for Sandwich Panels Based on Folded Polar Quadra-Structures

    Valentin Khaliulin1,Wang Zhijin2*,Gershtein E M1

    1.Kazan National Research Technical University Named After A.N.Tupolev,Kazan 420111,Russia;

    2.Minister Key Discipline Laboratory of Advanced Design Technology of Aircraft,

    Nanjing University of Aeronautics and Astronautics,Nanjing 210016,P.R.China

    An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented.Polar folded quadra-structures are regarded as a geometric basis for these cores whose standard fragment has the fourth degree of axial symmetry.The classification of the polar structures are described and a method of various quadra-structure synthesis is developed.A possibility to provide high strength of the structure due to preservation of faces reinforcement pattern is presented.Arrangement of the plane core on a bi-curvature surface is also introduced.Besides,provision of isotropy of the core in two or three directions are described.Einally,examples of cellular folded cores manufactured from basalt reinforced plastic are demonstrated.

    composite sandwich panel;cellular core;folded polar quadra-structure;synthesis of cellular structure; quadra-structure classification

    0 Introduction

    This paper proposed a subclass classification of folded cores for sandwich panels with cellular structure.Cellular structure is a structure formed by periodically repeated cup-shaped elements. Unlike honeycomb structures composed of tubular elements(honeycombs),standard units of cellular structures create cavities that are separated from each other and distribute on one side of the skins[1](Fig.1).Despite being inferior to honeycombs in strength,cellular structures have a range of advantages.Eor example,they may be arranged on bi-curvature surfaces from the initial two-dimensional state.Cells may be interconnected,providing the possibility to remove moisture from the panel.Cellular cores have a large skin bonding area.There is a possibility to develop efficient energy absorbing panels based on cellular structures.

    Fig.1 Cellular core

    Limited application of cellular cores is associated with high-strength material processing problems.Only plastic materials with increased ultimate extensional strain are applicable for cupshaped cells molding.These materials usually have rather low specific mechanical properties.

    Currently,cellular cores are produced from a range of materials,including thermoplastic ones using vacuum molding or automatic injection machines and casting mold(Fig.1(a)).These cores have low strength and cannot be used in aerospaceor naval structures.

    *Corresponding author,E-mail address:zhijin@nuaa.edu.cn.

    How to cite this article:Valentin Khaliulin,Wang Zhijin,Gershtein E M.Development of composite cellular cores for sandwich panels based on folded polar quadra-structures[J].Trans.Nanjing Univ.Aero.Astro.,2016,33(5):519-528. http://dx.doi.org/10.16356/j.1005-1120.2016.05.519

    At the same time,there is a case of so-called″hypar″cellular structure(Fig.1(b))application in the nosing of An-124 aircraft.It is produced from glass-fiber prepreg using complex technology.Due to the fact that glass fiber does not allow large elongation values and it has a limited drapability,the process has low quality stability.Besides,it is impossible to produce a core with deep relief.

    In recent years,braided cellular cores started to appear(Fig.1(c)).The main disadvantages of such structures are thin fiber placement as well as large fiber bending,which decrease the strength of the structure.

    Therefore,creating a technology that will allow implementation of the ultimate properties of composites in cellular cores is essential.

    Considering the fact that drawing with large elongation is not allowed for composites,a processing scheme based on a blank(a prepreg of dry fabric)folding into a cellular core seems to be an efficient way.

    Eolded structure is a faceted surface that can be unfolded into a plane sheet and consists of repeating uniform fragments,composed of polygonal faces[2].

    Eolded structures are formed from a sheet by means of isometric transformation,i.e.faces are not deformed.Herein this property provides permanence of faces reinforcement pattern in the process of cellular structure manufacturing.As a result,ultimate composite properties are guaranteed in the faces of the folded core.

    1 Types of Folded Structures

    Each folded structure has its own standard repeated fragment[3],a so-called elementary unit (EU).EU defines all geometric properties of the structure as well as the kinematics of its transformation[1-2].

    An EU has a minimum required amount of faces,which is enough for identification of the structure[2].One of the main EU characteristics is its degree of symmetry[2,4].

    There are two large subclasses of folded structures based on the type of symmetry and the alignment of EUs[5],which are row structures and polar one(Fig.2).

    Fig.2 Examples of elementary units in folded structures

    Degrees of symmetry of the row folded structures are less than three,i.e.they have only one mirror symmetry.Their geometric properties are different in two orthogonal directions.As a result,EU of these structures is located in rows (Figs.2(a,b)),thus giving their name[6-8].

    EU of polar structures has a geometric center—A pole,and geometry of the structure is formed around it(Figs.2(c—e)).EU has a degree of symmetry corresponding to this or that structure.The degree of symmetry is defined by a factor k.

    whereαis the minimum angle of EU rotation around the pole that is required for its complete alignment with a stationary one.

    Polar structures have identical geometric properties in two or three directions and it is convenient to examine them in orthogonal and hexagonal grids,respectively(Figs.2(c—e)).Their EUs are always located in the nodes of two-and three-axes grids at regular intervals from each other.

    As for the configuration of the structures, the row ones may be characterized as crimped and polar ones as cellular.The polar structures are discussed in the paper as a geometric basis for sandwich panel′s cellular cores[9].

    2 Polar Structures with Various Degrees of Axial Symmetry

    Currently we can talk about three groups of polar structures with third,fourth and sixth degree of axial symmetry,and we will call them trio-(T),quadra-(K)and hexa-(G)structures,respectively.

    Figs.2(c—e)show random structures representing each group.Eor EU to be aligned with its initial position in a trio-structure,it should be rotated 120°.It is rotated around Pole A in the triangle.EUs in quadra-and hexa-structures (Figs.2(d,e))should be rotated 90°and 60°,respectively.

    It should be noted that trio-and hexa-structures will have uniform properties in three directions relative to the pole,while quadra-structures will have uniform properties in two directions. Thus,polar structures will have a higher nominal isotropy compared with row structures.

    3 Cellular Structures Synthesis

    Various structural configurations are concerned when folded cellular structures are being developed.It appears that there is an infinite multitude of polar folded structures and the architectures are not logically related.This paper proposes a feasible approach to classify polar folded structures.

    This method is based on the following principles:

    Eirst,it has been a consensus that there are only three large groups of polar folded structures: trio-(T),quadra-(K)and hexa-(G).However, it has not been proved yet.

    Then,each group has a primary structure, so called″maternal structures″.Maternal structures have a certain peculiarity:none of them can be obtained from another by the reduction of amount of structural elements.In other words,if we compare relative structures based on the amount and location of structural elements,the maternal one will be the simplest and will contain a minimal amount of faces and ribs.

    A compensator is a fragment of a structure that is composed of a few connected faces.When they rotate around the ribs,the structure will be converted.Thus,compensators make the transformation of a plane surface into faceted possible.

    By far,three types of compensators are known.Compensators applied on quadra-structures are shown in Fig.3.

    Fig.3 Compensators of quadra-structures and their transformation

    Z and V compensators obtain their names due to a similarity to the primary row four-axis structures[5]:Azimuthal—Z-crimp and reverse—V-crimp.S compensator is another type.It has not previously been used in row structures.

    Peculiarity of maternal structures is entirely determined by the compensator they are composed of.

    The amount of compensators and their location corresponds to the degree of axial symmetry of the structure.Eor example,Fig.4 demonstrates elementary units of three existing types of quadra-structures with Z,V and S compensators. In all three cases,the logic of compensators for placement is defined by the orthogonality of the grid.

    Fig.4 Elementary units of quadra-structures

    It should be noted that all three groups of structures—trio,quadra and hexa are built on the same Z,V and S compensators.Degree of symmetry and compensator define the abbreviation of the structure:TZ,TV,TS for trio-structures; KZ,KV,KS for quadra-structures and GZ,GV, GS for hexa-structures.

    As an example,Fig.5 illustrates three possible maternal quadra-structures with Z,V and S compensators.

    Fig.5 Maternal structures generated from compensators

    Einally,a feasible method to develop new structures by maternal modification is studied.

    Modification methods are borrowed from row structures technology[9].Basic methods of modification are as follows:

    Global—drawing the ribs apart parallel to the initial position.As a result,a new rectangular face appears between the initial faces(Figs.6(a, b)).

    Local—fan-type drawing of the ribs,when a rib on one side stays still.As a result,there are new triangular faces(Fig.6(c)).

    Combined global and local—simultaneous drawing up and angular motion of template lines (Fig.6(d)).As a result,trapezoid faces appear.

    Parametric—modification of the length and angle of the rib on the template.The total amount of faces and angles in each face does not vary.As a result,only initial shape of the faces is distorted.

    Symbols,shown in Figs.6(a,b),illustrate global modification,such as drawing coordinate and diagonal lines up,respectively.Symbols of Fig.6(c)demonstrate local modification for the line that has an end on one side,so it is a fan-type drawing up.Symbols of Fig.6(d)show that the line is modified both locally and globally.

    Fig.6 Symbols for modification methods

    4 Examples

    4.1 Z compensator based quadra-structures modification

    KZ and KV maternal quadra-structures(Fig.5) have a flat relief and low concentration of structural elements.These peculiarities make themunattractive for application as sandwich panel cores.They may be applied in the structure of heat-exchanging lamellar devices or as a decorative facing. The structures developed by modification methods are more attractive. Fig.7 illustrates the results of KZ maternal structure modification.Elementary units are located on the orthogonal grid and have the fourth degree of symmetry as shown in the figure. Modification can be carried out in the following way. Maternal structure(Fig.7(a))is entirely composed of triangular faces.It is a set of pyramids,when compressed. After global modification along orthogonal lines of the template(Fig.7(b))rectangular tilted faces as well as square faces in the pole zones appear.Relief of the structure becomes deeper and the volume of the structure becomes more saturated with faces. Global modification along the diagonal lines (Fig.7(c))also leads to development of rectangular side faces and square faces.Square faces are rotated 90°toward coordinate lines. Unlike the previous example,relief corresponding to the plane state of faces in this structure is more sloping.The volume of the structure has a small concentration of faces. Local modification(Fig.7(d))provides squares in the pole zones.All faces are triangular. Fig.7(e)shows a structure,developed by combined modification—global and local. As a result,octagonal faces appear in the upper surface and square faces appear in the median surface.There are still triangular faces,while trapezoidal faces are still the majority. It should be noted that all developed KZ structures have a double mirror symmetry about coordinate and diagonal lines apart from the fourth degree of axial symmetry.

    4.2 Synthesis of quadra-structures with V compensator Application of V compensator lies on the ba-sis of KV structures(Fig.3(b)).V compensator is borrowed from the technology of row reverse structures.It consists of two four-axis nodes that provide a transformation of the structure.

    Fig.7 Modifications of KZ structure(templates and 3D models)

    Similar to the case of KZ structure,peculiar geometry appears as a result of modification: Square areas appear in the upper and lower surfaces in the nodes of the grid,while side faces become tilted and obtain rectangular and trapezoid shape.Most of the structures have a sloping surface and low concentration of structural elements when folded.

    Fig.8 demonstrates structures developed from the maternal one via modification.

    Only two structures(Figs.8(b,e))have deep relief and may be useful for practical application.

    Fig.8 Modification of KV structure(templates and 3D models)

    4.3 Synthesis of quadra-structures with S compensator

    Maternal structure based on S compensator is significantly different from KZ and KV structures in its involuntary properties.It does not get double mirror symmetry and that is why in this case it is not possible to apply global and local modification.

    Size compensation during transformation is provided by the rotatory movement of a square face 1 around its center and folding of Eaces 2,3 (Fig.3(c)).

    Fig.9 shows a process of maternal KS structure modification,which includes drawing the lines a-a′,b-b′,c-c′and d-d′of each compensator up on a double width of a square.As a result, rectangular faces with sides a-a1,b-b1,c-c1and dd1appear(Fig.9(b)).This procedure reminds of global modification of KZ and KV structures.

    Fig.9 Modification of maternal KS structures

    Fig.10 demonstrates the examples of cellular structures developed from maternal KS structure (Fig.10(a))by modification similar to the global method.

    Fig.10 KS structures

    4.4 Parametric modification of quadra-structures[10]

    Quadra-structures as well as row structures can be parametrically modified.When the structure is parametrically modified,the contents of the structure do not change,i.e.the amount and type of faces as well as connection between the faces keep unchanged.Angles at the faces and proportions between ribs length are modified accordingly.These modifications,seems insignificant,may result in a considerable change of the structure architecture.

    Parametric modification must be very efficient in case it is necessary in order to synthesize a structure with practically applicable geometry. A few examples of parametric modification and its capabilities are reviewed below.

    Fig.11 demonstrates two KV structures developed by global modification.Obviously,it is reasonable to introduce significant changes into geometric properties of the structures,varying the size of triangle and square.

    Fig.11 Modification of relief by variation of template parameters during global modification of KV structure

    As for KZ structure,the same result can be observed by combined modification.

    Fig.12(a)shows globally modified KZ structure.If Triangles 1,2 are uniform and proportions between the sizes of structural elements are modified,we get a structure,indicated in Fig.12 (b).This structure has a very dense relief with compact arrangement of cubical elements with vertical side faces.

    A large variety of architectures may be developed via modification of KS structures.

    Fig.13 illustrates possible variants of KS structure No.3 modifications.These modifica-tions are performed by transformation of a right triangle(Fig.13(a))into an distorted triangle (Fig.13(b))and an isosceles triangle (Figs.13(c,d)).

    Fig.12 Modification of relief by varying template parameters

    Fig.13 Possible schemes of parametric modification of KS structure No.3

    As a result of such transformations,it is possible to change the mutual orientation of square faces 3 and 4 as well as their sides′size proportions.

    Parametrically modified structure No.3 has amazing geometric properties.Fig.14 shows atemplate and the structure itself.

    Fig.14 Parametrically modified KS structure No.3

    It is obvious that the structure has solid upper and lower surfaces and consists of closed chambers that have a shape of pyramids or prisms.During transformation right-triangle faces are replaced with isosceles-triangle ones and square faces 1 and 2 are rotated 90°.

    4.5 Comparison of properties of quadra-structures

    The geometric properties of quadra-structures are reviewed from the point of possibility and aptness of their application as light cores for sandwich panels.

    The majorities of KZ and KV structures,developed via modification,have a sloping relief and low concentration of structural elements.It makes them unattractive for such application as light cores for sandwich panels.They may be applied as heat exchange lamellar devices or decorative coating,with the exception of structures,locally modified along coordinate lines(Fig.7(d)—KZ structure and Fig.8(d)—KV structure). Their advantages are large depth of the cell and the possibility to increase the ratio between the height of the structure and the area of supporting square elements.This is how large concentration of vertical structural elements may be achieved. The disadvantages are as follows:Connection of faces creates a lock with penetration of a few faces into truncated tetrahedral pyramids.Such configuration makes it difficult to produce such core using existing methods[11].

    There is an interesting KV structure,developed via combined modification along coordinate axes and diagonal lines(Fig.8(e)).Its configuration is close to″hypar″structure,which is applied in the aerospace industry(Fig.1(b)).Eunctionality of KZ and KV structures may be increased by variation of template parameters(Figs.11, 12).The same applies to the structures obtained via combined modification along coordinate axes.

    Geometric properties of KS structure fit better for their practical application,for example,as light cores in sandwich panels.

    Advantages of these structures are as follows:

    (1)Close arrangement of cubic cells.

    (2)Absence of tilted elements(faces).

    (3)Close contact between the vertical faces.

    (4)Regular alternation of square faces in upper and lower surfaces of the structure.

    (5)Absence of lock-type contacts between the faces.

    Aforementioned advantages define superior mechanical properties of the core,including strength of″core-skin″connection.

    Disadvantages are a rigid connection between the sizes of vertical and horizontal ribs.These structures(unlike KZ and KV ones)cannot have a various height while the size of horizontal faces keep unchanged.Structural element concentration cannot be changed when the height of the structure is fixed.

    Trio-(T)and hexa-(G)structures are not considered in this paper.Methods of modification for those structures have much in common with the method used for quadra-structures.

    5 Practical Applications of Polar Structures

    The most prospective area of polar structures application can be a geometric basis for the cores of sandwich panels.

    Main advantages of the presented idea of cellular cores development are obviously a possibility to achieve the maximum mechanical capabilities of composite material due to the thing that reinforcement pattern is not distorted in the faces andthe faces stay plane[12].

    Geometrical backgrounds for high performance of the structures are:

    (1)Large concentration of vertical structural elements.

    (2)Large area of the faces in enveloping surfaces.

    (3)Uniform stiffness in two or three directions.

    (4)Uniform transformability in a few direction,that allows arranging them on bi-curvature surfaces[13].

    Figs.15,16 show quadra-and hexa-structure,that illustrate a possibility to develop sandwich bi-curvature shells.

    Fig.15 Quadra-structure

    Fig.16 Hexa-structure

    Fig.17 shows specimens of the cores from basalt reinforced plastic with quadra-and hexastructure,that are manufactured using synchronous folding technology[14,15].

    6 Conclusions

    A technological idea of cellular cores manufactured using the folding method for sandwich panels is suggested.

    Also,a method of classification of polar structures with various degrees of axial symmetry is developed.This classification is based on selecting the simplest structures as maternal ones.And all other structures are developed from maternal via a set of standard modification methods.

    Fig.17 Examples of basalt reinforced plastic cores

    Erom a practical point of view,polar structures are quite promising,because it is possible to forecast high mechanical properties.Besides, while being plane in initial state,they can be arranged on a bi-curvature surface.

    Acknowledgement

    This work was supported by the Ministry of Education and Science of Russian Eederation(No.REMEEI57414-X0078).

    [1] KHALIULIN V I,SHAPAEV I I.Technology of composite parts manufacturing[M].Kazan:[s.n.], 2004.(in Russian)

    [2] KHALIULIN V I.Technological schemes of sandwich panels manufacturing[M].Kazan:[s.n.], 1999.(in Russian)

    [3] SEBASTIAN E.Aluminum foldcores for sandwich structure application:Mechanical properties and EE-simulation[J].Thin-Walled Structures,2015,90: 31-41.

    [4] VEIL G.Symmetry[M].Moscow:[s.n.],1968. (in Russian)

    [5] KHALIULIN V I.Classification of regular row-arranged folded structures[J].Russian Aeronautics, 2003,46(2):8-17.(in Russian)

    [6] KHALIULIN V I,INKIN V A.Calculation of process variables at composite Z-crimp shaping using the folding method[J].Russian Aeronautics,2012, 55(4):417-423.

    [7] DVOEGLAZOV I V,KHALIULIN V I.A study ofZ-crimp structural parameters impact on strength under transverse compression and longitudinal shear [J].Russian Aeronautics,2013,56(1):15-21.

    [8] SHABALIN L P,SIDOROV I N,KHALIULIN V I.Simulation of Z-crimp shaping with the use of the ANSYS finite element software[J].Russian Aeronautics,2010,53(3):339-344.

    [9] WANG Z,KHALIULIN V I,SKRIPKIN E.Geometry design method of folded structure[J].Journal of Nanjing University of Aeronautics and Astronautics, 2002,34(1):6-9.(in Chinese)

    [10]KHALIULIN V I.A technique for synthesizing the structures of folded cores of sandwich panels[J]. Russian Aeronautics,2005,48(1):7-12

    [11]KHALIULIN V I,DVOYEGLAZOV I V.On technological problems of fabrication of relief designs by isometric transformation of thin sheet[J].Transactions of Nanjing University of Aeronautics and Astronautics,2001,18(1):11-16.

    [12]SHABALIN L P,GORELOV A V,SIDOROV I N, et al.Calculation of the parameters of stress-strain and ultimate states of composite foldcores under transverse compression and shear[J].Mechanics of Composite Materials,2012,48(4):415-426.

    [13]RAZDAIBEDIN A A,KHALIULIN V I.Determination of processing parameters for the folded core with enveloping curvilinear surface[J].Russian Aeronautics,2015,58(1):88-95.

    [14]KHALIULIN V I,BATRAKOV V V.Technological schemes of Zigzag crimp shaping[J].Russian Aeronautics,2005,48(2):106-114.

    [15]KHALIULIN V I,RAZDAIBEDIN A A,MENYASHKIN D G.Evaluation of influence of processing parameter instability on the accuracy of folded cores[J].Russian Aeronautics,2005,48(3):94-101.

    Prof.Valentin Khaliulin received Ph.D.and Doctor degrees in engineering from Kazan Aviation Institute,Kazan, Russia,in 1979 and 1997,respectively.Erom 1973 to present,he has been with the Aircraft Manufacturing Department,Kazan National Research Technical University n.a.A.N.Tupolev-KAI(KNRTU-KAI),where he is currently a full professor,the Head of Aircraft Manufacturing Department and the Head of the Center of Composite Technology.His research is focused on the technology of lightweight structures,such as folded cores for sandwich panels,and composite parts with high degree of integrity. Prof.Wang Zhijin received B.S.degree in airplane design from Nanjing Aviation Institute in 1983 and Ph.D.degree in design of flight vehicle from Moscow Aviation Institute. She joined in Nanjing University of Aeronautics and Astronautics in September 1983.Erom September 2007 to December 2007,she was a visiting scholar in the″MATI″-Russian State University of Aviation Technology named after K.E.Tsiolkovsky.Her research is focused on optimization of composite structure,design of light-weight structure and thermal structure design.

    Ms.Gershtein E M graduated from Kazan State Technical University n.a.A.N.Tupolev,Kazan,Russia,in 2008. In October 2008,she joined in the Aircraft Manufacturing Department,Kazan National Research Technical University n.a.A.N.Tupolev-KAI,Kazan,Russia,as an engineer. In October 2013,she became a lead engineer and a postgraduate student at the Aircraft Manufacturing Department.Her research is focused on the technology of lightweight structures,such as folded cores for sandwich panels.

    (Executive Editor:Xu Chengting)

    V258 Document code:A Article ID:1005-1120(2016)05-0519-10

    (Received 11 July 2016;revised 9 August 2016;accepted 9 September 2016)

    久久久久久久大尺度免费视频| 中文欧美无线码| 在线播放无遮挡| 黄色欧美视频在线观看| 97超视频在线观看视频| 大陆偷拍与自拍| 亚洲精品乱码久久久v下载方式| 日本av手机在线免费观看| 久久亚洲国产成人精品v| 国产人妻一区二区三区在| 成人特级av手机在线观看| 午夜日本视频在线| 少妇高潮的动态图| 亚洲av成人精品一区久久| 最近的中文字幕免费完整| 在线观看国产h片| 日韩精品有码人妻一区| 插逼视频在线观看| 午夜精品一区二区三区免费看| 国产视频内射| 18禁裸乳无遮挡免费网站照片| 夫妻午夜视频| 亚洲欧美成人综合另类久久久| 欧美 日韩 精品 国产| 免费大片18禁| 中文欧美无线码| 亚洲av日韩在线播放| 人人妻人人爽人人添夜夜欢视频 | 99热网站在线观看| 国产午夜福利久久久久久| 国产男人的电影天堂91| 99久久精品热视频| 日本黄大片高清| 亚洲不卡免费看| 夫妻午夜视频| 亚洲欧美日韩东京热| 亚洲人成网站高清观看| 国产毛片a区久久久久| 国产91av在线免费观看| 午夜福利视频1000在线观看| 搡老乐熟女国产| 日本猛色少妇xxxxx猛交久久| 国内精品美女久久久久久| 一级av片app| 丰满少妇做爰视频| 久久久久久国产a免费观看| 国产有黄有色有爽视频| 欧美成人午夜免费资源| 亚洲精品影视一区二区三区av| 亚洲内射少妇av| 国产国拍精品亚洲av在线观看| 亚洲av.av天堂| 激情五月婷婷亚洲| 国产精品一及| 成年女人看的毛片在线观看| 大香蕉久久网| 狂野欧美激情性bbbbbb| 日韩成人av中文字幕在线观看| 亚洲av免费在线观看| 久久99精品国语久久久| 三级男女做爰猛烈吃奶摸视频| 尤物成人国产欧美一区二区三区| 在线 av 中文字幕| 精品少妇久久久久久888优播| 精品久久久久久电影网| 精品人妻偷拍中文字幕| 久久久久久久久久久免费av| 秋霞伦理黄片| 欧美高清性xxxxhd video| 国产成人aa在线观看| 69av精品久久久久久| 一级a做视频免费观看| 亚洲综合色惰| 少妇人妻一区二区三区视频| 国产永久视频网站| 九九在线视频观看精品| 内射极品少妇av片p| 一级毛片aaaaaa免费看小| 久久精品国产a三级三级三级| 亚洲欧美日韩另类电影网站 | 极品教师在线视频| 成人二区视频| av在线天堂中文字幕| 日韩欧美 国产精品| 波多野结衣巨乳人妻| 久久精品国产亚洲av天美| 99热6这里只有精品| 99久久精品国产国产毛片| 男女国产视频网站| 亚洲激情五月婷婷啪啪| 亚洲无线观看免费| 直男gayav资源| 狂野欧美激情性bbbbbb| 日韩欧美精品免费久久| 69人妻影院| 久久人人爽人人爽人人片va| 亚洲怡红院男人天堂| 精华霜和精华液先用哪个| 精品人妻视频免费看| 久久久久久九九精品二区国产| 全区人妻精品视频| 久久久a久久爽久久v久久| 极品教师在线视频| 日本黄色片子视频| 精品一区二区三区视频在线| 日本一二三区视频观看| 亚洲精品国产av成人精品| 啦啦啦中文免费视频观看日本| 丰满人妻一区二区三区视频av| 深夜a级毛片| 精品人妻偷拍中文字幕| 肉色欧美久久久久久久蜜桃 | 日韩不卡一区二区三区视频在线| 草草在线视频免费看| 我的老师免费观看完整版| 成年版毛片免费区| 国产熟女欧美一区二区| 国产老妇女一区| 国产毛片在线视频| 伊人久久精品亚洲午夜| 秋霞伦理黄片| 欧美人与善性xxx| 美女高潮的动态| 一级毛片我不卡| 黑人高潮一二区| 午夜福利在线在线| 成人亚洲欧美一区二区av| 国产色爽女视频免费观看| 成人亚洲精品av一区二区| 日韩 亚洲 欧美在线| 国产精品99久久99久久久不卡 | 亚洲国产色片| 美女cb高潮喷水在线观看| 亚洲综合精品二区| 啦啦啦中文免费视频观看日本| 狂野欧美激情性xxxx在线观看| 亚洲内射少妇av| 亚洲av成人精品一二三区| 七月丁香在线播放| 免费看a级黄色片| 身体一侧抽搐| 在线天堂最新版资源| 国产毛片在线视频| 亚洲av成人精品一区久久| 狂野欧美白嫩少妇大欣赏| 久久精品久久久久久久性| 狂野欧美白嫩少妇大欣赏| 美女cb高潮喷水在线观看| 国产av国产精品国产| 性色avwww在线观看| 国产免费一区二区三区四区乱码| 中国国产av一级| 久久人人爽av亚洲精品天堂 | 国产真实伦视频高清在线观看| 亚洲av中文av极速乱| 中文字幕av成人在线电影| 国产女主播在线喷水免费视频网站| 精品国产露脸久久av麻豆| 亚洲经典国产精华液单| 久久久久久久久久成人| 国产一级毛片在线| 毛片一级片免费看久久久久| 日韩欧美精品v在线| 在线天堂最新版资源| 国产又色又爽无遮挡免| 一级毛片aaaaaa免费看小| 97超碰精品成人国产| 伊人久久精品亚洲午夜| 亚洲精品乱码久久久v下载方式| 免费观看在线日韩| 午夜免费男女啪啪视频观看| 成年女人在线观看亚洲视频 | 亚洲欧美一区二区三区黑人 | 一个人看视频在线观看www免费| 国产精品不卡视频一区二区| 午夜免费观看性视频| 欧美潮喷喷水| 成人午夜精彩视频在线观看| 日韩欧美一区视频在线观看 | 99久久精品热视频| 日韩制服骚丝袜av| 免费av毛片视频| 免费av毛片视频| 自拍欧美九色日韩亚洲蝌蚪91 | 丝袜喷水一区| 成人综合一区亚洲| 日本一本二区三区精品| 波多野结衣巨乳人妻| 亚洲欧美日韩东京热| 成人免费观看视频高清| 白带黄色成豆腐渣| av.在线天堂| 免费看a级黄色片| 菩萨蛮人人尽说江南好唐韦庄| 99热网站在线观看| 高清av免费在线| 欧美少妇被猛烈插入视频| 亚洲精品aⅴ在线观看| 制服丝袜香蕉在线| 中文天堂在线官网| 中文字幕av成人在线电影| av国产免费在线观看| 婷婷色麻豆天堂久久| 日韩中字成人| 18禁裸乳无遮挡动漫免费视频 | 毛片女人毛片| 在线 av 中文字幕| 99热全是精品| 在线亚洲精品国产二区图片欧美 | 久久国内精品自在自线图片| 好男人在线观看高清免费视频| 六月丁香七月| 18禁裸乳无遮挡动漫免费视频 | 久久久久久国产a免费观看| 国产精品国产三级专区第一集| 一个人看视频在线观看www免费| 天堂网av新在线| 色视频www国产| 国产 精品1| 亚洲av电影在线观看一区二区三区 | av国产久精品久网站免费入址| www.色视频.com| 欧美日韩一区二区视频在线观看视频在线 | 国产成人精品婷婷| 寂寞人妻少妇视频99o| 亚洲丝袜综合中文字幕| 亚洲精品第二区| 欧美zozozo另类| 亚洲aⅴ乱码一区二区在线播放| 亚洲最大成人手机在线| 亚洲国产成人一精品久久久| av在线亚洲专区| 国产精品一区二区性色av| 免费观看在线日韩| 国产黄片美女视频| 亚洲成色77777| 2021天堂中文幕一二区在线观| 日韩欧美一区视频在线观看 | 人妻制服诱惑在线中文字幕| 交换朋友夫妻互换小说| 2018国产大陆天天弄谢| 久久久久久久久大av| 亚洲欧美精品专区久久| 国产精品秋霞免费鲁丝片| 精品久久国产蜜桃| 国产综合精华液| 亚洲国产色片| 午夜精品一区二区三区免费看| 色综合色国产| 我的老师免费观看完整版| 国产一区二区三区av在线| 国产欧美另类精品又又久久亚洲欧美| av国产久精品久网站免费入址| 国产 一区 欧美 日韩| 一个人看的www免费观看视频| 亚洲精品久久久久久婷婷小说| 日本色播在线视频| 少妇被粗大猛烈的视频| 国产成人精品久久久久久| 免费黄网站久久成人精品| 欧美3d第一页| 亚洲精品乱码久久久v下载方式| 中文字幕久久专区| 内地一区二区视频在线| 婷婷色综合www| 一级a做视频免费观看| 2022亚洲国产成人精品| 国产极品天堂在线| 菩萨蛮人人尽说江南好唐韦庄| 欧美精品一区二区大全| 欧美xxⅹ黑人| 神马国产精品三级电影在线观看| 99久久精品热视频| 爱豆传媒免费全集在线观看| 视频中文字幕在线观看| 国精品久久久久久国模美| 嫩草影院入口| 欧美性感艳星| 欧美日韩精品成人综合77777| av.在线天堂| 伊人久久精品亚洲午夜| 午夜免费男女啪啪视频观看| 国产综合懂色| 在线亚洲精品国产二区图片欧美 | tube8黄色片| 国产精品蜜桃在线观看| 少妇人妻精品综合一区二区| 毛片女人毛片| 亚洲精品影视一区二区三区av| 舔av片在线| 欧美zozozo另类| 久久精品夜色国产| 涩涩av久久男人的天堂| 五月开心婷婷网| 欧美日韩在线观看h| 偷拍熟女少妇极品色| 婷婷色av中文字幕| 国产 一区 欧美 日韩| 99久久九九国产精品国产免费| 午夜福利在线在线| 国产男人的电影天堂91| 能在线免费看毛片的网站| 欧美3d第一页| 人人妻人人看人人澡| 日本黄大片高清| 菩萨蛮人人尽说江南好唐韦庄| 久久人人爽av亚洲精品天堂 | 亚洲aⅴ乱码一区二区在线播放| 一级黄片播放器| 国产伦精品一区二区三区四那| 国产有黄有色有爽视频| 日韩精品有码人妻一区| 久久6这里有精品| 男人和女人高潮做爰伦理| 蜜桃久久精品国产亚洲av| 国产91av在线免费观看| 免费黄频网站在线观看国产| 91精品一卡2卡3卡4卡| 男女啪啪激烈高潮av片| 亚洲av福利一区| 亚洲欧美中文字幕日韩二区| 99re6热这里在线精品视频| 99热国产这里只有精品6| 国语对白做爰xxxⅹ性视频网站| 亚洲在线观看片| 神马国产精品三级电影在线观看| 视频中文字幕在线观看| 熟妇人妻不卡中文字幕| 欧美日本视频| 国产成人a∨麻豆精品| 亚洲精品久久午夜乱码| h日本视频在线播放| 国产日韩欧美在线精品| 大又大粗又爽又黄少妇毛片口| 搞女人的毛片| 日本黄大片高清| 少妇人妻 视频| 听说在线观看完整版免费高清| 最后的刺客免费高清国语| 狂野欧美激情性bbbbbb| 亚洲精品中文字幕在线视频 | 午夜精品国产一区二区电影 | 高清视频免费观看一区二区| 永久网站在线| eeuss影院久久| 国产黄a三级三级三级人| 嫩草影院入口| 建设人人有责人人尽责人人享有的 | 精品人妻一区二区三区麻豆| 人妻 亚洲 视频| 九九在线视频观看精品| 欧美日韩精品成人综合77777| 中国三级夫妇交换| 性插视频无遮挡在线免费观看| 麻豆乱淫一区二区| 在线观看一区二区三区激情| 欧美日韩综合久久久久久| 我的女老师完整版在线观看| 禁无遮挡网站| 日本一本二区三区精品| 亚洲成色77777| 亚洲自拍偷在线| 丰满乱子伦码专区| 国产亚洲av嫩草精品影院| 中文在线观看免费www的网站| 插逼视频在线观看| 日韩中字成人| 亚洲精品国产色婷婷电影| 最近的中文字幕免费完整| 午夜精品一区二区三区免费看| av.在线天堂| 亚洲av.av天堂| 大片免费播放器 马上看| 香蕉精品网在线| 亚洲国产精品999| 国产精品伦人一区二区| 又黄又爽又刺激的免费视频.| 国产精品一区二区在线观看99| 少妇被粗大猛烈的视频| 亚洲最大成人av| 亚洲精品第二区| 日韩在线高清观看一区二区三区| 中文字幕av成人在线电影| 又粗又硬又长又爽又黄的视频| 性色avwww在线观看| 如何舔出高潮| 在线播放无遮挡| 亚洲精品自拍成人| 狂野欧美激情性xxxx在线观看| 99久国产av精品国产电影| 国产 一区 欧美 日韩| 日本熟妇午夜| 欧美亚洲 丝袜 人妻 在线| 国产精品国产三级国产av玫瑰| 欧美zozozo另类| 国产亚洲一区二区精品| 少妇的逼水好多| 亚洲精品,欧美精品| 亚洲精品国产色婷婷电影| 午夜激情福利司机影院| 国产综合懂色| 亚洲成色77777| 久久久成人免费电影| 女人十人毛片免费观看3o分钟| 国产69精品久久久久777片| 在线播放无遮挡| 国产黄色免费在线视频| 亚洲最大成人av| 亚洲精品中文字幕在线视频 | 久久亚洲国产成人精品v| 国产极品天堂在线| 久久人人爽人人爽人人片va| 春色校园在线视频观看| 又黄又爽又刺激的免费视频.| 色网站视频免费| 久久久成人免费电影| 欧美成人a在线观看| 国产精品蜜桃在线观看| 亚洲,欧美,日韩| 亚洲精品成人久久久久久| 少妇裸体淫交视频免费看高清| 欧美3d第一页| av天堂中文字幕网| 五月玫瑰六月丁香| 丝袜脚勾引网站| 日本一本二区三区精品| 22中文网久久字幕| 日本av手机在线免费观看| 熟妇人妻不卡中文字幕| 欧美最新免费一区二区三区| 日韩大片免费观看网站| 亚洲精品日本国产第一区| 国产精品麻豆人妻色哟哟久久| 国产黄片视频在线免费观看| 中文乱码字字幕精品一区二区三区| tube8黄色片| 制服丝袜香蕉在线| 免费电影在线观看免费观看| av在线播放精品| 一级av片app| 亚洲欧美日韩东京热| 精品久久久久久久久亚洲| 欧美少妇被猛烈插入视频| 国产片特级美女逼逼视频| 亚洲天堂国产精品一区在线| 久久久久久久久久人人人人人人| 亚洲自拍偷在线| 精品一区在线观看国产| 狂野欧美激情性bbbbbb| 联通29元200g的流量卡| 大陆偷拍与自拍| xxx大片免费视频| 老司机影院成人| 成人美女网站在线观看视频| 中文字幕av成人在线电影| 一级毛片电影观看| 日韩一区二区三区影片| 中文资源天堂在线| 免费看a级黄色片| 视频中文字幕在线观看| 韩国av在线不卡| 久久亚洲国产成人精品v| 亚洲欧美日韩无卡精品| 免费观看性生交大片5| av黄色大香蕉| 成年女人看的毛片在线观看| 国产精品一及| 午夜老司机福利剧场| 国产综合懂色| 麻豆久久精品国产亚洲av| 亚洲国产欧美在线一区| 亚洲四区av| 一级毛片aaaaaa免费看小| 精品人妻偷拍中文字幕| 激情五月婷婷亚洲| 午夜激情福利司机影院| 国产伦理片在线播放av一区| av播播在线观看一区| 大码成人一级视频| 日本爱情动作片www.在线观看| 天堂俺去俺来也www色官网| 亚洲,欧美,日韩| av免费观看日本| 色播亚洲综合网| 蜜桃久久精品国产亚洲av| 成年版毛片免费区| 成人国产av品久久久| 国产精品精品国产色婷婷| 免费电影在线观看免费观看| 日本熟妇午夜| 欧美日本视频| 亚洲天堂国产精品一区在线| 国产免费视频播放在线视频| 国产免费一级a男人的天堂| 美女被艹到高潮喷水动态| 精品亚洲乱码少妇综合久久| 特级一级黄色大片| 国产精品久久久久久精品电影| 午夜老司机福利剧场| 日韩电影二区| 久久久午夜欧美精品| 美女内射精品一级片tv| 中文字幕久久专区| 99热国产这里只有精品6| 亚洲精品日本国产第一区| 国产成人freesex在线| 在线观看三级黄色| 欧美成人精品欧美一级黄| 国产成人精品久久久久久| 视频中文字幕在线观看| 欧美97在线视频| 亚洲国产av新网站| 久久99热6这里只有精品| 美女脱内裤让男人舔精品视频| 搡老乐熟女国产| 青春草视频在线免费观看| 亚洲精品日韩av片在线观看| 国内精品宾馆在线| 人妻制服诱惑在线中文字幕| 国产亚洲午夜精品一区二区久久 | 久久精品人妻少妇| 男插女下体视频免费在线播放| 亚洲人成网站在线观看播放| 七月丁香在线播放| 亚洲人成网站在线播| 精品人妻偷拍中文字幕| 精品久久久精品久久久| 亚洲性久久影院| 我要看日韩黄色一级片| 日本一本二区三区精品| 国内揄拍国产精品人妻在线| 国产中年淑女户外野战色| 九九在线视频观看精品| 欧美激情在线99| 亚洲人成网站在线观看播放| 97超视频在线观看视频| 亚洲精品乱码久久久v下载方式| 汤姆久久久久久久影院中文字幕| 午夜老司机福利剧场| 看免费成人av毛片| 午夜免费鲁丝| 国产伦精品一区二区三区四那| 99热网站在线观看| 欧美丝袜亚洲另类| 亚洲欧美精品自产自拍| 免费观看无遮挡的男女| 日韩成人伦理影院| 一级片'在线观看视频| 在线播放无遮挡| 欧美精品国产亚洲| 九九爱精品视频在线观看| 亚洲成人精品中文字幕电影| 精品人妻熟女av久视频| 久久久久久久久久人人人人人人| 国产av国产精品国产| 国产毛片在线视频| 激情五月婷婷亚洲| 中文字幕久久专区| 各种免费的搞黄视频| 亚洲av在线观看美女高潮| 日韩欧美精品v在线| 精品一区二区三区视频在线| 色网站视频免费| 国产免费视频播放在线视频| 国产精品人妻久久久久久| 国产精品国产三级国产av玫瑰| 国产在线一区二区三区精| 国产精品成人在线| 中文乱码字字幕精品一区二区三区| 99视频精品全部免费 在线| 丝袜美腿在线中文| 国产探花极品一区二区| 一级毛片电影观看| 精品视频人人做人人爽| 国产国拍精品亚洲av在线观看| 免费黄频网站在线观看国产| 精品一区二区免费观看| 香蕉精品网在线| 男女边摸边吃奶| 在线免费观看不下载黄p国产| 国产免费福利视频在线观看| 18禁裸乳无遮挡免费网站照片| www.av在线官网国产| 日韩成人av中文字幕在线观看| 午夜视频国产福利| a级毛片免费高清观看在线播放| 国产欧美日韩精品一区二区| 黑人高潮一二区| 又黄又爽又刺激的免费视频.| 99久久中文字幕三级久久日本| 亚洲图色成人| 免费观看a级毛片全部| 嘟嘟电影网在线观看| 中文欧美无线码| 国产中年淑女户外野战色| 精品人妻偷拍中文字幕| 狂野欧美白嫩少妇大欣赏| 国产乱人视频| 亚洲欧美中文字幕日韩二区| 午夜福利在线观看免费完整高清在| 一本一本综合久久| 亚洲欧美一区二区三区黑人 | av在线播放精品| 伊人久久精品亚洲午夜| 欧美性猛交╳xxx乱大交人| 国产精品99久久久久久久久| 午夜免费鲁丝| 看免费成人av毛片| 久久97久久精品| 亚洲av二区三区四区| 国产精品久久久久久av不卡| 亚洲经典国产精华液单| 91在线精品国自产拍蜜月| 天天一区二区日本电影三级| xxx大片免费视频|